| # |
| # Copyright 2017 the original author or authors. |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # |
| |
| """ |
| DPoE ONU device adapter |
| """ |
| |
| import json |
| |
| from uuid import uuid4 |
| |
| import structlog |
| from zope.interface import implementer |
| |
| from binascii import hexlify |
| |
| from scapy.layers.inet import ICMP, IP |
| from scapy.layers.l2 import Ether, Dot1Q |
| from twisted.internet.defer import DeferredQueue, inlineCallbacks |
| from twisted.internet import reactor |
| |
| from voltha.core.flow_decomposer import * |
| from voltha.core.logical_device_agent import mac_str_to_tuple |
| |
| from voltha.adapters.interface import IAdapterInterface |
| from voltha.protos.adapter_pb2 import Adapter, AdapterConfig |
| from voltha.protos.device_pb2 import Port |
| from voltha.protos.device_pb2 import DeviceType, DeviceTypes |
| from voltha.protos.health_pb2 import HealthStatus |
| from voltha.protos.common_pb2 import LogLevel, ConnectStatus |
| from voltha.protos.common_pb2 import OperStatus, AdminState |
| |
| from voltha.protos.logical_device_pb2 import LogicalDevice, LogicalPort |
| from voltha.protos.openflow_13_pb2 import ofp_desc, ofp_port, OFPPF_10GB_FD, \ |
| OFPPF_FIBER, OFPPS_LIVE, ofp_switch_features, OFPC_PORT_STATS, \ |
| OFPC_GROUP_STATS, OFPC_TABLE_STATS, OFPC_FLOW_STATS |
| |
| from scapy.packet import Packet, bind_layers |
| from scapy.fields import StrField |
| |
| log = structlog.get_logger() |
| |
| from voltha.extensions.eoam.EOAM_TLV import AddStaticMacAddress, DeleteStaticMacAddress |
| from voltha.extensions.eoam.EOAM_TLV import ClearStaticMacTable |
| from voltha.extensions.eoam.EOAM_TLV import DeviceId |
| from voltha.extensions.eoam.EOAM_TLV import ClauseSubtypeEnum |
| from voltha.extensions.eoam.EOAM_TLV import RuleOperatorEnum |
| from voltha.extensions.eoam.EOAM_TLV import FirmwareInfo |
| |
| from voltha.extensions.eoam.EOAM import EOAMPayload, CablelabsOUI |
| from voltha.extensions.eoam.EOAM import DPoEOpcode_GetRequest, DPoEOpcode_SetRequest |
| |
| @implementer(IAdapterInterface) |
| class DPoEOnuAdapter(object): |
| |
| name = 'dpoe_onu' |
| |
| supported_device_types = [ |
| DeviceType( |
| id='dpoe_onu', |
| adapter=name, |
| accepts_bulk_flow_update=True |
| ) |
| ] |
| |
| def __init__(self, adapter_agent, config): |
| self.adapter_agent = adapter_agent |
| self.config = config |
| self.descriptor = Adapter( |
| id=self.name, |
| vendor='Sumitomo Electric, Inc.', |
| version='0.1', |
| config=AdapterConfig(log_level=LogLevel.INFO) |
| ) |
| self.incoming_messages = DeferredQueue() |
| |
| def start(self): |
| log.debug('starting') |
| log.info('started') |
| |
| def stop(self): |
| log.debug('stopping') |
| log.info('stopped') |
| |
| def adapter_descriptor(self): |
| return self.descriptor |
| |
| def device_types(self): |
| return DeviceTypes(items=self.supported_device_types) |
| |
| def health(self): |
| return HealthStatus(state=HealthStatus.HealthState.HEALTHY) |
| |
| def change_master_state(self, master): |
| raise NotImplementedError() |
| |
| def update_pm_config(self, device, pm_configs): |
| raise NotImplementedError() |
| |
| def adopt_device(self, device): |
| log.info('adopt-device', device=device) |
| reactor.callLater(0.1, self._onu_device_activation, device) |
| return device |
| |
| @inlineCallbacks |
| def _onu_device_activation(self, device): |
| # first we verify that we got parent reference and proxy info |
| assert device.parent_id |
| assert device.proxy_address.device_id |
| assert device.proxy_address.channel_id |
| |
| # TODO: For now, pretend that we were able to contact the device and obtain |
| # additional information about it. Should add real message. |
| device.vendor = 'Sumitomo Electric, Inc.' |
| device.model = '10G EPON ONU' |
| device.hardware_version = 'fa161020' |
| device.firmware_version = '16.12.02' |
| device.software_version = '1.0' |
| device.serial_number = uuid4().hex |
| device.connect_status = ConnectStatus.REACHABLE |
| self.adapter_agent.update_device(device) |
| |
| # then shortly after we create some ports for the device |
| uni_port = Port( |
| port_no=2, |
| label='UNI facing Ethernet port', |
| type=Port.ETHERNET_UNI, |
| admin_state=AdminState.ENABLED, |
| oper_status=OperStatus.ACTIVE |
| ) |
| self.adapter_agent.add_port(device.id, uni_port) |
| self.adapter_agent.add_port(device.id, Port( |
| port_no=1, |
| label='PON port', |
| type=Port.PON_ONU, |
| admin_state=AdminState.ENABLED, |
| oper_status=OperStatus.ACTIVE, |
| peers=[ |
| Port.PeerPort( |
| device_id=device.parent_id, |
| port_no=device.parent_port_no |
| ) |
| ] |
| )) |
| |
| # TODO adding vports to the logical device shall be done by agent? |
| # then we create the logical device port that corresponds to the UNI |
| # port of the device |
| |
| # obtain logical device id |
| parent_device = self.adapter_agent.get_device(device.parent_id) |
| logical_device_id = parent_device.parent_id |
| assert logical_device_id |
| |
| # we are going to use the proxy_address.channel_id as unique number |
| # and name for the virtual ports, as this is guaranteed to be unique |
| # in the context of the OLT port, so it is also unique in the context |
| # of the logical device |
| port_no = device.proxy_address.channel_id |
| cap = OFPPF_10GB_FD | OFPPF_FIBER |
| self.adapter_agent.add_logical_port(logical_device_id, LogicalPort( |
| id=str(port_no), |
| ofp_port=ofp_port( |
| port_no=port_no, |
| hw_addr=mac_str_to_tuple(device.mac_address), |
| name='uni-{}'.format(port_no), |
| config=0, |
| state=OFPPS_LIVE, |
| curr=cap, |
| advertised=cap, |
| peer=cap, |
| curr_speed=OFPPF_10GB_FD, |
| max_speed=OFPPF_10GB_FD |
| ), |
| device_id=device.id, |
| device_port_no=uni_port.port_no |
| )) |
| |
| # simulate a proxied message sending and receving a reply |
| reply = yield self._message_exchange(device) |
| |
| # and finally update to "ACTIVE" |
| device = self.adapter_agent.get_device(device.id) |
| device.oper_status = OperStatus.ACTIVE |
| self.adapter_agent.update_device(device) |
| |
| def abandon_device(self, device): |
| raise NotImplementedError(0 |
| ) |
| def disable_device(self, device): |
| raise NotImplementedError() |
| |
| def reenable_device(self, device): |
| raise NotImplementedError() |
| |
| def reboot_device(self, device): |
| raise NotImplementedError() |
| |
| def delete_device(self, device): |
| raise NotImplementedError() |
| |
| def get_device_details(self, device): |
| raise NotImplementedError() |
| |
| def update_flows_bulk(self, device, flows, groups): |
| log.info('########################################') |
| log.info('bulk-flow-update', device_id=device.id, |
| flows=flows, groups=groups) |
| assert len(groups.items) == 0, "Cannot yet deal with groups" |
| |
| Clause = {v: k for k, v in ClauseSubtypeEnum.iteritems()} |
| Operator = {v: k for k, v in RuleOperatorEnum.iteritems()} |
| |
| for flow in flows.items: |
| in_port = get_in_port(flow) |
| assert in_port is not None |
| |
| precedence = 255 - min(flow.priority / 256, 255) |
| |
| if in_port == 2: |
| log.info('#### Downstream Rule ####') |
| dn_req = EOAMPayload(body=CablelabsOUI() / |
| DPoEOpcode_SetRequest()) |
| |
| for field in get_ofb_fields(flow): |
| |
| if field.type == ETH_TYPE: |
| _type = field.eth_type |
| log.info('#### field.type == ETH_TYPE ####',field_type=_type) |
| |
| elif field.type == IP_PROTO: |
| _proto = field.ip_proto |
| log.info('#### field.type == IP_PROTO ####') |
| pass # construct ip_proto based condition here |
| |
| elif field.type == IN_PORT: |
| _port = field.port |
| log.info('#### field.type == IN_PORT ####', port=_port) |
| pass # construct in_port based condition here |
| |
| elif field.type == VLAN_VID: |
| _vlan_vid = field.vlan_vid & 0xfff |
| log.info('#### field.type == VLAN_VID ####', vlan=_vlan_vid) |
| |
| elif field.type == VLAN_PCP: |
| _vlan_pcp = field.vlan_pcp |
| log.info('#### field.type == VLAN_PCP ####', pcp=_vlan_pcp) |
| pass # construct VLAN PCP based filter condition here |
| |
| elif field.type == UDP_DST: |
| _udp_dst = field.udp_dst |
| log.info('#### field.type == UDP_DST ####') |
| pass # construct UDP SDT based filter here |
| |
| elif field.type == IPV4_DST: |
| _ipv4_dst = field.ipv4_dst |
| log.info('#### field.type == IPV4_DST ####') |
| pass |
| |
| else: |
| log.info('#### field.type == NOT IMPLEMENTED!! ####') |
| raise NotImplementedError('field.type={}'.format( |
| field.type)) |
| |
| for action in get_actions(flow): |
| |
| if action.type == OUTPUT: |
| log.info('#### action.type == OUTPUT ####') |
| |
| elif action.type == POP_VLAN: |
| log.info('#### action.type == POP_VLAN ####') |
| pass # construct vlan pop command here |
| |
| elif action.type == PUSH_VLAN: |
| log.info('#### action.type == PUSH_VLAN ####') |
| if action.push.ethertype != 0x8100: |
| log.error('unhandled-tpid', |
| ethertype=action.push.ethertype) |
| |
| elif action.type == SET_FIELD: |
| log.info('#### action.type == SET_FIELD ####') |
| assert (action.set_field.field.oxm_class == |
| ofp.OFPXMC_OPENFLOW_BASIC) |
| field = action.set_field.field.ofb_field |
| if field.type == VLAN_VID: |
| pass |
| else: |
| log.error('unsupported-action-set-field-type', |
| field_type=field.type) |
| else: |
| log.error('UNSUPPORTED-ACTION-TYPE', |
| action_type=action.type) |
| |
| # send message |
| log.info('ONU-send-proxied-message') |
| # self.adapter_agent.send_proxied_message(device.proxy_address, dn_req) |
| |
| |
| elif in_port == 1: |
| # Upstream rule |
| log.info('#### Upstream Rule ####') |
| |
| #### Loop through fields again... |
| |
| for field in get_ofb_fields(flow): |
| |
| if field.type == ETH_TYPE: |
| _type = field.eth_type |
| log.info('#### field.type == ETH_TYPE ####', in_port=in_port, |
| match=_type) |
| |
| elif field.type == IP_PROTO: |
| _proto = field.ip_proto |
| log.info('#### field.type == IP_PROTO ####', in_port=in_port, |
| ip_proto=ip_proto) |
| |
| elif field.type == IN_PORT: |
| _port = field.port |
| log.info('#### field.type == IN_PORT ####') |
| pass # construct in_port based condition here |
| |
| elif field.type == VLAN_VID: |
| _vlan_vid = field.vlan_vid & 0xfff |
| log.info('#### field.type == VLAN_VID ####') |
| |
| elif field.type == VLAN_PCP: |
| _vlan_pcp = field.vlan_pcp |
| log.info('#### field.type == VLAN_PCP ####') |
| pass # construct VLAN PCP based filter condition here |
| |
| elif field.type == UDP_DST: |
| _udp_dst = field.udp_dst |
| log.info('#### field.type == UDP_DST ####') |
| |
| else: |
| raise NotImplementedError('field.type={}'.format( |
| field.type)) |
| |
| for action in get_actions(flow): |
| |
| if action.type == OUTPUT: |
| log.info('#### action.type == OUTPUT ####') |
| |
| elif action.type == POP_VLAN: |
| log.info('#### action.type == POP_VLAN ####') |
| pass # construct vlan pop command here |
| |
| elif action.type == PUSH_VLAN: |
| log.info('#### action.type == PUSH_VLAN ####') |
| if action.push.ethertype != 0x8100: |
| log.error('unhandled-ether-type', |
| ethertype=action.push.ethertype) |
| |
| elif action.type == SET_FIELD: |
| log.info('#### action.type == SET_FIELD ####') |
| assert (action.set_field.field.oxm_class == |
| ofp.OFPXMC_OPENFLOW_BASIC) |
| field = action.set_field.field.ofb_field |
| if field.type == VLAN_VID: |
| pass |
| else: |
| log.error('unsupported-action-set-field-type', |
| field_type=field.type) |
| |
| else: |
| log.error('UNSUPPORTED-ACTION-TYPE', |
| action_type=action.type) |
| |
| else: |
| raise Exception('Port should be 1 or 2 by our convention') |
| |
| def update_flows_incrementally(self, device, flow_changes, group_changes): |
| raise NotImplementedError() |
| |
| def send_proxied_message(self, proxy_address, msg): |
| raise NotImplementedError() |
| |
| def receive_proxied_message(self, proxy_address, msg): |
| log.debug('receive-proxied-message', |
| proxy_address=proxy_address, msg=msg) |
| self.incoming_messages.put(msg) |
| |
| @inlineCallbacks |
| def _message_exchange(self, device): |
| |
| # register for receiving async messages |
| self.adapter_agent.register_for_proxied_messages(device.proxy_address) |
| |
| # reset incoming message queue |
| while self.incoming_messages.pending: |
| _ = yield self.incoming_messages.get() |
| |
| # construct message |
| msg = EOAMPayload(body=CablelabsOUI() / |
| DPoEOpcode_GetRequest() / |
| DeviceId() |
| ) |
| |
| # send message |
| log.info('ONU-send-proxied-message') |
| self.adapter_agent.send_proxied_message(device.proxy_address, msg) |
| |
| # wait till we detect incoming message |
| yield self.incoming_messages.get() |
| |
| # construct install of igmp query address |
| msg = EOAMPayload(body=CablelabsOUI() / |
| DPoEOpcode_SetRequest() / |
| AddStaticMacAddress(mac='01:00:5e:00:00:01') |
| ) |
| |
| # send message |
| log.info('ONU-send-proxied-message') |
| self.adapter_agent.send_proxied_message(device.proxy_address, msg) |
| |
| # wait till we detect incoming message |
| yield self.incoming_messages.get() |
| |
| # construct install of igmp query address |
| msg = EOAMPayload(body=CablelabsOUI() / |
| DPoEOpcode_GetRequest() / |
| FirmwareInfo() |
| ) |
| |
| # send message |
| log.info('ONU-send-proxied-message') |
| self.adapter_agent.send_proxied_message(device.proxy_address, msg) |
| |
| # wait till we detect incoming message |
| yield self.incoming_messages.get() |
| |
| # by returning we allow the device to be shown as active, which |
| # indirectly verified that message passing works |
| |
| def receive_packet_out(self, logical_device_id, egress_port_no, msg): |
| log.info('packet-out', logical_device_id=logical_device_id, |
| egress_port_no=egress_port_no, msg_len=len(msg)) |
| |
| def receive_inter_adapter_message(self, msg): |
| raise NotImplementedError() |