| # |
| # Copyright 2016 the original author or authors. |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # |
| |
| """ |
| A module that can send and receive raw ethernet frames on a set of interfaces |
| and it can manage a set of vlan interfaces on top of existing |
| interfaces. Due to reliance on raw sockets, this module requires |
| root access. Also, raw sockets are hard to deal with in Twisted (not |
| directly supported) we need to run the receiver select loop on a dedicated |
| thread. |
| """ |
| |
| import os |
| import socket |
| import struct |
| from pcapy import BPFProgram |
| from threading import Thread, Condition |
| |
| import fcntl |
| |
| import select |
| import structlog |
| import sys |
| |
| from scapy.data import ETH_P_ALL |
| from twisted.internet import reactor |
| from zope.interface import implementer |
| |
| from voltha.registry import IComponent |
| |
| if sys.platform.startswith('linux'): |
| from common.frameio.third_party.oftest import afpacket, netutils |
| elif sys.platform == 'darwin': |
| from scapy.arch import pcapdnet, BIOCIMMEDIATE, dnet |
| |
| log = structlog.get_logger() |
| |
| |
| def hexify(buffer): |
| """ |
| Return a hexadecimal string encoding of input buffer |
| """ |
| return ''.join('%02x' % ord(c) for c in buffer) |
| |
| |
| class _SelectWakerDescriptor(object): |
| """ |
| A descriptor that can be mixed into a select loop to wake it up. |
| """ |
| def __init__(self): |
| self.pipe_read, self.pipe_write = os.pipe() |
| fcntl.fcntl(self.pipe_write, fcntl.F_SETFL, os.O_NONBLOCK) |
| |
| def __del__(self): |
| os.close(self.pipe_read) |
| os.close(self.pipe_write) |
| |
| def fileno(self): |
| return self.pipe_read |
| |
| def wait(self): |
| os.read(self.pipe_read, 1) |
| |
| def notify(self): |
| """Trigger a select loop""" |
| os.write(self.pipe_write, '\x00') |
| |
| |
| class BpfProgramFilter(object): |
| """ |
| Convenience packet filter based on the well-tried Berkeley Packet Filter, |
| used by many well known open source tools such as pcap and tcpdump. |
| """ |
| def __init__(self, program_string): |
| """ |
| Create a filter using the BPF command syntax. To learn more, |
| consult 'man pcap-filter'. |
| :param program_string: The textual definition of the filter. Examples: |
| 'vlan 1000' |
| 'vlan 1000 and ip src host 10.10.10.10' |
| """ |
| self.bpf = BPFProgram(program_string) |
| |
| def __call__(self, frame): |
| """ |
| Return 1 if frame passes filter. |
| :param frame: Raw frame provided as Python string |
| :return: 1 if frame satisfies filter, 0 otherwise. |
| """ |
| return self.bpf.filter(frame) |
| |
| |
| class FrameIOPort(object): |
| """ |
| Represents a network interface which we can send/receive raw |
| Ethernet frames. |
| """ |
| |
| RCV_SIZE_DEFAULT = 4096 |
| ETH_P_ALL = 0x03 |
| RCV_TIMEOUT = 10000 |
| |
| def __init__(self, iface_name, callback, filter=None): |
| self.iface_name = iface_name |
| self.callback = callback |
| self.filter = filter |
| self.socket = self.open_socket(self.iface_name) |
| log.debug('socket-opened', fn=self.fileno(), iface=iface_name) |
| self.received = 0 |
| self.discarded = 0 |
| |
| def open_sockets(self, iface_name): |
| raise NotImplementedError('to be implemented by derived class') |
| |
| def rcv_frame(self): |
| raise NotImplementedError('to be implemented by derived class') |
| |
| def __del__(self): |
| if self.socket: |
| self.socket.close() |
| self.socket = None |
| log.debug('socket-closed', iface=self.iface_name) |
| |
| def fileno(self): |
| return self.socket.fileno() |
| |
| def _dispatch(self, frame): |
| log.debug('calling-publisher', frame=hexify(frame)) |
| self.callback(self, frame) |
| |
| def recv(self): |
| """Called on the select thread when a packet arrives""" |
| try: |
| frame = self.rcv_frame() |
| except RuntimeError, e: |
| # we observed this happens sometimes right after the socket was |
| # attached to a newly created veth interface. So we log it, but |
| # allow to continue. |
| log.warn('afpacket-recv-error', code=-1) |
| return |
| |
| log.debug('frame-received', iface=self.iface_name, len=len(frame), |
| hex=hexify(frame)) |
| self.received +=1 |
| if self.filter is None or self.filter(frame): |
| log.debug('frame-dispatched') |
| reactor.callFromThread(self._dispatch, frame) |
| else: |
| self.discarded += 1 |
| log.debug('frame-discarded') |
| |
| def send(self, frame): |
| log.debug('sending', len=len(frame), iface=self.iface_name) |
| sent_bytes = self.send_frame(frame) |
| if sent_bytes != len(frame): |
| log.error('send-error', iface=self.iface_name, |
| wanted_to_send=len(frame), actually_sent=sent_bytes) |
| return sent_bytes |
| |
| def send_frame(self, frame): |
| return self.socket.send(frame) |
| |
| def up(self): |
| if sys.platform.startswith('darwin'): |
| pass |
| else: |
| os.system('ip link set {} up'.format(self.iface_name)) |
| return self |
| |
| def down(self): |
| if sys.platform.startswith('darwin'): |
| pass |
| else: |
| os.system('ip link set {} down'.format(self.iface_name)) |
| return self |
| |
| def statistics(self): |
| return self.received, self.discarded |
| |
| |
| class LinuxFrameIOPort(FrameIOPort): |
| |
| def open_socket(self, iface_name): |
| s = socket.socket(socket.AF_PACKET, socket.SOCK_RAW, 0) |
| afpacket.enable_auxdata(s) |
| s.bind((self.iface_name, self.ETH_P_ALL)) |
| netutils.set_promisc(s, iface_name) |
| s.settimeout(self.RCV_TIMEOUT) |
| return s |
| |
| def rcv_frame(self): |
| return afpacket.recv(self.socket, self.RCV_SIZE_DEFAULT) |
| |
| |
| class DarwinFrameIOPort(FrameIOPort): |
| |
| def open_socket(self, iface_name): |
| sin = pcapdnet.open_pcap(iface_name, 1600, 1, 100) |
| try: |
| fcntl.ioctl(sin.fileno(), BIOCIMMEDIATE, struct.pack("I",1)) |
| except: |
| pass |
| |
| # need a different kind of socket for sending out |
| self.sout = dnet.eth(iface_name) |
| |
| return sin |
| |
| def send_frame(self, frame): |
| return self.sout.send(frame) |
| |
| def rcv_frame(self): |
| pkt = self.socket.next() |
| if pkt is not None: |
| ts, pkt = pkt |
| return pkt |
| |
| |
| if sys.platform == 'darwin': |
| _FrameIOPort = DarwinFrameIOPort |
| elif sys.platform.startswith('linux'): |
| _FrameIOPort = LinuxFrameIOPort |
| else: |
| raise Exception('Unsupported platform {}'.format(sys.platform)) |
| sys.exit(1) |
| |
| |
| @implementer(IComponent) |
| class FrameIOManager(Thread): |
| """ |
| Packet/Frame IO manager that can be used to send/receive raw frames |
| on a set of network interfaces. |
| """ |
| def __init__(self): |
| super(FrameIOManager, self).__init__() |
| |
| self.ports = {} # iface_name -> ActiveFrameReceiver |
| self.queue = {} # iface_name -> TODO |
| |
| self.cvar = Condition() |
| self.waker = _SelectWakerDescriptor() |
| self.stopped = False |
| self.ports_changed = False |
| |
| # ~~~~~~~~~~~ exposed methods callable from main thread ~~~~~~~~~~~~~~~~~~~ |
| |
| def start(self): |
| """ |
| Start the IO manager and its select loop thread |
| """ |
| log.debug('starting') |
| super(FrameIOManager, self).start() |
| log.info('started') |
| return self |
| |
| def stop(self): |
| """ |
| Stop the IO manager and its thread with the select loop |
| """ |
| log.debug('stopping') |
| self.stopped = True |
| self.waker.notify() |
| self.join() |
| del self.ports |
| log.info('stopped') |
| |
| def list_interfaces(self): |
| """ |
| Return list of interfaces listened on |
| :return: List of FrameIOPort objects |
| """ |
| return self.ports |
| |
| def add_interface(self, iface_name, callback, filter=None): |
| """ |
| Add a new interface and start receiving on it. |
| :param iface_name: Name of the interface. Must be an existing Unix |
| interface (eth0, en0, etc.) |
| :param callback: Called on each received frame; |
| signature: def callback(port, frame) where port is the FrameIOPort |
| instance at which the frame was received, frame is the actual frame |
| received (as binay string) |
| :param filter: An optional filter (predicate), with signature: |
| def filter(frame). If provided, only frames for which filter evaluates |
| to True will be forwarded to callback. |
| :return: FrmaeIOPort instance. |
| """ |
| """Add a new interface""" |
| assert iface_name not in self.ports |
| port = _FrameIOPort(iface_name, callback, filter) |
| self.ports[iface_name] = port |
| # need to exit select loop to reconstruct select fd lists |
| self.ports_changed = True |
| self.waker.notify() |
| return port |
| |
| def del_interface(self, iface_name): |
| """ |
| Stop and remove named interface |
| :param iface_name: Name of previoysly registered interface |
| :return: None |
| """ |
| assert iface_name in self.ports |
| port = self.ports[iface_name] |
| del self.ports[iface_name] |
| # need to exit select loop to reconstruct select fd lists |
| self.ports_changed = True |
| self.waker.notify() |
| |
| def send(self, iface_name, frame): |
| """ |
| Send frame on given interface |
| :param iface_name: Name of previously registered interface |
| :param frame: frame as string |
| :return: number of bytes sent |
| """ |
| return self.ports[iface_name].send(frame) |
| |
| # ~~~~~~~~~~~~~ Thread methods (running on non-main thread ~~~~~~~~~~~~~~~~ |
| |
| def run(self): |
| """ |
| Called on the alien thread, this is the core multi-port receive loop |
| """ |
| |
| log.debug('select-loop-started') |
| |
| # outer loop constructs sockets list for select |
| while not self.stopped: |
| sockets = [self.waker] + self.ports.values() |
| self.ports_changed = False |
| empty = [] |
| # inner select loop |
| |
| while not self.stopped: |
| try: |
| _in, _out, _err = select.select(sockets, empty, empty, 1) |
| except Exception, e: |
| log.exception('frame-io-select-error', e=e) |
| break |
| with self.cvar: |
| for port in _in: |
| if port is self.waker: |
| self.waker.wait() |
| continue |
| else: |
| port.recv() |
| self.cvar.notify_all() |
| if self.ports_changed: |
| break # break inner loop so we reconstruct sockets list |
| |
| log.debug('select-loop-exited') |