| # |
| # Copyright 2018 the original author or authors. |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # |
| |
| """ |
| vOLT-HA Unicast Test Case module |
| """ |
| |
| import time |
| import testCaseUtils |
| import logging |
| import subprocess |
| import json |
| |
| |
| class Unicast(object): |
| """ |
| This class implements voltha Unicast test case |
| """ |
| |
| PING_TEST_FILENAME = 'voltha_ping_test.log' |
| TCPDUMP_FILENAME = 'voltha_tcpdump.log' |
| |
| def __init__(self): |
| self.dirs = dict() |
| self.dirs['log'] = None |
| self.dirs['root'] = None |
| self.dirs['voltha'] = None |
| |
| self.__rgName = testCaseUtils.discover_rg_pod_name() |
| self.__fields = None |
| self.__tcpdumpPid = None |
| self.__onuType = None |
| self.__onuCount = None |
| self.__onuSerialNum = [] |
| self.__sadisCTag = None |
| self.__sadisSTag = None |
| self.__datastore = None |
| |
| def u_set_log_dirs(self, root_dir, voltha_dir, log_dir): |
| testCaseUtils.config_dirs(self, log_dir, root_dir, voltha_dir) |
| |
| def u_configure(self, onu_type, onu_count): |
| self.__onuType = onu_type |
| self.__onuCount = onu_count |
| |
| def execute_ping_test(self): |
| logging.info('Ping 1.2.3.4 IP Test') |
| process_output = open('%s/%s' % (testCaseUtils.get_dir(self, 'log'), self.PING_TEST_FILENAME), 'w') |
| pingTest = subprocess.Popen(['/usr/bin/kubectl', 'exec', '-it', '-n', 'voltha', self.__rgName, '--', |
| '/bin/ping', '-I', 'eth0', '1.2.3.4'], |
| stdout=process_output, |
| stderr=process_output) |
| |
| self.execute_tcpdump() |
| |
| self.kill_ping_test() |
| |
| pingTest.wait() |
| process_output.close() |
| |
| testCaseUtils.print_log_file(self, self.PING_TEST_FILENAME) |
| testCaseUtils.print_log_file(self, self.TCPDUMP_FILENAME) |
| print |
| |
| def execute_tcpdump(self): |
| logging.info('Execute tcpdump') |
| process_output = open('%s/%s' % (testCaseUtils.get_dir(self, 'log'), self.TCPDUMP_FILENAME), 'w') |
| tcpdump = subprocess.Popen(['sudo', '/usr/sbin/tcpdump', '-nei', 'pon1'], |
| stdout=process_output, |
| stderr=process_output) |
| self.__tcpdumpPid = tcpdump.pid |
| |
| time.sleep(20) |
| |
| self.kill_tcpdump() |
| tcpdump.wait() |
| process_output.close() |
| |
| def kill_ping_test(self): |
| procPidPing1 = subprocess.Popen(['/usr/bin/kubectl', 'exec', '-n', 'voltha', self.__rgName, '--', 'ps', '-ef'], |
| stdout=subprocess.PIPE, |
| stderr=subprocess.PIPE) |
| procPidPing2 = subprocess.Popen(['grep', '-e', '/bin/ping'], stdin=procPidPing1.stdout, |
| stdout=subprocess.PIPE, |
| stderr=subprocess.PIPE) |
| procPidPing3 = subprocess.Popen(['awk', "{print $2}"], stdin=procPidPing2.stdout, |
| stdout=subprocess.PIPE, |
| stderr=subprocess.PIPE) |
| |
| procPidPing1.stdout.close() |
| procPidPing2.stdout.close() |
| |
| out, err = procPidPing3.communicate() |
| pingPid = out.strip() |
| |
| procKillPing = subprocess.Popen(['/usr/bin/kubectl', 'exec', '-n', 'voltha', self.__rgName, '--', 'kill', pingPid], |
| stdout=subprocess.PIPE, |
| stderr=subprocess.PIPE) |
| out, err = procKillPing.communicate() |
| assert not err, 'Killing Ping returned %s' % err |
| |
| def kill_tcpdump(self): |
| procKillTcpdump = subprocess.Popen(['sudo', 'pkill', '-P', str(self.__tcpdumpPid)], |
| stdout=subprocess.PIPE, |
| stderr=subprocess.PIPE) |
| out, err = procKillTcpdump.communicate() |
| assert not err, 'Killing Tcpdump returned %s' % err |
| |
| def ping_test_should_have_failed(self): |
| statusLines = testCaseUtils.get_fields_from_grep_command(self, 'Destination Host Unreachable', self.PING_TEST_FILENAME) |
| assert statusLines, 'Ping Test Issue, no Destination Host Unreachable' |
| lineCount = 0 |
| lines = statusLines.splitlines() |
| for line in lines: |
| logging.debug(line) |
| lineCount += 1 |
| if lineCount > 1: # Must have 2 or more instances |
| return True |
| |
| def stag_and_ctag_should_match_sadis_entry(self): |
| logging.info('Evaluating sTag and cTag in each packet') |
| statusLines = testCaseUtils.get_fields_from_grep_command(self, '802.1Q', self.TCPDUMP_FILENAME) |
| assert statusLines, 'tcpdump contains no 802.1Q tagged packets' |
| lines = statusLines.splitlines() |
| for line in lines: |
| header, tagId, after = line.partition('802.1Q') |
| self.__fields = testCaseUtils.parse_fields(after, ',') |
| stag = self.__fields[1].strip().split(':')[1].strip().split()[1].strip() |
| before, tagId, after = line.rpartition('802.1Q') |
| self.__fields = testCaseUtils.parse_fields(after, ',') |
| ctag = self.__fields[1].strip().split()[1].strip() |
| self.stag_and_ctag_should_match_sadis_file(ctag, stag) |
| |
| def should_have_q_in_q_vlan_tagging(self): |
| statusLines = testCaseUtils.get_fields_from_grep_command(self, '"Request who-has"', self.TCPDUMP_FILENAME) |
| assert statusLines, 'tcpdump contains no ping packets' |
| lines = statusLines.splitlines() |
| for line in lines: |
| tagCount = line.count('802.1Q') |
| assert tagCount == 2, 'Found a non double tagged packet' |
| |
| def retrieve_onu_serial_numbers(self): |
| logging.info('Onu Serial Number Discovery') |
| statusLines = testCaseUtils.get_fields_from_grep_command(self, self.__onuType, 'voltha_devices_after_enable.log') |
| assert statusLines, 'No Onu listed under devices' |
| lines = statusLines.splitlines() |
| assert len(lines) == self.__onuCount, 'Onu count mismatch found: %s, should be: %s' % (len(lines), self.__onuCount) |
| for line in lines: |
| self.__fields = testCaseUtils.parse_fields(line, '|') |
| onuSerialNum = self.__fields[5].strip() |
| self.__onuSerialNum.append(onuSerialNum) |
| |
| def retrieve_stag_and_ctag_for_onu(self, onu_serial_num): |
| entries = self.__datastore['org.opencord.sadis']['sadis']['entries'] |
| for entry in entries: |
| entry_id = entry['id'] |
| if entry_id == onu_serial_num: |
| self.__sadisCTag = entry['cTag'] |
| self.__sadisSTag = entry['sTag'] |
| |
| def read_sadis_entries_from_sadis_json(self): |
| with open('%s/tests/atests/build/sadis_json' % testCaseUtils.get_dir(self, 'voltha'), 'r') as sadis: |
| self.__datastore = json.load(sadis) |
| |
| def stag_and_ctag_should_match_sadis_file(self, ctag, stag): |
| assert ctag == str(self.__sadisCTag) and stag == str(self.__sadisSTag), 'cTag and/or sTag do not match value in sadis file\n \ |
| vlan cTag = %s, sadis cTag = %s : vlan sTag = %s, sadis sTag = %s' % (ctag, self.__sadisCTag, stag, self.__sadisSTag) |
| |
| def manage_onu_testing(self): |
| for onuSerial in self.__onuSerialNum: |
| self.retrieve_stag_and_ctag_for_onu(onuSerial) |
| self.execute_ping_test() |
| self.ping_test_should_have_failed() |
| self.should_have_q_in_q_vlan_tagging() |
| self.stag_and_ctag_should_match_sadis_entry() |
| |
| |
| def run_test(onu_type, onu_count, root_dir, voltha_dir, log_dir): |
| |
| unicast = Unicast() |
| unicast.u_set_log_dirs(root_dir, voltha_dir, log_dir) |
| unicast.u_configure(onu_type, onu_count) |
| unicast.read_sadis_entries_from_sadis_json() |
| unicast.retrieve_onu_serial_numbers() |
| unicast.manage_onu_testing() |