| # |
| # Copyright 2017 the original author or authors. |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # |
| |
| """ |
| A device agent is instantiated for each Device and plays an important role |
| between the Device object and its adapter. |
| """ |
| import structlog |
| from twisted.internet import reactor |
| from twisted.internet.defer import inlineCallbacks, returnValue |
| |
| from voltha.core.config.config_proxy import CallbackType |
| from voltha.protos.common_pb2 import AdminState, OperStatus |
| from voltha.registry import registry |
| from voltha.protos.openflow_13_pb2 import Flows, FlowGroups |
| |
| class InvalidStateTransition(Exception): pass |
| |
| |
| class DeviceAgent(object): |
| |
| def __init__(self, core, initial_data): |
| |
| self.core = core |
| self._tmp_initial_data = initial_data |
| self.last_data = None |
| self.calback_data = None |
| |
| self.proxy = core.get_proxy('/devices/{}'.format(initial_data.id)) |
| self.flows_proxy = core.get_proxy( |
| '/devices/{}/flows'.format(initial_data.id)) |
| self.groups_proxy = core.get_proxy( |
| '/devices/{}/flow_groups'.format(initial_data.id)) |
| |
| self.pm_config_proxy = core.get_proxy( |
| '/devices/{}/pm_configs'.format(initial_data.id)) |
| |
| self.proxy.register_callback( |
| CallbackType.PRE_UPDATE, self._validate_update) |
| self.proxy.register_callback( |
| CallbackType.POST_UPDATE, self._process_update) |
| |
| self.flows_proxy.register_callback( |
| CallbackType.POST_UPDATE, self._flow_table_updated) |
| self.groups_proxy.register_callback( |
| CallbackType.POST_UPDATE, self._group_table_updated) |
| |
| self.pm_config_proxy.register_callback( |
| CallbackType.POST_UPDATE, self._pm_config_updated) |
| |
| # to know device capabilities |
| self.device_type = core.get_proxy( |
| '/device_types/{}'.format(initial_data.type)).get() |
| |
| self.adapter_agent = None |
| self.log = structlog.get_logger(device_id=initial_data.id) |
| |
| @inlineCallbacks |
| def start(self): |
| self.log.debug('starting') |
| self._set_adapter_agent() |
| yield self._process_update(self._tmp_initial_data) |
| del self._tmp_initial_data |
| self.log.info('started') |
| returnValue(self) |
| |
| @inlineCallbacks |
| def stop(self, device): |
| self.log.debug('stopping', device=device) |
| |
| # First, propagate this request to the device agents |
| yield self._delete_device(device) |
| |
| self.proxy.unregister_callback( |
| CallbackType.PRE_UPDATE, self._validate_update) |
| self.proxy.unregister_callback( |
| CallbackType.POST_UPDATE, self._process_update) |
| self.log.info('stopped') |
| |
| @inlineCallbacks |
| def reboot_device(self, device, dry_run=False): |
| self.log.info('reboot-device', device=device, dry_run=dry_run) |
| if not dry_run: |
| yield self.adapter_agent.reboot_device(device) |
| |
| @inlineCallbacks |
| def get_device_details(self, device, dry_run=False): |
| self.log.info('get-device-details', device=device, dry_run=dry_run) |
| if not dry_run: |
| yield self.adapter_agent.get_device_details(device) |
| |
| def _set_adapter_agent(self): |
| adapter_name = self._tmp_initial_data.adapter |
| if adapter_name == '': |
| proxy = self.core.get_proxy('/') |
| known_device_types = dict( |
| (dt.id, dt) for dt in proxy.get('/device_types')) |
| device_type = known_device_types[self._tmp_initial_data.type] |
| adapter_name = device_type.adapter |
| assert adapter_name != '' |
| self.adapter_agent = registry('adapter_loader').get_agent(adapter_name) |
| |
| @inlineCallbacks |
| def _validate_update(self, device): |
| """ |
| Called before each update, it allows the blocking of the update |
| (by raising an exception), or even the augmentation of the incoming |
| data. |
| """ |
| self.log.debug('device-pre-update', device=device) |
| yield self._process_state_transitions(device, dry_run=True) |
| returnValue(device) |
| |
| @inlineCallbacks |
| def _process_update(self, device): |
| """ |
| Called after the device object was updated (individually or part of |
| a transaction), and it is used to propagate the change down to the |
| adapter |
| """ |
| self.log.debug('device-post-update', device=device) |
| |
| # first, process any potential state transition |
| yield self._process_state_transitions(device) |
| |
| # finally, store this data as last data so we can see what changed |
| self.last_data = device |
| |
| @inlineCallbacks |
| def _process_state_transitions(self, device, dry_run=False): |
| |
| old_admin_state = getattr(self.last_data, 'admin_state', |
| AdminState.UNKNOWN) |
| new_admin_state = device.admin_state |
| transition_handler = self.admin_state_fsm.get( |
| (old_admin_state, new_admin_state), None) |
| if transition_handler is None: |
| pass # no-op |
| elif transition_handler is False: |
| raise InvalidStateTransition('{} -> {}'.format( |
| old_admin_state, new_admin_state)) |
| else: |
| assert callable(transition_handler) |
| yield transition_handler(self, device, dry_run) |
| |
| @inlineCallbacks |
| def _activate_device(self, device, dry_run=False): |
| self.log.info('activate-device', device=device, dry_run=dry_run) |
| if not dry_run: |
| device.oper_status = OperStatus.ACTIVATING |
| self.update_device(device) |
| yield self.adapter_agent.adopt_device(device) |
| |
| def update_device(self, device): |
| self.last_data = device # so that we don't propagate back |
| self.proxy.update('/', device) |
| |
| def update_device_pm_config(self, device_pm_config, init=False): |
| self.callback_data = init# so that we don't push init data |
| self.pm_config_proxy.update('/', device_pm_config) |
| |
| def _propagate_change(self, device, dry_run=False): |
| self.log.info('propagate-change', device=device, dry_run=dry_run) |
| if device != self.last_data: |
| raise NotImplementedError() |
| else: |
| self.log.debug('no-op') |
| |
| def _abandon_device(self, device, dry_run=False): |
| self.log.info('abandon-device', device=device, dry_run=dry_run) |
| raise NotImplementedError() |
| |
| def _delete_all_flows(self): |
| """ Delete all flows on the device """ |
| try: |
| self.flows_proxy.update('/', Flows(items=[])) |
| self.groups_proxy.update('/', FlowGroups(items=[])) |
| except Exception, e: |
| self.exception('flow-delete-exception', e=e) |
| |
| @inlineCallbacks |
| def _disable_device(self, device, dry_run=False): |
| self.log.info('disable-device', device=device, dry_run=dry_run) |
| if not dry_run: |
| # Remove all flows before disabling device |
| self._delete_all_flows() |
| yield self.adapter_agent.disable_device(device) |
| |
| @inlineCallbacks |
| def _reenable_device(self, device, dry_run=False): |
| self.log.info('reenable-device', device=device, dry_run=dry_run) |
| if not dry_run: |
| yield self.adapter_agent.reenable_device(device) |
| |
| @inlineCallbacks |
| def _delete_device(self, device, dry_run=False): |
| self.log.info('delete-device', device=device, dry_run=dry_run) |
| if not dry_run: |
| yield self.adapter_agent.delete_device(device) |
| |
| admin_state_fsm = { |
| |
| # Missing entries yield no-op |
| # False means invalid state change |
| |
| (AdminState.UNKNOWN, AdminState.ENABLED): _activate_device, |
| |
| (AdminState.PREPROVISIONED, AdminState.UNKNOWN): False, |
| (AdminState.PREPROVISIONED, AdminState.ENABLED): _activate_device, |
| |
| (AdminState.ENABLED, AdminState.UNKNOWN): False, |
| (AdminState.ENABLED, AdminState.ENABLED): _propagate_change, |
| (AdminState.ENABLED, AdminState.DISABLED): _disable_device, |
| (AdminState.ENABLED, AdminState.PREPROVISIONED): _abandon_device, |
| |
| (AdminState.DISABLED, AdminState.UNKNOWN): False, |
| (AdminState.DISABLED, AdminState.PREPROVISIONED): _abandon_device, |
| (AdminState.DISABLED, AdminState.ENABLED): _reenable_device |
| |
| } |
| |
| ## <======================= PM CONFIG UPDATE HANDLING ==================== |
| |
| #@inlineCallbacks |
| def _pm_config_updated(self, pm_configs): |
| self.log.debug('pm-config-updated', pm_configs=pm_configs, |
| callback_data=self.callback_data) |
| device_id = self.proxy.get('/').id |
| if not self.callback_data: |
| self.adapter_agent.update_adapter_pm_config(device_id, pm_configs) |
| self.callback_data = None |
| |
| ## <======================= FLOW TABLE UPDATE HANDLING ==================== |
| |
| @inlineCallbacks |
| def _flow_table_updated(self, flows): |
| self.log.debug('flow-table-updated', |
| logical_device_id=self.last_data.id, flows=flows) |
| |
| # if device accepts bulk flow update, lets just call that |
| if self.device_type.accepts_bulk_flow_update: |
| groups = self.groups_proxy.get('/') # gather flow groups |
| yield self.adapter_agent.update_flows_bulk( |
| device=self.last_data, |
| flows=flows, |
| groups=groups) |
| # add ability to notify called when an flow update completes |
| # see https://jira.opencord.org/browse/CORD-839 |
| |
| elif self.device_type.accepts_add_remove_flow_updates: |
| raise NotImplementedError() |
| |
| else: |
| raise NotImplementedError() |
| |
| ## <======================= GROUP TABLE UPDATE HANDLING =================== |
| |
| @inlineCallbacks |
| def _group_table_updated(self, groups): |
| self.log.debug('group-table-updated', |
| logical_device_id=self.last_data.id, |
| flow_groups=groups) |
| |
| # if device accepts bulk flow update, lets just call that |
| if self.device_type.accepts_bulk_flow_update: |
| flows = self.flows_proxy.get('/') # gather flows |
| yield self.adapter_agent.update_flows_bulk( |
| device=self.last_data, |
| flows=flows, |
| groups=groups) |
| # add ability to notify called when an group update completes |
| # see https://jira.opencord.org/browse/CORD-839 |
| |
| elif self.device_type.accepts_add_remove_flow_updates: |
| raise NotImplementedError() |
| |
| else: |
| raise NotImplementedError() |
| |