blob: b5fa6da09186d3588293279b766d95e736fb847b [file] [log] [blame]
Matteo Scandolofbcbdb82020-05-06 15:41:32 -07001// Copyright 2019-present Open Networking Foundation
2//
3// Licensed under the Apache License, Version 2.0 (the "License");
4// you may not use this file except in compliance with the License.
5// You may obtain a copy of the License at
6//
7// http://www.apache.org/licenses/LICENSE-2.0
8//
9// Unless required by applicable law or agreed to in writing, software
10// distributed under the License is distributed on an "AS IS" BASIS,
11// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
12// See the License for the specific language governing permissions and
13// limitations under the License.
14
Matteo Scandolo39c531a2021-01-22 16:05:32 -080015// deploy VOLTHA and performs a scale test
Matteo Scandolofbcbdb82020-05-06 15:41:32 -070016
Matteo Scandolobaf74892021-04-02 11:03:51 -070017library identifier: 'cord-jenkins-libraries@master',
18 retriever: modernSCM([
19 $class: 'GitSCMSource',
20 remote: 'https://gerrit.opencord.org/ci-management.git'
21])
22
Matteo Scandolo0e8c23a2021-03-26 11:21:54 -070023// this function generates the correct parameters for ofAgent
Andrea Campanella06ca3622021-05-26 12:14:44 +020024// to connect to multiple ONOS instances
Matteo Scandolo0e8c23a2021-03-26 11:21:54 -070025def ofAgentConnections(numOfOnos, releaseName, namespace) {
26 def params = " "
27 numOfOnos.times {
28 params += "--set voltha.services.controller[${it}].address=${releaseName}-onos-classic-${it}.${releaseName}-onos-classic-hs.${namespace}.svc:6653 "
29 }
30 return params
31}
32
Matteo Scandolofbcbdb82020-05-06 15:41:32 -070033pipeline {
34
35 /* no label, executor is determined by JJB */
36 agent {
37 label "${params.buildNode}"
38 }
39 options {
Andrea Campanellac68b8d72020-09-24 11:25:47 +020040 timeout(time: 60, unit: 'MINUTES')
Matteo Scandolofbcbdb82020-05-06 15:41:32 -070041 }
42 environment {
Matteo Scandoloc3dea532020-06-04 10:46:49 -070043 JENKINS_NODE_COOKIE="dontKillMe" // do not kill processes after the build is done
Matteo Scandolofbcbdb82020-05-06 15:41:32 -070044 KUBECONFIG="$HOME/.kube/config"
45 VOLTCONFIG="$HOME/.volt/config"
Matteo Scandolob70b3e02020-05-07 11:50:26 -070046 SSHPASS="karaf"
Matteo Scandolofbcbdb82020-05-06 15:41:32 -070047 VOLTHA_LOG_LEVEL="${logLevel}"
48 NUM_OF_BBSIM="${olts}"
Matteo Scandolo0430f672020-05-07 11:50:26 -070049 NUM_OF_OPENONU="${openonuAdapterReplicas}"
50 NUM_OF_ONOS="${onosReplicas}"
51 NUM_OF_ATOMIX="${atomixReplicas}"
Matteo Scandolod3247ae2021-04-07 12:55:55 -070052 EXTRA_HELM_FLAGS=" "
Matteo Scandolo7d6695c2020-08-25 13:13:16 -070053
Matteo Scandoloecc7c7f2021-03-16 09:34:45 -070054 APPS_TO_LOG="etcd kafka onos-classic adapter-open-onu adapter-open-olt rw-core ofagent bbsim radius bbsim-sadis-server onos-config-loader"
Matteo Scandolof54c9b32020-08-27 07:58:27 -070055 LOG_FOLDER="$WORKSPACE/logs"
Matteo Scandolo5f72f522020-11-02 17:59:44 -080056
57 GERRIT_PROJECT="${GERRIT_PROJECT}"
Matteo Scandolofbcbdb82020-05-06 15:41:32 -070058 }
59
60 stages {
61 stage ('Cleanup') {
Matteo Scandolofbcbdb82020-05-06 15:41:32 -070062 steps {
Matteo Scandoloa731f8f2020-05-11 10:27:26 -070063 timeout(time: 11, unit: 'MINUTES') {
Matteo Scandolobaf74892021-04-02 11:03:51 -070064 script {
65 helmTeardown(["default"])
66 }
Matteo Scandolo39c531a2021-01-22 16:05:32 -080067 sh returnStdout: false, script: '''
Matteo Scandolod2e2a0d2020-06-10 18:02:03 -070068 helm repo add onf https://charts.opencord.org
Matteo Scandolod2e2a0d2020-06-10 18:02:03 -070069 helm repo update
70
Matteo Scandolod4064492020-11-13 10:48:30 -080071 # remove orphaned port-forward from different namespaces
Andrea Campanella4c8af942021-05-12 10:12:13 +020072 ps aux | grep port-forw | grep -v grep | awk '{print $2}' | xargs --no-run-if-empty kill -9 || true
Matteo Scandolod4064492020-11-13 10:48:30 -080073
Matteo Scandoloa731f8f2020-05-11 10:27:26 -070074 cd $WORKSPACE
75 rm -rf $WORKSPACE/*
Matteo Scandolo39c531a2021-01-22 16:05:32 -080076 '''
Matteo Scandolo3f2e4152020-09-22 15:55:27 -070077 }
Matteo Scandolofbcbdb82020-05-06 15:41:32 -070078 }
79 }
Matteo Scandolo49bc0472021-04-20 09:37:55 -070080 stage('Download Code') {
Matteo Scandolofbcbdb82020-05-06 15:41:32 -070081 steps {
Matteo Scandolo49bc0472021-04-20 09:37:55 -070082 getVolthaCode([
83 branch: "${release}",
84 volthaSystemTestsChange: "${volthaSystemTestsChange}",
85 volthaHelmChartsChange: "${volthaHelmChartsChange}",
Matteo Scandolofbcbdb82020-05-06 15:41:32 -070086 ])
Matteo Scandolo11311742021-01-25 13:56:22 -080087 }
88 }
Matteo Scandolo9cdacc52020-10-21 14:54:06 -070089 stage('Build patch') {
90 when {
91 expression {
Matteo Scandolo65f80bf2020-11-03 10:57:03 -080092 return params.GERRIT_PROJECT
Matteo Scandolo9cdacc52020-10-21 14:54:06 -070093 }
94 }
95 steps {
96 sh """
Matteo Scandolo5f72f522020-11-02 17:59:44 -080097 git clone https://\$GERRIT_HOST/\$GERRIT_PROJECT
98 cd \$GERRIT_PROJECT
99 git fetch https://\$GERRIT_HOST/\$GERRIT_PROJECT \$GERRIT_REFSPEC && git checkout FETCH_HEAD
Matteo Scandolo9cdacc52020-10-21 14:54:06 -0700100
101 DOCKER_REGISTRY=${dockerRegistry}/ DOCKER_REPOSITORY=voltha/ DOCKER_TAG=voltha-scale make docker-build
102 DOCKER_REGISTRY=${dockerRegistry}/ DOCKER_REPOSITORY=voltha/ DOCKER_TAG=voltha-scale make docker-push
103 """
104 }
105 }
Matteo Scandolo0430f672020-05-07 11:50:26 -0700106 stage('Deploy common infrastructure') {
Matteo Scandoloa8afe122020-05-11 10:45:56 -0700107 // includes monitoring, kafka, etcd
Matteo Scandolo0430f672020-05-07 11:50:26 -0700108 steps {
109 sh '''
Matteo Scandolo39c531a2021-01-22 16:05:32 -0800110 helm install kafka $HOME/teone/helm-charts/kafka --set replicaCount=${kafkaReplicas},replicas=${kafkaReplicas} --set persistence.enabled=false \
Matteo Scandolo070ded82020-11-02 12:54:05 -0800111 --set zookeeper.replicaCount=${kafkaReplicas} --set zookeeper.persistence.enabled=false \
112 --set prometheus.kafka.enabled=true,prometheus.operator.enabled=true,prometheus.jmx.enabled=true,prometheus.operator.serviceMonitor.namespace=default
Matteo Scandolo0430f672020-05-07 11:50:26 -0700113
Matteo Scandolocb580f62020-06-12 12:55:07 -0700114 # the ETCD chart use "auth" for resons different than BBsim, so strip that away
115 ETCD_FLAGS=$(echo ${extraHelmFlags} | sed -e 's/--set auth=false / /g') | sed -e 's/--set auth=true / /g'
Matteo Scandolo70a1aa82020-11-10 14:04:59 -0800116 ETCD_FLAGS+=" --set auth.rbac.enabled=false,persistence.enabled=false,statefulset.replicaCount=${etcdReplicas}"
Matteo Scandoloccc06192020-06-22 10:16:17 -0700117 ETCD_FLAGS+=" --set memoryMode=${inMemoryEtcdStorage} "
Matteo Scandolo39c531a2021-01-22 16:05:32 -0800118 helm install --set replicas=${etcdReplicas} etcd $HOME/teone/helm-charts/etcd $ETCD_FLAGS
Matteo Scandoloa8afe122020-05-11 10:45:56 -0700119
Matteo Scandolo0430f672020-05-07 11:50:26 -0700120 if [ ${withMonitoring} = true ] ; then
Matteo Scandolo39c531a2021-01-22 16:05:32 -0800121 helm install nem-monitoring onf/nem-monitoring \
Matteo Scandolo8f185c32020-07-16 16:30:04 -0700122 -f $HOME/voltha-scale/grafana.yaml \
Matteo Scandolob70b3e02020-05-07 11:50:26 -0700123 --set prometheus.alertmanager.enabled=false,prometheus.pushgateway.enabled=false \
124 --set kpi_exporter.enabled=false,dashboards.xos=false,dashboards.onos=false,dashboards.aaa=false,dashboards.voltha=false
Matteo Scandolo0430f672020-05-07 11:50:26 -0700125 fi
Matteo Scandolo0430f672020-05-07 11:50:26 -0700126 '''
127 }
128 }
Matteo Scandolofbcbdb82020-05-06 15:41:32 -0700129 stage('Deploy Voltha') {
130 steps {
Matteo Scandolob2de2032021-02-26 10:04:02 -0800131 timeout(time: 10, unit: 'MINUTES') {
132 script {
Matteo Scandolo064efbc2021-03-29 17:24:34 -0700133 sh returnStdout: false, script: '''
134 # start logging with kail
135
136 mkdir -p $LOG_FOLDER
137
138 list=($APPS_TO_LOG)
139 for app in "${list[@]}"
140 do
141 echo "Starting logs for: ${app}"
142 _TAG=kail-$app kail -l app=$app --since 1h > $LOG_FOLDER/$app.log&
143 done
144 '''
Andrea Campanella238bd362021-04-07 12:30:15 +0200145 def returned_flags = sh (returnStdout: true, script: """
Matteo Scandolod43064b2020-07-13 17:18:45 -0700146
Matteo Scandolob2de2032021-02-26 10:04:02 -0800147 export EXTRA_HELM_FLAGS+=' '
Matteo Scandoloc9dd44f2020-06-18 15:06:04 -0700148
Matteo Scandolob2de2032021-02-26 10:04:02 -0800149 # BBSim custom image handling
150 if [ '${bbsimImg.trim()}' != '' ] && [ '\$GERRIT_PROJECT' != 'bbsim' ]; then
151 IFS=: read -r bbsimRepo bbsimTag <<< '${bbsimImg.trim()}'
152 EXTRA_HELM_FLAGS+="--set images.bbsim.repository=\$bbsimRepo,images.bbsim.tag=\$bbsimTag "
153 fi
Matteo Scandolo7e8a6962020-08-04 12:19:59 -0700154
Matteo Scandolob2de2032021-02-26 10:04:02 -0800155 # VOLTHA custom image handling
156 if [ '${rwCoreImg.trim()}' != '' ] && [ '\$GERRIT_PROJECT' != 'voltha-go' ]; then
157 IFS=: read -r rwCoreRepo rwCoreTag <<< '${rwCoreImg.trim()}'
158 EXTRA_HELM_FLAGS+="--set voltha.images.rw_core.repository=\$rwCoreRepo,voltha.images.rw_core.tag=\$rwCoreTag "
159 fi
Matteo Scandolo39c531a2021-01-22 16:05:32 -0800160
Matteo Scandolob2de2032021-02-26 10:04:02 -0800161 # ofAgent custom image handling
162 if [ '${ofAgentImg.trim()}' != '' ] && [ '\$GERRIT_PROJECT' != 'of-agent' ]; then
163 IFS=: read -r ofAgentRepo ofAgentTag <<< '${ofAgentImg.trim()}'
164 EXTRA_HELM_FLAGS+="--set voltha.images.ofagent.repository=\$ofAgentRepo,voltha.images.ofagent.tag=\$ofAgentTag "
165 fi
Matteo Scandolo7e8a6962020-08-04 12:19:59 -0700166
Matteo Scandolob2de2032021-02-26 10:04:02 -0800167 # OpenOLT custom image handling
168 if [ '${openoltAdapterImg.trim()}' != '' ] && [ '\$GERRIT_PROJECT' != 'voltha-openolt-adapter' ]; then
169 IFS=: read -r openoltAdapterRepo openoltAdapterTag <<< '${openoltAdapterImg.trim()}'
170 EXTRA_HELM_FLAGS+="--set voltha-adapter-openolt.images.adapter_open_olt.repository=\$openoltAdapterRepo,voltha-adapter-openolt.images.adapter_open_olt.tag=\$openoltAdapterTag "
171 fi
Matteo Scandolo7e8a6962020-08-04 12:19:59 -0700172
Matteo Scandolob2de2032021-02-26 10:04:02 -0800173 # OpenONU custom image handling
174 if [ '${openonuAdapterImg.trim()}' != '' ] && [ '\$GERRIT_PROJECT' != 'voltha-openonu-adapter' ]; then
175 IFS=: read -r openonuAdapterRepo openonuAdapterTag <<< '${openonuAdapterImg.trim()}'
176 EXTRA_HELM_FLAGS+="--set voltha-adapter-openonu.images.adapter_open_onu.repository=\$openonuAdapterRepo,voltha-adapter-openonu.images.adapter_open_onu.tag=\$openonuAdapterTag "
177 fi
Matteo Scandolo7e8a6962020-08-04 12:19:59 -0700178
Matteo Scandolob2de2032021-02-26 10:04:02 -0800179 # OpenONU GO custom image handling
180 if [ '${openonuAdapterGoImg.trim()}' != '' ] && [ '\$GERRIT_PROJECT' != 'voltha-openonu-adapter-go' ]; then
181 IFS=: read -r openonuAdapterGoRepo openonuAdapterGoTag <<< '${openonuAdapterGoImg.trim()}'
182 EXTRA_HELM_FLAGS+="--set voltha-adapter-openonu.images.adapter_open_onu_go.repository=\$openonuAdapterGoRepo,voltha-adapter-openonu.images.adapter_open_onu_go.tag=\$openonuAdapterGoTag "
183 fi
Andrea Campanella28763082020-11-18 10:55:31 +0100184
Matteo Scandolob2de2032021-02-26 10:04:02 -0800185 # ONOS custom image handling
186 if [ '${onosImg.trim()}' != '' ] && [ '\$GERRIT_PROJECT' != 'voltha-onos' ]; then
187 IFS=: read -r onosRepo onosTag <<< '${onosImg.trim()}'
Andrea Campanella4fca92c2021-03-08 13:08:28 +0100188 EXTRA_HELM_FLAGS+="--set onos-classic.image.repository=\$onosRepo,onos-classic.image.tag=\$onosTag "
Matteo Scandolob2de2032021-02-26 10:04:02 -0800189 fi
Matteo Scandolo7e8a6962020-08-04 12:19:59 -0700190
Matteo Scandolob2de2032021-02-26 10:04:02 -0800191 # set BBSim parameters
192 EXTRA_HELM_FLAGS+='--set enablePerf=true,pon=${pons},onu=${onus} '
Matteo Scandolo1c5ffab2020-07-17 08:53:01 -0700193
Matteo Scandolob2de2032021-02-26 10:04:02 -0800194 # disable the securityContext, this is a development cluster
195 EXTRA_HELM_FLAGS+='--set securityContext.enabled=false '
Matteo Scandolo1c5ffab2020-07-17 08:53:01 -0700196
Matteo Scandolob2de2032021-02-26 10:04:02 -0800197 # No persistent-volume-claims in Atomix
198 EXTRA_HELM_FLAGS+="--set onos-classic.atomix.persistence.enabled=false "
Matteo Scandolod2e2a0d2020-06-10 18:02:03 -0700199
Matteo Scandolob2de2032021-02-26 10:04:02 -0800200 # Use custom built images
Matteo Scandolo9cdacc52020-10-21 14:54:06 -0700201
Matteo Scandolob2de2032021-02-26 10:04:02 -0800202 if [ '\$GERRIT_PROJECT' == 'voltha-go' ]; then
203 EXTRA_HELM_FLAGS+="--set voltha.images.rw_core.repository=${dockerRegistry}/voltha/voltha-rw-core,voltha.images.rw_core.tag=voltha-scale "
204 fi
Matteo Scandolo9cdacc52020-10-21 14:54:06 -0700205
Matteo Scandolob2de2032021-02-26 10:04:02 -0800206 if [ '\$GERRIT_PROJECT' == 'voltha-openolt-adapter' ]; then
207 EXTRA_HELM_FLAGS+="--set voltha-openolt-adapter.images.adapter_open_olt.repository=${dockerRegistry}/voltha/voltha-openolt-adapter,voltha-openolt-adapter.images.adapter_open_olt.tag=voltha-scale "
208 fi
Matteo Scandolo9cdacc52020-10-21 14:54:06 -0700209
Matteo Scandolob2de2032021-02-26 10:04:02 -0800210 if [ '\$GERRIT_PROJECT' == 'voltha-openonu-adapter' ]; then
211 EXTRA_HELM_FLAGS+="--set voltha-openonu-adapter.images.adapter_open_onu.repository=${dockerRegistry}/voltha/voltha-openonu-adapter,voltha-openonu-adapter.images.adapter_open_onu.tag=voltha-scale "
212 fi
Matteo Scandolo9cdacc52020-10-21 14:54:06 -0700213
Matteo Scandolob2de2032021-02-26 10:04:02 -0800214 if [ '\$GERRIT_PROJECT' == 'voltha-openonu-adapter-go' ]; then
215 EXTRA_HELM_FLAGS+="--set voltha-openonu-adapter-go.images.adapter_open_onu_go.repository=${dockerRegistry}/voltha/voltha-openonu-adapter-go,voltha-openonu-adapter-go.images.adapter_open_onu_go.tag=voltha-scale "
216 fi
Andrea Campanellaed026982020-11-20 10:06:42 +0100217
Matteo Scandolob2de2032021-02-26 10:04:02 -0800218 if [ '\$GERRIT_PROJECT' == 'ofagent-go' ]; then
219 EXTRA_HELM_FLAGS+="--set voltha.images.ofagent.repository=${dockerRegistry}/voltha/voltha-ofagent-go,ofagent-go.images.ofagent.tag=voltha-scale "
220 fi
Matteo Scandolo9cdacc52020-10-21 14:54:06 -0700221
Matteo Scandolob2de2032021-02-26 10:04:02 -0800222 if [ '\$GERRIT_PROJECT' == 'voltha-onos' ]; then
Andrea Campanella4fca92c2021-03-08 13:08:28 +0100223 EXTRA_HELM_FLAGS+="--set onos-classic.image.repository=${dockerRegistry}/voltha/voltha-onos,onos-classic.image.tag=voltha-scale "
Matteo Scandolob2de2032021-02-26 10:04:02 -0800224 fi
Matteo Scandolo9cdacc52020-10-21 14:54:06 -0700225
Matteo Scandolob2de2032021-02-26 10:04:02 -0800226 if [ '\$GERRIT_PROJECT' == 'bbsim' ]; then
227 EXTRA_HELM_FLAGS+="--set images.bbsim.repository=${dockerRegistry}/voltha/bbsim,images.bbsim.tag=voltha-scale "
228 fi
Andrea Campanella238bd362021-04-07 12:30:15 +0200229 echo \$EXTRA_HELM_FLAGS
230
231 """).trim()
232
Matteo Scandolod3247ae2021-04-07 12:55:55 -0700233 def extraHelmFlags = returned_flags
Andrea Campanella15f22942021-04-08 17:24:21 +0200234 // The added space before params.extraHelmFlags is required due to the .trim() above
Matteo Scandoloed1afdd2021-04-02 16:25:45 -0700235 def infraHelmFlags =
Matteo Scandolobaf74892021-04-02 11:03:51 -0700236 " --set etcd.enabled=false,kafka.enabled=false" +
Matteo Scandoloed1afdd2021-04-02 16:25:45 -0700237 " --set global.log_level=${logLevel} " +
Matteo Scandolofa49b8d2021-04-09 12:05:34 -0700238 "--set onos-classic.onosSshPort=30115 " +
239 "--set onos-classic.onosApiPort=30120 " +
Andrea Campanella15f22942021-04-08 17:24:21 +0200240 extraHelmFlags + " " + params.extraHelmFlags
Matteo Scandolobaf74892021-04-02 11:03:51 -0700241
Andrea Campanella238bd362021-04-07 12:30:15 +0200242 println "Passing the following parameters to the VOLTHA infra deploy: ${infraHelmFlags}."
243
Matteo Scandolo49bc0472021-04-20 09:37:55 -0700244 def localCharts = false
245 if (volthaHelmChartsChange != "") {
246 localCharts = true
247 }
248
Matteo Scandolobaf74892021-04-02 11:03:51 -0700249 volthaInfraDeploy([
250 workflow: workflow,
251 infraNamespace: "default",
252 extraHelmFlags: infraHelmFlags,
Matteo Scandolo49bc0472021-04-20 09:37:55 -0700253 localCharts: localCharts,
Matteo Scandolobaf74892021-04-02 11:03:51 -0700254 onosReplica: onosReplicas,
255 atomixReplica: atomixReplicas,
256 ])
257
Matteo Scandoloed1afdd2021-04-02 16:25:45 -0700258 def stackHelmFlags = "${ofAgentConnections(onosReplicas.toInteger(), "voltha-infra", "default")} " +
Matteo Scandolobaf74892021-04-02 11:03:51 -0700259 "--set voltha.services.kafka.adapter.address=kafka.default.svc:9092 " +
260 "--set voltha.services.kafka.cluster.address=kafka.default.svc:9092 " +
261 "--set voltha.services.etcd.address=etcd.default.svc:2379 " +
262 "--set voltha-adapter-openolt.services.kafka.adapter.address=kafka.default.svc:9092 " +
263 "--set voltha-adapter-openolt.services.kafka.cluster.address=kafka.default.svc:9092 " +
264 "--set voltha-adapter-openolt.services.etcd.address=etcd.default.svc:2379 " +
265 "--set voltha-adapter-openonu.services.kafka.adapter.address=kafka.default.svc:9092 " +
266 "--set voltha-adapter-openonu.services.kafka.cluster.address=kafka.default.svc:9092 " +
267 "--set voltha-adapter-openonu.services.etcd.address=etcd.default.svc:2379"
268
269 stackHelmFlags += " --set onu=${onus},pon=${pons} --set global.log_level=${logLevel.toLowerCase()} "
Matteo Scandolofa49b8d2021-04-09 12:05:34 -0700270 stackHelmFlags += " --set voltha.ingress.enabled=true --set voltha.ingress.enableVirtualHosts=true --set voltha.fullHostnameOverride=voltha.scale1.dev "
Andrea Campanellad51833b2021-04-09 15:42:59 +0200271 stackHelmFlags += extraHelmFlags + " " + params.extraHelmFlags
Matteo Scandolobaf74892021-04-02 11:03:51 -0700272
273 volthaStackDeploy([
274 bbsimReplica: olts.toInteger(),
275 infraNamespace: "default",
276 volthaNamespace: "default",
277 stackName: "voltha1", // TODO support custom charts
278 workflow: workflow,
279 extraHelmFlags: stackHelmFlags,
280 localCharts: false,
281 ])
Matteo Scandolodbda3272021-03-04 14:50:07 -0800282 sh """
283 set +x
Matteo Scandolob2de2032021-02-26 10:04:02 -0800284
Andrea Campanella4fca92c2021-03-08 13:08:28 +0100285 echo -ne "\nWaiting for VOLTHA and ONOS to start..."
Matteo Scandolo39c531a2021-01-22 16:05:32 -0800286 voltha=\$(kubectl get pods --all-namespaces -l app.kubernetes.io/part-of=voltha --no-headers | grep "0/" | wc -l)
Andrea Campanella4fca92c2021-03-08 13:08:28 +0100287 onos=\$(kubectl get pods --all-namespaces -l app=onos-classic --no-headers | grep "0/" | wc -l)
Andrea Campanellaae871e42021-03-08 18:52:25 +0100288 while [[ \$voltha != 0 || \$onos != 0 ]]; do
Matteo Scandolob2de2032021-02-26 10:04:02 -0800289 sleep 5
290 echo -ne "."
291 voltha=\$(kubectl get pods --all-namespaces -l app.kubernetes.io/part-of=voltha --no-headers | grep "0/" | wc -l)
Andrea Campanella4fca92c2021-03-08 13:08:28 +0100292 onos=\$(kubectl get pods --all-namespaces -l app=onos-classic --no-headers | grep "0/" | wc -l)
Matteo Scandolob2de2032021-02-26 10:04:02 -0800293 done
Andrea Campanellaae871e42021-03-08 18:52:25 +0100294 echo -ne "\nVOLTHA and ONOS pods ready\n"
295 kubectl get pods --all-namespaces -l app.kubernetes.io/part-of=voltha --no-headers | grep "0/" | wc -l
296 kubectl get pods --all-namespaces -l app=onos-classic --no-headers | grep "0/" | wc -l
Matteo Scandolob2de2032021-02-26 10:04:02 -0800297 """
Matteo Scandolodbda3272021-03-04 14:50:07 -0800298 start_port_forward(olts)
Matteo Scandolob2de2032021-02-26 10:04:02 -0800299 }
Matteo Scandolofbcbdb82020-05-06 15:41:32 -0700300 }
301 }
302 }
Matteo Scandolo0430f672020-05-07 11:50:26 -0700303 stage('Configuration') {
Matteo Scandolofbcbdb82020-05-06 15:41:32 -0700304 steps {
Matteo Scandolo37cba472020-10-26 14:15:34 -0700305 script {
Andrea Campanellaf2460e8fb2021-03-15 22:03:09 +0100306 def tech_prof_directory = "XGS-PON"
Matteo Scandolo37cba472020-10-26 14:15:34 -0700307 sh returnStdout: false, script: """
Matteo Scandolo0430f672020-05-07 11:50:26 -0700308 #Setting link discovery
Matteo Scandolofa49b8d2021-04-09 12:05:34 -0700309 sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 cfg set org.onosproject.provider.lldp.impl.LldpLinkProvider enabled ${withLLDP}
Matteo Scandolo0430f672020-05-07 11:50:26 -0700310
Matteo Scandolofa49b8d2021-04-09 12:05:34 -0700311 sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 cfg set org.onosproject.net.flow.impl.FlowRuleManager allowExtraneousRules true
312 sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 cfg set org.onosproject.net.flow.impl.FlowRuleManager importExtraneousRules true
Matteo Scandolo2264d9c2020-10-16 14:25:32 -0700313
Matteo Scandolo9cdacc52020-10-21 14:54:06 -0700314
Matteo Scandolofa49b8d2021-04-09 12:05:34 -0700315 sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 cfg set org.onosproject.net.flowobjective.impl.InOrderFlowObjectiveManager accumulatorMaxBatchMillis 900
Andrea Campanelladeec1582020-10-28 09:37:58 +0100316
Matteo Scandolofa49b8d2021-04-09 12:05:34 -0700317 sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 cfg set org.onosproject.net.flowobjective.impl.InOrderFlowObjectiveManager accumulatorMaxIdleMillis 500
Andrea Campanelladeec1582020-10-28 09:37:58 +0100318
Matteo Scandolofa49b8d2021-04-09 12:05:34 -0700319 sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 cfg set org.opencord.olt.impl.Olt provisionDelay 1000
Matteo Scandoloea061332021-03-25 16:26:22 -0700320
Matteo Scandolofa49b8d2021-04-09 12:05:34 -0700321 sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 log:set ${logLevel} org.onosproject
322 sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 log:set ${logLevel} org.opencord
Andrea Campanella33b48722020-10-23 12:31:47 +0200323
Matteo Scandolofa49b8d2021-04-09 12:05:34 -0700324 # sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 log:set DEBUG org.opencord.cordmcast
325 # sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 log:set DEBUG org.onosproject.mcast
326 # sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 log:set DEBUG org.opencord.igmpproxy
327 # sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 log:set DEBUG org.opencord.olt
Andrea Campanella08561cf2021-04-30 16:02:57 +0200328 # sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 log:set DEBUG org.onosproject.net.flowobjective.impl.FlowObjectiveManager
Matteo Scandoloc348aea2020-10-07 13:36:04 -0700329
Matteo Scandolo37cba472020-10-26 14:15:34 -0700330 kubectl exec \$(kubectl get pods | grep -E "bbsim[0-9]" | awk 'NR==1{print \$1}') -- bbsimctl log ${logLevel.toLowerCase()} false
Matteo Scandolo0430f672020-05-07 11:50:26 -0700331
Andrea Campanella15f22942021-04-08 17:24:21 +0200332 # Set Flows/Ports/Meters/Groups poll frequency
Matteo Scandolofa49b8d2021-04-09 12:05:34 -0700333 sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 cfg set org.onosproject.provider.of.flow.impl.OpenFlowRuleProvider flowPollFrequency ${onosStatInterval}
334 sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 cfg set org.onosproject.provider.of.device.impl.OpenFlowDeviceProvider portStatsPollFrequency ${onosStatInterval}
335 sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 cfg set org.onosproject.provider.of.group.impl.OpenFlowGroupProvider groupPollInterval ${onosGroupInterval}
Andrea Campanella55f0f0e2021-04-15 18:50:54 +0200336 sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 cfg set org.onosproject.net.flowobjective.impl.FlowObjectiveManager numThreads ${flowObjWorkerThreads}
Andrea Campanella9c93ded2021-04-29 18:59:53 +0200337 sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 cfg set org.onosproject.net.flowobjective.impl.InOrderFlowObjectiveManager objectiveTimeoutMs 300000
Matteo Scandolo3136cca2020-05-15 14:14:27 -0700338
Matteo Scandolo0430f672020-05-07 11:50:26 -0700339 if [ ${withFlows} = false ]; then
Matteo Scandolofa49b8d2021-04-09 12:05:34 -0700340 sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 app deactivate org.opencord.olt
Matteo Scandolo0430f672020-05-07 11:50:26 -0700341 fi
342
Andrea Campanellaf2460e8fb2021-03-15 22:03:09 +0100343 if [ '${workflow}' = 'tt' ]; then
344 etcd_container=\$(kubectl get pods --all-namespaces | grep etcd | awk 'NR==1{print \$2}')
345 kubectl cp $WORKSPACE/voltha-system-tests/tests/data/TechProfile-TT-HSIA.json \$etcd_container:/tmp/hsia.json
346 put_result=\$(kubectl exec -it \$etcd_container -- /bin/sh -c 'cat /tmp/hsia.json | ETCDCTL_API=3 etcdctl put service/voltha/technology_profiles/${tech_prof_directory}/64')
347 kubectl cp $WORKSPACE/voltha-system-tests/tests/data/TechProfile-TT-VoIP.json \$etcd_container:/tmp/voip.json
348 put_result=\$(kubectl exec -it \$etcd_container -- /bin/sh -c 'cat /tmp/voip.json | ETCDCTL_API=3 etcdctl put service/voltha/technology_profiles/${tech_prof_directory}/65')
Girish Gowdra5d6c1272021-05-25 23:36:27 -0700349 kubectl cp $WORKSPACE/voltha-system-tests/tests/data/TechProfile-TT-MCAST-AdditionalBW-NA.json \$etcd_container:/tmp/mcast.json
Andrea Campanellaf2460e8fb2021-03-15 22:03:09 +0100350 put_result=\$(kubectl exec -it \$etcd_container -- /bin/sh -c 'cat /tmp/mcast.json | ETCDCTL_API=3 etcdctl put service/voltha/technology_profiles/${tech_prof_directory}/66')
351 fi
352
Matteo Scandoloc9dd44f2020-06-18 15:06:04 -0700353 if [ ${withPcap} = true ] ; then
Matteo Scandolo34d6a7a2020-10-20 09:29:58 -0700354 # Start the tcp-dump in ofagent
Matteo Scandolo37cba472020-10-26 14:15:34 -0700355 export OF_AGENT=\$(kubectl get pods -l app=ofagent -o name)
356 kubectl exec \$OF_AGENT -- apk update
357 kubectl exec \$OF_AGENT -- apk add tcpdump
358 kubectl exec \$OF_AGENT -- mv /usr/sbin/tcpdump /usr/bin/tcpdump
359 _TAG=ofagent-tcpdump kubectl exec \$OF_AGENT -- tcpdump -nei eth0 -w out.pcap&
Matteo Scandolo77fa78d2020-09-16 16:53:50 -0700360
Matteo Scandolo34d6a7a2020-10-20 09:29:58 -0700361 # Start the tcp-dump in radius
Matteo Scandolo37cba472020-10-26 14:15:34 -0700362 export RADIUS=\$(kubectl get pods -l app=radius -o name)
363 kubectl exec \$RADIUS -- apt-get update
364 kubectl exec \$RADIUS -- apt-get install -y tcpdump
365 _TAG=radius-tcpdump kubectl exec \$RADIUS -- tcpdump -w out.pcap&
Matteo Scandolo34d6a7a2020-10-20 09:29:58 -0700366
367 # Start the tcp-dump in ONOS
Matteo Scandolo37cba472020-10-26 14:15:34 -0700368 for i in \$(seq 0 \$ONOSES); do
369 INSTANCE="onos-onos-classic-\$i"
370 kubectl exec \$INSTANCE -- apt-get update
371 kubectl exec \$INSTANCE -- apt-get install -y tcpdump
372 kubectl exec \$INSTANCE -- mv /usr/sbin/tcpdump /usr/bin/tcpdump
373 _TAG=\$INSTANCE kubectl exec \$INSTANCE -- /usr/bin/tcpdump -nei eth0 port 1812 -w out.pcap&
Matteo Scandolo34d6a7a2020-10-20 09:29:58 -0700374 done
Matteo Scandoloc9dd44f2020-06-18 15:06:04 -0700375 fi
Matteo Scandolo37cba472020-10-26 14:15:34 -0700376 """
377 }
Matteo Scandolofbcbdb82020-05-06 15:41:32 -0700378 }
379 }
Matteo Scandolofcb75632021-04-06 16:25:19 -0700380 stage('Load MIB Template') {
381 when {
382 expression {
383 return params.withMibTemplate
384 }
385 }
386 steps {
387 sh """
388 # load MIB template
389 wget https://raw.githubusercontent.com/opencord/voltha-openonu-adapter-go/master/templates/BBSM-12345123451234512345-00000000000001-v1.json
390 cat BBSM-12345123451234512345-00000000000001-v1.json | kubectl exec -it \$(kubectl get pods |grep etcd | awk 'NR==1{print \$1}') -- etcdctl put service/voltha/omci_mibs/go_templates/BBSM/12345123451234512345/00000000000001
391 """
392 }
393 }
Matteo Scandolofbcbdb82020-05-06 15:41:32 -0700394 stage('Run Test') {
395 steps {
Matteo Scandoloa731f8f2020-05-11 10:27:26 -0700396 sh '''
397 mkdir -p $WORKSPACE/RobotLogs
398 cd $WORKSPACE/voltha-system-tests
399 make vst_venv
400 '''
401 sh '''
402 if [ ${withProfiling} = true ] ; then
Matteo Scandolof54c9b32020-08-27 07:58:27 -0700403 mkdir -p $LOG_FOLDER/pprof
Matteo Scandoloa731f8f2020-05-11 10:27:26 -0700404 echo $PATH
405 #Creating Python script for ONU Detection
406 cat << EOF > $WORKSPACE/pprof.sh
Matteo Scandolo3ddd3fb2020-05-12 14:31:14 -0700407timestamp() {
408 date +"%T"
409}
410
Matteo Scandoloa731f8f2020-05-11 10:27:26 -0700411i=0
412while [[ true ]]; do
413 ((i++))
Matteo Scandolo3ddd3fb2020-05-12 14:31:14 -0700414 ts=$(timestamp)
Matteo Scandolof54c9b32020-08-27 07:58:27 -0700415 go tool pprof -png http://127.0.0.1:6060/debug/pprof/heap > $LOG_FOLDER/pprof/rw-core-heap-\\$i-\\$ts.png
416 go tool pprof -png http://127.0.0.1:6060/debug/pprof/goroutine > $LOG_FOLDER/pprof/rw-core-goroutine-\\$i-\\$ts.png
417 curl -o $LOG_FOLDER/pprof/rw-core-profile-\\$i-\\$ts.pprof http://127.0.0.1:6060/debug/pprof/profile?seconds=10
418 go tool pprof -png $LOG_FOLDER/pprof/rw-core-profile-\\$i-\\$ts.pprof > $LOG_FOLDER/pprof/rw-core-profile-\\$i-\\$ts.png
Matteo Scandoloa731f8f2020-05-11 10:27:26 -0700419
Matteo Scandolof54c9b32020-08-27 07:58:27 -0700420 go tool pprof -png http://127.0.0.1:6061/debug/pprof/heap > $LOG_FOLDER/pprof/openolt-heap-\\$i-\\$ts.png
421 go tool pprof -png http://127.0.0.1:6061/debug/pprof/goroutine > $LOG_FOLDER/pprof/openolt-goroutine-\\$i-\\$ts.png
422 curl -o $LOG_FOLDER/pprof/openolt-profile-\\$i-\\$ts.pprof http://127.0.0.1:6061/debug/pprof/profile?seconds=10
423 go tool pprof -png $LOG_FOLDER/pprof/openolt-profile-\\$i-\\$ts.pprof > $LOG_FOLDER/pprof/openolt-profile-\\$i-\\$ts.png
Matteo Scandoloa731f8f2020-05-11 10:27:26 -0700424
Matteo Scandolof54c9b32020-08-27 07:58:27 -0700425 go tool pprof -png http://127.0.0.1:6062/debug/pprof/heap > $LOG_FOLDER/pprof/ofagent-heap-\\$i-\\$ts.png
426 go tool pprof -png http://127.0.0.1:6062/debug/pprof/goroutine > $LOG_FOLDER/pprof/ofagent-goroutine-\\$i-\\$ts.png
427 curl -o $LOG_FOLDER/pprof/ofagent-profile-\\$i-\\$ts.pprof http://127.0.0.1:6062/debug/pprof/profile?seconds=10
428 go tool pprof -png $LOG_FOLDER/pprof/ofagent-profile-\\$i-\\$ts.pprof > $LOG_FOLDER/pprof/ofagent-profile-\\$i-\\$ts.png
Matteo Scandolo731d12c2020-05-13 14:33:26 -0700429
Matteo Scandoloa731f8f2020-05-11 10:27:26 -0700430 sleep 10
431done
432EOF
433
434 _TAG="pprof"
435 _TAG=$_TAG bash $WORKSPACE/pprof.sh &
436 fi
437 '''
Matteo Scandolob7d60ba2020-11-06 09:46:11 -0800438 timeout(time: 15, unit: 'MINUTES') {
Matteo Scandolo9b0728b2020-05-11 08:25:57 -0700439 sh '''
Matteo Scandolofebf6512021-03-02 11:37:37 -0800440 ROBOT_PARAMS="--exitonfailure \
441 -v olt:${olts} \
Matteo Scandolo9b0728b2020-05-11 08:25:57 -0700442 -v pon:${pons} \
443 -v onu:${onus} \
Matteo Scandolofa49b8d2021-04-09 12:05:34 -0700444 -v ONOS_SSH_PORT:30115 \
445 -v ONOS_REST_PORT:30120 \
Matteo Scandolo9b0728b2020-05-11 08:25:57 -0700446 -v workflow:${workflow} \
447 -v withEapol:${withEapol} \
448 -v withDhcp:${withDhcp} \
449 -v withIgmp:${withIgmp} \
450 --noncritical non-critical \
Hardik Windlassc716a882021-02-03 15:21:07 +0000451 -e igmp -e teardown "
Matteo Scandolo0430f672020-05-07 11:50:26 -0700452
Matteo Scandolo9b0728b2020-05-11 08:25:57 -0700453 if [ ${withEapol} = false ] ; then
454 ROBOT_PARAMS+="-e authentication "
455 fi
Matteo Scandolo0430f672020-05-07 11:50:26 -0700456
Matteo Scandolo9b0728b2020-05-11 08:25:57 -0700457 if [ ${withDhcp} = false ] ; then
458 ROBOT_PARAMS+="-e dhcp "
459 fi
Matteo Scandolo0430f672020-05-07 11:50:26 -0700460
Matteo Scandolo9b0728b2020-05-11 08:25:57 -0700461 if [ ${provisionSubscribers} = false ] ; then
Matteo Scandolocd59fd02020-05-12 15:00:35 -0700462 # if we're not considering subscribers then we don't care about authentication and dhcp
Matteo Scandolo111c8932020-05-12 18:28:05 -0700463 ROBOT_PARAMS+="-e authentication -e provision -e flow-after -e dhcp "
Matteo Scandolo9b0728b2020-05-11 08:25:57 -0700464 fi
Matteo Scandolo0430f672020-05-07 11:50:26 -0700465
Matteo Scandolo9b0728b2020-05-11 08:25:57 -0700466 if [ ${withFlows} = false ] ; then
467 ROBOT_PARAMS+="-i setup -i activation "
468 fi
Matteo Scandolo0430f672020-05-07 11:50:26 -0700469
Matteo Scandoloa731f8f2020-05-11 10:27:26 -0700470 cd $WORKSPACE/voltha-system-tests
Matteo Scandolo9b0728b2020-05-11 08:25:57 -0700471 source ./vst_venv/bin/activate
472 robot -d $WORKSPACE/RobotLogs \
473 $ROBOT_PARAMS tests/scale/Voltha_Scale_Tests.robot
474 '''
475 }
Matteo Scandolofbcbdb82020-05-06 15:41:32 -0700476 }
477 }
Hardik Windlassc716a882021-02-03 15:21:07 +0000478 stage('Run Igmp Tests') {
479 environment {
480 ROBOT_LOGS_DIR="$WORKSPACE/RobotLogs/IgmpTests"
481 }
482 when {
483 expression {
484 return params.withIgmp
485 }
486 }
487 steps {
Andrea Campanella6fe1b032021-04-01 17:47:15 +0200488 sh returnStdout: false, script: """
Andrea Campanella08561cf2021-04-30 16:02:57 +0200489 # sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 log:set DEBUG org.onosproject.store.group.impl
Andrea Campanella6fe1b032021-04-01 17:47:15 +0200490 """
Hardik Windlassc716a882021-02-03 15:21:07 +0000491 sh '''
492 set +e
Andrea Campanella7ba63af2021-03-09 10:48:07 +0100493 mkdir -p $ROBOT_LOGS_DIR
Hardik Windlassc716a882021-02-03 15:21:07 +0000494 cd $WORKSPACE/voltha-system-tests
495 make vst_venv
496 '''
Matteo Scandolofebf6512021-03-02 11:37:37 -0800497 timeout(time: 11, unit: 'MINUTES') {
Hardik Windlassc716a882021-02-03 15:21:07 +0000498 sh '''
Matteo Scandolofebf6512021-03-02 11:37:37 -0800499 ROBOT_PARAMS="--exitonfailure \
500 -v olt:${olts} \
Hardik Windlassc716a882021-02-03 15:21:07 +0000501 -v pon:${pons} \
502 -v onu:${onus} \
503 -v workflow:${workflow} \
504 -v withEapol:${withEapol} \
505 -v withDhcp:${withDhcp} \
506 -v withIgmp:${withIgmp} \
Matteo Scandolofa49b8d2021-04-09 12:05:34 -0700507 -v ONOS_SSH_PORT:30115 \
508 -v ONOS_REST_PORT:30120 \
Hardik Windlassc716a882021-02-03 15:21:07 +0000509 --noncritical non-critical \
510 -i igmp \
511 -e setup -e activation -e flow-before \
512 -e authentication -e provision -e flow-after \
513 -e dhcp -e teardown "
514 cd $WORKSPACE/voltha-system-tests
515 source ./vst_venv/bin/activate
516 robot -d $ROBOT_LOGS_DIR \
517 $ROBOT_PARAMS tests/scale/Voltha_Scale_Tests.robot
518 '''
519 }
520 }
521 }
Matteo Scandolofbcbdb82020-05-06 15:41:32 -0700522 }
523 post {
524 always {
Matteo Scandolo157f66c2020-05-12 09:26:19 -0700525 // collect result, done in the "post" step so it's executed even in the
526 // event of a timeout in the tests
527 sh '''
Matteo Scandoloc9dd44f2020-06-18 15:06:04 -0700528
Matteo Scandolo7d6695c2020-08-25 13:13:16 -0700529 # stop the kail processes
530 list=($APPS_TO_LOG)
531 for app in "${list[@]}"
532 do
533 echo "Stopping logs for: ${app}"
534 _TAG="kail-$app"
535 P_IDS="$(ps e -ww -A | grep "_TAG=$_TAG" | grep -v grep | awk '{print $1}')"
536 if [ -n "$P_IDS" ]; then
537 echo $P_IDS
538 for P_ID in $P_IDS; do
539 kill -9 $P_ID
540 done
541 fi
542 done
543
Matteo Scandoloc9dd44f2020-06-18 15:06:04 -0700544 if [ ${withPcap} = true ] ; then
545 # stop ofAgent tcpdump
546 P_ID="\$(ps e -ww -A | grep "_TAG=ofagent-tcpdump" | grep -v grep | awk '{print \$1}')"
547 if [ -n "\$P_ID" ]; then
548 kill -9 \$P_ID
549 fi
550
Matteo Scandolo34d6a7a2020-10-20 09:29:58 -0700551 # stop radius tcpdump
552 P_ID="\$(ps e -ww -A | grep "_TAG=radius-tcpdump" | grep -v grep | awk '{print \$1}')"
553 if [ -n "\$P_ID" ]; then
554 kill -9 \$P_ID
555 fi
556
557 # stop onos tcpdump
558 LIMIT=$(($NUM_OF_ONOS - 1))
559 for i in $(seq 0 $LIMIT); do
560 INSTANCE="onos-onos-classic-$i"
561 P_ID="\$(ps e -ww -A | grep "_TAG=$INSTANCE" | grep -v grep | awk '{print \$1}')"
562 if [ -n "\$P_ID" ]; then
563 kill -9 \$P_ID
564 fi
565 done
566
Matteo Scandoloc9dd44f2020-06-18 15:06:04 -0700567 # copy the file
Matteo Scandoloa7600f12020-09-21 16:09:27 -0700568 export OF_AGENT=$(kubectl get pods -l app=ofagent | awk 'NR==2{print $1}') || true
569 kubectl cp $OF_AGENT:out.pcap $LOG_FOLDER/ofagent.pcap || true
Matteo Scandolo77fa78d2020-09-16 16:53:50 -0700570
Andrea Campanella190854a2020-10-20 14:30:42 +0200571 export RADIUS=$(kubectl get pods -l app=radius | awk 'NR==2{print $1}') || true
572 kubectl cp $RADIUS:out.pcap $LOG_FOLDER/radius.pcap || true
Matteo Scandolo34d6a7a2020-10-20 09:29:58 -0700573
574 LIMIT=$(($NUM_OF_ONOS - 1))
575 for i in $(seq 0 $LIMIT); do
576 INSTANCE="onos-onos-classic-$i"
577 kubectl cp $INSTANCE:out.pcap $LOG_FOLDER/$INSTANCE.pcap || true
578 done
Matteo Scandoloc9dd44f2020-06-18 15:06:04 -0700579 fi
580
Matteo Scandolo157f66c2020-05-12 09:26:19 -0700581 cd voltha-system-tests
582 source ./vst_venv/bin/activate
Matteo Scandolo7d6695c2020-08-25 13:13:16 -0700583 python tests/scale/collect-result.py -r $WORKSPACE/RobotLogs/output.xml -p $WORKSPACE/plots > $WORKSPACE/execution-time.txt || true
Matteo Scandolo157f66c2020-05-12 09:26:19 -0700584 cat $WORKSPACE/execution-time.txt
585 '''
Matteo Scandoloa731f8f2020-05-11 10:27:26 -0700586 sh '''
587 if [ ${withProfiling} = true ] ; then
588 _TAG="pprof"
589 P_IDS="$(ps e -ww -A | grep "_TAG=$_TAG" | grep -v grep | awk '{print $1}')"
590 if [ -n "$P_IDS" ]; then
591 echo $P_IDS
592 for P_ID in $P_IDS; do
593 kill -9 $P_ID
594 done
595 fi
596 fi
597 '''
Matteo Scandolofbcbdb82020-05-06 15:41:32 -0700598 plot([
599 csvFileName: 'scale-test.csv',
600 csvSeries: [
Matteo Scandolo272aed42020-05-08 15:05:57 -0700601 [file: 'plots/plot-voltha-onus.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
602 [file: 'plots/plot-onos-ports.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
603 [file: 'plots/plot-voltha-flows-before.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
Matteo Scandolo64966762020-05-13 11:51:38 -0700604 [file: 'plots/plot-voltha-openolt-flows-before.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
Matteo Scandolo272aed42020-05-08 15:05:57 -0700605 [file: 'plots/plot-onos-flows-before.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
606 [file: 'plots/plot-onos-auth.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
607 [file: 'plots/plot-voltha-flows-after.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
Matteo Scandolo64966762020-05-13 11:51:38 -0700608 [file: 'plots/plot-voltha-openolt-flows-after.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
Matteo Scandolo272aed42020-05-08 15:05:57 -0700609 [file: 'plots/plot-onos-flows-after.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
610 [file: 'plots/plot-onos-dhcp.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
Matteo Scandolofbcbdb82020-05-06 15:41:32 -0700611 ],
612 group: 'Voltha-Scale-Numbers', numBuilds: '20', style: 'line', title: "Scale Test (OLTs: ${olts}, PONs: ${pons}, ONUs: ${onus})", yaxis: 'Time (s)', useDescr: true
613 ])
614 step([$class: 'RobotPublisher',
615 disableArchiveOutput: false,
Hardik Windlassc716a882021-02-03 15:21:07 +0000616 logFileName: '**/log*.html',
Matteo Scandolofbcbdb82020-05-06 15:41:32 -0700617 otherFiles: '',
Hardik Windlassc716a882021-02-03 15:21:07 +0000618 outputFileName: '**/output*.xml',
619 outputPath: 'RobotLogs',
Matteo Scandolofbcbdb82020-05-06 15:41:32 -0700620 passThreshold: 100,
Hardik Windlassc716a882021-02-03 15:21:07 +0000621 reportFileName: '**/report*.html',
Matteo Scandolofbcbdb82020-05-06 15:41:32 -0700622 unstableThreshold: 0]);
Matteo Scandolo502644b2020-05-18 08:56:18 -0700623 // get all the logs from kubernetes PODs
Matteo Scandoloede5abd2020-05-22 10:57:10 -0700624 sh returnStdout: false, script: '''
Matteo Scandoloede5abd2020-05-22 10:57:10 -0700625
Matteo Scandoloc495b362020-07-17 10:44:12 -0700626 # store information on running charts
Matteo Scandolo9214ebd2020-07-30 17:57:10 -0700627 helm ls > $LOG_FOLDER/helm-list.txt || true
Matteo Scandoloc495b362020-07-17 10:44:12 -0700628
Matteo Scandoloede5abd2020-05-22 10:57:10 -0700629 # store information on the running pods
Matteo Scandolo9214ebd2020-07-30 17:57:10 -0700630 kubectl get pods -o wide > $LOG_FOLDER/pods.txt || true
631 kubectl get pods --all-namespaces -o jsonpath="{range .items[*].status.containerStatuses[*]}{.image}{'\\n'}" | sort | uniq | tee $LOG_FOLDER/pod-images.txt || true
632 kubectl get pods --all-namespaces -o jsonpath="{range .items[*].status.containerStatuses[*]}{.imageID}{'\\n'}" | sort | uniq | tee $LOG_FOLDER/pod-imagesId.txt || true
Matteo Scandoloede5abd2020-05-22 10:57:10 -0700633
Matteo Scandolo32da27d2020-05-29 10:38:31 -0700634 # copy the ONOS logs directly from the container to avoid the color codes
Matteo Scandolodbda3272021-03-04 14:50:07 -0800635 printf '%s\n' $(kubectl get pods -l app=onos-classic -o=jsonpath="{.items[*]['metadata.name']}") | xargs --no-run-if-empty -I# bash -c "kubectl cp #:${karafHome}/data/log/karaf.log $LOG_FOLDER/#.log" || true
Matteo Scandoloa2f07fc2020-10-08 18:30:54 -0700636
Matteo Scandolo064efbc2021-03-29 17:24:34 -0700637 # get ONOS cfg from the 3 nodes
Andrea Campanella55f0f0e2021-04-15 18:50:54 +0200638 # kubectl exec -t voltha-infra-onos-classic-0 -- sh /root/onos/apache-karaf-4.2.9/bin/client cfg get > ~/voltha-infra-onos-classic-0-cfg.txt || true
639 # kubectl exec -t voltha-infra-onos-classic-1 -- sh /root/onos/apache-karaf-4.2.9/bin/client cfg get > ~/voltha-infra-onos-classic-1-cfg.txt || true
640 # kubectl exec -t voltha-infra-onos-classic-2 -- sh /root/onos/apache-karaf-4.2.9/bin/client cfg get > ~/voltha-infra-onos-classic-2-cfg.txt || true
Matteo Scandolo064efbc2021-03-29 17:24:34 -0700641
Andrea Campanella55f0f0e2021-04-15 18:50:54 +0200642 # kubectl exec -t voltha-infra-onos-classic-0 -- sh /root/onos/apache-karaf-4.2.9/bin/client obj-next-ids > ~/voltha-infra-onos-classic-0-next-objs.txt || true
643 # kubectl exec -t voltha-infra-onos-classic-1 -- sh /root/onos/apache-karaf-4.2.9/bin/client obj-next-ids > ~/voltha-infra-onos-classic-1-next-objs.txt || true
644 # kubectl exec -t voltha-infra-onos-classic-2 -- sh /root/onos/apache-karaf-4.2.9/bin/client obj-next-ids > ~/voltha-infra-onos-classic-2-next-objs.txt || true
Matteo Scandolo064efbc2021-03-29 17:24:34 -0700645
Matteo Scandoloa2f07fc2020-10-08 18:30:54 -0700646 # get radius logs out of the container
Matteo Scandolob2de2032021-02-26 10:04:02 -0800647 kubectl cp $(kubectl get pods -l app=radius --no-headers | awk '{print $1}'):/var/log/freeradius/radius.log $LOG_FOLDER/radius.log || true
Matteo Scandolob70b3e02020-05-07 11:50:26 -0700648 '''
Matteo Scandolo27553c02020-07-16 17:21:57 -0700649 // dump all the BBSim(s) ONU information
Matteo Scandolob70b3e02020-05-07 11:50:26 -0700650 sh '''
651 BBSIM_IDS=$(kubectl get pods | grep bbsim | grep -v server | awk '{print $1}')
652 IDS=($BBSIM_IDS)
653
654 for bbsim in "${IDS[@]}"
655 do
Matteo Scandolo900e5112020-09-08 10:16:31 -0700656 kubectl exec -t $bbsim -- bbsimctl onu list > $LOG_FOLDER/$bbsim-device-list.txt || true
657 kubectl exec -t $bbsim -- bbsimctl service list > $LOG_FOLDER/$bbsim-service-list.txt || true
Matteo Scandolo6b66b582021-03-10 14:33:47 -0800658 kubectl exec -t $bbsim -- bbsimctl olt resources GEM_PORT > $LOG_FOLDER/$bbsim-flows-gem-ports.txt || true
659 kubectl exec -t $bbsim -- bbsimctl olt resources ALLOC_ID > $LOG_FOLDER/$bbsim-flows-alloc-ids.txt || true
660 kubectl exec -t $bbsim -- bbsimctl olt pons > $LOG_FOLDER/$bbsim-pon-resources.txt || true
Matteo Scandolob70b3e02020-05-07 11:50:26 -0700661 done
662 '''
Matteo Scandolodbda3272021-03-04 14:50:07 -0800663 script {
664 // first make sure the port-forward is still running,
665 // sometimes Jenkins kills it relardless of the JENKINS_NODE_COOKIE=dontKillMe
666 def running = sh (
667 script: 'ps aux | grep port-forw | grep -E "onos|voltha" | grep -v grep | wc -l',
668 returnStdout: true
669 ).trim()
670 // if any of the voltha-api, onos-rest, onos-ssh port-forwards are not there
671 // kill all and restart
672 if (running != "3") {
673 start_port_forward(olts)
674 }
675 }
Matteo Scandolo32da27d2020-05-29 10:38:31 -0700676 // get ONOS debug infos
Matteo Scandolob70b3e02020-05-07 11:50:26 -0700677 sh '''
Matteo Scandolobbd8f902020-09-24 08:40:58 -0700678
Matteo Scandolofa49b8d2021-04-09 12:05:34 -0700679 sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 apps -a -s > $LOG_FOLDER/onos-apps.txt
680 sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 nodes > $LOG_FOLDER/onos-nodes.txt
681 sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 masters > $LOG_FOLDER/onos-masters.txt
682 sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 roles > $LOG_FOLDER/onos-roles.txt
683 sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 cfg get > $LOG_FOLDER/onos-cfg.txt
684 sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 netcfg > $LOG_FOLDER/onos-netcfg.txt
Matteo Scandolodbda3272021-03-04 14:50:07 -0800685
Matteo Scandolofa49b8d2021-04-09 12:05:34 -0700686 sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 ports > $LOG_FOLDER/onos-ports-list.txt
687 sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 hosts > $LOG_FOLDER/onos-hosts-list.txt
Matteo Scandolo32da27d2020-05-29 10:38:31 -0700688
689 if [ ${withFlows} = true ] ; then
Matteo Scandolofa49b8d2021-04-09 12:05:34 -0700690 sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 volt-olts > $LOG_FOLDER/onos-olt-list.txt
691 sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 flows -s > $LOG_FOLDER/onos-flows-list.txt
692 sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 meters > $LOG_FOLDER/onos-meters-list.txt
Matteo Scandolo32da27d2020-05-29 10:38:31 -0700693 fi
694
Matteo Scandolo0bf7e9e2020-05-29 18:17:50 -0700695 if [ ${provisionSubscribers} = true ]; then
Matteo Scandolofa49b8d2021-04-09 12:05:34 -0700696 sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 volt-programmed-subscribers > $LOG_FOLDER/onos-programmed-subscribers.txt
697 sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 volt-programmed-meters > $LOG_FOLDER/onos-programmed-meters.txt
698 sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 volt-bpmeter-mappings > $LOG_FOLDER/onos-bpmeter-mappings.txt
699 sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 volt-failed-subscribers > $LOG_FOLDER/onos-failed-subscribers.txt
Matteo Scandolo32da27d2020-05-29 10:38:31 -0700700 fi
701
Matteo Scandolo172c9ca2020-06-10 12:23:48 -0700702 if [ ${withEapol} = true ] ; then
Matteo Scandolofa49b8d2021-04-09 12:05:34 -0700703 sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 aaa-users > $LOG_FOLDER/onos-aaa-users.txt
704 sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 aaa-statistics > $LOG_FOLDER/onos-aaa-statistics.txt
Matteo Scandolo32da27d2020-05-29 10:38:31 -0700705 fi
706
Matteo Scandolo172c9ca2020-06-10 12:23:48 -0700707 if [ ${withDhcp} = true ] ; then
Matteo Scandolofa49b8d2021-04-09 12:05:34 -0700708 sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 dhcpl2relay-allocations > $LOG_FOLDER/onos-dhcp-allocations.txt
Matteo Scandolofebf6512021-03-02 11:37:37 -0800709 fi
710
711 if [ ${withIgmp} = true ] ; then
Matteo Scandolofa49b8d2021-04-09 12:05:34 -0700712 sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 mcast-host-routes > $LOG_FOLDER/onos-mcast-host-routes.txt
713 sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 mcast-host-show > $LOG_FOLDER/onos-mcast-host-show.txt
714 sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 groups > $LOG_FOLDER/onos-groups.txt
Matteo Scandolo32da27d2020-05-29 10:38:31 -0700715 fi
Matteo Scandolob70b3e02020-05-07 11:50:26 -0700716 '''
Shrey Baidcf652c82020-05-21 13:35:04 +0530717 // collect etcd metrics
718 sh '''
Matteo Scandolo77fa78d2020-09-16 16:53:50 -0700719 mkdir -p $WORKSPACE/etcd-metrics
Matteo Scandolo9214ebd2020-07-30 17:57:10 -0700720 curl -s -X GET -G http://10.90.0.101:31301/api/v1/query --data-urlencode 'query=etcd_debugging_mvcc_keys_total' | jq '.data' > $WORKSPACE/etcd-metrics/etcd-key-count.json || true
721 curl -s -X GET -G http://10.90.0.101:31301/api/v1/query --data-urlencode 'query=grpc_server_handled_total{grpc_service="etcdserverpb.KV"}' | jq '.data' > $WORKSPACE/etcd-metrics/etcd-rpc-count.json || true
722 curl -s -X GET -G http://10.90.0.101:31301/api/v1/query --data-urlencode 'query=etcd_debugging_mvcc_db_total_size_in_bytes' | jq '.data' > $WORKSPACE/etcd-metrics/etcd-db-size.json || true
723 curl -s -X GET -G http://10.90.0.101:31301/api/v1/query --data-urlencode 'query=etcd_disk_backend_commit_duration_seconds_sum' | jq '.data' > $WORKSPACE/etcd-metrics/etcd-backend-write-time.json || true
Andrea Campanella31fd31f2020-11-20 19:02:58 +0100724 curl -s -X GET -G http://10.90.0.101:31301/api/v1/query --data-urlencode 'query=etcd_disk_backend_commit_duration_seconds_sum' | jq '.data' > $WORKSPACE/etcd-metrics/etcd-backend-write-time-sum.json || true
725 curl -s -X GET -G http://10.90.0.101:31301/api/v1/query --data-urlencode 'query=etcd_disk_backend_commit_duration_seconds_bucket' | jq '.data' > $WORKSPACE/etcd-metrics/etcd-backend-write-time-bucket.json || true
726 curl -s -X GET -G http://10.90.0.101:31301/api/v1/query --data-urlencode 'query=etcd_disk_wal_fsync_duration_seconds_bucket' | jq '.data' > $WORKSPACE/etcd-metrics/etcd-wal-fsync-time-bucket.json || true
Andrea Campanella23a1c322020-11-25 17:11:55 +0100727 curl -s -X GET -G http://10.90.0.101:31301/api/v1/query --data-urlencode 'query=etcd_network_peer_round_trip_time_seconds_bucket' | jq '.data' > $WORKSPACE/etcd-metrics/etcd-network-peer-round-trip-time-seconds.json || true
728
Shrey Baidcf652c82020-05-21 13:35:04 +0530729 '''
Matteo Scandolo32da27d2020-05-29 10:38:31 -0700730 // get VOLTHA debug infos
Matteo Scandolo502644b2020-05-18 08:56:18 -0700731 script {
732 try {
733 sh '''
Matteo Scandolof54c9b32020-08-27 07:58:27 -0700734 voltctl -m 8MB device list -o json > $LOG_FOLDER/device-list.json || true
735 python -m json.tool $LOG_FOLDER/device-list.json > $LOG_FOLDER/voltha-devices-list.json || true
736 rm $LOG_FOLDER/device-list.json || true
737 voltctl -m 8MB device list > $LOG_FOLDER/voltha-devices-list.txt || true
Matteo Scandolo32da27d2020-05-29 10:38:31 -0700738
Matteo Scandolobe823242020-11-20 13:48:13 -0800739 printf '%s\n' $(voltctl -m 8MB device list | grep olt | awk '{print $1}') | xargs --no-run-if-empty -I# bash -c "voltctl -m 8MB device flows # > $LOG_FOLDER/voltha-device-flows-#.txt" || true
740 printf '%s\n' $(voltctl -m 8MB device list | grep olt | awk '{print $1}') | xargs --no-run-if-empty -I# bash -c "voltctl -m 8MB device port list --format 'table{{.PortNo}}\t{{.Label}}\t{{.Type}}\t{{.AdminState}}\t{{.OperStatus}}' # > $LOG_FOLDER/voltha-device-ports-#.txt" || true
Matteo Scandolo32da27d2020-05-29 10:38:31 -0700741
Matteo Scandolobe823242020-11-20 13:48:13 -0800742 printf '%s\n' $(voltctl -m 8MB logicaldevice list -q) | xargs --no-run-if-empty -I# bash -c "voltctl -m 8MB logicaldevice flows # > $LOG_FOLDER/voltha-logicaldevice-flows-#.txt" || true
743 printf '%s\n' $(voltctl -m 8MB logicaldevice list -q) | xargs --no-run-if-empty -I# bash -c "voltctl -m 8MB logicaldevice port list # > $LOG_FOLDER/voltha-logicaldevice-ports-#.txt" || true
Matteo Scandolo502644b2020-05-18 08:56:18 -0700744 '''
745 } catch(e) {
746 sh '''
747 echo "Can't get device list from voltclt"
748 '''
749 }
750 }
Matteo Scandolo27553c02020-07-16 17:21:57 -0700751 // get cpu usage by container
752 sh '''
Matteo Scandolo7d6695c2020-08-25 13:13:16 -0700753 if [ ${withMonitoring} = true ] ; then
754 cd $WORKSPACE/voltha-system-tests
755 source ./vst_venv/bin/activate
756 sleep 60 # we have to wait for prometheus to collect all the information
757 python tests/scale/sizing.py -o $WORKSPACE/plots || true
758 fi
Matteo Scandolo27553c02020-07-16 17:21:57 -0700759 '''
Matteo Scandolo7cf2fc22021-03-01 18:33:42 -0800760 archiveArtifacts artifacts: 'execution-time.txt,logs/*,logs/pprof/*,RobotLogs/**/*,plots/*,etcd-metrics/*'
Matteo Scandolofbcbdb82020-05-06 15:41:32 -0700761 }
762 }
763}
Matteo Scandolodbda3272021-03-04 14:50:07 -0800764
765def start_port_forward(olts) {
766 sh """
Matteo Scandolodbda3272021-03-04 14:50:07 -0800767 bbsimRestPortFwd=50071
768 for i in {0..${olts.toInteger() - 1}}; do
769 daemonize -E JENKINS_NODE_COOKIE="dontKillMe" /usr/local/bin/kubectl port-forward --address 0.0.0.0 -n default svc/bbsim\${i} \${bbsimRestPortFwd}:50071
770 ((bbsimRestPortFwd++))
771 done
772 """
773}