blob: 28502c1238bafecf5c77ac1dac8c27d87bdbfbdf [file] [log] [blame]
#
# Copyright 2016 the original author or authors.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#
ifeq ($(VOLTHA_BASE)_set,_set)
$(error To get started, please source the env.sh file)
endif
include setup.mk
VENVDIR := venv-$(shell uname -s | tr '[:upper:]' '[:lower:]')
.PHONY: $(DIRS) $(DIRS_CLEAN) $(DIRS_FLAKE8) flake8 docker-base voltha chameleon ofagent podder netconf shovel onos
default: build
## New directories can be added here
DIRS:=\
voltha \
voltha/northbound/openflow \
voltha/northbound/openflow/agent \
voltha/northbound/openflow/oftest
## If one directory depends on another directory that
## dependency can be expressed here
##
## For example, if the Tibit directory depended on the eoam
## directory being built first, then that can be expressed here.
## driver/tibit: eoam
# Parallel Build
$(DIRS):
@echo " MK $@"
$(Q)$(MAKE) -C $@
# Parallel Clean
DIRS_CLEAN = $(addsuffix .clean,$(DIRS))
$(DIRS_CLEAN):
@echo " CLEAN $(basename $@)"
$(Q)$(MAKE) -C $(basename $@) clean
# Parallel Flake8
DIRS_FLAKE8 = $(addsuffix .flake8,$(DIRS))
$(DIRS_FLAKE8):
@echo " FLAKE8 $(basename $@)"
-$(Q)$(MAKE) -C $(basename $@) flake8
help:
@echo "Usage: make [<target>]"
@echo "where available targets are:"
@echo
@echo "build : Build the Voltha docker images (default target)"
@echo "clean : Remove files created by the build and tests"
@echo "distclean : Remove venv directory"
@echo "fetch : Pre-fetch artifacts for subsequent local builds"
@echo "flake8 : Run specifically flake8 tests"
@echo "help : Print this help"
@echo "protos : Compile all grpc/protobuf files"
@echo "rebuild-venv : Rebuild local Python virtualenv from scratch"
@echo "venv : Build local Python virtualenv if did not exist yet"
@echo "utest : Run all unit tests"
@echo "itest : Run all integration tests"
@echo
build: protos containers
containers: docker-base voltha chameleon ofagent podder netconf shovel onos tester config-push
docker-base:
docker build -t cord/voltha-base -f docker/Dockerfile.base .
voltha:
docker build -t cord/voltha -f docker/Dockerfile.voltha .
chameleon:
mkdir tmp.chameleon
cp -R chameleon/* tmp.chameleon
docker build -t cord/chameleon -f docker/Dockerfile.chameleon .
rm -rf tmp.chameleon
ofagent:
docker build -t cord/ofagent -f docker/Dockerfile.ofagent .
podder:
docker build -t cord/podder -f docker/Dockerfile.podder .
netconf:
docker build -t cord/netconf -f docker/Dockerfile.netconf .
shovel:
docker build -t cord/shovel -f docker/Dockerfile.shovel .
dashd:
docker build -t cord/dashd -f docker/Dockerfile.dashd .
vcli:
docker build -t cord/vcli -f docker/Dockerfile.cli .
onos:
docker build -t cord/onos -f docker/Dockerfile.onos docker
tester:
docker build -t cord/tester -f docker/Dockerfile.tester docker
config-push:
docker build -t cord/config-push -f docker/Dockerfile.configpush docker
protos:
make -C voltha/protos
make -C chameleon/protos
make -C ofagent/protos
make -C netconf/protos
install-protoc:
make -C voltha/protos install-protoc
clean:
find voltha -name '*.pyc' | xargs rm -f
distclean: clean
rm -rf ${VENVDIR}
fetch:
docker pull consul:latest
docker pull fluent/fluentd:latest
docker pull gliderlabs/registrator:latest
docker pull ubuntu:xenial
docker pull wurstmeister/kafka:latest
docker pull wurstmeister/zookeeper:latest
purge-venv:
rm -fr ${VENVDIR}
rebuild-venv: purge-venv venv
venv: ${VENVDIR}/.built
${VENVDIR}/.built:
@ virtualenv ${VENVDIR}
@ . ${VENVDIR}/bin/activate && \
pip install --upgrade pip; \
if ! pip install -r requirements.txt; \
then \
echo "On MAC OS X, if the installation failed with an error \n'<openssl/opensslv.h>': file not found,"; \
echo "see the BUILD.md file for a workaround"; \
else \
uname -s > ${VENVDIR}/.built; \
fi
test: venv protos run-as-root-tests
@ echo "Executing all tests"
. ${VENVDIR}/bin/activate && \
nosetests -s tests \
--exclude-dir=./tests/itests/run_as_root/
utest: venv protos
@ echo "Executing all unit tests"
. ${VENVDIR}/bin/activate && \
for d in $$(find ./tests/utests -depth -type d); do echo $$d:; nosetests $$d; done
utest-with-coverage: venv protos
@ echo "Executing all unit tests and producing coverage results"
. ${VENVDIR}/bin/activate && \
for d in $$(find ./tests/utests -depth -type d); do echo $$d:; \
nosetests --with-xcoverage --with-xunit --cover-package=voltha,common,ofagent,chameleon $$d; done
itest: venv run-as-root-tests
@ echo "Executing all integration tests"
. ${VENVDIR}/bin/activate && \
nosetests -s \
tests/itests/docutests/build_md_test.py \
--exclude-dir=./tests/utests/ \
--exclude-dir=./tests/itests/run_as_root/
smoke-test: venv run-as-root-tests
@ echo "Executing smoke tests"
. ${VENVDIR}/bin/activate && \
nosetests -s \
tests/itests/docutests/build_md_test.py:BuildMdTests.test_07_start_all_containers \
--exclude-dir=./tests/itests/run_as_root/
run-as-root-tests:
docker run -i --rm -v /cord/incubator/voltha:/voltha --privileged cord/voltha-base env PYTHONPATH=/voltha python /voltha/tests/itests/run_as_root/test_frameio.py
flake8: $(DIRS_FLAKE8)
# end file