| # Copyright 2019-present Open Networking Foundation |
| # |
| # SPDX-License-Identifier: Apache-2.0 |
| |
| # Originally created by Jim Knoble <jmknoble@mercury.interpath.net> |
| # Modified for Debian by alvar Bray <alvar@meiko.co.uk> |
| # Modified for PPP Server setup by Christoph Lameter <clameter@debian.org> |
| # Modified for SEBA in a Box by Open Networking Foundation |
| |
| # To quickly see what options are active in this file, use this command: |
| # egrep -v '#|^ *$' /etc/ppp/pppoe-options |
| |
| # Use the modem control lines. On Ultrix, this option implies hardware |
| # flow control, as for the crtscts option. (This option is not fully |
| # implemented.) |
| modem |
| |
| # If this option is given, pppd will send an LCP echo-request frame to the |
| # peer every n seconds. Normally the peer should respond to the echo-request |
| # by sending an echo-reply. This option can be used with the |
| # lcp-echo-failure option to detect that the peer is no longer connected. |
| lcp-echo-interval 5 |
| |
| # If this option is given, pppd will presume the peer to be dead if n |
| # LCP echo-requests are sent without receiving a valid LCP echo-reply. |
| # If this happens, pppd will terminate the connection. Use of this |
| # option requires a non-zero value for the lcp-echo-interval parameter. |
| # This option can be used to enable pppd to terminate after the physical |
| # connection has been broken (e.g., the modem has hung up) in |
| # situations where no hardware modem control lines are available. |
| lcp-echo-failure 12 |
| |
| # Disable the IPXCP and IPX protocols. |
| noipx |
| |
| # Disable negotiation of Van Jacobson style IP header compression (use |
| # default, i.e. no compression). |
| -vj |
| |
| # Specify which DNS Servers the incoming Win95 or WinNT Connection should use |
| # Two Servers can be remotely configured |
| ms-dns 8.8.8.8 |
| ms-dns 8.8.4.4 |
| |
| # Set the interface netmask to <n>, a 32 bit netmask in "decimal dot" |
| # notation (e.g. 255.255.255.0). |
| netmask 255.255.255.0 |
| |
| # Other options |
| asyncmap 0 |
| crtscts |
| lock |
| hide-password |
| require-chap |
| nobsdcomp |
| noccp |
| novj |
| |
| # Increase debugging level (same as -d). If this option is given, pppd |
| # will log the contents of all control packets sent or received in a |
| # readable form. The packets are logged through syslog with facility |
| # daemon and level debug. |
| debug |
| logfile /var/log/pppoe-server-log |