Matteo Scandolo | a6a3aee | 2019-11-26 13:30:14 -0700 | [diff] [blame^] | 1 | /* |
| 2 | * Copyright (c) 2018 - present. Boling Consulting Solutions (bcsw.net) |
| 3 | * |
| 4 | * Licensed under the Apache License, Version 2.0 (the "License"); |
| 5 | * you may not use this file except in compliance with the License. |
| 6 | * You may obtain a copy of the License at |
| 7 | * http://www.apache.org/licenses/LICENSE-2.0 |
| 8 | * Unless required by applicable law or agreed to in writing, software |
| 9 | * distributed under the License is distributed on an "AS IS" BASIS, |
| 10 | * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| 11 | * See the License for the specific language governing permissions and |
| 12 | * limitations under the License. |
| 13 | */ |
| 14 | /* |
| 15 | * NOTE: This file was generated, manual edits will be overwritten! |
| 16 | * |
| 17 | * Generated by 'goCodeGenerator.py': |
| 18 | * https://github.com/cboling/OMCI-parser/README.md |
| 19 | */ |
| 20 | package generated |
| 21 | |
| 22 | import "github.com/deckarep/golang-set" |
| 23 | |
| 24 | const PhysicalPathTerminationPointMocaUniClassId ClassID = ClassID(162) |
| 25 | |
| 26 | var physicalpathterminationpointmocauniBME *ManagedEntityDefinition |
| 27 | |
| 28 | // PhysicalPathTerminationPointMocaUni (class ID #162) |
| 29 | // This ME represents an MoCA UNI, where physical paths terminate and physical path level functions |
| 30 | // are performed. |
| 31 | // |
| 32 | // The ONU automatically creates an instance of this ME per port as follows. |
| 33 | // |
| 34 | // • When the ONU has MoCA ports built into its factory configuration. |
| 35 | // |
| 36 | // • When a cardholder is provisioned to expect a circuit pack of the MoCA type. |
| 37 | // |
| 38 | // • When a cardholder provisioned for plug-and-play is equipped with a circuit pack of the MoCA |
| 39 | // type. Note that the installation of a plug-and-play card may indicate the presence of MoCA ports |
| 40 | // via equipment ID as well as its type, and indeed may cause the ONU to instantiate a port-mapping |
| 41 | // package that specifies MoCA ports. |
| 42 | // |
| 43 | // The ONU automatically deletes instances of this ME when a cardholder is neither provisioned to |
| 44 | // expect an MoCA circuit pack, nor is it equipped with an MoCA circuit pack. |
| 45 | // |
| 46 | // Relationships |
| 47 | // An instance of this ME is associated with each real or pre-provisioned MoCA port. |
| 48 | // |
| 49 | // Attributes |
| 50 | // Managed Entity Id |
| 51 | // Managed entity ID: This attribute uniquely identifies each instance of this ME. This 2 byte |
| 52 | // number is directly associated with the physical position of the UNI. The first byte is the slot |
| 53 | // ID (defined in clause 9.1.5). The second byte is the port ID, with the range 1..255. (R) |
| 54 | // (mandatory) (2 bytes) |
| 55 | // |
| 56 | // Loopback Configuration |
| 57 | // Upon ME instantiation, the ONU sets this attribute to 0. (R, W) (optional) (1 byte) |
| 58 | // |
| 59 | // Administrative State |
| 60 | // Administrative state: This attribute locks (1) and unlocks (0) the functions performed by this |
| 61 | // ME. Administrative state is further described in clause A.1.6. (R, W) (mandatory) (1 byte) |
| 62 | // |
| 63 | // Operational State |
| 64 | // Operational state: This attribute indicates whether the ME is capable of performing its |
| 65 | // function. Valid values are enabled (0) and disabled (1). (R) (optional) (1 byte) |
| 66 | // |
| 67 | // Max Frame Size |
| 68 | // Max frame size: This attribute denotes the maximum frame size allowed across this interface. |
| 69 | // Upon ME instantiation, the ONU sets this attribute to 1518. (R, W) (mandatory) (2 bytes) |
| 70 | // |
| 71 | // Arc |
| 72 | // ARC: See clause A.1.4.3. (R, W) (optional) (1 byte) |
| 73 | // |
| 74 | // Arc Interval |
| 75 | // ARC interval: See clause A.1.4.3. (R, W) (optional) (1 byte) |
| 76 | // |
| 77 | // Pppoe Filter |
| 78 | // PPPoE filter: This attribute controls filtering of PPPoE packets on this MoCA port. When its |
| 79 | // value is 1, all packets other than PPPoE packets are discarded. The default 0 accepts packets of |
| 80 | // all types. (R, W) (optional) (1 byte) |
| 81 | // |
| 82 | // Network Status |
| 83 | // (R) (mandatory) (1 byte) |
| 84 | // |
| 85 | // Password |
| 86 | // Password: This attribute specifies the MoCA encryption key. It is an ASCII string of 17 decimal |
| 87 | // digits. Upon ME instantiation, the ONU sets this attribute to 17 null bytes. (R, W) (mandatory) |
| 88 | // (17 bytes) |
| 89 | // |
| 90 | // Privacy Enabled |
| 91 | // Privacy enabled: This attribute activates (1) link-layer security. The default value 0 |
| 92 | // deactivates it. (R, W) (mandatory) (1 byte) |
| 93 | // |
| 94 | // Minimum Bandwidth Alarm Threshold |
| 95 | // Minimum bandwidth alarm threshold: This attribute specifies the minimum desired PHY link |
| 96 | // bandwidth between two nodes. If the actual bandwidth is lower, an LL alarm is declared. Valid |
| 97 | // values are 0 to 0x0410 (260 Mbit/s) in 0.25 Mbit/s increments. The default value is 0x02D0 |
| 98 | // (180 Mbit/s). The value 0 disables the threshold. (R, W) (optional) (2 bytes) |
| 99 | // |
| 100 | // Frequency Mask |
| 101 | // Frequency mask: This attribute is a bit map of the centre frequencies that the interface is |
| 102 | // permitted to use, where each bit represents a centre frequency. The LSB (b[1]) corresponds to |
| 103 | // centre frequency 800 MHz. The next significant bit (b[2]) corresponds to centre frequency |
| 104 | // 825 MHz. The 28th bit (b[28]) corresponds to centre frequency 1500 MHz. The four MSBs are not |
| 105 | // used. (R, W) (optional) (4 bytes) |
| 106 | // |
| 107 | // Rf Channel |
| 108 | // RF channel: This attribute reports the frequency to which the MoCA interface is currently tuned, |
| 109 | // in megahertz. (R) (mandatory) (2 bytes) |
| 110 | // |
| 111 | // Last Operational Frequency |
| 112 | // Last operational frequency: This attribute reports the frequency to which the MoCA interface was |
| 113 | // tuned when last operational, in megahertz. (R) (mandatory) (2 bytes) |
| 114 | // |
| 115 | type PhysicalPathTerminationPointMocaUni struct { |
| 116 | ManagedEntityDefinition |
| 117 | Attributes AttributeValueMap |
| 118 | } |
| 119 | |
| 120 | func init() { |
| 121 | physicalpathterminationpointmocauniBME = &ManagedEntityDefinition{ |
| 122 | Name: "PhysicalPathTerminationPointMocaUni", |
| 123 | ClassID: 162, |
| 124 | MessageTypes: mapset.NewSetWith( |
| 125 | Get, |
| 126 | Set, |
| 127 | ), |
| 128 | AllowedAttributeMask: 0XFFFC, |
| 129 | AttributeDefinitions: AttributeDefinitionMap{ |
| 130 | 0: Uint16Field("ManagedEntityId", 0, mapset.NewSetWith(Read), false, false, false, false, 0), |
| 131 | 1: ByteField("LoopbackConfiguration", 0, mapset.NewSetWith(Read, Write), false, false, true, false, 1), |
| 132 | 2: ByteField("AdministrativeState", 0, mapset.NewSetWith(Read, Write), false, false, false, false, 2), |
| 133 | 3: ByteField("OperationalState", 0, mapset.NewSetWith(Read), true, false, true, false, 3), |
| 134 | 4: Uint16Field("MaxFrameSize", 0, mapset.NewSetWith(Read, Write), false, false, false, false, 4), |
| 135 | 5: ByteField("Arc", 0, mapset.NewSetWith(Read, Write), true, false, true, false, 5), |
| 136 | 6: ByteField("ArcInterval", 0, mapset.NewSetWith(Read, Write), false, false, true, false, 6), |
| 137 | 7: ByteField("PppoeFilter", 0, mapset.NewSetWith(Read, Write), false, false, true, false, 7), |
| 138 | 8: ByteField("NetworkStatus", 0, mapset.NewSetWith(Read), false, false, false, false, 8), |
| 139 | 9: MultiByteField("Password", 17, nil, mapset.NewSetWith(Read, Write), false, false, false, false, 9), |
| 140 | 10: ByteField("PrivacyEnabled", 0, mapset.NewSetWith(Read, Write), false, false, false, false, 10), |
| 141 | 11: Uint16Field("MinimumBandwidthAlarmThreshold", 0, mapset.NewSetWith(Read, Write), false, false, true, false, 11), |
| 142 | 12: Uint32Field("FrequencyMask", 0, mapset.NewSetWith(Read, Write), false, false, true, false, 12), |
| 143 | 13: Uint16Field("RfChannel", 0, mapset.NewSetWith(Read), false, false, false, false, 13), |
| 144 | 14: Uint16Field("LastOperationalFrequency", 0, mapset.NewSetWith(Read), false, false, false, false, 14), |
| 145 | }, |
| 146 | } |
| 147 | } |
| 148 | |
| 149 | // NewPhysicalPathTerminationPointMocaUni (class ID 162 creates the basic |
| 150 | // Managed Entity definition that is used to validate an ME of this type that |
| 151 | // is received from the wire, about to be sent on the wire. |
| 152 | func NewPhysicalPathTerminationPointMocaUni(params ...ParamData) (*ManagedEntity, OmciErrors) { |
| 153 | return NewManagedEntity(physicalpathterminationpointmocauniBME, params...) |
| 154 | } |