Andrea Campanella | 10426e2 | 2021-10-15 17:58:04 +0200 | [diff] [blame] | 1 | /* |
| 2 | * Copyright (c) 2018 - present. Boling Consulting Solutions (bcsw.net) |
| 3 | * Copyright 2020-present Open Networking Foundation |
| 4 | |
| 5 | * Licensed under the Apache License, Version 2.0 (the "License"); |
| 6 | * you may not use this file except in compliance with the License. |
| 7 | * You may obtain a copy of the License at |
| 8 | |
| 9 | * http://www.apache.org/licenses/LICENSE-2.0 |
| 10 | |
| 11 | * Unless required by applicable law or agreed to in writing, software |
| 12 | * distributed under the License is distributed on an "AS IS" BASIS, |
| 13 | * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| 14 | * See the License for the specific language governing permissions and |
| 15 | * limitations under the License. |
| 16 | */ |
| 17 | /* |
| 18 | * NOTE: This file was generated, manual edits will be overwritten! |
| 19 | * |
| 20 | * Generated by 'goCodeGenerator.py': |
| 21 | * https://github.com/cboling/OMCI-parser/README.md |
| 22 | */ |
| 23 | |
| 24 | package generated |
| 25 | |
| 26 | import "github.com/deckarep/golang-set" |
| 27 | |
| 28 | // PwAtmConfigurationDataClassID is the 16-bit ID for the OMCI |
| 29 | // Managed entity PW ATM configuration data |
| 30 | const PwAtmConfigurationDataClassID = ClassID(337) // 0x0151 |
| 31 | |
| 32 | var pwatmconfigurationdataBME *ManagedEntityDefinition |
| 33 | |
| 34 | // PwAtmConfigurationData (Class ID: #337 / 0x0151) |
| 35 | // This ME contains generic configuration data for an ATM pseudowire. Definitions of attributes are |
| 36 | // from PW-ATM-MIB [IETF RFC 5605]. Instances of this ME are created and deleted by the OLT. |
| 37 | // |
| 38 | // Relationships |
| 39 | // An instance of this ME is associated with an instance of the MPLS pseudowire TP ME with a |
| 40 | // pseudowire type attribute equal to one of the following.//// 2 ATM AAL5 SDU VCC transport//// 3 ATM transparent cell transport//// 9 ATM n-to-one VCC cell transport//// 10 ATM n-to-one VPC cell transport//// 12 ATM one-to-one VCC cell mode//// 13 ATM one-to-one VPC cell mode//// 14 ATM AAL5 PDU VCC transport//// Alternatively, an instance of this ME may be associated with an Ethernet flow TP or a TCP/UDP |
| 41 | // config data ME, depending on the transport layer of the pseudowire. |
| 42 | // |
| 43 | // Attributes |
| 44 | // Managed Entity Id |
| 45 | // This attribute uniquely identifies each instance of this ME. (R, setbycreate)-(mandatory) (2 |
| 46 | // bytes) |
| 47 | // |
| 48 | // Tp Type |
| 49 | // This attribute specifies the type of the underlying transport layer. (R, W, setbycreate) |
| 50 | // (mandatory) (1 byte) |
| 51 | // |
| 52 | // 0 MPLS pseudowire termination point |
| 53 | // |
| 54 | // 1 Ethernet flow termination point |
| 55 | // |
| 56 | // 2 TCP/UDP config data |
| 57 | // |
| 58 | // Transport Tp Pointer |
| 59 | // This attribute points to an associated instance of the transport layer TP, whose type is |
| 60 | // specified by the TP type attribute. (R, W, setbycreate) (mandatory) (2 bytes) |
| 61 | // |
| 62 | // Pptp Atm Uni Pointer |
| 63 | // This attribute points to an associated instance of the ITU-T G.983.2 PPTP ATM UNI. Refer to |
| 64 | // [ITUT G.983.2] for the definition of the target ME. (R, W, setbycreate) (mandatory) (2 bytes) |
| 65 | // |
| 66 | // Max C Ell C Oncatenation |
| 67 | // Max cell concatenation: This attribute specifies the maximum number of ATM cells that can be |
| 68 | // concatenated into one PW packet in the upstream direction. (R, W, setbycreate) (mandatory) (2 |
| 69 | // bytes) |
| 70 | // |
| 71 | // Far End M Ax C Ell C Oncatenation |
| 72 | // Far-end max cell concatenation: This attribute specifies the maximum number of ATM cells that |
| 73 | // can be concatenated into one PW packet as provisioned at the far end. This attribute may be used |
| 74 | // for error checking of downstream traffic. The value 0 specifies that the ONU uses its internal |
| 75 | // default. (R, W, set-by-create) (optional) (2 bytes) |
| 76 | // |
| 77 | // Atm Cell Loss Priority Clp Qos Mapping |
| 78 | // ATM cell loss priority (CLP) QoS mapping: This attribute specifies whether the CLP bits should |
| 79 | // be considered when setting the value in the QoS fields of the encapsulating protocol (e.g., TC |
| 80 | // fields of the MPLS label stack). |
| 81 | // |
| 82 | // 1 ATM CLP bits mapping to QoS fields of the encapsulating protocol |
| 83 | // |
| 84 | // 2 Not applicable |
| 85 | // |
| 86 | // The value 0 specifies that the ONU uses its internal default. (R, W, setbycreate) (optional) (1 |
| 87 | // byte) |
| 88 | // |
| 89 | // Timeout Mode |
| 90 | // The value 0 specifies that the ONU uses its internal default. (R, W, setbycreate) (optional) (1 |
| 91 | // byte) |
| 92 | // |
| 93 | // This attribute specifies whether a packet is transmitted in the upstream direction based on |
| 94 | // timeout expiration for collecting cells. The actual handling of the timeout is implementation |
| 95 | // specific; as such, this attribute may be changed at any time with proper consideration of the |
| 96 | // traffic disruption effect. |
| 97 | // |
| 98 | // 1 Disabled. The ONU does not generate packets based on timeout cells. |
| 99 | // |
| 100 | // 2 Enabled. The ONU generates packets based on timeout cells. |
| 101 | // |
| 102 | // Pw Atm Mapping Table |
| 103 | // 12 ATM one-to-one VCC cell mode |
| 104 | // |
| 105 | // 13 ATM one-to-one VPC cell mode |
| 106 | // |
| 107 | // 14 ATM AAL5 PDU VCC transport |
| 108 | // |
| 109 | // Each entry contains: |
| 110 | // |
| 111 | // Entry number: (1-byte), the index of this row. A set operation with all fields zero has the |
| 112 | // effect of clearing the table. A set operation with a non-zero entry number and all other fields |
| 113 | // zero, has the effect of deleting one row. |
| 114 | // |
| 115 | // Upstream VPI: (2 bytes) |
| 116 | // |
| 117 | // The VPI value of this ATM PW at the UNI. When pseudowire type-= ATM transparent cell transport |
| 118 | // (3), this field is ignored. |
| 119 | // |
| 120 | // Upstream VCI: (2 bytes) |
| 121 | // |
| 122 | // The VCI value of this ATM PW at the UNI. When pseudowire type-= ATM transparent cell transport |
| 123 | // (3), or in virtual path (VP) cases, this field is ignored. |
| 124 | // |
| 125 | // Upstream traffic descriptor profile pointer: (2 bytes) |
| 126 | // |
| 127 | // A pointer to an instance of an ITU-T G.983.2 traffic descriptor profile ME that contains the |
| 128 | // traffic parameters used for the ATM upstream traffic. Refer to clause 7.5.2 of [ITUT-G.983.2] |
| 129 | // for the definition of this class of MEs. A null pointer indicates BE. |
| 130 | // |
| 131 | // Upstream mapped VPI: (2 bytes) |
| 132 | // |
| 133 | // The VPI value of the upstream MPLS ATM PW. This field is valid when the pseudowire type is as |
| 134 | // follows. |
| 135 | // |
| 136 | // 9 ATM n-to-one VCC cell transport |
| 137 | // |
| 138 | // 10 ATM n-to-one VPC cell transport |
| 139 | // |
| 140 | // 12 ATM one-to-one VCC cell mode |
| 141 | // |
| 142 | // 13 ATM one-to-one VPC cell mode |
| 143 | // |
| 144 | // This field is not used for other pseudowire types. |
| 145 | // |
| 146 | // Upstream mapped VCI: (2 bytes) |
| 147 | // |
| 148 | // The VCI value of the upstream MPLS ATM PW. This field is valid when the pseudowire type is as |
| 149 | // follows. |
| 150 | // |
| 151 | // 9 ATM n-to-one VCC cell transport |
| 152 | // |
| 153 | // 10 ATM n-to-one VPC cell transport |
| 154 | // |
| 155 | // 12 ATM one-to-one VCC cell mode |
| 156 | // |
| 157 | // 13 ATM one-to-one VPC cell mode |
| 158 | // |
| 159 | // This field is not used for other pseudowire types. |
| 160 | // |
| 161 | // Downstream VPI: (2 bytes) |
| 162 | // |
| 163 | // The downstream VPI value of this MPLS ATM PW. When pseudowire type-= ATM transparent cell |
| 164 | // transport (3), this field is ignored. |
| 165 | // |
| 166 | // Downstream VCI: (2 bytes) |
| 167 | // |
| 168 | // The downstream VCI value of this MPLS ATM PW. When pseudowire type-= ATM transparent cell |
| 169 | // transport (3) or in the VP case, this field is ignored. |
| 170 | // |
| 171 | // Downstream traffic descriptor profile pointer: (2 bytes) |
| 172 | // |
| 173 | // A pointer to an instance of an ITU-T G.983.2 traffic descriptor profile ME that contains the |
| 174 | // traffic parameters used for the ATM downstream traffic. Refer to clause 7.5.2 of [ITUT-G.983.2] |
| 175 | // for definition of this class of MEs. A null pointer indicates BE. |
| 176 | // |
| 177 | // Downstream mapped VPI: (2 bytes) |
| 178 | // |
| 179 | // The VPI value of this ATM PW at the UNI. This field is valid when the pseudowire type is as |
| 180 | // follows. |
| 181 | // |
| 182 | // 9 ATM n-to-one VCC cell transport |
| 183 | // |
| 184 | // 10 ATM n-to-one VPC cell transport |
| 185 | // |
| 186 | // 12 ATM one-to-one VCC cell mode |
| 187 | // |
| 188 | // 13 ATM one-to-one VPC cell mode |
| 189 | // |
| 190 | // This field is not used for other pseudowire types. |
| 191 | // |
| 192 | // Downstream mapped VCI: (2 bytes) |
| 193 | // |
| 194 | // The VCI value of this ATM PW at the UNI. This field is valid when the pseudowire type is as |
| 195 | // follows. |
| 196 | // |
| 197 | // 9 ATM n-to-one VCC cell transport |
| 198 | // |
| 199 | // 10 ATM n-to-one VPC cell transport |
| 200 | // |
| 201 | // 12 ATM one-to-one VCC cell mode |
| 202 | // |
| 203 | // 13 ATM one-to-one VPC cell mode |
| 204 | // |
| 205 | // This field is not used for other pseudowire types. |
| 206 | // |
| 207 | // (R,-W) (mandatory) (21N bytes, where N is the number of entries in the list) |
| 208 | // |
| 209 | // This attribute lists ATM VPI/VCI mapping entries in both the upstream and downstream directions. |
| 210 | // In the upstream direction, ATM cells that match no entry's upstream VPI (and conditionally VCI) |
| 211 | // values are discarded; conversely in the downstream direction. Upon ME instantiation, the ONU |
| 212 | // sets this attribute to an empty table, which discards all cells in both directions. |
| 213 | // |
| 214 | // The table can contain up to N entries when the pseudowire type is equal to one of the following: |
| 215 | // |
| 216 | // 9 ATM n-to-one VCC cell transport |
| 217 | // |
| 218 | // 10 ATM n-to-one VPC cell transport |
| 219 | // |
| 220 | // The table contains only one entry when the pseudowire type is equal to one of the following. |
| 221 | // |
| 222 | // 2 ATM AAL5 SDU VCC transport |
| 223 | // |
| 224 | // 3 ATM transparent cell transport |
| 225 | // |
| 226 | type PwAtmConfigurationData struct { |
| 227 | ManagedEntityDefinition |
| 228 | Attributes AttributeValueMap |
| 229 | } |
| 230 | |
| 231 | func init() { |
| 232 | pwatmconfigurationdataBME = &ManagedEntityDefinition{ |
| 233 | Name: "PwAtmConfigurationData", |
| 234 | ClassID: 337, |
| 235 | MessageTypes: mapset.NewSetWith( |
| 236 | Create, |
| 237 | Delete, |
| 238 | Get, |
| 239 | GetNext, |
| 240 | Set, |
| 241 | SetTable, |
| 242 | ), |
| 243 | AllowedAttributeMask: 0xff00, |
| 244 | AttributeDefinitions: AttributeDefinitionMap{ |
| 245 | 0: Uint16Field("ManagedEntityId", PointerAttributeType, 0x0000, 0, mapset.NewSetWith(Read, SetByCreate), false, false, false, 0), |
| 246 | 1: ByteField("TpType", UnsignedIntegerAttributeType, 0x8000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 1), |
| 247 | 2: Uint16Field("TransportTpPointer", UnsignedIntegerAttributeType, 0x4000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 2), |
| 248 | 3: Uint16Field("PptpAtmUniPointer", UnsignedIntegerAttributeType, 0x2000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 3), |
| 249 | 4: Uint16Field("MaxCEllCOncatenation", UnsignedIntegerAttributeType, 0x1000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 4), |
| 250 | 5: Uint16Field("FarEndMAxCEllCOncatenation", UnsignedIntegerAttributeType, 0x0800, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 5), |
| 251 | 6: ByteField("AtmCellLossPriorityClpQosMapping", UnsignedIntegerAttributeType, 0x0400, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 6), |
| 252 | 7: ByteField("TimeoutMode", UnsignedIntegerAttributeType, 0x0200, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 7), |
| 253 | 8: TableField("PwAtmMappingTable", TableAttributeType, 0x0100, TableInfo{nil, 21}, mapset.NewSetWith(Read, Write), false, false, false, 8), |
| 254 | }, |
| 255 | Access: CreatedByOlt, |
| 256 | Support: UnknownSupport, |
| 257 | } |
| 258 | } |
| 259 | |
| 260 | // NewPwAtmConfigurationData (class ID 337) creates the basic |
| 261 | // Managed Entity definition that is used to validate an ME of this type that |
| 262 | // is received from or transmitted to the OMCC. |
| 263 | func NewPwAtmConfigurationData(params ...ParamData) (*ManagedEntity, OmciErrors) { |
| 264 | return NewManagedEntity(*pwatmconfigurationdataBME, params...) |
| 265 | } |