Matteo Scandolo | a6a3aee | 2019-11-26 13:30:14 -0700 | [diff] [blame] | 1 | /* |
| 2 | * Copyright (c) 2018 - present. Boling Consulting Solutions (bcsw.net) |
| 3 | * |
| 4 | * Licensed under the Apache License, Version 2.0 (the "License"); |
| 5 | * you may not use this file except in compliance with the License. |
| 6 | * You may obtain a copy of the License at |
| 7 | * http://www.apache.org/licenses/LICENSE-2.0 |
| 8 | * Unless required by applicable law or agreed to in writing, software |
| 9 | * distributed under the License is distributed on an "AS IS" BASIS, |
| 10 | * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| 11 | * See the License for the specific language governing permissions and |
| 12 | * limitations under the License. |
| 13 | */ |
| 14 | /* |
| 15 | * NOTE: This file was generated, manual edits will be overwritten! |
| 16 | * |
| 17 | * Generated by 'goCodeGenerator.py': |
| 18 | * https://github.com/cboling/OMCI-parser/README.md |
| 19 | */ |
| 20 | package generated |
| 21 | |
| 22 | import "github.com/deckarep/golang-set" |
| 23 | |
| 24 | const XdslXtuCPerformanceMonitoringHistoryDataClassId ClassID = ClassID(112) |
| 25 | |
| 26 | var xdslxtucperformancemonitoringhistorydataBME *ManagedEntityDefinition |
| 27 | |
| 28 | // XdslXtuCPerformanceMonitoringHistoryData (class ID #112) |
| 29 | // This ME collects PM data on the xTUC to xTUR path as seen from the xTU-C. Instances of this ME |
| 30 | // are created and deleted by the OLT. |
| 31 | // |
| 32 | // For a complete discussion of generic PM architecture, refer to clause I.4. |
| 33 | // |
| 34 | // Relationships |
| 35 | // An instance of this ME is associated with an xDSL UNI. |
| 36 | // |
| 37 | // Attributes |
| 38 | // Managed Entity Id |
| 39 | // Managed entity ID: This attribute uniquely identifies each instance of this ME. Through an |
| 40 | // identical ID, this ME is implicitly linked to an instance of the PPTP xDSL UNI part 1. (R, |
| 41 | // setbycreate) (mandatory) (2 bytes) |
| 42 | // |
| 43 | // Interval End Time |
| 44 | // Interval end time: This attribute identifies the most recently finished 15 min interval. (R) |
| 45 | // (mandatory) (1 byte) |
| 46 | // |
| 47 | // Threshold Data 1_2 Id |
| 48 | // Threshold data 1/2 ID: This attribute points to an instance of the threshold data 1 and 2 MEs |
| 49 | // that contain PM threshold values. (R, W, setbycreate) (mandatory) (2 bytes) |
| 50 | // |
| 51 | // Loss Of Frame Seconds |
| 52 | // Loss of frame seconds: (R) (mandatory) (2 bytes) |
| 53 | // |
| 54 | // Loss Of Signal Seconds |
| 55 | // Loss of signal seconds: (R) (mandatory) (2 bytes) |
| 56 | // |
| 57 | // Loss Of Link Seconds |
| 58 | // Loss of link seconds: (R) (mandatory) (2 bytes) |
| 59 | // |
| 60 | // Loss Of Power Seconds |
| 61 | // Loss of power seconds: (R) (mandatory) (2 bytes) |
| 62 | // |
| 63 | // Errored Seconds Es |
| 64 | // Errored seconds (ES): This attribute counts 1 s intervals with one or more CRC8 anomalies summed |
| 65 | // over all received bearer channels, or one or more loss of signal (LOS) defects, or one or more |
| 66 | // SEF defects, or one or more LPR defects. (R) (mandatory) (2 bytes) |
| 67 | // |
| 68 | // Severely Errored Seconds |
| 69 | // (R) (mandatory) (2 bytes) |
| 70 | // |
| 71 | // Line Initializations |
| 72 | // Line initializations: This attribute counts the total number of full initializations attempted |
| 73 | // on the line, both successful and failed. (R) (mandatory) (2 bytes) |
| 74 | // |
| 75 | // Failed Line Initializations |
| 76 | // Failed line initializations: This attribute counts the total number of failed full |
| 77 | // initializations during the accumulation period. A failed full initialization occurs when |
| 78 | // showtime is not reached at the end of the full initialization procedure. (R) (mandatory) |
| 79 | // (2 bytes) |
| 80 | // |
| 81 | // Short Initializations |
| 82 | // Short initializations: This attribute counts the total number of fast retrains or short |
| 83 | // initializations attempted on the line, successful and failed. Fast retrain is defined in [ITUT |
| 84 | // G.992.2]. Short initialization is defined in [ITUT G.992.3] and [ITUT G.992.4]. (R) (optional) |
| 85 | // (2 bytes) |
| 86 | // |
| 87 | // Failed Short Initializations |
| 88 | // (R) (optional) (2 bytes) |
| 89 | // |
| 90 | // Fec Seconds |
| 91 | // FEC seconds: This attribute counts seconds during which there was an FEC anomaly. (R) |
| 92 | // (mandatory) (2 bytes) |
| 93 | // |
| 94 | // Unavailable Seconds |
| 95 | // Unavailable seconds: This attribute counts 1 s intervals during which the xDSL UNI is |
| 96 | // unavailable. The line becomes unavailable at the onset of 10 contiguous SES-Ls. The 10 SES-Ls |
| 97 | // are included in unavailable time. Once unavailable, the line becomes available at the onset of |
| 98 | // 10 contiguous seconds that are not severely errored. The 10 s with no SESLs are excluded from |
| 99 | // unavailable time. Some attribute counts are inhibited during unavailability – see clause |
| 100 | // 7.2.7.13 of [ITUT G.997.1]. (R) (mandatory) (2 bytes) |
| 101 | // |
| 102 | // Sos Success Count, Near End |
| 103 | // SOS success count, near end: The SOS-SUCCESS-NE attribute is a count of the total number of |
| 104 | // successful SOS procedures initiated by the near-end xTU on the line during the accumulation |
| 105 | // period. Successful SOS is defined in clause 12.1.4 of [ITUT G.993.2]. (R) (optional) (2 bytes) |
| 106 | // |
| 107 | // Sos Success Count, Far End |
| 108 | // SOS success count, far end: The SOS-SUCCESS-FE attribute is a count of the total number of |
| 109 | // successful SOS procedures initiated by the far-end xTU on the line during the accumulation |
| 110 | // period. Successful SOS is defined in clause 12.1.4 of [ITUT G.993.2]. (R) (optional) (2 bytes) |
| 111 | // |
| 112 | type XdslXtuCPerformanceMonitoringHistoryData struct { |
| 113 | ManagedEntityDefinition |
| 114 | Attributes AttributeValueMap |
| 115 | } |
| 116 | |
| 117 | func init() { |
| 118 | xdslxtucperformancemonitoringhistorydataBME = &ManagedEntityDefinition{ |
| 119 | Name: "XdslXtuCPerformanceMonitoringHistoryData", |
| 120 | ClassID: 112, |
| 121 | MessageTypes: mapset.NewSetWith( |
| 122 | Create, |
| 123 | Delete, |
| 124 | Get, |
| 125 | Set, |
| 126 | ), |
| 127 | AllowedAttributeMask: 0XFFFF, |
| 128 | AttributeDefinitions: AttributeDefinitionMap{ |
| 129 | 0: Uint16Field("ManagedEntityId", 0, mapset.NewSetWith(Read, SetByCreate), false, false, false, false, 0), |
| 130 | 1: ByteField("IntervalEndTime", 0, mapset.NewSetWith(Read), false, false, false, false, 1), |
| 131 | 2: Uint16Field("ThresholdData12Id", 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, false, 2), |
| 132 | 3: Uint16Field("LossOfFrameSeconds", 0, mapset.NewSetWith(Read), false, false, false, false, 3), |
| 133 | 4: Uint16Field("LossOfSignalSeconds", 0, mapset.NewSetWith(Read), false, false, false, false, 4), |
| 134 | 5: Uint16Field("LossOfLinkSeconds", 0, mapset.NewSetWith(Read), false, false, false, false, 5), |
| 135 | 6: Uint16Field("LossOfPowerSeconds", 0, mapset.NewSetWith(Read), false, false, false, false, 6), |
| 136 | 7: Uint16Field("ErroredSecondsEs", 0, mapset.NewSetWith(Read), false, false, false, false, 7), |
| 137 | 8: Uint16Field("SeverelyErroredSeconds", 0, mapset.NewSetWith(Read), false, false, false, false, 8), |
| 138 | 9: Uint16Field("LineInitializations", 0, mapset.NewSetWith(Read), false, false, false, false, 9), |
| 139 | 10: Uint16Field("FailedLineInitializations", 0, mapset.NewSetWith(Read), false, false, false, false, 10), |
| 140 | 11: Uint16Field("ShortInitializations", 0, mapset.NewSetWith(Read), false, false, true, false, 11), |
| 141 | 12: Uint16Field("FailedShortInitializations", 0, mapset.NewSetWith(Read), false, false, true, false, 12), |
| 142 | 13: Uint16Field("FecSeconds", 0, mapset.NewSetWith(Read), false, false, false, false, 13), |
| 143 | 14: Uint16Field("UnavailableSeconds", 0, mapset.NewSetWith(Read), false, false, false, false, 14), |
| 144 | 15: Uint16Field("SosSuccessCount,NearEnd", 0, mapset.NewSetWith(Read), false, false, true, false, 15), |
| 145 | 16: Uint16Field("SosSuccessCount,FarEnd", 0, mapset.NewSetWith(Read), false, false, true, false, 16), |
| 146 | }, |
| 147 | } |
| 148 | } |
| 149 | |
| 150 | // NewXdslXtuCPerformanceMonitoringHistoryData (class ID 112 creates the basic |
| 151 | // Managed Entity definition that is used to validate an ME of this type that |
| 152 | // is received from the wire, about to be sent on the wire. |
| 153 | func NewXdslXtuCPerformanceMonitoringHistoryData(params ...ParamData) (*ManagedEntity, OmciErrors) { |
| 154 | return NewManagedEntity(xdslxtucperformancemonitoringhistorydataBME, params...) |
| 155 | } |