| /* |
| * Copyright (c) 2018 - present. Boling Consulting Solutions (bcsw.net) |
| * Copyright 2020-present Open Networking Foundation |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| /* |
| * NOTE: This file was generated, manual edits will be overwritten! |
| * |
| * Generated by 'goCodeGenerator.py': |
| * https://github.com/cboling/OMCI-parser/README.md |
| */ |
| |
| package generated |
| |
| import "github.com/deckarep/golang-set" |
| |
| // VlanTaggingOperationConfigurationDataClassID is the 16-bit ID for the OMCI |
| // Managed entity VLAN tagging operation configuration data |
| const VlanTaggingOperationConfigurationDataClassID = ClassID(78) // 0x004e |
| |
| var vlantaggingoperationconfigurationdataBME *ManagedEntityDefinition |
| |
| // VlanTaggingOperationConfigurationData (Class ID: #78 / 0x004e) |
| // This ME organizes data associated with VLAN tagging. Instances of this ME are created and |
| // deleted by the OLT. |
| // |
| // NOTE 1 - The extended VLAN tagging operation configuration data of clause 9.3.13 is preferred |
| // for new implementations. |
| // |
| // Relationships |
| // Zero or one instance of this ME may exist for an instance of any ME that can terminate or modify |
| // an Ethernet stream.//// When this ME is associated with a UNI-side TP, it performs its upstream classification and |
| // tagging operations before offering the upstream frame to other filtering, bridging or switching |
| // functions. In the downstream direction, the defined inverse operation is the last operation |
| // performed on the frame before offering it to the UNI-side termination.//// When this ME is associated with an ANI-side TP, it performs its upstream classification and |
| // tagging operations as the last step before queueing for transmission to the OLT, after having |
| // received the upstream frame from other filtering, bridging or switching functions. In the |
| // downstream direction, the defined inverse operation is the first operation performed on the |
| // frame before offering it to possible filter, bridge or switch functions. |
| // |
| // Attributes |
| // Managed Entity Id |
| // This attribute uniquely identifies each instance of this ME. When the optional association type |
| // attribute is 0 or undefined, this attribute's value is the same as the ID of the ME with which |
| // this VLAN tagging operation configuration data instance is associated, which may be either a |
| // PPTP Ethernet UNI or an IP host config data or an IPv6 host config data ME. Otherwise, the value |
| // of the ME ID is unconstrained except by the need to be unique. (R, set-by-create) (mandatory) (2 |
| // bytes) |
| // |
| // Upstream Vlan Tagging Operation Mode |
| // This attribute controls upstream VLAN tagging. Valid values are as follows. |
| // |
| // 0 Upstream frame is sent as is, regardless of tag. |
| // |
| // 1 The upstream frame is tagged, whether or not the received frame was tagged. A tagged frame's |
| // TCI is overwritten with the upstream VLAN tag TCI value. An untagged frame is prepended with a |
| // tag whose values are taken from the upstream VLAN tag TCI value attribute. |
| // |
| // 2 A tag is prepended to the upstream frame, whether or not the received frame was tagged. If the |
| // received frame is tagged, a second tag (Q-in-Q) is added to the frame. If the received frame is |
| // not tagged, a tag is attached to the frame. The added tag is defined by the upstream VLAN tag |
| // TCI value attribute. |
| // |
| // (R,-W, setbycreate) (mandatory) (1-byte) |
| // |
| // Upstream Vlan Tag Tci Value |
| // This attribute specifies the TCI for upstream VLAN tagging. It is used when the upstream VLAN |
| // tagging operation mode is 1 or 2. (R,-W, setbycreate) (mandatory) (2-bytes) |
| // |
| // Downstream Vlan Tagging Operation Mode |
| // This attribute controls downstream VLAN tagging. Valid values are as follows. |
| // |
| // 0 Downstream frame is sent as is, regardless of tag. |
| // |
| // 1 If the received frame is tagged, the outer tag is stripped. An untagged frame is forwarded |
| // unchanged. |
| // |
| // (R,-W, setbycreate) (mandatory) (1-byte) |
| // |
| // Association Type |
| // This attribute specifies the type of ME that is associated with this VLAN tagging operation |
| // configuration data ME. Values are assigned in accordance with the following list. |
| // |
| // 0 (Default) Physical path termination point Ethernet UNI (for backward compatibility, may also |
| // be an IP host config data ME; they must not have the same ME ID). The associated ME instance is |
| // implicit; its identifier is the same as that of this VLAN tagging operation configuration data. |
| // |
| // 1 IP host config data or IPv6 host config data |
| // |
| // 2 IEEE 802.1p mapper service profile |
| // |
| // 3 MAC bridge port configuration data |
| // |
| // 4 Physical path termination point xDSL UNI |
| // |
| // 5 GEM IW termination point |
| // |
| // 6 Multicast GEM IW termination point |
| // |
| // 7 Physical path termination point MoCA UNI |
| // |
| // 8 Reserved |
| // |
| // 9 Ethernet flow termination point |
| // |
| // 10 Physical path termination point Ethernet UNI |
| // |
| // 11 Virtual Ethernet interface point |
| // |
| // 12 MPLS pseudowire termination point |
| // |
| // 13 EFM bonding group |
| // |
| // The associated ME instance is identified by the associated ME pointer. (R,-W, setbycreate) |
| // (optional) (1-byte) |
| // |
| // Associated Me Pointer |
| // When the association type attribute is non-zero, this attribute points to the ME with which this |
| // VLAN tagging operation configuration data ME is associated. Otherwise, this attribute is |
| // undefined, and the association is implicit through the ME ID. (R,-W, setbycreate) (optional) |
| // (2-bytes) |
| // |
| // NOTE 2 - Implicit association is retained for legacy compatibility. Explicit pointers are |
| // preferred for new implementations. |
| // |
| // NOTE 3 - When the association type is xDSL, the two MSBs may be used to indicate a bearer |
| // channel. |
| // |
| type VlanTaggingOperationConfigurationData struct { |
| ManagedEntityDefinition |
| Attributes AttributeValueMap |
| } |
| |
| // Attribute name constants |
| |
| const VlanTaggingOperationConfigurationData_UpstreamVlanTaggingOperationMode = "UpstreamVlanTaggingOperationMode" |
| const VlanTaggingOperationConfigurationData_UpstreamVlanTagTciValue = "UpstreamVlanTagTciValue" |
| const VlanTaggingOperationConfigurationData_DownstreamVlanTaggingOperationMode = "DownstreamVlanTaggingOperationMode" |
| const VlanTaggingOperationConfigurationData_AssociationType = "AssociationType" |
| const VlanTaggingOperationConfigurationData_AssociatedMePointer = "AssociatedMePointer" |
| |
| func init() { |
| vlantaggingoperationconfigurationdataBME = &ManagedEntityDefinition{ |
| Name: "VlanTaggingOperationConfigurationData", |
| ClassID: VlanTaggingOperationConfigurationDataClassID, |
| MessageTypes: mapset.NewSetWith( |
| Create, |
| Delete, |
| Get, |
| Set, |
| ), |
| AllowedAttributeMask: 0xf800, |
| AttributeDefinitions: AttributeDefinitionMap{ |
| 0: Uint16Field(ManagedEntityID, PointerAttributeType, 0x0000, 0, mapset.NewSetWith(Read, SetByCreate), false, false, false, 0), |
| 1: ByteField(VlanTaggingOperationConfigurationData_UpstreamVlanTaggingOperationMode, EnumerationAttributeType, 0x8000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 1), |
| 2: Uint16Field(VlanTaggingOperationConfigurationData_UpstreamVlanTagTciValue, UnsignedIntegerAttributeType, 0x4000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 2), |
| 3: ByteField(VlanTaggingOperationConfigurationData_DownstreamVlanTaggingOperationMode, EnumerationAttributeType, 0x2000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 3), |
| 4: ByteField(VlanTaggingOperationConfigurationData_AssociationType, EnumerationAttributeType, 0x1000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 4), |
| 5: Uint16Field(VlanTaggingOperationConfigurationData_AssociatedMePointer, PointerAttributeType, 0x0800, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 5), |
| }, |
| Access: CreatedByOlt, |
| Support: UnknownSupport, |
| } |
| } |
| |
| // NewVlanTaggingOperationConfigurationData (class ID 78) creates the basic |
| // Managed Entity definition that is used to validate an ME of this type that |
| // is received from or transmitted to the OMCC. |
| func NewVlanTaggingOperationConfigurationData(params ...ParamData) (*ManagedEntity, OmciErrors) { |
| return NewManagedEntity(*vlantaggingoperationconfigurationdataBME, params...) |
| } |