blob: 64b4c84dfc9442f9fbf614290fff6139e2079fac [file] [log] [blame]
Kailash92764922019-07-25 08:21:39 -07001# Copyright 2017-present Open Networking Foundation
2#
3# Licensed under the Apache License, Version 2.0 (the "License");
4# you may not use this file except in compliance with the License.
5# You may obtain a copy of the License at
6#
7# http://www.apache.org/licenses/LICENSE-2.0
8#
9# Unless required by applicable law or agreed to in writing, software
10# distributed under the License is distributed on an "AS IS" BASIS,
11# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
12# See the License for the specific language governing permissions and
13# limitations under the License.
Kailash92764922019-07-25 08:21:39 -070014# robot test functions
15
16*** Settings ***
17Documentation Library for various utilities
18Library SSHLibrary
Kailash92764922019-07-25 08:21:39 -070019Library String
20Library DateTime
21Library Process
22Library Collections
23Library RequestsLibrary
24Library OperatingSystem
Andy Bavier63460da2020-02-20 14:35:12 -070025Library CORDRobot
26Library ImportResource resources=CORDRobot
TorstenThiemed4f48962020-12-08 12:17:19 +000027Resource ./voltctl.robot
Kailash92764922019-07-25 08:21:39 -070028
29*** Keywords ***
Kailash528f7c02019-07-31 10:55:49 -070030Check CLI Tools Configured
31 [Documentation] Tests that use 'voltctl' and 'kubectl' should execute this keyword in suite setup
32 # check voltctl and kubectl configured
Matteo Scandolo1eacdd82021-06-28 10:32:19 +020033 ${voltctl_rc} ${voltctl_output}= Run And Return Rc And Output voltctl -c ${VOLTCTL_CONFIG} device list
Hardik Windlass13803172021-04-26 08:17:07 +000034 Log ${voltctl_output}
35 ${kubectl_rc} ${kubectl_output}= Run And Return Rc And Output kubectl get pods
36 Log ${kubectl_output}
Gilles Depatie675a2062019-10-22 12:44:42 -040037 Run Keyword If ${voltctl_rc} != 0 or ${kubectl_rc} != 0 FATAL ERROR
38 ... VOLTCTL and KUBECTL not configured. Please configure before executing tests.
Gilles Depatieb5682f82019-10-31 10:39:45 -040039
40Send File To Onos
Zack Williamsa8fe75a2020-01-10 14:25:27 -070041 [Documentation] Send the content of the file to Onos to selected section of configuration
42 ... using Post Request
Huseyin Ahmet AYDIN42d3b712021-06-10 14:46:17 +000043 [Arguments] ${CONFIG_FILE} ${section}=${EMPTY}
Zack Williamsa8fe75a2020-01-10 14:25:27 -070044 ${Headers}= Create Dictionary Content-Type application/json
45 ${File_Data}= OperatingSystem.Get File ${CONFIG_FILE}
46 Log ${Headers}
47 Log ${File_Data}
48 ${resp}= Post Request ONOS
49 ... /onos/v1/network/configuration/${section} headers=${Headers} data=${File_Data}
50 Should Be Equal As Strings ${resp.status_code} 200
Andy Bavier88cd9f62019-11-26 16:22:33 -070051
52Common Test Suite Setup
53 [Documentation] Setup the test suite
Andy Bavier88cd9f62019-11-26 16:22:33 -070054 Set Global Variable ${KUBECTL_CONFIG} export KUBECONFIG=%{KUBECONFIG}
Matteo Scandolo5899be12020-11-11 15:38:07 -080055 Set Global Variable ${VOLTCTL_CONFIG} %{VOLTCONFIG}
Andy Bavier88cd9f62019-11-26 16:22:33 -070056 ${k8s_node_ip}= Evaluate ${nodes}[0].get("ip")
ubuntu6b6e7d42020-03-02 12:35:42 -080057 ${ONOS_REST_IP}= Get Environment Variable ONOS_REST_IP ${k8s_node_ip}
58 ${ONOS_SSH_IP}= Get Environment Variable ONOS_SSH_IP ${k8s_node_ip}
59 Set Global Variable ${ONOS_REST_IP}
60 Set Global Variable ${ONOS_SSH_IP}
Andy Bavier88cd9f62019-11-26 16:22:33 -070061 ${k8s_node_user}= Evaluate ${nodes}[0].get("user")
62 ${k8s_node_pass}= Evaluate ${nodes}[0].get("pass")
63 Check CLI Tools Configured
64 ${onos_auth}= Create List karaf karaf
65 ${HEADERS} Create Dictionary Content-Type=application/json
ubuntu6b6e7d42020-03-02 12:35:42 -080066 Create Session ONOS http://${ONOS_REST_IP}:${ONOS_REST_PORT} auth=${ONOS_AUTH}
Suchitra Vemuria6879aa2020-11-03 11:03:11 -080067 ${num_olts} Get Length ${olts}
68 ${list_olts} Create List
Suchitra Vemuriac9785e2021-01-07 16:50:18 -080069 # Create olt list from the configuration file
Suchitra Vemuria6879aa2020-11-03 11:03:11 -080070 FOR ${I} IN RANGE 0 ${num_olts}
71 ${ip} Evaluate ${olts}[${I}].get("ip")
72 ${user} Evaluate ${olts}[${I}].get("user")
73 ${pass} Evaluate ${olts}[${I}].get("pass")
74 ${serial_number} Evaluate ${olts}[${I}].get("serial")
75 ${olt_ssh_ip} Evaluate ${olts}[${I}].get("sship")
Andrea Campanella3dcce272021-01-15 16:04:47 +010076 ${type} Evaluate ${olts}[${I}].get("type")
Suchitra Vemuri09f878d2021-02-10 18:19:04 -080077 ${orig_olt_port} Evaluate ${olts}[${I}].get("oltPort")
78 ${port}= Set Variable If "${orig_olt_port}" == "None" ${OLT_PORT} ${orig_olt_port}
Suchitra Vemuria6879aa2020-11-03 11:03:11 -080079 ${onu_count}= Get ONU Count For OLT ${hosts.src} ${serial_number}
Suchitra Vemurife309412020-12-01 19:19:52 -080080 ${onu_list}= Get ONU List For OLT ${hosts.src} ${serial_number}
Suchitra Vemuria6879aa2020-11-03 11:03:11 -080081 ${olt} Create Dictionary ip ${ip} user ${user} pass
Andrea Campanella3dcce272021-01-15 16:04:47 +010082 ... ${pass} sn ${serial_number} onucount ${onu_count} type ${type}
Suchitra Vemuri09f878d2021-02-10 18:19:04 -080083 ... sship ${olt_ssh_ip} oltport ${port} onus ${onu_list}
Suchitra Vemuria6879aa2020-11-03 11:03:11 -080084 Append To List ${list_olts} ${olt}
85 END
86 ${num_all_onus}= Get Length ${hosts.src}
87 ${num_all_onus}= Convert to String ${num_all_onus}
Andy Bavier88cd9f62019-11-26 16:22:33 -070088 #send sadis file to onos
Andy Baviera2691752019-11-27 12:18:38 -070089 ${sadis_file}= Get Variable Value ${sadis.file}
Zack Williamsa8fe75a2020-01-10 14:25:27 -070090 Log To Console \nSadis File:${sadis_file}
Andy Bavier88cd9f62019-11-26 16:22:33 -070091 Run Keyword Unless '${sadis_file}' is '${None}' Send File To Onos ${sadis_file} apps/
Suchitra Vemuria6879aa2020-11-03 11:03:11 -080092 Set Suite Variable ${num_all_onus}
93 Set Suite Variable ${num_olts}
94 Set Suite Variable ${list_olts}
95 ${olt_count}= Get Length ${list_olts}
96 Set Suite Variable ${olt_count}
Andrea Campanella3dcce272021-01-15 16:04:47 +010097 @{container_list}= Create List ${OLT_ADAPTER_APP_LABEL} adapter-open-onu voltha-api-server
Andy Bavier88cd9f62019-11-26 16:22:33 -070098 ... voltha-ro-core voltha-rw-core-11 voltha-rw-core-12 voltha-ofagent
99 Set Suite Variable ${container_list}
100 ${datetime}= Get Current Date
suraj gour7f6d5fe2019-11-29 10:56:35 +0000101 Set Suite Variable ${datetime}
102
Suchitra Vemuria6879aa2020-11-03 11:03:11 -0800103Get ONU Count For OLT
104 [Arguments] ${src} ${serial_number}
105 [Documentation] Gets ONU Count for the specified OLT
106 ${src_length}= Get Length ${src}
107 ${count}= Set Variable 0
108 FOR ${I} IN RANGE 0 ${src_length}
109 ${sn} Evaluate ${src}[${I}].get("olt")
TorstenThiemed4f48962020-12-08 12:17:19 +0000110 ${count}= Run Keyword If '${serial_number}' == '${sn}' Evaluate ${count} + 1
111 ... ELSE Set Variable ${count}
Suchitra Vemuria6879aa2020-11-03 11:03:11 -0800112 END
113 [Return] ${count}
114
Suchitra Vemurife309412020-12-01 19:19:52 -0800115Get ONU List For OLT
116 [Arguments] ${src} ${serial_number}
117 [Documentation] Gets ONU List for the specified OLT
118 ${src_length}= Get Length ${src}
119 ${onu_list}= Create List
120 FOR ${I} IN RANGE 0 ${src_length}
121 ${sn} Evaluate ${src}[${I}].get("olt")
122 Run Keyword If '${serial_number}' == '${sn}' Append To List ${onu_list} ${src}[${I}].get("onu")
123 ... ELSE Set Variable ${onu_list}
124 END
125 [Return] ${onu_list}
126
suraj gour7f6d5fe2019-11-29 10:56:35 +0000127WPA Reassociate
suraj gour7f6d5fe2019-11-29 10:56:35 +0000128 [Documentation] Executes a particular wpa_cli reassociate, which performs force reassociation
Zack Williamsa8fe75a2020-01-10 14:25:27 -0700129 [Arguments] ${iface} ${ip} ${user} ${pass}=${None}
130 ... ${container_type}=${None} ${container_name}=${None}
suraj gour7f6d5fe2019-11-29 10:56:35 +0000131 #Below for loops are used instead of sleep time, to execute reassociate command and check status
Zack Williamsa8fe75a2020-01-10 14:25:27 -0700132 FOR ${i} IN RANGE 70
133 ${output}= Login And Run Command On Remote System
134 ... wpa_cli -i ${iface} reassociate ${ip} ${user}
135 ... ${pass} ${container_type} ${container_name}
136 ${passed}= Run Keyword And Return Status Should Contain ${output} OK
Andy Bavierb63f6d22020-03-12 15:34:37 -0700137 Exit For Loop If ${passed}
Zack Williamsa8fe75a2020-01-10 14:25:27 -0700138 END
Andy Bavierb63f6d22020-03-12 15:34:37 -0700139 Should Be True ${passed} Status does not contain 'SUCCESS'
Zack Williamsa8fe75a2020-01-10 14:25:27 -0700140 FOR ${i} IN RANGE 70
141 ${output}= Login And Run Command On Remote System
Andy Bavierae4a17e2020-02-25 14:54:36 -0700142 ... wpa_cli -i ${iface} status | grep SUCCESS ${ip} ${user}
Zack Williamsa8fe75a2020-01-10 14:25:27 -0700143 ... ${pass} ${container_type} ${container_name}
144 ${passed}= Run Keyword And Return Status Should Contain ${output} SUCCESS
Andy Bavierb63f6d22020-03-12 15:34:37 -0700145 Exit For Loop If ${passed}
Zack Williamsa8fe75a2020-01-10 14:25:27 -0700146 END
Andy Bavierb63f6d22020-03-12 15:34:37 -0700147 Should Be True ${passed} Status does not contain 'SUCCESS'
Zack Williamsa8fe75a2020-01-10 14:25:27 -0700148
suraj gour7f6d5fe2019-11-29 10:56:35 +0000149Validate Authentication After Reassociate
Zack Williamsa8fe75a2020-01-10 14:25:27 -0700150 [Arguments] ${auth_pass} ${iface} ${ip} ${user} ${pass}=${None}
151 ... ${container_type}=${None} ${container_name}=${None}
152 [Documentation]
153 ... Executes a particular reassociate request on the RG using wpa_cli.
154 ... auth_pass determines if authentication should pass
Andy Bavier84834d42020-02-25 13:49:50 -0700155 ${wpa_log}= Catenate SEPARATOR=. /tmp/wpa ${iface} log
156 ${output}= Login And Run Command On Remote System truncate -s 0 ${wpa_log}; cat ${wpa_log}
157 ... ${ip} ${user} ${pass} ${container_type} ${container_name}
158 Log ${output}
159 Should Not Contain ${output} authentication completed successfully
suraj gour7f6d5fe2019-11-29 10:56:35 +0000160 WPA Reassociate ${iface} ${ip} ${user} ${pass} ${container_type} ${container_name}
Zack Williamsa8fe75a2020-01-10 14:25:27 -0700161 Run Keyword If '${auth_pass}' == 'True' Wait Until Keyword Succeeds ${timeout} 2s
Andy Bavier84834d42020-02-25 13:49:50 -0700162 ... Check Remote File Contents True ${wpa_log} ${iface}.*authentication completed successfully
Zack Williamsa8fe75a2020-01-10 14:25:27 -0700163 ... ${ip} ${user} ${pass} ${container_type} ${container_name}
suraj gour7f6d5fe2019-11-29 10:56:35 +0000164 Run Keyword If '${auth_pass}' == 'False' Sleep 20s
Suchitra Vemuri3cb29f82020-02-25 13:59:58 -0800165 Run Keyword If '${auth_pass}' == 'False' Check Remote File Contents False /tmp/wpa.log
Andy Bavier84834d42020-02-25 13:49:50 -0700166 ... ${iface}.*authentication completed successfully ${ip} ${user} ${pass}
Zack Williamsa8fe75a2020-01-10 14:25:27 -0700167 ... ${container_type} ${container_name}
suraj gourd5cfdbb2019-12-13 12:44:55 +0000168
169Send Dhclient Request To Release Assigned IP
Zack Williamsa8fe75a2020-01-10 14:25:27 -0700170 [Arguments] ${iface} ${ip} ${user} ${path_dhcpleasefile} ${pass}=${None}
171 ... ${container_type}=${None} ${container_name}=${None}
suraj gourd5cfdbb2019-12-13 12:44:55 +0000172 [Documentation] Executes a dhclient with option to release ip against a particular interface on the RG (src)
Zack Williamsa8fe75a2020-01-10 14:25:27 -0700173 ${result}= Login And Run Command On Remote System
174 ... dhclient -nw -r ${iface} && rm ${path_dhcpleasefile}/dhclient.* ${ip} ${user}
suraj gourd5cfdbb2019-12-13 12:44:55 +0000175 ... ${pass} ${container_type} ${container_name}
176 Log ${result}
177 #Should Contain ${result} DHCPRELEASE
178 [Return] ${result}
suraj gour1ecfae92019-12-20 15:11:40 +0000179
180Check Remote File Contents For WPA Logs
Zack Williamsa8fe75a2020-01-10 14:25:27 -0700181 [Arguments] ${file_should_exist} ${file} ${pattern} ${ip} ${user} ${pass}=${None}
182 ... ${container_type}=${None} ${container_name}=${None} ${prompt}=~$
suraj gour1ecfae92019-12-20 15:11:40 +0000183 [Documentation] Checks for particular pattern count in a file
Zack Williamsa8fe75a2020-01-10 14:25:27 -0700184 ${result}= Login And Run Command On Remote System
185 ... cat ${file} | grep '${pattern}' | wc -l ${ip} ${user} ${pass}
suraj gour1ecfae92019-12-20 15:11:40 +0000186 ... ${container_type} ${container_name} ${prompt}
187 [Return] ${result}
Gayathri.Selvanee4a91b2020-01-17 06:49:53 +0000188
Suchitra Vemuria6879aa2020-11-03 11:03:11 -0800189
Gayathri.Selvanee4a91b2020-01-17 06:49:53 +0000190Perform Sanity Test
Suchitra Vemuria6879aa2020-11-03 11:03:11 -0800191 [Documentation] This keyword iterate all OLTs and performs Sanity Test Procedure
192 ... for all the ONUs connected to each OLT - ATT workflow
TorstenThiemec3c23232021-01-13 13:06:31 +0000193 ... For repeating sanity test without subscriber changes set flag supress_add_subscriber=True.
194 ... In all other (common) cases flag has to be set False (default).
195 [Arguments] ${supress_add_subscriber}=False
Suchitra Vemuria6879aa2020-11-03 11:03:11 -0800196 FOR ${J} IN RANGE 0 ${num_olts}
197 ${olt_serial_number}= Set Variable ${list_olts}[${J}][sn]
198 ${onu_count}= Set Variable ${list_olts}[${J}][onucount]
199 ${of_id}= Wait Until Keyword Succeeds ${timeout} 15s Validate OLT Device in ONOS
200 ... ${olt_serial_number}
201 Set Global Variable ${of_id}
202 ${nni_port}= Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s
203 ... Get NNI Port in ONOS ${of_id}
204 Set Global Variable ${nni_port}
205 # Verify Default Meter in ONOS (valid only for ATT)
206 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
207 ... Verify Default Meter Present in ONOS ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${of_id}
208 Perform Sanity Test Per OLT ${of_id} ${nni_port} ${olt_serial_number} ${onu_count}
TorstenThiemec3c23232021-01-13 13:06:31 +0000209 ... ${supress_add_subscriber}
Suchitra Vemuria6879aa2020-11-03 11:03:11 -0800210 END
211
212Perform Sanity Test Per OLT
TorstenThiemec3c23232021-01-13 13:06:31 +0000213 [Arguments] ${of_id} ${nni_port} ${olt_serial_number} ${num_onus} ${supress_add_subscriber}=False
Gayathri.Selvanee4a91b2020-01-17 06:49:53 +0000214 [Documentation] This keyword performs Sanity Test Procedure
215 ... Sanity test performs authentication, dhcp and pings for all the ONUs given for the POD
216 ... This keyword can be used to call in any other tests where sanity check is required
Suchitra Vemuria6879aa2020-11-03 11:03:11 -0800217 ... and avoids duplication of code. - ATT workflow
TorstenThiemec3c23232021-01-13 13:06:31 +0000218 ... For repeating sanity test without subscriber changes set flag supress_add_subscriber=True.
219 ... In all other (common) cases flag has to be set False (default).
Suchitra Vemuria6879aa2020-11-03 11:03:11 -0800220 FOR ${I} IN RANGE 0 ${num_all_onus}
Gayathri.Selvanee4a91b2020-01-17 06:49:53 +0000221 ${src}= Set Variable ${hosts.src[${I}]}
222 ${dst}= Set Variable ${hosts.dst[${I}]}
Suchitra Vemuria6879aa2020-11-03 11:03:11 -0800223 Continue For Loop If "${olt_serial_number}"!="${src['olt']}"
Gayathri.Selvanee4a91b2020-01-17 06:49:53 +0000224 ${onu_device_id}= Get Device ID From SN ${src['onu']}
225 ${onu_port}= Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s
Hardik Windlass1ed2eee2021-06-25 09:51:03 +0000226 ... Get ONU Port in ONOS ${src['onu']} ${of_id} ${src['uni_id']}
Suchitra Vemuri8078b972020-02-06 19:07:41 -0800227 # Check ONU port is Enabled in ONOS
228 Run Keyword And Continue On Failure Wait Until Keyword Succeeds 120s 2s
Hardik Windlass39015672021-07-05 05:48:08 +0000229 ... Verify UNI Port Is Enabled ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${src['onu']} ${src['uni_id']}
Suchitra Vemuri8078b972020-02-06 19:07:41 -0800230 # Verify EAPOL flows are added for the ONU port
TorstenThiemec3c23232021-01-13 13:06:31 +0000231 Run Keyword Unless ${supress_add_subscriber}
232 ... Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s
ubuntu6b6e7d42020-03-02 12:35:42 -0800233 ... Verify Eapol Flows Added For ONU ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${onu_port}
Suchitra Vemuri8078b972020-02-06 19:07:41 -0800234 # Verify ONU state in voltha
235 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s Validate Device
236 ... ENABLED ACTIVE REACHABLE
237 ... ${src['onu']} onu=True onu_reason=omci-flows-pushed
238 # Perform Authentication
Andy Bavier84834d42020-02-25 13:49:50 -0700239 ${wpa_log}= Run Keyword If ${has_dataplane} Catenate SEPARATOR=.
240 ... /tmp/wpa ${src['dp_iface_name']} log
Gayathri.Selvanee4a91b2020-01-17 06:49:53 +0000241 Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure Validate Authentication True
242 ... ${src['dp_iface_name']} wpa_supplicant.conf ${src['ip']} ${src['user']} ${src['pass']}
Andy Bavier84834d42020-02-25 13:49:50 -0700243 ... ${src['container_type']} ${src['container_name']} ${wpa_log}
Gayathri.Selvanee4a91b2020-01-17 06:49:53 +0000244 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2
ubuntu6b6e7d42020-03-02 12:35:42 -0800245 ... Verify ONU in AAA-Users ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${onu_port}
TorstenThiemec3c23232021-01-13 13:06:31 +0000246 Run Keyword Unless ${supress_add_subscriber}
247 ... Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2
TorstenThieme4e2168e2021-06-22 14:01:47 +0000248 ... Execute ONOS CLI Command use single connection ${ONOS_SSH_IP} ${ONOS_SSH_PORT}
Gayathri.Selvanee4a91b2020-01-17 06:49:53 +0000249 ... volt-add-subscriber-access ${of_id} ${onu_port}
Suchitra Vemuri9da44302020-03-04 14:24:49 -0800250 # Verify that no pending flows exist for the ONU port
251 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s
252 ... Verify No Pending Flows For ONU ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${onu_port}
Hardik Windlass21807632020-04-14 16:24:55 +0530253 # Verify subscriber access flows are added for the ONU port
254 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
255 ... Verify Subscriber Access Flows Added For ONU ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${of_id}
256 ... ${onu_port} ${nni_port} ${src['c_tag']} ${src['s_tag']}
Hardik Windlass2a9b1592020-07-23 18:28:13 +0530257 # Verify Meters in ONOS
258 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
259 ... Verify Meters in ONOS ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${of_id} ${onu_port}
Gayathri.Selvanee4a91b2020-01-17 06:49:53 +0000260 Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure Validate DHCP and Ping True
261 ... True ${src['dp_iface_name']} ${src['s_tag']} ${src['c_tag']} ${dst['dp_iface_ip_qinq']}
262 ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
263 ... ${dst['dp_iface_name']} ${dst['ip']} ${dst['user']} ${dst['pass']} ${dst['container_type']}
264 ... ${dst['container_name']}
265 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s
ubuntu6b6e7d42020-03-02 12:35:42 -0800266 ... Validate Subscriber DHCP Allocation ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${onu_port}
Gayathri.Selvanee4a91b2020-01-17 06:49:53 +0000267 END
268
Hardik Windlassa3d04b92020-02-17 15:06:05 +0000269Perform Sanity Test DT
Suchitra Vemuria6879aa2020-11-03 11:03:11 -0800270 [Documentation] This keyword iterate all OLTs and performs Sanity Test Procedure for DT workflow
TorstenThiemec3c23232021-01-13 13:06:31 +0000271 ... For repeating sanity test without subscriber changes set flag supress_add_subscriber=True.
272 ... In all other (common) cases flag has to be set False (default).
273 [Arguments] ${supress_add_subscriber}=False
Suchitra Vemuria6879aa2020-11-03 11:03:11 -0800274 FOR ${J} IN RANGE 0 ${num_olts}
275 ${olt_serial_number}= Set Variable ${list_olts}[${J}][sn]
276 ${num_onus}= Set Variable ${list_olts}[${J}][onucount]
277 ${olt_device_id}= Get OLTDeviceID From OLT List ${olt_serial_number}
278 ${of_id}= Wait Until Keyword Succeeds ${timeout} 15s Validate OLT Device in ONOS
279 ... ${olt_serial_number}
280 Set Global Variable ${of_id}
281 ${nni_port}= Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s
282 ... Get NNI Port in ONOS ${of_id}
283 Set Global Variable ${nni_port}
284 Perform Sanity Test DT Per OLT ${of_id} ${nni_port} ${olt_serial_number} ${num_onus}
TorstenThiemec3c23232021-01-13 13:06:31 +0000285 ... ${supress_add_subscriber}
Suchitra Vemuria6879aa2020-11-03 11:03:11 -0800286 # Verify ONOS Flows
287 # Number of Access Flows on ONOS equals 4 * the Number of Active ONUs (2 for each downstream and upstream)
288 ${onos_flows_count}= Evaluate 4 * ${num_onus}
289 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
290 ... Verify Subscriber Access Flows Added Count DT ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${of_id}
291 ... ${onos_flows_count}
292 # Verify VOLTHA Flows
293 # Number of per OLT Flows equals Twice the Number of Active ONUs (each for downstream and upstream) + 1 for LLDP
294 ${olt_flows}= Evaluate 2 * ${num_onus} + 1
295 # Number of per ONU Flows equals 2 (one each for downstream and upstream)
296 ${onu_flows}= Set Variable 2
297 Run Keyword Wait Until Keyword Succeeds ${timeout} 5s Validate OLT Flows ${olt_flows}
298 ... ${olt_device_id}
299 ${List_ONU_Serial} Create List
300 Set Suite Variable ${List_ONU_Serial}
Suchitra Vemuri21a47fd2020-11-16 18:39:09 -0800301 Build ONU SN List ${List_ONU_Serial} ${olt_serial_number}
Suchitra Vemuria6879aa2020-11-03 11:03:11 -0800302 Log ${List_ONU_Serial}
303 Run Keyword Wait Until Keyword Succeeds ${timeout} 5s Validate ONU Flows
304 ... ${List_ONU_Serial} ${onu_flows}
305 END
306
307
308Perform Sanity Test DT Per OLT
TorstenThiemec3c23232021-01-13 13:06:31 +0000309 [Arguments] ${of_id} ${nni_port} ${olt_serial_number} ${num_onus} ${supress_add_subscriber}=False
Hardik Windlassa3d04b92020-02-17 15:06:05 +0000310 [Documentation] This keyword performs Sanity Test Procedure for DT Workflow
311 ... Sanity test performs dhcp and pings (without EAPOL and DHCP flows) for all the ONUs given for the POD
312 ... This keyword can be used to call in any other tests where sanity check is required
313 ... and avoids duplication of code.
TorstenThiemec3c23232021-01-13 13:06:31 +0000314 ... For repeating sanity test without subscriber changes set flag supress_add_subscriber=True.
315 ... In all other (common) cases flag has to be set False (default).
Suchitra Vemuria6879aa2020-11-03 11:03:11 -0800316 FOR ${I} IN RANGE 0 ${num_all_onus}
Hardik Windlassa3d04b92020-02-17 15:06:05 +0000317 ${src}= Set Variable ${hosts.src[${I}]}
318 ${dst}= Set Variable ${hosts.dst[${I}]}
Suchitra Vemuria6879aa2020-11-03 11:03:11 -0800319 Continue For Loop If "${olt_serial_number}"!="${src['olt']}"
Hardik Windlassa3d04b92020-02-17 15:06:05 +0000320 ${onu_device_id}= Get Device ID From SN ${src['onu']}
321 ${onu_port}= Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s
322 ... Get ONU Port in ONOS ${src['onu']} ${of_id}
323 # Check ONU port is Enabled in ONOS
324 Run Keyword And Continue On Failure Wait Until Keyword Succeeds 120s 2s
Hardik Windlass39015672021-07-05 05:48:08 +0000325 ... Verify UNI Port Is Enabled ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${src['onu']}
TorstenThiemec3c23232021-01-13 13:06:31 +0000326 Run Keyword Unless ${supress_add_subscriber}
327 ... Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2
TorstenThieme4e2168e2021-06-22 14:01:47 +0000328 ... Execute ONOS CLI Command use single connection ${ONOS_SSH_IP} ${ONOS_SSH_PORT}
Hardik Windlassa3d04b92020-02-17 15:06:05 +0000329 ... volt-add-subscriber-access ${of_id} ${onu_port}
Hardik Windlassfb5eace2020-03-26 14:49:01 +0530330 # Verify subscriber access flows are added for the ONU port
331 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
Hardik Windlass25e11702020-03-30 20:05:19 +0530332 ... Verify Subscriber Access Flows Added For ONU DT ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${of_id}
333 ... ${onu_port} ${nni_port} ${src['s_tag']}
TorstenThiemea36068c2021-02-19 09:57:32 +0000334 # Verify ONU state in voltha
335 ${onu_reasons}= Create List omci-flows-pushed
336 # In case of previous dis- and enable of ONU and no further subscriber add actions state will be onu-reenabled
337 Run Keyword If ${supress_add_subscriber} Append To List ${onu_reasons} onu-reenabled
Hardik Windlassa3d04b92020-02-17 15:06:05 +0000338 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s Validate Device
339 ... ENABLED ACTIVE REACHABLE
TorstenThiemec3c23232021-01-13 13:06:31 +0000340 ... ${src['onu']} onu=True onu_reason=${onu_reasons}
Hardik Windlass2a9b1592020-07-23 18:28:13 +0530341 # Verify Meters in ONOS
342 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
Girish Gowdra21ec25d2021-05-24 10:07:01 -0700343 ... Verify Meters in ONOS Ietf ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${of_id} ${onu_port}
Hardik Windlassfb5eace2020-03-26 14:49:01 +0530344 # TODO: Yet to Verify on the GPON based Physical POD (VOL-2652)
Hardik Windlassa3d04b92020-02-17 15:06:05 +0000345 Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure Validate DHCP and Ping True
346 ... True ${src['dp_iface_name']} ${src['s_tag']} ${src['c_tag']} ${dst['dp_iface_ip_qinq']}
347 ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
348 ... ${dst['dp_iface_name']} ${dst['ip']} ${dst['user']} ${dst['pass']} ${dst['container_type']}
349 ... ${dst['container_name']}
Hardik Windlassa3d04b92020-02-17 15:06:05 +0000350 END
Suchitra Vemuria6879aa2020-11-03 11:03:11 -0800351
352Validate All OLT Flows
353 [Documentation] This keyword iterate all OLTs and performs Sanity Test Procedure for DT workflow
354 FOR ${J} IN RANGE 0 ${num_olts}
355 ${olt_serial_number}= Set Variable ${list_olts}[${J}][sn]
356 ${num_onus}= Set Variable ${list_olts}[${J}][onucount]
357 ${olt_device_id}= Get OLTDeviceID From OLT List ${olt_serial_number}
358 ${of_id}= Wait Until Keyword Succeeds ${timeout} 15s Validate OLT Device in ONOS
359 ... ${olt_serial_number}
360 Set Global Variable ${of_id}
361 # Verify ONOS Flows
362 # Number of Access Flows on ONOS equals 4 * the Number of Active ONUs (2 for each downstream and upstream)
363 ${onos_flows_count}= Evaluate 4 * ${num_onus}
364 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
365 ... Verify Subscriber Access Flows Added Count DT ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${of_id}
366 ... ${onos_flows_count}
367 # Verify VOLTHA Flows
368 # Number of per OLT Flows equals Twice the Number of Active ONUs (each for downstream and upstream) + 1 for LLDP
369 ${olt_flows}= Evaluate 2 * ${num_onus} + 1
370 # Number of per ONU Flows equals 2 (one each for downstream and upstream)
371 ${onu_flows}= Set Variable 2
372 Run Keyword Wait Until Keyword Succeeds ${timeout} 5s Validate OLT Flows ${olt_flows}
373 ... ${olt_device_id}
374 ${List_ONU_Serial} Create List
375 Set Suite Variable ${List_ONU_Serial}
Andrea Campanella6391f842020-11-16 10:01:18 +0100376 Build ONU SN List ${List_ONU_Serial} ${olt_serial_number}
Suchitra Vemuria6879aa2020-11-03 11:03:11 -0800377 Log ${List_ONU_Serial}
378 Run Keyword Wait Until Keyword Succeeds ${timeout} 5s Validate ONU Flows
379 ... ${List_ONU_Serial} ${onu_flows}
380 END
Hardik Windlassa3d04b92020-02-17 15:06:05 +0000381
TorstenThieme70bc5262021-01-19 12:12:55 +0000382Perform Sanity Tests TT
383 [Documentation] This keyword performs both Sanity Test Procedure for TT Workflow
384 ... Sanity Test TT for HSIA, VoD, VoIP services and Sanity Test TT for MCAST
385 ... For repeating sanity tests without subscriber changes set flag supress_add_subscriber=True.
386 ... In all other (common) cases flag has to be set False (default).
387 [Arguments] ${supress_add_subscriber}=False
388 Perform Sanity Test TT ${supress_add_subscriber}
TorstenThieme136ebf72021-02-26 14:27:07 +0000389 # run of mcast sanity test is currently limited for real HW
390 Run Keyword If ${has_dataplane} Perform Sanity Test TT MCAST ${supress_add_subscriber}
TorstenThieme70bc5262021-01-19 12:12:55 +0000391
Suchitra Vemuri2f1e07d2020-06-26 19:18:01 -0700392Perform Sanity Test TT
393 [Documentation] This keyword performs Sanity Test Procedure for TT Workflow
394 ... Sanity test performs dhcp and pings (without EAPOL and DHCP flows) for all the ONUs given for the POD
395 ... This keyword can be used to call in any other tests where sanity check is required
396 ... and avoids duplication of code.
TorstenThieme70bc5262021-01-19 12:12:55 +0000397 ... For repeating sanity test without subscriber changes set flag supress_add_subscriber=True.
398 ... In all other (common) cases flag has to be set False (default).
399 [Arguments] ${supress_add_subscriber}=False
Suchitra Vemuria6879aa2020-11-03 11:03:11 -0800400 FOR ${I} IN RANGE 0 ${num_all_onus}
Suchitra Vemuri85cb7d62020-07-16 23:46:16 -0700401 ${src}= Set Variable ${hosts.src[${I}]}
402 ${dst}= Set Variable ${hosts.dst[${I}]}
403 ${service_type}= Get Variable Value ${src['service_type']} "null"
TorstenThiemea36068c2021-02-19 09:57:32 +0000404 Run Keyword IF '${service_type}' != 'mcast' Sanity Test TT one ONU ${src} ${dst} ${supress_add_subscriber}
Suchitra Vemuri85cb7d62020-07-16 23:46:16 -0700405 END
Hardik Windlass3ec9d4f2021-06-08 05:48:15 +0000406 # Verify Subscriber Access Flow Count
407 @{particular_onu_device_port}= Create List
408 FOR ${I} IN RANGE 0 ${num_all_onus}
409 ${src}= Set Variable ${hosts.src[${I}]}
410 ${of_id}= Wait Until Keyword Succeeds ${timeout} 15s Validate OLT Device in ONOS ${src['olt']}
Hardik Windlass1ed2eee2021-06-25 09:51:03 +0000411 ${onu_port}= Wait Until Keyword Succeeds ${timeout} 2s Get ONU Port in ONOS
412 ... ${src['onu']} ${of_id} ${src['uni_id']}
Hardik Windlass3ec9d4f2021-06-08 05:48:15 +0000413 Append To List ${particular_onu_device_port} ${onu_port}
414 END
415 ${list_onu_port}= Remove Duplicates ${particular_onu_device_port}
416 ${num_of_provisioned_onus}= Get Length ${list_onu_port}
417 FOR ${I} IN RANGE 0 ${olt_count}
418 ${olt_serial_number}= Get From Dictionary ${olt_ids}[${I}] sn
419 ${olt_device_id}= Get OLTDeviceID From OLT List ${olt_serial_number}
Hardik Windlass315d6152021-06-09 08:22:44 +0000420 ${of_id}= Wait Until Keyword Succeeds ${timeout} 15s Validate OLT Device in ONOS ${olt_serial_number}
Hardik Windlass3ec9d4f2021-06-08 05:48:15 +0000421 ${num_onus}= Set Variable ${list_olts}[${I}][onucount]
422 # Verify ONOS Flows
423 # Number of Access Flows on ONOS equals 16 * the Number of Active ONUs + 3 for default LLDP, IGMP and DHCP
424 ${onos_flows_count}= Run Keyword If ${has_dataplane} Evaluate 16 * ${num_of_provisioned_onus} + 3
425 ... ELSE Evaluate 15 * ${num_of_provisioned_onus} + 3
426 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
427 ... Verify Added Flow Count for OLT TT ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${of_id}
428 ... ${onos_flows_count}
429 # Verify VOLTHA Flows
430 # Number of per OLT Flows equals 10 * Number of Active ONUs + 3 for default LLDP, IGMP and DHCP
431 ${olt_flows}= Run Keyword If ${has_dataplane} Evaluate 10 * ${num_of_provisioned_onus} + 3
432 ... ELSE Evaluate 9 * ${num_of_provisioned_onus} + 3
433 # Number of per ONU Flows equals 6 for 3play service data plane + 4 for Trap to Host Flows
434 ${onu_flows}= Run Keyword If ${has_dataplane} Set Variable 10
435 ... ELSE Set Variable 9
436 Run Keyword Wait Until Keyword Succeeds ${timeout} 5s Validate OLT Flows ${olt_flows}
437 ... ${olt_device_id}
438 ${List_ONU_Serial} Create List
439 Set Suite Variable ${List_ONU_Serial}
440 Build ONU SN List ${List_ONU_Serial} ${olt_serial_number} ${num_onus}
441 Log ${List_ONU_Serial}
Hardik Windlass1ed2eee2021-06-25 09:51:03 +0000442 # TODO: Fix ${onu_flows} calculations based on UNIs provisioned
443 # Run Keyword Wait Until Keyword Succeeds ${timeout} 5s Validate ONU Flows
444 # ... ${List_ONU_Serial} ${onu_flows}
Hardik Windlass3ec9d4f2021-06-08 05:48:15 +0000445 END
Suchitra Vemuri85cb7d62020-07-16 23:46:16 -0700446
447Sanity Test TT one ONU
448 [Documentation] This keyword performs sanity test for a single ONU for TT workflow
449 ... Tests for one ONU
450 ... Assertions apply to HSIA, VoD, VoIP services
TorstenThieme70bc5262021-01-19 12:12:55 +0000451 ... For repeating sanity test without subscriber changes set flag supress_add_subscriber=True.
452 ... In all other (common) cases flag has to be set False (default).
453 [Arguments] ${src} ${dst} ${supress_add_subscriber}=False
Suchitra Vemuria6879aa2020-11-03 11:03:11 -0800454 ${of_id}= Wait Until Keyword Succeeds ${timeout} 15s Validate OLT Device in ONOS ${src['olt']}
Suchitra Vemuri2f1e07d2020-06-26 19:18:01 -0700455 Set Global Variable ${of_id}
456 ${nni_port}= Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s
457 ... Get NNI Port in ONOS ${of_id}
458 Set Global Variable ${nni_port}
Suchitra Vemuri85cb7d62020-07-16 23:46:16 -0700459 ${onu_device_id}= Get Device ID From SN ${src['onu']}
460 ${onu_port}= Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s
Hardik Windlass1ed2eee2021-06-25 09:51:03 +0000461 ... Get ONU Port in ONOS ${src['onu']} ${of_id} ${src['uni_id']}
Suchitra Vemuri85cb7d62020-07-16 23:46:16 -0700462 # Check ONU port is Enabled in ONOS
463 Run Keyword And Continue On Failure Wait Until Keyword Succeeds 120s 2s
Hardik Windlass39015672021-07-05 05:48:08 +0000464 ... Verify UNI Port Is Enabled ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${src['onu']} ${src['uni_id']}
TorstenThiemea36068c2021-02-19 09:57:32 +0000465 Run Keyword Unless ${supress_add_subscriber}
466 ... Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2
TorstenThieme4e2168e2021-06-22 14:01:47 +0000467 ... Execute ONOS CLI Command use single connection ${ONOS_SSH_IP} ${ONOS_SSH_PORT}
Suchitra Vemuri85cb7d62020-07-16 23:46:16 -0700468 ... volt-add-subscriber-access ${of_id} ${onu_port}
TorstenThiemea36068c2021-02-19 09:57:32 +0000469 # Verify ONU state in voltha
Emrehan UZUNec59bea2021-05-27 13:45:57 +0000470 ${onu_reasons}= Create List omci-flows-pushed onu-reenabled
TorstenThiemea36068c2021-02-19 09:57:32 +0000471 # In case of previous dis- and enable of ONU and no further subscriber add actions state will be onu-reenabled
472 Run Keyword If ${supress_add_subscriber} Append To List ${onu_reasons} onu-reenabled
Suchitra Vemuri85cb7d62020-07-16 23:46:16 -0700473 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s Validate Device
474 ... ENABLED ACTIVE REACHABLE
Matteo Scandolo74bd5c32020-12-08 09:52:19 -0800475 ... ${src['onu']} onu=True onu_reason=${onu_reasons}
Suchitra Vemuri85cb7d62020-07-16 23:46:16 -0700476 # TODO: Yet to Verify on the GPON based Physical POD (VOL-2652)
477 Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure Validate DHCP and Ping True
478 ... True ${src['dp_iface_name']} ${src['s_tag']} ${src['c_tag']} ${dst['dp_iface_ip_qinq']}
479 ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
480 ... ${dst['dp_iface_name']} ${dst['ip']} ${dst['user']} ${dst['pass']} ${dst['container_type']}
481 ... ${dst['container_name']}
Matteo Scandolo37a6cb72021-01-08 13:55:59 -0800482 Run Keyword IF '${src['service_type']}'!='hsia'
Suchitra Vemuri42819412020-10-01 17:45:43 -0700483 ... Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s
Suchitra Vemuri8d3b0032020-09-11 17:49:08 -0700484 ... Validate Subscriber DHCP Allocation ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${onu_port}
Suchitra Vemuri42819412020-10-01 17:45:43 -0700485 ... ${src['c_tag']}
Suchitra Vemuri85cb7d62020-07-16 23:46:16 -0700486
487Perform Sanity Test TT MCAST
488 [Documentation] This keyword performs Sanity Test Procedure for TT Workflow
489 ... Adds subscribers
490 ... Validates for MCAST
TorstenThieme70bc5262021-01-19 12:12:55 +0000491 ... For repeating sanity test without subscriber changes set flag supress_add_subscriber=True.
492 ... In all other (common) cases flag has to be set False (default).
493 [Arguments] ${supress_add_subscriber}=False
Suchitra Vemuria6879aa2020-11-03 11:03:11 -0800494 FOR ${I} IN RANGE 0 ${num_all_onus}
Suchitra Vemuri2f1e07d2020-06-26 19:18:01 -0700495 ${src}= Set Variable ${hosts.src[${I}]}
496 ${dst}= Set Variable ${hosts.dst[${I}]}
Suchitra Vemuri85cb7d62020-07-16 23:46:16 -0700497 ${service_type}= Get Variable Value ${src['service_type']} "null"
498 Run Keyword IF '${service_type}' == 'mcast' Sanity Test TT MCAST one ONU ${src}
TorstenThiemea36068c2021-02-19 09:57:32 +0000499 ... ${dst} ${supress_add_subscriber}
Suchitra Vemuri2f1e07d2020-06-26 19:18:01 -0700500 END
Suchitra Vemuri85cb7d62020-07-16 23:46:16 -0700501
502Sanity Test TT MCAST one ONU
503 [Documentation] This keyword performs sanity test for a single ONU for TT workflow
504 ... Tests for one ONU
505 ... Assertions apply to MCAST services
TorstenThieme70bc5262021-01-19 12:12:55 +0000506 ... For repeating sanity test without subscriber changes set flag supress_add_subscriber=True.
507 ... In all other (common) cases flag has to be set False (default).
508 [Arguments] ${src} ${dst} ${supress_add_subscriber}=False
Suchitra Vemuri85cb7d62020-07-16 23:46:16 -0700509 # Check for iperf and jq tools
510 ${stdout} ${stderr} ${rc}= Execute Remote Command which iperf jq
511 ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']}
512 ... ${src['container_name']}
513 Pass Execution If ${rc} != 0 Skipping test: iperf / jq not found on the RG
514
515 #Reset the IP on the interface
516 ${output}= Login And Run Command On Remote System sudo ifconfig ${src['dp_iface_name']} 0
517 ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
518 # Kill iperf on BNG
519 ${rg_output}= Run Keyword and Continue On Failure Login And Run Command On Remote System
520 ... sudo kill -9 `pidof iperf`
521 ... ${dst['bng_ip']} ${dst['bng_user']} ${dst['bng_pass']} ${dst['container_type']}
522 ... ${dst['container_name']}
523
524 # Setup RG for Multi-cast test
525 ${output}= Login And Run Command On Remote System
526 ... sudo ifconfig ${src['dp_iface_name']} ${src['mcast_rg']} up ; sudo kill -9 `pidof iperf`
527 ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
528 ${output}= Login And Run Command On Remote System
529 ... sudo ip route add ${src['mcast_grp_subnet_mask']} dev ${src['dp_iface_name']} scope link
530 ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
531
532 # Perform operations for adding subscriber
Suchitra Vemuria6879aa2020-11-03 11:03:11 -0800533 ${of_id}= Wait Until Keyword Succeeds ${timeout} 15s Validate OLT Device in ONOS ${src['olt']}
Suchitra Vemuri85cb7d62020-07-16 23:46:16 -0700534 Set Global Variable ${of_id}
535 ${nni_port}= Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s
536 ... Get NNI Port in ONOS ${of_id}
537 Set Global Variable ${nni_port}
538 ${onu_device_id}= Get Device ID From SN ${src['onu']}
539 ${onu_port}= Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s
Hardik Windlass1ed2eee2021-06-25 09:51:03 +0000540 ... Get ONU Port in ONOS ${src['onu']} ${of_id} ${src['uni_id']}
Suchitra Vemuri85cb7d62020-07-16 23:46:16 -0700541 # Check ONU port is Enabled in ONOS
542 Run Keyword And Continue On Failure Wait Until Keyword Succeeds 120s 2s
Hardik Windlass39015672021-07-05 05:48:08 +0000543 ... Verify UNI Port Is Enabled ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${src['onu']} ${src['uni_id']}
TorstenThiemea36068c2021-02-19 09:57:32 +0000544 Run Keyword Unless ${supress_add_subscriber}
545 ... Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2
TorstenThieme4e2168e2021-06-22 14:01:47 +0000546 ... Execute ONOS CLI Command use single connection ${ONOS_SSH_IP} ${ONOS_SSH_PORT}
Suchitra Vemuri85cb7d62020-07-16 23:46:16 -0700547 ... volt-add-subscriber-access ${of_id} ${onu_port}
TorstenThiemea36068c2021-02-19 09:57:32 +0000548 # Verify ONU state in voltha
Emrehan UZUNec59bea2021-05-27 13:45:57 +0000549 ${onu_reasons}= Create List omci-flows-pushed onu-reenabled
TorstenThiemea36068c2021-02-19 09:57:32 +0000550 # In case of previous dis- and enable of ONU and no further subscriber add actions state will be onu-reenabled
551 Run Keyword If ${supress_add_subscriber} Append To List ${onu_reasons} onu-reenabled
Suchitra Vemuri85cb7d62020-07-16 23:46:16 -0700552 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s Validate Device
553 ... ENABLED ACTIVE REACHABLE
Matteo Scandolo74bd5c32020-12-08 09:52:19 -0800554 ... ${src['onu']} onu=True onu_reason=${onu_reasons}
Suchitra Vemuri85cb7d62020-07-16 23:46:16 -0700555
556 # Setup iperf on the BNG
557 ${server_output}= Login And Run Command On Remote System
558 ... sudo iperf -c ${dst['dp_iface_ip_qinq']} -u -T 32 -t 60 -i 1 &
559 ... ${dst['bng_ip']} ${dst['bng_user']} ${dst['bng_pass']} ${dst['container_type']}
560 ... ${dst['container_name']}
561
562 # Setup iperf on the RG
563 ${rg_output}= Run Keyword and Continue On Failure Wait Until Keyword Succeeds 90s 5s
564 ... Login And Run Command On Remote System
565 ... rm -rf /tmp/rg_output ; sudo iperf -s -u -B ${dst['dp_iface_ip_qinq']} -i 1 -D >> /tmp/rg_output
566 ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
567 Log ${rg_output}
568 Sleep 60s
569 ${output}= Run Keyword and Continue On Failure Wait Until Keyword Succeeds 90s 5s
570 ... Login And Run Command On Remote System
571 ... cat /tmp/rg_output | grep KBytes
572 ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
573 Log ${output}
574 Should Contain ${output} KBytes
575
576 # Kill iperf on BNG
577 ${rg_output}= Run Keyword and Continue On Failure Login And Run Command On Remote System
578 ... sudo kill -9 `pidof iperf`
579 ... ${dst['bng_ip']} ${dst['bng_user']} ${dst['bng_pass']} ${dst['container_type']}
580 ... ${dst['container_name']}
581
582 # Kill iperf on the RG
583 ${output}= Run Keyword and Continue On Failure Login And Run Command On Remote System
584 ... sudo kill -9 `pidof iperf`
585 ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
586
Hardik Windlass62db9d92021-05-17 09:32:40 +0000587Setup Soak
588 [Documentation] Pre-test Setup for Soak Job
589 ${olt_ids} Create List
590 FOR ${I} IN RANGE 0 ${num_olts}
591 ${olt_serial_number}= Set Variable ${list_olts}[${I}][sn]
592 ${olt_device_id}= Get Device ID From SN ${olt_serial_number}
593 ${logical_id}= Get Logical Device ID From SN ${olt_serial_number}
594 ${of_id}= Wait Until Keyword Succeeds ${timeout} 15s Validate OLT Device in ONOS
595 ... ${olt_serial_number}
596 ${nni_port}= Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s
597 ... Get NNI Port in ONOS ${of_id}
598 Set Global Variable ${nni_port}
599 ${olt} Create Dictionary device_id ${olt_device_id} logical_id ${logical_id}
600 ... of_id ${of_id} sn ${olt_serial_number}
601 Append To List ${olt_ids} ${olt}
602 END
603 Set Global Variable ${olt_ids}
Suchitra Vemuri2f1e07d2020-06-26 19:18:01 -0700604
Gayathri.Selvanee4a91b2020-01-17 06:49:53 +0000605Setup
606 [Documentation] Pre-test Setup
Hardik Windlass4ed54502021-05-14 07:34:15 +0000607 [Arguments] ${skip_empty_device_list_test}=False
Gayathri.Selvanee4a91b2020-01-17 06:49:53 +0000608 #test for empty device list
Hardik Windlass4ed54502021-05-14 07:34:15 +0000609 Run Keyword If '${skip_empty_device_list_test}'=='False' Test Empty Device List
Hardik Windlass5e214b22021-02-26 10:37:14 +0000610 # TBD: Need for this Sleep
611 Run Keyword If ${has_dataplane} Sleep 180s
Suchitra Vemuria6879aa2020-11-03 11:03:11 -0800612 # Create a list of olt ids (logical and device_id)
613 ${olt_ids} Create List
614 FOR ${I} IN RANGE 0 ${num_olts}
615 #create/preprovision device
Andrea Campanella3dcce272021-01-15 16:04:47 +0100616 ${olt_device_id}= Run Keyword If "${list_olts}[${I}][type]" == "${None}"
Suchitra Vemuri09f878d2021-02-10 18:19:04 -0800617 ... Create Device ${list_olts}[${I}][ip] ${list_olts}[${I}][oltport]
618 ... ELSE Create Device ${list_olts}[${I}][ip] ${list_olts}[${I}][oltport] ${list_olts}[${I}][type]
Suchitra Vemuria6879aa2020-11-03 11:03:11 -0800619 ${olt_serial_number}= Set Variable ${list_olts}[${I}][sn]
620 #Set Suite Variable ${olt_device_id}
621 #validate olt states
622 Wait Until Keyword Succeeds ${timeout} 5s
Hardik Windlass8b446492021-06-10 06:25:23 +0000623 ... Validate OLT Device PREPROVISIONED UNKNOWN UNKNOWN ${olt_device_id} by_dev_id=True
Suchitra Vemuria6879aa2020-11-03 11:03:11 -0800624 Sleep 5s
625 Enable Device ${olt_device_id}
Suchitra Vemuricf6e89c2021-03-24 19:14:15 -0700626 # Increasing the timer to incorporate wait time for in-band
627 Wait Until Keyword Succeeds 540s 5s
Suchitra Vemuria6879aa2020-11-03 11:03:11 -0800628 ... Validate OLT Device ENABLED ACTIVE REACHABLE ${olt_serial_number}
629 ${logical_id}= Get Logical Device ID From SN ${olt_serial_number}
630 # Set Suite Variable ${logical_id}
631 ${of_id}= Wait Until Keyword Succeeds ${timeout} 15s Validate OLT Device in ONOS
632 ... ${olt_serial_number}
633 ${olt} Create Dictionary device_id ${olt_device_id} logical_id ${logical_id}
634 ... of_id ${of_id} sn ${olt_serial_number}
635 Append To List ${olt_ids} ${olt}
636 END
637 Set Global Variable ${olt_ids}
638
639Get ofID From OLT List
640 [Documentation] Retrieves the corresponding of_id for the OLT serial number specified
641 [Arguments] ${serial_number}
642 FOR ${I} IN RANGE 0 ${olt_count}
643 ${sn}= Get From Dictionary ${olt_ids}[${I}] sn
Andrea Campanella317a94c2020-11-13 10:38:19 +0100644 ${of_id}= Run Keyword IF "${serial_number}"=="${sn}"
645 ... Get From Dictionary ${olt_ids}[${I}] of_id ELSE Set Variable ${of_id}
Suchitra Vemuria6879aa2020-11-03 11:03:11 -0800646 END
647 [Return] ${of_id}
648
649Get OLTDeviceID From OLT List
650 [Documentation] Retrieves the corresponding olt_device_id for the OLT serial number specified
651 [Arguments] ${serial_number}
Suchitra Vemuri4b8f4f52020-11-17 19:12:50 -0800652 ${olt_device_id}= Set Variable 0
Suchitra Vemuria6879aa2020-11-03 11:03:11 -0800653 FOR ${I} IN RANGE 0 ${olt_count}
654 ${sn}= Get From Dictionary ${olt_ids}[${I}] sn
Andrea Campanella317a94c2020-11-13 10:38:19 +0100655 ${olt_device_id}= Run Keyword IF "${serial_number}"=="${sn}"
656 ... Get From Dictionary ${olt_ids}[${I}] device_id ELSE Set Variable ${olt_device_id}
Suchitra Vemuria6879aa2020-11-03 11:03:11 -0800657 END
658 [Return] ${olt_device_id}
Gayathri.Selvanee4a91b2020-01-17 06:49:53 +0000659
Andrea Campanellad848de02020-11-24 10:23:41 +0100660Get Num of Onus From OLT SN
661 [Documentation] Retrieves the corresponding number of ONUs for a given OLT based on serial number specified
662 [Arguments] ${serial_number}
663 ${num_of_olt_onus}= Set Variable 0
664 FOR ${I} IN RANGE 0 ${olt_count}
665 ${sn}= Get From Dictionary ${olt_ids}[${I}] sn
666 ${num_of_olt_onus}= Run Keyword IF "${serial_number}"=="${sn}"
667 ... Get From Dictionary ${list_olts}[${I}] onucount ELSE Set Variable ${num_of_olt_onus}
668 END
669 [Return] ${num_of_olt_onus}
670
Hardik Windlassaaea3402020-03-10 19:45:45 +0530671Validate ONUs After OLT Disable
672 [Documentation] Validates the ONUs state in Voltha, ONUs port state in ONOS
673 ... and that pings do not succeed After corresponding OLT is Disabled
Andrea Campanella4e507882020-11-26 11:33:11 +0100674 [Arguments] ${num_onus} ${olt_serial_number}
Hardik Windlassaaea3402020-03-10 19:45:45 +0530675 FOR ${I} IN RANGE 0 ${num_onus}
676 ${src}= Set Variable ${hosts.src[${I}]}
677 ${dst}= Set Variable ${hosts.dst[${I}]}
Andrea Campanella4e507882020-11-26 11:33:11 +0100678 Continue For Loop If "${olt_serial_number}"!="${src['olt']}"
Suchitra Vemuria6879aa2020-11-03 11:03:11 -0800679 ${of_id}= Get ofID From OLT List ${src['olt']}
Hardik Windlassaaea3402020-03-10 19:45:45 +0530680 ${onu_device_id}= Get Device ID From SN ${src['onu']}
681 ${onu_port}= Wait Until Keyword Succeeds ${timeout} 2s Get ONU Port in ONOS ${src['onu']}
682 ... ${of_id}
683 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
684 ... Validate Device ENABLED DISCOVERED
685 ... UNREACHABLE ${src['onu']} onu=True onu_reason=stopping-openomci
686 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s
Hardik Windlass39015672021-07-05 05:48:08 +0000687 ... Verify UNI Port Is Disabled ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${src['onu']}
Hardik Windlassaaea3402020-03-10 19:45:45 +0530688 Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure
689 ... Wait Until Keyword Succeeds 60s 2s
690 ... Check Ping False ${dst['dp_iface_ip_qinq']} ${src['dp_iface_name']}
691 ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
Hardik Windlassaaea3402020-03-10 19:45:45 +0530692 END
693
Gayathri.Selvanee4a91b2020-01-17 06:49:53 +0000694Delete All Devices and Verify
695 [Documentation] Remove any devices from VOLTHA and ONOS
696 # Clear devices from VOLTHA
697 Disable Devices In Voltha Root=true
698 Wait Until Keyword Succeeds ${timeout} 2s Test Devices Disabled In Voltha Root=true
699 Delete Devices In Voltha Root=true
700 Wait Until Keyword Succeeds ${timeout} 2s Test Empty Device List
Hardik Windlasse8b99222021-01-25 10:03:14 +0000701 FOR ${I} IN RANGE 0 ${num_olts}
702 ${olt_serial_number}= Set Variable ${list_olts}[${I}][sn]
TorstenThieme9bd8b9a2021-03-11 15:00:43 +0000703 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
Hardik Windlasse8b99222021-01-25 10:03:14 +0000704 ... Validate Deleted Device Cleanup In ONOS ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${olt_serial_number}
705 END
Gayathri.Selvanee4a91b2020-01-17 06:49:53 +0000706 # Clear devices from ONOS
Suchitra Vemurif7a033c2020-02-26 17:22:41 -0800707 #Remove All Devices From ONOS
ubuntu6b6e7d42020-03-02 12:35:42 -0800708 #... http://karaf:karaf@${ONOS_REST_IP}:${ONOS_REST_PORT}
Gayathri.Selvanee4a91b2020-01-17 06:49:53 +0000709
710Teardown
711 [Documentation] kills processes and cleans up interfaces on src+dst servers
712 Run Keyword If ${has_dataplane} Clean Up Linux
Gayathri.Selvanee4a91b2020-01-17 06:49:53 +0000713
714Teardown Suite
715 [Documentation] Clean up device if desired
716 Run Keyword If ${teardown_device} Delete All Devices and Verify
TorstenThieme4e2168e2021-06-22 14:01:47 +0000717 Close All ONOS SSH Connections
Gayathri.Selvanee4a91b2020-01-17 06:49:53 +0000718
719Delete Device and Verify
Suchitra Vemuria6879aa2020-11-03 11:03:11 -0800720 [Arguments] ${olt_serial_number}
Gayathri.Selvanee4a91b2020-01-17 06:49:53 +0000721 [Documentation] Disable -> Delete devices via voltctl and verify its removed
Suchitra Vemuri2fa9bba2020-01-22 17:38:48 -0800722 ${olt_device_id}= Get Device ID From SN ${olt_serial_number}
Gayathri.Selvanee4a91b2020-01-17 06:49:53 +0000723 ${rc} ${output}= Run and Return Rc and Output
Matteo Scandolo5899be12020-11-11 15:38:07 -0800724 ... voltctl -c ${VOLTCTL_CONFIG} device disable ${olt_device_id}
Gayathri.Selvanee4a91b2020-01-17 06:49:53 +0000725 Should Be Equal As Integers ${rc} 0
726 Sleep 5s
727 Wait Until Keyword Succeeds ${timeout} 5s
728 ... Validate OLT Device DISABLED UNKNOWN REACHABLE ${olt_serial_number}
729 ${rc} ${output}= Run and Return Rc and Output
Matteo Scandolo5899be12020-11-11 15:38:07 -0800730 ... voltctl -c ${VOLTCTL_CONFIG} device delete ${olt_device_id}
Hardik Windlassdf5035e2021-01-27 08:34:59 +0000731 Sleep 50s
Gayathri.Selvanee4a91b2020-01-17 06:49:53 +0000732 Should Be Equal As Integers ${rc} 0
733 Wait Until Keyword Succeeds ${timeout} 5s Validate Device Removed ${olt_device_id}
Hardik Windlasse8b99222021-01-25 10:03:14 +0000734 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 15s
735 ... Validate Deleted Device Cleanup In ONOS ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${olt_serial_number}
Gayathri.Selvanee4a91b2020-01-17 06:49:53 +0000736
Gayathri.Selvan283a63c2020-01-23 04:09:18 +0000737Repeat Sanity Test
738 [Documentation] This keyword performs Sanity Test Procedure
739 ... Sanity test performs authentication, dhcp and pings for all the ONUs given for the POD
740 ... This keyword can be used to call in any other tests where sanity check is required
741 ... with wpa reassociation
742 ${of_id}= Wait Until Keyword Succeeds ${timeout} 15s Validate OLT Device in ONOS ${olt_serial_number}
743 Set Global Variable ${of_id}
Suchitra Vemuria6879aa2020-11-03 11:03:11 -0800744 FOR ${I} IN RANGE 0 ${num_all_onus}
Gayathri.Selvan283a63c2020-01-23 04:09:18 +0000745 ${src}= Set Variable ${hosts.src[${I}]}
746 ${dst}= Set Variable ${hosts.dst[${I}]}
Suchitra Vemuri8078b972020-02-06 19:07:41 -0800747 ${onu_port}= Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s
748 ... Get ONU Port in ONOS ${src['onu']} ${of_id}
749 # Check ONU port is Enabled in ONOD
750 Run Keyword And Continue On Failure Wait Until Keyword Succeeds 120s 2s
Hardik Windlass39015672021-07-05 05:48:08 +0000751 ... Verify UNI Port Is Enabled ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${src['onu']}
Suchitra Vemuri8078b972020-02-06 19:07:41 -0800752 # Verify EAPOL flows are added for the ONU port
753 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s
David K. Bainbridgec0617c92020-03-05 21:17:19 -0800754 ... Verify Eapol Flows Added For ONU ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${onu_port}
Suchitra Vemuri8078b972020-02-06 19:07:41 -0800755 # Verify ONU state in voltha
Suchitra Vemurid1e27fb2020-02-01 16:34:37 -0800756 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s Validate Device
Suchitra Vemuri81e4f022020-02-01 13:16:02 -0800757 ... ENABLED ACTIVE REACHABLE
758 ... ${src['onu']} onu=True onu_reason=omci-flows-pushed
Suchitra Vemuri8078b972020-02-06 19:07:41 -0800759 # Perform Authentication
Gayathri.Selvan283a63c2020-01-23 04:09:18 +0000760 Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure
761 ... Validate Authentication After Reassociate
762 ... True ${src['dp_iface_name']} ${src['ip']} ${src['user']} ${src['pass']}
763 ... ${src['container_type']} ${src['container_name']}
764 Wait Until Keyword Succeeds ${timeout} 2s
David K. Bainbridgec0617c92020-03-05 21:17:19 -0800765 ... Verify ONU in AAA-Users ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${onu_port}
Gayathri.Selvan283a63c2020-01-23 04:09:18 +0000766 Wait Until Keyword Succeeds ${timeout} 2s
TorstenThieme4e2168e2021-06-22 14:01:47 +0000767 ... Execute ONOS CLI Command use single connection ${ONOS_SSH_IP} ${ONOS_SSH_PORT}
Gayathri.Selvan283a63c2020-01-23 04:09:18 +0000768 ... volt-add-subscriber-access ${of_id} ${onu_port}
769 Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure
770 ... Validate DHCP and Ping True True
771 ... ${src['dp_iface_name']} ${src['s_tag']} ${src['c_tag']} ${dst['dp_iface_ip_qinq']}
772 ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
773 ... ${dst['dp_iface_name']} ${dst['ip']} ${dst['user']} ${dst['pass']} ${dst['container_type']}
774 ... ${dst['container_name']}
775 Wait Until Keyword Succeeds ${timeout} 2s Run Keyword And Continue On Failure
David K. Bainbridgec0617c92020-03-05 21:17:19 -0800776 ... Validate Subscriber DHCP Allocation ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${onu_port}
Gayathri.Selvan283a63c2020-01-23 04:09:18 +0000777 END
Gayathri.Selvanb6a2b542020-01-24 07:24:23 +0000778
Hardik Windlass41701e82021-01-12 17:44:44 +0000779Disable Enable PON Port Per OLT
780 [Arguments] ${olt_serial_number}
781 [Documentation] This keyword disables and then enables OLT PON port and
782 ... also validate ONUs for each corresponding case
783 ${olt_device_id}= Get OLTDeviceID From OLT List ${olt_serial_number}
784 ${olt_pon_port_list}= Retrieve OLT PON Ports ${olt_device_id}
785 ${olt_pon_port_list_len}= Get Length ${olt_pon_port_list}
786 FOR ${INDEX0} IN RANGE 0 ${olt_pon_port_list_len}
787 ${olt_pon_port}= Get From List ${olt_pon_port_list} ${INDEX0}
788 ${olt_peer_list}= Retrieve Peer List From OLT PON Port ${olt_device_id} ${olt_pon_port}
789 # Disable the OLT PON Port and Validate OLT Device
790 DisableOrEnable OLT PON Port disable ${olt_device_id} ${olt_pon_port}
791 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
792 ... Validate OLT PON Port Status ${olt_device_id} ${olt_pon_port}
793 ... DISABLED DISCOVERED
794 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
795 ... Validate OLT Device ENABLED ACTIVE REACHABLE
796 ... ${olt_serial_number}
797 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
798 ... Validate ONUs for PON OLT Disable ${olt_serial_number} ${olt_peer_list}
799 # Enable the OLT PON Port back, and check ONU status are back to "ACTIVE"
800 DisableOrEnable OLT PON Port enable ${olt_device_id} ${olt_pon_port}
801 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
802 ... Validate OLT PON Port Status ${olt_device_id} ${olt_pon_port}
803 ... ENABLED ACTIVE
804 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
805 ... Validate ONUs for PON OLT Enable ${olt_serial_number} ${olt_peer_list}
806 END
807
Hardik Windlass16cdf962020-04-29 15:26:50 +0530808Validate ONUs for PON OLT Disable
Hardik Windlass41701e82021-01-12 17:44:44 +0000809 [Arguments] ${olt_sn} ${olt_peer_list}
Hardik Windlass16cdf962020-04-29 15:26:50 +0530810 [Documentation] This keyword validates that Ping fails for ONUs connected to Disabled OLT PON port
811 ... And Pings succeed for other Active OLT PON port ONUs
812 ... Also it removes subscriber for Disabled OLT PON port ONUs to replicate ATT workflow
Hardik Windlass41701e82021-01-12 17:44:44 +0000813 FOR ${I} IN RANGE 0 ${num_all_onus}
Hardik Windlass16cdf962020-04-29 15:26:50 +0530814 ${src}= Set Variable ${hosts.src[${I}]}
815 ${dst}= Set Variable ${hosts.dst[${I}]}
Hardik Windlass41701e82021-01-12 17:44:44 +0000816 Continue For Loop If "${olt_sn}"!="${src['olt']}"
Hardik Windlass16cdf962020-04-29 15:26:50 +0530817 ${onu_device_id}= Get Device ID From SN ${src['onu']}
Hardik Windlass41701e82021-01-12 17:44:44 +0000818 ${of_id}= Wait Until Keyword Succeeds ${timeout} 15s Validate OLT Device in ONOS ${src['olt']}
Hardik Windlass16cdf962020-04-29 15:26:50 +0530819 ${onu_port}= Wait Until Keyword Succeeds ${timeout} 2s Get ONU Port in ONOS ${src['onu']}
Hardik Windlass1ed2eee2021-06-25 09:51:03 +0000820 ... ${of_id} ${src['uni_id']}
Hardik Windlass16cdf962020-04-29 15:26:50 +0530821 ${matched}= Match ONU in PON OLT Peer List ${olt_peer_list} ${onu_device_id}
822 Run Keyword If ${matched}
823 ... Run Keywords
824 ... Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
825 ... Validate Device ENABLED DISCOVERED
Hardik Windlass41701e82021-01-12 17:44:44 +0000826 ... UNREACHABLE ${src['onu']} onu=True onu_reason=omci-flows-deleted
Hardik Windlass16cdf962020-04-29 15:26:50 +0530827 ... AND Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s
Hardik Windlass39015672021-07-05 05:48:08 +0000828 ... Verify UNI Port Is Disabled ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${src['onu']} ${src['uni_id']}
Hardik Windlass16cdf962020-04-29 15:26:50 +0530829 ... AND Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure
830 ... Wait Until Keyword Succeeds 60s 2s
831 ... Check Ping False ${dst['dp_iface_ip_qinq']} ${src['dp_iface_name']}
832 ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']}
833 ... ${src['container_name']}
834 # Remove Subscriber Access (To replicate ATT workflow)
TorstenThieme4e2168e2021-06-22 14:01:47 +0000835 ... AND Wait Until Keyword Succeeds ${timeout} 2s Execute ONOS CLI Command use single connection
836 ... ${ONOS_SSH_IP} ${ONOS_SSH_PORT} volt-remove-subscriber-access ${of_id} ${onu_port}
Hardik Windlass223a1732021-07-09 05:21:40 +0000837 # Additional Sleep to let subscriber delete process
838 ... AND Sleep 5s
Hardik Windlass16cdf962020-04-29 15:26:50 +0530839 ... ELSE
840 ... Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure
841 ... Wait Until Keyword Succeeds 60s 2s
842 ... Check Ping True ${dst['dp_iface_ip_qinq']} ${src['dp_iface_name']}
843 ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']}
844 ... ${src['container_name']}
Hardik Windlass16cdf962020-04-29 15:26:50 +0530845 END
846
847Validate ONUs for PON OLT Enable
Hardik Windlass41701e82021-01-12 17:44:44 +0000848 [Arguments] ${olt_sn} ${olt_peer_list}
Hardik Windlass16cdf962020-04-29 15:26:50 +0530849 [Documentation] This keyword validates Ping succeeds for all Enabled/Acitve OLT PON ports
850 ... Also performs Auth/subscriberAdd/DHCP/Ping for the ONUs on Re-Enabled OLT PON port
Suchitra Vemuria6879aa2020-11-03 11:03:11 -0800851 FOR ${I} IN RANGE 0 ${num_all_onus}
Hardik Windlass16cdf962020-04-29 15:26:50 +0530852 ${src}= Set Variable ${hosts.src[${I}]}
853 ${dst}= Set Variable ${hosts.dst[${I}]}
Hardik Windlass41701e82021-01-12 17:44:44 +0000854 Continue For Loop If "${olt_sn}"!="${src['olt']}"
Hardik Windlass16cdf962020-04-29 15:26:50 +0530855 ${onu_device_id}= Get Device ID From SN ${src['onu']}
Hardik Windlass41701e82021-01-12 17:44:44 +0000856 ${of_id}= Wait Until Keyword Succeeds ${timeout} 15s Validate OLT Device in ONOS ${src['olt']}
Hardik Windlass16cdf962020-04-29 15:26:50 +0530857 ${onu_port}= Wait Until Keyword Succeeds ${timeout} 2s Get ONU Port in ONOS ${src['onu']}
Hardik Windlass1ed2eee2021-06-25 09:51:03 +0000858 ... ${of_id} ${src['uni_id']}
Hardik Windlass16cdf962020-04-29 15:26:50 +0530859 ${matched}= Match ONU in PON OLT Peer List ${olt_peer_list} ${onu_device_id}
860 ${wpa_log}= Run Keyword If ${has_dataplane} and ${matched} Catenate SEPARATOR=.
861 ... /tmp/wpa ${src['dp_iface_name']} log
862 Run Keyword If ${matched}
863 ... Run Keywords
864 # Perform Cleanup
865 ... Run Keyword If ${has_dataplane} Clean Up Linux ${onu_device_id}
866 # Verify ONU port status
867 ... AND Run Keyword And Continue On Failure Wait Until Keyword Succeeds 120s 2s
Hardik Windlass39015672021-07-05 05:48:08 +0000868 ... Verify UNI Port Is Enabled ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${src['onu']} ${src['uni_id']}
Hardik Windlass16cdf962020-04-29 15:26:50 +0530869 # Verify EAPOL flows are added for the ONU port
870 ... AND Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s
871 ... Verify Eapol Flows Added For ONU ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${onu_port}
872 # Verify ONU state in voltha
873 ... AND Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
874 ... Validate Device ENABLED ACTIVE REACHABLE
875 ... ${src['onu']} onu=True onu_reason=omci-flows-pushed
876 # Perform Authentication
877 ... AND Run Keyword If ${has_dataplane}
878 ... Run Keyword And Continue On Failure Validate Authentication True
879 ... ${src['dp_iface_name']} wpa_supplicant.conf ${src['ip']} ${src['user']} ${src['pass']}
880 ... ${src['container_type']} ${src['container_name']} ${wpa_log}
881 ... AND Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2
882 ... Verify ONU in AAA-Users ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${onu_port}
883 ... AND Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2
TorstenThieme4e2168e2021-06-22 14:01:47 +0000884 ... Execute ONOS CLI Command use single connection ${ONOS_SSH_IP} ${ONOS_SSH_PORT}
Hardik Windlass16cdf962020-04-29 15:26:50 +0530885 ... volt-add-subscriber-access ${of_id} ${onu_port}
886 # Verify that no pending flows exist for the ONU port
887 ... AND Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s
888 ... Verify No Pending Flows For ONU ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${onu_port}
889 # Verify subscriber access flows are added for the ONU port
890 ... AND Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
891 ... Verify Subscriber Access Flows Added For ONU ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${of_id}
892 ... ${onu_port} ${nni_port} ${src['c_tag']} ${src['s_tag']}
893 ... AND Run Keyword If ${has_dataplane}
894 ... Run Keyword And Continue On Failure Validate DHCP and Ping True
895 ... True ${src['dp_iface_name']} ${src['s_tag']} ${src['c_tag']} ${dst['dp_iface_ip_qinq']}
896 ... ${src['ip']} ${src['user']} ${src['pass']}
897 ... ${src['container_type']} ${src['container_name']}
898 ... ${dst['dp_iface_name']} ${dst['ip']} ${dst['user']} ${dst['pass']}
899 ... ${dst['container_type']} ${dst['container_name']}
900 ... AND Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s
901 ... Validate Subscriber DHCP Allocation ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${onu_port}
902 ... AND Run Keyword and Ignore Error Get Device Output from Voltha ${onu_device_id}
903 ... ELSE
904 ... Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure
905 ... Wait Until Keyword Succeeds 60s 2s
906 ... Check Ping True ${dst['dp_iface_ip_qinq']} ${src['dp_iface_name']}
907 ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']}
908 ... ${src['container_name']}
Hardik Windlass16cdf962020-04-29 15:26:50 +0530909 END
910
Hardik Windlass41701e82021-01-12 17:44:44 +0000911Disable Enable PON Port Per OLT DT
912 [Arguments] ${olt_serial_number}
913 [Documentation] This keyword disables and then enables OLT PON port and
914 ... also validate ONUs for each corresponding case
915 ${olt_device_id}= Get OLTDeviceID From OLT List ${olt_serial_number}
916 ${olt_pon_port_list}= Retrieve OLT PON Ports ${olt_device_id}
917 ${olt_pon_port_list_len}= Get Length ${olt_pon_port_list}
918 FOR ${INDEX0} IN RANGE 0 ${olt_pon_port_list_len}
919 ${olt_pon_port}= Get From List ${olt_pon_port_list} ${INDEX0}
920 ${olt_peer_list}= Retrieve Peer List From OLT PON Port ${olt_device_id} ${olt_pon_port}
921 # Disable the OLT PON Port and Validate OLT Device
922 DisableOrEnable OLT PON Port disable ${olt_device_id} ${olt_pon_port}
923 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
924 ... Validate OLT PON Port Status ${olt_device_id} ${olt_pon_port}
925 ... DISABLED DISCOVERED
926 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
927 ... Validate OLT Device ENABLED ACTIVE REACHABLE
928 ... ${olt_serial_number}
929 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
930 ... Validate ONUs for PON OLT Disable DT ${olt_serial_number} ${olt_peer_list}
Hardik Windlass41701e82021-01-12 17:44:44 +0000931 # Enable the OLT PON Port back, and check ONU status are back to "ACTIVE"
932 DisableOrEnable OLT PON Port enable ${olt_device_id} ${olt_pon_port}
933 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
934 ... Validate OLT PON Port Status ${olt_device_id} ${olt_pon_port}
935 ... ENABLED ACTIVE
936 # Waiting extra time for the ONUs to come up
Hardik Windlass5e214b22021-02-26 10:37:14 +0000937 Sleep 30s
Hardik Windlass41701e82021-01-12 17:44:44 +0000938 ${olt_peer_list_new}= Retrieve Peer List From OLT PON Port ${olt_device_id} ${olt_pon_port}
939 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
940 ... Validate ONUs for PON OLT Enable DT ${olt_serial_number} ${olt_peer_list_new}
941 END
942
Hardik Windlass16cdf962020-04-29 15:26:50 +0530943Validate ONUs for PON OLT Disable DT
Hardik Windlass41701e82021-01-12 17:44:44 +0000944 [Arguments] ${olt_sn} ${olt_peer_list}
Hardik Windlass16cdf962020-04-29 15:26:50 +0530945 [Documentation] This keyword validates that Ping fails for ONUs connected to Disabled OLT PON port
946 ... And Pings succeed for other Active OLT PON port ONUs
947 ... Also it removes subscriber and deletes ONUs for Disabled OLT PON port to replicate DT workflow
Suchitra Vemuria6879aa2020-11-03 11:03:11 -0800948 FOR ${I} IN RANGE 0 ${num_all_onus}
Hardik Windlass16cdf962020-04-29 15:26:50 +0530949 ${src}= Set Variable ${hosts.src[${I}]}
950 ${dst}= Set Variable ${hosts.dst[${I}]}
Hardik Windlass41701e82021-01-12 17:44:44 +0000951 Continue For Loop If "${olt_sn}"!="${src['olt']}"
Hardik Windlass16cdf962020-04-29 15:26:50 +0530952 ${onu_device_id}= Get Device ID From SN ${src['onu']}
Hardik Windlass41701e82021-01-12 17:44:44 +0000953 ${of_id}= Wait Until Keyword Succeeds ${timeout} 15s Validate OLT Device in ONOS ${src['olt']}
Hardik Windlass16cdf962020-04-29 15:26:50 +0530954 ${onu_port}= Wait Until Keyword Succeeds ${timeout} 2s Get ONU Port in ONOS ${src['onu']}
955 ... ${of_id}
956 ${matched}= Match ONU in PON OLT Peer List ${olt_peer_list} ${onu_device_id}
957 Run Keyword If ${matched}
958 ... Run Keywords
959 ... Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
960 ... Validate Device ENABLED DISCOVERED
961 ... UNREACHABLE ${src['onu']} onu=True onu_reason=stopping-openomci
962 ... AND Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s
Hardik Windlass39015672021-07-05 05:48:08 +0000963 ... Verify UNI Port Is Disabled ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${src['onu']}
Hardik Windlass16cdf962020-04-29 15:26:50 +0530964 ... AND Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure
965 ... Wait Until Keyword Succeeds 60s 2s
966 ... Check Ping False ${dst['dp_iface_ip_qinq']} ${src['dp_iface_name']}
967 ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']}
968 ... ${src['container_name']}
969 # Remove Subscriber Access (To replicate DT workflow)
TorstenThieme4e2168e2021-06-22 14:01:47 +0000970 ... AND Wait Until Keyword Succeeds ${timeout} 2s Execute ONOS CLI Command use single connection
971 ... ${ONOS_SSH_IP} ${ONOS_SSH_PORT} volt-remove-subscriber-access ${of_id} ${onu_port}
Hardik Windlass16cdf962020-04-29 15:26:50 +0530972 # Delete ONU Device (To replicate DT workflow)
973 ... AND Delete Device ${onu_device_id}
Hardik Windlass223a1732021-07-09 05:21:40 +0000974 # Additional Sleep to let subscriber and ONU delete process
975 ... AND Sleep 10s
Hardik Windlass16cdf962020-04-29 15:26:50 +0530976 ... ELSE
977 ... Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure
978 ... Wait Until Keyword Succeeds 60s 2s
979 ... Check Ping True ${dst['dp_iface_ip_qinq']} ${src['dp_iface_name']}
980 ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']}
981 ... ${src['container_name']}
Hardik Windlass16cdf962020-04-29 15:26:50 +0530982 END
983
984Validate ONUs for PON OLT Enable DT
Hardik Windlass41701e82021-01-12 17:44:44 +0000985 [Arguments] ${olt_sn} ${olt_peer_list}
Hardik Windlass16cdf962020-04-29 15:26:50 +0530986 [Documentation] This keyword validates Ping succeeds for all Enabled/Acitve OLT PON ports
987 ... Also performs subscriberAdd/DHCP/Ping for the ONUs on Re-Enabled OLT PON port
Suchitra Vemuria6879aa2020-11-03 11:03:11 -0800988 FOR ${I} IN RANGE 0 ${num_all_onus}
Hardik Windlass16cdf962020-04-29 15:26:50 +0530989 ${src}= Set Variable ${hosts.src[${I}]}
990 ${dst}= Set Variable ${hosts.dst[${I}]}
Hardik Windlass41701e82021-01-12 17:44:44 +0000991 Continue For Loop If "${olt_sn}"!="${src['olt']}"
Hardik Windlass16cdf962020-04-29 15:26:50 +0530992 ${onu_device_id}= Get Device ID From SN ${src['onu']}
Hardik Windlass41701e82021-01-12 17:44:44 +0000993 ${of_id}= Wait Until Keyword Succeeds ${timeout} 15s Validate OLT Device in ONOS ${src['olt']}
Hardik Windlass16cdf962020-04-29 15:26:50 +0530994 ${onu_port}= Wait Until Keyword Succeeds ${timeout} 2s Get ONU Port in ONOS ${src['onu']}
995 ... ${of_id}
996 ${matched}= Match ONU in PON OLT Peer List ${olt_peer_list} ${onu_device_id}
997 Run Keyword If ${matched}
998 ... Run Keywords
999 # Perform Cleanup
1000 ... Run Keyword If ${has_dataplane} Clean Up Linux ${onu_device_id}
1001 # Verify ONU port status
1002 ... AND Run Keyword And Continue On Failure Wait Until Keyword Succeeds 120s 2s
Hardik Windlass39015672021-07-05 05:48:08 +00001003 ... Verify UNI Port Is Enabled ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${src['onu']}
Hardik Windlass16cdf962020-04-29 15:26:50 +05301004 ... AND Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2
TorstenThieme4e2168e2021-06-22 14:01:47 +00001005 ... Execute ONOS CLI Command use single connection ${ONOS_SSH_IP} ${ONOS_SSH_PORT}
Hardik Windlass16cdf962020-04-29 15:26:50 +05301006 ... volt-add-subscriber-access ${of_id} ${onu_port}
1007 # Verify ONU state in voltha
1008 ... AND Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
1009 ... Validate Device ENABLED ACTIVE REACHABLE
1010 ... ${src['onu']} onu=True onu_reason=omci-flows-pushed
1011 # Verify subscriber access flows are added for the ONU port
1012 ... AND Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
1013 ... Verify Subscriber Access Flows Added For ONU DT ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${of_id}
1014 ... ${onu_port} ${nni_port} ${src['s_tag']}
1015 ... AND Run Keyword If ${has_dataplane}
1016 ... Run Keyword And Continue On Failure Validate DHCP and Ping True
1017 ... True ${src['dp_iface_name']} ${src['s_tag']} ${src['c_tag']} ${dst['dp_iface_ip_qinq']}
1018 ... ${src['ip']} ${src['user']} ${src['pass']}
1019 ... ${src['container_type']} ${src['container_name']}
1020 ... ${dst['dp_iface_name']} ${dst['ip']} ${dst['user']} ${dst['pass']}
1021 ... ${dst['container_type']} ${dst['container_name']}
1022 ... ELSE
1023 ... Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure
1024 ... Wait Until Keyword Succeeds 60s 2s
1025 ... Check Ping True ${dst['dp_iface_ip_qinq']} ${src['dp_iface_name']}
1026 ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']}
1027 ... ${src['container_name']}
Hardik Windlass16cdf962020-04-29 15:26:50 +05301028 END
1029
1030Match ONU in PON OLT Peer List
1031 [Arguments] ${olt_peer_list} ${onu_device_id}
1032 [Documentation] This keyword matches if ONU device is present in OLT PON port peer list
1033 ${matched}= Set Variable False
1034 FOR ${olt_peer} IN @{olt_peer_list}
1035 ${matched}= Set Variable If '${onu_device_id}' == '${olt_peer}' True False
1036 Exit For Loop If ${matched}
1037 END
1038 [Return] ${matched}
1039
Gayathri.Selvanb6a2b542020-01-24 07:24:23 +00001040Collect Logs
1041 [Documentation] Collect Logs from voltha and onos cli for various commands
1042 Run Keyword and Ignore Error Get Device List from Voltha
Suchitra Vemuria6879aa2020-11-03 11:03:11 -08001043 FOR ${I} IN RANGE 0 ${num_olts}
Suchitra Vemuria6879aa2020-11-03 11:03:11 -08001044 Run Keyword and Ignore Error Get Device Output from Voltha ${olt_ids}[${I}][device_id]
1045 Run Keyword and Ignore Error Get Logical Device Output from Voltha ${olt_ids}[${I}][logical_id]
1046 END
1047 #Run Keyword and Ignore Error Get Device Output from Voltha ${olt_device_id}
1048 #Run Keyword and Ignore Error Get Logical Device Output from Voltha ${logical_id}
ubuntu6b6e7d42020-03-02 12:35:42 -08001049 Get ONOS Status ${ONOS_SSH_IP} ${ONOS_SSH_PORT}
Gayathri.Selvanf68ea4b2020-02-03 07:36:39 +00001050
1051Verify ping is succesful except for given device
1052 [Arguments] ${num_onus} ${exceptional_onu_id}
1053 [Documentation] Checks that ping for all the devices are successful except the given ONU.
1054 ${pingStatus} Set Variable True
Suchitra Vemuria6879aa2020-11-03 11:03:11 -08001055 FOR ${I} IN RANGE 0 ${num_all_onus}
Gayathri.Selvanf68ea4b2020-02-03 07:36:39 +00001056 ${src}= Set Variable ${hosts.src[${I}]}
1057 ${dst}= Set Variable ${hosts.dst[${I}]}
1058 ${onu_device_id}= Get Device ID From SN ${src['onu']}
1059 ${pingStatus} Run Keyword If '${onu_device_id}' == '${exceptional_onu_id}' Set Variable False
Suchitra Vemuri69bcad22020-12-09 11:11:14 -08001060 Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure
1061 ... Wait Until Keyword Succeeds 60s 2s
Gayathri.Selvanf68ea4b2020-02-03 07:36:39 +00001062 ... Check Ping ${pingStatus} ${dst['dp_iface_ip_qinq']} ${src['dp_iface_name']}
1063 ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
1064 END
Andy Bavier4a8450e2020-02-04 08:58:37 -07001065
Suchitra Vemurife309412020-12-01 19:19:52 -08001066Verify ping is successful for ONUs not on this OLT
1067 [Arguments] ${num_all_onus} ${exceptional_olt_id}
1068 [Documentation] Checks that pings work for all the ONUs except for the ONUs on the given OLT.
1069 #${pingStatus} Set Variable True
1070 FOR ${I} IN RANGE 0 ${num_all_onus}
1071 ${src}= Set Variable ${hosts.src[${I}]}
1072 ${dst}= Set Variable ${hosts.dst[${I}]}
1073 ${olt_device_id}= Get Device ID From SN ${src['olt']}
1074 Continue For Loop If "${olt_device_id}"=="${exceptional_olt_id}"
1075 #${pingStatus} Run Keyword If '${olt_device_id}' == '${exceptional_olt_id}' Set Variable False
Suchitra Vemuri69bcad22020-12-09 11:11:14 -08001076 Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure
1077 ... Wait Until Keyword Succeeds 60s 2s
Suchitra Vemurife309412020-12-01 19:19:52 -08001078 ... Check Ping True ${dst['dp_iface_ip_qinq']} ${src['dp_iface_name']}
1079 ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
1080 END
1081
Andy Bavier1923ecc2020-06-18 14:06:40 -07001082Echo Message to OLT Logs
1083 [Arguments] ${message}
1084 [Documentation] Echoes ${message} into the OLT logs
Suchitra Vemuria6879aa2020-11-03 11:03:11 -08001085 FOR ${I} IN RANGE 0 ${num_olts}
1086 ${olt_user} Evaluate ${olts}[${I}].get("user")
1087 ${olt_pass} Evaluate ${olts}[${I}].get("pass")
1088 ${olt_ssh_ip} Evaluate ${olts}[${I}].get("sship")
Andrea Campanellaebf6f0d2021-01-12 13:10:29 +01001089 Continue For Loop If "${olt_user}" == "${None}"
1090 Continue For Loop If "${olt_pass}" == "${None}"
Suchitra Vemuria6879aa2020-11-03 11:03:11 -08001091 Wait Until Keyword Succeeds 180s 10s Execute Remote Command
1092 ... printf '%s\n' '' '' '${message}' '' >> /var/log/openolt.log
1093 ... ${olt_ssh_ip} ${olt_user} ${olt_pass}
1094 Wait Until Keyword Succeeds 180s 10s Execute Remote Command
1095 ... printf '%s\n' '' '' '${message}' '' >> /var/log/dev_mgmt_daemon.log
1096 ... ${olt_ssh_ip} ${olt_user} ${olt_pass}
1097 Wait Until Keyword Succeeds 180s 10s Execute Remote Command
1098 ... printf '%s\n' '' '' '${message}' '' >> /var/log/openolt_process_watchdog.log
1099 ... ${olt_ssh_ip} ${olt_user} ${olt_pass}
1100 END
Andy Bavier1923ecc2020-06-18 14:06:40 -07001101
Andy Bavierabeba262020-02-07 16:22:16 -07001102Start Logging
1103 [Arguments] ${label}
1104 [Documentation] Start logging for test ${label}
1105 ${kail_process}= Run Keyword If "${container_log_dir}" != "${None}" Start Process kail -n default
Andrea Campanella51124472021-07-27 10:40:35 +02001106 ... -n voltha -n infra cwd=${container_log_dir} stdout=${label}-combined.log
Andy Bavierabeba262020-02-07 16:22:16 -07001107 Set Test Variable ${kail_process}
Andy Bavier1923ecc2020-06-18 14:06:40 -07001108 Run Keyword If ${has_dataplane} Echo Message to OLT Logs START ${label}
Andy Bavierabeba262020-02-07 16:22:16 -07001109
1110Stop Logging
1111 [Arguments] ${label}
Matteo Scandoloda1c64b2021-07-20 10:14:49 -07001112 [Documentation] End logging for test; remove logfile if test passed and ${logging} is set to False
Andy Bavierabeba262020-02-07 16:22:16 -07001113 Run sync
1114 Run Keyword If ${kail_process} Terminate Process ${kail_process}
1115 ${test_logfile}= Run Keyword If "${container_log_dir}" != "${None}"
1116 ... Join Path ${container_log_dir} ${label}-combined.log
Matteo Scandoloda1c64b2021-07-20 10:14:49 -07001117 Run Keyword If Test Passed
1118 ... Run Keyword If "${logging}" == "False"
1119 ... Run Keyword If "${test_logfile}" != "${None}"
1120 ... Remove File ${test_logfile}
Andy Bavier1923ecc2020-06-18 14:06:40 -07001121 Run Keyword If ${has_dataplane} Echo Message to OLT Logs END ${label}
Andy Bavierabeba262020-02-07 16:22:16 -07001122
Suchitra Vemuria5fa3dd2020-02-04 14:38:49 -08001123Clean Up Linux
1124 [Documentation] Kill processes and clean up interfaces on src+dst servers
Hardik Windlass16cdf962020-04-29 15:26:50 +05301125 [Arguments] ${onu_id}=${EMPTY}
Suchitra Vemuria6879aa2020-11-03 11:03:11 -08001126 FOR ${I} IN RANGE 0 ${num_all_onus}
Suchitra Vemuria5fa3dd2020-02-04 14:38:49 -08001127 ${src}= Set Variable ${hosts.src[${I}]}
1128 ${dst}= Set Variable ${hosts.dst[${I}]}
Hardik Windlass16cdf962020-04-29 15:26:50 +05301129 ${onu_device_id}= Get Device ID From SN ${src['onu']}
1130 Continue For Loop If '${onu_id}' != '${EMPTY}' and '${onu_id}' != '${onu_device_id}'
Andy Bavier84b83282020-06-30 05:47:49 -07001131 Execute Remote Command sudo pkill wpa_supplicant ${src['ip']}
Suchitra Vemuria5fa3dd2020-02-04 14:38:49 -08001132 ... ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
Andy Bavier84b83282020-06-30 05:47:49 -07001133 Execute Remote Command sudo pkill dhclient ${src['ip']}
Suchitra Vemuria5fa3dd2020-02-04 14:38:49 -08001134 ... ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
Andy Baviereff938d2020-06-29 18:27:49 -07001135 Execute Remote Command sudo pkill mausezahn ${src['ip']}
1136 ... ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
1137 Run Keyword If '${dst['ip']}' != '${None}' Execute Remote Command pkill dhcpd
1138 ... ${dst['ip']} ${dst['user']} ${dst['pass']} ${dst['container_type']} ${dst['container_name']}
Suchitra Vemuria5fa3dd2020-02-04 14:38:49 -08001139 Delete IP Addresses from Interface on Remote Host ${src['dp_iface_name']} ${src['ip']}
1140 ... ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
1141 Run Keyword If '${dst['ip']}' != '${None}' Delete Interface on Remote Host
1142 ... ${dst['dp_iface_name']}.${src['s_tag']} ${dst['ip']} ${dst['user']} ${dst['pass']}
1143 ... ${dst['container_type']} ${dst['container_name']}
Andy Bavier84b83282020-06-30 05:47:49 -07001144 ${bng_ip}= Get Variable Value ${dst['noroot_ip']}
1145 ${bng_user}= Get Variable Value ${dst['noroot_user']}
1146 ${bng_pass}= Get Variable Value ${dst['noroot_pass']}
Andy Bavierf4b7d1d2020-06-30 11:14:04 -07001147 Run Keyword If "${bng_ip}" != "${NONE}" and "${bng_user}" != "${NONE}" and "${bng_pass}" != "${NONE}"
1148 ... Execute Remote Command sudo pkill mausezahn ${bng_ip} ${bng_user} ${bng_pass}
Andy Baviereff938d2020-06-29 18:27:49 -07001149 ... ${dst['container_type']} ${dst['container_name']}
Suchitra Vemuria5fa3dd2020-02-04 14:38:49 -08001150 END
Scott Baker60e570d2020-02-02 22:10:13 -08001151
Suchitra Vemuria6879aa2020-11-03 11:03:11 -08001152Clean Up Linux Per OLT
1153 [Documentation] Kill processes and clean up interfaces on src+dst servers
1154 [Arguments] ${olt_serial_number}
1155 FOR ${I} IN RANGE 0 ${num_all_onus}
1156 ${src}= Set Variable ${hosts.src[${I}]}
1157 ${dst}= Set Variable ${hosts.dst[${I}]}
1158 ${onu_device_id}= Get Device ID From SN ${src['onu']}
1159 ${sn}= Get Device ID From SN ${src['olt']}
1160 #Continue For Loop If '${onu_id}' != '${EMPTY}' and '${onu_id}' != '${onu_device_id}'
1161 Continue For Loop If '${olt_serial_number}' == '${sn}'
1162 Execute Remote Command sudo pkill wpa_supplicant ${src['ip']}
1163 ... ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
1164 Execute Remote Command sudo pkill dhclient ${src['ip']}
1165 ... ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
1166 Execute Remote Command sudo pkill mausezahn ${src['ip']}
1167 ... ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
1168 Run Keyword If '${dst['ip']}' != '${None}' Execute Remote Command pkill dhcpd
1169 ... ${dst['ip']} ${dst['user']} ${dst['pass']} ${dst['container_type']} ${dst['container_name']}
1170 Delete IP Addresses from Interface on Remote Host ${src['dp_iface_name']} ${src['ip']}
1171 ... ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
1172 Run Keyword If '${dst['ip']}' != '${None}' Delete Interface on Remote Host
1173 ... ${dst['dp_iface_name']}.${src['s_tag']} ${dst['ip']} ${dst['user']} ${dst['pass']}
1174 ... ${dst['container_type']} ${dst['container_name']}
1175 ${bng_ip}= Get Variable Value ${dst['noroot_ip']}
1176 ${bng_user}= Get Variable Value ${dst['noroot_user']}
1177 ${bng_pass}= Get Variable Value ${dst['noroot_pass']}
1178 Run Keyword If "${bng_ip}" != "${NONE}" and "${bng_user}" != "${NONE}" and "${bng_pass}" != "${NONE}"
1179 ... Execute Remote Command sudo pkill mausezahn ${bng_ip} ${bng_user} ${bng_pass}
1180 ... ${dst['container_type']} ${dst['container_name']}
1181 END
1182
Suchitra Vemuri8d3b0032020-09-11 17:49:08 -07001183Clean dhclient
1184 [Documentation] Kills dhclient processes only for all RGs
Hardik Windlass41701e82021-01-12 17:44:44 +00001185 FOR ${I} IN RANGE 0 ${num_all_onus}
Suchitra Vemuri8d3b0032020-09-11 17:49:08 -07001186 ${src}= Set Variable ${hosts.src[${I}]}
1187 ${dst}= Set Variable ${hosts.dst[${I}]}
1188 Execute Remote Command sudo pkill dhclient ${src['ip']}
1189 ... ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
1190 END
1191
Suchitra Vemurif7a033c2020-02-26 17:22:41 -08001192Clean WPA Process
1193 [Documentation] Kills wpa_supplicant processes only for all RGs
Suchitra Vemuria6879aa2020-11-03 11:03:11 -08001194 FOR ${I} IN RANGE 0 ${num_all_onus}
Suchitra Vemurif7a033c2020-02-26 17:22:41 -08001195 ${src}= Set Variable ${hosts.src[${I}]}
1196 ${dst}= Set Variable ${hosts.dst[${I}]}
1197 Run Keyword And Ignore Error Kill Linux Process [w]pa_supplicant ${src['ip']}
1198 ... ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
1199 END
1200
Scott Baker60e570d2020-02-02 22:10:13 -08001201Should Be Larger Than
1202 [Documentation] Verify that value_1 is > value_2
1203 [Arguments] ${value_1} ${value_2}
1204 Run Keyword If ${value_1} <= ${value_2}
1205 ... Fail The value ${value_1} is not larger than ${value_2}
1206
Scott Bakeree675552020-02-11 10:43:34 -08001207Should Be Larger Than Or Equal To
1208 [Documentation] Verify that value_1 is >= value_2
1209 [Arguments] ${value_1} ${value_2}
1210 Run Keyword If ${value_1} < ${value_2}
1211 ... Fail The value ${value_1} is not larger than or equal to ${value_2}
1212
Scott Baker60e570d2020-02-02 22:10:13 -08001213Should Be Float
1214 [Documentation] Verify that value is a floating point number type
1215 [Arguments] ${value}
1216 ${type} Evaluate type(${value}).__name__
1217 Should Be Equal ${type} float
1218
Scott Bakeree675552020-02-11 10:43:34 -08001219Should Be Newer Than Or Equal To
1220 [Documentation] Compare two RFC3339 dates
1221 [Arguments] ${value_1} ${value_2}
1222 ${unix_v1} Parse RFC3339 ${value_1}
1223 ${unix_v2} Parse RFC3339 ${value_2}
1224 Run Keyword If ${unix_v1} < ${unix_v2}
1225 ... Fail The value ${value_1} is not newer than or equal to ${value_2}
1226
Scott Baker60e570d2020-02-02 22:10:13 -08001227Get Current Time
1228 [Documentation] Return the current time in RFC3339 format
1229 ${output}= Run date -u +"%FT%T%:z"
1230 [return] ${output}
Scott Bakeree675552020-02-11 10:43:34 -08001231
1232Parse RFC3339
1233 [Documentation] Parse an RFC3339 timestamp
1234 [Arguments] ${dateStr}
1235 ${rc} ${output}= Run and Return Rc and Output date --date="${dateStr}" "+%s"
1236 Should Be Equal As Numbers ${rc} 0
1237 [return] ${output}
Matteo Scandolo142e6272020-04-29 17:36:59 -07001238
Gayathri.Selvan92d16862020-03-19 14:47:58 +00001239Get Bandwidth Profile Name For Given Subscriber
Hardik Windlass35db2aa2021-06-03 12:41:26 +00001240 [Arguments] ${subscriber_id} ${stream_type}=upstreamBandwidthProfile ${service_type}=${EMPTY}
Gayathri.Selvan92d16862020-03-19 14:47:58 +00001241 [Documentation] Keyword to get the bandwidth details of the given subscriber
Hardik Windlass35db2aa2021-06-03 12:41:26 +00001242 ${service_type_upper}= Run Keyword If '${service_type}' != '${EMPTY}'
1243 ... Convert To Upper Case ${service_type}
1244 ${bandwidth_profile_output}= Run Keyword If '${service_type}' != '${EMPTY}'
TorstenThieme4e2168e2021-06-22 14:01:47 +00001245 ... Execute ONOS CLI Command use single connection ${ONOS_SSH_IP} ${ONOS_SSH_PORT}
Hardik Windlass1189a642021-06-04 03:25:23 +00001246 ... volt-programmed-subscribers | grep ${subscriber_id} | grep '${service_type_upper}' --color=never
Hardik Windlass35db2aa2021-06-03 12:41:26 +00001247 ... ELSE
TorstenThieme4e2168e2021-06-22 14:01:47 +00001248 ... Execute ONOS CLI Command use single connection ${ONOS_SSH_IP} ${ONOS_SSH_PORT}
Gayathri.Selvan92d16862020-03-19 14:47:58 +00001249 ... volt-programmed-subscribers | grep ${subscriber_id}
1250 @{bandwidth_profile_array}= Split String ${bandwidth_profile_output} ,
1251 Log ${bandwidth_profile_array}
1252 FOR ${value} IN @{bandwidth_profile_array}
1253 @{row_value}= Split String ${value} =
1254 ${bandwidth_profile_name}= Set Variable If '${row_value[0]}' == ' ${stream_type}'
1255 ... ${row_value[1]}
1256 ${bandwidth_profile_name}= Convert To String ${bandwidth_profile_name}
1257 Run Keyword If "${bandwidth_profile_name}" != "None" Exit For Loop
1258 END
1259 Log ${bandwidth_profile_name}
1260 [Return] ${bandwidth_profile_name}
1261
1262Execute Remote Command
1263 [Documentation] SSH into a remote host and execute a command on the bare host or in a container.
1264 ... This replaces and simplifies the Login And Run Command On Remote System keyword in CORDRobot.
1265 [Arguments] ${cmd} ${ip} ${user} ${pass}=${None}
Andy Baviereff938d2020-06-29 18:27:49 -07001266 ... ${container_type}=${None} ${container_name}=${None} ${timeout}=${None}
Gayathri.Selvan92d16862020-03-19 14:47:58 +00001267 ${conn_id}= SSHLibrary.Open Connection ${ip}
1268 Run Keyword If '${pass}' != '${None}'
1269 ... SSHLibrary.Login ${user} ${pass}
1270 ... ELSE
1271 ... SSHLibrary.Login With Public Key ${user} %{HOME}/.ssh/id_rsa
1272 ${namespace}= Run Keyword If '${container_type}' == 'K8S' SSHLibrary.Execute Command
1273 ... kubectl get pods --all-namespaces | grep ${container_name} | awk '{print $1}'
Andy Bavierf6ab19c2020-05-14 10:34:47 -07001274 ${stdout} ${stderr} ${rc}= Run Keyword If '${container_type}' == 'LXC'
1275 ... SSHLibrary.Execute Command lxc exec ${container_name} -- ${cmd}
Andy Baviereff938d2020-06-29 18:27:49 -07001276 ... return_stderr=True return_rc=True timeout=${timeout}
Gayathri.Selvan92d16862020-03-19 14:47:58 +00001277 ... ELSE IF '${container_type}' == 'K8S'
Andy Bavierf6ab19c2020-05-14 10:34:47 -07001278 ... SSHLibrary.Execute Command kubectl -n ${namespace} exec ${container_name} -- ${cmd}
Andy Baviereff938d2020-06-29 18:27:49 -07001279 ... return_stderr=True return_rc=True timeout=${timeout}
Gayathri.Selvan92d16862020-03-19 14:47:58 +00001280 ... ELSE
Andy Baviereff938d2020-06-29 18:27:49 -07001281 ... SSHLibrary.Execute Command ${cmd} return_stderr=True return_rc=True timeout=${timeout}
Andy Bavierf6ab19c2020-05-14 10:34:47 -07001282
1283 Log ${stdout}
1284 Log ${stderr}
1285 Log ${rc}
Gayathri.Selvan92d16862020-03-19 14:47:58 +00001286 SSHLibrary.Close Connection
Andy Bavierf6ab19c2020-05-14 10:34:47 -07001287 [Return] ${stdout} ${stderr} ${rc}
Gayathri.Selvan92d16862020-03-19 14:47:58 +00001288
Suraj Gour33651272020-05-04 10:10:16 +05301289Start Remote Command
1290 [Documentation] SSH into a remote host and execute a command on the bare host or in a container.
1291 ... This replaces and simplifies the Login And Run Command On Remote System keyword in CORDRobot.
1292 [Arguments] ${cmd} ${ip} ${user} ${pass}=${None}
1293 ... ${container_type}=${None} ${container_name}=${None}
1294 ${conn_id}= SSHLibrary.Open Connection ${ip}
1295 Run Keyword If '${pass}' != '${None}'
1296 ... SSHLibrary.Login ${user} ${pass}
1297 ... ELSE
1298 ... SSHLibrary.Login With Public Key ${user} %{HOME}/.ssh/id_rsa
1299 ${namespace}= Run Keyword If '${container_type}' == 'K8S' SSHLibrary.Execute Command
1300 ... kubectl get pods --all-namespaces | grep ${container_name} | awk '{print $1}'
1301 Run Keyword If '${container_type}' == 'LXC'
1302 ... SSHLibrary.Start Command lxc exec ${container_name} -- ${cmd}
1303 ... ELSE IF '${container_type}' == 'K8S'
1304 ... SSHLibrary.Start Command kubectl -n ${namespace} exec ${container_name} -- ${cmd}
1305 ... ELSE
1306 ... SSHLibrary.Start Command ${cmd}
Andy Bavier9fb23232020-06-30 15:12:20 -07001307 # It seems that closing the connection immediately will sometimes kill the command
1308 Sleep 1s
Suraj Gour33651272020-05-04 10:10:16 +05301309 SSHLibrary.Close Connection
1310
Gayathri.Selvan92d16862020-03-19 14:47:58 +00001311Run Iperf3 Test Client
1312 [Arguments] ${src} ${server} ${args}
1313 [Documentation] Login to ${src} and run the iperf3 client against ${server} using ${args}.
1314 ... Return a Dictionary containing the results of the test.
Girish Gowdrad769b412021-05-16 11:09:46 -07001315 ${output} ${stderr} ${rc}= Execute Remote Command iperf3 -J -c ${server} ${args} -l 1024 -M 1350 | jq -M -c '.'
Gayathri.Selvan92d16862020-03-19 14:47:58 +00001316 ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
Andy Bavierf6ab19c2020-05-14 10:34:47 -07001317 Should Be Equal As Integers ${rc} 0
Gayathri.Selvan92d16862020-03-19 14:47:58 +00001318 ${object}= Evaluate json.loads(r'''${output}''') json
1319 [Return] ${object}
Hung-Wei Chiue0bec7c2020-05-29 22:16:56 +00001320
Suchitra Vemuri85cb7d62020-07-16 23:46:16 -07001321Run Iperf Test Client for MCAST
1322 [Arguments] ${src} ${server} ${args}
1323 [Documentation] Login to ${src} and run the iperf client against ${server} using ${args}.
1324 ... Return a Dictionary containing the results of the test.
1325 ${output} ${stderr} ${rc}= Execute Remote Command sudo iperf -c ${server} ${args} | jq -M -c '.'
1326 ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
1327 Should Be Equal As Integers ${rc} 0
1328 ${object}= Evaluate json.loads(r'''${output}''') json
1329 [Return] ${object}
1330
Hung-Wei Chiue0bec7c2020-05-29 22:16:56 +00001331RestoreONUs
1332 [Documentation] Restore all connected ONUs
Suchitra Vemuria6879aa2020-11-03 11:03:11 -08001333 [Arguments] ${num_all_onus}
1334 FOR ${I} IN RANGE 0 ${num_all_onus}
Hung-Wei Chiue0bec7c2020-05-29 22:16:56 +00001335 ${src}= Set Variable ${hosts.src[${I}]}
Hung-Wei Chiucc6e6552020-06-04 12:57:38 -07001336 ${container_type}= Get Variable Value ${src['container_type']} "null"
1337 ${container_name}= Get Variable Value ${src['container_name']} "null"
Hung-Wei Chiue0bec7c2020-05-29 22:16:56 +00001338 ${onu_type}= Get Variable Value ${src['onu_type']} "null"
Hung-Wei Chiucc6e6552020-06-04 12:57:38 -07001339 #Get ens6f0 from ens6f0.22
1340 ${if_name}= Replace String Using Regexp ${src['dp_iface_name']} \\..* \
Hung-Wei Chiue0bec7c2020-05-29 22:16:56 +00001341 Run Keyword IF '${onu_type}' == 'alpha' AlphaONURestoreDefault ${src['ip']} ${src['user']}
Hung-Wei Chiucc6e6552020-06-04 12:57:38 -07001342 ... ${src['pass']} ${if_name} admin admin ${container_type} ${container_name}
Hung-Wei Chiue0bec7c2020-05-29 22:16:56 +00001343 END
1344
1345AlphaONURestoreDefault
1346 [Documentation] Restore the Alpha ONU to factory setting
1347 [Arguments] ${rg_ip} ${rg_user} ${rg_pass} ${onu_ifname}
Hung-Wei Chiucc6e6552020-06-04 12:57:38 -07001348 ... ${onu_user} ${onu_pass} ${container_type}=${None} ${container_name}=${None}
Hung-Wei Chiue0bec7c2020-05-29 22:16:56 +00001349 ${output}= Login And Run Command On Remote System sudo ifconfig ${onu_ifname} 192.168.1.3/24
Hung-Wei Chiucc6e6552020-06-04 12:57:38 -07001350 ... ${rg_ip} ${rg_user} ${rg_pass} ${container_type} ${container_name}
TorstenThieme70bc5262021-01-19 12:12:55 +00001351 ${cmd} Catenate
Hung-Wei Chiue0bec7c2020-05-29 22:16:56 +00001352 ... (echo open "192.168.1.1"; sleep 1;
1353 ... echo "${onu_user}"; sleep 1;
1354 ... echo "${onu_pass}"; sleep 1;
1355 ... echo "restoredefault"; sleep 1) | telnet
1356 ${output}= Login And Run Command On Remote System ${cmd}
Hung-Wei Chiucc6e6552020-06-04 12:57:38 -07001357 ... ${rg_ip} ${rg_user} ${rg_pass} ${container_type} ${container_name}
Hung-Wei Chiue0bec7c2020-05-29 22:16:56 +00001358 Log To Console ${output}
1359 ${output}= Login And Run Command On Remote System sudo ifconfig ${onu_ifname} 0
Hung-Wei Chiucc6e6552020-06-04 12:57:38 -07001360 ... ${rg_ip} ${rg_user} ${rg_pass} ${container_type} ${container_name}
Suraj Gour33651272020-05-04 10:10:16 +05301361
1362Create traffic with each pbit and capture at other end
1363 [Documentation] Generates upstream traffic using Mausezahn tool
1364 ... with each pbit and validates reception at other end using tcpdump
1365 [Arguments] ${target_ip} ${target_iface} ${src_iface}
Girish Gowdra66cd95d2021-07-08 10:31:54 -07001366 ... ${packet_count} ${packet_type} ${c_vlan} ${s_vlan} ${direction} ${tcpdump_filter}
Suraj Gour33651272020-05-04 10:10:16 +05301367 ... ${dst_ip} ${dst_user} ${dst_pass} ${dst_container_type} ${dst_container_name}
1368 ... ${src_ip} ${src_user} ${src_pass} ${src_container_type} ${src_container_name}
1369 FOR ${pbit} IN RANGE 8
Andy Baviereff938d2020-06-29 18:27:49 -07001370 Execute Remote Command sudo pkill mausezahn
Suraj Gour33651272020-05-04 10:10:16 +05301371 ... ${src_ip} ${src_user} ${src_pass} ${src_container_type} ${src_container_name}
Girish Gowdrabbfbbc32021-05-17 14:36:58 -07001372 ${var1}= Set Variable sudo mausezahn ${src_iface} -B ${target_ip} -c ${packet_count}
Girish Gowdra66cd95d2021-07-08 10:31:54 -07001373 ${var2}= Run Keyword If "${direction}"=="downstream"
1374 ... Set Variable -t ${packet_type} "dp=80, flags=rst, p=aa:aa:aa" -Q ${pbit}:${s_vlan},${pbit}:${c_vlan}
1375 ... ELSE
1376 ... Set Variable -t ${packet_type} "dp=80, flags=rst, p=aa:aa:aa" -Q ${pbit}:${c_vlan}
Suraj Gour33651272020-05-04 10:10:16 +05301377 ${cmd}= Set Variable ${var1} ${var2}
1378 Start Remote Command ${cmd} ${src_ip} ${src_user} ${src_pass}
1379 ... ${src_container_type} ${src_container_name}
1380 ${output} ${stderr} ${rc}= Execute Remote Command
Andy Baviereff938d2020-06-29 18:27:49 -07001381 ... sudo tcpdump -l -U -c 30 -i ${target_iface} -e ${tcpdump_filter}
Suraj Gour33651272020-05-04 10:10:16 +05301382 ... ${dst_ip} ${dst_user} ${dst_pass} ${dst_container_type} ${dst_container_name}
Andy Baviereff938d2020-06-29 18:27:49 -07001383 ... timeout=30 seconds
1384 Execute Remote Command sudo pkill mausezahn
Suraj Gour33651272020-05-04 10:10:16 +05301385 ... ${src_ip} ${src_user} ${src_pass} ${src_container_type} ${src_container_name}
Girish Gowdrabbfbbc32021-05-17 14:36:58 -07001386 Run Keyword If "${tcpdump_filter}"=="tcp"
Girish Gowdraebeca682021-05-18 14:44:41 -07001387 ... Should Match Regexp ${output} , p ${pbit},
Suraj Gour33651272020-05-04 10:10:16 +05301388 END
TorstenThieme70bc5262021-01-19 12:12:55 +00001389
1390Determine Number Of ONU
1391 [Arguments] ${olt_serial_number}=${EMPTY} ${num_onus}=${num_all_onus}
1392 [Documentation] Determine the number of different ONUs for the given OLT taken from host.src
1393 ${onu_list} Create List
1394 FOR ${INDEX} IN RANGE 0 ${num_onus}
1395 Continue For Loop If "${olt_serial_number}"!="${hosts.src[${INDEX}].olt}" and "${olt_serial_number}"!="${EMPTY}"
1396 ${onu_id}= Get Index From List ${onu_list} ${hosts.src[${INDEX}].onu}
1397 Run Keyword If -1 == ${onu_id} Append To List ${onu_list} ${hosts.src[${INDEX}].onu}
1398 END
1399 ${real_num_onus}= Get Length ${onu_list}
1400 [Return] ${real_num_onus}