| # |
| # Copyright 2018 the original author or authors. |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # |
| from voltha.extensions.omci.tasks.task import Task |
| from twisted.internet import reactor |
| from twisted.internet.defer import inlineCallbacks, failure, returnValue |
| from voltha.extensions.omci.omci_defs import ReasonCodes, EntityOperations |
| from voltha.extensions.omci.omci_me import * |
| |
| RC = ReasonCodes |
| OP = EntityOperations |
| |
| |
| class BrcmVlanFilterException(Exception): |
| pass |
| |
| |
| class BrcmVlanFilterTask(Task): |
| """ |
| Apply Vlan Tagging Filter Data and Extended VLAN Tagging Operation Configuration on an ANI and UNI |
| """ |
| task_priority = 200 |
| name = "Broadcom VLAN Filter Task" |
| |
| def __init__(self, omci_agent, device_id, set_vlan_id, priority=task_priority): |
| """ |
| Class initialization |
| |
| :param omci_agent: (OmciAdapterAgent) OMCI Adapter agent |
| :param device_id: (str) ONU Device ID |
| :param set_vlan_id: (int) VLAN to filter for and set |
| :param priority: (int) OpenOMCI Task priority (0..255) 255 is the highest |
| """ |
| super(BrcmVlanFilterTask, self).__init__(BrcmVlanFilterTask.name, |
| omci_agent, |
| device_id, |
| priority=priority, |
| exclusive=False) |
| self._device = omci_agent.get_device(device_id) |
| self._set_vlan_id = set_vlan_id |
| self._results = None |
| self._local_deferred = None |
| self._config = self._device.configuration |
| |
| def cancel_deferred(self): |
| super(BrcmVlanFilterTask, self).cancel_deferred() |
| |
| d, self._local_deferred = self._local_deferred, None |
| try: |
| if d is not None and not d.called: |
| d.cancel() |
| except: |
| pass |
| |
| def start(self): |
| """ |
| Start Vlan Tagging Task |
| """ |
| super(BrcmVlanFilterTask, self).start() |
| self._local_deferred = reactor.callLater(0, self.perform_vlan_tagging) |
| |
| @inlineCallbacks |
| def perform_vlan_tagging(self): |
| """ |
| Perform the vlan tagging |
| """ |
| self.log.info('setting-vlan-tagging') |
| |
| try: |
| # TODO: parameterize these from the handler, or objects in the handler |
| # TODO: make this a member of the onu gem port or the uni port |
| _mac_bridge_service_profile_entity_id = 0x201 |
| _mac_bridge_port_ani_entity_id = 0x2102 # TODO: can we just use the entity id from the anis list? |
| |
| # Delete bridge ani side vlan filter |
| msg = VlanTaggingFilterDataFrame(_mac_bridge_port_ani_entity_id) |
| frame = msg.delete() |
| self.log.debug('openomci-msg', msg=msg) |
| self.strobe_watchdog() |
| results = yield self._device.omci_cc.send(frame) |
| self.check_status_and_state(results, 'flow-delete-vlan-tagging-filter-data') |
| |
| # Re-Create bridge ani side vlan filter |
| msg = VlanTaggingFilterDataFrame( |
| _mac_bridge_port_ani_entity_id, # Entity ID |
| vlan_tcis=[self._set_vlan_id], # VLAN IDs |
| forward_operation=0x10 |
| ) |
| frame = msg.create() |
| self.log.debug('openomci-msg', msg=msg) |
| self.strobe_watchdog() |
| results = yield self._device.omci_cc.send(frame) |
| self.check_status_and_state(results, 'flow-create-vlan-tagging-filter-data') |
| |
| # Update uni side extended vlan filter |
| # filter for untagged |
| # probably for eapol |
| # TODO: Create constants for the operation values. See omci spec |
| attributes = dict( |
| received_frame_vlan_tagging_operation_table= |
| VlanTaggingOperation( |
| filter_outer_priority=15, |
| filter_outer_vid=4096, |
| filter_outer_tpid_de=0, |
| |
| filter_inner_priority=15, |
| filter_inner_vid=4096, |
| filter_inner_tpid_de=0, |
| filter_ether_type=0, |
| |
| treatment_tags_to_remove=0, |
| treatment_outer_priority=15, |
| treatment_outer_vid=0, |
| treatment_outer_tpid_de=0, |
| |
| treatment_inner_priority=0, |
| treatment_inner_vid=self._set_vlan_id, |
| treatment_inner_tpid_de=4 |
| ) |
| ) |
| |
| msg = ExtendedVlanTaggingOperationConfigurationDataFrame( |
| _mac_bridge_service_profile_entity_id, # Bridge Entity ID |
| attributes=attributes # See above |
| ) |
| frame = msg.set() |
| self.log.debug('openomci-msg', msg=msg) |
| self.strobe_watchdog() |
| results = yield self._device.omci_cc.send(frame) |
| self.check_status_and_state(results, |
| 'flow-set-ext-vlan-tagging-op-config-data-untagged') |
| |
| # Update uni side extended vlan filter |
| # filter for vlan 0 |
| # TODO: Create constants for the operation values. See omci spec |
| attributes = dict( |
| received_frame_vlan_tagging_operation_table= |
| VlanTaggingOperation( |
| filter_outer_priority=15, # This entry is not a double-tag rule |
| filter_outer_vid=4096, # Do not filter on the outer VID value |
| filter_outer_tpid_de=0, # Do not filter on the outer TPID field |
| |
| filter_inner_priority=8, # Filter on inner vlan |
| filter_inner_vid=0x0, # Look for vlan 0 |
| filter_inner_tpid_de=0, # Do not filter on inner TPID field |
| filter_ether_type=0, # Do not filter on EtherType |
| |
| treatment_tags_to_remove=1, |
| treatment_outer_priority=15, |
| treatment_outer_vid=0, |
| treatment_outer_tpid_de=0, |
| |
| treatment_inner_priority=8, # Add an inner tag and insert this value as the priority |
| treatment_inner_vid=self._set_vlan_id, # use this value as the VID in the inner VLAN tag |
| treatment_inner_tpid_de=4, # set TPID |
| ) |
| ) |
| msg = ExtendedVlanTaggingOperationConfigurationDataFrame( |
| _mac_bridge_service_profile_entity_id, # Bridge Entity ID |
| attributes=attributes # See above |
| ) |
| frame = msg.set() |
| self.log.debug('openomci-msg', msg=msg) |
| self.strobe_watchdog() |
| results = yield self._device.omci_cc.send(frame) |
| self.check_status_and_state(results, |
| 'flow-set-ext-vlan-tagging-op-config-data-zero-tagged') |
| |
| self.deferred.callback(self) |
| |
| except Exception as e: |
| self.log.exception('setting-vlan-tagging', e=e) |
| self.deferred.errback(failure.Failure(e)) |
| |
| def check_status_and_state(self, results, operation=''): |
| """ |
| Check the results of an OMCI response. An exception is thrown |
| if the task was cancelled or an error was detected. |
| |
| :param results: (OmciFrame) OMCI Response frame |
| :param operation: (str) what operation was being performed |
| :return: True if successful, False if the entity existed (already created) |
| """ |
| |
| omci_msg = results.fields['omci_message'].fields |
| status = omci_msg['success_code'] |
| error_mask = omci_msg.get('parameter_error_attributes_mask', 'n/a') |
| failed_mask = omci_msg.get('failed_attributes_mask', 'n/a') |
| unsupported_mask = omci_msg.get('unsupported_attributes_mask', 'n/a') |
| |
| self.log.debug("OMCI Result:", operation, omci_msg=omci_msg, status=status, error_mask=error_mask, |
| failed_mask=failed_mask, unsupported_mask=unsupported_mask) |
| |
| if status == RC.Success: |
| self.strobe_watchdog() |
| return True |
| |
| elif status == RC.InstanceExists: |
| return False |