blob: 4781181532a85bd6f86bf3f7be452758e7848a9e [file] [log] [blame]
// Copyright 2018 Open Networking Foundation
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
At the root of the device-management source tree
1. cd demotest
make demotest
./demotest
2. Create another ssh session
cd ./demotest/cmd_cleint
make cmd_cl
./cmd_cl
then it will have "CMD to send:" prompt
You can use the following "client cmd" to test.
Example:
For the first time, you need to use "attach:ipaddress:port:vendorname:freq" to set the device's IP related info.
If successful, you will get "[ipaddress:port]CMD to send:" prompt to indicate what device you attached now.
This attach will subscribe default 3 types events into the server.
You can use the following wget to check if any events subscriptions on the device.
wget --no-check-certificate \
-qO- https://RFSERVERIP:8888/redfish/v1/EventService/Subscriptions/ \
| python -m json.tool
You can also use "unsub:add:rm:alert" to unsubscribe all 3 types of event subscriptions on the device.
And use "QUIT" to leave test.
--------------------------------------------------------------------------------------
Test items client cmd
--------------------------------------------------------------------------------------
set device info Example:
Set IP 192.168.4.27 port 8888 vendor "edgecore" freq 180
attach:192.168.4.27:8888:edgecore:180
--------------------------------------------------------------------------------------
set multi-device info Example:
attach:192.168.4.27:8888:edgecore:180
attach:192.168.3.34:8888:edgecore:180
--------------------------------------------------------------------------------------
Get Current List of Devices monitored showdevices
Return from server: 192.168.4.26:8888,192.168.4.27:8888
--------------------------------------------------------------------------------------
UnSubscribe all events(ResourceAdded/ResourceRemoved/Alert) unsub:192.168.4.27:8888:add:rm:alert
--------------------------------------------------------------------------------------
Subscribe all events(ResourceAdded/ResourceRemoved/Alert) sub:192.168.4.27:8888:add:rm:alert
--------------------------------------------------------------------------------------
Subscribe and unsubscribe an event Example:
Subscribe ResourceAdded event sub:192.168.4.27:8888:add
Subscribe ResourceRemoved event sub:192.168.4.27:8888:rm
Subscribe Alert event sub:192.168.4.27:8888:alert
Unsubscribe ResourceAdded event unsub:192.168.4.27:8888:add
Unsubscribe ResourceRemoved event unsub:192.168.4.27:8888:rm
Unsubscribe Alert event unsub:192.168.4.27:8888:alert
--------------------------------------------------------------------------------------
Subscribe and unsubscribe multiple events, out of order Use the above commands to do test.
--------------------------------------------------------------------------------------
Subscribe an unsupported event sub:192.168.4.27:8888:update
--------------------------------------------------------------------------------------
Subscribe to an already subscribed event Example:
sub:192.168.4.27:8888:add
sub:192.168.4.27:8888:add
--------------------------------------------------------------------------------------
Unsubscribe an unsupported event unsub:192.168.4.27:8888:update
--------------------------------------------------------------------------------------
Unsubscribe a supported but not-subscribed event Example:
unsub:192.168.4.27:8888:add:rm:alert
unsub:192.168.4.27:8888:add
unsub:192.168.4.27:8888:rm
unsub:192.168.4.27:8888:alert
--------------------------------------------------------------------------------------
Change polling interval Example:
Set frequecny to 30 seconds
period:192.168.4.27:8888:30
--------------------------------------------------------------------------------------
Show support event list vendor showeventlist:edgecore
-----------------------------------------------------------------------------------------------
Show current events subscribed by device showdeviceeventlist:192.168.4.27:8888
------------------------------------------------------------------------------------------------------------
Clear all current events subscribed by device cleardeviceeventlist:192.168.4.27:8888
-------------------------------------------------------------------------------------------------------------
* During and after each test, verify the list of events subscribed wget --no-check-certificate \
-qO- https://192.168.4.27:8888/redfish/v1/EventService/Subscriptions/ \
| python -m json.tool
--------------------------------------------------------------------------------------