tests/atests/common/testCaseUtils.py

#
# Copyright 2018 the original author or authors.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#      http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#

"""
vOLT-HA Test Case Utils module
"""
import time
import os
import commands
import subprocess
import pexpect
import sys
   
def configDirs(self, logDir, rootDir = None, volthaDir = None):
    self.dirs ['log'] = logDir
    self.dirs ['root'] = rootDir
    self.dirs ['voltha'] = volthaDir
    
def getDir(self, Dir):
    return self.dirs.get(Dir)
    
def removeLeadingLine(logDir, logFile):
    with open(logDir + '/' + logFile, 'r+') as file:
        lines = file.readlines()
        file.seek(0)
        lines = lines[1:]
        for line in lines:
            file.write(line)
        file.truncate()
        file.close()      

def send_command_to_voltha_cli(logDir, logFile1, cmd1, logFile2 = None, cmd2 = None, logFile3 = None, cmd3 = None):
    output = open(logDir + '/' + logFile1, 'w')
    child = pexpect.spawn('ssh -p 30110 -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no voltha@localhost')
    child.expect('[pP]assword:')
    child.sendline('admin')
    child.expect('\((\\x1b\[\d*;?\d+m){1,2}voltha(\\x1b\[\d*;?\d+m){1,2}\)')
    time.sleep(10)
    bytes = child.sendline(cmd1)
    i = child.expect(['\((\\x1b\[\d*;?\d+m){1,2}voltha(\\x1b\[\d*;?\d+m){1,2}\)',
    '\((\\x1b\[\d*;?\d+m){1,2}.*device [0-9a-f]{16}(\\x1b\[\d*;?\d+m){1,2}\)'])
    if i == 0:
        output.write(child.before)
        output.close()
        removeLeadingLine(logDir, logFile1)
    elif i == 1:
        if logFile2 != None and cmd2 != None:
            output = open(logDir + '/' + logFile2, 'w')
            bytes = child.sendline(cmd2)
            child.expect('\((\\x1b\[\d*;?\d+m){1,2}.*device [0-9a-f]{16}(\\x1b\[\d*;?\d+m){1,2}\)')
            output.write(child.before)
            output.close()
            removeLeadingLine(logDir, logFile2)
        if logFile3 != None and cmd3 != None:
            output = open(logDir + '/' + logFile3, 'w')
            bytes = child.sendline(cmd3)
            child.expect('\((\\x1b\[\d*;?\d+m){1,2}.*device [0-9a-f]{16}(\\x1b\[\d*;?\d+m){1,2}\)')
            output.write(child.before)
            output.close()
            removeLeadingLine(logDir, logFile3)
    child.close()

def send_command_to_onos_cli(logDir, cmd, logFile):
    output = open(logDir + '/' + logFile, 'w')
    child = pexpect.spawn('ssh -p 30115 -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no karaf@localhost')
    child.expect('[pP]assword:')
    child.sendline('karaf')
    child.expect('(\\x1b\[\d*;?\d+m){1,2}onos>(\\x1b\[\d*;?\d+m){1,2}')
    child.sendline('flows')
    child.expect('flows')
    child.expect('(\\x1b\[\d*;?\d+m){1,2}onos>(\\x1b\[\d*;?\d+m){1,2}')

    output.write(child.before)
    
    output.close()
    child.close()

def get_fields_from_grep_command(self, searchWord, logFile):
    grepCommand =\
        "grep %s %s/%s" % (searchWord, getDir(self, 'log'), logFile)  
    statusLines = commands.getstatusoutput(grepCommand)[1]
    return statusLines
    
def parseFields(statusLine):
    statusList = statusLine.split("|")
    return statusList

def printLogFile(self, logFile):
    with open(getDir(self, 'log') + '/' + logFile, 'r+') as file:
        lines = file.readlines()
        print
        for line in lines:
            sys.stdout.write (line)

def extractPodIpAddr(podName):
    proc1 = subprocess.Popen(['/usr/bin/kubectl', 'get', 'svc', '--all-namespaces'],
                             stdout=subprocess.PIPE,
                             stderr=subprocess.PIPE)
    proc2 = subprocess.Popen(['grep', '-e', podName], stdin=proc1.stdout,
                             stdout=subprocess.PIPE,
                             stderr=subprocess.PIPE)
    proc3 = subprocess.Popen(['awk', "{print $4}"], stdin=proc2.stdout,
                             stdout=subprocess.PIPE,
                             stderr=subprocess.PIPE)
                            
    proc1.stdout.close
    proc2.stdout.close
    out, err = proc3.communicate()
    return out
    
def extractRadiusIpAddr(podName):
    proc1 = subprocess.Popen(['/usr/bin/kubectl', 'describe', 'pod', '-n', 'voltha', podName],
                             stdout=subprocess.PIPE,
                             stderr=subprocess.PIPE)
    proc2 = subprocess.Popen(['grep', '^IP:'], stdin=proc1.stdout,
                             stdout=subprocess.PIPE,
                             stderr=subprocess.PIPE)
    proc3 = subprocess.Popen(['awk', "{print $2}"], stdin=proc2.stdout,
                             stdout=subprocess.PIPE,
                             stderr=subprocess.PIPE)
                            
    proc1.stdout.close
    proc2.stdout.close
    out, err = proc3.communicate()
    return out
    
def extractPodName(shortPodName):
    proc1 = subprocess.Popen(['/usr/bin/kubectl', 'get', 'pods', '--all-namespaces'],
                             stdout=subprocess.PIPE,
                             stderr=subprocess.PIPE)
    proc2 = subprocess.Popen(['grep', '-e', shortPodName], stdin=proc1.stdout,
                             stdout=subprocess.PIPE,
                             stderr=subprocess.PIPE)
    proc3 = subprocess.Popen(['awk', "{print $2}"], stdin=proc2.stdout,
                             stdout=subprocess.PIPE,
                             stderr=subprocess.PIPE)
                      
                      
    proc1.stdout.close
    proc2.stdout.close
    out, err = proc3.communicate()
    return out
    
def modifyRadiusIpInJsonUsingSed(self, newIpAddr):
    sedCommand ="sed -i '/radiusIp/c\  \"radiusIp\":\"'%s'\",' %s/tests/atests/build/aaa_json" % (newIpAddr, getDir(self, 'voltha'))
    status = commands.getstatusoutput(sedCommand)[0]
    return status