generated/voipapplicationserviceprofile.go

/*
 * Copyright (c) 2018 - present.  Boling Consulting Solutions (bcsw.net)
 * Copyright 2020-present Open Networking Foundation
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
/*
 * NOTE: This file was generated, manual edits will be overwritten!
 *
 * Generated by 'goCodeGenerator.py':
 *              https://github.com/cboling/OMCI-parser/README.md
 */

package generated

import "github.com/deckarep/golang-set"

// VoipApplicationServiceProfileClassID is the 16-bit ID for the OMCI
// Managed entity VoIP application service profile
const VoipApplicationServiceProfileClassID = ClassID(146) // 0x0092

var voipapplicationserviceprofileBME *ManagedEntityDefinition

// VoipApplicationServiceProfile (Class ID: #146 / 0x0092)
//	The VoIP application service profile defines attributes of calling features used in conjunction
//	with a VoIP line service. It is optional for ONUs that support VoIP services. If a non-OMCI
//	interface is used to manage SIP for VoIP, this ME is unnecessary.
//
//	An instance of this ME is created and deleted by the OLT. A VoIP application service profile
//	instance is needed for each unique set of profile attributes.
//
//	Relationships
//		An instance of this ME is associated with zero or more SIP user data MEs.
//
//	Attributes
//		Managed Entity Id
//			Managed entity ID:-This attribute uniquely identifies each instance of this ME. (R,-setbycreate)
//			(mandatory) (2 bytes)
//
//		Cid Features
//			This attribute contains a bit map of caller ID features. Except as noted, the bit value 0
//			disables the feature; 1 enables it.
//
//			0x01	Calling number
//
//			0x02	Calling name
//
//			0x04	CID blocking (both number and name)
//
//			0x08	CID number - Permanent presentation status for number (0 = public, 1 = private)
//
//			0x10	CID name - Permanent presentation status for name  (0 = public, 1 = private)
//
//			0x20	Anonymous CID blocking (ACR). It may not be possible to support this in the ONU.
//
//			0x40..0x80	Not used
//
//			The recommended default value is 0x00. (R, W, setbycreate) (mandatory) (1-byte)
//
//		Call Waiting Features
//			The recommended default value is 0x00. (R,-W, setbycreate) (mandatory) (1-byte)
//
//			This attribute contains a bit map of call waiting features. The bit value 0 disables the
//			feature; 1 enables it.
//
//			0x01	Call waiting
//
//			0x02	Caller ID announcement
//
//			0x04..0x80	Not used
//
//		Call Progress Or Transfer Features
//			This attribute is a bit map of call processing features. The bit value 0 disables the feature; 1
//			enables it.
//
//			0x0001	3way
//
//			0x0002	Call transfer
//
//			0x0004	Call hold
//
//			0x0008	Call park
//
//			0x0010	Do not disturb
//
//			0x0020	Flash on emergency service call (flash is to be processed during an emergency service
//			call)
//
//			0x0040	Emergency service originating hold (determines whether call clearing is to be performed
//			on on-hook during an emergency service call)
//
//			0x0080	6way
//
//			0x0100..0x8000	Not used
//
//			The recommended default value is 0x0000. (R, W, setbycreate) (mandatory) (2-bytes)
//
//		Call Presentation Features
//			This attribute is a bit map of call presentation features. The bit value 0 disables the feature;
//			1 enables it.
//
//			0x0001	Message waiting indication splash ring
//
//			0x0002	Message waiting indication special dial tone
//
//			0x0004	Message waiting indication visual indication
//
//			0x0008	Call forwarding indication
//
//			0x0010	DC voltage based visual message waiting indicator (vmwi) (e.g., neon lamp on a phone to
//			indicate a message waiting).  For backwards compatibility reasons, the value 0x0010 is a
//			companion value to 0x0004. If an ONU does not support DC voltage vmwi, the ONU uses other
//			existing vmwi methods. If the ONU supports DC voltage vmwi and needs to apply DC voltage to turn
//			on the phone lamp (to indicate message waiting), the values 0x0004 and 0x0010 are set.
//
//			0x0020..0x8000	Not used
//
//			The recommended default value is 0x0000. (R,-W, setbycreate) (mandatory) (2-bytes)
//
//		Direct Connect Feature
//			This attribute is a bit map of characteristics associated with the direct connect feature. The
//			bit value 0 disables the feature; 1 enables it.
//
//			0x01	Direct connect feature enabled
//
//			0x02	Dial tone feature delay option
//
//			The recommended default value is 0x00. (R, W, setbycreate) (mandatory) (1-byte)
//
//		Direct Connect Uri Pointer
//			This attribute points to a network address ME that specifies the URI of the direct connect. If
//			this attribute is set to a null pointer, no URI is defined. (R, W, setbycreate) (mandatory) (2
//			bytes)
//
//		Bridged Line Agent Uri Pointer
//			This attribute points to a network address ME that specifies the URI of the bridged line agent.
//			If this attribute is set to a null pointer, no URI is defined. (R, W, setbycreate) (mandatory)
//			(2 bytes)
//
//		Conference Factory Uri Pointer
//			This attribute points to a network address ME that specifies the URI of the conference factory.
//			If this attribute is set to a null pointer, no URI is defined. (R, W, setbycreate) (mandatory)
//			(2 bytes)
//
//		Dial Tone Feature Delay_Warmline Timer New
//			Dial tone feature delay/warmline timer (new): This attribute defines the warmline timer/dial
//			tone feature delay timer (seconds). The default value 0 specifies vendor-specific
//			implementation. (R, W) (optional) (2 bytes)
//
//		Ip Host Pointer
//			This attribute points to the IP host config data or IPv6 host config data ME associated with
//			this VoIP config data ME. This attribute is only relevant when the VoIP configuration method
//			used attribute of this ME is set to configuration file retrieval (2) OR IETF sipping config
//			framework (4). Upon instantiation ONU sets this value to NULL (0xFFFF) pointer. (R, W)
//			(optional) (2 bytes)
//
type VoipApplicationServiceProfile struct {
	ManagedEntityDefinition
	Attributes AttributeValueMap
}

// Attribute name constants

const VoipApplicationServiceProfile_CidFeatures = "CidFeatures"
const VoipApplicationServiceProfile_CallWaitingFeatures = "CallWaitingFeatures"
const VoipApplicationServiceProfile_CallProgressOrTransferFeatures = "CallProgressOrTransferFeatures"
const VoipApplicationServiceProfile_CallPresentationFeatures = "CallPresentationFeatures"
const VoipApplicationServiceProfile_DirectConnectFeature = "DirectConnectFeature"
const VoipApplicationServiceProfile_DirectConnectUriPointer = "DirectConnectUriPointer"
const VoipApplicationServiceProfile_BridgedLineAgentUriPointer = "BridgedLineAgentUriPointer"
const VoipApplicationServiceProfile_ConferenceFactoryUriPointer = "ConferenceFactoryUriPointer"
const VoipApplicationServiceProfile_DialToneFeatureDelayWarmlineTimerNew = "DialToneFeatureDelayWarmlineTimerNew"
const VoipApplicationServiceProfile_IpHostPointer = "IpHostPointer"

func init() {
	voipapplicationserviceprofileBME = &ManagedEntityDefinition{
		Name:    "VoipApplicationServiceProfile",
		ClassID: VoipApplicationServiceProfileClassID,
		MessageTypes: mapset.NewSetWith(
			Create,
			Delete,
			Get,
			Set,
		),
		AllowedAttributeMask: 0xffc0,
		AttributeDefinitions: AttributeDefinitionMap{
			0:  Uint16Field(ManagedEntityID, PointerAttributeType, 0x0000, 0, mapset.NewSetWith(Read, SetByCreate), false, false, false, 0),
			1:  ByteField(VoipApplicationServiceProfile_CidFeatures, UnsignedIntegerAttributeType, 0x8000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 1),
			2:  ByteField(VoipApplicationServiceProfile_CallWaitingFeatures, UnsignedIntegerAttributeType, 0x4000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 2),
			3:  Uint16Field(VoipApplicationServiceProfile_CallProgressOrTransferFeatures, UnsignedIntegerAttributeType, 0x2000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 3),
			4:  Uint16Field(VoipApplicationServiceProfile_CallPresentationFeatures, UnsignedIntegerAttributeType, 0x1000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 4),
			5:  ByteField(VoipApplicationServiceProfile_DirectConnectFeature, UnsignedIntegerAttributeType, 0x0800, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 5),
			6:  Uint16Field(VoipApplicationServiceProfile_DirectConnectUriPointer, UnsignedIntegerAttributeType, 0x0400, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 6),
			7:  Uint16Field(VoipApplicationServiceProfile_BridgedLineAgentUriPointer, UnsignedIntegerAttributeType, 0x0200, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 7),
			8:  Uint16Field(VoipApplicationServiceProfile_ConferenceFactoryUriPointer, UnsignedIntegerAttributeType, 0x0100, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 8),
			9:  Uint16Field(VoipApplicationServiceProfile_DialToneFeatureDelayWarmlineTimerNew, UnsignedIntegerAttributeType, 0x0080, 0, mapset.NewSetWith(Read, Write), false, true, false, 9),
			10: Uint16Field(VoipApplicationServiceProfile_IpHostPointer, UnsignedIntegerAttributeType, 0x0040, 0, mapset.NewSetWith(Read, Write), false, true, false, 10),
		},
		Access:  CreatedByOlt,
		Support: UnknownSupport,
	}
}

// NewVoipApplicationServiceProfile (class ID 146) creates the basic
// Managed Entity definition that is used to validate an ME of this type that
// is received from or transmitted to the OMCC.
func NewVoipApplicationServiceProfile(params ...ParamData) (*ManagedEntity, OmciErrors) {
	return NewManagedEntity(*voipapplicationserviceprofileBME, params...)
}