blob: dd36731130197079782aade28fee60a52dd8e5f4 [file] [log] [blame]
Test User01ed0642019-07-03 20:17:06 +00001#!/bin/bash
David K. Bainbridgeb7285432019-07-02 22:05:24 -07002# Copyright 2019 Ciena Corporation
3#
4# Licensed under the Apache License, Version 2.0 (the "License");
5# you may not use this file except in compliance with the License.
6# You may obtain a copy of the License at
7#
8# http://www.apache.org/licenses/LICENSE-2.0
9#
10# Unless required by applicable law or agreed to in writing, software
11# distributed under the License is distributed on an "AS IS" BASIS,
12# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
13# See the License for the specific language governing permissions and
14# limitations under the License.
David Bainbridge712afb82019-08-14 19:55:58 +000015TOTAL_START_TIME=$(date +%s)
David K. Bainbridgeb7285432019-07-02 22:05:24 -070016
David Bainbridge38dc1e82019-08-12 15:18:45 +000017FANCY=${FANCY:-1}
18if [ "$TERM X" == " X" ]; then
19 FANCY=0
20fi
21
David K. Bainbridgeb7285432019-07-02 22:05:24 -070022# trap ctrl-c and call ctrl_c()
23trap ctrl_c INT
24
25function ctrl_c() {
David Bainbridge38dc1e82019-08-12 15:18:45 +000026 echo -en $CNORM
David K. Bainbridgeb7285432019-07-02 22:05:24 -070027 echo ""
28 echo "ctrl-c trapped"
29 echo "Thank you for trying 'votlha up'"
30 exit
31}
32
Test User08ebbd92019-07-03 17:15:39 +000033VOLTCTL_VERSION=${VOLTCTL_VERSION:-0.0.5-dev}
34KIND_VERSION=${KIND_VERSION:-v0.4.0}
35_VOLTCTL_VERSION=$(echo $VOLTCTL_VERSION | sed -e 's/-/_/g')
36
David Bainbridge38dc1e82019-08-12 15:18:45 +000037BLACK=
38RED=
39GREEN=
40YELLOW=
41BLUE=
42MAGENTA=
43CYAN=
44WHITE=
45BOLD=
46NORMAL=
47ERROR=
48CEOL=
49CNORM=
50CIVIS=
51if [ $FANCY -eq 1 ]; then
52 BLACK=$(tput setaf 0)
53 RED=$(tput setaf 1)
54 GREEN=$(tput setaf 2)
55 YELLOW=$(tput setaf 3)
56 BLUE=$(tput setaf 4)
57 MAGENTA=$(tput setaf 5)
58 CYAN=$(tput setaf 6)
59 WHITE=$(tput setaf 7)
60 BOLD=$(tput bold)
61 NORMAL=$(tput sgr0)
62 ERROR="\xe2\x9c\x97\x20"
63 CEOL=$(tput el)
64 CNORM=$(tput cnorm)
65 CIVIS=$(tput civis)
66fi
Test User7d866122019-07-09 17:52:35 +000067
Test User3d7ad8e2019-07-03 06:15:44 +000068TYPE=${TYPE:-minimal}
David Bainbridge0774b232019-08-02 06:37:19 +000069NAME=${NAME:-$TYPE}
David Bainbridgee87067b2019-08-12 22:00:12 +000070WITH_TIMINGS=${WITH_TIMINGS:-no}
Test User7d866122019-07-09 17:52:35 +000071WITH_BBSIM=${WITH_BBSIM:-no}
David Bainbridge5b7b96b2019-07-25 20:29:13 +000072WITH_RADIUS=${WITH_RADIUS:-no}
David Bainbridgeb270c202019-07-26 01:44:42 +000073WITH_ONOS=${WITH_ONOS:-yes}
David Bainbridge99ac7a22019-08-31 02:26:43 +000074WITH_CHAOS=${WITH_CHAOS:-no}
David Bainbridge46505fb2019-10-01 21:13:20 +000075WITH_ADAPTERS=${WITH_ADAPTERS:-yes}
76WITH_SIM_ADAPTERS=${WITH_SIM_ADAPTERS:-yes}
77WITH_OPEN_ADAPTERS=${WITH_OPEN_ADAPTERS:-yes}
David Bainbridge2b19e832019-08-16 02:40:53 +000078CONFIG_SADIS=${CONFIG_SADIS:-no}
David Bainbridge27790d62019-08-13 22:43:19 +000079INSTALL_ONOS_APPS=${INSTALL_ONOS_APPS:-no}
Test Userba1e7e72019-07-10 22:27:54 +000080JUST_K8S=${JUST_K8S:-no}
81DEPLOY_K8S=${DEPLOY_K8S:-yes}
David Bainbridgea3b56322019-09-03 20:40:42 +000082SKIP_RESTART_API=${SKIP_RESTART_API:-yes}
David K. Bainbridge0e89cb92019-07-17 11:30:10 -070083INSTALL_KUBECTL=${INSTALL_KUBECTL:-yes}
84INSTALL_HELM=${INSTALL_HELM:-yes}
David Bainbridge46505fb2019-10-01 21:13:20 +000085UPDATE_HELM_REPOS=${UPDATE_HELM_REPOS:-yes}
David Bainbridge4f1b5562019-08-19 04:46:52 +000086WAIT_ON_DOWN=${WAIT_ON_DOWN:-no}
David Bainbridge5b7b96b2019-07-25 20:29:13 +000087VOLTHA_LOG_LEVEL=${VOLTHA_LOG_LEVEL:-WARN}
David Bainbridge90fd8e32019-08-21 23:32:47 +000088VOLTHA_CHART=${VOLTHA_CHART:-onf/voltha}
89VOLTHA_CHART_VERSION=${VOLTHA_CHART_VERSION:-latest}
90VOLTHA_BBSIM_CHART=${VOLTHA_BBSIM_CHART:-onf/bbsim}
91VOLTHA_BBSIM_CHART_VERSION=${VOLTHA_BBSIM_CHART_VERSION:-latest}
David Bainbridgee10f6d52019-07-25 00:28:13 +000092VOLTHA_ADAPTER_SIM_CHART=${VOLTHA_ADAPTER_SIM_CHART:-onf/voltha-adapter-simulated}
David Bainbridge90fd8e32019-08-21 23:32:47 +000093VOLTHA_ADAPTER_SIM_CHART_VERSION=${VOLTHA_ADAPTER_SIM_CHART_VERSION:-latest}
David Bainbridgee10f6d52019-07-25 00:28:13 +000094VOLTHA_ADAPTER_OPEN_OLT_CHART=${VOLTHA_ADAPTER_OPEN_OLT_CHART:-onf/voltha-adapter-openolt}
David Bainbridge90fd8e32019-08-21 23:32:47 +000095VOLTHA_ADAPTER_OPEN_OLT_CHART_VERSION=${VOLTHA_ADAPTER_OPEN_OLT_CHART_VERSION:-latest}
David Bainbridgee10f6d52019-07-25 00:28:13 +000096VOLTHA_ADAPTER_OPEN_ONU_CHART=${VOLTHA_ADAPTER_OPEN_ONU_CHART:-onf/voltha-adapter-openonu}
David Bainbridge90fd8e32019-08-21 23:32:47 +000097VOLTHA_ADAPTER_OPEN_ONU_CHART_VERSION=${VOLTHA_ADAPTER_OPEN_ONU_CHART_VERSION:-latest}
98
Test Userba1e7e72019-07-10 22:27:54 +000099
100HAVE_GO=$(which go >/dev/null 2>&1 && echo "yes" || echo "no")
101HOSTOS=$(uname -s | tr "[:upper:]" "[:lower:"])
102HOSTARCH=$(uname -m | tr "[:upper:]" "[:lower:"])
103if [ $HOSTARCH == "x86_64" ]; then
104 HOSTARCH="amd64"
105fi
Test User7d866122019-07-09 17:52:35 +0000106
107# Verify TYPE setting
108if [ $(echo ":minimal:full:" | grep -ic ":$TYPE:") -eq 0 ]; then
David K. Bainbridge0e89cb92019-07-17 11:30:10 -0700109 >&2 echo -e "${RED}${BOLD}${ERROR}ERROR:${NORMAL}${RED} Invalid \$TYPE value of '$TYPE'. Should be 'minimal' or 'full'${NORMAL}"
Test User7d866122019-07-09 17:52:35 +0000110 exit 1
111fi
112
David Bainbridge2a0b8a42019-08-16 17:39:29 +0000113# Used to verify configuration values are set to "yes" or "no" value or convert
114# equivalents to "yes" or "no"
115function verify_yes_no() {
116 local VAR=$1
117 local VAL=$(eval echo \$$VAR)
118 if [ $(echo ":y:yes:true:n:no:false:1:0:" | grep -ic ":$VAL:") -eq 0 ]; then
119 >&2 echo -e "${RED}${BOLD}${ERROR}ERROR:${NORMAL}${RED} Invalid '$VAR' value of '$VAL'. Should be 'yes' or 'no'${NORMAL}"
120 echo "INVALID"
121 return 1
122 fi
123 if [ $(echo ":y:yes:true:1:" | grep -ic ":$VAL:") -eq 1 ]; then
124 echo "yes"
125 else
126 echo "no"
127 fi
128 return 0
129}
Test User7d866122019-07-09 17:52:35 +0000130
David Bainbridge2a0b8a42019-08-16 17:39:29 +0000131ALL_YES_NO="\
132 WITH_TIMINGS \
133 WITH_BBSIM \
134 WITH_RADIUS \
135 WITH_ONOS \
David Bainbridge99ac7a22019-08-31 02:26:43 +0000136 WITH_CHAOS \
David Bainbridge46505fb2019-10-01 21:13:20 +0000137 WITH_ADAPTERS \
138 WITH_SIM_ADAPTERS \
139 WITH_OPEN_ADAPTERS \
David Bainbridge2a0b8a42019-08-16 17:39:29 +0000140 CONFIG_SADIS \
141 JUST_K8S \
142 DEPLOY_K8S \
143 INSTALL_ONOS_APPS \
144 SKIP_RESTART_API \
145 INSTALL_KUBECTL \
146 INSTALL_HELM \
David Bainbridge46505fb2019-10-01 21:13:20 +0000147 UPDATE_HELM_REPOS \
David Bainbridge4f1b5562019-08-19 04:46:52 +0000148 WAIT_ON_DOWN \
David Bainbridge2a0b8a42019-08-16 17:39:29 +0000149 "
David Bainbridge5b7b96b2019-07-25 20:29:13 +0000150
David Bainbridge2a0b8a42019-08-16 17:39:29 +0000151ALL_OPTIONS="\
152 NAME \
153 TYPE \
154 $ALL_YES_NO \
155 VOLTHA_LOG_LEVEL \
156 VOLTHA_CHART \
David Bainbridge90fd8e32019-08-21 23:32:47 +0000157 VOLTHA_CHART_VERSION \
158 VOLTHA_BBSIM_CHART \
159 VOLTHA_BBSIM_CHART_VERSION \
David Bainbridge2a0b8a42019-08-16 17:39:29 +0000160 VOLTHA_ADAPTER_SIM_CHART \
David Bainbridge90fd8e32019-08-21 23:32:47 +0000161 VOLTHA_ADAPTER_SIM_CHART_VERSION \
David Bainbridge2a0b8a42019-08-16 17:39:29 +0000162 VOLTHA_ADAPTER_OPEN_OLT_CHART \
David Bainbridge90fd8e32019-08-21 23:32:47 +0000163 VOLTHA_ADAPTER_OPEN_OLT_CHART_VERSION \
David Bainbridge2a0b8a42019-08-16 17:39:29 +0000164 VOLTHA_ADAPTER_OPEN_ONU_CHART \
David Bainbridge90fd8e32019-08-21 23:32:47 +0000165 VOLTHA_ADAPTER_OPEN_ONU_CHART_VERSION \
David Bainbridge2a0b8a42019-08-16 17:39:29 +0000166 ONOS_API_PORT \
167 ONOS_SSH_PORT \
168 VOLTHA_API_PORT \
169 VOLTHA_SSH_PORT \
170 VOLTHA_ETCD_PORT \
171 "
David Bainbridge01294952019-07-30 19:33:45 +0000172
David Bainbridge2a0b8a42019-08-16 17:39:29 +0000173# Iterate over yes/no configuration options and validate
174for VAR in $ALL_YES_NO; do
175 eval $VAR=$(verify_yes_no $VAR)
176 if [ "$(eval echo \$$VAR)" == "INVALID" ]; then
177 exit 1;
178 fi
179done
David Bainbridgeb270c202019-07-26 01:44:42 +0000180
David Bainbridge0774b232019-08-02 06:37:19 +0000181mkdir -p .voltha
182touch .voltha/ports
183HAVE=$(grep $NAME .voltha/ports)
184if [ "$HAVE X" == " X" ]; then
185 # Find free port prefix
186 START=81
187 while true; do
188 if [ $(grep -c $START .voltha/ports) -eq 0 ]; then
189 break
190 fi
191 START=$(expr $START + 1)
192 done
193 DELTA=$(expr $START - 81)
194 ONOS_API_PORT=${START}81
195 ONOS_SSH_PORT=${START}01
196 VOLTHA_API_PORT=5$(expr 55 + $DELTA)55
197 VOLTHA_SSH_PORT=$(expr 50 + $DELTA)22
198 VOLTHA_ETCD_PORT=$(expr 23 + $DELTA)79
Test User01ed0642019-07-03 20:17:06 +0000199else
David Bainbridge0774b232019-08-02 06:37:19 +0000200 VALUES=$(echo $HAVE | sed -e 's/\s//g' | cut -d= -f2)
201 ONOS_API_PORT=$(echo $VALUES | cut -d, -f1)
202 ONOS_SSH_PORT=$(echo $VALUES | cut -d, -f2)
203 VOLTHA_API_PORT=$(echo $VALUES | cut -d, -f3)
204 VOLTHA_SSH_PORT=$(echo $VALUES | cut -d, -f4)
205 VOLTHA_ETCD_PORT=$(echo $VALUES | cut -d, -f5)
Test User01ed0642019-07-03 20:17:06 +0000206fi
207
David Bainbridge0774b232019-08-02 06:37:19 +0000208PORTTMP=$(mktemp -u)
209cat .voltha/ports | grep -v $NAME > $PORTTMP
210echo "$NAME=$ONOS_API_PORT,$ONOS_SSH_PORT,$VOLTHA_API_PORT,$VOLTHA_SSH_PORT,$VOLTHA_ETCD_PORT" >> $PORTTMP
211cp $PORTTMP .voltha/ports
212rm -f $PORTTMP
213
David Bainbridge27790d62019-08-13 22:43:19 +0000214export ONOS_API_PORT ONOS_SSH_PORT
David Bainbridge01294952019-07-30 19:33:45 +0000215
Test Userd87942b2019-07-03 07:20:24 +0000216IDX=1
David Bainbridgee87067b2019-08-12 22:00:12 +0000217CLOCK="TIME:"
David Bainbridge38dc1e82019-08-12 15:18:45 +0000218SPIN_PARTS=
219NOT_VERIFIED=
David Bainbridgef858a022019-08-14 21:25:11 +0000220THEX=
221BUILD=
222CROSS=
223ENTER=
David Bainbridge38dc1e82019-08-12 15:18:45 +0000224VERIFIED=
225HELM=
226OLD_KEY=
227BIRD=
228HIGH_VOLTAGE=
229PLUG=
230RESTART=
231FORWARD=
232INSTALL=
233STOP=
234GO=
235DOWNLOAD=
236GEAR=
237NO_ENTRY=
238LOCK=
239
240if [ $FANCY -eq 1 ]; then
241 SPIN_PARTS="\
242 \xe2\xa2\x8e\xe2\xa1\xb0 \
243 \xe2\xa2\x8e\xe2\xa1\xa1 \
244 \xe2\xa2\x8e\xe2\xa1\x91 \
245 \xe2\xa2\x8e\xe2\xa0\xb1 \
246 \xe2\xa0\x8e\xe2\xa1\xb1 \
247 \xe2\xa2\x8a\xe2\xa1\xb1 \
248 \xe2\xa2\x8c\xe2\xa1\xb1 \
249 \xe2\xa2\x86\xe2\xa1\xb1 \
250 "
David Bainbridgee87067b2019-08-12 22:00:12 +0000251 CLOCK="\xe2\x8f\xb1"
David Bainbridgef858a022019-08-14 21:25:11 +0000252 THEX="${RED}${BOLD}\xe2\x9c\x97\x20${NORMAL}"
253 ENTER="${YELLOW}${BOLD}\xe2\x8e\x86${NORMAL}"
254 CROSS="${YELLOW}${BOLD}\xe2\x9c\x9a${NORMAL}"
255 BUILD="${YELLOW}${BOLD}\xf0\x9f\x8f\x97${NORMAL}"
256 NOT_VERIFIED="$BUILD"
257 VERIFIED="${GREEN}${BOLD}\xe2\x9c\x93\x20${NORMAL}"
258 HELM="${BLUE}${BOLD}\xE2\x8E\x88${NORMAL}"
David Bainbridge38dc1e82019-08-12 15:18:45 +0000259 OLD_KEY="\xF0\x9F\x97\x9D"
260 BIRD="\xF0\x9F\x90\xA6"
261 HIGH_VOLTAGE="\xE2\x9A\xA1"
262 PLUG="\xF0\x9F\xa7\xa9"
263 RESTART="\xf0\x9f\x94\x84"
264 FORWARD="\xE2\x87\xA8"
265 INSTALL="\xF0\x9F\x8F\x97"
266 STOP="\xf0\x9f\x9b\x91"
267 GO="\xf0\x9f\x9a\x80"
268 DOWNLOAD="\xf0\x9f\x93\xa5"
269 GEAR="\xe2\x9a\x99"
270 NO_ENTRY="\xe2\x9b\x94"
271 LOCK="\xf0\x9f\x94\x92"
272fi
David K. Bainbridge0e89cb92019-07-17 11:30:10 -0700273
David Bainbridge712afb82019-08-14 19:55:58 +0000274duration() {
David Bainbridgee87067b2019-08-12 22:00:12 +0000275 local h=$(expr $1 / 3600)
276 local m=$(expr $1 % 3600 / 60)
277 local s=$(expr $1 % 60)
278 local t=""
279
280 if [ $h -gt 0 ]; then
281 t="$t${h}h"
282 fi
283 if [ $m -gt 0 ]; then
284 t="$t${m}m"
285 fi
David Bainbridge712afb82019-08-14 19:55:58 +0000286 echo "$t${s}s"
287}
288
289printtime() {
290 local INDENT=
291 if [ "$1" == "-" ]; then
292 INDENT=" "
293 shift
294 fi
295 echo -e "$INDENT $CLOCK $(duration $1)"
David Bainbridgee87067b2019-08-12 22:00:12 +0000296}
297
David K. Bainbridgeb7285432019-07-02 22:05:24 -0700298bspin() {
Test Userd87942b2019-07-03 07:20:24 +0000299 IDX=1
David K. Bainbridgeb7285432019-07-02 22:05:24 -0700300 local INDENT=
301 if [ "$1" == "-" ]; then
302 INDENT=" "
303 shift
304 fi
David Bainbridge38dc1e82019-08-12 15:18:45 +0000305 if [ $FANCY -eq 0 ]; then
306 LINE=$(echo $* | sed -e 's/[\s+-]//g')
307 if [ "$LINE X" == " X" ]; then
308 return
309 fi
310 echo -e "$CIVIS$INDENT$*"
311 else
312 echo -en "$CIVIS$INDENT $*"
313 fi
David K. Bainbridgeb7285432019-07-02 22:05:24 -0700314}
315
316sspin() {
317 local INDENT=
318 if [ "$1" == "-" ]; then
319 INDENT=" "
320 shift
321 fi
David Bainbridge38dc1e82019-08-12 15:18:45 +0000322 if [ $FANCY -eq 0 ]; then
323 LINE=$(echo $* | sed -e 's/[\s+-]//g')
324 if [ "$LINE X" == " X" ]; then
325 return
326 fi
327 echo -e "$INDENT$*"
328 else
329 C=$(echo $SPIN_PARTS | cut '-d ' -f $IDX)
330 echo -en "\r$INDENT$C $*"
331 IDX=$(expr $IDX + 1)
332 if [ $IDX -gt 8 ]; then
333 IDX=1
334 fi
David K. Bainbridgeb7285432019-07-02 22:05:24 -0700335 fi
336}
337
338espin() {
339 local INDENT=
340 if [ "$1" == "-" ]; then
341 INDENT=" "
342 shift
343 fi
David Bainbridge38dc1e82019-08-12 15:18:45 +0000344 if [ $FANCY -eq 0 ]; then
345 LINE=$(echo $* | sed -e 's/[\s+-]//g')
346 if [ "$LINE X" == " X" ]; then
347 return
348 fi
349 echo -e "$INDENT$*"
350 else
351 echo -e "\r$INDENT$*$CNORM"
352 fi
David K. Bainbridgeb7285432019-07-02 22:05:24 -0700353}
354
David Bainbridgeac7f8072019-08-01 22:15:33 +0000355if [ "$1" == "get" -a "$2" == "voltconfig" ]; then
David Bainbridge0774b232019-08-02 06:37:19 +0000356 echo "$HOME/.volt/config-$NAME"
David Bainbridgeac7f8072019-08-01 22:15:33 +0000357 exit
358fi
359
360if [ $# -ne 1 -o $(echo ":up:down:dump:" | grep -c ":$1:") -ne 1 ]; then
361 >&2 echo "What wouild you like to do today:"
362 >&2 echo " up - bring up voltha"
363 >&2 echo " down - tear down voltha"
364 >&2 echo " dump - create a debug dump of running system"
365 exit 1
366fi
367
David Bainbridge4f1b5562019-08-19 04:46:52 +0000368push_onos_config() {
369 local MSG=$1
370 local RESOURCE=$2
371 local DATA=$3
372
373 bspin - "$MSG $GEAR"
374 while true; do
375 (set -x; curl --fail -sSL --user karaf:karaf -X POST -H Content-Type:application/json http://127.0.0.1:$ONOS_API_PORT/onos/v1/$RESOURCE --data @$DATA >>$LOG 2>&1) >>$LOG 2>&1
376 if [ $? -eq 0 ]; then
377 break
378 fi
379 sleep .2
380 sspin -
381 done
382 espin - $VERIFIED
383}
384
385override_onos_app() {
386 local APP=$1
387 local NAME=$(basename $APP | sed -e 's/^[0-9][0-9]*-//g' -e 's/-.*$//g')
388 while true; do
389 sspin -
390 # Attempt to delete old version (if it exists)
391 (set -x; curl --fail -sSL --user karaf:karaf -X DELETE http://127.0.0.1:$ONOS_API_PORT/onos/v1/applications/$NAME >>$LOG 2>&1) >>$LOG 2>&1
392 sspin -
393 if [ $? -ne 0 ]; then
394 continue
395 fi
396 (set -x; curl --fail -sSL --user karaf:karaf -X POST -H Content-Type:application/octet-stream http://127.0.0.1:$ONOS_API_PORT/onos/v1/applications?activate=true --data-binary @$APP >>$LOG 2>&1) >>$LOG 2>&1
397 if [ $? -eq 0 ]; then
398 break
399 fi
400 sleep .2
401 done
402}
403
404activate_onos_app() {
405 local MSG="$1"
406 local APP=$2
407
408 bspin - "$MSG $GO"
409 while true; do
410 sspin -
411 (set -x; curl --fail -sSL --user karaf:karaf -X POST http://127.0.0.1:$ONOS_API_PORT/onos/v1/applications/$APP/active >>$LOG 2>&1) >>$LOG 2>&1
412 if [ $? -eq 0 ]; then
413 break
414 fi
415 sleep .2
416 done
417 espin - "$VERIFIED"
418}
419
420count_pods() {
421 local NAMESPACE=$1; shift
422 if [ "$NAMESPACE" == "all-namespaces" ]; then
423 NAMESPACE="--all-namespaces"
424 else
425 NAMESPACE="-n $NAMESPACE"
426 fi
427 echo "$NAMESPACE" > /tmp/t
428 local STATES=$1; shift
429 echo "$STATES" >> /tmp/t
430 local PODS=$(kubectl get $NAMESPACE pod -o go-template="{{range .items}}{{.metadata.name}}/{{.status.phase}}/_{{range .status.containerStatuses}}{{.ready}}_{{end}} {{end}}")
431 local COUNT=0
432 local PATTERNS="$*"
433 for POD in $PODS; do
434 local NAME=$(echo $POD | cut -d/ -f 1)
435 local STATE=$(echo $POD | cut -d/ -f 2)
436 local CONTAINERS=$(echo $POD | cut -d/ -f 3 | sed -e 's/_/ /g')
437 if [ "$STATES" == "*" -o $(echo "$STATES" | grep -c ":$STATE:") -ne 0 ]; then
438 echo "IN WITH $POD" >> /tmp/t
439 local TOTAL=$(echo $CONTAINERS | wc -w)
440 local FOUND=$(echo $CONTAINERS | grep -o true | wc -l)
441 if [ $TOTAL -eq $FOUND ]; then
442 for PATTERN in $PATTERNS; do
443 echo "TEST $PATTERN AGAINST $NAME" >> /tmp/t
444 if [[ $NAME =~ $PATTERN ]]; then
445 echo "COUNT $NAME" >> /tmp/t
446 COUNT=$(expr $COUNT + 1)
447 break
448 fi
449 done
450 fi
451 fi
452 done
453 echo $COUNT >> /tmp/t
454 echo $COUNT
455}
456
457wait_for_pods() {
458 local INDENT=
459 if [ "$1" == "-" ]; then
460 INDENT=$1; shift
461 fi
462 local NAMESPACE=$1; shift
463 local EXPECT=$1; shift
464 local TYPE=$1; shift
465 local RETRY=$1; shift
466 local MESSAGE=$1; shift
467 local PATTERNS=$*
David Bainbridge99ac7a22019-08-31 02:26:43 +0000468 local STATES=":Running:"
469 if [ "$TYPE" == "not" ]; then
470 STATES="*"
471 fi
472 local HAVE=$(count_pods $NAMESPACE "$STATES" $PATTERNS)
David Bainbridge4f1b5562019-08-19 04:46:52 +0000473 local ALL=$HAVE
474 if [ "$TYPE" == "only" ]; then
475 ALL=$(count_pods "all-namespaces" "*" ".*")
476 fi
477 COUNT=$(expr 300 / 15)
478 bspin $INDENT $MESSAGE
479 sspin $INDENT
480 if [ $HAVE -ne $EXPECT -o $ALL -ne $HAVE ]; then
481 while [ $HAVE -ne $EXPECT -o $ALL -ne $HAVE ]; do
482 sspin $INDENT
483 COUNT=$(expr $COUNT - 1)
484 if [ $COUNT -eq 0 ]; then
David Bainbridge99ac7a22019-08-31 02:26:43 +0000485 HAVE=$(count_pods $NAMESPACE "$STATES" $PATTERNS)
David Bainbridge4f1b5562019-08-19 04:46:52 +0000486 ALL=$HAVE
487 if [ "$TYPE" == "only" ]; then
488 ALL=$(count_pods "all-namespaces" "*" ".*")
489 fi
490 COUNT=$(expr 300 / 15)
491 fi
492 sleep .15
493 done
494 fi
495 espin $INDENT $VERIFIED
496 if [ $HAVE -ne $EXPECT ]; then
497 return 1
498 fi
499 return 0
500}
501
David Bainbridgeac7f8072019-08-01 22:15:33 +0000502if [ "$1" == "down" ]; then
David Bainbridge0774b232019-08-02 06:37:19 +0000503 echo "Tearing down voltha cluster $NAME"
504 LOG="down-$NAME.log"
505 echo $(date -u +"%Y%m%dT%H%M%SZ") >$LOG
David Bainbridgeac7f8072019-08-01 22:15:33 +0000506 if [ $DEPLOY_K8S == "yes" ]; then
507 if [ -x ./bin/kind ]; then
David Bainbridge0774b232019-08-02 06:37:19 +0000508 bspin "Delete Kubernetes Kind Cluster"
509 (set -x; ./bin/kind delete cluster --name voltha-$NAME >>$LOG 2>&1) >>$LOG 2>&1
510 espin $VERIFIED
David Bainbridgeac7f8072019-08-01 22:15:33 +0000511 else
David Bainbridge0774b232019-08-02 06:37:19 +0000512 espin "$NO_ENTRY Delete Kubernetes Kind Cluster: kind command not found"
David Bainbridgeac7f8072019-08-01 22:15:33 +0000513 fi
514 else
515 EXISTS=$(helm list -q)
516 EXPECT="etcd-operator onos open-olt open-onu sim voltha bbsim radius"
David Bainbridge0774b232019-08-02 06:37:19 +0000517 bspin "Remove Helm Deployments"
David Bainbridgeac7f8072019-08-01 22:15:33 +0000518 for i in $EXISTS; do
519 if [ $(echo $EXPECT | grep -c $i) -eq 1 ]; then
David Bainbridge0774b232019-08-02 06:37:19 +0000520 sspin "Remove Helm Deployments: $i$CEOL"
521 (set -x; ./bin/helm delete --purge $i >>$LOG 2>&1) >>$LOG 2>&1
David Bainbridgeac7f8072019-08-01 22:15:33 +0000522 fi
523 done
David Bainbridge0774b232019-08-02 06:37:19 +0000524 espin "$VERIFIED Remove Helm Deployments$CEOL"
David Bainbridge4f1b5562019-08-19 04:46:52 +0000525 if [ "$WAIT_ON_DOWN" == "yes" ]; then
526 # There should only be 13 or 15 PODs in the kube-system name
527 # space and no other PODs
David Bainbridge4f1b5562019-08-19 04:46:52 +0000528 PODS="coredns-.* \
529 etcd-voltha-$NAME-control-plane \
530 kindnet-.* \
531 kube-apiserver-voltha-$NAME-control-plane \
532 kube-controller-manager-voltha-$NAME-control-plane \
533 kube-proxy-.* \
534 kube-scheduler-voltha-$NAME-control-plane \
535 tiller-deploy-.*"
536 EXPECT=$(test "$TYPE" == "minimal" && echo "13" || echo "15")
David Bainbridge99ac7a22019-08-31 02:26:43 +0000537 PODS="adapter-.* \
538 bbsim.* \
539 etcd-operator.* \
540 radius.* \
541 voltha-.*"
542 EXPECT=0
543
544 wait_for_pods "voltha" $EXPECT "not" -1 "Waiting for VOLTHA PODs to terminate" $PODS
David Bainbridge4f1b5562019-08-19 04:46:52 +0000545 fi
David Bainbridgeac7f8072019-08-01 22:15:33 +0000546 fi
David Bainbridge0774b232019-08-02 06:37:19 +0000547 bspin "Remove port-forwards: onos-ui-$NAME"
548 for i in $(screen -ls | grep onos-ui-$NAME | awk '{print $1}'); do
549 sspin
550 (set -x; screen -X -S $i quit >>$LOG 2>&1) >>$LOG 2>&1
551 done
552 sspin "Remove port-forwards: onos-ssh-$NAME$CEOL"
553 for i in $(screen -ls | grep onos-ssh-$NAME | awk '{print $1}'); do
554 sspin
555 (set -x; screen -X -S $i quit >>$LOG 2>&1) >>$LOG 2>&1
556 done
557 sspin "Remove port-forwards: voltha-api-$NAME$CEOL"
558 for i in $(screen -ls | grep voltha-api-$NAME | awk '{print $1}'); do
559 sspin
560 (set -x; screen -X -S $i quit >>$LOG 2>&1) >>$LOG 2>&1
561 done
562 sspin "Remove port-forwards: voltha-ssh-$NAME$CEOL"
563 for i in $(screen -ls | grep voltha-ssh-$NAME | awk '{print $1}'); do
564 sspin
565 (set -x; screen -X -S $i quit >>$LOG 2>&1) >>$LOG 2>&1
566 done
567 sspin "Remove port-forwards: voltha-etcd-$NAME$CEOL"
568 for i in $(screen -ls | grep voltha-etcd-$NAME | awk '{print $1}'); do
569 sspin
570 (set -x; screen -X -S $i quit >>$LOG 2>&1) >>$LOG 2>&1
571 done
572 espin "$VERIFIED Remove port-forwards$CEOL"
David Bainbridgeac7f8072019-08-01 22:15:33 +0000573 exit
574fi
575
576if [ "$1" == "dump" ]; then
David Bainbridge0774b232019-08-02 06:37:19 +0000577 LOG="dump-$NAME.log"
David Bainbridgeac7f8072019-08-01 22:15:33 +0000578 TS=$(date -u +"%Y%m%dT%H%M%SZ")
579 WORK=$(mktemp -u -d)
David Bainbridge0774b232019-08-02 06:37:19 +0000580 DATA=$WORK/voltha-debug-dump-$NAME-$TS
David Bainbridgeac7f8072019-08-01 22:15:33 +0000581 mkdir -p $DATA
582 echo $TS > $LOG
David Bainbridge0774b232019-08-02 06:37:19 +0000583 echo -e "Capturing debug dump to voltha-debug-dump-$NAME-$TS.tgz"
David Bainbridgeac7f8072019-08-01 22:15:33 +0000584 bspin - "Copy install log"
David Bainbridge0774b232019-08-02 06:37:19 +0000585 if [ -f install-$NAME.log ]; then
586 (set -x; cp install-$NAME.log $DATA/install-$NAME.log) >>$LOG 2>&1
David Bainbridgeac7f8072019-08-01 22:15:33 +0000587 espin - $VERIFIED
588 else
David Bainbridge0774b232019-08-02 06:37:19 +0000589 espin - "$NO_ENTRY Copy install log: install-$NAME.log not found"
David Bainbridgeac7f8072019-08-01 22:15:33 +0000590 fi
591 bspin - "Dumping Kubernetes PODs"
592 (set -x; kubectl get --all-namespaces pods >> $DATA/all-pods.txt 2>&1) >>$LOG 2>&1
593 espin - $VERIFIED
594 bspin - "Dumping Kubernetes SERVICEs"
595 (set -x; kubectl get --all-namespaces svc >> $DATA/all-services.txt 2>&1) >>$LOG 2>&1
596 espin - $VERIFIED
597 bspin - "Dumping Kubernetes EVENTs"
598 (set -x; kubectl get --all-namespaces events >> $DATA/all-events.txt 2>&1) >>$LOG 2>&1
599 espin - $VERIFIED
600 bspin - "Dumping VOLTHA POD details"
David Bainbridge1f0655a2019-10-01 22:08:48 +0000601 PODS="$(kubectl -n default get pod -o name | grep onos | sed -e 's/^/default:/g') $(kubectl get -n voltha pod -o name | sed -e 's/^/voltha:/g')"
David Bainbridgecfd7ca12019-10-06 03:31:41 +0000602 SINCE=
603 if [ ! -z "$DUMP_FROM" ]; then
604 SINCE="--since-time=$DUMP_FROM"
605 fi
David Bainbridgeac7f8072019-08-01 22:15:33 +0000606 for POD in $PODS; do
David Bainbridge1f0655a2019-10-01 22:08:48 +0000607 NS=$(echo $POD | cut -d: -f1)
608 POD=$(echo $POD | cut -d: -f2)
David Bainbridgeac7f8072019-08-01 22:15:33 +0000609 sspin - "Dumping VOLTHA POD details: $POD$CEOL"
610 mkdir -p $DATA/$POD
David Bainbridge1f0655a2019-10-01 22:08:48 +0000611 (set -x; kubectl describe -n $NS $POD >> $DATA/$POD/describe.txt 2>&1) >>$LOG 2>&1
David Bainbridgeac7f8072019-08-01 22:15:33 +0000612 sspin - "Dumping VOLTHA POD details: $POD"
David Bainbridgecfd7ca12019-10-06 03:31:41 +0000613 (set -x; kubectl logs -n $NS --all-containers $SINCE --previous $LOG_ARGS $POD >> $DATA/$POD/logs-previous.txt 2>&1) >>$LOG 2>&1
David Bainbridgeac7f8072019-08-01 22:15:33 +0000614 sspin - "Dumping VOLTHA POD details: $POD"
David Bainbridgecfd7ca12019-10-06 03:31:41 +0000615 (set -x; kubectl logs -n $NS --all-containers $SINCE $LOG_ARGS $POD >> $DATA/$POD/logs-current.txt 2>&1) >>$LOG 2>&1
David Bainbridgeac7f8072019-08-01 22:15:33 +0000616 sspin - "Dumping VOLTHA POD details: $POD"
617 done
618 espin - "$VERIFIED Dumping VOLTHA POD details$CEOL"
619 bspin - "Dumping ETCD"
620 if [ "$(which etcdctl) X" != " X" ]; then
David Bainbridge0774b232019-08-02 06:37:19 +0000621 (set -x; ETCDCTL_API=3 etcdctl --endpoints localhost:$VOLTHA_ETCD_PORT get --prefix service/voltha | hexdump -C >> $DATA/etcd.hex 2>&1) >>$LOG 2>&1
David Bainbridgeac7f8072019-08-01 22:15:33 +0000622 espin - $VERIFIED
623 else
624 espin - "$NO_ENTRY Dumping ETCD: etcdctl command not available"
625 fi
David Bainbridge0774b232019-08-02 06:37:19 +0000626 bspin - "Creating compressed TAR: voltha-debug-dump-$NAME-$TS.tgz"
627 (set -x; tar -C $WORK -zcf voltha-debug-dump-$NAME-$TS.tgz ./voltha-debug-dump-$NAME-$TS) >>$LOG 2>&1
David Bainbridgeac7f8072019-08-01 22:15:33 +0000628 espin - $VERIFIED
629 bspin - "Cleanup"
630 (set -x; rm -rf $WORK) >>$LOG 2>&1
631 espin - $VERIFIED
David Bainbridge0774b232019-08-02 06:37:19 +0000632 bspin - "$(ls -l voltha-debug-dump-$NAME-$TS.tgz)"
David Bainbridgeac7f8072019-08-01 22:15:33 +0000633 espin - $VERIFIED
634 exit
635fi
636
David Bainbridge0774b232019-08-02 06:37:19 +0000637LOG="install-$NAME.log"
David Bainbridgeac7f8072019-08-01 22:15:33 +0000638date > $LOG
David Bainbridge0774b232019-08-02 06:37:19 +0000639echo "PORTS=$ONOS_API_PORT,$ONOS_SSH_PORT,$VOLTHA_API_PORT,$VOLTHA_SSH_PORT,$VOLTHA_ETCD_PORT" >> $LOG
David Bainbridgeac7f8072019-08-01 22:15:33 +0000640
641# Output install options to log
642echo "OPTIONS" >> $LOG
David Bainbridgeac7f8072019-08-01 22:15:33 +0000643for O in $ALL_OPTIONS; do
644 VAL=$(eval echo \$$O)
David Bainbridgeac7f8072019-08-01 22:15:33 +0000645 if [ ! -z "$VAL" ]; then
646 printf " %-30s = %s\n" $O $VAL >> $LOG
647 fi
648done
649
David K. Bainbridgeb7285432019-07-02 22:05:24 -0700650helm_install() {
651 local INDENT=
652 if [ "$1" == "-" ]; then
653 INDENT=$1; shift
654 fi
655 local NAMESPACE=$1; shift
David Bainbridge0774b232019-08-02 06:37:19 +0000656 local INAME=$1; shift
David K. Bainbridgeb7285432019-07-02 22:05:24 -0700657 local CHART=$1; shift
David Bainbridge90fd8e32019-08-21 23:32:47 +0000658 local CHART_VERSION=$1; shift
David K. Bainbridgeb7285432019-07-02 22:05:24 -0700659 local MESSAGE=$*
660
David Bainbridge90fd8e32019-08-21 23:32:47 +0000661 if [ "$CHART_VERSION X" != " X" -a "$CHART_VERSION" != "latest" ]; then
662 CHART_VERSION="--version $CHART_VERSION"
663 else
664 CHART_VERSION=
665 fi
666
David Bainbridge99ac7a22019-08-31 02:26:43 +0000667 local CHART_ARGS=
668 if [ -r "${INAME}-values.yaml" ]; then
669 CHART_ARGS="-f ${INAME}-values.yaml"
670 fi
671
David K. Bainbridgeb7285432019-07-02 22:05:24 -0700672 COUNT=$(expr 300 / 15)
673 bspin $INDENT $MESSAGE
David Bainbridge99ac7a22019-08-31 02:26:43 +0000674 (set -x; helm install -f $NAME-values.yaml $CHART_ARGS --set defaults.log_level=$VOLTHA_LOG_LEVEL --namespace $NAMESPACE --name $INAME $CHART_VERSION $EXTRA_HELM_FLAGS $CHART >>$LOG 2>&1) >>$LOG 2>&1
David K. Bainbridgeb7285432019-07-02 22:05:24 -0700675 SUCCESS=$?
676 while [ $SUCCESS -ne 0 ]; do
677 sspin $INDENT
678 COUNT=$(expr $COUNT - 1)
679 if [ $COUNT -eq 0 ]; then
David Bainbridge99ac7a22019-08-31 02:26:43 +0000680 (set -x; helm install -f $NAME-values.yaml $CHART_ARGS --set defaults.log_level=$VOLTHA_LOG_LEVEL --namespace $NAMESPACE --name $INAME $CHART_VERSION $EXTRA_HELM_FLAGS $CHART >>$LOG 2>&1) >>$LOG 2>&1
David K. Bainbridgeb7285432019-07-02 22:05:24 -0700681 COUNT=$(expr 300 / 15)
682 fi
683 sleep .15
684 done
685 espin $INDENT $VERIFIED
686}
687
David K. Bainbridgeb7285432019-07-02 22:05:24 -0700688echo "INSTALL TYPE: $TYPE" >> $LOG
689
690bspin "Verify GOPATH"
691export GOPATH=$(pwd)
Test User3d7ad8e2019-07-03 06:15:44 +0000692mkdir -p $GOPATH/bin
David K. Bainbridgeb7285432019-07-02 22:05:24 -0700693espin $VERIFIED
694
David Bainbridgee87067b2019-08-12 22:00:12 +0000695STIME=$(date +%s)
David K. Bainbridge0e89cb92019-07-17 11:30:10 -0700696if [ "$INSTALL_KUBECTL" == "no" ]; then
697 bspin "Skip kubectl install"
698 espin $NO_ENTRY
Test Userc13bdc92019-07-03 20:57:49 +0000699else
David K. Bainbridge0e89cb92019-07-17 11:30:10 -0700700 bspin "Verify kubectl $HELM"
701 if [ -x $GOPATH/bin/kubectl ]; then
702 espin $VERIFIED
703 else
704 espin $NOT_VERIFIED
705 bspin - "Download and install Kubernetes/kubectl $DOWNLOAD"
706 (set -x; curl -o $GOPATH/bin/kubectl -sSL https://storage.googleapis.com/kubernetes-release/release/$(curl -s https://storage.googleapis.com/kubernetes-release/release/stable.txt)/bin/$HOSTOS/$HOSTARCH/kubectl >>$LOG 2>&1) >>$LOG 2>&1
707 (set -x; chmod 755 $GOPATH/bin/kubectl >>$LOG 2>&1) >>$LOG 2>&1
708 espin - $VERIFIED
709 fi
Test Userc13bdc92019-07-03 20:57:49 +0000710fi
David Bainbridgee87067b2019-08-12 22:00:12 +0000711if [ "$WITH_TIMINGS" == "yes" ]; then
David Bainbridge712afb82019-08-14 19:55:58 +0000712 printtime $(expr $(date +%s) - $STIME)
David Bainbridgee87067b2019-08-12 22:00:12 +0000713fi
Test Userc13bdc92019-07-03 20:57:49 +0000714
David Bainbridgee87067b2019-08-12 22:00:12 +0000715STIME=$(date +%s)
David K. Bainbridge0e89cb92019-07-17 11:30:10 -0700716if [ "$DEPLOY_K8S" == "no" ]; then
717 bspin "Skip Kubernetes/Kind Deployment"
718 espin $NO_ENTRY
719else
Test Userba1e7e72019-07-10 22:27:54 +0000720 bspin "Verify Kubernetes/Kind $HELM"
721 if [ -x $GOPATH/bin/kind ]; then
722 espin $VERIFIED
723 else
724 espin $NOT_VERIFIED
725 bspin - "Download and install Kubernetes/kind $DOWNLOAD"
David Bainbridge9e2a6662019-07-11 17:07:57 +0000726 (set -x; curl -o $GOPATH/bin/kind -sSL https://github.com/kubernetes-sigs/kind/releases/download/$KIND_VERSION/kind-$HOSTOS-$HOSTARCH >>$LOG 2>&1) >>$LOG 2>&1
Test Userba1e7e72019-07-10 22:27:54 +0000727 (set -x; chmod 755 $GOPATH/bin/kind >>$LOG 2>&1) >>$LOG 2>&1
728 espin - $VERIFIED
729 fi
David K. Bainbridgeb7285432019-07-02 22:05:24 -0700730fi
731
David Bainbridgee87067b2019-08-12 22:00:12 +0000732if [ "$WITH_TIMINGS" == "yes" ]; then
David Bainbridge712afb82019-08-14 19:55:58 +0000733 printtime $(expr $(date +%s) - $STIME)
David Bainbridgee87067b2019-08-12 22:00:12 +0000734fi
735
736STIME=$(date +%s)
David K. Bainbridge0e89cb92019-07-17 11:30:10 -0700737if [ "$INSTALL_HELM" == "no" ]; then
738 bspin "Skip Helm Install"
739 espin $NO_ENTRY
David K. Bainbridgeb7285432019-07-02 22:05:24 -0700740else
David K. Bainbridge0e89cb92019-07-17 11:30:10 -0700741 bspin "Verify Helm $HELM"
742 if [ -x $GOPATH/bin/helm ]; then
743 espin $VERIFIED
744 else
745 espin $NOT_VERIFIED
746 bspin - "Download and install Helm $DOWNLOAD"
747 (set -x; curl -sSL https://git.io/get_helm.sh | USE_SUDO=false HELM_INSTALL_DIR=$GOPATH/bin bash >>$LOG 2>&1) >>$LOG 2>&1
748 espin - $VERIFIED
749 fi
David K. Bainbridgeb7285432019-07-02 22:05:24 -0700750fi
David Bainbridgee87067b2019-08-12 22:00:12 +0000751if [ "$WITH_TIMINGS" == "yes" ]; then
David Bainbridge712afb82019-08-14 19:55:58 +0000752 printtime $(expr $(date +%s) - $STIME)
David Bainbridgee87067b2019-08-12 22:00:12 +0000753fi
David K. Bainbridgeb7285432019-07-02 22:05:24 -0700754
David Bainbridgee87067b2019-08-12 22:00:12 +0000755STIME=$(date +%s)
Test Userb5712372019-07-03 21:52:17 +0000756bspin "Verify voltctl $HIGH_VOLTAGE"
Test User3d7ad8e2019-07-03 06:15:44 +0000757if [ -x $GOPATH/bin/voltctl ]; then
David K. Bainbridgeb7285432019-07-02 22:05:24 -0700758 espin $VERIFIED
759else
760 espin $NOT_VERIFIED
David Bainbridge99ac7a22019-08-31 02:26:43 +0000761 bspin - "Download and install voltctl $DOWNLOAD"
Test Userba1e7e72019-07-10 22:27:54 +0000762 (set -x; curl -o $GOPATH/bin/voltctl -sSL https://github.com/ciena/voltctl/releases/download/$VOLTCTL_VERSION/voltctl-$_VOLTCTL_VERSION-$HOSTOS-$HOSTARCH >>$LOG 2>&1) >>$LOG 2>&1
Test User08ebbd92019-07-03 17:15:39 +0000763 (set -x; chmod 755 $GOPATH/bin/voltctl >>$LOG 2>&1) >>$LOG 2>&1
David K. Bainbridgeb7285432019-07-02 22:05:24 -0700764 espin - $VERIFIED
765fi
David Bainbridgee87067b2019-08-12 22:00:12 +0000766if [ "$WITH_TIMINGS" == "yes" ]; then
David Bainbridge712afb82019-08-14 19:55:58 +0000767 printtime $(expr $(date +%s) - $STIME)
David Bainbridgee87067b2019-08-12 22:00:12 +0000768fi
David K. Bainbridgeb7285432019-07-02 22:05:24 -0700769
770bspin "Verify command PATH"
Test Userba1e7e72019-07-10 22:27:54 +0000771export PATH=$GOPATH/bin:$PATH
David K. Bainbridgeb7285432019-07-02 22:05:24 -0700772espin $VERIFIED
David K. Bainbridgeb7285432019-07-02 22:05:24 -0700773
David Bainbridgee87067b2019-08-12 22:00:12 +0000774STIME=$(date +%s)
Test Userba1e7e72019-07-10 22:27:54 +0000775if [ "$DEPLOY_K8S" == "yes" ]; then
David Bainbridge0774b232019-08-02 06:37:19 +0000776 HAVE=$(kind get clusters | grep -c voltha-$NAME)
Test Userba1e7e72019-07-10 22:27:54 +0000777 bspin "Verify Kubernetes/Kind Cluster"
778 sspin
779 if [ $HAVE -eq 0 ]; then
David Bainbridge491b1bd2019-07-11 17:53:11 +0000780 espin $NOT_VERIFIED
781 bspin - "Verify cluster configuration"
David Bainbridge0774b232019-08-02 06:37:19 +0000782 if [ ! -r ./$NAME-cluster.cfg ]; then
David Bainbridge491b1bd2019-07-11 17:53:11 +0000783 espin - $NOT_VERIFIED
David Bainbridge0774b232019-08-02 06:37:19 +0000784 bspin - "Download cluster configuration: $TYPE-cluster.cfg to $NAME-cluster.cfg $DOWNLOAD"
785 (set -x; curl -o ./$NAME-cluster.cfg -sSL https://raw.githubusercontent.com/ciena/kind-voltha/master/$TYPE-cluster.cfg >>$LOG 2>&1) >>$LOG 2>&1
David K. Bainbridge0e89cb92019-07-17 11:30:10 -0700786 espin - $VERIFIED
787 else
788 espin - $VERIFIED
789 fi
David Bainbridge0774b232019-08-02 06:37:19 +0000790 kind create cluster --name voltha-$NAME --config $NAME-cluster.cfg
David Bainbridge491b1bd2019-07-11 17:53:11 +0000791 else
792 espin $VERIFIED
Test Userba1e7e72019-07-10 22:27:54 +0000793 fi
794
David Bainbridge0774b232019-08-02 06:37:19 +0000795 export KUBECONFIG="$(kind get kubeconfig-path --name="voltha-$NAME")"
Test Userba1e7e72019-07-10 22:27:54 +0000796 P="coredns-.* \
David Bainbridge0774b232019-08-02 06:37:19 +0000797 etcd-voltha-$NAME-control-plane \
Test Userba1e7e72019-07-10 22:27:54 +0000798 kindnet-.* \
David Bainbridge0774b232019-08-02 06:37:19 +0000799 kube-apiserver-voltha-$NAME-control-plane \
800 kube-controller-manager-voltha-$NAME-control-plane \
Test Userba1e7e72019-07-10 22:27:54 +0000801 kube-proxy-.* \
David Bainbridge0774b232019-08-02 06:37:19 +0000802 kube-scheduler-voltha-$NAME-control-plane"
Test Userba1e7e72019-07-10 22:27:54 +0000803
804 EXPECT=$(test "$TYPE" == "minimal" && echo "12" || echo "14")
David Bainbridge4f1b5562019-08-19 04:46:52 +0000805 wait_for_pods - "kube-system" $EXPECT "includes" -1 "Waiting for system PODs to start" $P
David K. Bainbridgeb7285432019-07-02 22:05:24 -0700806fi
David Bainbridgee87067b2019-08-12 22:00:12 +0000807if [ "$WITH_TIMINGS" == "yes" ]; then
David Bainbridge712afb82019-08-14 19:55:58 +0000808 printtime $(expr $(date +%s) - $STIME)
David Bainbridgee87067b2019-08-12 22:00:12 +0000809fi
David K. Bainbridgeb7285432019-07-02 22:05:24 -0700810
David Bainbridgee87067b2019-08-12 22:00:12 +0000811STIME=$(date +%s)
David Bainbridge4c6289c2019-09-03 21:11:32 +0000812COUNT=$(count_pods "kube-system" ":Running:" "tiller-deploy-.*")
David K. Bainbridgeb7285432019-07-02 22:05:24 -0700813bspin "Verify Helm"
Test Userba1e7e72019-07-10 22:27:54 +0000814if [ $COUNT -ne 1 ]; then
David K. Bainbridgeb7285432019-07-02 22:05:24 -0700815 espin $NOT_VERIFIED
Test Userb5712372019-07-03 21:52:17 +0000816 echo -e "Configuring Helm $GEAR"
David K. Bainbridge0e89cb92019-07-17 11:30:10 -0700817 if [ "$INSTALL_HELM" == "no" ]; then
818 bspin - "Skip Helm/Tiller Initialization"
819 espin - $NO_ENTRY
820 else
821 bspin - "Initialize Helm"
822 (set -x; helm init --upgrade >>$LOG 2>&1) >>$LOG 2>&1
823 espin - $VERIFIED
David Bainbridge4f1b5562019-08-19 04:46:52 +0000824 wait_for_pods - "kube-system" 1 "includes" -1 "Waiting for Tiller POD to start" "tiller-deploy-.*"
David K. Bainbridge0e89cb92019-07-17 11:30:10 -0700825 fi
Test Userb5712372019-07-03 21:52:17 +0000826 bspin - "Add Google Incubator repository to Helm"
David K. Bainbridgeb7285432019-07-02 22:05:24 -0700827 (set -x; helm repo add incubator https://kubernetes-charts-incubator.storage.googleapis.com >>$LOG 2>&1) >>$LOG 2>&1
828 espin - $VERIFIED
Test Userba1e7e72019-07-10 22:27:54 +0000829
830 # HACK (sort-of) - the config for tiller is about to be patched, which will
831 # cause the tiller pod to be recreated. This can sometimes cause a timing
832 # issue with the "wait_for_pods" call on tiller as it may incorrectly
833 # identify the running/ready tiller pod that is soon to be terminated as
834 # what it is waiting for. To avoid this issue we do a clean scale down and
835 # scale up of the pod so the script controlls when it should be expecting
836 # things
837 (set -x; kubectl -n kube-system scale deploy tiller-deploy --replicas=0 >>$LOG 2>&1) >>$LOG 2>&1
David K. Bainbridgeb7285432019-07-02 22:05:24 -0700838
Test Userb5712372019-07-03 21:52:17 +0000839 bspin - "Add Google Stable repository to Helm"
David K. Bainbridgeb7285432019-07-02 22:05:24 -0700840 (set -x; helm repo add stable https://kubernetes-charts.storage.googleapis.com >>$LOG 2>&1) >>$LOG 2>&1
841 espin - $VERIFIED
Test Userb5712372019-07-03 21:52:17 +0000842 bspin - "Add ONF repository to Helm"
David K. Bainbridgeb7285432019-07-02 22:05:24 -0700843 (set -x; helm repo add onf https://charts.opencord.org >>$LOG 2>&1) >>$LOG 2>&1
844 espin - $VERIFIED
Test Userb5712372019-07-03 21:52:17 +0000845 bspin - "Update Helm repository cache"
David K. Bainbridgeb7285432019-07-02 22:05:24 -0700846 (set -x; helm repo update >>$LOG 2>&1) >>$LOG 2>&1
847 espin - $VERIFIED
848
849 # Create and k8s service account so that Helm can create pods
Test Userb5712372019-07-03 21:52:17 +0000850 bspin - "Create Tiller ServiceAccount"
David K. Bainbridgeb7285432019-07-02 22:05:24 -0700851 (set -x; kubectl create serviceaccount --namespace kube-system tiller >>$LOG 2>&1) >>$LOG 2>&1
852 espin - $VERIFIED
Test Userb5712372019-07-03 21:52:17 +0000853 bspin - "Create Tiller ClusterRoleBinding"
David K. Bainbridgeb7285432019-07-02 22:05:24 -0700854 (set -x; kubectl create clusterrolebinding tiller-cluster-rule --clusterrole=cluster-admin --serviceaccount=kube-system:tiller >>$LOG 2>&1) >>$LOG 2>&1
855 espin - $VERIFIED
Test Userb5712372019-07-03 21:52:17 +0000856 bspin - "Update Tiller Manifest"
David K. Bainbridgeb7285432019-07-02 22:05:24 -0700857 (set -x; kubectl patch deploy --namespace kube-system tiller-deploy -p '{"spec":{"template":{"spec":{"serviceAccount":"tiller"}}}}' >>$LOG 2>&1) >>$LOG 2>&1
Test Userba1e7e72019-07-10 22:27:54 +0000858
859 # HACK (sort-of) - part to, spin it back up
860 (set -x; kubectl -n kube-system scale deploy tiller-deploy --replicas=1 >>$LOG 2>&1) >>$LOG 2>&1
David K. Bainbridgeb7285432019-07-02 22:05:24 -0700861 espin - $VERIFIED
862else
863 espin $VERIFIED
David Bainbridge46505fb2019-10-01 21:13:20 +0000864 if [ "$UPDATE_HELM_REPOS" == "yes" ]; then
865 bspin - "Update Helm repository cache"
866 (set -x; helm repo update >>$LOG 2>&1) >>$LOG 2>&1
867 espin - $VERIFIED
868 fi
David K. Bainbridgeb7285432019-07-02 22:05:24 -0700869fi
David Bainbridge4f1b5562019-08-19 04:46:52 +0000870wait_for_pods - "kube-system" 1 "includes" -1 "Waiting for Tiller POD to start" "tiller-deploy-.*"
David Bainbridgee87067b2019-08-12 22:00:12 +0000871if [ "$WITH_TIMINGS" == "yes" ]; then
David Bainbridge712afb82019-08-14 19:55:58 +0000872 printtime $(expr $(date +%s) - $STIME)
David Bainbridgee87067b2019-08-12 22:00:12 +0000873fi
David K. Bainbridgeb7285432019-07-02 22:05:24 -0700874
David Bainbridgee87067b2019-08-12 22:00:12 +0000875STIME=$(date +%s)
David Bainbridge0774b232019-08-02 06:37:19 +0000876bspin "Verify Helm values file: $NAME-values.yaml"
877if [ ! -r "./$NAME-values.yaml" ]; then
Test Userba1e7e72019-07-10 22:27:54 +0000878 espin $NOT_VERIFIED
David Bainbridge0774b232019-08-02 06:37:19 +0000879 bspin - "Download Helm values file: $TYPE-values.yaml to $NAME-values.yaml $DOWNLOAD"
880 (set -x; curl -o ./$NAME-values.yaml -sSL https://raw.githubusercontent.com/ciena/kind-voltha/master/$TYPE-values.yaml >>$LOG 2>&1) >>$LOG 2>&1
Test Userba1e7e72019-07-10 22:27:54 +0000881 espin - $VERIFIED
882else
883 espin $VERIFIED
884fi
David Bainbridgee87067b2019-08-12 22:00:12 +0000885if [ "$WITH_TIMINGS" == "yes" ]; then
David Bainbridge712afb82019-08-14 19:55:58 +0000886 printtime $(expr $(date +%s) - $STIME)
David Bainbridgee87067b2019-08-12 22:00:12 +0000887fi
Test Userba1e7e72019-07-10 22:27:54 +0000888
David Bainbridge99ac7a22019-08-31 02:26:43 +0000889STIME=$(date +%s)
890bspin "Verify or download chart specific values files $DOWNLOAD"
891VALUES_FILES="monkey-values.yaml"
892for i in $VALUES_FILES; do
893 if [ ! -r ./$i ]; then
894 (set -x; curl -o ./$i -sSL https://raw.githubusercontent.com/ciena/kind-voltha/master/$i >>$LOG 2>&1) >>$LOG 2>&1
895 fi
896done
897espin $VERIFIED
898if [ "$WITH_TIMINGS" == "yes" ]; then
899 printtime $(expr $(date +%s) - $STIME)
900fi
901
902if [ "$WITH_CHAOS" == "yes" ]; then
903 bspin "Verify or clone kube-monkey helm chart $DOWNLOAD"
904 if [ -r ./kube-monkey ]; then
905 espin $VERIFIED
906 else
907 espin $NOT_VERIFIED
908 bspin - "GIT clone kube-monkey"
909 (set -x; git clone https://github.com/asobti/kube-monkey kube-monkey >>$LOG 2>&1) >>$LOG 2>&1
910 espin - $VERIFIED
911 fi
912fi
913
Test Userba1e7e72019-07-10 22:27:54 +0000914if [ "$JUST_K8S" == "yes" ]; then
915 echo "Environment deployed, not deploying VOLTHA artifacts as requested. Good bye."
916 echo ""
917 echo "Please issue the following commands in your terminal to ensure that you" | tee -a $LOG
918 echo "are accessing the correct Kubernetes/Kind cluster as well as have the " | tee -a $LOG
919 echo "tools required by VOLTHA in your command path. " | tee -a $LOG
920 echo "" | tee -a $LOG
921 echo -en $BOLD
922 if [ $DEPLOY_K8S == "yes" ]; then
David Bainbridge0774b232019-08-02 06:37:19 +0000923 echo "export KUBECONFIG=\"\$(./bin/kind get kubeconfig-path --name=\"voltha-$NAME\")\"" | tee -a $LOG
Test Userba1e7e72019-07-10 22:27:54 +0000924 fi
925 echo "export PATH=$GOPATH/bin:\$PATH" | tee -a $LOG
926 echo -en $NORMAL
927 echo "" | tee -a $LOG
928 echo "Thank you for choosing kind-voltha for you quick cluster needs." | tee -a $LOG
929 exit 0
930fi
931
David Bainbridgee87067b2019-08-12 22:00:12 +0000932STIME=$(date +%s)
Test Userb5712372019-07-03 21:52:17 +0000933bspin "Verify ETCD Operator $OLD_KEY"
Test User7d866122019-07-09 17:52:35 +0000934if [ $(helm list --deployed --short --namespace voltha "^etcd-operator\$" | wc -l) -ne 1 ]; then
David K. Bainbridgeb7285432019-07-02 22:05:24 -0700935 espin $NOT_VERIFIED
David Bainbridge90fd8e32019-08-21 23:32:47 +0000936 helm_install - voltha etcd-operator stable/etcd-operator latest "Install ETCD Operator"
David K. Bainbridgeb7285432019-07-02 22:05:24 -0700937else
938 espin $VERIFIED
939fi
Test User01ed0642019-07-03 20:17:06 +0000940EXPECT=$(test "$TYPE" == "minimal" && echo "1" || echo "3")
David Bainbridge4f1b5562019-08-19 04:46:52 +0000941wait_for_pods - "voltha" $EXPECT "includes" -1 "Waiting for ETCD Operator to start" "etcd-operator-.*"
David Bainbridgee87067b2019-08-12 22:00:12 +0000942if [ "$WITH_TIMINGS" == "yes" ]; then
David Bainbridge712afb82019-08-14 19:55:58 +0000943 printtime $(expr $(date +%s) - $STIME)
David Bainbridgee87067b2019-08-12 22:00:12 +0000944fi
David K. Bainbridgeb7285432019-07-02 22:05:24 -0700945
David Bainbridgee87067b2019-08-12 22:00:12 +0000946STIME=$(date +%s)
David Bainbridgeb270c202019-07-26 01:44:42 +0000947if [ $WITH_ONOS == "yes" ]; then
948 bspin "Verify ONOS installed $BIRD"
949 if [ $(helm list --deployed --short --namespace default "^onos\$" | wc -l) -ne 1 ]; then
950 espin $NOT_VERIFIED
David Bainbridge90fd8e32019-08-21 23:32:47 +0000951 EXTRA_HELM_FLAGS="$SET_TAG $EXTRA_HELM_FLAGS" helm_install - default onos onf/onos latest "Install ONOS"
David Bainbridgeb270c202019-07-26 01:44:42 +0000952 else
953 espin $VERIFIED
954 fi
David Bainbridge4f1b5562019-08-19 04:46:52 +0000955 wait_for_pods - "default" 1 "includes" -1 "Waiting for ONOS to start" "onos-.*"
David Bainbridgeb270c202019-07-26 01:44:42 +0000956
957 bspin - "Forward ONOS API port $FORWARD"
David Bainbridge0774b232019-08-02 06:37:19 +0000958 for i in $(screen -ls | grep onos-ui-$NAME | awk '{print $1}'); do
David Bainbridge82bd1212019-07-29 19:19:31 +0000959 (set -x; screen -X -S $i quit >>$LOG 2>&1) >>$LOG 2>&1
960 done
David Bainbridge0774b232019-08-02 06:37:19 +0000961 (set -x; screen -dmS onos-ui-$NAME bash -c "while true; do kubectl port-forward service/onos-ui $ONOS_API_PORT:8181; done" >>$LOG 2>&1) >>$LOG 2>&1
David Bainbridgeb270c202019-07-26 01:44:42 +0000962 espin - $VERIFIED
963 bspin - "Forward ONOS SSH port $FORWARD"
David Bainbridge0774b232019-08-02 06:37:19 +0000964 for i in $(screen -ls | grep onos-ssh-$NAME | awk '{print $1}'); do
David Bainbridge82bd1212019-07-29 19:19:31 +0000965 (set -x; screen -X -S $i quit >>$LOG 2>&1) >>$LOG 2>&1
966 done
David Bainbridge2b19e832019-08-16 02:40:53 +0000967
968
David Bainbridge0774b232019-08-02 06:37:19 +0000969 (set -x; screen -dmS onos-ssh-$NAME bash -c "while true; do kubectl port-forward service/onos-ssh $ONOS_SSH_PORT:8101; done" >>$LOG 2>&1) >>$LOG 2>&1
David Bainbridgeb270c202019-07-26 01:44:42 +0000970 espin - $VERIFIED
David Bainbridged31d6122019-08-13 19:37:59 +0000971 bspin - "Verify or download ONOS configuration support files $DOWNLOAD"
David Bainbridge2b19e832019-08-16 02:40:53 +0000972 ONOS_FILES="olt-onos-enableExtraneousRules.json olt-onos-olt-settings.json onos-aaa.json \
David Bainbridge90fd8e32019-08-21 23:32:47 +0000973 onos-dhcpl2relay.json onos-kafka.json onos-sadis-sample.json"
David Bainbridged31d6122019-08-13 19:37:59 +0000974 (set -x; mkdir -p ./onos-files >>$LOG 2>&1) >>$LOG 2>&1
David Bainbridge2b19e832019-08-16 02:40:53 +0000975 for i in $ONOS_FILES; do
David Bainbridged31d6122019-08-13 19:37:59 +0000976 if [ ! -r ./onos-files/$i ]; then
977 (set -x; curl -o ./onos-files/$i -sSL https://raw.githubusercontent.com/ciena/kind-voltha/master/onos-files/$i >>$LOG 2>&1) >>$LOG 2>&1
978 fi
979 done
Test Userba1e7e72019-07-10 22:27:54 +0000980 espin - $VERIFIED
David Bainbridge27790d62019-08-13 22:43:19 +0000981
982 if [ $INSTALL_ONOS_APPS == "yes" ]; then
983 bspin - "Installing custom ONOS applications"
984 if [ -x onos-files/onos-apps -a $(ls -1 onos-files/onos-apps/*.oar 2>/dev/null | wc -l) -gt 0 ]; then
985 for OAR in $(ls -1 onos-files/onos-apps/*.oar); do
986 sspin - "Installing custom ONOS applications - $OAR$CEOL"
David Bainbridge2b19e832019-08-16 02:40:53 +0000987 override_onos_app $OAR
David Bainbridge27790d62019-08-13 22:43:19 +0000988 done
989 espin - "$VERIFIED Installing custom ONOS applications$CEOL"
990 else
991 espin - "$NOT_VERIFIED Installing custom ONOS applications - None Found"
992 fi
993 fi
David Bainbridge2b19e832019-08-16 02:40:53 +0000994
995 push_onos_config "Push ONOS Kafka Configuration" "network/configuration/apps/org.opencord.kafka" "onos-files/onos-kafka.json"
996 push_onos_config "Push ONOS DHCP L2 Relay Configuration" "network/configuration/apps/org.opencord.dhcpl2relay" "onos-files/onos-dhcpl2relay.json"
David Bainbridged31d6122019-08-13 19:37:59 +0000997 push_onos_config "Enable VOLTHA ONOS DHCP provisioning" "configuration/org.opencord.olt.impl.Olt" "onos-files/olt-onos-olt-settings.json"
998 push_onos_config "Enabling extraneous rules for ONOS" "configuration/org.onosproject.net.flow.impl.FlowRuleManager" "onos-files/olt-onos-enableExtraneousRules.json"
David Bainbridge2b19e832019-08-16 02:40:53 +0000999 if [ -f onos-files/onos-sadis.json ]; then
1000 push_onos_config "[optional] Push ONOS SADIS Configuration" "network/configuration/apps/org.opencord.sadis" "onos-files/onos-sadis.json"
1001 elif [ "$CONFIG_SADIS" == "yes" ]; then
David Bainbridge90fd8e32019-08-21 23:32:47 +00001002 SADIS_CFG=onos-files/onos-sadis-sample.json
David Bainbridge2b19e832019-08-16 02:40:53 +00001003 push_onos_config "[optional] Push ONOS SADIS Configuration" "network/configuration/apps/org.opencord.sadis" "$SADIS_CFG"
1004 fi
Test Userba1e7e72019-07-10 22:27:54 +00001005fi
David Bainbridgee87067b2019-08-12 22:00:12 +00001006if [ "$WITH_TIMINGS" == "yes" ]; then
David Bainbridge712afb82019-08-14 19:55:58 +00001007 printtime $(expr $(date +%s) - $STIME)
David Bainbridgee87067b2019-08-12 22:00:12 +00001008fi
Test Userba1e7e72019-07-10 22:27:54 +00001009
David Bainbridgee87067b2019-08-12 22:00:12 +00001010STIME=$(date +%s)
Test Userb5712372019-07-03 21:52:17 +00001011bspin "Verify VOLTHA installed $HIGH_VOLTAGE"
Test User7d866122019-07-09 17:52:35 +00001012if [ $(helm list --deployed --short --namespace voltha "^voltha\$" | wc -l) -ne 1 ]; then
David K. Bainbridgeb7285432019-07-02 22:05:24 -07001013 espin $NOT_VERIFIED
David Bainbridge90fd8e32019-08-21 23:32:47 +00001014 helm_install - voltha voltha $VOLTHA_CHART $VOLTHA_CHART_VERSION "Install VOLTHA Core"
David K. Bainbridgeb7285432019-07-02 22:05:24 -07001015else
1016 espin $VERIFIED
1017fi
Test Userba1e7e72019-07-10 22:27:54 +00001018
David Bainbridge90fd8e32019-08-21 23:32:47 +00001019VOLTHA="voltha-ofagent-.* \
David K. Bainbridgeb7285432019-07-02 22:05:24 -07001020 ro-core.* \
1021 rw-core.* \
1022 voltha-api-server-.* \
1023 voltha-cli-server-.* \
1024 voltha-etcd-cluster-.* \
1025 voltha-kafka-.* \
1026 voltha-zookeeper-.*"
David Bainbridge46505fb2019-10-01 21:13:20 +00001027#EXPECT=$(test "$TYPE" == "minimal" && echo "8" || echo "11")
Test User01ed0642019-07-03 20:17:06 +00001028EXPECT=$(test "$TYPE" == "minimal" && echo "9" || echo "11")
David Bainbridge4f1b5562019-08-19 04:46:52 +00001029wait_for_pods - "voltha" $EXPECT "includes" -1 "Waiting for VOLTHA Core to start" $VOLTHA
David Bainbridgee87067b2019-08-12 22:00:12 +00001030if [ "$WITH_TIMINGS" == "yes" ]; then
David Bainbridge712afb82019-08-14 19:55:58 +00001031 printtime $(expr $(date +%s) - $STIME)
David Bainbridgee87067b2019-08-12 22:00:12 +00001032fi
David K. Bainbridgeb7285432019-07-02 22:05:24 -07001033
David Bainbridge46505fb2019-10-01 21:13:20 +00001034if [ "$WITH_ADAPTERS" == "yes" ]; then
1035 STIME=$(date +%s)
1036 EXPECT=0
1037 echo -e "Verify Adapters $PLUG"
1038 if [ "$WITH_SIM_ADAPTERS" == "yes" ]; then
1039 bspin - "Verify Simulated Adapters installed"
1040 if [ $(helm list --deployed --short --namespace voltha "^sim\$" | wc -l) -ne 1 ]; then
1041 espin - $NOT_VERIFIED
1042 helm_install - voltha sim $VOLTHA_ADAPTER_SIM_CHART $VOLTHA_ADAPTER_SIM_CHART_VERSION "Install Simulated Adapters"
1043 else
1044 espin - $VERIFIED
1045 fi
1046 EXPECT=$(expr $EXPECT + 2)
1047 fi
1048
1049 if [ "$WITH_OPEN_ADAPTERS" == "yes" ]; then
1050 bspin - "Verify OpenOLT Adapter installed"
1051 if [ $(helm list --deployed --short --namespace voltha "^open-olt\$" | wc -l) -ne 1 ]; then
1052 espin - $NOT_VERIFIED
1053 helm_install - voltha open-olt $VOLTHA_ADAPTER_OPEN_OLT_CHART $VOLTHA_ADAPTER_OPEN_OLT_CHART_VERSION "Install OpenOLT Adapter"
1054 else
1055 espin - $VERIFIED
1056 fi
1057 bspin - "Verify OpenONU Adapter installed"
1058 if [ $(helm list --deployed --short --namespace voltha "^open-onu\$" | wc -l) -ne 1 ]; then
1059 espin - $NOT_VERIFIED
1060 helm_install - voltha open-onu $VOLTHA_ADAPTER_OPEN_ONU_CHART $VOLTHA_ADAPTER_OPEN_ONU_CHART_VERSION "Install OpenONU Adapter"
1061 else
1062 espin - $VERIFIED
1063 fi
1064 EXPECT=$(expr $EXPECT + 2)
1065 fi
1066
1067 ADAPTERS="adapter-.*"
1068 wait_for_pods - "voltha" $EXPECT "includes" -1 "Waiting for adapters to start" $ADAPTERS
1069 if [ "$WITH_TIMINGS" == "yes" ]; then
1070 printtime $(expr $(date +%s) - $STIME)
1071 fi
David Bainbridgee87067b2019-08-12 22:00:12 +00001072fi
David K. Bainbridgeb7285432019-07-02 22:05:24 -07001073
Test User7d866122019-07-09 17:52:35 +00001074if [ $WITH_BBSIM == "yes" ]; then
David Bainbridgee87067b2019-08-12 22:00:12 +00001075 STIME=$(date +%s)
Test User7d866122019-07-09 17:52:35 +00001076 echo -e "Verify BBSIM $PLUG"
David Bainbridge5b7b96b2019-07-25 20:29:13 +00001077 bspin - "Verify BBSIM Installed"
Test User7d866122019-07-09 17:52:35 +00001078 if [ $(helm list --deployed --short --namespace voltha "^bbsim\$" | wc -l) -ne 1 ]; then
1079 espin - $NOT_VERIFIED
David Bainbridge90fd8e32019-08-21 23:32:47 +00001080 helm_install - voltha bbsim $VOLTHA_BBSIM_CHART $VOLTHA_BBSIM_CHART_VERSION "Install BBSIM"
Test User7d866122019-07-09 17:52:35 +00001081 else
1082 espin - $VERIFIED
1083 fi
David Bainbridge4f1b5562019-08-19 04:46:52 +00001084 wait_for_pods - "voltha" 1 "includes" -1 "Waiting for BBSIM to start" "bbsim-.*"
David Bainbridgee87067b2019-08-12 22:00:12 +00001085 if [ "$WITH_TIMINGS" == "yes" ]; then
David Bainbridge712afb82019-08-14 19:55:58 +00001086 printtime $(expr $(date +%s) - $STIME)
David Bainbridgee87067b2019-08-12 22:00:12 +00001087 fi
Test User7d866122019-07-09 17:52:35 +00001088fi
1089
David Bainbridge5b7b96b2019-07-25 20:29:13 +00001090if [ $WITH_RADIUS == "yes" ]; then
David Bainbridgee87067b2019-08-12 22:00:12 +00001091 STIME=$(date +%s)
David Bainbridge5b7b96b2019-07-25 20:29:13 +00001092 echo -e "Verify RADIUS $LOCK"
1093 bspin - "Verify RADIUS Installed"
1094 if [ $(helm list --deployed --short --namespace voltha "^radius\$" | wc -l) -ne 1 ]; then
1095 espin - $NOT_VERIFIED
David Bainbridge90fd8e32019-08-21 23:32:47 +00001096 helm_install - voltha radius onf/freeradius latest "Install RADIUS"
David Bainbridge5b7b96b2019-07-25 20:29:13 +00001097 else
1098 espin - $VERIFIED
1099 fi
David Bainbridge4f1b5562019-08-19 04:46:52 +00001100 wait_for_pods - "voltha" 1 "includes" -1 "Waiting for RADIUS to start" "radius-.*"
David Bainbridgee87067b2019-08-12 22:00:12 +00001101 if [ "$WITH_TIMINGS" == "yes" ]; then
David Bainbridge712afb82019-08-14 19:55:58 +00001102 printtime $(expr $(date +%s) - $STIME)
David Bainbridgee87067b2019-08-12 22:00:12 +00001103 fi
David Bainbridge5b7b96b2019-07-25 20:29:13 +00001104fi
1105
David Bainbridgee87067b2019-08-12 22:00:12 +00001106STIME=$(date +%s)
David Bainbridgee10f6d52019-07-25 00:28:13 +00001107if [ $SKIP_RESTART_API == "no" ]; then
1108 echo -e "Restart VOLTHA API $RESTART"
David Bainbridge90fd8e32019-08-21 23:32:47 +00001109 API="voltha-api-server-.* voltha-ofagent-.*"
1110 (set -x; kubectl scale --replicas=0 deployment -n voltha voltha-api-server voltha-ofagent >>$LOG 2>&1) >>$LOG 2>&1
David Bainbridge4f1b5562019-08-19 04:46:52 +00001111 wait_for_pods - "voltha" 0 "includes" -1 "Wait for API to stop $STOP" $API
David Bainbridge90fd8e32019-08-21 23:32:47 +00001112 (set -x; kubectl scale --replicas=1 deployment -n voltha voltha-api-server voltha-ofagent >>$LOG 2>&1) >>$LOG 2>&1
David Bainbridge4f1b5562019-08-19 04:46:52 +00001113 wait_for_pods - "voltha" 2 "includes" -1 "Wait for API to re-start $GO" $API
David Bainbridgee10f6d52019-07-25 00:28:13 +00001114fi
David K. Bainbridgeb7285432019-07-02 22:05:24 -07001115
Test Userb5712372019-07-03 21:52:17 +00001116bspin - "Forward VOLTHA API port $FORWARD"
David Bainbridge0774b232019-08-02 06:37:19 +00001117for i in $(screen -ls | grep voltha-api-$NAME | awk '{print $1}'); do
David Bainbridge82bd1212019-07-29 19:19:31 +00001118 (set -x; screen -X -S $i quit >>$LOG 2>&1) >>$LOG 2>&1
1119done
David Bainbridge0774b232019-08-02 06:37:19 +00001120(set -x; screen -dmS voltha-api-$NAME bash -c "while true; do kubectl port-forward -n voltha service/voltha-api $VOLTHA_API_PORT:55555; done" >>$LOG 2>&1) >>$LOG 2>&1
David K. Bainbridgeb7285432019-07-02 22:05:24 -07001121espin - $VERIFIED
Test Userb5712372019-07-03 21:52:17 +00001122bspin - "Forward VOLTHA SSH port $FORWARD"
David Bainbridge0774b232019-08-02 06:37:19 +00001123for i in $(screen -ls | grep voltha-ssh-$NAME | awk '{print $1}'); do
David Bainbridge82bd1212019-07-29 19:19:31 +00001124 (set -x; screen -X -S $i quit >>$LOG 2>&1) >>$LOG 2>&1
1125done
David Bainbridge0774b232019-08-02 06:37:19 +00001126(set -x; screen -dmS voltha-ssh-$NAME bash -c "while true; do kubectl port-forward -n voltha service/voltha-cli $VOLTHA_SSH_PORT:5022; done" >>$LOG 2>&1) >>$LOG 2>&1
David K. Bainbridgeb7285432019-07-02 22:05:24 -07001127espin - $VERIFIED
David Bainbridgeac7f8072019-08-01 22:15:33 +00001128bspin - "Forward VOLTHA ETCD port $FORWARD"
David Bainbridge0774b232019-08-02 06:37:19 +00001129for i in $(screen -ls | grep voltha-etcd-$NAME | awk '{print $1}'); do
David Bainbridgeac7f8072019-08-01 22:15:33 +00001130 (set -x; screen -X -S $i quit >>$LOG 2>&1) >>$LOG 2>&1
1131done
David Bainbridge0774b232019-08-02 06:37:19 +00001132(set -x; screen -dmS voltha-etcd-$NAME bash -c "while true; do kubectl port-forward -n voltha service/voltha-etcd-cluster-client $VOLTHA_ETCD_PORT:2379; done" >>$LOG 2>&1) >>$LOG 2>&1
David Bainbridgeac7f8072019-08-01 22:15:33 +00001133espin - $VERIFIED
David Bainbridgee87067b2019-08-12 22:00:12 +00001134if [ "$WITH_TIMINGS" == "yes" ]; then
David Bainbridge712afb82019-08-14 19:55:58 +00001135 printtime $(expr $(date +%s) - $STIME)
David Bainbridgee87067b2019-08-12 22:00:12 +00001136fi
Test User3d7ad8e2019-07-03 06:15:44 +00001137
David Bainbridgeb270c202019-07-26 01:44:42 +00001138if [ $WITH_ONOS == "yes" -a $WITH_RADIUS == "yes" ]; then
David Bainbridge5b7b96b2019-07-25 20:29:13 +00001139 bspin "Configure ONOS RADIUS Connection $GEAR"
David Bainbridge2b19e832019-08-16 02:40:53 +00001140 (set -x; cat onos-files/onos-aaa.json | sed -e "s/:RADIUS_IP:/$(kubectl -n voltha get service/radius -o jsonpath={.spec.clusterIP})/g" | curl -XPOST -sSL http://karaf:karaf@localhost:8181/onos/v1/network/configuration/apps/org.opencord.aaa -H Content-type:application/json -d@- >>$LOG 2>&1) >>$LOG 2>&1
David Bainbridge5b7b96b2019-07-25 20:29:13 +00001141 espin $VERIFIED
1142fi
1143
David Bainbridge99ac7a22019-08-31 02:26:43 +00001144if [ "$WITH_CHAOS" == "yes" ]; then
1145 STIME=$(date +%s)
1146 echo -e "Verify kube-monkey $LOCK"
1147 bspin - "Verify kube-monkey Installed"
1148 if [ $(helm list --deployed --short --namespace kube-monkey "^monkey\$" | wc -l) -ne 1 ]; then
1149 espin - $NOT_VERIFIED
1150 helm_install - kube-monkey monkey ./kube-monkey/helm/kubemonkey latest "Install Chaos Monkey"
1151 else
1152 espin - $VERIFIED
1153 fi
1154 wait_for_pods - "kube-monkey" 1 "includes" -1 "Waiting for Chaos to start" "monkey-.*"
1155 if [ "$WITH_TIMINGS" == "yes" ]; then
1156 printtime $(expr $(date +%s) - $STIME)
1157 fi
1158fi
1159
David Bainbridge5b7b96b2019-07-25 20:29:13 +00001160bspin "Create voltctl configuration file"
Test User3d7ad8e2019-07-03 06:15:44 +00001161(set -x; mkdir -p $HOME/.volt >>$LOG 2>&1) >>$LOG 2>&1
David Bainbridge0774b232019-08-02 06:37:19 +00001162(set -x; voltctl -a v2 -s localhost:$VOLTHA_API_PORT config > $HOME/.volt/config-$NAME 2>>$LOG) >>$LOG 2>&1
David Bainbridge5b7b96b2019-07-25 20:29:13 +00001163espin $VERIFIED
Test User08ebbd92019-07-03 17:15:39 +00001164
David Bainbridge0774b232019-08-02 06:37:19 +00001165if [ ! -f "$NAME-env.sh" ]; then
1166 touch $NAME-env.sh
David Bainbridgeb07fdf72019-07-29 22:51:40 +00001167fi
1168
David Bainbridge596f30d2019-07-30 17:07:59 +00001169for O in $ALL_OPTIONS; do
1170 VAL=$(eval echo \$$O)
David Bainbridge0774b232019-08-02 06:37:19 +00001171 if [ ! -z "$VAL" -a $(grep -c "^export $O=" $NAME-env.sh) -eq 0 ]; then
1172 echo "export $O=\"$(eval echo \$$O)\"" >> $NAME-env.sh
David Bainbridgeb07fdf72019-07-29 22:51:40 +00001173 fi
1174done
1175
David Bainbridge0774b232019-08-02 06:37:19 +00001176if [ $DEPLOY_K8S == "yes" -a $(grep -c "^export KUBECONFIG=" $NAME-env.sh) -eq 0 ]; then
1177 echo "export KUBECONFIG=\"$(./bin/kind get kubeconfig-path --name=voltha-$NAME)\"" >> $NAME-env.sh
David Bainbridgeb07fdf72019-07-29 22:51:40 +00001178fi
1179
David Bainbridge0774b232019-08-02 06:37:19 +00001180if [ $(grep -c "^export VOLTCONFIG=" $NAME-env.sh) -eq 0 ]; then
1181 echo "export VOLTCONFIG=\"$HOME/.volt/config-$NAME\"" >> $NAME-env.sh
David Bainbridgeb07fdf72019-07-29 22:51:40 +00001182fi
1183
David Bainbridge0774b232019-08-02 06:37:19 +00001184if [ $(grep -c "^export PATH=" $NAME-env.sh) -eq 0 ]; then
1185 echo "export PATH=\"$GOPATH/bin:\$PATH\"" >> $NAME-env.sh
David Bainbridgeb07fdf72019-07-29 22:51:40 +00001186fi
1187
Test User7d866122019-07-09 17:52:35 +00001188echo ""
Test User08ebbd92019-07-03 17:15:39 +00001189echo "Please issue the following commands in your terminal to ensure that you" | tee -a $LOG
1190echo "are accessing the correct Kubernetes/Kind cluster as well as have the " | tee -a $LOG
1191echo "tools required by VOLTHA in your command path. " | tee -a $LOG
1192echo "" | tee -a $LOG
Test User7d866122019-07-09 17:52:35 +00001193echo -en $BOLD
Test Userba1e7e72019-07-10 22:27:54 +00001194if [ $DEPLOY_K8S == "yes" ]; then
David Bainbridge0774b232019-08-02 06:37:19 +00001195 echo "export KUBECONFIG=\"\$(./bin/kind get kubeconfig-path --name=\"voltha-$NAME\")\"" | tee -a $LOG
Test Userba1e7e72019-07-10 22:27:54 +00001196fi
David Bainbridge0774b232019-08-02 06:37:19 +00001197echo "export VOLTCONFIG=\"$HOME/.volt/config-$NAME\"" | tee -a $LOG
Test Userba1e7e72019-07-10 22:27:54 +00001198echo "export PATH=$GOPATH/bin:\$PATH" | tee -a $LOG
Test User7d866122019-07-09 17:52:35 +00001199echo -en $NORMAL
Test User08ebbd92019-07-03 17:15:39 +00001200echo "" | tee -a $LOG
1201echo "Thank you for choosing kind-voltha for you quick cluster needs." | tee -a $LOG
1202
David Bainbridge712afb82019-08-14 19:55:58 +00001203if [ "$WITH_TIMINGS" == "yes" ]; then
David Bainbridgef858a022019-08-14 21:25:11 +00001204 echo -e "$CLOCK ${BOLD}TOTAL: $(duration $(expr $(date +%s) - $TOTAL_START_TIME))${NORMAL}"
David Bainbridge712afb82019-08-14 19:55:58 +00001205fi
1206