| # Copyright 2017-present Open Networking Foundation |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| |
| ###################### Filebeat Configuration Example ######################### |
| |
| # This file is an example configuration file highlighting only the most common |
| # options. The filebeat.reference.yml file from the same directory contains all the |
| # supported options with more comments. You can use it as a reference. |
| # |
| # You can find the full configuration reference here: |
| # https://www.elastic.co/guide/en/beats/filebeat/index.html |
| |
| # For more available modules and options, please see the filebeat.reference.yml sample |
| # configuration file. |
| |
| #=========================== Filebeat prospectors ============================= |
| |
| filebeat.prospectors: |
| |
| # Each - is a prospector. Most options can be set at the prospector level, so |
| # you can use different prospectors for various configurations. |
| # Below are the prospector specific configurations. |
| |
| - type: log |
| |
| # Change to true to enable this prospector configuration. |
| enabled: true |
| |
| # Paths that should be crawled and fetched. Glob based paths. |
| paths: |
| - /var/log/xos*.log |
| |
| json.message_key: event |
| json.keys_under_root: true |
| |
| # Exclude lines. A list of regular expressions to match. It drops the lines that are |
| # matching any regular expression from the list. |
| #exclude_lines: ['^DBG'] |
| |
| # Include lines. A list of regular expressions to match. It exports the lines that are |
| # matching any regular expression from the list. |
| #include_lines: ['^ERR', '^WARN'] |
| |
| # Exclude files. A list of regular expressions to match. Filebeat drops the files that |
| # are matching any regular expression from the list. By default, no files are dropped. |
| #exclude_files: ['.gz$'] |
| |
| # Optional additional fields. These fields can be freely picked |
| # to add additional information to the crawled log files for filtering |
| #fields: |
| # level: debug |
| # review: 1 |
| |
| ### Multiline options |
| |
| # Mutiline can be used for log messages spanning multiple lines. This is common |
| # for Java Stack Traces or C-Line Continuation |
| |
| # The regexp Pattern that has to be matched. The example pattern matches all lines starting with [ |
| #multiline.pattern: ^\[ |
| |
| # Defines if the pattern set under pattern should be negated or not. Default is false. |
| #multiline.negate: false |
| |
| # Match can be set to "after" or "before". It is used to define if lines should be append to a pattern |
| # that was (not) matched before or after or as long as a pattern is not matched based on negate. |
| # Note: After is the equivalent to previous and before is the equivalent to to next in Logstash |
| #multiline.match: after |
| |
| |
| #============================= Filebeat modules =============================== |
| |
| filebeat.config.modules: |
| # Glob pattern for configuration loading |
| path: ${path.config}/modules.d/*.yml |
| |
| # Set to true to enable config reloading |
| reload.enabled: false |
| |
| # Period on which files under path should be checked for changes |
| #reload.period: 10s |
| |
| #==================== Elasticsearch template setting ========================== |
| |
| setup.template.settings: |
| index.number_of_shards: 3 |
| #index.codec: best_compression |
| #_source.enabled: false |
| |
| #================================ General ===================================== |
| |
| # The name of the shipper that publishes the network data. It can be used to group |
| # all the transactions sent by a single shipper in the web interface. |
| #name: |
| |
| # The tags of the shipper are included in their own field with each |
| # transaction published. |
| #tags: ["service-X", "web-tier"] |
| |
| # Optional fields that you can specify to add additional information to the |
| # output. |
| #fields: |
| # env: staging |
| |
| |
| #============================== Dashboards ===================================== |
| # These settings control loading the sample dashboards to the Kibana index. Loading |
| # the dashboards is disabled by default and can be enabled either by setting the |
| # options here, or by using the `-setup` CLI flag or the `setup` command. |
| #setup.dashboards.enabled: false |
| |
| # The URL from where to download the dashboards archive. By default this URL |
| # has a value which is computed based on the Beat name and version. For released |
| # versions, this URL points to the dashboard archive on the artifacts.elastic.co |
| # website. |
| #setup.dashboards.url: |
| |
| #============================== Kibana ===================================== |
| |
| # Starting with Beats version 6.0.0, the dashboards are loaded via the Kibana API. |
| # This requires a Kibana endpoint configuration. |
| setup.kibana: |
| |
| # Kibana Host |
| # Scheme and port can be left out and will be set to the default (http and 5601) |
| # In case you specify and additional path, the scheme is required: http://localhost:5601/path |
| # IPv6 addresses should always be defined as: https://[2001:db8::1]:5601 |
| #host: "localhost:5601" |
| |
| #============================= Elastic Cloud ================================== |
| |
| # These settings simplify using filebeat with the Elastic Cloud (https://cloud.elastic.co/). |
| |
| # The cloud.id setting overwrites the `output.elasticsearch.hosts` and |
| # `setup.kibana.host` options. |
| # You can find the `cloud.id` in the Elastic Cloud web UI. |
| #cloud.id: |
| |
| # The cloud.auth setting overwrites the `output.elasticsearch.username` and |
| # `output.elasticsearch.password` settings. The format is `<user>:<pass>`. |
| #cloud.auth: |
| |
| #================================ Outputs ===================================== |
| |
| # Configure what output to use when sending the data collected by the beat. |
| |
| #-------------------------- Elasticsearch output ------------------------------ |
| output.elasticsearch: |
| # Array of hosts to connect to. |
| hosts: ["elk:9200"] |
| template.name: filebeat |
| template.path: filebeat.template.json |
| |
| # Optional protocol and basic auth credentials. |
| #protocol: "https" |
| #username: "elastic" |
| #password: "changeme" |
| |
| #----------------------------- Logstash output -------------------------------- |
| #output.logstash: |
| # The Logstash hosts |
| #hosts: ["localhost:5044"] |
| |
| # Optional SSL. By default is off. |
| # List of root certificates for HTTPS server verifications |
| #ssl.certificate_authorities: ["/etc/pki/root/ca.pem"] |
| |
| # Certificate for SSL client authentication |
| #ssl.certificate: "/etc/pki/client/cert.pem" |
| |
| # Client Certificate Key |
| #ssl.key: "/etc/pki/client/cert.key" |
| |
| #================================ Logging ===================================== |
| |
| # Sets log level. The default log level is info. |
| # Available log levels are: critical, error, warning, info, debug |
| # logging.level: debug |
| |
| # At debug level, you can selectively enable logging only for some components. |
| # To enable all selectors use ["*"]. Examples of other selectors are "beat", |
| # "publish", "service". |
| # logging.selectors: ["*"] |