blob: ec94c5f6830c99643de2ace1d328c0c7bf01b828 [file] [log] [blame]
Kailash92764922019-07-25 08:21:39 -07001# Copyright 2017-present Open Networking Foundation
2#
3# Licensed under the Apache License, Version 2.0 (the "License");
4# you may not use this file except in compliance with the License.
5# You may obtain a copy of the License at
6#
7# http://www.apache.org/licenses/LICENSE-2.0
8#
9# Unless required by applicable law or agreed to in writing, software
10# distributed under the License is distributed on an "AS IS" BASIS,
11# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
12# See the License for the specific language governing permissions and
13# limitations under the License.
Kailash92764922019-07-25 08:21:39 -070014# robot test functions
15
16*** Settings ***
17Documentation Library for various utilities
18Library SSHLibrary
Kailash92764922019-07-25 08:21:39 -070019Library String
20Library DateTime
21Library Process
22Library Collections
23Library RequestsLibrary
24Library OperatingSystem
Andy Bavier63460da2020-02-20 14:35:12 -070025Library CORDRobot
26Library ImportResource resources=CORDRobot
TorstenThiemed4f48962020-12-08 12:17:19 +000027Resource ./voltctl.robot
Kailash92764922019-07-25 08:21:39 -070028
29*** Keywords ***
Kailash528f7c02019-07-31 10:55:49 -070030Check CLI Tools Configured
31 [Documentation] Tests that use 'voltctl' and 'kubectl' should execute this keyword in suite setup
32 # check voltctl and kubectl configured
Matteo Scandolo1eacdd82021-06-28 10:32:19 +020033 ${voltctl_rc} ${voltctl_output}= Run And Return Rc And Output voltctl -c ${VOLTCTL_CONFIG} device list
Hardik Windlass13803172021-04-26 08:17:07 +000034 Log ${voltctl_output}
35 ${kubectl_rc} ${kubectl_output}= Run And Return Rc And Output kubectl get pods
36 Log ${kubectl_output}
Gilles Depatie675a2062019-10-22 12:44:42 -040037 Run Keyword If ${voltctl_rc} != 0 or ${kubectl_rc} != 0 FATAL ERROR
38 ... VOLTCTL and KUBECTL not configured. Please configure before executing tests.
Gilles Depatieb5682f82019-10-31 10:39:45 -040039
40Send File To Onos
Zack Williamsa8fe75a2020-01-10 14:25:27 -070041 [Documentation] Send the content of the file to Onos to selected section of configuration
42 ... using Post Request
Huseyin Ahmet AYDIN42d3b712021-06-10 14:46:17 +000043 [Arguments] ${CONFIG_FILE} ${section}=${EMPTY}
Zack Williamsa8fe75a2020-01-10 14:25:27 -070044 ${Headers}= Create Dictionary Content-Type application/json
45 ${File_Data}= OperatingSystem.Get File ${CONFIG_FILE}
46 Log ${Headers}
47 Log ${File_Data}
48 ${resp}= Post Request ONOS
49 ... /onos/v1/network/configuration/${section} headers=${Headers} data=${File_Data}
50 Should Be Equal As Strings ${resp.status_code} 200
Andy Bavier88cd9f62019-11-26 16:22:33 -070051
52Common Test Suite Setup
53 [Documentation] Setup the test suite
Andy Bavier88cd9f62019-11-26 16:22:33 -070054 Set Global Variable ${KUBECTL_CONFIG} export KUBECONFIG=%{KUBECONFIG}
Matteo Scandolo5899be12020-11-11 15:38:07 -080055 Set Global Variable ${VOLTCTL_CONFIG} %{VOLTCONFIG}
Andy Bavier88cd9f62019-11-26 16:22:33 -070056 ${k8s_node_ip}= Evaluate ${nodes}[0].get("ip")
ubuntu6b6e7d42020-03-02 12:35:42 -080057 ${ONOS_REST_IP}= Get Environment Variable ONOS_REST_IP ${k8s_node_ip}
58 ${ONOS_SSH_IP}= Get Environment Variable ONOS_SSH_IP ${k8s_node_ip}
59 Set Global Variable ${ONOS_REST_IP}
60 Set Global Variable ${ONOS_SSH_IP}
Andy Bavier88cd9f62019-11-26 16:22:33 -070061 ${k8s_node_user}= Evaluate ${nodes}[0].get("user")
62 ${k8s_node_pass}= Evaluate ${nodes}[0].get("pass")
63 Check CLI Tools Configured
64 ${onos_auth}= Create List karaf karaf
65 ${HEADERS} Create Dictionary Content-Type=application/json
ubuntu6b6e7d42020-03-02 12:35:42 -080066 Create Session ONOS http://${ONOS_REST_IP}:${ONOS_REST_PORT} auth=${ONOS_AUTH}
Suchitra Vemuria6879aa2020-11-03 11:03:11 -080067 ${num_olts} Get Length ${olts}
68 ${list_olts} Create List
Suchitra Vemuriac9785e2021-01-07 16:50:18 -080069 # Create olt list from the configuration file
Suchitra Vemuria6879aa2020-11-03 11:03:11 -080070 FOR ${I} IN RANGE 0 ${num_olts}
71 ${ip} Evaluate ${olts}[${I}].get("ip")
72 ${user} Evaluate ${olts}[${I}].get("user")
73 ${pass} Evaluate ${olts}[${I}].get("pass")
74 ${serial_number} Evaluate ${olts}[${I}].get("serial")
75 ${olt_ssh_ip} Evaluate ${olts}[${I}].get("sship")
Andrea Campanella3dcce272021-01-15 16:04:47 +010076 ${type} Evaluate ${olts}[${I}].get("type")
Suchitra Vemuri09f878d2021-02-10 18:19:04 -080077 ${orig_olt_port} Evaluate ${olts}[${I}].get("oltPort")
78 ${port}= Set Variable If "${orig_olt_port}" == "None" ${OLT_PORT} ${orig_olt_port}
Suchitra Vemuria6879aa2020-11-03 11:03:11 -080079 ${onu_count}= Get ONU Count For OLT ${hosts.src} ${serial_number}
Suchitra Vemurife309412020-12-01 19:19:52 -080080 ${onu_list}= Get ONU List For OLT ${hosts.src} ${serial_number}
Suchitra Vemuria6879aa2020-11-03 11:03:11 -080081 ${olt} Create Dictionary ip ${ip} user ${user} pass
Andrea Campanella3dcce272021-01-15 16:04:47 +010082 ... ${pass} sn ${serial_number} onucount ${onu_count} type ${type}
Suchitra Vemuri09f878d2021-02-10 18:19:04 -080083 ... sship ${olt_ssh_ip} oltport ${port} onus ${onu_list}
Suchitra Vemuria6879aa2020-11-03 11:03:11 -080084 Append To List ${list_olts} ${olt}
85 END
86 ${num_all_onus}= Get Length ${hosts.src}
87 ${num_all_onus}= Convert to String ${num_all_onus}
Andy Bavier88cd9f62019-11-26 16:22:33 -070088 #send sadis file to onos
Andy Baviera2691752019-11-27 12:18:38 -070089 ${sadis_file}= Get Variable Value ${sadis.file}
Zack Williamsa8fe75a2020-01-10 14:25:27 -070090 Log To Console \nSadis File:${sadis_file}
Andy Bavier88cd9f62019-11-26 16:22:33 -070091 Run Keyword Unless '${sadis_file}' is '${None}' Send File To Onos ${sadis_file} apps/
Suchitra Vemuria6879aa2020-11-03 11:03:11 -080092 Set Suite Variable ${num_all_onus}
93 Set Suite Variable ${num_olts}
94 Set Suite Variable ${list_olts}
95 ${olt_count}= Get Length ${list_olts}
96 Set Suite Variable ${olt_count}
Andrea Campanella3dcce272021-01-15 16:04:47 +010097 @{container_list}= Create List ${OLT_ADAPTER_APP_LABEL} adapter-open-onu voltha-api-server
Andy Bavier88cd9f62019-11-26 16:22:33 -070098 ... voltha-ro-core voltha-rw-core-11 voltha-rw-core-12 voltha-ofagent
99 Set Suite Variable ${container_list}
100 ${datetime}= Get Current Date
suraj gour7f6d5fe2019-11-29 10:56:35 +0000101 Set Suite Variable ${datetime}
102
Suchitra Vemuria6879aa2020-11-03 11:03:11 -0800103Get ONU Count For OLT
104 [Arguments] ${src} ${serial_number}
105 [Documentation] Gets ONU Count for the specified OLT
106 ${src_length}= Get Length ${src}
107 ${count}= Set Variable 0
108 FOR ${I} IN RANGE 0 ${src_length}
109 ${sn} Evaluate ${src}[${I}].get("olt")
TorstenThiemed4f48962020-12-08 12:17:19 +0000110 ${count}= Run Keyword If '${serial_number}' == '${sn}' Evaluate ${count} + 1
111 ... ELSE Set Variable ${count}
Suchitra Vemuria6879aa2020-11-03 11:03:11 -0800112 END
113 [Return] ${count}
114
Suchitra Vemurife309412020-12-01 19:19:52 -0800115Get ONU List For OLT
116 [Arguments] ${src} ${serial_number}
117 [Documentation] Gets ONU List for the specified OLT
118 ${src_length}= Get Length ${src}
119 ${onu_list}= Create List
120 FOR ${I} IN RANGE 0 ${src_length}
121 ${sn} Evaluate ${src}[${I}].get("olt")
Matteo Scandolo243288d2021-09-20 14:48:58 -0700122 Run Keyword If '${serial_number}' == '${sn}' Append To List ${onu_list} ${src}[${I}][onu]
Suchitra Vemurife309412020-12-01 19:19:52 -0800123 ... ELSE Set Variable ${onu_list}
124 END
125 [Return] ${onu_list}
126
suraj gour7f6d5fe2019-11-29 10:56:35 +0000127WPA Reassociate
suraj gour7f6d5fe2019-11-29 10:56:35 +0000128 [Documentation] Executes a particular wpa_cli reassociate, which performs force reassociation
Zack Williamsa8fe75a2020-01-10 14:25:27 -0700129 [Arguments] ${iface} ${ip} ${user} ${pass}=${None}
130 ... ${container_type}=${None} ${container_name}=${None}
suraj gour7f6d5fe2019-11-29 10:56:35 +0000131 #Below for loops are used instead of sleep time, to execute reassociate command and check status
Zack Williamsa8fe75a2020-01-10 14:25:27 -0700132 FOR ${i} IN RANGE 70
133 ${output}= Login And Run Command On Remote System
134 ... wpa_cli -i ${iface} reassociate ${ip} ${user}
135 ... ${pass} ${container_type} ${container_name}
136 ${passed}= Run Keyword And Return Status Should Contain ${output} OK
Andy Bavierb63f6d22020-03-12 15:34:37 -0700137 Exit For Loop If ${passed}
Zack Williamsa8fe75a2020-01-10 14:25:27 -0700138 END
Andy Bavierb63f6d22020-03-12 15:34:37 -0700139 Should Be True ${passed} Status does not contain 'SUCCESS'
Zack Williamsa8fe75a2020-01-10 14:25:27 -0700140 FOR ${i} IN RANGE 70
141 ${output}= Login And Run Command On Remote System
Andy Bavierae4a17e2020-02-25 14:54:36 -0700142 ... wpa_cli -i ${iface} status | grep SUCCESS ${ip} ${user}
Zack Williamsa8fe75a2020-01-10 14:25:27 -0700143 ... ${pass} ${container_type} ${container_name}
144 ${passed}= Run Keyword And Return Status Should Contain ${output} SUCCESS
Andy Bavierb63f6d22020-03-12 15:34:37 -0700145 Exit For Loop If ${passed}
Zack Williamsa8fe75a2020-01-10 14:25:27 -0700146 END
Andy Bavierb63f6d22020-03-12 15:34:37 -0700147 Should Be True ${passed} Status does not contain 'SUCCESS'
Zack Williamsa8fe75a2020-01-10 14:25:27 -0700148
suraj gour7f6d5fe2019-11-29 10:56:35 +0000149Validate Authentication After Reassociate
Zack Williamsa8fe75a2020-01-10 14:25:27 -0700150 [Arguments] ${auth_pass} ${iface} ${ip} ${user} ${pass}=${None}
151 ... ${container_type}=${None} ${container_name}=${None}
152 [Documentation]
153 ... Executes a particular reassociate request on the RG using wpa_cli.
154 ... auth_pass determines if authentication should pass
Andy Bavier84834d42020-02-25 13:49:50 -0700155 ${wpa_log}= Catenate SEPARATOR=. /tmp/wpa ${iface} log
156 ${output}= Login And Run Command On Remote System truncate -s 0 ${wpa_log}; cat ${wpa_log}
157 ... ${ip} ${user} ${pass} ${container_type} ${container_name}
158 Log ${output}
159 Should Not Contain ${output} authentication completed successfully
suraj gour7f6d5fe2019-11-29 10:56:35 +0000160 WPA Reassociate ${iface} ${ip} ${user} ${pass} ${container_type} ${container_name}
Zack Williamsa8fe75a2020-01-10 14:25:27 -0700161 Run Keyword If '${auth_pass}' == 'True' Wait Until Keyword Succeeds ${timeout} 2s
Andy Bavier84834d42020-02-25 13:49:50 -0700162 ... Check Remote File Contents True ${wpa_log} ${iface}.*authentication completed successfully
Zack Williamsa8fe75a2020-01-10 14:25:27 -0700163 ... ${ip} ${user} ${pass} ${container_type} ${container_name}
suraj gour7f6d5fe2019-11-29 10:56:35 +0000164 Run Keyword If '${auth_pass}' == 'False' Sleep 20s
Suchitra Vemuri3cb29f82020-02-25 13:59:58 -0800165 Run Keyword If '${auth_pass}' == 'False' Check Remote File Contents False /tmp/wpa.log
Andy Bavier84834d42020-02-25 13:49:50 -0700166 ... ${iface}.*authentication completed successfully ${ip} ${user} ${pass}
Zack Williamsa8fe75a2020-01-10 14:25:27 -0700167 ... ${container_type} ${container_name}
suraj gourd5cfdbb2019-12-13 12:44:55 +0000168
169Send Dhclient Request To Release Assigned IP
Zack Williamsa8fe75a2020-01-10 14:25:27 -0700170 [Arguments] ${iface} ${ip} ${user} ${path_dhcpleasefile} ${pass}=${None}
171 ... ${container_type}=${None} ${container_name}=${None}
suraj gourd5cfdbb2019-12-13 12:44:55 +0000172 [Documentation] Executes a dhclient with option to release ip against a particular interface on the RG (src)
Zack Williamsa8fe75a2020-01-10 14:25:27 -0700173 ${result}= Login And Run Command On Remote System
174 ... dhclient -nw -r ${iface} && rm ${path_dhcpleasefile}/dhclient.* ${ip} ${user}
suraj gourd5cfdbb2019-12-13 12:44:55 +0000175 ... ${pass} ${container_type} ${container_name}
176 Log ${result}
177 #Should Contain ${result} DHCPRELEASE
178 [Return] ${result}
suraj gour1ecfae92019-12-20 15:11:40 +0000179
180Check Remote File Contents For WPA Logs
Zack Williamsa8fe75a2020-01-10 14:25:27 -0700181 [Arguments] ${file_should_exist} ${file} ${pattern} ${ip} ${user} ${pass}=${None}
182 ... ${container_type}=${None} ${container_name}=${None} ${prompt}=~$
suraj gour1ecfae92019-12-20 15:11:40 +0000183 [Documentation] Checks for particular pattern count in a file
Zack Williamsa8fe75a2020-01-10 14:25:27 -0700184 ${result}= Login And Run Command On Remote System
185 ... cat ${file} | grep '${pattern}' | wc -l ${ip} ${user} ${pass}
suraj gour1ecfae92019-12-20 15:11:40 +0000186 ... ${container_type} ${container_name} ${prompt}
187 [Return] ${result}
Gayathri.Selvanee4a91b2020-01-17 06:49:53 +0000188
189Perform Sanity Test
Suchitra Vemuria6879aa2020-11-03 11:03:11 -0800190 [Documentation] This keyword iterate all OLTs and performs Sanity Test Procedure
191 ... for all the ONUs connected to each OLT - ATT workflow
TorstenThiemec3c23232021-01-13 13:06:31 +0000192 ... For repeating sanity test without subscriber changes set flag supress_add_subscriber=True.
193 ... In all other (common) cases flag has to be set False (default).
194 [Arguments] ${supress_add_subscriber}=False
Suchitra Vemuria6879aa2020-11-03 11:03:11 -0800195 FOR ${J} IN RANGE 0 ${num_olts}
196 ${olt_serial_number}= Set Variable ${list_olts}[${J}][sn]
197 ${onu_count}= Set Variable ${list_olts}[${J}][onucount]
198 ${of_id}= Wait Until Keyword Succeeds ${timeout} 15s Validate OLT Device in ONOS
199 ... ${olt_serial_number}
200 Set Global Variable ${of_id}
TorstenThiemedda37652021-11-11 16:22:05 +0000201 ${nni_port}= Wait Until Keyword Succeeds ${timeout} 2s Get NNI Port in ONOS ${of_id}
Suchitra Vemuria6879aa2020-11-03 11:03:11 -0800202 Perform Sanity Test Per OLT ${of_id} ${nni_port} ${olt_serial_number} ${onu_count}
TorstenThiemec3c23232021-01-13 13:06:31 +0000203 ... ${supress_add_subscriber}
Suchitra Vemuria6879aa2020-11-03 11:03:11 -0800204 END
205
206Perform Sanity Test Per OLT
TorstenThiemec3c23232021-01-13 13:06:31 +0000207 [Arguments] ${of_id} ${nni_port} ${olt_serial_number} ${num_onus} ${supress_add_subscriber}=False
Gayathri.Selvanee4a91b2020-01-17 06:49:53 +0000208 [Documentation] This keyword performs Sanity Test Procedure
209 ... Sanity test performs authentication, dhcp and pings for all the ONUs given for the POD
210 ... This keyword can be used to call in any other tests where sanity check is required
Suchitra Vemuria6879aa2020-11-03 11:03:11 -0800211 ... and avoids duplication of code. - ATT workflow
TorstenThiemec3c23232021-01-13 13:06:31 +0000212 ... For repeating sanity test without subscriber changes set flag supress_add_subscriber=True.
213 ... In all other (common) cases flag has to be set False (default).
Suchitra Vemuria6879aa2020-11-03 11:03:11 -0800214 FOR ${I} IN RANGE 0 ${num_all_onus}
Gayathri.Selvanee4a91b2020-01-17 06:49:53 +0000215 ${src}= Set Variable ${hosts.src[${I}]}
216 ${dst}= Set Variable ${hosts.dst[${I}]}
Suchitra Vemuria6879aa2020-11-03 11:03:11 -0800217 Continue For Loop If "${olt_serial_number}"!="${src['olt']}"
Gayathri.Selvanee4a91b2020-01-17 06:49:53 +0000218 ${onu_device_id}= Get Device ID From SN ${src['onu']}
Matteo Scandoloc2f48fa2021-09-29 13:32:55 -0700219 ${onu_port}= Wait Until Keyword Succeeds ${timeout} 2s
Hardik Windlass1ed2eee2021-06-25 09:51:03 +0000220 ... Get ONU Port in ONOS ${src['onu']} ${of_id} ${src['uni_id']}
Suchitra Vemuri8078b972020-02-06 19:07:41 -0800221 # Check ONU port is Enabled in ONOS
Matteo Scandoloc2f48fa2021-09-29 13:32:55 -0700222 Wait Until Keyword Succeeds 120s 2s
Hardik Windlass39015672021-07-05 05:48:08 +0000223 ... Verify UNI Port Is Enabled ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${src['onu']} ${src['uni_id']}
Matteo Scandoloebf2be42021-09-22 09:46:50 -0700224 # Verify Default Meter in ONOS (valid only for ATT and only if subscriber is not provisioned)
225 Run Keyword Unless ${supress_add_subscriber}
226 ... Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
Matteo Scandolo243288d2021-09-20 14:48:58 -0700227 ... Verify Default Meter Present in ONOS ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${of_id}
Matteo Scandolo7e519fb2021-08-13 11:35:16 -0700228 # Verify default EAPOL flows are added for the ONU port
TorstenThiemec3c23232021-01-13 13:06:31 +0000229 Run Keyword Unless ${supress_add_subscriber}
230 ... Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s
Matteo Scandolo7e519fb2021-08-13 11:35:16 -0700231 ... Verify Eapol Flows Added For ONU ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${of_id} ${onu_port}
Matteo Scandolo7bdbe2d2021-11-29 15:48:25 -0800232 # Verify LLDP flow in ONOS
Matteo Scandolo6a90bda2021-11-30 11:31:38 -0800233 Wait Until Keyword Succeeds ${timeout} 5s
Matteo Scandolo7bdbe2d2021-11-29 15:48:25 -0800234 ... Verify LLDP Flow Added ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${of_id} 1
Suchitra Vemuri8078b972020-02-06 19:07:41 -0800235 # Verify ONU state in voltha
Matteo Scandolo6a90bda2021-11-30 11:31:38 -0800236 Run Keyword Wait Until Keyword Succeeds ${timeout} 5s Validate Device
Suchitra Vemuri8078b972020-02-06 19:07:41 -0800237 ... ENABLED ACTIVE REACHABLE
238 ... ${src['onu']} onu=True onu_reason=omci-flows-pushed
239 # Perform Authentication
Andy Bavier84834d42020-02-25 13:49:50 -0700240 ${wpa_log}= Run Keyword If ${has_dataplane} Catenate SEPARATOR=.
241 ... /tmp/wpa ${src['dp_iface_name']} log
Matteo Scandoloc2f48fa2021-09-29 13:32:55 -0700242 Run Keyword If ${has_dataplane} Validate Authentication True
Gayathri.Selvanee4a91b2020-01-17 06:49:53 +0000243 ... ${src['dp_iface_name']} wpa_supplicant.conf ${src['ip']} ${src['user']} ${src['pass']}
Andy Bavier84834d42020-02-25 13:49:50 -0700244 ... ${src['container_type']} ${src['container_name']} ${wpa_log}
Matteo Scandoloc2f48fa2021-09-29 13:32:55 -0700245 Wait Until Keyword Succeeds ${timeout} 2
ubuntu6b6e7d42020-03-02 12:35:42 -0800246 ... Verify ONU in AAA-Users ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${onu_port}
TorstenThiemec3c23232021-01-13 13:06:31 +0000247 Run Keyword Unless ${supress_add_subscriber}
TorstenThieme4e2168e2021-06-22 14:01:47 +0000248 ... Execute ONOS CLI Command use single connection ${ONOS_SSH_IP} ${ONOS_SSH_PORT}
Gayathri.Selvanee4a91b2020-01-17 06:49:53 +0000249 ... volt-add-subscriber-access ${of_id} ${onu_port}
Suchitra Vemuri9da44302020-03-04 14:24:49 -0800250 # Verify that no pending flows exist for the ONU port
Matteo Scandoloc2f48fa2021-09-29 13:32:55 -0700251 Wait Until Keyword Succeeds ${timeout} 2s
Suchitra Vemuri9da44302020-03-04 14:24:49 -0800252 ... Verify No Pending Flows For ONU ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${onu_port}
Hardik Windlass21807632020-04-14 16:24:55 +0530253 # Verify subscriber access flows are added for the ONU port
Matteo Scandoloc2f48fa2021-09-29 13:32:55 -0700254 Wait Until Keyword Succeeds ${timeout} 5s
Hardik Windlass21807632020-04-14 16:24:55 +0530255 ... Verify Subscriber Access Flows Added For ONU ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${of_id}
256 ... ${onu_port} ${nni_port} ${src['c_tag']} ${src['s_tag']}
Matteo Scandolo7e519fb2021-08-13 11:35:16 -0700257 # Verify subscriber EAPOL flow is installed
Matteo Scandoloc2f48fa2021-09-29 13:32:55 -0700258 Wait Until Keyword Succeeds ${timeout} 5s
Matteo Scandolo7e519fb2021-08-13 11:35:16 -0700259 ... Verify Eapol Flows Added For ONU ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${of_id}
260 ... ${onu_port} ${src['c_tag']}
Hardik Windlass2a9b1592020-07-23 18:28:13 +0530261 # Verify Meters in ONOS
Matteo Scandolo6a90bda2021-11-30 11:31:38 -0800262 Run Keyword Wait Until Keyword Succeeds ${timeout} 5s
Hardik Windlass2a9b1592020-07-23 18:28:13 +0530263 ... Verify Meters in ONOS ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${of_id} ${onu_port}
Matteo Scandoloc2f48fa2021-09-29 13:32:55 -0700264 Run Keyword If ${has_dataplane} Validate DHCP and Ping True
Gayathri.Selvanee4a91b2020-01-17 06:49:53 +0000265 ... True ${src['dp_iface_name']} ${src['s_tag']} ${src['c_tag']} ${dst['dp_iface_ip_qinq']}
266 ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
267 ... ${dst['dp_iface_name']} ${dst['ip']} ${dst['user']} ${dst['pass']} ${dst['container_type']}
268 ... ${dst['container_name']}
Matteo Scandoloc2f48fa2021-09-29 13:32:55 -0700269 Wait Until Keyword Succeeds ${timeout} 2s
ubuntu6b6e7d42020-03-02 12:35:42 -0800270 ... Validate Subscriber DHCP Allocation ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${onu_port}
Gayathri.Selvanee4a91b2020-01-17 06:49:53 +0000271 END
272
Hardik Windlassa3d04b92020-02-17 15:06:05 +0000273Perform Sanity Test DT
Suchitra Vemuria6879aa2020-11-03 11:03:11 -0800274 [Documentation] This keyword iterate all OLTs and performs Sanity Test Procedure for DT workflow
TorstenThiemec3c23232021-01-13 13:06:31 +0000275 ... For repeating sanity test without subscriber changes set flag supress_add_subscriber=True.
276 ... In all other (common) cases flag has to be set False (default).
277 [Arguments] ${supress_add_subscriber}=False
Suchitra Vemuria6879aa2020-11-03 11:03:11 -0800278 FOR ${J} IN RANGE 0 ${num_olts}
279 ${olt_serial_number}= Set Variable ${list_olts}[${J}][sn]
280 ${num_onus}= Set Variable ${list_olts}[${J}][onucount]
281 ${olt_device_id}= Get OLTDeviceID From OLT List ${olt_serial_number}
282 ${of_id}= Wait Until Keyword Succeeds ${timeout} 15s Validate OLT Device in ONOS
283 ... ${olt_serial_number}
284 Set Global Variable ${of_id}
TorstenThiemedda37652021-11-11 16:22:05 +0000285 ${nni_port}= Wait Until Keyword Succeeds ${timeout} 2s Get NNI Port in ONOS ${of_id}
Suchitra Vemuria6879aa2020-11-03 11:03:11 -0800286 Perform Sanity Test DT Per OLT ${of_id} ${nni_port} ${olt_serial_number} ${num_onus}
TorstenThiemec3c23232021-01-13 13:06:31 +0000287 ... ${supress_add_subscriber}
Suchitra Vemuria6879aa2020-11-03 11:03:11 -0800288 # Verify ONOS Flows
289 # Number of Access Flows on ONOS equals 4 * the Number of Active ONUs (2 for each downstream and upstream)
290 ${onos_flows_count}= Evaluate 4 * ${num_onus}
291 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
292 ... Verify Subscriber Access Flows Added Count DT ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${of_id}
293 ... ${onos_flows_count}
Matteo Scandolo7bdbe2d2021-11-29 15:48:25 -0800294 # Verify LLDP flow in ONOS
Matteo Scandolo6a90bda2021-11-30 11:31:38 -0800295 Wait Until Keyword Succeeds ${timeout} 5s
Matteo Scandolo7bdbe2d2021-11-29 15:48:25 -0800296 ... Verify LLDP Flow Added ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${of_id} 1
Suchitra Vemuria6879aa2020-11-03 11:03:11 -0800297 # Verify VOLTHA Flows
298 # Number of per OLT Flows equals Twice the Number of Active ONUs (each for downstream and upstream) + 1 for LLDP
299 ${olt_flows}= Evaluate 2 * ${num_onus} + 1
300 # Number of per ONU Flows equals 2 (one each for downstream and upstream)
301 ${onu_flows}= Set Variable 2
Matteo Scandolo6a90bda2021-11-30 11:31:38 -0800302 Run Keyword Wait Until Keyword Succeeds ${timeout} 5s Validate OLT Flows
Hardik Windlass5d537ad2021-11-16 06:01:54 +0000303 ... ${olt_flows} ${olt_device_id}
Suchitra Vemuria6879aa2020-11-03 11:03:11 -0800304 ${List_ONU_Serial} Create List
305 Set Suite Variable ${List_ONU_Serial}
Suchitra Vemuri21a47fd2020-11-16 18:39:09 -0800306 Build ONU SN List ${List_ONU_Serial} ${olt_serial_number}
Suchitra Vemuria6879aa2020-11-03 11:03:11 -0800307 Log ${List_ONU_Serial}
Hardik Windlass5d537ad2021-11-16 06:01:54 +0000308 Wait Until Keyword Succeeds ${timeout} 5s Validate ONU Flows
Suchitra Vemuria6879aa2020-11-03 11:03:11 -0800309 ... ${List_ONU_Serial} ${onu_flows}
310 END
311
312
313Perform Sanity Test DT Per OLT
TorstenThiemec3c23232021-01-13 13:06:31 +0000314 [Arguments] ${of_id} ${nni_port} ${olt_serial_number} ${num_onus} ${supress_add_subscriber}=False
Hardik Windlassa3d04b92020-02-17 15:06:05 +0000315 [Documentation] This keyword performs Sanity Test Procedure for DT Workflow
316 ... Sanity test performs dhcp and pings (without EAPOL and DHCP flows) for all the ONUs given for the POD
317 ... This keyword can be used to call in any other tests where sanity check is required
318 ... and avoids duplication of code.
TorstenThiemec3c23232021-01-13 13:06:31 +0000319 ... For repeating sanity test without subscriber changes set flag supress_add_subscriber=True.
320 ... In all other (common) cases flag has to be set False (default).
Suchitra Vemuria6879aa2020-11-03 11:03:11 -0800321 FOR ${I} IN RANGE 0 ${num_all_onus}
Hardik Windlassa3d04b92020-02-17 15:06:05 +0000322 ${src}= Set Variable ${hosts.src[${I}]}
323 ${dst}= Set Variable ${hosts.dst[${I}]}
Suchitra Vemuria6879aa2020-11-03 11:03:11 -0800324 Continue For Loop If "${olt_serial_number}"!="${src['olt']}"
Hardik Windlassa3d04b92020-02-17 15:06:05 +0000325 ${onu_device_id}= Get Device ID From SN ${src['onu']}
Matteo Scandoloc2f48fa2021-09-29 13:32:55 -0700326 ${onu_port}= Wait Until Keyword Succeeds ${timeout} 2s
Emrehan UZUNabef5182021-11-26 10:54:24 +0000327 ... Get ONU Port in ONOS ${src['onu']} ${of_id} ${src['uni_id']}
Hardik Windlassa3d04b92020-02-17 15:06:05 +0000328 # Check ONU port is Enabled in ONOS
Matteo Scandoloc2f48fa2021-09-29 13:32:55 -0700329 Wait Until Keyword Succeeds 120s 2s
Emrehan UZUNabef5182021-11-26 10:54:24 +0000330 ... Verify UNI Port Is Enabled ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${src['onu']} ${src['uni_id']}
TorstenThiemec3c23232021-01-13 13:06:31 +0000331 Run Keyword Unless ${supress_add_subscriber}
TorstenThieme4e2168e2021-06-22 14:01:47 +0000332 ... Execute ONOS CLI Command use single connection ${ONOS_SSH_IP} ${ONOS_SSH_PORT}
Hardik Windlassa3d04b92020-02-17 15:06:05 +0000333 ... volt-add-subscriber-access ${of_id} ${onu_port}
Hardik Windlassfb5eace2020-03-26 14:49:01 +0530334 # Verify subscriber access flows are added for the ONU port
Matteo Scandoloc2f48fa2021-09-29 13:32:55 -0700335 Wait Until Keyword Succeeds ${timeout} 5s
Hardik Windlass25e11702020-03-30 20:05:19 +0530336 ... Verify Subscriber Access Flows Added For ONU DT ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${of_id}
337 ... ${onu_port} ${nni_port} ${src['s_tag']}
TorstenThiemea36068c2021-02-19 09:57:32 +0000338 # Verify ONU state in voltha
339 ${onu_reasons}= Create List omci-flows-pushed
Matteo Scandoloc2f48fa2021-09-29 13:32:55 -0700340 Wait Until Keyword Succeeds ${timeout} 5s Validate Device
Hardik Windlassa3d04b92020-02-17 15:06:05 +0000341 ... ENABLED ACTIVE REACHABLE
TorstenThiemec3c23232021-01-13 13:06:31 +0000342 ... ${src['onu']} onu=True onu_reason=${onu_reasons}
Hardik Windlass2a9b1592020-07-23 18:28:13 +0530343 # Verify Meters in ONOS
Hardik Windlass5d537ad2021-11-16 06:01:54 +0000344 Wait Until Keyword Succeeds ${timeout} 5s
Girish Gowdra21ec25d2021-05-24 10:07:01 -0700345 ... Verify Meters in ONOS Ietf ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${of_id} ${onu_port}
Hardik Windlassfb5eace2020-03-26 14:49:01 +0530346 # TODO: Yet to Verify on the GPON based Physical POD (VOL-2652)
Matteo Scandoloc2f48fa2021-09-29 13:32:55 -0700347 Run Keyword If ${has_dataplane} Validate DHCP and Ping True
Hardik Windlassa3d04b92020-02-17 15:06:05 +0000348 ... True ${src['dp_iface_name']} ${src['s_tag']} ${src['c_tag']} ${dst['dp_iface_ip_qinq']}
349 ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
350 ... ${dst['dp_iface_name']} ${dst['ip']} ${dst['user']} ${dst['pass']} ${dst['container_type']}
351 ... ${dst['container_name']}
Hardik Windlassa3d04b92020-02-17 15:06:05 +0000352 END
Suchitra Vemuria6879aa2020-11-03 11:03:11 -0800353
354Validate All OLT Flows
355 [Documentation] This keyword iterate all OLTs and performs Sanity Test Procedure for DT workflow
356 FOR ${J} IN RANGE 0 ${num_olts}
357 ${olt_serial_number}= Set Variable ${list_olts}[${J}][sn]
358 ${num_onus}= Set Variable ${list_olts}[${J}][onucount]
359 ${olt_device_id}= Get OLTDeviceID From OLT List ${olt_serial_number}
360 ${of_id}= Wait Until Keyword Succeeds ${timeout} 15s Validate OLT Device in ONOS
361 ... ${olt_serial_number}
362 Set Global Variable ${of_id}
363 # Verify ONOS Flows
364 # Number of Access Flows on ONOS equals 4 * the Number of Active ONUs (2 for each downstream and upstream)
365 ${onos_flows_count}= Evaluate 4 * ${num_onus}
366 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
367 ... Verify Subscriber Access Flows Added Count DT ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${of_id}
368 ... ${onos_flows_count}
369 # Verify VOLTHA Flows
370 # Number of per OLT Flows equals Twice the Number of Active ONUs (each for downstream and upstream) + 1 for LLDP
371 ${olt_flows}= Evaluate 2 * ${num_onus} + 1
372 # Number of per ONU Flows equals 2 (one each for downstream and upstream)
373 ${onu_flows}= Set Variable 2
374 Run Keyword Wait Until Keyword Succeeds ${timeout} 5s Validate OLT Flows ${olt_flows}
375 ... ${olt_device_id}
376 ${List_ONU_Serial} Create List
377 Set Suite Variable ${List_ONU_Serial}
Andrea Campanella6391f842020-11-16 10:01:18 +0100378 Build ONU SN List ${List_ONU_Serial} ${olt_serial_number}
Suchitra Vemuria6879aa2020-11-03 11:03:11 -0800379 Log ${List_ONU_Serial}
380 Run Keyword Wait Until Keyword Succeeds ${timeout} 5s Validate ONU Flows
381 ... ${List_ONU_Serial} ${onu_flows}
382 END
Hardik Windlassa3d04b92020-02-17 15:06:05 +0000383
TorstenThieme70bc5262021-01-19 12:12:55 +0000384Perform Sanity Tests TT
385 [Documentation] This keyword performs both Sanity Test Procedure for TT Workflow
386 ... Sanity Test TT for HSIA, VoD, VoIP services and Sanity Test TT for MCAST
387 ... For repeating sanity tests without subscriber changes set flag supress_add_subscriber=True.
388 ... In all other (common) cases flag has to be set False (default).
389 [Arguments] ${supress_add_subscriber}=False
390 Perform Sanity Test TT ${supress_add_subscriber}
TorstenThieme136ebf72021-02-26 14:27:07 +0000391 # run of mcast sanity test is currently limited for real HW
392 Run Keyword If ${has_dataplane} Perform Sanity Test TT MCAST ${supress_add_subscriber}
TorstenThieme70bc5262021-01-19 12:12:55 +0000393
Huseyin Ahmet AYDIN7cb5ae62021-10-28 11:07:27 +0000394Provision Subscription TT
395 [Documentation] Provision Subscription TT
396 [Arguments] ${supress_add_subscriber}=False
397 FOR ${I} IN RANGE 0 ${num_all_onus}
398 ${src}= Set Variable ${hosts.src[${I}]}
399 ${dst}= Set Variable ${hosts.dst[${I}]}
400 ${service_type}= Get Variable Value ${src['service_type']} "null"
401 Run Keyword IF '${service_type}' != 'mcast' Provision Subscription for ONU TT ${src} ${dst}
402 ... ${supress_add_subscriber}
403 END
404
Suchitra Vemuri2f1e07d2020-06-26 19:18:01 -0700405Perform Sanity Test TT
406 [Documentation] This keyword performs Sanity Test Procedure for TT Workflow
407 ... Sanity test performs dhcp and pings (without EAPOL and DHCP flows) for all the ONUs given for the POD
408 ... This keyword can be used to call in any other tests where sanity check is required
409 ... and avoids duplication of code.
TorstenThieme70bc5262021-01-19 12:12:55 +0000410 ... For repeating sanity test without subscriber changes set flag supress_add_subscriber=True.
411 ... In all other (common) cases flag has to be set False (default).
Hardik Windlassc609eb02022-02-22 11:28:37 +0000412 [Arguments] ${supress_add_subscriber}=False ${maclearning_enabled}=False
Suchitra Vemuria6879aa2020-11-03 11:03:11 -0800413 FOR ${I} IN RANGE 0 ${num_all_onus}
Suchitra Vemuri85cb7d62020-07-16 23:46:16 -0700414 ${src}= Set Variable ${hosts.src[${I}]}
415 ${dst}= Set Variable ${hosts.dst[${I}]}
416 ${service_type}= Get Variable Value ${src['service_type']} "null"
Hardik Windlassc609eb02022-02-22 11:28:37 +0000417 Run Keyword IF '${service_type}' != 'mcast' Sanity Test TT one ONU ${src} ${dst}
418 ... ${supress_add_subscriber} ${maclearning_enabled}
Suchitra Vemuri85cb7d62020-07-16 23:46:16 -0700419 END
Hardik Windlass3ec9d4f2021-06-08 05:48:15 +0000420 # Verify Subscriber Access Flow Count
421 @{particular_onu_device_port}= Create List
422 FOR ${I} IN RANGE 0 ${num_all_onus}
423 ${src}= Set Variable ${hosts.src[${I}]}
424 ${of_id}= Wait Until Keyword Succeeds ${timeout} 15s Validate OLT Device in ONOS ${src['olt']}
Hardik Windlass1ed2eee2021-06-25 09:51:03 +0000425 ${onu_port}= Wait Until Keyword Succeeds ${timeout} 2s Get ONU Port in ONOS
426 ... ${src['onu']} ${of_id} ${src['uni_id']}
Hardik Windlass3ec9d4f2021-06-08 05:48:15 +0000427 Append To List ${particular_onu_device_port} ${onu_port}
428 END
429 ${list_onu_port}= Remove Duplicates ${particular_onu_device_port}
430 ${num_of_provisioned_onus}= Get Length ${list_onu_port}
431 FOR ${I} IN RANGE 0 ${olt_count}
432 ${olt_serial_number}= Get From Dictionary ${olt_ids}[${I}] sn
433 ${olt_device_id}= Get OLTDeviceID From OLT List ${olt_serial_number}
Hardik Windlass315d6152021-06-09 08:22:44 +0000434 ${of_id}= Wait Until Keyword Succeeds ${timeout} 15s Validate OLT Device in ONOS ${olt_serial_number}
Hardik Windlass3ec9d4f2021-06-08 05:48:15 +0000435 ${num_onus}= Set Variable ${list_olts}[${I}][onucount]
436 # Verify ONOS Flows
437 # Number of Access Flows on ONOS equals 16 * the Number of Active ONUs + 3 for default LLDP, IGMP and DHCP
438 ${onos_flows_count}= Run Keyword If ${has_dataplane} Evaluate 16 * ${num_of_provisioned_onus} + 3
439 ... ELSE Evaluate 15 * ${num_of_provisioned_onus} + 3
Matteo Scandoloc2f48fa2021-09-29 13:32:55 -0700440 Wait Until Keyword Succeeds ${timeout} 5s
Hardik Windlass3ec9d4f2021-06-08 05:48:15 +0000441 ... Verify Added Flow Count for OLT TT ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${of_id}
442 ... ${onos_flows_count}
Matteo Scandolo7bdbe2d2021-11-29 15:48:25 -0800443 # Verify LLDP flow in ONOS
Matteo Scandolo6a90bda2021-11-30 11:31:38 -0800444 Wait Until Keyword Succeeds ${timeout} 5s
Matteo Scandolo7bdbe2d2021-11-29 15:48:25 -0800445 ... Verify LLDP Flow Added ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${of_id} 1
Hardik Windlass3ec9d4f2021-06-08 05:48:15 +0000446 # Verify VOLTHA Flows
447 # Number of per OLT Flows equals 10 * Number of Active ONUs + 3 for default LLDP, IGMP and DHCP
448 ${olt_flows}= Run Keyword If ${has_dataplane} Evaluate 10 * ${num_of_provisioned_onus} + 3
449 ... ELSE Evaluate 9 * ${num_of_provisioned_onus} + 3
450 # Number of per ONU Flows equals 6 for 3play service data plane + 4 for Trap to Host Flows
451 ${onu_flows}= Run Keyword If ${has_dataplane} Set Variable 10
452 ... ELSE Set Variable 9
453 Run Keyword Wait Until Keyword Succeeds ${timeout} 5s Validate OLT Flows ${olt_flows}
454 ... ${olt_device_id}
455 ${List_ONU_Serial} Create List
456 Set Suite Variable ${List_ONU_Serial}
457 Build ONU SN List ${List_ONU_Serial} ${olt_serial_number} ${num_onus}
458 Log ${List_ONU_Serial}
Hardik Windlass1ed2eee2021-06-25 09:51:03 +0000459 # TODO: Fix ${onu_flows} calculations based on UNIs provisioned
460 # Run Keyword Wait Until Keyword Succeeds ${timeout} 5s Validate ONU Flows
461 # ... ${List_ONU_Serial} ${onu_flows}
Hardik Windlass3ec9d4f2021-06-08 05:48:15 +0000462 END
Suchitra Vemuri85cb7d62020-07-16 23:46:16 -0700463
Huseyin Ahmet AYDIN7cb5ae62021-10-28 11:07:27 +0000464Provision Subscription for ONU TT
465 [Documentation] This keyword performs provision services a single ONU for TT workflow
Suchitra Vemuri85cb7d62020-07-16 23:46:16 -0700466 ... Tests for one ONU
TorstenThieme70bc5262021-01-19 12:12:55 +0000467 ... For repeating sanity test without subscriber changes set flag supress_add_subscriber=True.
468 ... In all other (common) cases flag has to be set False (default).
469 [Arguments] ${src} ${dst} ${supress_add_subscriber}=False
Suchitra Vemuria6879aa2020-11-03 11:03:11 -0800470 ${of_id}= Wait Until Keyword Succeeds ${timeout} 15s Validate OLT Device in ONOS ${src['olt']}
Suchitra Vemuri2f1e07d2020-06-26 19:18:01 -0700471 Set Global Variable ${of_id}
TorstenThiemedda37652021-11-11 16:22:05 +0000472 ${nni_port}= Wait Until Keyword Succeeds ${timeout} 2s Get NNI Port in ONOS ${of_id}
Suchitra Vemuri85cb7d62020-07-16 23:46:16 -0700473 ${onu_device_id}= Get Device ID From SN ${src['onu']}
Hardik Windlass5a2d1f42021-11-12 12:52:04 +0000474 ${onu_port}= Wait Until Keyword Succeeds ${timeout} 2s
Hardik Windlass1ed2eee2021-06-25 09:51:03 +0000475 ... Get ONU Port in ONOS ${src['onu']} ${of_id} ${src['uni_id']}
Suchitra Vemuri85cb7d62020-07-16 23:46:16 -0700476 # Check ONU port is Enabled in ONOS
Hardik Windlass5a2d1f42021-11-12 12:52:04 +0000477 Wait Until Keyword Succeeds ${timeout} 2s
Hardik Windlass39015672021-07-05 05:48:08 +0000478 ... Verify UNI Port Is Enabled ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${src['onu']} ${src['uni_id']}
Hardik Windlassb1bda362021-11-24 11:54:36 +0000479 # Add subscriber
480 ${add_sub_cmd}= Run Keyword If ${unitag_sub}
481 ... Catenate volt-add-subscriber-unitag --tpId ${src['tp_id']} --sTag ${src['s_tag']}
482 ... --cTag ${src['c_tag']} ${src['onu']}-${src['uni_id']}
483 ... ELSE
484 ... Set Variable volt-add-subscriber-access ${of_id} ${onu_port}
TorstenThiemea36068c2021-02-19 09:57:32 +0000485 Run Keyword Unless ${supress_add_subscriber}
Hardik Windlassb1bda362021-11-24 11:54:36 +0000486 ... Execute ONOS CLI Command use single connection ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${add_sub_cmd}
TorstenThiemea36068c2021-02-19 09:57:32 +0000487 # Verify ONU state in voltha
Emrehan UZUNec59bea2021-05-27 13:45:57 +0000488 ${onu_reasons}= Create List omci-flows-pushed onu-reenabled
Hardik Windlass5a2d1f42021-11-12 12:52:04 +0000489 Wait Until Keyword Succeeds ${timeout} 5s Validate Device
Suchitra Vemuri85cb7d62020-07-16 23:46:16 -0700490 ... ENABLED ACTIVE REACHABLE
Matteo Scandolo74bd5c32020-12-08 09:52:19 -0800491 ... ${src['onu']} onu=True onu_reason=${onu_reasons}
Huseyin Ahmet AYDIN7cb5ae62021-10-28 11:07:27 +0000492
493Sanity Test TT one ONU
494 [Documentation] This keyword performs sanity test for a single ONU for TT workflow
495 ... Tests for one ONU
496 ... Assertions apply to HSIA, VoD, VoIP services
497 ... For repeating sanity test without subscriber changes set flag supress_add_subscriber=True.
498 ... In all other (common) cases flag has to be set False (default).
Hardik Windlassc609eb02022-02-22 11:28:37 +0000499 [Arguments] ${src} ${dst} ${supress_add_subscriber}=False ${maclearning_enabled}=False
Huseyin Ahmet AYDIN7cb5ae62021-10-28 11:07:27 +0000500 Provision Subscription for ONU TT ${src} ${dst} ${supress_add_subscriber}
501 ${of_id}= Wait Until Keyword Succeeds ${timeout} 15s Validate OLT Device in ONOS ${src['olt']}
502 Set Global Variable ${of_id}
503 ${onu_port}= Wait Until Keyword Succeeds ${timeout} 2s Get ONU Port in ONOS ${src['onu']}
504 ... ${of_id} ${src['uni_id']}
Suchitra Vemuri85cb7d62020-07-16 23:46:16 -0700505 # TODO: Yet to Verify on the GPON based Physical POD (VOL-2652)
506 Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure Validate DHCP and Ping True
507 ... True ${src['dp_iface_name']} ${src['s_tag']} ${src['c_tag']} ${dst['dp_iface_ip_qinq']}
508 ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
509 ... ${dst['dp_iface_name']} ${dst['ip']} ${dst['user']} ${dst['pass']} ${dst['container_type']}
510 ... ${dst['container_name']}
Hardik Windlassc609eb02022-02-22 11:28:37 +0000511 Run Keyword If '${src['service_type']}'!='hsia'
512 ... Run Keywords
Hardik Windlass5a2d1f42021-11-12 12:52:04 +0000513 ... Wait Until Keyword Succeeds ${timeout} 2s
Suchitra Vemuri8d3b0032020-09-11 17:49:08 -0700514 ... Validate Subscriber DHCP Allocation ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${onu_port}
Suchitra Vemuri42819412020-10-01 17:45:43 -0700515 ... ${src['c_tag']}
Hardik Windlassc609eb02022-02-22 11:28:37 +0000516 ... AND Run Keyword If ${maclearning_enabled}
517 ... Wait Until Keyword Succeeds ${timeout} 5s Validate Mac Learner Mapping in ONOS
518 ... ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${of_id} ${onu_port} ${src['c_tag']}
Suchitra Vemuri85cb7d62020-07-16 23:46:16 -0700519
520Perform Sanity Test TT MCAST
521 [Documentation] This keyword performs Sanity Test Procedure for TT Workflow
522 ... Adds subscribers
523 ... Validates for MCAST
TorstenThieme70bc5262021-01-19 12:12:55 +0000524 ... For repeating sanity test without subscriber changes set flag supress_add_subscriber=True.
525 ... In all other (common) cases flag has to be set False (default).
526 [Arguments] ${supress_add_subscriber}=False
Suchitra Vemuria6879aa2020-11-03 11:03:11 -0800527 FOR ${I} IN RANGE 0 ${num_all_onus}
Suchitra Vemuri2f1e07d2020-06-26 19:18:01 -0700528 ${src}= Set Variable ${hosts.src[${I}]}
529 ${dst}= Set Variable ${hosts.dst[${I}]}
Suchitra Vemuri85cb7d62020-07-16 23:46:16 -0700530 ${service_type}= Get Variable Value ${src['service_type']} "null"
531 Run Keyword IF '${service_type}' == 'mcast' Sanity Test TT MCAST one ONU ${src}
TorstenThiemea36068c2021-02-19 09:57:32 +0000532 ... ${dst} ${supress_add_subscriber}
Suchitra Vemuri2f1e07d2020-06-26 19:18:01 -0700533 END
Suchitra Vemuri85cb7d62020-07-16 23:46:16 -0700534
535Sanity Test TT MCAST one ONU
536 [Documentation] This keyword performs sanity test for a single ONU for TT workflow
537 ... Tests for one ONU
538 ... Assertions apply to MCAST services
TorstenThieme70bc5262021-01-19 12:12:55 +0000539 ... For repeating sanity test without subscriber changes set flag supress_add_subscriber=True.
540 ... In all other (common) cases flag has to be set False (default).
541 [Arguments] ${src} ${dst} ${supress_add_subscriber}=False
Suchitra Vemuri85cb7d62020-07-16 23:46:16 -0700542 # Check for iperf and jq tools
543 ${stdout} ${stderr} ${rc}= Execute Remote Command which iperf jq
544 ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']}
545 ... ${src['container_name']}
546 Pass Execution If ${rc} != 0 Skipping test: iperf / jq not found on the RG
547
548 #Reset the IP on the interface
549 ${output}= Login And Run Command On Remote System sudo ifconfig ${src['dp_iface_name']} 0
550 ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
551 # Kill iperf on BNG
552 ${rg_output}= Run Keyword and Continue On Failure Login And Run Command On Remote System
553 ... sudo kill -9 `pidof iperf`
554 ... ${dst['bng_ip']} ${dst['bng_user']} ${dst['bng_pass']} ${dst['container_type']}
555 ... ${dst['container_name']}
556
557 # Setup RG for Multi-cast test
558 ${output}= Login And Run Command On Remote System
559 ... sudo ifconfig ${src['dp_iface_name']} ${src['mcast_rg']} up ; sudo kill -9 `pidof iperf`
560 ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
561 ${output}= Login And Run Command On Remote System
562 ... sudo ip route add ${src['mcast_grp_subnet_mask']} dev ${src['dp_iface_name']} scope link
563 ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
564
565 # Perform operations for adding subscriber
Suchitra Vemuria6879aa2020-11-03 11:03:11 -0800566 ${of_id}= Wait Until Keyword Succeeds ${timeout} 15s Validate OLT Device in ONOS ${src['olt']}
Suchitra Vemuri85cb7d62020-07-16 23:46:16 -0700567 Set Global Variable ${of_id}
TorstenThiemedda37652021-11-11 16:22:05 +0000568 ${nni_port}= Wait Until Keyword Succeeds ${timeout} 2s Get NNI Port in ONOS ${of_id}
Suchitra Vemuri85cb7d62020-07-16 23:46:16 -0700569 ${onu_device_id}= Get Device ID From SN ${src['onu']}
Hardik Windlass5a2d1f42021-11-12 12:52:04 +0000570 ${onu_port}= Wait Until Keyword Succeeds ${timeout} 2s
Hardik Windlass1ed2eee2021-06-25 09:51:03 +0000571 ... Get ONU Port in ONOS ${src['onu']} ${of_id} ${src['uni_id']}
Suchitra Vemuri85cb7d62020-07-16 23:46:16 -0700572 # Check ONU port is Enabled in ONOS
Hardik Windlass5a2d1f42021-11-12 12:52:04 +0000573 Wait Until Keyword Succeeds ${timeout} 2s
Hardik Windlass39015672021-07-05 05:48:08 +0000574 ... Verify UNI Port Is Enabled ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${src['onu']} ${src['uni_id']}
TorstenThiemea36068c2021-02-19 09:57:32 +0000575 Run Keyword Unless ${supress_add_subscriber}
TorstenThieme4e2168e2021-06-22 14:01:47 +0000576 ... Execute ONOS CLI Command use single connection ${ONOS_SSH_IP} ${ONOS_SSH_PORT}
Suchitra Vemuri85cb7d62020-07-16 23:46:16 -0700577 ... volt-add-subscriber-access ${of_id} ${onu_port}
TorstenThiemea36068c2021-02-19 09:57:32 +0000578 # Verify ONU state in voltha
Emrehan UZUNec59bea2021-05-27 13:45:57 +0000579 ${onu_reasons}= Create List omci-flows-pushed onu-reenabled
Hardik Windlass5a2d1f42021-11-12 12:52:04 +0000580 Wait Until Keyword Succeeds ${timeout} 5s Validate Device
Suchitra Vemuri85cb7d62020-07-16 23:46:16 -0700581 ... ENABLED ACTIVE REACHABLE
Matteo Scandolo74bd5c32020-12-08 09:52:19 -0800582 ... ${src['onu']} onu=True onu_reason=${onu_reasons}
Suchitra Vemuri85cb7d62020-07-16 23:46:16 -0700583
584 # Setup iperf on the BNG
585 ${server_output}= Login And Run Command On Remote System
586 ... sudo iperf -c ${dst['dp_iface_ip_qinq']} -u -T 32 -t 60 -i 1 &
587 ... ${dst['bng_ip']} ${dst['bng_user']} ${dst['bng_pass']} ${dst['container_type']}
588 ... ${dst['container_name']}
589
590 # Setup iperf on the RG
591 ${rg_output}= Run Keyword and Continue On Failure Wait Until Keyword Succeeds 90s 5s
592 ... Login And Run Command On Remote System
593 ... rm -rf /tmp/rg_output ; sudo iperf -s -u -B ${dst['dp_iface_ip_qinq']} -i 1 -D >> /tmp/rg_output
594 ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
595 Log ${rg_output}
596 Sleep 60s
597 ${output}= Run Keyword and Continue On Failure Wait Until Keyword Succeeds 90s 5s
598 ... Login And Run Command On Remote System
599 ... cat /tmp/rg_output | grep KBytes
600 ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
601 Log ${output}
602 Should Contain ${output} KBytes
603
604 # Kill iperf on BNG
605 ${rg_output}= Run Keyword and Continue On Failure Login And Run Command On Remote System
606 ... sudo kill -9 `pidof iperf`
607 ... ${dst['bng_ip']} ${dst['bng_user']} ${dst['bng_pass']} ${dst['container_type']}
608 ... ${dst['container_name']}
609
610 # Kill iperf on the RG
611 ${output}= Run Keyword and Continue On Failure Login And Run Command On Remote System
612 ... sudo kill -9 `pidof iperf`
613 ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
614
Hardik Windlass62db9d92021-05-17 09:32:40 +0000615Setup Soak
616 [Documentation] Pre-test Setup for Soak Job
617 ${olt_ids} Create List
618 FOR ${I} IN RANGE 0 ${num_olts}
619 ${olt_serial_number}= Set Variable ${list_olts}[${I}][sn]
620 ${olt_device_id}= Get Device ID From SN ${olt_serial_number}
621 ${logical_id}= Get Logical Device ID From SN ${olt_serial_number}
622 ${of_id}= Wait Until Keyword Succeeds ${timeout} 15s Validate OLT Device in ONOS
623 ... ${olt_serial_number}
TorstenThiemedda37652021-11-11 16:22:05 +0000624 ${nni_port}= Wait Until Keyword Succeeds ${timeout} 2s Get NNI Port in ONOS ${of_id}
Hardik Windlass62db9d92021-05-17 09:32:40 +0000625 ${olt} Create Dictionary device_id ${olt_device_id} logical_id ${logical_id}
626 ... of_id ${of_id} sn ${olt_serial_number}
627 Append To List ${olt_ids} ${olt}
628 END
629 Set Global Variable ${olt_ids}
Suchitra Vemuri2f1e07d2020-06-26 19:18:01 -0700630
Gayathri.Selvanee4a91b2020-01-17 06:49:53 +0000631Setup
632 [Documentation] Pre-test Setup
Hardik Windlass4ed54502021-05-14 07:34:15 +0000633 [Arguments] ${skip_empty_device_list_test}=False
Gayathri.Selvanee4a91b2020-01-17 06:49:53 +0000634 #test for empty device list
Hardik Windlass4ed54502021-05-14 07:34:15 +0000635 Run Keyword If '${skip_empty_device_list_test}'=='False' Test Empty Device List
Hardik Windlass5e214b22021-02-26 10:37:14 +0000636 # TBD: Need for this Sleep
637 Run Keyword If ${has_dataplane} Sleep 180s
Suchitra Vemuria6879aa2020-11-03 11:03:11 -0800638 # Create a list of olt ids (logical and device_id)
639 ${olt_ids} Create List
640 FOR ${I} IN RANGE 0 ${num_olts}
641 #create/preprovision device
Andrea Campanella3dcce272021-01-15 16:04:47 +0100642 ${olt_device_id}= Run Keyword If "${list_olts}[${I}][type]" == "${None}"
Suchitra Vemuri09f878d2021-02-10 18:19:04 -0800643 ... Create Device ${list_olts}[${I}][ip] ${list_olts}[${I}][oltport]
644 ... ELSE Create Device ${list_olts}[${I}][ip] ${list_olts}[${I}][oltport] ${list_olts}[${I}][type]
Suchitra Vemuria6879aa2020-11-03 11:03:11 -0800645 ${olt_serial_number}= Set Variable ${list_olts}[${I}][sn]
646 #Set Suite Variable ${olt_device_id}
647 #validate olt states
648 Wait Until Keyword Succeeds ${timeout} 5s
Hardik Windlass8b446492021-06-10 06:25:23 +0000649 ... Validate OLT Device PREPROVISIONED UNKNOWN UNKNOWN ${olt_device_id} by_dev_id=True
Suchitra Vemuria6879aa2020-11-03 11:03:11 -0800650 Sleep 5s
651 Enable Device ${olt_device_id}
Suchitra Vemuricf6e89c2021-03-24 19:14:15 -0700652 # Increasing the timer to incorporate wait time for in-band
653 Wait Until Keyword Succeeds 540s 5s
Suchitra Vemuria6879aa2020-11-03 11:03:11 -0800654 ... Validate OLT Device ENABLED ACTIVE REACHABLE ${olt_serial_number}
655 ${logical_id}= Get Logical Device ID From SN ${olt_serial_number}
656 # Set Suite Variable ${logical_id}
657 ${of_id}= Wait Until Keyword Succeeds ${timeout} 15s Validate OLT Device in ONOS
658 ... ${olt_serial_number}
659 ${olt} Create Dictionary device_id ${olt_device_id} logical_id ${logical_id}
660 ... of_id ${of_id} sn ${olt_serial_number}
661 Append To List ${olt_ids} ${olt}
662 END
663 Set Global Variable ${olt_ids}
664
665Get ofID From OLT List
666 [Documentation] Retrieves the corresponding of_id for the OLT serial number specified
667 [Arguments] ${serial_number}
668 FOR ${I} IN RANGE 0 ${olt_count}
669 ${sn}= Get From Dictionary ${olt_ids}[${I}] sn
Andrea Campanella317a94c2020-11-13 10:38:19 +0100670 ${of_id}= Run Keyword IF "${serial_number}"=="${sn}"
671 ... Get From Dictionary ${olt_ids}[${I}] of_id ELSE Set Variable ${of_id}
Suchitra Vemuria6879aa2020-11-03 11:03:11 -0800672 END
673 [Return] ${of_id}
674
675Get OLTDeviceID From OLT List
676 [Documentation] Retrieves the corresponding olt_device_id for the OLT serial number specified
677 [Arguments] ${serial_number}
Suchitra Vemuri4b8f4f52020-11-17 19:12:50 -0800678 ${olt_device_id}= Set Variable 0
Suchitra Vemuria6879aa2020-11-03 11:03:11 -0800679 FOR ${I} IN RANGE 0 ${olt_count}
680 ${sn}= Get From Dictionary ${olt_ids}[${I}] sn
Andrea Campanella317a94c2020-11-13 10:38:19 +0100681 ${olt_device_id}= Run Keyword IF "${serial_number}"=="${sn}"
682 ... Get From Dictionary ${olt_ids}[${I}] device_id ELSE Set Variable ${olt_device_id}
Suchitra Vemuria6879aa2020-11-03 11:03:11 -0800683 END
684 [Return] ${olt_device_id}
Gayathri.Selvanee4a91b2020-01-17 06:49:53 +0000685
Andrea Campanellad848de02020-11-24 10:23:41 +0100686Get Num of Onus From OLT SN
687 [Documentation] Retrieves the corresponding number of ONUs for a given OLT based on serial number specified
688 [Arguments] ${serial_number}
689 ${num_of_olt_onus}= Set Variable 0
690 FOR ${I} IN RANGE 0 ${olt_count}
691 ${sn}= Get From Dictionary ${olt_ids}[${I}] sn
692 ${num_of_olt_onus}= Run Keyword IF "${serial_number}"=="${sn}"
693 ... Get From Dictionary ${list_olts}[${I}] onucount ELSE Set Variable ${num_of_olt_onus}
694 END
695 [Return] ${num_of_olt_onus}
696
Hardik Windlassaaea3402020-03-10 19:45:45 +0530697Validate ONUs After OLT Disable
698 [Documentation] Validates the ONUs state in Voltha, ONUs port state in ONOS
699 ... and that pings do not succeed After corresponding OLT is Disabled
Andrea Campanella4e507882020-11-26 11:33:11 +0100700 [Arguments] ${num_onus} ${olt_serial_number}
Hardik Windlassaaea3402020-03-10 19:45:45 +0530701 FOR ${I} IN RANGE 0 ${num_onus}
702 ${src}= Set Variable ${hosts.src[${I}]}
703 ${dst}= Set Variable ${hosts.dst[${I}]}
Andrea Campanella4e507882020-11-26 11:33:11 +0100704 Continue For Loop If "${olt_serial_number}"!="${src['olt']}"
Suchitra Vemuria6879aa2020-11-03 11:03:11 -0800705 ${of_id}= Get ofID From OLT List ${src['olt']}
Hardik Windlassaaea3402020-03-10 19:45:45 +0530706 ${onu_device_id}= Get Device ID From SN ${src['onu']}
707 ${onu_port}= Wait Until Keyword Succeeds ${timeout} 2s Get ONU Port in ONOS ${src['onu']}
708 ... ${of_id}
Girish Gowdra3f0fadb2021-11-08 16:49:28 -0800709 ${valid_onu_states}= Create List stopping-openomci omci-flows-deleted
Hardik Windlassaaea3402020-03-10 19:45:45 +0530710 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
711 ... Validate Device ENABLED DISCOVERED
Girish Gowdra3f0fadb2021-11-08 16:49:28 -0800712 ... UNREACHABLE ${src['onu']} onu=True onu_reason=${valid_onu_states}
Hardik Windlassaaea3402020-03-10 19:45:45 +0530713 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s
Emrehan UZUNabef5182021-11-26 10:54:24 +0000714 ... Verify UNI Port Is Disabled ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${src['onu']} ${src['uni_id']}
Hardik Windlassaaea3402020-03-10 19:45:45 +0530715 Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure
716 ... Wait Until Keyword Succeeds 60s 2s
717 ... Check Ping False ${dst['dp_iface_ip_qinq']} ${src['dp_iface_name']}
718 ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
Hardik Windlassaaea3402020-03-10 19:45:45 +0530719 END
720
Gayathri.Selvanee4a91b2020-01-17 06:49:53 +0000721Delete All Devices and Verify
722 [Documentation] Remove any devices from VOLTHA and ONOS
Hardik Windlassc609eb02022-02-22 11:28:37 +0000723 [Arguments] ${maclearning_enabled}=False
Gayathri.Selvanee4a91b2020-01-17 06:49:53 +0000724 # Clear devices from VOLTHA
725 Disable Devices In Voltha Root=true
726 Wait Until Keyword Succeeds ${timeout} 2s Test Devices Disabled In Voltha Root=true
727 Delete Devices In Voltha Root=true
728 Wait Until Keyword Succeeds ${timeout} 2s Test Empty Device List
Hardik Windlasse8b99222021-01-25 10:03:14 +0000729 FOR ${I} IN RANGE 0 ${num_olts}
730 ${olt_serial_number}= Set Variable ${list_olts}[${I}][sn]
Matteo Scandolo71ff08a2021-10-21 17:47:27 -0700731 Wait Until Keyword Succeeds ${timeout} 5s
Hardik Windlasse8b99222021-01-25 10:03:14 +0000732 ... Validate Deleted Device Cleanup In ONOS ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${olt_serial_number}
Hardik Windlassc609eb02022-02-22 11:28:37 +0000733 ... ${maclearning_enabled}
Hardik Windlasse8b99222021-01-25 10:03:14 +0000734 END
Hardik Windlass44abec12021-09-27 07:52:33 +0000735 Wait Until Keyword Succeeds ${timeout} 5s Validate Cleanup In ETCD ${INFRA_NAMESPACE}
Gayathri.Selvanee4a91b2020-01-17 06:49:53 +0000736
737Teardown
738 [Documentation] kills processes and cleans up interfaces on src+dst servers
739 Run Keyword If ${has_dataplane} Clean Up Linux
Gayathri.Selvanee4a91b2020-01-17 06:49:53 +0000740
741Teardown Suite
742 [Documentation] Clean up device if desired
Andrea Campanella82add372021-11-05 12:01:15 +0100743 Start Logging Setup or Teardown Teardown-${SUITE NAME}
Hardik Windlass81375222021-12-02 10:48:01 +0000744 Run Keyword If ${has_dataplane} Clean Up Linux
Gayathri.Selvanee4a91b2020-01-17 06:49:53 +0000745 Run Keyword If ${teardown_device} Delete All Devices and Verify
Andrea Campanella1ff03222021-09-10 10:14:21 +0200746 Run Keyword And Continue On Failure Collect Logs
TorstenThieme4e2168e2021-06-22 14:01:47 +0000747 Close All ONOS SSH Connections
Hardik Windlass81375222021-12-02 10:48:01 +0000748 Run Keyword If ${has_dataplane} Clean Up All Nodes
Andrea Campanella82add372021-11-05 12:01:15 +0100749 Stop Logging Setup or Teardown Teardown-${SUITE NAME}
Gayathri.Selvanee4a91b2020-01-17 06:49:53 +0000750
751Delete Device and Verify
Suchitra Vemuria6879aa2020-11-03 11:03:11 -0800752 [Arguments] ${olt_serial_number}
Gayathri.Selvanee4a91b2020-01-17 06:49:53 +0000753 [Documentation] Disable -> Delete devices via voltctl and verify its removed
Suchitra Vemuri2fa9bba2020-01-22 17:38:48 -0800754 ${olt_device_id}= Get Device ID From SN ${olt_serial_number}
Gayathri.Selvanee4a91b2020-01-17 06:49:53 +0000755 ${rc} ${output}= Run and Return Rc and Output
Matteo Scandolo5899be12020-11-11 15:38:07 -0800756 ... voltctl -c ${VOLTCTL_CONFIG} device disable ${olt_device_id}
Gayathri.Selvanee4a91b2020-01-17 06:49:53 +0000757 Should Be Equal As Integers ${rc} 0
758 Sleep 5s
759 Wait Until Keyword Succeeds ${timeout} 5s
760 ... Validate OLT Device DISABLED UNKNOWN REACHABLE ${olt_serial_number}
761 ${rc} ${output}= Run and Return Rc and Output
Matteo Scandolo5899be12020-11-11 15:38:07 -0800762 ... voltctl -c ${VOLTCTL_CONFIG} device delete ${olt_device_id}
Hardik Windlassdf5035e2021-01-27 08:34:59 +0000763 Sleep 50s
Gayathri.Selvanee4a91b2020-01-17 06:49:53 +0000764 Should Be Equal As Integers ${rc} 0
765 Wait Until Keyword Succeeds ${timeout} 5s Validate Device Removed ${olt_device_id}
Hardik Windlasse8b99222021-01-25 10:03:14 +0000766 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 15s
767 ... Validate Deleted Device Cleanup In ONOS ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${olt_serial_number}
Gayathri.Selvanee4a91b2020-01-17 06:49:53 +0000768
Gayathri.Selvan283a63c2020-01-23 04:09:18 +0000769Repeat Sanity Test
770 [Documentation] This keyword performs Sanity Test Procedure
771 ... Sanity test performs authentication, dhcp and pings for all the ONUs given for the POD
772 ... This keyword can be used to call in any other tests where sanity check is required
773 ... with wpa reassociation
774 ${of_id}= Wait Until Keyword Succeeds ${timeout} 15s Validate OLT Device in ONOS ${olt_serial_number}
775 Set Global Variable ${of_id}
Suchitra Vemuria6879aa2020-11-03 11:03:11 -0800776 FOR ${I} IN RANGE 0 ${num_all_onus}
Gayathri.Selvan283a63c2020-01-23 04:09:18 +0000777 ${src}= Set Variable ${hosts.src[${I}]}
778 ${dst}= Set Variable ${hosts.dst[${I}]}
Suchitra Vemuri8078b972020-02-06 19:07:41 -0800779 ${onu_port}= Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s
Emrehan UZUNabef5182021-11-26 10:54:24 +0000780 ... Get ONU Port in ONOS ${src['onu']} ${of_id} ${src['uni_id']}
Suchitra Vemuri8078b972020-02-06 19:07:41 -0800781 # Check ONU port is Enabled in ONOD
782 Run Keyword And Continue On Failure Wait Until Keyword Succeeds 120s 2s
Emrehan UZUNabef5182021-11-26 10:54:24 +0000783 ... Verify UNI Port Is Enabled ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${src['onu']} ${src['uni_id']}
Suchitra Vemuri8078b972020-02-06 19:07:41 -0800784 # Verify EAPOL flows are added for the ONU port
785 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s
Matteo Scandolo7e519fb2021-08-13 11:35:16 -0700786 ... Verify Eapol Flows Added For ONU ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${of_id} ${onu_port}
Suchitra Vemuri8078b972020-02-06 19:07:41 -0800787 # Verify ONU state in voltha
Suchitra Vemurid1e27fb2020-02-01 16:34:37 -0800788 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s Validate Device
Suchitra Vemuri81e4f022020-02-01 13:16:02 -0800789 ... ENABLED ACTIVE REACHABLE
790 ... ${src['onu']} onu=True onu_reason=omci-flows-pushed
Suchitra Vemuri8078b972020-02-06 19:07:41 -0800791 # Perform Authentication
Gayathri.Selvan283a63c2020-01-23 04:09:18 +0000792 Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure
793 ... Validate Authentication After Reassociate
794 ... True ${src['dp_iface_name']} ${src['ip']} ${src['user']} ${src['pass']}
795 ... ${src['container_type']} ${src['container_name']}
796 Wait Until Keyword Succeeds ${timeout} 2s
David K. Bainbridgec0617c92020-03-05 21:17:19 -0800797 ... Verify ONU in AAA-Users ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${onu_port}
Gayathri.Selvan283a63c2020-01-23 04:09:18 +0000798 Wait Until Keyword Succeeds ${timeout} 2s
TorstenThieme4e2168e2021-06-22 14:01:47 +0000799 ... Execute ONOS CLI Command use single connection ${ONOS_SSH_IP} ${ONOS_SSH_PORT}
Gayathri.Selvan283a63c2020-01-23 04:09:18 +0000800 ... volt-add-subscriber-access ${of_id} ${onu_port}
801 Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure
802 ... Validate DHCP and Ping True True
803 ... ${src['dp_iface_name']} ${src['s_tag']} ${src['c_tag']} ${dst['dp_iface_ip_qinq']}
804 ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
805 ... ${dst['dp_iface_name']} ${dst['ip']} ${dst['user']} ${dst['pass']} ${dst['container_type']}
806 ... ${dst['container_name']}
807 Wait Until Keyword Succeeds ${timeout} 2s Run Keyword And Continue On Failure
David K. Bainbridgec0617c92020-03-05 21:17:19 -0800808 ... Validate Subscriber DHCP Allocation ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${onu_port}
Gayathri.Selvan283a63c2020-01-23 04:09:18 +0000809 END
Gayathri.Selvanb6a2b542020-01-24 07:24:23 +0000810
Hardik Windlass41701e82021-01-12 17:44:44 +0000811Disable Enable PON Port Per OLT
812 [Arguments] ${olt_serial_number}
813 [Documentation] This keyword disables and then enables OLT PON port and
814 ... also validate ONUs for each corresponding case
815 ${olt_device_id}= Get OLTDeviceID From OLT List ${olt_serial_number}
816 ${olt_pon_port_list}= Retrieve OLT PON Ports ${olt_device_id}
817 ${olt_pon_port_list_len}= Get Length ${olt_pon_port_list}
818 FOR ${INDEX0} IN RANGE 0 ${olt_pon_port_list_len}
819 ${olt_pon_port}= Get From List ${olt_pon_port_list} ${INDEX0}
820 ${olt_peer_list}= Retrieve Peer List From OLT PON Port ${olt_device_id} ${olt_pon_port}
821 # Disable the OLT PON Port and Validate OLT Device
822 DisableOrEnable OLT PON Port disable ${olt_device_id} ${olt_pon_port}
823 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
824 ... Validate OLT PON Port Status ${olt_device_id} ${olt_pon_port}
825 ... DISABLED DISCOVERED
826 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
827 ... Validate OLT Device ENABLED ACTIVE REACHABLE
828 ... ${olt_serial_number}
829 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
830 ... Validate ONUs for PON OLT Disable ${olt_serial_number} ${olt_peer_list}
831 # Enable the OLT PON Port back, and check ONU status are back to "ACTIVE"
832 DisableOrEnable OLT PON Port enable ${olt_device_id} ${olt_pon_port}
833 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
834 ... Validate OLT PON Port Status ${olt_device_id} ${olt_pon_port}
835 ... ENABLED ACTIVE
836 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
837 ... Validate ONUs for PON OLT Enable ${olt_serial_number} ${olt_peer_list}
838 END
839
Hardik Windlass16cdf962020-04-29 15:26:50 +0530840Validate ONUs for PON OLT Disable
Hardik Windlass41701e82021-01-12 17:44:44 +0000841 [Arguments] ${olt_sn} ${olt_peer_list}
Hardik Windlass16cdf962020-04-29 15:26:50 +0530842 [Documentation] This keyword validates that Ping fails for ONUs connected to Disabled OLT PON port
843 ... And Pings succeed for other Active OLT PON port ONUs
844 ... Also it removes subscriber for Disabled OLT PON port ONUs to replicate ATT workflow
Hardik Windlass41701e82021-01-12 17:44:44 +0000845 FOR ${I} IN RANGE 0 ${num_all_onus}
Hardik Windlass16cdf962020-04-29 15:26:50 +0530846 ${src}= Set Variable ${hosts.src[${I}]}
847 ${dst}= Set Variable ${hosts.dst[${I}]}
Hardik Windlass41701e82021-01-12 17:44:44 +0000848 Continue For Loop If "${olt_sn}"!="${src['olt']}"
Hardik Windlass16cdf962020-04-29 15:26:50 +0530849 ${onu_device_id}= Get Device ID From SN ${src['onu']}
Hardik Windlass41701e82021-01-12 17:44:44 +0000850 ${of_id}= Wait Until Keyword Succeeds ${timeout} 15s Validate OLT Device in ONOS ${src['olt']}
Hardik Windlass16cdf962020-04-29 15:26:50 +0530851 ${onu_port}= Wait Until Keyword Succeeds ${timeout} 2s Get ONU Port in ONOS ${src['onu']}
Hardik Windlass1ed2eee2021-06-25 09:51:03 +0000852 ... ${of_id} ${src['uni_id']}
Hardik Windlass16cdf962020-04-29 15:26:50 +0530853 ${matched}= Match ONU in PON OLT Peer List ${olt_peer_list} ${onu_device_id}
854 Run Keyword If ${matched}
855 ... Run Keywords
856 ... Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
857 ... Validate Device ENABLED DISCOVERED
Andrea Campanellaa9b59b42021-09-21 16:13:17 +0000858 ... UNREACHABLE ${src['onu']} onu=True onu_reason=omci-flows-deleted
Hardik Windlass16cdf962020-04-29 15:26:50 +0530859 ... AND Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s
Hardik Windlass39015672021-07-05 05:48:08 +0000860 ... Verify UNI Port Is Disabled ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${src['onu']} ${src['uni_id']}
Hardik Windlass16cdf962020-04-29 15:26:50 +0530861 ... AND Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure
862 ... Wait Until Keyword Succeeds 60s 2s
863 ... Check Ping False ${dst['dp_iface_ip_qinq']} ${src['dp_iface_name']}
864 ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']}
865 ... ${src['container_name']}
866 # Remove Subscriber Access (To replicate ATT workflow)
TorstenThieme4e2168e2021-06-22 14:01:47 +0000867 ... AND Wait Until Keyword Succeeds ${timeout} 2s Execute ONOS CLI Command use single connection
868 ... ${ONOS_SSH_IP} ${ONOS_SSH_PORT} volt-remove-subscriber-access ${of_id} ${onu_port}
Hardik Windlass223a1732021-07-09 05:21:40 +0000869 # Additional Sleep to let subscriber delete process
870 ... AND Sleep 5s
Hardik Windlass16cdf962020-04-29 15:26:50 +0530871 ... ELSE
872 ... Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure
873 ... Wait Until Keyword Succeeds 60s 2s
874 ... Check Ping True ${dst['dp_iface_ip_qinq']} ${src['dp_iface_name']}
875 ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']}
876 ... ${src['container_name']}
Hardik Windlass16cdf962020-04-29 15:26:50 +0530877 END
878
879Validate ONUs for PON OLT Enable
Hardik Windlass41701e82021-01-12 17:44:44 +0000880 [Arguments] ${olt_sn} ${olt_peer_list}
Hardik Windlass16cdf962020-04-29 15:26:50 +0530881 [Documentation] This keyword validates Ping succeeds for all Enabled/Acitve OLT PON ports
882 ... Also performs Auth/subscriberAdd/DHCP/Ping for the ONUs on Re-Enabled OLT PON port
Suchitra Vemuria6879aa2020-11-03 11:03:11 -0800883 FOR ${I} IN RANGE 0 ${num_all_onus}
Hardik Windlass16cdf962020-04-29 15:26:50 +0530884 ${src}= Set Variable ${hosts.src[${I}]}
885 ${dst}= Set Variable ${hosts.dst[${I}]}
Hardik Windlass41701e82021-01-12 17:44:44 +0000886 Continue For Loop If "${olt_sn}"!="${src['olt']}"
Hardik Windlass16cdf962020-04-29 15:26:50 +0530887 ${onu_device_id}= Get Device ID From SN ${src['onu']}
Hardik Windlass41701e82021-01-12 17:44:44 +0000888 ${of_id}= Wait Until Keyword Succeeds ${timeout} 15s Validate OLT Device in ONOS ${src['olt']}
TorstenThiemedda37652021-11-11 16:22:05 +0000889 ${nni_port}= Wait Until Keyword Succeeds ${timeout} 2s Get NNI Port in ONOS ${of_id}
Hardik Windlass16cdf962020-04-29 15:26:50 +0530890 ${onu_port}= Wait Until Keyword Succeeds ${timeout} 2s Get ONU Port in ONOS ${src['onu']}
Hardik Windlass1ed2eee2021-06-25 09:51:03 +0000891 ... ${of_id} ${src['uni_id']}
Hardik Windlass16cdf962020-04-29 15:26:50 +0530892 ${matched}= Match ONU in PON OLT Peer List ${olt_peer_list} ${onu_device_id}
893 ${wpa_log}= Run Keyword If ${has_dataplane} and ${matched} Catenate SEPARATOR=.
894 ... /tmp/wpa ${src['dp_iface_name']} log
895 Run Keyword If ${matched}
896 ... Run Keywords
897 # Perform Cleanup
898 ... Run Keyword If ${has_dataplane} Clean Up Linux ${onu_device_id}
899 # Verify ONU port status
900 ... AND Run Keyword And Continue On Failure Wait Until Keyword Succeeds 120s 2s
Hardik Windlass39015672021-07-05 05:48:08 +0000901 ... Verify UNI Port Is Enabled ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${src['onu']} ${src['uni_id']}
Hardik Windlass16cdf962020-04-29 15:26:50 +0530902 # Verify EAPOL flows are added for the ONU port
903 ... AND Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s
Matteo Scandolo7e519fb2021-08-13 11:35:16 -0700904 ... Verify Eapol Flows Added For ONU ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${of_id} ${onu_port}
Hardik Windlass16cdf962020-04-29 15:26:50 +0530905 # Verify ONU state in voltha
906 ... AND Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
907 ... Validate Device ENABLED ACTIVE REACHABLE
908 ... ${src['onu']} onu=True onu_reason=omci-flows-pushed
909 # Perform Authentication
910 ... AND Run Keyword If ${has_dataplane}
911 ... Run Keyword And Continue On Failure Validate Authentication True
912 ... ${src['dp_iface_name']} wpa_supplicant.conf ${src['ip']} ${src['user']} ${src['pass']}
913 ... ${src['container_type']} ${src['container_name']} ${wpa_log}
914 ... AND Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2
915 ... Verify ONU in AAA-Users ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${onu_port}
916 ... AND Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2
TorstenThieme4e2168e2021-06-22 14:01:47 +0000917 ... Execute ONOS CLI Command use single connection ${ONOS_SSH_IP} ${ONOS_SSH_PORT}
Hardik Windlass16cdf962020-04-29 15:26:50 +0530918 ... volt-add-subscriber-access ${of_id} ${onu_port}
919 # Verify that no pending flows exist for the ONU port
920 ... AND Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s
921 ... Verify No Pending Flows For ONU ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${onu_port}
922 # Verify subscriber access flows are added for the ONU port
923 ... AND Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
924 ... Verify Subscriber Access Flows Added For ONU ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${of_id}
925 ... ${onu_port} ${nni_port} ${src['c_tag']} ${src['s_tag']}
926 ... AND Run Keyword If ${has_dataplane}
927 ... Run Keyword And Continue On Failure Validate DHCP and Ping True
928 ... True ${src['dp_iface_name']} ${src['s_tag']} ${src['c_tag']} ${dst['dp_iface_ip_qinq']}
929 ... ${src['ip']} ${src['user']} ${src['pass']}
930 ... ${src['container_type']} ${src['container_name']}
931 ... ${dst['dp_iface_name']} ${dst['ip']} ${dst['user']} ${dst['pass']}
932 ... ${dst['container_type']} ${dst['container_name']}
933 ... AND Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s
934 ... Validate Subscriber DHCP Allocation ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${onu_port}
935 ... AND Run Keyword and Ignore Error Get Device Output from Voltha ${onu_device_id}
936 ... ELSE
937 ... Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure
938 ... Wait Until Keyword Succeeds 60s 2s
939 ... Check Ping True ${dst['dp_iface_ip_qinq']} ${src['dp_iface_name']}
940 ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']}
941 ... ${src['container_name']}
Hardik Windlass16cdf962020-04-29 15:26:50 +0530942 END
943
Hardik Windlass41701e82021-01-12 17:44:44 +0000944Disable Enable PON Port Per OLT DT
945 [Arguments] ${olt_serial_number}
946 [Documentation] This keyword disables and then enables OLT PON port and
947 ... also validate ONUs for each corresponding case
948 ${olt_device_id}= Get OLTDeviceID From OLT List ${olt_serial_number}
949 ${olt_pon_port_list}= Retrieve OLT PON Ports ${olt_device_id}
950 ${olt_pon_port_list_len}= Get Length ${olt_pon_port_list}
951 FOR ${INDEX0} IN RANGE 0 ${olt_pon_port_list_len}
952 ${olt_pon_port}= Get From List ${olt_pon_port_list} ${INDEX0}
953 ${olt_peer_list}= Retrieve Peer List From OLT PON Port ${olt_device_id} ${olt_pon_port}
TorstenThieme17d6fd22021-09-23 10:00:08 +0000954 ${olt_peer_list_len}= Get Length ${olt_peer_list}
Hardik Windlass41701e82021-01-12 17:44:44 +0000955 # Disable the OLT PON Port and Validate OLT Device
956 DisableOrEnable OLT PON Port disable ${olt_device_id} ${olt_pon_port}
957 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
958 ... Validate OLT PON Port Status ${olt_device_id} ${olt_pon_port}
959 ... DISABLED DISCOVERED
960 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
961 ... Validate OLT Device ENABLED ACTIVE REACHABLE
962 ... ${olt_serial_number}
Hardik Windlass5d537ad2021-11-16 06:01:54 +0000963 Wait Until Keyword Succeeds ${timeout} 5s
Hardik Windlass41701e82021-01-12 17:44:44 +0000964 ... Validate ONUs for PON OLT Disable DT ${olt_serial_number} ${olt_peer_list}
Hardik Windlass41701e82021-01-12 17:44:44 +0000965 # Enable the OLT PON Port back, and check ONU status are back to "ACTIVE"
966 DisableOrEnable OLT PON Port enable ${olt_device_id} ${olt_pon_port}
Hardik Windlass5d537ad2021-11-16 06:01:54 +0000967 Wait Until Keyword Succeeds ${timeout} 5s
Hardik Windlass41701e82021-01-12 17:44:44 +0000968 ... Validate OLT PON Port Status ${olt_device_id} ${olt_pon_port}
969 ... ENABLED ACTIVE
TorstenThieme17d6fd22021-09-23 10:00:08 +0000970 ${olt_peer_list_new}= Wait Until Keyword Succeeds ${timeout} 5s
971 ... Retrieve Peer List From OLT PON Port ${olt_device_id} ${olt_pon_port} ${olt_peer_list_len}
Hardik Windlass5d537ad2021-11-16 06:01:54 +0000972 Wait Until Keyword Succeeds ${timeout} 5s
Hardik Windlass41701e82021-01-12 17:44:44 +0000973 ... Validate ONUs for PON OLT Enable DT ${olt_serial_number} ${olt_peer_list_new}
974 END
975
Hardik Windlass16cdf962020-04-29 15:26:50 +0530976Validate ONUs for PON OLT Disable DT
Hardik Windlass41701e82021-01-12 17:44:44 +0000977 [Arguments] ${olt_sn} ${olt_peer_list}
Hardik Windlass16cdf962020-04-29 15:26:50 +0530978 [Documentation] This keyword validates that Ping fails for ONUs connected to Disabled OLT PON port
979 ... And Pings succeed for other Active OLT PON port ONUs
980 ... Also it removes subscriber and deletes ONUs for Disabled OLT PON port to replicate DT workflow
Suchitra Vemuria6879aa2020-11-03 11:03:11 -0800981 FOR ${I} IN RANGE 0 ${num_all_onus}
Hardik Windlass16cdf962020-04-29 15:26:50 +0530982 ${src}= Set Variable ${hosts.src[${I}]}
983 ${dst}= Set Variable ${hosts.dst[${I}]}
Hardik Windlass41701e82021-01-12 17:44:44 +0000984 Continue For Loop If "${olt_sn}"!="${src['olt']}"
Hardik Windlass16cdf962020-04-29 15:26:50 +0530985 ${onu_device_id}= Get Device ID From SN ${src['onu']}
Hardik Windlass41701e82021-01-12 17:44:44 +0000986 ${of_id}= Wait Until Keyword Succeeds ${timeout} 15s Validate OLT Device in ONOS ${src['olt']}
Hardik Windlass16cdf962020-04-29 15:26:50 +0530987 ${onu_port}= Wait Until Keyword Succeeds ${timeout} 2s Get ONU Port in ONOS ${src['onu']}
Emrehan UZUNabef5182021-11-26 10:54:24 +0000988 ... ${of_id} ${src['uni_id']}
Hardik Windlass16cdf962020-04-29 15:26:50 +0530989 ${matched}= Match ONU in PON OLT Peer List ${olt_peer_list} ${onu_device_id}
Girish Gowdra3f0fadb2021-11-08 16:49:28 -0800990 ${valid_onu_states}= Create List stopping-openomci omci-flows-deleted
Hardik Windlass16cdf962020-04-29 15:26:50 +0530991 Run Keyword If ${matched}
992 ... Run Keywords
993 ... Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
994 ... Validate Device ENABLED DISCOVERED
Girish Gowdra3f0fadb2021-11-08 16:49:28 -0800995 ... UNREACHABLE ${src['onu']} onu=True onu_reason=${valid_onu_states}
Hardik Windlass5d537ad2021-11-16 06:01:54 +0000996 ... AND Wait Until Keyword Succeeds ${timeout} 2s
Emrehan UZUNabef5182021-11-26 10:54:24 +0000997 ... Verify UNI Port Is Disabled ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${src['onu']} ${src['uni_id']}
Hardik Windlass16cdf962020-04-29 15:26:50 +0530998 ... AND Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure
Hardik Windlass5d537ad2021-11-16 06:01:54 +0000999 ... Wait Until Keyword Succeeds ${timeout} 2s
Hardik Windlass16cdf962020-04-29 15:26:50 +05301000 ... Check Ping False ${dst['dp_iface_ip_qinq']} ${src['dp_iface_name']}
1001 ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']}
1002 ... ${src['container_name']}
1003 # Remove Subscriber Access (To replicate DT workflow)
TorstenThieme4e2168e2021-06-22 14:01:47 +00001004 ... AND Wait Until Keyword Succeeds ${timeout} 2s Execute ONOS CLI Command use single connection
1005 ... ${ONOS_SSH_IP} ${ONOS_SSH_PORT} volt-remove-subscriber-access ${of_id} ${onu_port}
Hardik Windlass16cdf962020-04-29 15:26:50 +05301006 # Delete ONU Device (To replicate DT workflow)
1007 ... AND Delete Device ${onu_device_id}
Hardik Windlass223a1732021-07-09 05:21:40 +00001008 # Additional Sleep to let subscriber and ONU delete process
1009 ... AND Sleep 10s
Hardik Windlass16cdf962020-04-29 15:26:50 +05301010 ... ELSE
1011 ... Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure
Hardik Windlass5d537ad2021-11-16 06:01:54 +00001012 ... Wait Until Keyword Succeeds ${timeout} 2s
Hardik Windlass16cdf962020-04-29 15:26:50 +05301013 ... Check Ping True ${dst['dp_iface_ip_qinq']} ${src['dp_iface_name']}
1014 ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']}
1015 ... ${src['container_name']}
Hardik Windlass16cdf962020-04-29 15:26:50 +05301016 END
1017
1018Validate ONUs for PON OLT Enable DT
Hardik Windlass41701e82021-01-12 17:44:44 +00001019 [Arguments] ${olt_sn} ${olt_peer_list}
Hardik Windlass16cdf962020-04-29 15:26:50 +05301020 [Documentation] This keyword validates Ping succeeds for all Enabled/Acitve OLT PON ports
1021 ... Also performs subscriberAdd/DHCP/Ping for the ONUs on Re-Enabled OLT PON port
Suchitra Vemuria6879aa2020-11-03 11:03:11 -08001022 FOR ${I} IN RANGE 0 ${num_all_onus}
Hardik Windlass16cdf962020-04-29 15:26:50 +05301023 ${src}= Set Variable ${hosts.src[${I}]}
1024 ${dst}= Set Variable ${hosts.dst[${I}]}
Hardik Windlass41701e82021-01-12 17:44:44 +00001025 Continue For Loop If "${olt_sn}"!="${src['olt']}"
Hardik Windlass16cdf962020-04-29 15:26:50 +05301026 ${onu_device_id}= Get Device ID From SN ${src['onu']}
Hardik Windlass41701e82021-01-12 17:44:44 +00001027 ${of_id}= Wait Until Keyword Succeeds ${timeout} 15s Validate OLT Device in ONOS ${src['olt']}
TorstenThiemedda37652021-11-11 16:22:05 +00001028 ${nni_port}= Wait Until Keyword Succeeds ${timeout} 2s Get NNI Port in ONOS ${of_id}
Hardik Windlass16cdf962020-04-29 15:26:50 +05301029 ${onu_port}= Wait Until Keyword Succeeds ${timeout} 2s Get ONU Port in ONOS ${src['onu']}
Emrehan UZUNabef5182021-11-26 10:54:24 +00001030 ... ${of_id} ${src['uni_id']}
Hardik Windlass16cdf962020-04-29 15:26:50 +05301031 ${matched}= Match ONU in PON OLT Peer List ${olt_peer_list} ${onu_device_id}
1032 Run Keyword If ${matched}
1033 ... Run Keywords
1034 # Perform Cleanup
1035 ... Run Keyword If ${has_dataplane} Clean Up Linux ${onu_device_id}
1036 # Verify ONU port status
Hardik Windlass5d537ad2021-11-16 06:01:54 +00001037 ... AND Wait Until Keyword Succeeds 120s 2s
Emrehan UZUNabef5182021-11-26 10:54:24 +00001038 ... Verify UNI Port Is Enabled ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${src['onu']} ${src['uni_id']}
Hardik Windlass5d537ad2021-11-16 06:01:54 +00001039 ... AND Wait Until Keyword Succeeds ${timeout} 2
TorstenThieme4e2168e2021-06-22 14:01:47 +00001040 ... Execute ONOS CLI Command use single connection ${ONOS_SSH_IP} ${ONOS_SSH_PORT}
Hardik Windlass16cdf962020-04-29 15:26:50 +05301041 ... volt-add-subscriber-access ${of_id} ${onu_port}
1042 # Verify ONU state in voltha
1043 ... AND Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
1044 ... Validate Device ENABLED ACTIVE REACHABLE
1045 ... ${src['onu']} onu=True onu_reason=omci-flows-pushed
1046 # Verify subscriber access flows are added for the ONU port
Hardik Windlass5d537ad2021-11-16 06:01:54 +00001047 ... AND Wait Until Keyword Succeeds ${timeout} 5s
Hardik Windlass16cdf962020-04-29 15:26:50 +05301048 ... Verify Subscriber Access Flows Added For ONU DT ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${of_id}
1049 ... ${onu_port} ${nni_port} ${src['s_tag']}
1050 ... AND Run Keyword If ${has_dataplane}
1051 ... Run Keyword And Continue On Failure Validate DHCP and Ping True
1052 ... True ${src['dp_iface_name']} ${src['s_tag']} ${src['c_tag']} ${dst['dp_iface_ip_qinq']}
1053 ... ${src['ip']} ${src['user']} ${src['pass']}
1054 ... ${src['container_type']} ${src['container_name']}
1055 ... ${dst['dp_iface_name']} ${dst['ip']} ${dst['user']} ${dst['pass']}
1056 ... ${dst['container_type']} ${dst['container_name']}
1057 ... ELSE
1058 ... Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure
Hardik Windlass5d537ad2021-11-16 06:01:54 +00001059 ... Wait Until Keyword Succeeds ${timeout} 2s
Hardik Windlass16cdf962020-04-29 15:26:50 +05301060 ... Check Ping True ${dst['dp_iface_ip_qinq']} ${src['dp_iface_name']}
1061 ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']}
1062 ... ${src['container_name']}
Hardik Windlass16cdf962020-04-29 15:26:50 +05301063 END
1064
1065Match ONU in PON OLT Peer List
1066 [Arguments] ${olt_peer_list} ${onu_device_id}
1067 [Documentation] This keyword matches if ONU device is present in OLT PON port peer list
1068 ${matched}= Set Variable False
1069 FOR ${olt_peer} IN @{olt_peer_list}
1070 ${matched}= Set Variable If '${onu_device_id}' == '${olt_peer}' True False
1071 Exit For Loop If ${matched}
1072 END
1073 [Return] ${matched}
1074
Gayathri.Selvanb6a2b542020-01-24 07:24:23 +00001075Collect Logs
1076 [Documentation] Collect Logs from voltha and onos cli for various commands
1077 Run Keyword and Ignore Error Get Device List from Voltha
Suchitra Vemuria6879aa2020-11-03 11:03:11 -08001078 FOR ${I} IN RANGE 0 ${num_olts}
Suchitra Vemuria6879aa2020-11-03 11:03:11 -08001079 Run Keyword and Ignore Error Get Device Output from Voltha ${olt_ids}[${I}][device_id]
1080 Run Keyword and Ignore Error Get Logical Device Output from Voltha ${olt_ids}[${I}][logical_id]
1081 END
1082 #Run Keyword and Ignore Error Get Device Output from Voltha ${olt_device_id}
1083 #Run Keyword and Ignore Error Get Logical Device Output from Voltha ${logical_id}
ubuntu6b6e7d42020-03-02 12:35:42 -08001084 Get ONOS Status ${ONOS_SSH_IP} ${ONOS_SSH_PORT}
Gayathri.Selvanf68ea4b2020-02-03 07:36:39 +00001085
Hardik Windlassb75cf1b2021-01-18 06:59:09 +00001086Verify ping is successful except for given device
1087 [Arguments] ${num_onus} ${exceptional_onu}
Gayathri.Selvanf68ea4b2020-02-03 07:36:39 +00001088 [Documentation] Checks that ping for all the devices are successful except the given ONU.
1089 ${pingStatus} Set Variable True
Suchitra Vemuria6879aa2020-11-03 11:03:11 -08001090 FOR ${I} IN RANGE 0 ${num_all_onus}
Gayathri.Selvanf68ea4b2020-02-03 07:36:39 +00001091 ${src}= Set Variable ${hosts.src[${I}]}
1092 ${dst}= Set Variable ${hosts.dst[${I}]}
Hardik Windlassb75cf1b2021-01-18 06:59:09 +00001093 ${pingStatus} Run Keyword If '${src['onu']}' == '${exceptional_onu}' Set Variable False
Suchitra Vemuri69bcad22020-12-09 11:11:14 -08001094 Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure
1095 ... Wait Until Keyword Succeeds 60s 2s
Gayathri.Selvanf68ea4b2020-02-03 07:36:39 +00001096 ... Check Ping ${pingStatus} ${dst['dp_iface_ip_qinq']} ${src['dp_iface_name']}
1097 ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
1098 END
Andy Bavier4a8450e2020-02-04 08:58:37 -07001099
Suchitra Vemurife309412020-12-01 19:19:52 -08001100Verify ping is successful for ONUs not on this OLT
1101 [Arguments] ${num_all_onus} ${exceptional_olt_id}
1102 [Documentation] Checks that pings work for all the ONUs except for the ONUs on the given OLT.
1103 #${pingStatus} Set Variable True
1104 FOR ${I} IN RANGE 0 ${num_all_onus}
1105 ${src}= Set Variable ${hosts.src[${I}]}
1106 ${dst}= Set Variable ${hosts.dst[${I}]}
1107 ${olt_device_id}= Get Device ID From SN ${src['olt']}
1108 Continue For Loop If "${olt_device_id}"=="${exceptional_olt_id}"
1109 #${pingStatus} Run Keyword If '${olt_device_id}' == '${exceptional_olt_id}' Set Variable False
Suchitra Vemuri69bcad22020-12-09 11:11:14 -08001110 Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure
1111 ... Wait Until Keyword Succeeds 60s 2s
Suchitra Vemurife309412020-12-01 19:19:52 -08001112 ... Check Ping True ${dst['dp_iface_ip_qinq']} ${src['dp_iface_name']}
1113 ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
1114 END
1115
Andy Bavier1923ecc2020-06-18 14:06:40 -07001116Echo Message to OLT Logs
1117 [Arguments] ${message}
1118 [Documentation] Echoes ${message} into the OLT logs
Suchitra Vemuria6879aa2020-11-03 11:03:11 -08001119 FOR ${I} IN RANGE 0 ${num_olts}
1120 ${olt_user} Evaluate ${olts}[${I}].get("user")
1121 ${olt_pass} Evaluate ${olts}[${I}].get("pass")
1122 ${olt_ssh_ip} Evaluate ${olts}[${I}].get("sship")
Andrea Campanellaebf6f0d2021-01-12 13:10:29 +01001123 Continue For Loop If "${olt_user}" == "${None}"
1124 Continue For Loop If "${olt_pass}" == "${None}"
Suchitra Vemuria6879aa2020-11-03 11:03:11 -08001125 Wait Until Keyword Succeeds 180s 10s Execute Remote Command
1126 ... printf '%s\n' '' '' '${message}' '' >> /var/log/openolt.log
1127 ... ${olt_ssh_ip} ${olt_user} ${olt_pass}
1128 Wait Until Keyword Succeeds 180s 10s Execute Remote Command
1129 ... printf '%s\n' '' '' '${message}' '' >> /var/log/dev_mgmt_daemon.log
1130 ... ${olt_ssh_ip} ${olt_user} ${olt_pass}
1131 Wait Until Keyword Succeeds 180s 10s Execute Remote Command
1132 ... printf '%s\n' '' '' '${message}' '' >> /var/log/openolt_process_watchdog.log
1133 ... ${olt_ssh_ip} ${olt_user} ${olt_pass}
1134 END
Andy Bavier1923ecc2020-06-18 14:06:40 -07001135
Andy Bavierabeba262020-02-07 16:22:16 -07001136Start Logging
1137 [Arguments] ${label}
1138 [Documentation] Start logging for test ${label}
Hardik Windlass9e3db232021-10-14 07:10:47 +00001139 ${kail_process}= Run Keyword If "${container_log_dir}" != "${None}" Start Process kail -n ${NAMESPACE}
Hardik Windlassa9a896a2021-11-23 04:31:51 +00001140 ... -n ${INFRA_NAMESPACE} cwd=${container_log_dir} stdout=${label}-combined.log
Andy Bavierabeba262020-02-07 16:22:16 -07001141 Set Test Variable ${kail_process}
Andy Bavier1923ecc2020-06-18 14:06:40 -07001142 Run Keyword If ${has_dataplane} Echo Message to OLT Logs START ${label}
Andy Bavierabeba262020-02-07 16:22:16 -07001143
Andrea Campanella82add372021-11-05 12:01:15 +01001144Start Logging Setup or Teardown
1145 [Arguments] ${label}
1146 [Documentation] Start logging for suite ${label}
Matteo Scandolo6a90bda2021-11-30 11:31:38 -08001147 ${file}= Replace String ${label} ${SPACE} -
Andrea Campanella82add372021-11-05 12:01:15 +01001148 ${kail_process}= Run Keyword If "${container_log_dir}" != "${None}" Start Process kail -n ${NAMESPACE}
Matteo Scandolo6a90bda2021-11-30 11:31:38 -08001149 ... -n ${INFRA_NAMESPACE} cwd=${container_log_dir} stdout=${file}-combined.log
Andrea Campanella82add372021-11-05 12:01:15 +01001150 Set Suite Variable ${kail_process}
1151 Run Keyword If ${has_dataplane} Echo Message to OLT Logs START ${label}
1152
1153Stop Logging Setup or Teardown
1154 [Arguments] ${label}
1155 [Documentation] End logging for suite;
1156 Run sync
1157 Run Keyword If ${kail_process} Terminate Process ${kail_process}
1158 ${test_logfile}= Run Keyword If "${container_log_dir}" != "${None}"
1159 ... Join Path ${container_log_dir} ${label}-combined.log
1160 Run Keyword If ${has_dataplane} Echo Message to OLT Logs END ${label}
1161
Andy Bavierabeba262020-02-07 16:22:16 -07001162Stop Logging
1163 [Arguments] ${label}
Matteo Scandoloda1c64b2021-07-20 10:14:49 -07001164 [Documentation] End logging for test; remove logfile if test passed and ${logging} is set to False
Andy Bavierabeba262020-02-07 16:22:16 -07001165 Run sync
1166 Run Keyword If ${kail_process} Terminate Process ${kail_process}
1167 ${test_logfile}= Run Keyword If "${container_log_dir}" != "${None}"
1168 ... Join Path ${container_log_dir} ${label}-combined.log
Matteo Scandoloda1c64b2021-07-20 10:14:49 -07001169 Run Keyword If Test Passed
1170 ... Run Keyword If "${logging}" == "False"
1171 ... Run Keyword If "${test_logfile}" != "${None}"
1172 ... Remove File ${test_logfile}
Andy Bavier1923ecc2020-06-18 14:06:40 -07001173 Run Keyword If ${has_dataplane} Echo Message to OLT Logs END ${label}
Andy Bavierabeba262020-02-07 16:22:16 -07001174
Suchitra Vemuria5fa3dd2020-02-04 14:38:49 -08001175Clean Up Linux
1176 [Documentation] Kill processes and clean up interfaces on src+dst servers
Hardik Windlass16cdf962020-04-29 15:26:50 +05301177 [Arguments] ${onu_id}=${EMPTY}
Suchitra Vemuria6879aa2020-11-03 11:03:11 -08001178 FOR ${I} IN RANGE 0 ${num_all_onus}
Suchitra Vemuria5fa3dd2020-02-04 14:38:49 -08001179 ${src}= Set Variable ${hosts.src[${I}]}
1180 ${dst}= Set Variable ${hosts.dst[${I}]}
Hardik Windlass16cdf962020-04-29 15:26:50 +05301181 ${onu_device_id}= Get Device ID From SN ${src['onu']}
1182 Continue For Loop If '${onu_id}' != '${EMPTY}' and '${onu_id}' != '${onu_device_id}'
Andy Bavier84b83282020-06-30 05:47:49 -07001183 Execute Remote Command sudo pkill wpa_supplicant ${src['ip']}
Suchitra Vemuria5fa3dd2020-02-04 14:38:49 -08001184 ... ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
Andy Bavier84b83282020-06-30 05:47:49 -07001185 Execute Remote Command sudo pkill dhclient ${src['ip']}
Suchitra Vemuria5fa3dd2020-02-04 14:38:49 -08001186 ... ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
Andy Baviereff938d2020-06-29 18:27:49 -07001187 Execute Remote Command sudo pkill mausezahn ${src['ip']}
1188 ... ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
1189 Run Keyword If '${dst['ip']}' != '${None}' Execute Remote Command pkill dhcpd
1190 ... ${dst['ip']} ${dst['user']} ${dst['pass']} ${dst['container_type']} ${dst['container_name']}
Suchitra Vemuria5fa3dd2020-02-04 14:38:49 -08001191 Delete IP Addresses from Interface on Remote Host ${src['dp_iface_name']} ${src['ip']}
1192 ... ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
1193 Run Keyword If '${dst['ip']}' != '${None}' Delete Interface on Remote Host
1194 ... ${dst['dp_iface_name']}.${src['s_tag']} ${dst['ip']} ${dst['user']} ${dst['pass']}
1195 ... ${dst['container_type']} ${dst['container_name']}
Andy Bavier84b83282020-06-30 05:47:49 -07001196 ${bng_ip}= Get Variable Value ${dst['noroot_ip']}
1197 ${bng_user}= Get Variable Value ${dst['noroot_user']}
1198 ${bng_pass}= Get Variable Value ${dst['noroot_pass']}
Andy Bavierf4b7d1d2020-06-30 11:14:04 -07001199 Run Keyword If "${bng_ip}" != "${NONE}" and "${bng_user}" != "${NONE}" and "${bng_pass}" != "${NONE}"
1200 ... Execute Remote Command sudo pkill mausezahn ${bng_ip} ${bng_user} ${bng_pass}
Andy Baviereff938d2020-06-29 18:27:49 -07001201 ... ${dst['container_type']} ${dst['container_name']}
Suchitra Vemuria5fa3dd2020-02-04 14:38:49 -08001202 END
Scott Baker60e570d2020-02-02 22:10:13 -08001203
Suchitra Vemuria6879aa2020-11-03 11:03:11 -08001204Clean Up Linux Per OLT
1205 [Documentation] Kill processes and clean up interfaces on src+dst servers
1206 [Arguments] ${olt_serial_number}
1207 FOR ${I} IN RANGE 0 ${num_all_onus}
1208 ${src}= Set Variable ${hosts.src[${I}]}
1209 ${dst}= Set Variable ${hosts.dst[${I}]}
1210 ${onu_device_id}= Get Device ID From SN ${src['onu']}
1211 ${sn}= Get Device ID From SN ${src['olt']}
1212 #Continue For Loop If '${onu_id}' != '${EMPTY}' and '${onu_id}' != '${onu_device_id}'
1213 Continue For Loop If '${olt_serial_number}' == '${sn}'
1214 Execute Remote Command sudo pkill wpa_supplicant ${src['ip']}
1215 ... ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
1216 Execute Remote Command sudo pkill dhclient ${src['ip']}
1217 ... ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
1218 Execute Remote Command sudo pkill mausezahn ${src['ip']}
1219 ... ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
1220 Run Keyword If '${dst['ip']}' != '${None}' Execute Remote Command pkill dhcpd
1221 ... ${dst['ip']} ${dst['user']} ${dst['pass']} ${dst['container_type']} ${dst['container_name']}
1222 Delete IP Addresses from Interface on Remote Host ${src['dp_iface_name']} ${src['ip']}
1223 ... ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
1224 Run Keyword If '${dst['ip']}' != '${None}' Delete Interface on Remote Host
1225 ... ${dst['dp_iface_name']}.${src['s_tag']} ${dst['ip']} ${dst['user']} ${dst['pass']}
1226 ... ${dst['container_type']} ${dst['container_name']}
1227 ${bng_ip}= Get Variable Value ${dst['noroot_ip']}
1228 ${bng_user}= Get Variable Value ${dst['noroot_user']}
1229 ${bng_pass}= Get Variable Value ${dst['noroot_pass']}
1230 Run Keyword If "${bng_ip}" != "${NONE}" and "${bng_user}" != "${NONE}" and "${bng_pass}" != "${NONE}"
1231 ... Execute Remote Command sudo pkill mausezahn ${bng_ip} ${bng_user} ${bng_pass}
1232 ... ${dst['container_type']} ${dst['container_name']}
1233 END
1234
Suchitra Vemuri8d3b0032020-09-11 17:49:08 -07001235Clean dhclient
1236 [Documentation] Kills dhclient processes only for all RGs
Hardik Windlass41701e82021-01-12 17:44:44 +00001237 FOR ${I} IN RANGE 0 ${num_all_onus}
Suchitra Vemuri8d3b0032020-09-11 17:49:08 -07001238 ${src}= Set Variable ${hosts.src[${I}]}
1239 ${dst}= Set Variable ${hosts.dst[${I}]}
1240 Execute Remote Command sudo pkill dhclient ${src['ip']}
1241 ... ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
1242 END
1243
Suchitra Vemurif7a033c2020-02-26 17:22:41 -08001244Clean WPA Process
1245 [Documentation] Kills wpa_supplicant processes only for all RGs
Suchitra Vemuria6879aa2020-11-03 11:03:11 -08001246 FOR ${I} IN RANGE 0 ${num_all_onus}
Suchitra Vemurif7a033c2020-02-26 17:22:41 -08001247 ${src}= Set Variable ${hosts.src[${I}]}
1248 ${dst}= Set Variable ${hosts.dst[${I}]}
1249 Run Keyword And Ignore Error Kill Linux Process [w]pa_supplicant ${src['ip']}
1250 ... ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
1251 END
1252
Scott Baker60e570d2020-02-02 22:10:13 -08001253Should Be Larger Than
1254 [Documentation] Verify that value_1 is > value_2
1255 [Arguments] ${value_1} ${value_2}
1256 Run Keyword If ${value_1} <= ${value_2}
1257 ... Fail The value ${value_1} is not larger than ${value_2}
1258
Scott Bakeree675552020-02-11 10:43:34 -08001259Should Be Larger Than Or Equal To
1260 [Documentation] Verify that value_1 is >= value_2
1261 [Arguments] ${value_1} ${value_2}
1262 Run Keyword If ${value_1} < ${value_2}
1263 ... Fail The value ${value_1} is not larger than or equal to ${value_2}
1264
Huseyin Ahmet AYDIN175d1582021-11-23 14:51:41 +00001265Should Be Lower Than
1266 [Documentation] Verify that value_1 is < value_2
1267 [Arguments] ${value_1} ${value_2}
1268 Run Keyword If ${value_1} >= ${value_2}
1269 ... Fail The value ${value_1} is not lower than ${value_2}
1270
Scott Baker60e570d2020-02-02 22:10:13 -08001271Should Be Float
1272 [Documentation] Verify that value is a floating point number type
1273 [Arguments] ${value}
1274 ${type} Evaluate type(${value}).__name__
1275 Should Be Equal ${type} float
1276
Scott Bakeree675552020-02-11 10:43:34 -08001277Should Be Newer Than Or Equal To
1278 [Documentation] Compare two RFC3339 dates
1279 [Arguments] ${value_1} ${value_2}
1280 ${unix_v1} Parse RFC3339 ${value_1}
1281 ${unix_v2} Parse RFC3339 ${value_2}
1282 Run Keyword If ${unix_v1} < ${unix_v2}
1283 ... Fail The value ${value_1} is not newer than or equal to ${value_2}
1284
Scott Baker60e570d2020-02-02 22:10:13 -08001285Get Current Time
1286 [Documentation] Return the current time in RFC3339 format
1287 ${output}= Run date -u +"%FT%T%:z"
1288 [return] ${output}
Scott Bakeree675552020-02-11 10:43:34 -08001289
1290Parse RFC3339
1291 [Documentation] Parse an RFC3339 timestamp
1292 [Arguments] ${dateStr}
1293 ${rc} ${output}= Run and Return Rc and Output date --date="${dateStr}" "+%s"
1294 Should Be Equal As Numbers ${rc} 0
1295 [return] ${output}
Matteo Scandolo142e6272020-04-29 17:36:59 -07001296
Gayathri.Selvan92d16862020-03-19 14:47:58 +00001297Get Bandwidth Profile Name For Given Subscriber
Hardik Windlass35db2aa2021-06-03 12:41:26 +00001298 [Arguments] ${subscriber_id} ${stream_type}=upstreamBandwidthProfile ${service_type}=${EMPTY}
Gayathri.Selvan92d16862020-03-19 14:47:58 +00001299 [Documentation] Keyword to get the bandwidth details of the given subscriber
Hardik Windlass35db2aa2021-06-03 12:41:26 +00001300 ${service_type_upper}= Run Keyword If '${service_type}' != '${EMPTY}'
1301 ... Convert To Upper Case ${service_type}
1302 ${bandwidth_profile_output}= Run Keyword If '${service_type}' != '${EMPTY}'
TorstenThieme4e2168e2021-06-22 14:01:47 +00001303 ... Execute ONOS CLI Command use single connection ${ONOS_SSH_IP} ${ONOS_SSH_PORT}
Hardik Windlass1189a642021-06-04 03:25:23 +00001304 ... volt-programmed-subscribers | grep ${subscriber_id} | grep '${service_type_upper}' --color=never
Hardik Windlass35db2aa2021-06-03 12:41:26 +00001305 ... ELSE
TorstenThieme4e2168e2021-06-22 14:01:47 +00001306 ... Execute ONOS CLI Command use single connection ${ONOS_SSH_IP} ${ONOS_SSH_PORT}
Gayathri.Selvan92d16862020-03-19 14:47:58 +00001307 ... volt-programmed-subscribers | grep ${subscriber_id}
1308 @{bandwidth_profile_array}= Split String ${bandwidth_profile_output} ,
1309 Log ${bandwidth_profile_array}
1310 FOR ${value} IN @{bandwidth_profile_array}
1311 @{row_value}= Split String ${value} =
1312 ${bandwidth_profile_name}= Set Variable If '${row_value[0]}' == ' ${stream_type}'
1313 ... ${row_value[1]}
1314 ${bandwidth_profile_name}= Convert To String ${bandwidth_profile_name}
1315 Run Keyword If "${bandwidth_profile_name}" != "None" Exit For Loop
1316 END
1317 Log ${bandwidth_profile_name}
1318 [Return] ${bandwidth_profile_name}
1319
1320Execute Remote Command
1321 [Documentation] SSH into a remote host and execute a command on the bare host or in a container.
1322 ... This replaces and simplifies the Login And Run Command On Remote System keyword in CORDRobot.
1323 [Arguments] ${cmd} ${ip} ${user} ${pass}=${None}
Andy Baviereff938d2020-06-29 18:27:49 -07001324 ... ${container_type}=${None} ${container_name}=${None} ${timeout}=${None}
Gayathri.Selvan92d16862020-03-19 14:47:58 +00001325 ${conn_id}= SSHLibrary.Open Connection ${ip}
1326 Run Keyword If '${pass}' != '${None}'
1327 ... SSHLibrary.Login ${user} ${pass}
1328 ... ELSE
1329 ... SSHLibrary.Login With Public Key ${user} %{HOME}/.ssh/id_rsa
1330 ${namespace}= Run Keyword If '${container_type}' == 'K8S' SSHLibrary.Execute Command
1331 ... kubectl get pods --all-namespaces | grep ${container_name} | awk '{print $1}'
Andy Bavierf6ab19c2020-05-14 10:34:47 -07001332 ${stdout} ${stderr} ${rc}= Run Keyword If '${container_type}' == 'LXC'
1333 ... SSHLibrary.Execute Command lxc exec ${container_name} -- ${cmd}
Andy Baviereff938d2020-06-29 18:27:49 -07001334 ... return_stderr=True return_rc=True timeout=${timeout}
Gayathri.Selvan92d16862020-03-19 14:47:58 +00001335 ... ELSE IF '${container_type}' == 'K8S'
Andy Bavierf6ab19c2020-05-14 10:34:47 -07001336 ... SSHLibrary.Execute Command kubectl -n ${namespace} exec ${container_name} -- ${cmd}
Andy Baviereff938d2020-06-29 18:27:49 -07001337 ... return_stderr=True return_rc=True timeout=${timeout}
Gayathri.Selvan92d16862020-03-19 14:47:58 +00001338 ... ELSE
Andy Baviereff938d2020-06-29 18:27:49 -07001339 ... SSHLibrary.Execute Command ${cmd} return_stderr=True return_rc=True timeout=${timeout}
Andy Bavierf6ab19c2020-05-14 10:34:47 -07001340
1341 Log ${stdout}
1342 Log ${stderr}
1343 Log ${rc}
Gayathri.Selvan92d16862020-03-19 14:47:58 +00001344 SSHLibrary.Close Connection
Andy Bavierf6ab19c2020-05-14 10:34:47 -07001345 [Return] ${stdout} ${stderr} ${rc}
Gayathri.Selvan92d16862020-03-19 14:47:58 +00001346
Suraj Gour33651272020-05-04 10:10:16 +05301347Start Remote Command
1348 [Documentation] SSH into a remote host and execute a command on the bare host or in a container.
1349 ... This replaces and simplifies the Login And Run Command On Remote System keyword in CORDRobot.
1350 [Arguments] ${cmd} ${ip} ${user} ${pass}=${None}
1351 ... ${container_type}=${None} ${container_name}=${None}
1352 ${conn_id}= SSHLibrary.Open Connection ${ip}
1353 Run Keyword If '${pass}' != '${None}'
1354 ... SSHLibrary.Login ${user} ${pass}
1355 ... ELSE
1356 ... SSHLibrary.Login With Public Key ${user} %{HOME}/.ssh/id_rsa
1357 ${namespace}= Run Keyword If '${container_type}' == 'K8S' SSHLibrary.Execute Command
1358 ... kubectl get pods --all-namespaces | grep ${container_name} | awk '{print $1}'
1359 Run Keyword If '${container_type}' == 'LXC'
1360 ... SSHLibrary.Start Command lxc exec ${container_name} -- ${cmd}
1361 ... ELSE IF '${container_type}' == 'K8S'
1362 ... SSHLibrary.Start Command kubectl -n ${namespace} exec ${container_name} -- ${cmd}
1363 ... ELSE
1364 ... SSHLibrary.Start Command ${cmd}
Andy Bavier9fb23232020-06-30 15:12:20 -07001365 # It seems that closing the connection immediately will sometimes kill the command
1366 Sleep 1s
Suraj Gour33651272020-05-04 10:10:16 +05301367 SSHLibrary.Close Connection
1368
Gayathri.Selvan92d16862020-03-19 14:47:58 +00001369Run Iperf3 Test Client
1370 [Arguments] ${src} ${server} ${args}
1371 [Documentation] Login to ${src} and run the iperf3 client against ${server} using ${args}.
1372 ... Return a Dictionary containing the results of the test.
Girish Gowdrad769b412021-05-16 11:09:46 -07001373 ${output} ${stderr} ${rc}= Execute Remote Command iperf3 -J -c ${server} ${args} -l 1024 -M 1350 | jq -M -c '.'
Gayathri.Selvan92d16862020-03-19 14:47:58 +00001374 ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
Andy Bavierf6ab19c2020-05-14 10:34:47 -07001375 Should Be Equal As Integers ${rc} 0
Gayathri.Selvan92d16862020-03-19 14:47:58 +00001376 ${object}= Evaluate json.loads(r'''${output}''') json
1377 [Return] ${object}
Hung-Wei Chiue0bec7c2020-05-29 22:16:56 +00001378
Suchitra Vemuri85cb7d62020-07-16 23:46:16 -07001379Run Iperf Test Client for MCAST
1380 [Arguments] ${src} ${server} ${args}
1381 [Documentation] Login to ${src} and run the iperf client against ${server} using ${args}.
1382 ... Return a Dictionary containing the results of the test.
1383 ${output} ${stderr} ${rc}= Execute Remote Command sudo iperf -c ${server} ${args} | jq -M -c '.'
1384 ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
1385 Should Be Equal As Integers ${rc} 0
1386 ${object}= Evaluate json.loads(r'''${output}''') json
1387 [Return] ${object}
1388
Hardik Windlassd19af862021-08-12 11:40:20 +00001389Run Ping In Background
1390 [Arguments] ${output_file} ${dst_ip} ${iface} ${ip} ${user} ${pass}=${None}
1391 ... ${container_type}=${None} ${container_name}=${None}
1392 [Documentation] Runs the 'ping' on remote system in background and stores the result in a file
1393 ${result}= Login And Run Command On Remote System
Hardik Windlass4e0e7c12021-08-26 08:07:35 +00001394 ... echo "ping -I ${iface} ${dst_ip} > ${output_file} &" > ping.sh; chmod +x ping.sh; ./ping.sh
Hardik Windlassd19af862021-08-12 11:40:20 +00001395 ... ${ip} ${user} ${pass} ${container_type} ${container_name}
1396 Log ${result}
1397
1398Stop Ping Running In Background
1399 [Arguments] ${ip} ${user} ${pass}=${None}
1400 ... ${container_type}=${None} ${container_name}=${None}
1401 [Documentation] Stops the 'ping' running in background on remote system
Hardik Windlassa04efa52021-08-13 08:17:24 +00001402 ${cmd}= Run Keyword If '${container_type}' == 'LXC' or '${container_type}' == 'K8S'
1403 ... Set Variable kill -SIGINT `pgrep ping`
1404 ... ELSE
1405 ... Set Variable sudo kill -SIGINT `pgrep ping`
Hardik Windlassd19af862021-08-12 11:40:20 +00001406 ${result}= Login And Run Command On Remote System
Hardik Windlassa04efa52021-08-13 08:17:24 +00001407 ... ${cmd} ${ip} ${user} ${pass} ${container_type} ${container_name}
Hardik Windlassd19af862021-08-12 11:40:20 +00001408 Log ${result}
1409
1410Retrieve Remote File Contents
1411 [Documentation] Retrieves the contents of the file on remote system
1412 [Arguments] ${file} ${ip} ${user} ${pass}=${None}
1413 ... ${container_type}=${None} ${container_name}=${None} ${prompt}=~$
1414 ${output}= Login And Run Command On Remote System
1415 ... cat ${file}
1416 ... ${ip} ${user} ${pass} ${container_type} ${container_name} ${prompt}
1417 [Return] ${output}
1418
Hung-Wei Chiue0bec7c2020-05-29 22:16:56 +00001419RestoreONUs
1420 [Documentation] Restore all connected ONUs
Suchitra Vemuria6879aa2020-11-03 11:03:11 -08001421 [Arguments] ${num_all_onus}
1422 FOR ${I} IN RANGE 0 ${num_all_onus}
Hung-Wei Chiue0bec7c2020-05-29 22:16:56 +00001423 ${src}= Set Variable ${hosts.src[${I}]}
Hung-Wei Chiucc6e6552020-06-04 12:57:38 -07001424 ${container_type}= Get Variable Value ${src['container_type']} "null"
1425 ${container_name}= Get Variable Value ${src['container_name']} "null"
Hung-Wei Chiue0bec7c2020-05-29 22:16:56 +00001426 ${onu_type}= Get Variable Value ${src['onu_type']} "null"
Hung-Wei Chiucc6e6552020-06-04 12:57:38 -07001427 #Get ens6f0 from ens6f0.22
1428 ${if_name}= Replace String Using Regexp ${src['dp_iface_name']} \\..* \
Hung-Wei Chiue0bec7c2020-05-29 22:16:56 +00001429 Run Keyword IF '${onu_type}' == 'alpha' AlphaONURestoreDefault ${src['ip']} ${src['user']}
Hung-Wei Chiucc6e6552020-06-04 12:57:38 -07001430 ... ${src['pass']} ${if_name} admin admin ${container_type} ${container_name}
Hung-Wei Chiue0bec7c2020-05-29 22:16:56 +00001431 END
1432
1433AlphaONURestoreDefault
1434 [Documentation] Restore the Alpha ONU to factory setting
1435 [Arguments] ${rg_ip} ${rg_user} ${rg_pass} ${onu_ifname}
Hung-Wei Chiucc6e6552020-06-04 12:57:38 -07001436 ... ${onu_user} ${onu_pass} ${container_type}=${None} ${container_name}=${None}
Hung-Wei Chiue0bec7c2020-05-29 22:16:56 +00001437 ${output}= Login And Run Command On Remote System sudo ifconfig ${onu_ifname} 192.168.1.3/24
Hung-Wei Chiucc6e6552020-06-04 12:57:38 -07001438 ... ${rg_ip} ${rg_user} ${rg_pass} ${container_type} ${container_name}
TorstenThieme70bc5262021-01-19 12:12:55 +00001439 ${cmd} Catenate
Hung-Wei Chiue0bec7c2020-05-29 22:16:56 +00001440 ... (echo open "192.168.1.1"; sleep 1;
1441 ... echo "${onu_user}"; sleep 1;
1442 ... echo "${onu_pass}"; sleep 1;
1443 ... echo "restoredefault"; sleep 1) | telnet
1444 ${output}= Login And Run Command On Remote System ${cmd}
Hung-Wei Chiucc6e6552020-06-04 12:57:38 -07001445 ... ${rg_ip} ${rg_user} ${rg_pass} ${container_type} ${container_name}
Hung-Wei Chiue0bec7c2020-05-29 22:16:56 +00001446 Log To Console ${output}
1447 ${output}= Login And Run Command On Remote System sudo ifconfig ${onu_ifname} 0
Hung-Wei Chiucc6e6552020-06-04 12:57:38 -07001448 ... ${rg_ip} ${rg_user} ${rg_pass} ${container_type} ${container_name}
Suraj Gour33651272020-05-04 10:10:16 +05301449
1450Create traffic with each pbit and capture at other end
1451 [Documentation] Generates upstream traffic using Mausezahn tool
1452 ... with each pbit and validates reception at other end using tcpdump
1453 [Arguments] ${target_ip} ${target_iface} ${src_iface}
Girish Gowdra66cd95d2021-07-08 10:31:54 -07001454 ... ${packet_count} ${packet_type} ${c_vlan} ${s_vlan} ${direction} ${tcpdump_filter}
Suraj Gour33651272020-05-04 10:10:16 +05301455 ... ${dst_ip} ${dst_user} ${dst_pass} ${dst_container_type} ${dst_container_name}
1456 ... ${src_ip} ${src_user} ${src_pass} ${src_container_type} ${src_container_name}
1457 FOR ${pbit} IN RANGE 8
Andy Baviereff938d2020-06-29 18:27:49 -07001458 Execute Remote Command sudo pkill mausezahn
Suraj Gour33651272020-05-04 10:10:16 +05301459 ... ${src_ip} ${src_user} ${src_pass} ${src_container_type} ${src_container_name}
Girish Gowdrabbfbbc32021-05-17 14:36:58 -07001460 ${var1}= Set Variable sudo mausezahn ${src_iface} -B ${target_ip} -c ${packet_count}
Girish Gowdra66cd95d2021-07-08 10:31:54 -07001461 ${var2}= Run Keyword If "${direction}"=="downstream"
1462 ... Set Variable -t ${packet_type} "dp=80, flags=rst, p=aa:aa:aa" -Q ${pbit}:${s_vlan},${pbit}:${c_vlan}
1463 ... ELSE
1464 ... Set Variable -t ${packet_type} "dp=80, flags=rst, p=aa:aa:aa" -Q ${pbit}:${c_vlan}
Suraj Gour33651272020-05-04 10:10:16 +05301465 ${cmd}= Set Variable ${var1} ${var2}
1466 Start Remote Command ${cmd} ${src_ip} ${src_user} ${src_pass}
1467 ... ${src_container_type} ${src_container_name}
1468 ${output} ${stderr} ${rc}= Execute Remote Command
Andy Baviereff938d2020-06-29 18:27:49 -07001469 ... sudo tcpdump -l -U -c 30 -i ${target_iface} -e ${tcpdump_filter}
Suraj Gour33651272020-05-04 10:10:16 +05301470 ... ${dst_ip} ${dst_user} ${dst_pass} ${dst_container_type} ${dst_container_name}
Andy Baviereff938d2020-06-29 18:27:49 -07001471 ... timeout=30 seconds
1472 Execute Remote Command sudo pkill mausezahn
Suraj Gour33651272020-05-04 10:10:16 +05301473 ... ${src_ip} ${src_user} ${src_pass} ${src_container_type} ${src_container_name}
Girish Gowdrabbfbbc32021-05-17 14:36:58 -07001474 Run Keyword If "${tcpdump_filter}"=="tcp"
Girish Gowdraebeca682021-05-18 14:44:41 -07001475 ... Should Match Regexp ${output} , p ${pbit},
Suraj Gour33651272020-05-04 10:10:16 +05301476 END
TorstenThieme70bc5262021-01-19 12:12:55 +00001477
1478Determine Number Of ONU
1479 [Arguments] ${olt_serial_number}=${EMPTY} ${num_onus}=${num_all_onus}
1480 [Documentation] Determine the number of different ONUs for the given OLT taken from host.src
1481 ${onu_list} Create List
1482 FOR ${INDEX} IN RANGE 0 ${num_onus}
1483 Continue For Loop If "${olt_serial_number}"!="${hosts.src[${INDEX}].olt}" and "${olt_serial_number}"!="${EMPTY}"
1484 ${onu_id}= Get Index From List ${onu_list} ${hosts.src[${INDEX}].onu}
1485 Run Keyword If -1 == ${onu_id} Append To List ${onu_list} ${hosts.src[${INDEX}].onu}
1486 END
1487 ${real_num_onus}= Get Length ${onu_list}
1488 [Return] ${real_num_onus}
Hardik Windlass44abec12021-09-27 07:52:33 +00001489
1490Validate Cleanup In ETCD
1491 [Documentation] The keyword verifies that device, ports, flows, meters are all cleared in ETCD
Andrea Campanella388cd872022-02-10 09:11:39 +01001492 [Arguments] ${namespace}=default ${defaultkvstoreprefix}=voltha/voltha_voltha
Hardik Windlass44abec12021-09-27 07:52:33 +00001493 ${podname}= Set Variable etcd
1494 ${kvstoreprefix}= Get Kv Store Prefix ${defaultkvstoreprefix}
1495 # Log Devices Output and Verify Output Should be Empty
1496 ${commandget}= Catenate
1497 ... /bin/sh -c 'ETCDCTL_API=3 etcdctl get --prefix service/${kvstoreprefix}/devices --keys-only'
1498 ${result}= Exec Pod In Kube ${namespace} ${podname} ${commandget}
1499 Log ${result}
1500 Should Be Empty ${result} Stale Devices Data in Etcd!
1501 # Log Flows Output and Verify Output Should be Empty
1502 ${commandget}= Catenate
1503 ... /bin/sh -c 'ETCDCTL_API=3 etcdctl get --prefix service/${kvstoreprefix}/flows --keys-only'
1504 ${result}= Exec Pod In Kube ${namespace} ${podname} ${commandget}
1505 Log ${result}
1506 Should Be Empty ${result} Stale Flows Data in Etcd!
1507 # Log LogicalDevices Output and Verify Output Should be Empty
1508 ${commandget}= Catenate
1509 ... /bin/sh -c 'ETCDCTL_API=3 etcdctl get --prefix service/${kvstoreprefix}/logical_devices --keys-only'
1510 ${result}= Exec Pod In Kube ${namespace} ${podname} ${commandget}
1511 Log ${result}
1512 Should Be Empty ${result} Stale Logical Devices Data in Etcd!
1513 # Log LogicalFlows Output and Verify Output Should be Empty
1514 ${commandget}= Catenate
1515 ... /bin/sh -c 'ETCDCTL_API=3 etcdctl get --prefix service/${kvstoreprefix}/logical_flows --keys-only'
1516 ${result}= Exec Pod In Kube ${namespace} ${podname} ${commandget}
1517 Log ${result}
1518 Should Be Empty ${result} Stale Logical Flows Data in Etcd!
1519 # Log LogicalMeters Output and Verify Output Should be Empty
1520 ${commandget}= Catenate
1521 ... /bin/sh -c 'ETCDCTL_API=3 etcdctl get --prefix service/${kvstoreprefix}/logical_meters --keys-only'
1522 ${result}= Exec Pod In Kube ${namespace} ${podname} ${commandget}
1523 Log ${result}
1524 Should Be Empty ${result} Stale Logical Meters Data in Etcd!
1525 # Log LogicalPorts Output and Verify Output Should be Empty
1526 ${commandget}= Catenate
1527 ... /bin/sh -c 'ETCDCTL_API=3 etcdctl get --prefix service/${kvstoreprefix}/logical_ports --keys-only'
1528 ${result}= Exec Pod In Kube ${namespace} ${podname} ${commandget}
1529 Log ${result}
1530 Should Be Empty ${result} Stale Logical Ports Data in Etcd!
1531 # Log Openolt Output and Verify Output Should be Empty
1532 ${commandget}= Catenate
1533 ... /bin/sh -c 'ETCDCTL_API=3 etcdctl get --prefix service/${kvstoreprefix}/openolt --keys-only'
1534 ${result}= Exec Pod In Kube ${namespace} ${podname} ${commandget}
1535 Log ${result}
1536 Should Be Empty ${result} Stale Openolt Data in Etcd!
1537 # Log Openonu Output and Verify Output Should be Empty
1538 ${commandget}= Catenate
1539 ... /bin/sh -c 'ETCDCTL_API=3 etcdctl get --prefix service/${kvstoreprefix}/openonu --keys-only'
1540 ${result}= Exec Pod In Kube ${namespace} ${podname} ${commandget}
1541 Log ${result}
1542 Should Be Empty ${result} Stale Openonu Data in Etcd!
1543 # Log Ports Output and Verify Output Should be Empty
1544 ${commandget}= Catenate
1545 ... /bin/sh -c 'ETCDCTL_API=3 etcdctl get --prefix service/${kvstoreprefix}/ports --keys-only'
1546 ${result}= Exec Pod In Kube ${namespace} ${podname} ${commandget}
1547 Log ${result}
1548 Should Be Empty ${result} Stale Ports Data in Etcd!
1549 # Log ResourceInstances Output and Verify Output Should be Empty
1550 ${commandget}= Catenate
1551 ... /bin/sh -c 'ETCDCTL_API=3 etcdctl get --prefix service/${kvstoreprefix}/resource_instances --keys-only'
1552 ${result}= Exec Pod In Kube ${namespace} ${podname} ${commandget}
1553 Log ${result}
1554 Should Be Empty ${result} Stale Resource Instances Data in Etcd!
1555 # Log ResourceManager Output and Verify Output Should be Empty
1556 ${commandget}= Catenate
1557 ... /bin/sh -c 'ETCDCTL_API=3 etcdctl get --prefix service/${kvstoreprefix}/resource_manager --keys-only'
1558 ${result}= Exec Pod In Kube ${namespace} ${podname} ${commandget}
1559 Log ${result}
1560 Should Be Empty ${result} Stale Resource Manager Data in Etcd!
Hardik Windlass81375222021-12-02 10:48:01 +00001561
Hardik Windlass81375222021-12-02 10:48:01 +00001562Clean Up All Nodes
1563 [Documentation] Login to each node and kill all stale lxc prcoesses
1564 ${num_nodes}= Get Length ${nodes}
1565 FOR ${I} IN RANGE 0 ${num_nodes}
1566 ${node_ip}= Evaluate ${nodes}[${I}].get("ip")
1567 ${node_user}= Evaluate ${nodes}[${I}].get("user")
1568 ${node_pass}= Evaluate ${nodes}[${I}].get("pass")
1569 Run Keyword And Continue On Failure Start Remote Command kill -9 `pidof lxc`
1570 ... ${node_ip} ${node_user} ${node_pass}
1571 END
Girish Gowdrafc0bdf22021-12-06 16:57:50 +05301572
1573Reboot XGSPON ONU
1574 [Documentation] Reboots the XGSPON ONU and verifies the ONU state after the reboot
1575 [Arguments] ${olt_sn} ${onu_sn} ${reason}
1576 FOR ${I} IN RANGE 0 ${num_olts}
1577 ${serial_number} Evaluate ${olts}[${I}].get("serial")
1578 Continue For Loop If "${serial_number}"!="${olt_sn}"
1579 ${board_tech} Evaluate ${olts}[${I}].get("board_technology")
1580 ${onu_device_id}= Get Device ID From SN ${onu_sn}
1581 Run Keyword If "${board_tech}"=="XGS-PON" Run Keywords
1582 ... Reboot Device ${onu_device_id}
1583 ... AND Wait Until Keyword Succeeds 120s 5s
1584 ... Validate Device ENABLED ACTIVE
1585 ... REACHABLE ${onu_sn} onu=True onu_reason=${reason}
1586 END
Girish Gowdra8fd96962021-12-14 16:20:04 +05301587
1588Set Non-Critical Tag for XGSPON Tech
1589 [Documentation] Dynamically sets the test tag for xgs-pon based to non-critical
1590 FOR ${I} IN RANGE 0 ${num_olts}
1591 ${board_tech} Evaluate ${olts}[${I}].get("board_technology")
1592 Run Keyword If "${board_tech}"=="XGS-PON" Run Keywords
1593 ... Set Tags non-critical
1594 ... AND Exit For Loop
1595 END