blob: 5609414e809f6807a8df539319c40a3472b5dd52 [file] [log] [blame]
Luca Prete45401c82019-01-15 15:31:22 -08001// Copyright 2017-present Open Networking Foundation
2//
3// Licensed under the Apache License, Version 2.0 (the "License");
4// you may not use this file except in compliance with the License.
5// You may obtain a copy of the License at
6//
7// http://www.apache.org/licenses/LICENSE-2.0
8//
9// Unless required by applicable law or agreed to in writing, software
10// distributed under the License is distributed on an "AS IS" BASIS,
11// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
12// See the License for the specific language governing permissions and
13// limitations under the License.
14
15node ("${TestNodeName}") {
16 timeout (100) {
17 try {
18 stage ("Parse deployment configuration file") {
Matteo Scandolo9f8056b2019-01-17 10:33:51 -080019 sh returnStdout: true, script: "rm -rf helm-charts helm-repo-tools ${configBaseDir}"
Luca Prete45401c82019-01-15 15:31:22 -080020 sh returnStdout: true, script: "git clone -b ${branch} ${cordRepoUrl}/helm-repo-tools"
Wei-Yu Chen992665b2019-01-17 10:21:32 -080021 sh returnStdout: true, script: "git clone -b ${branch} ${cordRepoUrl}/helm-charts"
Luca Prete45401c82019-01-15 15:31:22 -080022 sh returnStdout: true, script: "git clone -b ${branch} ${cordRepoUrl}/${configBaseDir}"
23 deployment_config = readYaml file: "${configBaseDir}/${configDeploymentDir}/${configFileName}.yaml"
24 }
25 stage('Clean up') {
26 timeout(10) {
27 sh returnStdout: true, script: """
28 export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
29 for hchart in \$(helm list -q | grep -E -v 'docker-registry|mavenrepo|ponnet');
30 do
31 echo "Purging chart: \${hchart}"
32 helm delete --purge "\${hchart}"
33 done
34 """
35 timeout(5) {
36 waitUntil {
37 helm_deleted = sh returnStdout: true, script: """
38 export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf &&
39 helm ls -q | grep -E -v 'docker-registry|mavenrepo|ponnet' | wc -l
40 """
41 return helm_deleted.toInteger() == 0
42 }
43 }
Wei-Yu Chen9de5f162019-01-17 10:40:38 -080044 timeout(5) {
Wei-Yu Chen213821c2019-01-17 10:21:32 -080045 dir ("helm-charts") {
46 stage("Cleanup SR-IOV CNI and SR-IOV Network Device Plugin") {
47 sh returnStdout: true, script: """
48 export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
Wei-Yu Chenfa2aa092019-01-17 10:46:36 -080049 kubectl delete -f mcord/cni-config/05-sriov-device-plugin.yaml
50 kubectl delete -f mcord/cni-config/04-sriov-device-plugin-configmap.yaml
51 kubectl delete -f mcord/cni-config/03-network-definition.yaml
52 kubectl delete -f mcord/cni-config/02-network-crd.yaml
53 kubectl delete -f mcord/cni-config/01-cni-service-account.yaml
Wei-Yu Chen213821c2019-01-17 10:21:32 -080054 """
55 }
56 }
57 }
Luca Prete45401c82019-01-15 15:31:22 -080058 timeout(5) {
59 waitUntil {
60 kubectl_deleted = sh returnStdout: true, script: """
61 export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf &&
62 kubectl get pods --all-namespaces --no-headers | grep -E -v 'kube-system|docker-registry|mavenrepo|ponnet' | wc -l
63 """
64 return kubectl_deleted.toInteger() == 0
65 }
66 }
67 }
68 }
Luca Prete62a48c82019-01-16 10:40:01 -080069 stage('Add Helm repositories') {
Luca Prete45401c82019-01-15 15:31:22 -080070 sh returnStdout: true, script: """
71 export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
Wei-Yu Chen76dd7932019-01-18 14:14:23 -080072 helm init --upgrade --force-upgrade
Luca Prete45401c82019-01-15 15:31:22 -080073 helm repo add cord https://charts.opencord.org
Luca Prete62a48c82019-01-16 10:40:01 -080074 helm repo add incubator http://storage.googleapis.com/kubernetes-charts-incubator
Luca Prete45401c82019-01-15 15:31:22 -080075 helm repo update
76 """
77 timeout(1) {
78 waitUntil {
Wei-Yu Chen76dd7932019-01-18 14:14:23 -080079 tillerpod_running = sh returnStdout: true, script: """
80 export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf &&
81 kubectl -n kube-system get pods | grep tiller-deploy | grep Running | wc -l
82 """
83 return tillerpod_running.toInteger() == 1
84 }
85 }
86 timeout(1) {
87 waitUntil {
Luca Prete45401c82019-01-15 15:31:22 -080088 cord_repo_present = sh returnStdout: true, script: """
89 export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf &&
90 helm repo list | grep cord | wc -l
91 """
92 return cord_repo_present.toInteger() == 1
93 }
94 }
95 }
Matteo Scandolo08aea472019-01-23 11:45:37 -080096
97 stage('Install etcd-cluster') {
98 timeout(10) {
99 sh returnStdout: true, script: """
100 export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
101 helm install -f $WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.yml --version 0.8.3 -n etcd-operator stable/etcd-operator
102 helm install -f $WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.yml --set etcdNodePort=32379 cord/etcd-cluster
103 """
104 }
105 timeout(10) {
106 waitUntil {
107 etcd_running = sh returnStdout: true, script: """
108 export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf &&
109 kubectl get pods | grep etcd | grep -i running | grep 1/1 | wc -l
110 """
111 return etcd_running.toInteger() == 6
112 }
113 }
114 }
115
Wei-Yu Chen992665b2019-01-17 10:21:32 -0800116 dir ("helm-charts") {
117 stage('Install SR-IOV CNI and SR-IOV Network Device Plugin') {
Luca Prete45401c82019-01-15 15:31:22 -0800118 sh returnStdout: true, script: """
119 export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
Wei-Yu Chen992665b2019-01-17 10:21:32 -0800120 kubectl apply -f mcord/cni-config/02-network-crd.yaml
121 kubectl apply -f mcord/cni-config/
Wei-Yu Chen7f8c4dd2019-01-17 15:32:03 -0800122 sleep 5
Luca Prete45401c82019-01-15 15:31:22 -0800123 """
124 }
125 }
Wei-Yu Chen992665b2019-01-17 10:21:32 -0800126
Wei-Yu Chen037762d2019-01-24 11:12:39 -0800127 // In current development progress, we prefered to keep this for testing eNodeB's functionality
Wei-Yu Chen992665b2019-01-17 10:21:32 -0800128 stage("Install M-CORD Control Plane Services") {
129 sh returnStdout: true, script: """
130 export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
Wei-Yu Chen7f8c4dd2019-01-17 15:32:03 -0800131 helm install -n mcord-control-plane --namespace epc -f $WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.yml cord/mcord-control-plane
Wei-Yu Chen992665b2019-01-17 10:21:32 -0800132 """
Luca Prete45401c82019-01-15 15:31:22 -0800133 }
Wei-Yu Chen992665b2019-01-17 10:21:32 -0800134
135 stage("Install M-CORD Data Plane Services") {
136 sh returnStdout: true, script: """
137 export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
Wei-Yu Chen7f8c4dd2019-01-17 15:32:03 -0800138 helm install -n mcord-data-plane --namespace epc -f $WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.yml cord/mcord-data-plane
Wei-Yu Chen992665b2019-01-17 10:21:32 -0800139 """
Luca Prete45401c82019-01-15 15:31:22 -0800140 }
Wei-Yu Chen992665b2019-01-17 10:21:32 -0800141
Matteo Scandolo202064f2019-01-24 15:01:39 -0800142 stage('Install CORD Kafka') {
143 timeout(10) {
144 sh returnStdout: true, script: """
145 export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
146 helm install --version 0.8.8 --set configurationOverrides."offsets\\.topic\\.replication\\.factor"=1 --set configurationOverrides."log\\.retention\\.hours"=4 --set configurationOverrides."log\\.message\\.timestamp\\.type"="LogAppendTime" --set replicas=1 --set persistence.enabled=false --set zookeeper.replicaCount=1 --set zookeeper.persistence.enabled=false -n cord-kafka incubator/kafka
147 """
148 }
149 timeout(10) {
150 waitUntil {
151 kafka_instances_running = sh returnStdout: true, script: """
152 export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf &&
153 kubectl get pods | grep cord-kafka | grep -i running | grep 1/1 | wc -l
154 """
155 return kafka_instances_running.toInteger() == 2
156 }
157 }
158 }
Wei-Yu Chen992665b2019-01-17 10:21:32 -0800159 // stage('Install Logging Infrastructure') {
160 // timeout(10) {
161 // sh returnStdout: true, script: """
162 // export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
163 // helm install -f $WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.yml --set elasticsearch.cluster.env.MINIMUM_MASTER_NODES="1" --set elasticsearch.client.replicas=1 --set elasticsearch.master.replicas=2 --set elasticsearch.master.persistence.enabled=false --set elasticsearch.data.replicas=1 --set elasticsearch.data.persistence.enabled=false -n logging cord/logging
164 // helm-repo-tools/wait_for_pods.sh
165 // """
166 // }
167 // }
168 // stage('Install Monitoring Infrastructure') {
169 // timeout(10) {
170 // sh returnStdout: true, script: """
171 // export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
172 // helm install -f $WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.yml -n nem-monitoring cord/nem-monitoring
173 // helm-repo-tools/wait_for_pods.sh
174 // """
175 // }
176 // }
Matteo Scandolo202064f2019-01-24 15:01:39 -0800177 stage('Install ONOS') {
178 timeout(10) {
179 sh returnStdout: true, script: """
180 export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
181 helm install -n onos -f $WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.yml cord/onos
182 """
183 }
184 timeout(10) {
185 waitUntil {
186 onos_completed = sh returnStdout: true, script: """
187 export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf &&
188 kubectl get pods | grep -i onos | grep -i running | grep 2/2 | wc -l
189 """
190 return onos_completed.toInteger() == 1
191 }
192 }
193 }
194 stage('Install xos-core') {
195 timeout(10) {
196 sh returnStdout: true, script: """
197 export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
198 helm install -f $WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.yml -n xos-core cord/xos-core
199 """
200 }
201 timeout(10) {
202 waitUntil {
203 xos_core_completed = sh returnStdout: true, script: """
204 export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf &&
205 kubectl get pods | grep -i xos | grep -i running | grep 1/1 | wc -l
206 """
207 return xos_core_completed.toInteger() == 6
208 }
209 }
210 }
211 stage('Install M-CORD Profile') {
212 timeout(10) {
213 sh returnStdout: true, script: """
214 export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
215 helm install -f $WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.yml -n mcord cord/mcord
216 """
217 }
218 timeout(10) {
219 waitUntil {
220 tosca_completed = sh returnStdout: true, script: """
221 export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf &&
222 kubectl get pods | grep -i mcord-tosca-loader | grep -i completed | wc -l
223 """
224 return tosca_completed.toInteger() == 1
225 }
226 }
227 }
Luca Prete45401c82019-01-15 15:31:22 -0800228
229 if ( params.configurePod ) {
Matteo Scandolo202064f2019-01-24 15:01:39 -0800230 dir ("${configBaseDir}/${configToscaDir}/mcord") {
231 stage('Configure MCORD - Fabric') {
Luca Prete45401c82019-01-15 15:31:22 -0800232 timeout(1) {
233 waitUntil {
234 out_fabric = sh returnStdout: true, script: """
235 curl -s -H "xos-username:admin@opencord.org" -H "xos-password:letmein" -X POST --data-binary @${configFileName}-fabric.yaml http://${deployment_config.nodes[0].ip}:30007/run | grep -i "created models" | wc -l
236 """
237 return out_fabric.toInteger() == 1
238 }
239 }
240 }
Matteo Scandolo202064f2019-01-24 15:01:39 -0800241 // stage('Configure R-CORD - Subscriber') {
242 // timeout(1) {
243 // waitUntil {
244 // out_subscriber = sh returnStdout: true, script: """
245 // curl -s -H 'xos-username:admin@opencord.org' -H 'xos-password:letmein' -X POST --data-binary @${configFileName}-subscriber.yaml http://${deployment_config.nodes[0].ip}:30007/run | grep -i "created models" | wc -l
246 // """
247 // return out_subscriber.toInteger() == 1
248 // }
249 // }
250 // }
251 // stage('Configure R-CORD - OLT') {
252 // timeout(1) {
253 // waitUntil {
254 // out_olt = sh returnStdout: true, script: """
255 // curl -H 'xos-username:admin@opencord.org' -H 'xos-password:letmein' -X POST --data-binary @${configFileName}-olt.yaml http://${deployment_config.nodes[0].ip}:30007/run | grep -i "created models" | wc -l
256 // """
257 // return out_olt.toInteger() == 1
258 // }
259 // }
260 // }
Luca Prete45401c82019-01-15 15:31:22 -0800261 }
262 }
263 currentBuild.result = 'SUCCESS'
264 } catch (err) {
265 currentBuild.result = 'FAILURE'
266 step([$class: 'Mailer', notifyEveryUnstableBuild: true, recipients: "${notificationEmail}", sendToIndividuals: false])
267 }
268 echo "RESULT: ${currentBuild.result}"
269 }
270}