Gitiles
Code Review Sign In
gerrit.opencord.org / ci-management / 842cb5dc707ff922a3ffe1b71b17c4d9b37c9025 / . / jjb / pipeline / voltha / voltha-2.8 / physical-build.groovy
blob: 59528284646107267c5ee8522b79f18c74ff4a1f [file] [log] [blame]
Hardik Windlass6d9a82e2021-07-08 16:23:21 +0000[diff] [blame]1// Copyright 2017-present Open Networking Foundation
2//
3// Licensed under the Apache License, Version 2.0 (the "License");
4// you may not use this file except in compliance with the License.
5// You may obtain a copy of the License at
6//
7// http://www.apache.org/licenses/LICENSE-2.0
8//
9// Unless required by applicable law or agreed to in writing, software
10// distributed under the License is distributed on an "AS IS" BASIS,
11// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
12// See the License for the specific language governing permissions and
13// limitations under the License.
14
15// used to deploy VOLTHA and configure ONOS physical PODs
16
17// NOTE we are importing the library even if it's global so that it's
18// easier to change the keywords during a replay
19library identifier: 'cord-jenkins-libraries@master',
20 retriever: modernSCM([
21 $class: 'GitSCMSource',
22 remote: 'https://gerrit.opencord.org/ci-management.git'
23])
24
25def infraNamespace = "infra"
26def volthaNamespace = "voltha"
27
Andrea Campanella20361592021-08-26 18:45:28 +0200[diff] [blame]28def deploy_custom_oltAdapterChart(namespace, name, chart, extraHelmFlags) {
29 sh """
30 helm install --create-namespace --set defaults.image_pullPolicy=Always --namespace ${namespace} ${extraHelmFlags} ${name} ${chart}
31 """
32}
33
Hardik Windlass6d9a82e2021-07-08 16:23:21 +0000[diff] [blame]34pipeline {
35
36 /* no label, executor is determined by JJB */
37 agent {
38 label "${params.buildNode}"
39 }
40 options {
41 timeout(time: 35, unit: 'MINUTES')
42 }
43 environment {
44 PATH="$PATH:$WORKSPACE/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/snap/bin"
45 KUBECONFIG="$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf"
46 }
47
48 stages{
49 stage('Download Code') {
50 steps {
51 getVolthaCode([
52 branch: "${branch}",
53 volthaSystemTestsChange: "${volthaSystemTestsChange}",
54 volthaHelmChartsChange: "${volthaHelmChartsChange}",
55 ])
56 }
57 }
58 stage ("Parse deployment configuration file") {
59 steps {
60 sh returnStdout: true, script: "rm -rf ${configBaseDir}"
Hardik Windlass6f854a12021-07-12 13:20:21 +0000[diff] [blame]61 sh returnStdout: true, script: "git clone -b ${branch} ${cordRepoUrl}/${configBaseDir}"
Hardik Windlass6d9a82e2021-07-08 16:23:21 +0000[diff] [blame]62 script {
63 if ( params.workFlow == "DT" ) {
64 deployment_config = readYaml file: "${configBaseDir}/${configDeploymentDir}/${configFileName}-DT.yaml"
65 }
66 else if ( params.workFlow == "TT" )
67 {
68 deployment_config = readYaml file: "${configBaseDir}/${configDeploymentDir}/${configFileName}-TT.yaml"
69 }
70 else
71 {
72 deployment_config = readYaml file: "${configBaseDir}/${configDeploymentDir}/${configFileName}.yaml"
73 }
74 }
75 }
76 }
77 stage('Clean up') {
78 steps {
79 timeout(15) {
80 script {
81 helmTeardown(["default", infraNamespace, volthaNamespace])
82 }
83 timeout(1) {
84 sh returnStdout: false, script: '''
85 # remove orphaned port-forward from different namespaces
86 ps aux | grep port-forw | grep -v grep | awk '{print $2}' | xargs --no-run-if-empty kill -9 || true
87 '''
88 }
89 }
90 }
91 }
92 stage('Install Voltha') {
93 steps {
94 timeout(20) {
Hardik Windlass9658cd22021-10-25 11:13:25 +0000[diff] [blame]95 installVoltctl("$branch")
Hardik Windlass6d9a82e2021-07-08 16:23:21 +0000[diff] [blame]96 script {
97 // if we're downloading a voltha-helm-charts patch, then install from a local copy of the charts
98 def localCharts = false
99 if (volthaHelmChartsChange != "" || branch != "master") {
100 localCharts = true
101 }
102
103 // should the config file be suffixed with the workflow? see "deployment_config"
104 def localHelmFlags = "-f $WORKSPACE/${configBaseDir}/${configKubernetesDir}/voltha/${configFileName}.yml --set global.log_level=${logLevel} "
105
106 if (workFlow.toLowerCase() == "dt") {
107 localHelmFlags += " --set radius.enabled=false "
108 }
109 if (workFlow.toLowerCase() == "tt") {
110 localHelmFlags += " --set radius.enabled=false --set global.incremental_evto_update=true "
111 if (enableMultiUni.toBoolean()) {
112 localHelmFlags += " --set voltha-adapter-openonu.adapter_open_onu.uni_port_mask=${uniPortMask} "
113 }
114 }
115
116 // NOTE temporary workaround expose ONOS node ports (pod-config needs to be updated to contain these values)
117 // and to connect the ofagent to all instances of ONOS
118 localHelmFlags = localHelmFlags + " --set onos-classic.onosSshPort=30115 " +
119 "--set onos-classic.onosApiPort=30120 " +
120 "--set onos-classic.onosOfPort=31653 " +
121 "--set onos-classic.individualOpenFlowNodePorts=true " +
122 "--set voltha.onos_classic.replicas=${params.NumOfOnos}"
123
124 if (bbsimReplicas.toInteger() != 0) {
125 localHelmFlags = localHelmFlags + " --set onu=${onuNumber},pon=${ponNumber} "
126 }
127
128 // adding user specified helm flags at the end so they'll have priority over everything else
129 localHelmFlags = localHelmFlags + " ${extraHelmFlags}"
130
Andrea Campanella365ea1e2021-09-28 10:50:01 +0200[diff] [blame]131 def numberOfAdaptersToWait = 2
132
Andrea Campanellace8aa762021-08-27 09:32:22 +0200[diff] [blame]133 if(openoltAdapterChart != "onf/voltha-adapter-openolt") {
Andrea Campanella20361592021-08-26 18:45:28 +0200[diff] [blame]134 localHelmFlags = localHelmFlags + " --set voltha-adapter-openolt.enabled=false"
Andrea Campanella365ea1e2021-09-28 10:50:01 +0200[diff] [blame]135 // We skip waiting for adapters in the volthaDeploy step because it's already waiting for
136 // both of them after the deployment of the custom olt adapter. See line 156.
137 numberOfAdaptersToWait = 0
Andrea Campanella20361592021-08-26 18:45:28 +0200[diff] [blame]138 }
139
Hardik Windlass6d9a82e2021-07-08 16:23:21 +0000[diff] [blame]140 volthaDeploy([
141 workflow: workFlow.toLowerCase(),
142 extraHelmFlags: localHelmFlags,
143 localCharts: localCharts,
144 kubeconfig: "$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf",
145 onosReplica: params.NumOfOnos,
146 atomixReplica: params.NumOfAtomix,
147 kafkaReplica: params.NumOfKafka,
148 etcdReplica: params.NumOfEtcd,
149 bbsimReplica: bbsimReplicas.toInteger(),
Andrea Campanella365ea1e2021-09-28 10:50:01 +0200[diff] [blame]150 adaptersToWait: numberOfAdaptersToWait,
Hardik Windlass6d9a82e2021-07-08 16:23:21 +0000[diff] [blame]151 ])
Andrea Campanella20361592021-08-26 18:45:28 +0200[diff] [blame]152
Andrea Campanella365ea1e2021-09-28 10:50:01 +0200[diff] [blame]153 if(openoltAdapterChart != "onf/voltha-adapter-openolt"){
154 extraHelmFlags = extraHelmFlags + " --set global.log_level=${logLevel}"
155 deploy_custom_oltAdapterChart(volthaNamespace, oltAdapterReleaseName, openoltAdapterChart, extraHelmFlags)
156 waitForAdapters([
157 adaptersToWait: 2
158 ])
159 }
Hardik Windlass6d9a82e2021-07-08 16:23:21 +0000[diff] [blame]160 }
161 sh """
162 JENKINS_NODE_COOKIE="dontKillMe" _TAG="voltha-api" bash -c "while true; do kubectl port-forward --address 0.0.0.0 -n ${volthaNamespace} svc/voltha-voltha-api 55555:55555; done"&
163 JENKINS_NODE_COOKIE="dontKillMe" _TAG="etcd" bash -c "while true; do kubectl port-forward --address 0.0.0.0 -n ${infraNamespace} svc/voltha-infra-etcd ${params.VolthaEtcdPort}:2379; done"&
164 JENKINS_NODE_COOKIE="dontKillMe" _TAG="kafka" bash -c "while true; do kubectl port-forward --address 0.0.0.0 -n ${infraNamespace} svc/voltha-infra-kafka 9092:9092; done"&
165 ps aux | grep port-forward
166 """
167 getPodsInfo("$WORKSPACE")
168 }
169 }
170 }
171 stage('Push Tech-Profile') {
172 steps {
173 script {
174 if ( params.configurePod && params.profile != "Default" ) {
175 for(int i=0; i < deployment_config.olts.size(); i++) {
176 def tech_prof_directory = "XGS-PON"
Girish Gowdraa0618412021-07-14 20:10:39 -0700[diff] [blame]177 if (deployment_config.olts[i].containsKey("board_technology")){
178 tech_prof_directory = deployment_config.olts[i]["board_technology"]
Hardik Windlass6d9a82e2021-07-08 16:23:21 +0000[diff] [blame]179 }
180 timeout(1) {
181 sh returnStatus: true, script: """
182 export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
183 etcd_container=\$(kubectl get pods -n ${infraNamespace} | grep etcd | awk 'NR==1{print \$1}')
184 if [[ "${workFlow}" == "TT" ]]; then
185 if [[ "${params.enableMultiUni}" == "true" ]]; then
186 kubectl cp -n ${infraNamespace} $WORKSPACE/voltha-system-tests/tests/data/TechProfile-TT-multi-uni-HSIA.json \$etcd_container:/tmp/hsia.json
187 kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/hsia.json | ETCDCTL_API=3 etcdctl put service/voltha/technology_profiles/${tech_prof_directory}/64'
188 kubectl cp -n ${infraNamespace} $WORKSPACE/voltha-system-tests/tests/data/TechProfile-TT-multi-uni-VoIP.json \$etcd_container:/tmp/voip.json
189 kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/voip.json | ETCDCTL_API=3 etcdctl put service/voltha/technology_profiles/${tech_prof_directory}/65'
190 kubectl cp -n ${infraNamespace} $WORKSPACE/voltha-system-tests/tests/data/TechProfile-TT-multi-uni-MCAST-AdditionalBW-None.json \$etcd_container:/tmp/mcast_additionalBW_none.json
191 kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/mcast_additionalBW_none.json | ETCDCTL_API=3 etcdctl put service/voltha/technology_profiles/${tech_prof_directory}/66'
192 kubectl cp -n ${infraNamespace} $WORKSPACE/voltha-system-tests/tests/data/TechProfile-TT-multi-uni-MCAST-AdditionalBW-NA.json \$etcd_container:/tmp/mcast_additionalBW_na.json
193 kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/mcast_additionalBW_na.json | ETCDCTL_API=3 etcdctl put service/voltha/technology_profiles/${tech_prof_directory}/67'
194 else
195 kubectl cp -n ${infraNamespace} $WORKSPACE/voltha-system-tests/tests/data/TechProfile-TT-HSIA.json \$etcd_container:/tmp/hsia.json
196 kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/hsia.json | ETCDCTL_API=3 etcdctl put service/voltha/technology_profiles/${tech_prof_directory}/64'
197 kubectl cp -n ${infraNamespace} $WORKSPACE/voltha-system-tests/tests/data/TechProfile-TT-VoIP.json \$etcd_container:/tmp/voip.json
198 kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/voip.json | ETCDCTL_API=3 etcdctl put service/voltha/technology_profiles/${tech_prof_directory}/65'
199 kubectl cp -n ${infraNamespace} $WORKSPACE/voltha-system-tests/tests/data/TechProfile-TT-MCAST-AdditionalBW-None.json \$etcd_container:/tmp/mcast_additionalBW_none.json
200 kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/mcast_additionalBW_none.json | ETCDCTL_API=3 etcdctl put service/voltha/technology_profiles/${tech_prof_directory}/66'
201 kubectl cp -n ${infraNamespace} $WORKSPACE/voltha-system-tests/tests/data/TechProfile-TT-MCAST-AdditionalBW-NA.json \$etcd_container:/tmp/mcast_additionalBW_na.json
202 kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/mcast_additionalBW_na.json | ETCDCTL_API=3 etcdctl put service/voltha/technology_profiles/${tech_prof_directory}/67'
203 fi
204 else
205 kubectl cp -n ${infraNamespace} $WORKSPACE/voltha-system-tests/tests/data/TechProfile-${profile}.json \$etcd_container:/tmp/flexpod.json
206 kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/flexpod.json | ETCDCTL_API=3 etcdctl put service/voltha/technology_profiles/${tech_prof_directory}/64'
207 fi
208 """
209 }
210 timeout(1) {
211 sh returnStatus: true, script: """
212 export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
213 etcd_container=\$(kubectl get pods -n ${infraNamespace} | grep etcd | awk 'NR==1{print \$1}')
214 kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'ETCDCTL_API=3 etcdctl get --prefix service/voltha/technology_profiles/${tech_prof_directory}/64'
215 """
216 }
217 }
218 }
219 }
220 }
221 }
222 stage('Push MIB templates') {
223 steps {
224 sh """
225 export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
226 etcd_container=\$(kubectl get pods -n ${infraNamespace} | grep etcd | awk 'NR==1{print \$1}')
227 kubectl cp -n ${infraNamespace} $WORKSPACE/voltha-system-tests/tests/data/MIB_Alpha.json \$etcd_container:/tmp/MIB_Alpha.json
228 kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/MIB_Alpha.json | ETCDCTL_API=3 etcdctl put service/voltha/omci_mibs/go_templates/BRCM/BVM4K00BRA0915-0083/5023_020O02414'
229 kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/MIB_Alpha.json | ETCDCTL_API=3 etcdctl put service/voltha/omci_mibs/templates/BRCM/BVM4K00BRA0915-0083/5023_020O02414'
230 kubectl cp -n ${infraNamespace} $WORKSPACE/voltha-system-tests/tests/data/MIB_Scom.json \$etcd_container:/tmp/MIB_Scom.json
231 kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/MIB_Scom.json | ETCDCTL_API=3 etcdctl put service/voltha/omci_mibs/go_templates/SCOM/Glasfaser-Modem/090140.1.0.304'
232 kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/MIB_Scom.json | ETCDCTL_API=3 etcdctl put service/voltha/omci_mibs/templates/SCOM/Glasfaser-Modem/090140.1.0.304'
233 """
234 }
235 }
236 stage('Push Sadis-config') {
237 steps {
238 timeout(1) {
239 sh returnStatus: true, script: """
240 if [[ "${workFlow}" == "DT" ]]; then
241 curl -sSL --user karaf:karaf -X POST -H Content-Type:application/json http://${deployment_config.nodes[0].ip}:30120/onos/v1/network/configuration --data @$WORKSPACE/voltha-system-tests/tests/data/${configFileName}-sadis-DT.json
242 elif [[ "${workFlow}" == "TT" ]]; then
243 curl -sSL --user karaf:karaf -X POST -H Content-Type:application/json http://${deployment_config.nodes[0].ip}:30120/onos/v1/network/configuration --data @$WORKSPACE/voltha-system-tests/tests/data/${configFileName}-sadis-TT.json
244 else
245 # this is the ATT case, rename the file in *-sadis-ATT.json so that we can avoid special cases and just load the file
246 curl -sSL --user karaf:karaf -X POST -H Content-Type:application/json http://${deployment_config.nodes[0].ip}:30120/onos/v1/network/configuration --data @$WORKSPACE/voltha-system-tests/tests/data/${configFileName}-sadis.json
247 fi
248 """
249 }
250 }
251 }
252 stage('Switch Configurations in ONOS') {
253 steps {
254 script {
255 if ( deployment_config.fabric_switches.size() > 0 ) {
256 timeout(1) {
257 def netcfg = "$WORKSPACE/${configBaseDir}/${configToscaDir}/voltha/${configFileName}-onos-netcfg-switch.json"
258 if (params.inBandManagement){
259 netcfg = "$WORKSPACE/${configBaseDir}/${configToscaDir}/voltha/${configFileName}-onos-netcfg-switch-inband.json"
260 }
261 sh """
262 curl -sSL --user karaf:karaf -X POST -H Content-Type:application/json http://${deployment_config.nodes[0].ip}:30120/onos/v1/network/configuration --data @${netcfg}
263 curl -sSL --user karaf:karaf -X POST http://${deployment_config.nodes[0].ip}:30120/onos/v1/applications/org.onosproject.segmentrouting/active
264 """
265 }
266 timeout(1) {
267 waitUntil {
268 sr_active_out = sh returnStatus: true, script: """
269 sshpass -p karaf ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "log:set TRACE org.opencord.dhcpl2relay"
270 sshpass -p karaf ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "log:set TRACE org.opencord.aaa"
271 sshpass -p karaf ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "log:set TRACE org.opencord.olt"
Andrea Campanella39b9b3d2021-09-09 16:54:20 +0200[diff] [blame]272 #TRACE in the pipeliner is too chatty, moving to DEBUG
273 sshpass -p karaf ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "log:set DEBUG org.opencord.olt.driver"
Hardik Windlass6d9a82e2021-07-08 16:23:21 +0000[diff] [blame]274 sshpass -p karaf ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "log:set DEBUG org.onosproject.net.flowobjective.impl.FlowObjectiveManager"
275 sshpass -p karaf ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "log:set DEBUG org.onosproject.net.flowobjective.impl.InOrderFlowObjectiveManager"
276 curl -sSL --user karaf:karaf -X GET http://${deployment_config.nodes[0].ip}:30120/onos/v1/applications/org.onosproject.segmentrouting | jq '.state' | grep ACTIVE
277 sshpass -p karaf ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "cfg set org.onosproject.provider.lldp.impl.LldpLinkProvider enabled false"
278 sshpass -p karaf ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "cfg set org.onosproject.net.flow.impl.FlowRuleManager purgeOnDisconnection false"
279 sshpass -p karaf ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "cfg set org.onosproject.net.meter.impl.MeterManager purgeOnDisconnection false"
280 """
281 return sr_active_out == 0
282 }
283 }
284 timeout(7) {
285 for(int i=0; i < deployment_config.hosts.src.size(); i++) {
286 for(int j=0; j < deployment_config.olts.size(); j++) {
287 def aggPort = -1
288 if(deployment_config.olts[j].serial == deployment_config.hosts.src[i].olt){
289 aggPort = deployment_config.olts[j].aggPort
290 if(aggPort == -1){
291 throw new Exception("Upstream port for the olt is not configured, field aggPort is empty")
292 }
293 sh """
294 sleep 30 # NOTE why are we sleeping?
295 curl -X POST --user karaf:karaf --header 'Content-Type: application/json' --header 'Accept: application/json' -d '{"deviceId": "${deployment_config.fabric_switches[0].device_id}", "vlanId": "${deployment_config.hosts.src[i].s_tag}", "endpoints": [${deployment_config.fabric_switches[0].bngPort},${aggPort}]}' 'http://${deployment_config.nodes[0].ip}:30120/onos/segmentrouting/xconnect'
296 """
297 }
298 }
299 }
300 }
301 }
302 }
303 }
304 }
305 stage('Reinstall OLT software') {
306 steps {
307 script {
308 if ( params.reinstallOlt ) {
309 for(int i=0; i < deployment_config.olts.size(); i++) {
310 // NOTE what is oltDebVersion23? is that for VOLTHA-2.3? do we still need this differentiation?
311 sh returnStdout: true, script: """
Hardik Windlass6cdbfa22021-07-13 06:21:35 +0000[diff] [blame]312 ssh-keyscan -H ${deployment_config.olts[i].sship} >> ~/.ssh/known_hosts
313 if [ "${params.inBandManagement}" == "true" ]; then
Hardik Windlass6d9a82e2021-07-08 16:23:21 +0000[diff] [blame]314 sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'kill -9 `pgrep -f "[b]ash /opt/openolt/openolt_dev_mgmt_daemon_process_watchdog"` || true'
Hardik Windlass6d9a82e2021-07-08 16:23:21 +0000[diff] [blame]315 fi
Hardik Windlass6cdbfa22021-07-13 06:21:35 +0000[diff] [blame]316 sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} "dpkg --install ${deployment_config.olts[i].oltDebVersion}"
Hardik Windlass6d9a82e2021-07-08 16:23:21 +0000[diff] [blame]317 sleep 10
318 """
319 timeout(5) {
320 waitUntil {
321 olt_sw_present = sh returnStdout: true, script: """
Andrea Campanella842cb5d2021-12-17 18:33:05 +0100[diff] [blame^]322 if [[ "${deployment_config.olts[i].oltDebVersion}" == *"asfvolt16"* ]]; then
Hardik Windlass6d9a82e2021-07-08 16:23:21 +0000[diff] [blame]323 sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'dpkg --list | grep asfvolt16 | wc -l'
Andrea Campanella842cb5d2021-12-17 18:33:05 +0100[diff] [blame^]324 elif [[ "${deployment_config.olts[i].oltDebVersion}" == *"asgvolt64"* ]]; then
Hardik Windlass6d9a82e2021-07-08 16:23:21 +0000[diff] [blame]325 sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'dpkg --list | grep asgvolt64 | wc -l'
Andrea Campanella842cb5d2021-12-17 18:33:05 +0100[diff] [blame^]326 elif [[ "${deployment_config.olts[i].oltDebVersion}" == *"rlt-1600x-w"* ]]; then
327 sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'dpkg --list | grep rlt-1600x-w | wc -l'
328 elif [[ "${deployment_config.olts[i].oltDebVersion}" == *"rlt-1600g-w"* ]]; then
329 sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'dpkg --list | grep rlt-1600g-w | wc -l'
330 elif [[ "${deployment_config.olts[i].oltDebVersion}" == *"rlt-3200g-w"* ]]; then
331 sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'dpkg --list | grep rlt-3200g-w | wc -l'
332 else
333 echo Unknown Debian package for openolt
Hardik Windlass6d9a82e2021-07-08 16:23:21 +0000[diff] [blame]334 fi
335 if (${deployment_config.olts[i].fortygig}); then
336 if [[ "${params.inBandManagement}" == "true" ]]; then
337 ssh-keyscan -H ${deployment_config.olts[i].sship} >> ~/.ssh/known_hosts
338 sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'mkdir -p /opt/openolt/'
339 sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'cp /root/watchdog-script/* /opt/openolt/'
340 sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'cp /root/bal_cli_appl/example_user_appl /broadcom'
341 sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'cp in-band-startup-script/* /etc/init.d/'
342 fi
343 fi
344 """
345 return olt_sw_present.toInteger() > 0
346 }
347 }
348 }
349 }
350 }
351 }
352 }
353 stage('Restart OLT processes') {
354 steps {
355 script {
Andrea Campanellaecefbc82021-08-27 11:06:31 +0200[diff] [blame]356 //rebooting OLTs
Hardik Windlass6d9a82e2021-07-08 16:23:21 +0000[diff] [blame]357 for(int i=0; i < deployment_config.olts.size(); i++) {
Girish Gowdrac5a3ef82021-10-06 12:58:49 -0700[diff] [blame]358 timeout(15) {
Hardik Windlass6d9a82e2021-07-08 16:23:21 +0000[diff] [blame]359 sh returnStdout: true, script: """
360 ssh-keyscan -H ${deployment_config.olts[i].sship} >> ~/.ssh/known_hosts
Girish Gowdrac5a3ef82021-10-06 12:58:49 -0700[diff] [blame]361 sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'rm -f /var/log/openolt.log; rm -f /var/log/dev_mgmt_daemon.log; rm -f /var/log/openolt_process_watchdog.log; reboot > /dev/null &' || true
Hardik Windlass6d9a82e2021-07-08 16:23:21 +0000[diff] [blame]362 """
363 }
Andrea Campanellaecefbc82021-08-27 11:06:31 +0200[diff] [blame]364 }
365 sh returnStdout: true, script: """
366 sleep ${params.waitTimerForOltUp}
367 """
368 //Checking dev_management_deamon and openoltprocesses
369 for(int i=0; i < deployment_config.olts.size(); i++) {
370 if ( params.oltAdapterReleaseName != "open-olt" ) {
371 timeout(15) {
372 waitUntil {
373 devprocess = sh returnStdout: true, script: "sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'ps -ef | grep dev_mgmt_daemon | wc -l'"
374 return devprocess.toInteger() > 0
375 }
Hardik Windlass6d9a82e2021-07-08 16:23:21 +0000[diff] [blame]376 }
Andrea Campanellaecefbc82021-08-27 11:06:31 +0200[diff] [blame]377 timeout(15) {
378 waitUntil {
379 openoltprocess = sh returnStdout: true, script: "sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'ps -ef | grep openolt | wc -l'"
380 return openoltprocess.toInteger() > 0
381 }
Hardik Windlass6d9a82e2021-07-08 16:23:21 +0000[diff] [blame]382 }
383 }
384 }
385 }
386 }
387 }
388 }
389
390 post {
391 aborted {
392 getPodsInfo("$WORKSPACE/failed")
393 sh """
394 kubectl logs -n voltha -l app.kubernetes.io/part-of=voltha > $WORKSPACE/failed/voltha.log || true
395 """
396 archiveArtifacts artifacts: '**/*.log,**/*.txt'
397 }
398 failure {
399 getPodsInfo("$WORKSPACE/failed")
400 sh """
401 kubectl logs -n voltha -l app.kubernetes.io/part-of=voltha > $WORKSPACE/failed/voltha.logs || true
402 """
403 archiveArtifacts artifacts: '**/*.log,**/*.txt'
404 }
405 always {
406 archiveArtifacts artifacts: '*.txt'
407 }
408 }
409}