vendor/github.com/opencord/omci-lib-go/generated/physicalpathterminationpointvideoani.go

/*
 * Copyright (c) 2018 - present.  Boling Consulting Solutions (bcsw.net)
 * Copyright 2020-present Open Networking Foundation

 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at

 * http://www.apache.org/licenses/LICENSE-2.0

 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
/*
 * NOTE: This file was generated, manual edits will be overwritten!
 *
 * Generated by 'goCodeGenerator.py':
 *              https://github.com/cboling/OMCI-parser/README.md
 */

package generated

import "github.com/deckarep/golang-set"

// PhysicalPathTerminationPointVideoAniClassID is the 16-bit ID for the OMCI
// Managed entity Physical path termination point video ANI
const PhysicalPathTerminationPointVideoAniClassID ClassID = ClassID(90)

var physicalpathterminationpointvideoaniBME *ManagedEntityDefinition

// PhysicalPathTerminationPointVideoAni (class ID #90)
//	This ME represents an RF video ANI in the ONU, where physical paths terminate and physical path
//	level functions are performed.
//
//	The ONU automatically creates an instance of this ME per port as follows.
//
//	o	When the ONU has video ANI ports built into its factory configuration.
//
//	o	When a cardholder is provisioned to expect a circuit pack of the video ANI type.
//
//	o	When a cardholder provisioned for plug-and-play is equipped with a circuit pack of the video
//	ANI type. Note that the installation of a plug-and-play card may indicate the presence of video
//	ANI ports via equipment ID as well as its type, and indeed may cause the ONU to instantiate a
//	port-mapping package that specifies video ANI ports.
//
//	The ONU automatically deletes instances of this ME when a cardholder is neither provisioned to
//	expect a video ANI circuit pack, nor is it equipped with a video ANI circuit pack.
//
//	Relationships
//		An instance of this ME is associated with each instance of a real or pre-provisioned video ANI
//		port.
//
//	Attributes
//		Managed Entity Id
//			Managed entity ID: This attribute uniquely identifies each instance of this ME. This 2-byte
//			number indicates the physical position of the ANI. The first byte is the slot ID (defined in
//			clause 9.1.5). The second byte is the port ID, with the range 1..255. (R) (mandatory) (2-bytes)
//
//		Administrative State
//			Administrative state: This attribute locks (1) and unlocks (0) the functions performed by this
//			ME. Administrative state is further described in clause-A.1.6. (R,-W) (mandatory) (1-byte)
//
//		Operational State
//			Operational state: This attribute indicates whether the ME is capable of performing its
//			function. Valid values are enabled (0) and disabled (1). (R) (optional) (1-byte)
//
//		Arc
//			ARC:	See clause A.1.4.3. (R,-W) (optional) (1-byte)
//
//		Arc Interval
//			ARC interval: See clause A.1.4.3. (R,-W) (optional) (1-byte)
//
//		Frequency Range Low
//			(R) (mandatory) (1-byte)
//
//		Frequency Range High
//			(R) (mandatory) (1-byte)
//
//		Signal Capability
//			(R) (mandatory) (1-byte)
//
//		Optical Signal Level
//			(R) (optional) (1-byte)
//
//		Pilot Signal Level
//			(R) (optional) (1-byte)
//
//		Signal Level Min
//			Signal level min: This attribute indicates the minimum optical RF power per channel that results
//			in a CNR of 47-dBc for a channel of 4.5 MHz bandwidth at a receive optical power of -5-dBm. The
//			unit of this attribute is decibel-microwatt optical. (R) (mandatory) (1-byte)
//
//		Signal Level Max
//			Signal level max: This attribute indicates the maximum optical RF power per channel that results
//			in a CTB of -57-dBc for an 80-channel ensemble of carriers at a perchannel optical modulation
//			index (OMI) of 3.5%. The unit of this attribute is decibel-microwatt optical. (R) (mandatory)
//			(1-byte)
//
//		Pilot Frequency
//			(R,-W) (optional) (4-bytes)
//
//		Agc Mode
//			(R,-W) (optional) (1-byte)
//
//		Agc Setting
//			(R,-W) (optional) (1-byte)
//
//		Video Lower Optical Threshold
//			NOTE - Because the power measurement returned in the optical signal level attribute has a
//			resolution of 1-dB, it is possible that the measured value could appear to be in-range, even
//			though an out-of-range alarm has been declared against a threshold with 0.1-dB resolution.
//
//		Video Upper Optical Threshold
//			Video upper optical threshold: This attribute specifies the optical level used to declare the
//			video OOR high alarm. Valid values are -12 to +6-dBm in 0.1-dB increments, represented as a 2s
//			complement integer. (Coding -120 to +60, 0x00-= 0-dBm, 0x88-= -12.0-dBm, etc.) Upon ME
//			instantiation, the ONU sets this attribute to 0x19 (+2.5-dBm). (R,-W) (optional) (1-byte)
//
type PhysicalPathTerminationPointVideoAni struct {
	ManagedEntityDefinition
	Attributes AttributeValueMap
}

func init() {
	physicalpathterminationpointvideoaniBME = &ManagedEntityDefinition{
		Name:    "PhysicalPathTerminationPointVideoAni",
		ClassID: 90,
		MessageTypes: mapset.NewSetWith(
			Get,
			Set,
		),
		AllowedAttributeMask: 0xffff,
		AttributeDefinitions: AttributeDefinitionMap{
			0:  Uint16Field("ManagedEntityId", PointerAttributeType, 0x0000, 0, mapset.NewSetWith(Read), false, false, false, 0),
			1:  ByteField("AdministrativeState", UnsignedIntegerAttributeType, 0x8000, 0, mapset.NewSetWith(Read, Write), false, false, false, 1),
			2:  ByteField("OperationalState", UnsignedIntegerAttributeType, 0x4000, 0, mapset.NewSetWith(Read), true, true, false, 2),
			3:  ByteField("Arc", UnsignedIntegerAttributeType, 0x2000, 0, mapset.NewSetWith(Read, Write), true, true, false, 3),
			4:  ByteField("ArcInterval", UnsignedIntegerAttributeType, 0x1000, 0, mapset.NewSetWith(Read, Write), false, true, false, 4),
			5:  ByteField("FrequencyRangeLow", UnsignedIntegerAttributeType, 0x0800, 0, mapset.NewSetWith(Read), false, false, false, 5),
			6:  ByteField("FrequencyRangeHigh", UnsignedIntegerAttributeType, 0x0400, 0, mapset.NewSetWith(Read), false, false, false, 6),
			7:  ByteField("SignalCapability", UnsignedIntegerAttributeType, 0x0200, 0, mapset.NewSetWith(Read), false, false, false, 7),
			8:  ByteField("OpticalSignalLevel", UnsignedIntegerAttributeType, 0x0100, 0, mapset.NewSetWith(Read), false, true, false, 8),
			9:  ByteField("PilotSignalLevel", UnsignedIntegerAttributeType, 0x0080, 0, mapset.NewSetWith(Read), false, true, false, 9),
			10: ByteField("SignalLevelMin", UnsignedIntegerAttributeType, 0x0040, 0, mapset.NewSetWith(Read), false, false, false, 10),
			11: ByteField("SignalLevelMax", UnsignedIntegerAttributeType, 0x0020, 0, mapset.NewSetWith(Read), false, false, false, 11),
			12: Uint32Field("PilotFrequency", UnsignedIntegerAttributeType, 0x0010, 0, mapset.NewSetWith(Read, Write), false, true, false, 12),
			13: ByteField("AgcMode", UnsignedIntegerAttributeType, 0x0008, 0, mapset.NewSetWith(Read, Write), false, true, false, 13),
			14: ByteField("AgcSetting", UnsignedIntegerAttributeType, 0x0004, 0, mapset.NewSetWith(Read, Write), false, true, false, 14),
			15: ByteField("VideoLowerOpticalThreshold", UnsignedIntegerAttributeType, 0x0002, 0, mapset.NewSetWith(Read, Write), false, true, false, 15),
			16: ByteField("VideoUpperOpticalThreshold", UnsignedIntegerAttributeType, 0x0001, 0, mapset.NewSetWith(Read, Write), false, true, false, 16),
		},
		Access:  CreatedByOnu,
		Support: UnknownSupport,
		Alarms: AlarmMap{
			0: "Video LOS",
			1: "Video OOR low",
			2: "Video OOR high",
		},
	}
}

// NewPhysicalPathTerminationPointVideoAni (class ID 90) creates the basic
// Managed Entity definition that is used to validate an ME of this type that
// is received from or transmitted to the OMCC.
func NewPhysicalPathTerminationPointVideoAni(params ...ParamData) (*ManagedEntity, OmciErrors) {
	return NewManagedEntity(*physicalpathterminationpointvideoaniBME, params...)
}