blob: 710fd56c4d6b2353d081c64c7c83e35115e28c62 [file] [log] [blame]
Kailash92764922019-07-25 08:21:39 -07001# Copyright 2017-present Open Networking Foundation
2#
3# Licensed under the Apache License, Version 2.0 (the "License");
4# you may not use this file except in compliance with the License.
5# You may obtain a copy of the License at
6#
7# http://www.apache.org/licenses/LICENSE-2.0
8#
9# Unless required by applicable law or agreed to in writing, software
10# distributed under the License is distributed on an "AS IS" BASIS,
11# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
12# See the License for the specific language governing permissions and
13# limitations under the License.
Kailash92764922019-07-25 08:21:39 -070014# robot test functions
15
16*** Settings ***
17Documentation Library for various utilities
18Library SSHLibrary
Kailash92764922019-07-25 08:21:39 -070019Library String
20Library DateTime
21Library Process
22Library Collections
23Library RequestsLibrary
24Library OperatingSystem
Andy Bavier63460da2020-02-20 14:35:12 -070025Library CORDRobot
26Library ImportResource resources=CORDRobot
TorstenThiemed4f48962020-12-08 12:17:19 +000027Resource ./voltctl.robot
Kailash92764922019-07-25 08:21:39 -070028
29*** Keywords ***
Kailash528f7c02019-07-31 10:55:49 -070030Check CLI Tools Configured
31 [Documentation] Tests that use 'voltctl' and 'kubectl' should execute this keyword in suite setup
32 # check voltctl and kubectl configured
Matteo Scandolo1eacdd82021-06-28 10:32:19 +020033 ${voltctl_rc} ${voltctl_output}= Run And Return Rc And Output voltctl -c ${VOLTCTL_CONFIG} device list
Hardik Windlass13803172021-04-26 08:17:07 +000034 Log ${voltctl_output}
35 ${kubectl_rc} ${kubectl_output}= Run And Return Rc And Output kubectl get pods
36 Log ${kubectl_output}
Gilles Depatie675a2062019-10-22 12:44:42 -040037 Run Keyword If ${voltctl_rc} != 0 or ${kubectl_rc} != 0 FATAL ERROR
38 ... VOLTCTL and KUBECTL not configured. Please configure before executing tests.
Gilles Depatieb5682f82019-10-31 10:39:45 -040039
40Send File To Onos
Zack Williamsa8fe75a2020-01-10 14:25:27 -070041 [Documentation] Send the content of the file to Onos to selected section of configuration
42 ... using Post Request
Huseyin Ahmet AYDIN42d3b712021-06-10 14:46:17 +000043 [Arguments] ${CONFIG_FILE} ${section}=${EMPTY}
Zack Williamsa8fe75a2020-01-10 14:25:27 -070044 ${Headers}= Create Dictionary Content-Type application/json
45 ${File_Data}= OperatingSystem.Get File ${CONFIG_FILE}
46 Log ${Headers}
47 Log ${File_Data}
48 ${resp}= Post Request ONOS
49 ... /onos/v1/network/configuration/${section} headers=${Headers} data=${File_Data}
50 Should Be Equal As Strings ${resp.status_code} 200
Andy Bavier88cd9f62019-11-26 16:22:33 -070051
52Common Test Suite Setup
53 [Documentation] Setup the test suite
Andy Bavier88cd9f62019-11-26 16:22:33 -070054 Set Global Variable ${KUBECTL_CONFIG} export KUBECONFIG=%{KUBECONFIG}
Matteo Scandolo5899be12020-11-11 15:38:07 -080055 Set Global Variable ${VOLTCTL_CONFIG} %{VOLTCONFIG}
Andy Bavier88cd9f62019-11-26 16:22:33 -070056 ${k8s_node_ip}= Evaluate ${nodes}[0].get("ip")
ubuntu6b6e7d42020-03-02 12:35:42 -080057 ${ONOS_REST_IP}= Get Environment Variable ONOS_REST_IP ${k8s_node_ip}
58 ${ONOS_SSH_IP}= Get Environment Variable ONOS_SSH_IP ${k8s_node_ip}
59 Set Global Variable ${ONOS_REST_IP}
60 Set Global Variable ${ONOS_SSH_IP}
Andy Bavier88cd9f62019-11-26 16:22:33 -070061 ${k8s_node_user}= Evaluate ${nodes}[0].get("user")
62 ${k8s_node_pass}= Evaluate ${nodes}[0].get("pass")
63 Check CLI Tools Configured
64 ${onos_auth}= Create List karaf karaf
65 ${HEADERS} Create Dictionary Content-Type=application/json
ubuntu6b6e7d42020-03-02 12:35:42 -080066 Create Session ONOS http://${ONOS_REST_IP}:${ONOS_REST_PORT} auth=${ONOS_AUTH}
Suchitra Vemuria6879aa2020-11-03 11:03:11 -080067 ${num_olts} Get Length ${olts}
68 ${list_olts} Create List
Suchitra Vemuriac9785e2021-01-07 16:50:18 -080069 # Create olt list from the configuration file
Suchitra Vemuria6879aa2020-11-03 11:03:11 -080070 FOR ${I} IN RANGE 0 ${num_olts}
71 ${ip} Evaluate ${olts}[${I}].get("ip")
72 ${user} Evaluate ${olts}[${I}].get("user")
73 ${pass} Evaluate ${olts}[${I}].get("pass")
74 ${serial_number} Evaluate ${olts}[${I}].get("serial")
75 ${olt_ssh_ip} Evaluate ${olts}[${I}].get("sship")
Andrea Campanella3dcce272021-01-15 16:04:47 +010076 ${type} Evaluate ${olts}[${I}].get("type")
Suchitra Vemuri09f878d2021-02-10 18:19:04 -080077 ${orig_olt_port} Evaluate ${olts}[${I}].get("oltPort")
78 ${port}= Set Variable If "${orig_olt_port}" == "None" ${OLT_PORT} ${orig_olt_port}
Suchitra Vemuria6879aa2020-11-03 11:03:11 -080079 ${onu_count}= Get ONU Count For OLT ${hosts.src} ${serial_number}
Suchitra Vemurife309412020-12-01 19:19:52 -080080 ${onu_list}= Get ONU List For OLT ${hosts.src} ${serial_number}
Suchitra Vemuria6879aa2020-11-03 11:03:11 -080081 ${olt} Create Dictionary ip ${ip} user ${user} pass
Andrea Campanella3dcce272021-01-15 16:04:47 +010082 ... ${pass} sn ${serial_number} onucount ${onu_count} type ${type}
Suchitra Vemuri09f878d2021-02-10 18:19:04 -080083 ... sship ${olt_ssh_ip} oltport ${port} onus ${onu_list}
Suchitra Vemuria6879aa2020-11-03 11:03:11 -080084 Append To List ${list_olts} ${olt}
85 END
86 ${num_all_onus}= Get Length ${hosts.src}
87 ${num_all_onus}= Convert to String ${num_all_onus}
Andy Bavier88cd9f62019-11-26 16:22:33 -070088 #send sadis file to onos
Andy Baviera2691752019-11-27 12:18:38 -070089 ${sadis_file}= Get Variable Value ${sadis.file}
Zack Williamsa8fe75a2020-01-10 14:25:27 -070090 Log To Console \nSadis File:${sadis_file}
Andy Bavier88cd9f62019-11-26 16:22:33 -070091 Run Keyword Unless '${sadis_file}' is '${None}' Send File To Onos ${sadis_file} apps/
Suchitra Vemuria6879aa2020-11-03 11:03:11 -080092 Set Suite Variable ${num_all_onus}
93 Set Suite Variable ${num_olts}
94 Set Suite Variable ${list_olts}
95 ${olt_count}= Get Length ${list_olts}
96 Set Suite Variable ${olt_count}
Andrea Campanella3dcce272021-01-15 16:04:47 +010097 @{container_list}= Create List ${OLT_ADAPTER_APP_LABEL} adapter-open-onu voltha-api-server
Andy Bavier88cd9f62019-11-26 16:22:33 -070098 ... voltha-ro-core voltha-rw-core-11 voltha-rw-core-12 voltha-ofagent
99 Set Suite Variable ${container_list}
100 ${datetime}= Get Current Date
suraj gour7f6d5fe2019-11-29 10:56:35 +0000101 Set Suite Variable ${datetime}
102
Suchitra Vemuria6879aa2020-11-03 11:03:11 -0800103Get ONU Count For OLT
104 [Arguments] ${src} ${serial_number}
105 [Documentation] Gets ONU Count for the specified OLT
106 ${src_length}= Get Length ${src}
107 ${count}= Set Variable 0
108 FOR ${I} IN RANGE 0 ${src_length}
109 ${sn} Evaluate ${src}[${I}].get("olt")
TorstenThiemed4f48962020-12-08 12:17:19 +0000110 ${count}= Run Keyword If '${serial_number}' == '${sn}' Evaluate ${count} + 1
111 ... ELSE Set Variable ${count}
Suchitra Vemuria6879aa2020-11-03 11:03:11 -0800112 END
113 [Return] ${count}
114
Suchitra Vemurife309412020-12-01 19:19:52 -0800115Get ONU List For OLT
116 [Arguments] ${src} ${serial_number}
117 [Documentation] Gets ONU List for the specified OLT
118 ${src_length}= Get Length ${src}
119 ${onu_list}= Create List
120 FOR ${I} IN RANGE 0 ${src_length}
121 ${sn} Evaluate ${src}[${I}].get("olt")
Matteo Scandolo243288d2021-09-20 14:48:58 -0700122 Run Keyword If '${serial_number}' == '${sn}' Append To List ${onu_list} ${src}[${I}][onu]
Suchitra Vemurife309412020-12-01 19:19:52 -0800123 ... ELSE Set Variable ${onu_list}
124 END
125 [Return] ${onu_list}
126
suraj gour7f6d5fe2019-11-29 10:56:35 +0000127WPA Reassociate
suraj gour7f6d5fe2019-11-29 10:56:35 +0000128 [Documentation] Executes a particular wpa_cli reassociate, which performs force reassociation
Zack Williamsa8fe75a2020-01-10 14:25:27 -0700129 [Arguments] ${iface} ${ip} ${user} ${pass}=${None}
130 ... ${container_type}=${None} ${container_name}=${None}
suraj gour7f6d5fe2019-11-29 10:56:35 +0000131 #Below for loops are used instead of sleep time, to execute reassociate command and check status
Zack Williamsa8fe75a2020-01-10 14:25:27 -0700132 FOR ${i} IN RANGE 70
133 ${output}= Login And Run Command On Remote System
134 ... wpa_cli -i ${iface} reassociate ${ip} ${user}
135 ... ${pass} ${container_type} ${container_name}
136 ${passed}= Run Keyword And Return Status Should Contain ${output} OK
Andy Bavierb63f6d22020-03-12 15:34:37 -0700137 Exit For Loop If ${passed}
Zack Williamsa8fe75a2020-01-10 14:25:27 -0700138 END
Andy Bavierb63f6d22020-03-12 15:34:37 -0700139 Should Be True ${passed} Status does not contain 'SUCCESS'
Zack Williamsa8fe75a2020-01-10 14:25:27 -0700140 FOR ${i} IN RANGE 70
141 ${output}= Login And Run Command On Remote System
Andy Bavierae4a17e2020-02-25 14:54:36 -0700142 ... wpa_cli -i ${iface} status | grep SUCCESS ${ip} ${user}
Zack Williamsa8fe75a2020-01-10 14:25:27 -0700143 ... ${pass} ${container_type} ${container_name}
144 ${passed}= Run Keyword And Return Status Should Contain ${output} SUCCESS
Andy Bavierb63f6d22020-03-12 15:34:37 -0700145 Exit For Loop If ${passed}
Zack Williamsa8fe75a2020-01-10 14:25:27 -0700146 END
Andy Bavierb63f6d22020-03-12 15:34:37 -0700147 Should Be True ${passed} Status does not contain 'SUCCESS'
Zack Williamsa8fe75a2020-01-10 14:25:27 -0700148
suraj gour7f6d5fe2019-11-29 10:56:35 +0000149Validate Authentication After Reassociate
Zack Williamsa8fe75a2020-01-10 14:25:27 -0700150 [Arguments] ${auth_pass} ${iface} ${ip} ${user} ${pass}=${None}
151 ... ${container_type}=${None} ${container_name}=${None}
152 [Documentation]
153 ... Executes a particular reassociate request on the RG using wpa_cli.
154 ... auth_pass determines if authentication should pass
Andy Bavier84834d42020-02-25 13:49:50 -0700155 ${wpa_log}= Catenate SEPARATOR=. /tmp/wpa ${iface} log
156 ${output}= Login And Run Command On Remote System truncate -s 0 ${wpa_log}; cat ${wpa_log}
157 ... ${ip} ${user} ${pass} ${container_type} ${container_name}
158 Log ${output}
159 Should Not Contain ${output} authentication completed successfully
suraj gour7f6d5fe2019-11-29 10:56:35 +0000160 WPA Reassociate ${iface} ${ip} ${user} ${pass} ${container_type} ${container_name}
Zack Williamsa8fe75a2020-01-10 14:25:27 -0700161 Run Keyword If '${auth_pass}' == 'True' Wait Until Keyword Succeeds ${timeout} 2s
Andy Bavier84834d42020-02-25 13:49:50 -0700162 ... Check Remote File Contents True ${wpa_log} ${iface}.*authentication completed successfully
Zack Williamsa8fe75a2020-01-10 14:25:27 -0700163 ... ${ip} ${user} ${pass} ${container_type} ${container_name}
suraj gour7f6d5fe2019-11-29 10:56:35 +0000164 Run Keyword If '${auth_pass}' == 'False' Sleep 20s
Suchitra Vemuri3cb29f82020-02-25 13:59:58 -0800165 Run Keyword If '${auth_pass}' == 'False' Check Remote File Contents False /tmp/wpa.log
Andy Bavier84834d42020-02-25 13:49:50 -0700166 ... ${iface}.*authentication completed successfully ${ip} ${user} ${pass}
Zack Williamsa8fe75a2020-01-10 14:25:27 -0700167 ... ${container_type} ${container_name}
suraj gourd5cfdbb2019-12-13 12:44:55 +0000168
169Send Dhclient Request To Release Assigned IP
Zack Williamsa8fe75a2020-01-10 14:25:27 -0700170 [Arguments] ${iface} ${ip} ${user} ${path_dhcpleasefile} ${pass}=${None}
171 ... ${container_type}=${None} ${container_name}=${None}
suraj gourd5cfdbb2019-12-13 12:44:55 +0000172 [Documentation] Executes a dhclient with option to release ip against a particular interface on the RG (src)
Zack Williamsa8fe75a2020-01-10 14:25:27 -0700173 ${result}= Login And Run Command On Remote System
174 ... dhclient -nw -r ${iface} && rm ${path_dhcpleasefile}/dhclient.* ${ip} ${user}
suraj gourd5cfdbb2019-12-13 12:44:55 +0000175 ... ${pass} ${container_type} ${container_name}
176 Log ${result}
177 #Should Contain ${result} DHCPRELEASE
178 [Return] ${result}
suraj gour1ecfae92019-12-20 15:11:40 +0000179
180Check Remote File Contents For WPA Logs
Zack Williamsa8fe75a2020-01-10 14:25:27 -0700181 [Arguments] ${file_should_exist} ${file} ${pattern} ${ip} ${user} ${pass}=${None}
182 ... ${container_type}=${None} ${container_name}=${None} ${prompt}=~$
suraj gour1ecfae92019-12-20 15:11:40 +0000183 [Documentation] Checks for particular pattern count in a file
Zack Williamsa8fe75a2020-01-10 14:25:27 -0700184 ${result}= Login And Run Command On Remote System
185 ... cat ${file} | grep '${pattern}' | wc -l ${ip} ${user} ${pass}
suraj gour1ecfae92019-12-20 15:11:40 +0000186 ... ${container_type} ${container_name} ${prompt}
187 [Return] ${result}
Gayathri.Selvanee4a91b2020-01-17 06:49:53 +0000188
189Perform Sanity Test
Suchitra Vemuria6879aa2020-11-03 11:03:11 -0800190 [Documentation] This keyword iterate all OLTs and performs Sanity Test Procedure
191 ... for all the ONUs connected to each OLT - ATT workflow
TorstenThiemec3c23232021-01-13 13:06:31 +0000192 ... For repeating sanity test without subscriber changes set flag supress_add_subscriber=True.
193 ... In all other (common) cases flag has to be set False (default).
194 [Arguments] ${supress_add_subscriber}=False
Suchitra Vemuria6879aa2020-11-03 11:03:11 -0800195 FOR ${J} IN RANGE 0 ${num_olts}
196 ${olt_serial_number}= Set Variable ${list_olts}[${J}][sn]
197 ${onu_count}= Set Variable ${list_olts}[${J}][onucount]
198 ${of_id}= Wait Until Keyword Succeeds ${timeout} 15s Validate OLT Device in ONOS
199 ... ${olt_serial_number}
200 Set Global Variable ${of_id}
TorstenThiemedda37652021-11-11 16:22:05 +0000201 ${nni_port}= Wait Until Keyword Succeeds ${timeout} 2s Get NNI Port in ONOS ${of_id}
Suchitra Vemuria6879aa2020-11-03 11:03:11 -0800202 Perform Sanity Test Per OLT ${of_id} ${nni_port} ${olt_serial_number} ${onu_count}
TorstenThiemec3c23232021-01-13 13:06:31 +0000203 ... ${supress_add_subscriber}
Suchitra Vemuria6879aa2020-11-03 11:03:11 -0800204 END
205
206Perform Sanity Test Per OLT
TorstenThiemec3c23232021-01-13 13:06:31 +0000207 [Arguments] ${of_id} ${nni_port} ${olt_serial_number} ${num_onus} ${supress_add_subscriber}=False
Gayathri.Selvanee4a91b2020-01-17 06:49:53 +0000208 [Documentation] This keyword performs Sanity Test Procedure
209 ... Sanity test performs authentication, dhcp and pings for all the ONUs given for the POD
210 ... This keyword can be used to call in any other tests where sanity check is required
Suchitra Vemuria6879aa2020-11-03 11:03:11 -0800211 ... and avoids duplication of code. - ATT workflow
TorstenThiemec3c23232021-01-13 13:06:31 +0000212 ... For repeating sanity test without subscriber changes set flag supress_add_subscriber=True.
213 ... In all other (common) cases flag has to be set False (default).
Suchitra Vemuria6879aa2020-11-03 11:03:11 -0800214 FOR ${I} IN RANGE 0 ${num_all_onus}
Gayathri.Selvanee4a91b2020-01-17 06:49:53 +0000215 ${src}= Set Variable ${hosts.src[${I}]}
216 ${dst}= Set Variable ${hosts.dst[${I}]}
Suchitra Vemuria6879aa2020-11-03 11:03:11 -0800217 Continue For Loop If "${olt_serial_number}"!="${src['olt']}"
Gayathri.Selvanee4a91b2020-01-17 06:49:53 +0000218 ${onu_device_id}= Get Device ID From SN ${src['onu']}
Matteo Scandoloc2f48fa2021-09-29 13:32:55 -0700219 ${onu_port}= Wait Until Keyword Succeeds ${timeout} 2s
Hardik Windlass1ed2eee2021-06-25 09:51:03 +0000220 ... Get ONU Port in ONOS ${src['onu']} ${of_id} ${src['uni_id']}
Suchitra Vemuri8078b972020-02-06 19:07:41 -0800221 # Check ONU port is Enabled in ONOS
Matteo Scandoloc2f48fa2021-09-29 13:32:55 -0700222 Wait Until Keyword Succeeds 120s 2s
Hardik Windlass39015672021-07-05 05:48:08 +0000223 ... Verify UNI Port Is Enabled ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${src['onu']} ${src['uni_id']}
Matteo Scandolo243288d2021-09-20 14:48:58 -0700224 # Verify Default Meter in ONOS (valid only for ATT)
225 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
226 ... Verify Default Meter Present in ONOS ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${of_id}
Matteo Scandolo7e519fb2021-08-13 11:35:16 -0700227 # Verify default EAPOL flows are added for the ONU port
TorstenThiemec3c23232021-01-13 13:06:31 +0000228 Run Keyword Unless ${supress_add_subscriber}
229 ... Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s
Matteo Scandolo7e519fb2021-08-13 11:35:16 -0700230 ... Verify Eapol Flows Added For ONU ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${of_id} ${onu_port}
Suchitra Vemuri8078b972020-02-06 19:07:41 -0800231 # Verify ONU state in voltha
232 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s Validate Device
233 ... ENABLED ACTIVE REACHABLE
234 ... ${src['onu']} onu=True onu_reason=omci-flows-pushed
235 # Perform Authentication
Andy Bavier84834d42020-02-25 13:49:50 -0700236 ${wpa_log}= Run Keyword If ${has_dataplane} Catenate SEPARATOR=.
237 ... /tmp/wpa ${src['dp_iface_name']} log
Matteo Scandoloc2f48fa2021-09-29 13:32:55 -0700238 Run Keyword If ${has_dataplane} Validate Authentication True
Gayathri.Selvanee4a91b2020-01-17 06:49:53 +0000239 ... ${src['dp_iface_name']} wpa_supplicant.conf ${src['ip']} ${src['user']} ${src['pass']}
Andy Bavier84834d42020-02-25 13:49:50 -0700240 ... ${src['container_type']} ${src['container_name']} ${wpa_log}
Matteo Scandoloc2f48fa2021-09-29 13:32:55 -0700241 Wait Until Keyword Succeeds ${timeout} 2
ubuntu6b6e7d42020-03-02 12:35:42 -0800242 ... Verify ONU in AAA-Users ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${onu_port}
TorstenThiemec3c23232021-01-13 13:06:31 +0000243 Run Keyword Unless ${supress_add_subscriber}
TorstenThieme4e2168e2021-06-22 14:01:47 +0000244 ... Execute ONOS CLI Command use single connection ${ONOS_SSH_IP} ${ONOS_SSH_PORT}
Gayathri.Selvanee4a91b2020-01-17 06:49:53 +0000245 ... volt-add-subscriber-access ${of_id} ${onu_port}
Suchitra Vemuri9da44302020-03-04 14:24:49 -0800246 # Verify that no pending flows exist for the ONU port
Matteo Scandoloc2f48fa2021-09-29 13:32:55 -0700247 Wait Until Keyword Succeeds ${timeout} 2s
Suchitra Vemuri9da44302020-03-04 14:24:49 -0800248 ... Verify No Pending Flows For ONU ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${onu_port}
Hardik Windlass21807632020-04-14 16:24:55 +0530249 # Verify subscriber access flows are added for the ONU port
Matteo Scandoloc2f48fa2021-09-29 13:32:55 -0700250 Wait Until Keyword Succeeds ${timeout} 5s
Hardik Windlass21807632020-04-14 16:24:55 +0530251 ... Verify Subscriber Access Flows Added For ONU ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${of_id}
252 ... ${onu_port} ${nni_port} ${src['c_tag']} ${src['s_tag']}
Matteo Scandolo7e519fb2021-08-13 11:35:16 -0700253 # Verify subscriber EAPOL flow is installed
Matteo Scandoloc2f48fa2021-09-29 13:32:55 -0700254 Wait Until Keyword Succeeds ${timeout} 5s
Matteo Scandolo7e519fb2021-08-13 11:35:16 -0700255 ... Verify Eapol Flows Added For ONU ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${of_id}
256 ... ${onu_port} ${src['c_tag']}
Hardik Windlass2a9b1592020-07-23 18:28:13 +0530257 # Verify Meters in ONOS
258 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
259 ... Verify Meters in ONOS ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${of_id} ${onu_port}
Matteo Scandoloc2f48fa2021-09-29 13:32:55 -0700260 Run Keyword If ${has_dataplane} Validate DHCP and Ping True
Gayathri.Selvanee4a91b2020-01-17 06:49:53 +0000261 ... True ${src['dp_iface_name']} ${src['s_tag']} ${src['c_tag']} ${dst['dp_iface_ip_qinq']}
262 ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
263 ... ${dst['dp_iface_name']} ${dst['ip']} ${dst['user']} ${dst['pass']} ${dst['container_type']}
264 ... ${dst['container_name']}
Matteo Scandoloc2f48fa2021-09-29 13:32:55 -0700265 Wait Until Keyword Succeeds ${timeout} 2s
ubuntu6b6e7d42020-03-02 12:35:42 -0800266 ... Validate Subscriber DHCP Allocation ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${onu_port}
Gayathri.Selvanee4a91b2020-01-17 06:49:53 +0000267 END
268
Hardik Windlassa3d04b92020-02-17 15:06:05 +0000269Perform Sanity Test DT
Suchitra Vemuria6879aa2020-11-03 11:03:11 -0800270 [Documentation] This keyword iterate all OLTs and performs Sanity Test Procedure for DT workflow
TorstenThiemec3c23232021-01-13 13:06:31 +0000271 ... For repeating sanity test without subscriber changes set flag supress_add_subscriber=True.
272 ... In all other (common) cases flag has to be set False (default).
273 [Arguments] ${supress_add_subscriber}=False
Suchitra Vemuria6879aa2020-11-03 11:03:11 -0800274 FOR ${J} IN RANGE 0 ${num_olts}
275 ${olt_serial_number}= Set Variable ${list_olts}[${J}][sn]
276 ${num_onus}= Set Variable ${list_olts}[${J}][onucount]
277 ${olt_device_id}= Get OLTDeviceID From OLT List ${olt_serial_number}
278 ${of_id}= Wait Until Keyword Succeeds ${timeout} 15s Validate OLT Device in ONOS
279 ... ${olt_serial_number}
280 Set Global Variable ${of_id}
TorstenThiemedda37652021-11-11 16:22:05 +0000281 ${nni_port}= Wait Until Keyword Succeeds ${timeout} 2s Get NNI Port in ONOS ${of_id}
Suchitra Vemuria6879aa2020-11-03 11:03:11 -0800282 Perform Sanity Test DT Per OLT ${of_id} ${nni_port} ${olt_serial_number} ${num_onus}
TorstenThiemec3c23232021-01-13 13:06:31 +0000283 ... ${supress_add_subscriber}
Suchitra Vemuria6879aa2020-11-03 11:03:11 -0800284 # Verify ONOS Flows
285 # Number of Access Flows on ONOS equals 4 * the Number of Active ONUs (2 for each downstream and upstream)
286 ${onos_flows_count}= Evaluate 4 * ${num_onus}
287 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
288 ... Verify Subscriber Access Flows Added Count DT ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${of_id}
289 ... ${onos_flows_count}
290 # Verify VOLTHA Flows
291 # Number of per OLT Flows equals Twice the Number of Active ONUs (each for downstream and upstream) + 1 for LLDP
292 ${olt_flows}= Evaluate 2 * ${num_onus} + 1
293 # Number of per ONU Flows equals 2 (one each for downstream and upstream)
294 ${onu_flows}= Set Variable 2
295 Run Keyword Wait Until Keyword Succeeds ${timeout} 5s Validate OLT Flows ${olt_flows}
296 ... ${olt_device_id}
297 ${List_ONU_Serial} Create List
298 Set Suite Variable ${List_ONU_Serial}
Suchitra Vemuri21a47fd2020-11-16 18:39:09 -0800299 Build ONU SN List ${List_ONU_Serial} ${olt_serial_number}
Suchitra Vemuria6879aa2020-11-03 11:03:11 -0800300 Log ${List_ONU_Serial}
301 Run Keyword Wait Until Keyword Succeeds ${timeout} 5s Validate ONU Flows
302 ... ${List_ONU_Serial} ${onu_flows}
303 END
304
305
306Perform Sanity Test DT Per OLT
TorstenThiemec3c23232021-01-13 13:06:31 +0000307 [Arguments] ${of_id} ${nni_port} ${olt_serial_number} ${num_onus} ${supress_add_subscriber}=False
Hardik Windlassa3d04b92020-02-17 15:06:05 +0000308 [Documentation] This keyword performs Sanity Test Procedure for DT Workflow
309 ... Sanity test performs dhcp and pings (without EAPOL and DHCP flows) for all the ONUs given for the POD
310 ... This keyword can be used to call in any other tests where sanity check is required
311 ... and avoids duplication of code.
TorstenThiemec3c23232021-01-13 13:06:31 +0000312 ... For repeating sanity test without subscriber changes set flag supress_add_subscriber=True.
313 ... In all other (common) cases flag has to be set False (default).
Suchitra Vemuria6879aa2020-11-03 11:03:11 -0800314 FOR ${I} IN RANGE 0 ${num_all_onus}
Hardik Windlassa3d04b92020-02-17 15:06:05 +0000315 ${src}= Set Variable ${hosts.src[${I}]}
316 ${dst}= Set Variable ${hosts.dst[${I}]}
Suchitra Vemuria6879aa2020-11-03 11:03:11 -0800317 Continue For Loop If "${olt_serial_number}"!="${src['olt']}"
Hardik Windlassa3d04b92020-02-17 15:06:05 +0000318 ${onu_device_id}= Get Device ID From SN ${src['onu']}
Matteo Scandoloc2f48fa2021-09-29 13:32:55 -0700319 ${onu_port}= Wait Until Keyword Succeeds ${timeout} 2s
Hardik Windlassa3d04b92020-02-17 15:06:05 +0000320 ... Get ONU Port in ONOS ${src['onu']} ${of_id}
321 # Check ONU port is Enabled in ONOS
Matteo Scandoloc2f48fa2021-09-29 13:32:55 -0700322 Wait Until Keyword Succeeds 120s 2s
Hardik Windlass39015672021-07-05 05:48:08 +0000323 ... Verify UNI Port Is Enabled ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${src['onu']}
TorstenThiemec3c23232021-01-13 13:06:31 +0000324 Run Keyword Unless ${supress_add_subscriber}
TorstenThieme4e2168e2021-06-22 14:01:47 +0000325 ... Execute ONOS CLI Command use single connection ${ONOS_SSH_IP} ${ONOS_SSH_PORT}
Hardik Windlassa3d04b92020-02-17 15:06:05 +0000326 ... volt-add-subscriber-access ${of_id} ${onu_port}
Hardik Windlassfb5eace2020-03-26 14:49:01 +0530327 # Verify subscriber access flows are added for the ONU port
Matteo Scandoloc2f48fa2021-09-29 13:32:55 -0700328 Wait Until Keyword Succeeds ${timeout} 5s
Hardik Windlass25e11702020-03-30 20:05:19 +0530329 ... Verify Subscriber Access Flows Added For ONU DT ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${of_id}
330 ... ${onu_port} ${nni_port} ${src['s_tag']}
TorstenThiemea36068c2021-02-19 09:57:32 +0000331 # Verify ONU state in voltha
332 ${onu_reasons}= Create List omci-flows-pushed
333 # In case of previous dis- and enable of ONU and no further subscriber add actions state will be onu-reenabled
334 Run Keyword If ${supress_add_subscriber} Append To List ${onu_reasons} onu-reenabled
Matteo Scandoloc2f48fa2021-09-29 13:32:55 -0700335 Wait Until Keyword Succeeds ${timeout} 5s Validate Device
Hardik Windlassa3d04b92020-02-17 15:06:05 +0000336 ... ENABLED ACTIVE REACHABLE
TorstenThiemec3c23232021-01-13 13:06:31 +0000337 ... ${src['onu']} onu=True onu_reason=${onu_reasons}
Hardik Windlass2a9b1592020-07-23 18:28:13 +0530338 # Verify Meters in ONOS
339 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
Girish Gowdra21ec25d2021-05-24 10:07:01 -0700340 ... Verify Meters in ONOS Ietf ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${of_id} ${onu_port}
Hardik Windlassfb5eace2020-03-26 14:49:01 +0530341 # TODO: Yet to Verify on the GPON based Physical POD (VOL-2652)
Matteo Scandoloc2f48fa2021-09-29 13:32:55 -0700342 Run Keyword If ${has_dataplane} Validate DHCP and Ping True
Hardik Windlassa3d04b92020-02-17 15:06:05 +0000343 ... True ${src['dp_iface_name']} ${src['s_tag']} ${src['c_tag']} ${dst['dp_iface_ip_qinq']}
344 ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
345 ... ${dst['dp_iface_name']} ${dst['ip']} ${dst['user']} ${dst['pass']} ${dst['container_type']}
346 ... ${dst['container_name']}
Hardik Windlassa3d04b92020-02-17 15:06:05 +0000347 END
Suchitra Vemuria6879aa2020-11-03 11:03:11 -0800348
349Validate All OLT Flows
350 [Documentation] This keyword iterate all OLTs and performs Sanity Test Procedure for DT workflow
351 FOR ${J} IN RANGE 0 ${num_olts}
352 ${olt_serial_number}= Set Variable ${list_olts}[${J}][sn]
353 ${num_onus}= Set Variable ${list_olts}[${J}][onucount]
354 ${olt_device_id}= Get OLTDeviceID From OLT List ${olt_serial_number}
355 ${of_id}= Wait Until Keyword Succeeds ${timeout} 15s Validate OLT Device in ONOS
356 ... ${olt_serial_number}
357 Set Global Variable ${of_id}
358 # Verify ONOS Flows
359 # Number of Access Flows on ONOS equals 4 * the Number of Active ONUs (2 for each downstream and upstream)
360 ${onos_flows_count}= Evaluate 4 * ${num_onus}
361 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
362 ... Verify Subscriber Access Flows Added Count DT ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${of_id}
363 ... ${onos_flows_count}
364 # Verify VOLTHA Flows
365 # Number of per OLT Flows equals Twice the Number of Active ONUs (each for downstream and upstream) + 1 for LLDP
366 ${olt_flows}= Evaluate 2 * ${num_onus} + 1
367 # Number of per ONU Flows equals 2 (one each for downstream and upstream)
368 ${onu_flows}= Set Variable 2
369 Run Keyword Wait Until Keyword Succeeds ${timeout} 5s Validate OLT Flows ${olt_flows}
370 ... ${olt_device_id}
371 ${List_ONU_Serial} Create List
372 Set Suite Variable ${List_ONU_Serial}
Andrea Campanella6391f842020-11-16 10:01:18 +0100373 Build ONU SN List ${List_ONU_Serial} ${olt_serial_number}
Suchitra Vemuria6879aa2020-11-03 11:03:11 -0800374 Log ${List_ONU_Serial}
375 Run Keyword Wait Until Keyword Succeeds ${timeout} 5s Validate ONU Flows
376 ... ${List_ONU_Serial} ${onu_flows}
377 END
Hardik Windlassa3d04b92020-02-17 15:06:05 +0000378
TorstenThieme70bc5262021-01-19 12:12:55 +0000379Perform Sanity Tests TT
380 [Documentation] This keyword performs both Sanity Test Procedure for TT Workflow
381 ... Sanity Test TT for HSIA, VoD, VoIP services and Sanity Test TT for MCAST
382 ... For repeating sanity tests without subscriber changes set flag supress_add_subscriber=True.
383 ... In all other (common) cases flag has to be set False (default).
384 [Arguments] ${supress_add_subscriber}=False
385 Perform Sanity Test TT ${supress_add_subscriber}
TorstenThieme136ebf72021-02-26 14:27:07 +0000386 # run of mcast sanity test is currently limited for real HW
387 Run Keyword If ${has_dataplane} Perform Sanity Test TT MCAST ${supress_add_subscriber}
TorstenThieme70bc5262021-01-19 12:12:55 +0000388
Huseyin Ahmet AYDIN7cb5ae62021-10-28 11:07:27 +0000389Provision Subscription TT
390 [Documentation] Provision Subscription TT
391 [Arguments] ${supress_add_subscriber}=False
392 FOR ${I} IN RANGE 0 ${num_all_onus}
393 ${src}= Set Variable ${hosts.src[${I}]}
394 ${dst}= Set Variable ${hosts.dst[${I}]}
395 ${service_type}= Get Variable Value ${src['service_type']} "null"
396 Run Keyword IF '${service_type}' != 'mcast' Provision Subscription for ONU TT ${src} ${dst}
397 ... ${supress_add_subscriber}
398 END
399
Suchitra Vemuri2f1e07d2020-06-26 19:18:01 -0700400Perform Sanity Test TT
401 [Documentation] This keyword performs Sanity Test Procedure for TT Workflow
402 ... Sanity test performs dhcp and pings (without EAPOL and DHCP flows) for all the ONUs given for the POD
403 ... This keyword can be used to call in any other tests where sanity check is required
404 ... and avoids duplication of code.
TorstenThieme70bc5262021-01-19 12:12:55 +0000405 ... For repeating sanity test without subscriber changes set flag supress_add_subscriber=True.
406 ... In all other (common) cases flag has to be set False (default).
407 [Arguments] ${supress_add_subscriber}=False
Suchitra Vemuria6879aa2020-11-03 11:03:11 -0800408 FOR ${I} IN RANGE 0 ${num_all_onus}
Suchitra Vemuri85cb7d62020-07-16 23:46:16 -0700409 ${src}= Set Variable ${hosts.src[${I}]}
410 ${dst}= Set Variable ${hosts.dst[${I}]}
411 ${service_type}= Get Variable Value ${src['service_type']} "null"
TorstenThiemea36068c2021-02-19 09:57:32 +0000412 Run Keyword IF '${service_type}' != 'mcast' Sanity Test TT one ONU ${src} ${dst} ${supress_add_subscriber}
Suchitra Vemuri85cb7d62020-07-16 23:46:16 -0700413 END
Hardik Windlass3ec9d4f2021-06-08 05:48:15 +0000414 # Verify Subscriber Access Flow Count
415 @{particular_onu_device_port}= Create List
416 FOR ${I} IN RANGE 0 ${num_all_onus}
417 ${src}= Set Variable ${hosts.src[${I}]}
418 ${of_id}= Wait Until Keyword Succeeds ${timeout} 15s Validate OLT Device in ONOS ${src['olt']}
Hardik Windlass1ed2eee2021-06-25 09:51:03 +0000419 ${onu_port}= Wait Until Keyword Succeeds ${timeout} 2s Get ONU Port in ONOS
420 ... ${src['onu']} ${of_id} ${src['uni_id']}
Hardik Windlass3ec9d4f2021-06-08 05:48:15 +0000421 Append To List ${particular_onu_device_port} ${onu_port}
422 END
423 ${list_onu_port}= Remove Duplicates ${particular_onu_device_port}
424 ${num_of_provisioned_onus}= Get Length ${list_onu_port}
425 FOR ${I} IN RANGE 0 ${olt_count}
426 ${olt_serial_number}= Get From Dictionary ${olt_ids}[${I}] sn
427 ${olt_device_id}= Get OLTDeviceID From OLT List ${olt_serial_number}
Hardik Windlass315d6152021-06-09 08:22:44 +0000428 ${of_id}= Wait Until Keyword Succeeds ${timeout} 15s Validate OLT Device in ONOS ${olt_serial_number}
Hardik Windlass3ec9d4f2021-06-08 05:48:15 +0000429 ${num_onus}= Set Variable ${list_olts}[${I}][onucount]
430 # Verify ONOS Flows
431 # Number of Access Flows on ONOS equals 16 * the Number of Active ONUs + 3 for default LLDP, IGMP and DHCP
432 ${onos_flows_count}= Run Keyword If ${has_dataplane} Evaluate 16 * ${num_of_provisioned_onus} + 3
433 ... ELSE Evaluate 15 * ${num_of_provisioned_onus} + 3
Matteo Scandoloc2f48fa2021-09-29 13:32:55 -0700434 Wait Until Keyword Succeeds ${timeout} 5s
Hardik Windlass3ec9d4f2021-06-08 05:48:15 +0000435 ... Verify Added Flow Count for OLT TT ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${of_id}
436 ... ${onos_flows_count}
437 # Verify VOLTHA Flows
438 # Number of per OLT Flows equals 10 * Number of Active ONUs + 3 for default LLDP, IGMP and DHCP
439 ${olt_flows}= Run Keyword If ${has_dataplane} Evaluate 10 * ${num_of_provisioned_onus} + 3
440 ... ELSE Evaluate 9 * ${num_of_provisioned_onus} + 3
441 # Number of per ONU Flows equals 6 for 3play service data plane + 4 for Trap to Host Flows
442 ${onu_flows}= Run Keyword If ${has_dataplane} Set Variable 10
443 ... ELSE Set Variable 9
444 Run Keyword Wait Until Keyword Succeeds ${timeout} 5s Validate OLT Flows ${olt_flows}
445 ... ${olt_device_id}
446 ${List_ONU_Serial} Create List
447 Set Suite Variable ${List_ONU_Serial}
448 Build ONU SN List ${List_ONU_Serial} ${olt_serial_number} ${num_onus}
449 Log ${List_ONU_Serial}
Hardik Windlass1ed2eee2021-06-25 09:51:03 +0000450 # TODO: Fix ${onu_flows} calculations based on UNIs provisioned
451 # Run Keyword Wait Until Keyword Succeeds ${timeout} 5s Validate ONU Flows
452 # ... ${List_ONU_Serial} ${onu_flows}
Hardik Windlass3ec9d4f2021-06-08 05:48:15 +0000453 END
Suchitra Vemuri85cb7d62020-07-16 23:46:16 -0700454
Huseyin Ahmet AYDIN7cb5ae62021-10-28 11:07:27 +0000455Provision Subscription for ONU TT
456 [Documentation] This keyword performs provision services a single ONU for TT workflow
Suchitra Vemuri85cb7d62020-07-16 23:46:16 -0700457 ... Tests for one ONU
TorstenThieme70bc5262021-01-19 12:12:55 +0000458 ... For repeating sanity test without subscriber changes set flag supress_add_subscriber=True.
459 ... In all other (common) cases flag has to be set False (default).
460 [Arguments] ${src} ${dst} ${supress_add_subscriber}=False
Suchitra Vemuria6879aa2020-11-03 11:03:11 -0800461 ${of_id}= Wait Until Keyword Succeeds ${timeout} 15s Validate OLT Device in ONOS ${src['olt']}
Suchitra Vemuri2f1e07d2020-06-26 19:18:01 -0700462 Set Global Variable ${of_id}
TorstenThiemedda37652021-11-11 16:22:05 +0000463 ${nni_port}= Wait Until Keyword Succeeds ${timeout} 2s Get NNI Port in ONOS ${of_id}
Suchitra Vemuri85cb7d62020-07-16 23:46:16 -0700464 ${onu_device_id}= Get Device ID From SN ${src['onu']}
Hardik Windlass5a2d1f42021-11-12 12:52:04 +0000465 ${onu_port}= Wait Until Keyword Succeeds ${timeout} 2s
Hardik Windlass1ed2eee2021-06-25 09:51:03 +0000466 ... Get ONU Port in ONOS ${src['onu']} ${of_id} ${src['uni_id']}
Suchitra Vemuri85cb7d62020-07-16 23:46:16 -0700467 # Check ONU port is Enabled in ONOS
Hardik Windlass5a2d1f42021-11-12 12:52:04 +0000468 Wait Until Keyword Succeeds ${timeout} 2s
Hardik Windlass39015672021-07-05 05:48:08 +0000469 ... Verify UNI Port Is Enabled ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${src['onu']} ${src['uni_id']}
TorstenThiemea36068c2021-02-19 09:57:32 +0000470 Run Keyword Unless ${supress_add_subscriber}
TorstenThieme4e2168e2021-06-22 14:01:47 +0000471 ... Execute ONOS CLI Command use single connection ${ONOS_SSH_IP} ${ONOS_SSH_PORT}
Suchitra Vemuri85cb7d62020-07-16 23:46:16 -0700472 ... volt-add-subscriber-access ${of_id} ${onu_port}
TorstenThiemea36068c2021-02-19 09:57:32 +0000473 # Verify ONU state in voltha
Emrehan UZUNec59bea2021-05-27 13:45:57 +0000474 ${onu_reasons}= Create List omci-flows-pushed onu-reenabled
TorstenThiemea36068c2021-02-19 09:57:32 +0000475 # In case of previous dis- and enable of ONU and no further subscriber add actions state will be onu-reenabled
476 Run Keyword If ${supress_add_subscriber} Append To List ${onu_reasons} onu-reenabled
Hardik Windlass5a2d1f42021-11-12 12:52:04 +0000477 Wait Until Keyword Succeeds ${timeout} 5s Validate Device
Suchitra Vemuri85cb7d62020-07-16 23:46:16 -0700478 ... ENABLED ACTIVE REACHABLE
Matteo Scandolo74bd5c32020-12-08 09:52:19 -0800479 ... ${src['onu']} onu=True onu_reason=${onu_reasons}
Huseyin Ahmet AYDIN7cb5ae62021-10-28 11:07:27 +0000480
481Sanity Test TT one ONU
482 [Documentation] This keyword performs sanity test for a single ONU for TT workflow
483 ... Tests for one ONU
484 ... Assertions apply to HSIA, VoD, VoIP services
485 ... For repeating sanity test without subscriber changes set flag supress_add_subscriber=True.
486 ... In all other (common) cases flag has to be set False (default).
487 [Arguments] ${src} ${dst} ${supress_add_subscriber}=False
488 Provision Subscription for ONU TT ${src} ${dst} ${supress_add_subscriber}
489 ${of_id}= Wait Until Keyword Succeeds ${timeout} 15s Validate OLT Device in ONOS ${src['olt']}
490 Set Global Variable ${of_id}
491 ${onu_port}= Wait Until Keyword Succeeds ${timeout} 2s Get ONU Port in ONOS ${src['onu']}
492 ... ${of_id} ${src['uni_id']}
Suchitra Vemuri85cb7d62020-07-16 23:46:16 -0700493 # TODO: Yet to Verify on the GPON based Physical POD (VOL-2652)
494 Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure Validate DHCP and Ping True
495 ... True ${src['dp_iface_name']} ${src['s_tag']} ${src['c_tag']} ${dst['dp_iface_ip_qinq']}
496 ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
497 ... ${dst['dp_iface_name']} ${dst['ip']} ${dst['user']} ${dst['pass']} ${dst['container_type']}
498 ... ${dst['container_name']}
Matteo Scandolo37a6cb72021-01-08 13:55:59 -0800499 Run Keyword IF '${src['service_type']}'!='hsia'
Hardik Windlass5a2d1f42021-11-12 12:52:04 +0000500 ... Wait Until Keyword Succeeds ${timeout} 2s
Suchitra Vemuri8d3b0032020-09-11 17:49:08 -0700501 ... Validate Subscriber DHCP Allocation ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${onu_port}
Suchitra Vemuri42819412020-10-01 17:45:43 -0700502 ... ${src['c_tag']}
Suchitra Vemuri85cb7d62020-07-16 23:46:16 -0700503
504Perform Sanity Test TT MCAST
505 [Documentation] This keyword performs Sanity Test Procedure for TT Workflow
506 ... Adds subscribers
507 ... Validates for MCAST
TorstenThieme70bc5262021-01-19 12:12:55 +0000508 ... For repeating sanity test without subscriber changes set flag supress_add_subscriber=True.
509 ... In all other (common) cases flag has to be set False (default).
510 [Arguments] ${supress_add_subscriber}=False
Suchitra Vemuria6879aa2020-11-03 11:03:11 -0800511 FOR ${I} IN RANGE 0 ${num_all_onus}
Suchitra Vemuri2f1e07d2020-06-26 19:18:01 -0700512 ${src}= Set Variable ${hosts.src[${I}]}
513 ${dst}= Set Variable ${hosts.dst[${I}]}
Suchitra Vemuri85cb7d62020-07-16 23:46:16 -0700514 ${service_type}= Get Variable Value ${src['service_type']} "null"
515 Run Keyword IF '${service_type}' == 'mcast' Sanity Test TT MCAST one ONU ${src}
TorstenThiemea36068c2021-02-19 09:57:32 +0000516 ... ${dst} ${supress_add_subscriber}
Suchitra Vemuri2f1e07d2020-06-26 19:18:01 -0700517 END
Suchitra Vemuri85cb7d62020-07-16 23:46:16 -0700518
519Sanity Test TT MCAST one ONU
520 [Documentation] This keyword performs sanity test for a single ONU for TT workflow
521 ... Tests for one ONU
522 ... Assertions apply to MCAST services
TorstenThieme70bc5262021-01-19 12:12:55 +0000523 ... For repeating sanity test without subscriber changes set flag supress_add_subscriber=True.
524 ... In all other (common) cases flag has to be set False (default).
525 [Arguments] ${src} ${dst} ${supress_add_subscriber}=False
Suchitra Vemuri85cb7d62020-07-16 23:46:16 -0700526 # Check for iperf and jq tools
527 ${stdout} ${stderr} ${rc}= Execute Remote Command which iperf jq
528 ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']}
529 ... ${src['container_name']}
530 Pass Execution If ${rc} != 0 Skipping test: iperf / jq not found on the RG
531
532 #Reset the IP on the interface
533 ${output}= Login And Run Command On Remote System sudo ifconfig ${src['dp_iface_name']} 0
534 ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
535 # Kill iperf on BNG
536 ${rg_output}= Run Keyword and Continue On Failure Login And Run Command On Remote System
537 ... sudo kill -9 `pidof iperf`
538 ... ${dst['bng_ip']} ${dst['bng_user']} ${dst['bng_pass']} ${dst['container_type']}
539 ... ${dst['container_name']}
540
541 # Setup RG for Multi-cast test
542 ${output}= Login And Run Command On Remote System
543 ... sudo ifconfig ${src['dp_iface_name']} ${src['mcast_rg']} up ; sudo kill -9 `pidof iperf`
544 ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
545 ${output}= Login And Run Command On Remote System
546 ... sudo ip route add ${src['mcast_grp_subnet_mask']} dev ${src['dp_iface_name']} scope link
547 ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
548
549 # Perform operations for adding subscriber
Suchitra Vemuria6879aa2020-11-03 11:03:11 -0800550 ${of_id}= Wait Until Keyword Succeeds ${timeout} 15s Validate OLT Device in ONOS ${src['olt']}
Suchitra Vemuri85cb7d62020-07-16 23:46:16 -0700551 Set Global Variable ${of_id}
TorstenThiemedda37652021-11-11 16:22:05 +0000552 ${nni_port}= Wait Until Keyword Succeeds ${timeout} 2s Get NNI Port in ONOS ${of_id}
Suchitra Vemuri85cb7d62020-07-16 23:46:16 -0700553 ${onu_device_id}= Get Device ID From SN ${src['onu']}
Hardik Windlass5a2d1f42021-11-12 12:52:04 +0000554 ${onu_port}= Wait Until Keyword Succeeds ${timeout} 2s
Hardik Windlass1ed2eee2021-06-25 09:51:03 +0000555 ... Get ONU Port in ONOS ${src['onu']} ${of_id} ${src['uni_id']}
Suchitra Vemuri85cb7d62020-07-16 23:46:16 -0700556 # Check ONU port is Enabled in ONOS
Hardik Windlass5a2d1f42021-11-12 12:52:04 +0000557 Wait Until Keyword Succeeds ${timeout} 2s
Hardik Windlass39015672021-07-05 05:48:08 +0000558 ... Verify UNI Port Is Enabled ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${src['onu']} ${src['uni_id']}
TorstenThiemea36068c2021-02-19 09:57:32 +0000559 Run Keyword Unless ${supress_add_subscriber}
TorstenThieme4e2168e2021-06-22 14:01:47 +0000560 ... Execute ONOS CLI Command use single connection ${ONOS_SSH_IP} ${ONOS_SSH_PORT}
Suchitra Vemuri85cb7d62020-07-16 23:46:16 -0700561 ... volt-add-subscriber-access ${of_id} ${onu_port}
TorstenThiemea36068c2021-02-19 09:57:32 +0000562 # Verify ONU state in voltha
Emrehan UZUNec59bea2021-05-27 13:45:57 +0000563 ${onu_reasons}= Create List omci-flows-pushed onu-reenabled
TorstenThiemea36068c2021-02-19 09:57:32 +0000564 # In case of previous dis- and enable of ONU and no further subscriber add actions state will be onu-reenabled
565 Run Keyword If ${supress_add_subscriber} Append To List ${onu_reasons} onu-reenabled
Hardik Windlass5a2d1f42021-11-12 12:52:04 +0000566 Wait Until Keyword Succeeds ${timeout} 5s Validate Device
Suchitra Vemuri85cb7d62020-07-16 23:46:16 -0700567 ... ENABLED ACTIVE REACHABLE
Matteo Scandolo74bd5c32020-12-08 09:52:19 -0800568 ... ${src['onu']} onu=True onu_reason=${onu_reasons}
Suchitra Vemuri85cb7d62020-07-16 23:46:16 -0700569
570 # Setup iperf on the BNG
571 ${server_output}= Login And Run Command On Remote System
572 ... sudo iperf -c ${dst['dp_iface_ip_qinq']} -u -T 32 -t 60 -i 1 &
573 ... ${dst['bng_ip']} ${dst['bng_user']} ${dst['bng_pass']} ${dst['container_type']}
574 ... ${dst['container_name']}
575
576 # Setup iperf on the RG
577 ${rg_output}= Run Keyword and Continue On Failure Wait Until Keyword Succeeds 90s 5s
578 ... Login And Run Command On Remote System
579 ... rm -rf /tmp/rg_output ; sudo iperf -s -u -B ${dst['dp_iface_ip_qinq']} -i 1 -D >> /tmp/rg_output
580 ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
581 Log ${rg_output}
582 Sleep 60s
583 ${output}= Run Keyword and Continue On Failure Wait Until Keyword Succeeds 90s 5s
584 ... Login And Run Command On Remote System
585 ... cat /tmp/rg_output | grep KBytes
586 ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
587 Log ${output}
588 Should Contain ${output} KBytes
589
590 # Kill iperf on BNG
591 ${rg_output}= Run Keyword and Continue On Failure Login And Run Command On Remote System
592 ... sudo kill -9 `pidof iperf`
593 ... ${dst['bng_ip']} ${dst['bng_user']} ${dst['bng_pass']} ${dst['container_type']}
594 ... ${dst['container_name']}
595
596 # Kill iperf on the RG
597 ${output}= Run Keyword and Continue On Failure Login And Run Command On Remote System
598 ... sudo kill -9 `pidof iperf`
599 ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
600
Hardik Windlass62db9d92021-05-17 09:32:40 +0000601Setup Soak
602 [Documentation] Pre-test Setup for Soak Job
603 ${olt_ids} Create List
604 FOR ${I} IN RANGE 0 ${num_olts}
605 ${olt_serial_number}= Set Variable ${list_olts}[${I}][sn]
606 ${olt_device_id}= Get Device ID From SN ${olt_serial_number}
607 ${logical_id}= Get Logical Device ID From SN ${olt_serial_number}
608 ${of_id}= Wait Until Keyword Succeeds ${timeout} 15s Validate OLT Device in ONOS
609 ... ${olt_serial_number}
TorstenThiemedda37652021-11-11 16:22:05 +0000610 ${nni_port}= Wait Until Keyword Succeeds ${timeout} 2s Get NNI Port in ONOS ${of_id}
Hardik Windlass62db9d92021-05-17 09:32:40 +0000611 ${olt} Create Dictionary device_id ${olt_device_id} logical_id ${logical_id}
612 ... of_id ${of_id} sn ${olt_serial_number}
613 Append To List ${olt_ids} ${olt}
614 END
615 Set Global Variable ${olt_ids}
Suchitra Vemuri2f1e07d2020-06-26 19:18:01 -0700616
Gayathri.Selvanee4a91b2020-01-17 06:49:53 +0000617Setup
618 [Documentation] Pre-test Setup
Hardik Windlass4ed54502021-05-14 07:34:15 +0000619 [Arguments] ${skip_empty_device_list_test}=False
Gayathri.Selvanee4a91b2020-01-17 06:49:53 +0000620 #test for empty device list
Hardik Windlass4ed54502021-05-14 07:34:15 +0000621 Run Keyword If '${skip_empty_device_list_test}'=='False' Test Empty Device List
Hardik Windlass5e214b22021-02-26 10:37:14 +0000622 # TBD: Need for this Sleep
623 Run Keyword If ${has_dataplane} Sleep 180s
Suchitra Vemuria6879aa2020-11-03 11:03:11 -0800624 # Create a list of olt ids (logical and device_id)
625 ${olt_ids} Create List
626 FOR ${I} IN RANGE 0 ${num_olts}
627 #create/preprovision device
Andrea Campanella3dcce272021-01-15 16:04:47 +0100628 ${olt_device_id}= Run Keyword If "${list_olts}[${I}][type]" == "${None}"
Suchitra Vemuri09f878d2021-02-10 18:19:04 -0800629 ... Create Device ${list_olts}[${I}][ip] ${list_olts}[${I}][oltport]
630 ... ELSE Create Device ${list_olts}[${I}][ip] ${list_olts}[${I}][oltport] ${list_olts}[${I}][type]
Suchitra Vemuria6879aa2020-11-03 11:03:11 -0800631 ${olt_serial_number}= Set Variable ${list_olts}[${I}][sn]
632 #Set Suite Variable ${olt_device_id}
633 #validate olt states
634 Wait Until Keyword Succeeds ${timeout} 5s
Hardik Windlass8b446492021-06-10 06:25:23 +0000635 ... Validate OLT Device PREPROVISIONED UNKNOWN UNKNOWN ${olt_device_id} by_dev_id=True
Suchitra Vemuria6879aa2020-11-03 11:03:11 -0800636 Sleep 5s
637 Enable Device ${olt_device_id}
Suchitra Vemuricf6e89c2021-03-24 19:14:15 -0700638 # Increasing the timer to incorporate wait time for in-band
639 Wait Until Keyword Succeeds 540s 5s
Suchitra Vemuria6879aa2020-11-03 11:03:11 -0800640 ... Validate OLT Device ENABLED ACTIVE REACHABLE ${olt_serial_number}
641 ${logical_id}= Get Logical Device ID From SN ${olt_serial_number}
642 # Set Suite Variable ${logical_id}
643 ${of_id}= Wait Until Keyword Succeeds ${timeout} 15s Validate OLT Device in ONOS
644 ... ${olt_serial_number}
645 ${olt} Create Dictionary device_id ${olt_device_id} logical_id ${logical_id}
646 ... of_id ${of_id} sn ${olt_serial_number}
647 Append To List ${olt_ids} ${olt}
648 END
649 Set Global Variable ${olt_ids}
650
651Get ofID From OLT List
652 [Documentation] Retrieves the corresponding of_id for the OLT serial number specified
653 [Arguments] ${serial_number}
654 FOR ${I} IN RANGE 0 ${olt_count}
655 ${sn}= Get From Dictionary ${olt_ids}[${I}] sn
Andrea Campanella317a94c2020-11-13 10:38:19 +0100656 ${of_id}= Run Keyword IF "${serial_number}"=="${sn}"
657 ... Get From Dictionary ${olt_ids}[${I}] of_id ELSE Set Variable ${of_id}
Suchitra Vemuria6879aa2020-11-03 11:03:11 -0800658 END
659 [Return] ${of_id}
660
661Get OLTDeviceID From OLT List
662 [Documentation] Retrieves the corresponding olt_device_id for the OLT serial number specified
663 [Arguments] ${serial_number}
Suchitra Vemuri4b8f4f52020-11-17 19:12:50 -0800664 ${olt_device_id}= Set Variable 0
Suchitra Vemuria6879aa2020-11-03 11:03:11 -0800665 FOR ${I} IN RANGE 0 ${olt_count}
666 ${sn}= Get From Dictionary ${olt_ids}[${I}] sn
Andrea Campanella317a94c2020-11-13 10:38:19 +0100667 ${olt_device_id}= Run Keyword IF "${serial_number}"=="${sn}"
668 ... Get From Dictionary ${olt_ids}[${I}] device_id ELSE Set Variable ${olt_device_id}
Suchitra Vemuria6879aa2020-11-03 11:03:11 -0800669 END
670 [Return] ${olt_device_id}
Gayathri.Selvanee4a91b2020-01-17 06:49:53 +0000671
Andrea Campanellad848de02020-11-24 10:23:41 +0100672Get Num of Onus From OLT SN
673 [Documentation] Retrieves the corresponding number of ONUs for a given OLT based on serial number specified
674 [Arguments] ${serial_number}
675 ${num_of_olt_onus}= Set Variable 0
676 FOR ${I} IN RANGE 0 ${olt_count}
677 ${sn}= Get From Dictionary ${olt_ids}[${I}] sn
678 ${num_of_olt_onus}= Run Keyword IF "${serial_number}"=="${sn}"
679 ... Get From Dictionary ${list_olts}[${I}] onucount ELSE Set Variable ${num_of_olt_onus}
680 END
681 [Return] ${num_of_olt_onus}
682
Hardik Windlassaaea3402020-03-10 19:45:45 +0530683Validate ONUs After OLT Disable
684 [Documentation] Validates the ONUs state in Voltha, ONUs port state in ONOS
685 ... and that pings do not succeed After corresponding OLT is Disabled
Andrea Campanella4e507882020-11-26 11:33:11 +0100686 [Arguments] ${num_onus} ${olt_serial_number}
Hardik Windlassaaea3402020-03-10 19:45:45 +0530687 FOR ${I} IN RANGE 0 ${num_onus}
688 ${src}= Set Variable ${hosts.src[${I}]}
689 ${dst}= Set Variable ${hosts.dst[${I}]}
Andrea Campanella4e507882020-11-26 11:33:11 +0100690 Continue For Loop If "${olt_serial_number}"!="${src['olt']}"
Suchitra Vemuria6879aa2020-11-03 11:03:11 -0800691 ${of_id}= Get ofID From OLT List ${src['olt']}
Hardik Windlassaaea3402020-03-10 19:45:45 +0530692 ${onu_device_id}= Get Device ID From SN ${src['onu']}
693 ${onu_port}= Wait Until Keyword Succeeds ${timeout} 2s Get ONU Port in ONOS ${src['onu']}
694 ... ${of_id}
Girish Gowdra3f0fadb2021-11-08 16:49:28 -0800695 ${valid_onu_states}= Create List stopping-openomci omci-flows-deleted
Hardik Windlassaaea3402020-03-10 19:45:45 +0530696 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
697 ... Validate Device ENABLED DISCOVERED
Girish Gowdra3f0fadb2021-11-08 16:49:28 -0800698 ... UNREACHABLE ${src['onu']} onu=True onu_reason=${valid_onu_states}
Hardik Windlassaaea3402020-03-10 19:45:45 +0530699 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s
Hardik Windlass39015672021-07-05 05:48:08 +0000700 ... Verify UNI Port Is Disabled ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${src['onu']}
Hardik Windlassaaea3402020-03-10 19:45:45 +0530701 Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure
702 ... Wait Until Keyword Succeeds 60s 2s
703 ... Check Ping False ${dst['dp_iface_ip_qinq']} ${src['dp_iface_name']}
704 ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
Hardik Windlassaaea3402020-03-10 19:45:45 +0530705 END
706
Gayathri.Selvanee4a91b2020-01-17 06:49:53 +0000707Delete All Devices and Verify
708 [Documentation] Remove any devices from VOLTHA and ONOS
709 # Clear devices from VOLTHA
710 Disable Devices In Voltha Root=true
711 Wait Until Keyword Succeeds ${timeout} 2s Test Devices Disabled In Voltha Root=true
712 Delete Devices In Voltha Root=true
713 Wait Until Keyword Succeeds ${timeout} 2s Test Empty Device List
Hardik Windlasse8b99222021-01-25 10:03:14 +0000714 FOR ${I} IN RANGE 0 ${num_olts}
715 ${olt_serial_number}= Set Variable ${list_olts}[${I}][sn]
Matteo Scandolo71ff08a2021-10-21 17:47:27 -0700716 Wait Until Keyword Succeeds ${timeout} 5s
Hardik Windlasse8b99222021-01-25 10:03:14 +0000717 ... Validate Deleted Device Cleanup In ONOS ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${olt_serial_number}
718 END
Hardik Windlass44abec12021-09-27 07:52:33 +0000719 Wait Until Keyword Succeeds ${timeout} 5s Validate Cleanup In ETCD ${INFRA_NAMESPACE}
Gayathri.Selvanee4a91b2020-01-17 06:49:53 +0000720
721Teardown
722 [Documentation] kills processes and cleans up interfaces on src+dst servers
723 Run Keyword If ${has_dataplane} Clean Up Linux
Gayathri.Selvanee4a91b2020-01-17 06:49:53 +0000724
725Teardown Suite
726 [Documentation] Clean up device if desired
Andrea Campanella82add372021-11-05 12:01:15 +0100727 Start Logging Setup or Teardown Teardown-${SUITE NAME}
Gayathri.Selvanee4a91b2020-01-17 06:49:53 +0000728 Run Keyword If ${teardown_device} Delete All Devices and Verify
Andrea Campanella1ff03222021-09-10 10:14:21 +0200729 Run Keyword And Continue On Failure Collect Logs
TorstenThieme4e2168e2021-06-22 14:01:47 +0000730 Close All ONOS SSH Connections
Andrea Campanella82add372021-11-05 12:01:15 +0100731 Stop Logging Setup or Teardown Teardown-${SUITE NAME}
Gayathri.Selvanee4a91b2020-01-17 06:49:53 +0000732
733Delete Device and Verify
Suchitra Vemuria6879aa2020-11-03 11:03:11 -0800734 [Arguments] ${olt_serial_number}
Gayathri.Selvanee4a91b2020-01-17 06:49:53 +0000735 [Documentation] Disable -> Delete devices via voltctl and verify its removed
Suchitra Vemuri2fa9bba2020-01-22 17:38:48 -0800736 ${olt_device_id}= Get Device ID From SN ${olt_serial_number}
Gayathri.Selvanee4a91b2020-01-17 06:49:53 +0000737 ${rc} ${output}= Run and Return Rc and Output
Matteo Scandolo5899be12020-11-11 15:38:07 -0800738 ... voltctl -c ${VOLTCTL_CONFIG} device disable ${olt_device_id}
Gayathri.Selvanee4a91b2020-01-17 06:49:53 +0000739 Should Be Equal As Integers ${rc} 0
740 Sleep 5s
741 Wait Until Keyword Succeeds ${timeout} 5s
742 ... Validate OLT Device DISABLED UNKNOWN REACHABLE ${olt_serial_number}
743 ${rc} ${output}= Run and Return Rc and Output
Matteo Scandolo5899be12020-11-11 15:38:07 -0800744 ... voltctl -c ${VOLTCTL_CONFIG} device delete ${olt_device_id}
Hardik Windlassdf5035e2021-01-27 08:34:59 +0000745 Sleep 50s
Gayathri.Selvanee4a91b2020-01-17 06:49:53 +0000746 Should Be Equal As Integers ${rc} 0
747 Wait Until Keyword Succeeds ${timeout} 5s Validate Device Removed ${olt_device_id}
Hardik Windlasse8b99222021-01-25 10:03:14 +0000748 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 15s
749 ... Validate Deleted Device Cleanup In ONOS ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${olt_serial_number}
Gayathri.Selvanee4a91b2020-01-17 06:49:53 +0000750
Gayathri.Selvan283a63c2020-01-23 04:09:18 +0000751Repeat Sanity Test
752 [Documentation] This keyword performs Sanity Test Procedure
753 ... Sanity test performs authentication, dhcp and pings for all the ONUs given for the POD
754 ... This keyword can be used to call in any other tests where sanity check is required
755 ... with wpa reassociation
756 ${of_id}= Wait Until Keyword Succeeds ${timeout} 15s Validate OLT Device in ONOS ${olt_serial_number}
757 Set Global Variable ${of_id}
Suchitra Vemuria6879aa2020-11-03 11:03:11 -0800758 FOR ${I} IN RANGE 0 ${num_all_onus}
Gayathri.Selvan283a63c2020-01-23 04:09:18 +0000759 ${src}= Set Variable ${hosts.src[${I}]}
760 ${dst}= Set Variable ${hosts.dst[${I}]}
Suchitra Vemuri8078b972020-02-06 19:07:41 -0800761 ${onu_port}= Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s
762 ... Get ONU Port in ONOS ${src['onu']} ${of_id}
763 # Check ONU port is Enabled in ONOD
764 Run Keyword And Continue On Failure Wait Until Keyword Succeeds 120s 2s
Hardik Windlass39015672021-07-05 05:48:08 +0000765 ... Verify UNI Port Is Enabled ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${src['onu']}
Suchitra Vemuri8078b972020-02-06 19:07:41 -0800766 # Verify EAPOL flows are added for the ONU port
767 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s
Matteo Scandolo7e519fb2021-08-13 11:35:16 -0700768 ... Verify Eapol Flows Added For ONU ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${of_id} ${onu_port}
Suchitra Vemuri8078b972020-02-06 19:07:41 -0800769 # Verify ONU state in voltha
Suchitra Vemurid1e27fb2020-02-01 16:34:37 -0800770 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s Validate Device
Suchitra Vemuri81e4f022020-02-01 13:16:02 -0800771 ... ENABLED ACTIVE REACHABLE
772 ... ${src['onu']} onu=True onu_reason=omci-flows-pushed
Suchitra Vemuri8078b972020-02-06 19:07:41 -0800773 # Perform Authentication
Gayathri.Selvan283a63c2020-01-23 04:09:18 +0000774 Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure
775 ... Validate Authentication After Reassociate
776 ... True ${src['dp_iface_name']} ${src['ip']} ${src['user']} ${src['pass']}
777 ... ${src['container_type']} ${src['container_name']}
778 Wait Until Keyword Succeeds ${timeout} 2s
David K. Bainbridgec0617c92020-03-05 21:17:19 -0800779 ... Verify ONU in AAA-Users ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${onu_port}
Gayathri.Selvan283a63c2020-01-23 04:09:18 +0000780 Wait Until Keyword Succeeds ${timeout} 2s
TorstenThieme4e2168e2021-06-22 14:01:47 +0000781 ... Execute ONOS CLI Command use single connection ${ONOS_SSH_IP} ${ONOS_SSH_PORT}
Gayathri.Selvan283a63c2020-01-23 04:09:18 +0000782 ... volt-add-subscriber-access ${of_id} ${onu_port}
783 Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure
784 ... Validate DHCP and Ping True True
785 ... ${src['dp_iface_name']} ${src['s_tag']} ${src['c_tag']} ${dst['dp_iface_ip_qinq']}
786 ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
787 ... ${dst['dp_iface_name']} ${dst['ip']} ${dst['user']} ${dst['pass']} ${dst['container_type']}
788 ... ${dst['container_name']}
789 Wait Until Keyword Succeeds ${timeout} 2s Run Keyword And Continue On Failure
David K. Bainbridgec0617c92020-03-05 21:17:19 -0800790 ... Validate Subscriber DHCP Allocation ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${onu_port}
Gayathri.Selvan283a63c2020-01-23 04:09:18 +0000791 END
Gayathri.Selvanb6a2b542020-01-24 07:24:23 +0000792
Hardik Windlass41701e82021-01-12 17:44:44 +0000793Disable Enable PON Port Per OLT
794 [Arguments] ${olt_serial_number}
795 [Documentation] This keyword disables and then enables OLT PON port and
796 ... also validate ONUs for each corresponding case
797 ${olt_device_id}= Get OLTDeviceID From OLT List ${olt_serial_number}
798 ${olt_pon_port_list}= Retrieve OLT PON Ports ${olt_device_id}
799 ${olt_pon_port_list_len}= Get Length ${olt_pon_port_list}
800 FOR ${INDEX0} IN RANGE 0 ${olt_pon_port_list_len}
801 ${olt_pon_port}= Get From List ${olt_pon_port_list} ${INDEX0}
802 ${olt_peer_list}= Retrieve Peer List From OLT PON Port ${olt_device_id} ${olt_pon_port}
803 # Disable the OLT PON Port and Validate OLT Device
804 DisableOrEnable OLT PON Port disable ${olt_device_id} ${olt_pon_port}
805 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
806 ... Validate OLT PON Port Status ${olt_device_id} ${olt_pon_port}
807 ... DISABLED DISCOVERED
808 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
809 ... Validate OLT Device ENABLED ACTIVE REACHABLE
810 ... ${olt_serial_number}
811 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
812 ... Validate ONUs for PON OLT Disable ${olt_serial_number} ${olt_peer_list}
813 # Enable the OLT PON Port back, and check ONU status are back to "ACTIVE"
814 DisableOrEnable OLT PON Port enable ${olt_device_id} ${olt_pon_port}
815 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
816 ... Validate OLT PON Port Status ${olt_device_id} ${olt_pon_port}
817 ... ENABLED ACTIVE
818 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
819 ... Validate ONUs for PON OLT Enable ${olt_serial_number} ${olt_peer_list}
820 END
821
Hardik Windlass16cdf962020-04-29 15:26:50 +0530822Validate ONUs for PON OLT Disable
Hardik Windlass41701e82021-01-12 17:44:44 +0000823 [Arguments] ${olt_sn} ${olt_peer_list}
Hardik Windlass16cdf962020-04-29 15:26:50 +0530824 [Documentation] This keyword validates that Ping fails for ONUs connected to Disabled OLT PON port
825 ... And Pings succeed for other Active OLT PON port ONUs
826 ... Also it removes subscriber for Disabled OLT PON port ONUs to replicate ATT workflow
Hardik Windlass41701e82021-01-12 17:44:44 +0000827 FOR ${I} IN RANGE 0 ${num_all_onus}
Hardik Windlass16cdf962020-04-29 15:26:50 +0530828 ${src}= Set Variable ${hosts.src[${I}]}
829 ${dst}= Set Variable ${hosts.dst[${I}]}
Hardik Windlass41701e82021-01-12 17:44:44 +0000830 Continue For Loop If "${olt_sn}"!="${src['olt']}"
Hardik Windlass16cdf962020-04-29 15:26:50 +0530831 ${onu_device_id}= Get Device ID From SN ${src['onu']}
Hardik Windlass41701e82021-01-12 17:44:44 +0000832 ${of_id}= Wait Until Keyword Succeeds ${timeout} 15s Validate OLT Device in ONOS ${src['olt']}
Hardik Windlass16cdf962020-04-29 15:26:50 +0530833 ${onu_port}= Wait Until Keyword Succeeds ${timeout} 2s Get ONU Port in ONOS ${src['onu']}
Hardik Windlass1ed2eee2021-06-25 09:51:03 +0000834 ... ${of_id} ${src['uni_id']}
Hardik Windlass16cdf962020-04-29 15:26:50 +0530835 ${matched}= Match ONU in PON OLT Peer List ${olt_peer_list} ${onu_device_id}
836 Run Keyword If ${matched}
837 ... Run Keywords
838 ... Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
839 ... Validate Device ENABLED DISCOVERED
Andrea Campanellaa9b59b42021-09-21 16:13:17 +0000840 ... UNREACHABLE ${src['onu']} onu=True onu_reason=omci-flows-deleted
Hardik Windlass16cdf962020-04-29 15:26:50 +0530841 ... AND Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s
Hardik Windlass39015672021-07-05 05:48:08 +0000842 ... Verify UNI Port Is Disabled ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${src['onu']} ${src['uni_id']}
Hardik Windlass16cdf962020-04-29 15:26:50 +0530843 ... AND Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure
844 ... Wait Until Keyword Succeeds 60s 2s
845 ... Check Ping False ${dst['dp_iface_ip_qinq']} ${src['dp_iface_name']}
846 ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']}
847 ... ${src['container_name']}
848 # Remove Subscriber Access (To replicate ATT workflow)
TorstenThieme4e2168e2021-06-22 14:01:47 +0000849 ... AND Wait Until Keyword Succeeds ${timeout} 2s Execute ONOS CLI Command use single connection
850 ... ${ONOS_SSH_IP} ${ONOS_SSH_PORT} volt-remove-subscriber-access ${of_id} ${onu_port}
Hardik Windlass223a1732021-07-09 05:21:40 +0000851 # Additional Sleep to let subscriber delete process
852 ... AND Sleep 5s
Hardik Windlass16cdf962020-04-29 15:26:50 +0530853 ... ELSE
854 ... Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure
855 ... Wait Until Keyword Succeeds 60s 2s
856 ... Check Ping True ${dst['dp_iface_ip_qinq']} ${src['dp_iface_name']}
857 ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']}
858 ... ${src['container_name']}
Hardik Windlass16cdf962020-04-29 15:26:50 +0530859 END
860
861Validate ONUs for PON OLT Enable
Hardik Windlass41701e82021-01-12 17:44:44 +0000862 [Arguments] ${olt_sn} ${olt_peer_list}
Hardik Windlass16cdf962020-04-29 15:26:50 +0530863 [Documentation] This keyword validates Ping succeeds for all Enabled/Acitve OLT PON ports
864 ... Also performs Auth/subscriberAdd/DHCP/Ping for the ONUs on Re-Enabled OLT PON port
Suchitra Vemuria6879aa2020-11-03 11:03:11 -0800865 FOR ${I} IN RANGE 0 ${num_all_onus}
Hardik Windlass16cdf962020-04-29 15:26:50 +0530866 ${src}= Set Variable ${hosts.src[${I}]}
867 ${dst}= Set Variable ${hosts.dst[${I}]}
Hardik Windlass41701e82021-01-12 17:44:44 +0000868 Continue For Loop If "${olt_sn}"!="${src['olt']}"
Hardik Windlass16cdf962020-04-29 15:26:50 +0530869 ${onu_device_id}= Get Device ID From SN ${src['onu']}
Hardik Windlass41701e82021-01-12 17:44:44 +0000870 ${of_id}= Wait Until Keyword Succeeds ${timeout} 15s Validate OLT Device in ONOS ${src['olt']}
TorstenThiemedda37652021-11-11 16:22:05 +0000871 ${nni_port}= Wait Until Keyword Succeeds ${timeout} 2s Get NNI Port in ONOS ${of_id}
Hardik Windlass16cdf962020-04-29 15:26:50 +0530872 ${onu_port}= Wait Until Keyword Succeeds ${timeout} 2s Get ONU Port in ONOS ${src['onu']}
Hardik Windlass1ed2eee2021-06-25 09:51:03 +0000873 ... ${of_id} ${src['uni_id']}
Hardik Windlass16cdf962020-04-29 15:26:50 +0530874 ${matched}= Match ONU in PON OLT Peer List ${olt_peer_list} ${onu_device_id}
875 ${wpa_log}= Run Keyword If ${has_dataplane} and ${matched} Catenate SEPARATOR=.
876 ... /tmp/wpa ${src['dp_iface_name']} log
877 Run Keyword If ${matched}
878 ... Run Keywords
879 # Perform Cleanup
880 ... Run Keyword If ${has_dataplane} Clean Up Linux ${onu_device_id}
881 # Verify ONU port status
882 ... AND Run Keyword And Continue On Failure Wait Until Keyword Succeeds 120s 2s
Hardik Windlass39015672021-07-05 05:48:08 +0000883 ... Verify UNI Port Is Enabled ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${src['onu']} ${src['uni_id']}
Hardik Windlass16cdf962020-04-29 15:26:50 +0530884 # Verify EAPOL flows are added for the ONU port
885 ... AND Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s
Matteo Scandolo7e519fb2021-08-13 11:35:16 -0700886 ... Verify Eapol Flows Added For ONU ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${of_id} ${onu_port}
Hardik Windlass16cdf962020-04-29 15:26:50 +0530887 # Verify ONU state in voltha
888 ... AND Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
889 ... Validate Device ENABLED ACTIVE REACHABLE
890 ... ${src['onu']} onu=True onu_reason=omci-flows-pushed
891 # Perform Authentication
892 ... AND Run Keyword If ${has_dataplane}
893 ... Run Keyword And Continue On Failure Validate Authentication True
894 ... ${src['dp_iface_name']} wpa_supplicant.conf ${src['ip']} ${src['user']} ${src['pass']}
895 ... ${src['container_type']} ${src['container_name']} ${wpa_log}
896 ... AND Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2
897 ... Verify ONU in AAA-Users ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${onu_port}
898 ... AND Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2
TorstenThieme4e2168e2021-06-22 14:01:47 +0000899 ... Execute ONOS CLI Command use single connection ${ONOS_SSH_IP} ${ONOS_SSH_PORT}
Hardik Windlass16cdf962020-04-29 15:26:50 +0530900 ... volt-add-subscriber-access ${of_id} ${onu_port}
901 # Verify that no pending flows exist for the ONU port
902 ... AND Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s
903 ... Verify No Pending Flows For ONU ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${onu_port}
904 # Verify subscriber access flows are added for the ONU port
905 ... AND Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
906 ... Verify Subscriber Access Flows Added For ONU ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${of_id}
907 ... ${onu_port} ${nni_port} ${src['c_tag']} ${src['s_tag']}
908 ... AND Run Keyword If ${has_dataplane}
909 ... Run Keyword And Continue On Failure Validate DHCP and Ping True
910 ... True ${src['dp_iface_name']} ${src['s_tag']} ${src['c_tag']} ${dst['dp_iface_ip_qinq']}
911 ... ${src['ip']} ${src['user']} ${src['pass']}
912 ... ${src['container_type']} ${src['container_name']}
913 ... ${dst['dp_iface_name']} ${dst['ip']} ${dst['user']} ${dst['pass']}
914 ... ${dst['container_type']} ${dst['container_name']}
915 ... AND Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s
916 ... Validate Subscriber DHCP Allocation ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${onu_port}
917 ... AND Run Keyword and Ignore Error Get Device Output from Voltha ${onu_device_id}
918 ... ELSE
919 ... Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure
920 ... Wait Until Keyword Succeeds 60s 2s
921 ... Check Ping True ${dst['dp_iface_ip_qinq']} ${src['dp_iface_name']}
922 ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']}
923 ... ${src['container_name']}
Hardik Windlass16cdf962020-04-29 15:26:50 +0530924 END
925
Hardik Windlass41701e82021-01-12 17:44:44 +0000926Disable Enable PON Port Per OLT DT
927 [Arguments] ${olt_serial_number}
928 [Documentation] This keyword disables and then enables OLT PON port and
929 ... also validate ONUs for each corresponding case
930 ${olt_device_id}= Get OLTDeviceID From OLT List ${olt_serial_number}
931 ${olt_pon_port_list}= Retrieve OLT PON Ports ${olt_device_id}
932 ${olt_pon_port_list_len}= Get Length ${olt_pon_port_list}
933 FOR ${INDEX0} IN RANGE 0 ${olt_pon_port_list_len}
934 ${olt_pon_port}= Get From List ${olt_pon_port_list} ${INDEX0}
935 ${olt_peer_list}= Retrieve Peer List From OLT PON Port ${olt_device_id} ${olt_pon_port}
TorstenThieme17d6fd22021-09-23 10:00:08 +0000936 ${olt_peer_list_len}= Get Length ${olt_peer_list}
Hardik Windlass41701e82021-01-12 17:44:44 +0000937 # Disable the OLT PON Port and Validate OLT Device
938 DisableOrEnable OLT PON Port disable ${olt_device_id} ${olt_pon_port}
939 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
940 ... Validate OLT PON Port Status ${olt_device_id} ${olt_pon_port}
941 ... DISABLED DISCOVERED
942 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
943 ... Validate OLT Device ENABLED ACTIVE REACHABLE
944 ... ${olt_serial_number}
945 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
946 ... Validate ONUs for PON OLT Disable DT ${olt_serial_number} ${olt_peer_list}
Hardik Windlass41701e82021-01-12 17:44:44 +0000947 # Enable the OLT PON Port back, and check ONU status are back to "ACTIVE"
948 DisableOrEnable OLT PON Port enable ${olt_device_id} ${olt_pon_port}
949 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
950 ... Validate OLT PON Port Status ${olt_device_id} ${olt_pon_port}
951 ... ENABLED ACTIVE
TorstenThieme17d6fd22021-09-23 10:00:08 +0000952 ${olt_peer_list_new}= Wait Until Keyword Succeeds ${timeout} 5s
953 ... Retrieve Peer List From OLT PON Port ${olt_device_id} ${olt_pon_port} ${olt_peer_list_len}
Hardik Windlass41701e82021-01-12 17:44:44 +0000954 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
955 ... Validate ONUs for PON OLT Enable DT ${olt_serial_number} ${olt_peer_list_new}
956 END
957
Hardik Windlass16cdf962020-04-29 15:26:50 +0530958Validate ONUs for PON OLT Disable DT
Hardik Windlass41701e82021-01-12 17:44:44 +0000959 [Arguments] ${olt_sn} ${olt_peer_list}
Hardik Windlass16cdf962020-04-29 15:26:50 +0530960 [Documentation] This keyword validates that Ping fails for ONUs connected to Disabled OLT PON port
961 ... And Pings succeed for other Active OLT PON port ONUs
962 ... Also it removes subscriber and deletes ONUs for Disabled OLT PON port to replicate DT workflow
Suchitra Vemuria6879aa2020-11-03 11:03:11 -0800963 FOR ${I} IN RANGE 0 ${num_all_onus}
Hardik Windlass16cdf962020-04-29 15:26:50 +0530964 ${src}= Set Variable ${hosts.src[${I}]}
965 ${dst}= Set Variable ${hosts.dst[${I}]}
Hardik Windlass41701e82021-01-12 17:44:44 +0000966 Continue For Loop If "${olt_sn}"!="${src['olt']}"
Hardik Windlass16cdf962020-04-29 15:26:50 +0530967 ${onu_device_id}= Get Device ID From SN ${src['onu']}
Hardik Windlass41701e82021-01-12 17:44:44 +0000968 ${of_id}= Wait Until Keyword Succeeds ${timeout} 15s Validate OLT Device in ONOS ${src['olt']}
Hardik Windlass16cdf962020-04-29 15:26:50 +0530969 ${onu_port}= Wait Until Keyword Succeeds ${timeout} 2s Get ONU Port in ONOS ${src['onu']}
970 ... ${of_id}
971 ${matched}= Match ONU in PON OLT Peer List ${olt_peer_list} ${onu_device_id}
Girish Gowdra3f0fadb2021-11-08 16:49:28 -0800972 ${valid_onu_states}= Create List stopping-openomci omci-flows-deleted
Hardik Windlass16cdf962020-04-29 15:26:50 +0530973 Run Keyword If ${matched}
974 ... Run Keywords
975 ... Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
976 ... Validate Device ENABLED DISCOVERED
Girish Gowdra3f0fadb2021-11-08 16:49:28 -0800977 ... UNREACHABLE ${src['onu']} onu=True onu_reason=${valid_onu_states}
Hardik Windlass16cdf962020-04-29 15:26:50 +0530978 ... AND Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s
Hardik Windlass39015672021-07-05 05:48:08 +0000979 ... Verify UNI Port Is Disabled ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${src['onu']}
Hardik Windlass16cdf962020-04-29 15:26:50 +0530980 ... AND Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure
981 ... Wait Until Keyword Succeeds 60s 2s
982 ... Check Ping False ${dst['dp_iface_ip_qinq']} ${src['dp_iface_name']}
983 ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']}
984 ... ${src['container_name']}
985 # Remove Subscriber Access (To replicate DT workflow)
TorstenThieme4e2168e2021-06-22 14:01:47 +0000986 ... AND Wait Until Keyword Succeeds ${timeout} 2s Execute ONOS CLI Command use single connection
987 ... ${ONOS_SSH_IP} ${ONOS_SSH_PORT} volt-remove-subscriber-access ${of_id} ${onu_port}
Hardik Windlass16cdf962020-04-29 15:26:50 +0530988 # Delete ONU Device (To replicate DT workflow)
989 ... AND Delete Device ${onu_device_id}
Hardik Windlass223a1732021-07-09 05:21:40 +0000990 # Additional Sleep to let subscriber and ONU delete process
991 ... AND Sleep 10s
Hardik Windlass16cdf962020-04-29 15:26:50 +0530992 ... ELSE
993 ... Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure
994 ... Wait Until Keyword Succeeds 60s 2s
995 ... Check Ping True ${dst['dp_iface_ip_qinq']} ${src['dp_iface_name']}
996 ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']}
997 ... ${src['container_name']}
Hardik Windlass16cdf962020-04-29 15:26:50 +0530998 END
999
1000Validate ONUs for PON OLT Enable DT
Hardik Windlass41701e82021-01-12 17:44:44 +00001001 [Arguments] ${olt_sn} ${olt_peer_list}
Hardik Windlass16cdf962020-04-29 15:26:50 +05301002 [Documentation] This keyword validates Ping succeeds for all Enabled/Acitve OLT PON ports
1003 ... Also performs subscriberAdd/DHCP/Ping for the ONUs on Re-Enabled OLT PON port
Suchitra Vemuria6879aa2020-11-03 11:03:11 -08001004 FOR ${I} IN RANGE 0 ${num_all_onus}
Hardik Windlass16cdf962020-04-29 15:26:50 +05301005 ${src}= Set Variable ${hosts.src[${I}]}
1006 ${dst}= Set Variable ${hosts.dst[${I}]}
Hardik Windlass41701e82021-01-12 17:44:44 +00001007 Continue For Loop If "${olt_sn}"!="${src['olt']}"
Hardik Windlass16cdf962020-04-29 15:26:50 +05301008 ${onu_device_id}= Get Device ID From SN ${src['onu']}
Hardik Windlass41701e82021-01-12 17:44:44 +00001009 ${of_id}= Wait Until Keyword Succeeds ${timeout} 15s Validate OLT Device in ONOS ${src['olt']}
TorstenThiemedda37652021-11-11 16:22:05 +00001010 ${nni_port}= Wait Until Keyword Succeeds ${timeout} 2s Get NNI Port in ONOS ${of_id}
Hardik Windlass16cdf962020-04-29 15:26:50 +05301011 ${onu_port}= Wait Until Keyword Succeeds ${timeout} 2s Get ONU Port in ONOS ${src['onu']}
1012 ... ${of_id}
1013 ${matched}= Match ONU in PON OLT Peer List ${olt_peer_list} ${onu_device_id}
1014 Run Keyword If ${matched}
1015 ... Run Keywords
1016 # Perform Cleanup
1017 ... Run Keyword If ${has_dataplane} Clean Up Linux ${onu_device_id}
1018 # Verify ONU port status
1019 ... AND Run Keyword And Continue On Failure Wait Until Keyword Succeeds 120s 2s
Hardik Windlass39015672021-07-05 05:48:08 +00001020 ... Verify UNI Port Is Enabled ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${src['onu']}
Hardik Windlass16cdf962020-04-29 15:26:50 +05301021 ... AND Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2
TorstenThieme4e2168e2021-06-22 14:01:47 +00001022 ... Execute ONOS CLI Command use single connection ${ONOS_SSH_IP} ${ONOS_SSH_PORT}
Hardik Windlass16cdf962020-04-29 15:26:50 +05301023 ... volt-add-subscriber-access ${of_id} ${onu_port}
1024 # Verify ONU state in voltha
1025 ... AND Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
1026 ... Validate Device ENABLED ACTIVE REACHABLE
1027 ... ${src['onu']} onu=True onu_reason=omci-flows-pushed
1028 # Verify subscriber access flows are added for the ONU port
1029 ... AND Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
1030 ... Verify Subscriber Access Flows Added For ONU DT ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${of_id}
1031 ... ${onu_port} ${nni_port} ${src['s_tag']}
1032 ... AND Run Keyword If ${has_dataplane}
1033 ... Run Keyword And Continue On Failure Validate DHCP and Ping True
1034 ... True ${src['dp_iface_name']} ${src['s_tag']} ${src['c_tag']} ${dst['dp_iface_ip_qinq']}
1035 ... ${src['ip']} ${src['user']} ${src['pass']}
1036 ... ${src['container_type']} ${src['container_name']}
1037 ... ${dst['dp_iface_name']} ${dst['ip']} ${dst['user']} ${dst['pass']}
1038 ... ${dst['container_type']} ${dst['container_name']}
1039 ... ELSE
1040 ... Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure
1041 ... Wait Until Keyword Succeeds 60s 2s
1042 ... Check Ping True ${dst['dp_iface_ip_qinq']} ${src['dp_iface_name']}
1043 ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']}
1044 ... ${src['container_name']}
Hardik Windlass16cdf962020-04-29 15:26:50 +05301045 END
1046
1047Match ONU in PON OLT Peer List
1048 [Arguments] ${olt_peer_list} ${onu_device_id}
1049 [Documentation] This keyword matches if ONU device is present in OLT PON port peer list
1050 ${matched}= Set Variable False
1051 FOR ${olt_peer} IN @{olt_peer_list}
1052 ${matched}= Set Variable If '${onu_device_id}' == '${olt_peer}' True False
1053 Exit For Loop If ${matched}
1054 END
1055 [Return] ${matched}
1056
Gayathri.Selvanb6a2b542020-01-24 07:24:23 +00001057Collect Logs
1058 [Documentation] Collect Logs from voltha and onos cli for various commands
1059 Run Keyword and Ignore Error Get Device List from Voltha
Suchitra Vemuria6879aa2020-11-03 11:03:11 -08001060 FOR ${I} IN RANGE 0 ${num_olts}
Suchitra Vemuria6879aa2020-11-03 11:03:11 -08001061 Run Keyword and Ignore Error Get Device Output from Voltha ${olt_ids}[${I}][device_id]
1062 Run Keyword and Ignore Error Get Logical Device Output from Voltha ${olt_ids}[${I}][logical_id]
1063 END
1064 #Run Keyword and Ignore Error Get Device Output from Voltha ${olt_device_id}
1065 #Run Keyword and Ignore Error Get Logical Device Output from Voltha ${logical_id}
ubuntu6b6e7d42020-03-02 12:35:42 -08001066 Get ONOS Status ${ONOS_SSH_IP} ${ONOS_SSH_PORT}
Gayathri.Selvanf68ea4b2020-02-03 07:36:39 +00001067
1068Verify ping is succesful except for given device
1069 [Arguments] ${num_onus} ${exceptional_onu_id}
1070 [Documentation] Checks that ping for all the devices are successful except the given ONU.
1071 ${pingStatus} Set Variable True
Suchitra Vemuria6879aa2020-11-03 11:03:11 -08001072 FOR ${I} IN RANGE 0 ${num_all_onus}
Gayathri.Selvanf68ea4b2020-02-03 07:36:39 +00001073 ${src}= Set Variable ${hosts.src[${I}]}
1074 ${dst}= Set Variable ${hosts.dst[${I}]}
1075 ${onu_device_id}= Get Device ID From SN ${src['onu']}
1076 ${pingStatus} Run Keyword If '${onu_device_id}' == '${exceptional_onu_id}' Set Variable False
Suchitra Vemuri69bcad22020-12-09 11:11:14 -08001077 Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure
1078 ... Wait Until Keyword Succeeds 60s 2s
Gayathri.Selvanf68ea4b2020-02-03 07:36:39 +00001079 ... Check Ping ${pingStatus} ${dst['dp_iface_ip_qinq']} ${src['dp_iface_name']}
1080 ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
1081 END
Andy Bavier4a8450e2020-02-04 08:58:37 -07001082
Suchitra Vemurife309412020-12-01 19:19:52 -08001083Verify ping is successful for ONUs not on this OLT
1084 [Arguments] ${num_all_onus} ${exceptional_olt_id}
1085 [Documentation] Checks that pings work for all the ONUs except for the ONUs on the given OLT.
1086 #${pingStatus} Set Variable True
1087 FOR ${I} IN RANGE 0 ${num_all_onus}
1088 ${src}= Set Variable ${hosts.src[${I}]}
1089 ${dst}= Set Variable ${hosts.dst[${I}]}
1090 ${olt_device_id}= Get Device ID From SN ${src['olt']}
1091 Continue For Loop If "${olt_device_id}"=="${exceptional_olt_id}"
1092 #${pingStatus} Run Keyword If '${olt_device_id}' == '${exceptional_olt_id}' Set Variable False
Suchitra Vemuri69bcad22020-12-09 11:11:14 -08001093 Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure
1094 ... Wait Until Keyword Succeeds 60s 2s
Suchitra Vemurife309412020-12-01 19:19:52 -08001095 ... Check Ping True ${dst['dp_iface_ip_qinq']} ${src['dp_iface_name']}
1096 ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
1097 END
1098
Andy Bavier1923ecc2020-06-18 14:06:40 -07001099Echo Message to OLT Logs
1100 [Arguments] ${message}
1101 [Documentation] Echoes ${message} into the OLT logs
Suchitra Vemuria6879aa2020-11-03 11:03:11 -08001102 FOR ${I} IN RANGE 0 ${num_olts}
1103 ${olt_user} Evaluate ${olts}[${I}].get("user")
1104 ${olt_pass} Evaluate ${olts}[${I}].get("pass")
1105 ${olt_ssh_ip} Evaluate ${olts}[${I}].get("sship")
Andrea Campanellaebf6f0d2021-01-12 13:10:29 +01001106 Continue For Loop If "${olt_user}" == "${None}"
1107 Continue For Loop If "${olt_pass}" == "${None}"
Suchitra Vemuria6879aa2020-11-03 11:03:11 -08001108 Wait Until Keyword Succeeds 180s 10s Execute Remote Command
1109 ... printf '%s\n' '' '' '${message}' '' >> /var/log/openolt.log
1110 ... ${olt_ssh_ip} ${olt_user} ${olt_pass}
1111 Wait Until Keyword Succeeds 180s 10s Execute Remote Command
1112 ... printf '%s\n' '' '' '${message}' '' >> /var/log/dev_mgmt_daemon.log
1113 ... ${olt_ssh_ip} ${olt_user} ${olt_pass}
1114 Wait Until Keyword Succeeds 180s 10s Execute Remote Command
1115 ... printf '%s\n' '' '' '${message}' '' >> /var/log/openolt_process_watchdog.log
1116 ... ${olt_ssh_ip} ${olt_user} ${olt_pass}
1117 END
Andy Bavier1923ecc2020-06-18 14:06:40 -07001118
Andy Bavierabeba262020-02-07 16:22:16 -07001119Start Logging
1120 [Arguments] ${label}
1121 [Documentation] Start logging for test ${label}
Hardik Windlass9e3db232021-10-14 07:10:47 +00001122 ${kail_process}= Run Keyword If "${container_log_dir}" != "${None}" Start Process kail -n ${NAMESPACE}
Matteo Scandolo6b524122021-10-22 14:34:29 -07001123 ... -n ${INFRA_NAMESPACE} cwd=${container_log_dir} stdout=${label}-combined.log
Andy Bavierabeba262020-02-07 16:22:16 -07001124 Set Test Variable ${kail_process}
Andy Bavier1923ecc2020-06-18 14:06:40 -07001125 Run Keyword If ${has_dataplane} Echo Message to OLT Logs START ${label}
Andy Bavierabeba262020-02-07 16:22:16 -07001126
Andrea Campanella82add372021-11-05 12:01:15 +01001127Start Logging Setup or Teardown
1128 [Arguments] ${label}
1129 [Documentation] Start logging for suite ${label}
1130 ${kail_process}= Run Keyword If "${container_log_dir}" != "${None}" Start Process kail -n ${NAMESPACE}
1131 ... -n ${INFRA_NAMESPACE} cwd=${container_log_dir} stdout=${label}-combined.log
1132 Set Suite Variable ${kail_process}
1133 Run Keyword If ${has_dataplane} Echo Message to OLT Logs START ${label}
1134
1135Stop Logging Setup or Teardown
1136 [Arguments] ${label}
1137 [Documentation] End logging for suite;
1138 Run sync
1139 Run Keyword If ${kail_process} Terminate Process ${kail_process}
1140 ${test_logfile}= Run Keyword If "${container_log_dir}" != "${None}"
1141 ... Join Path ${container_log_dir} ${label}-combined.log
1142 Run Keyword If ${has_dataplane} Echo Message to OLT Logs END ${label}
1143
Andy Bavierabeba262020-02-07 16:22:16 -07001144Stop Logging
1145 [Arguments] ${label}
Matteo Scandoloda1c64b2021-07-20 10:14:49 -07001146 [Documentation] End logging for test; remove logfile if test passed and ${logging} is set to False
Andy Bavierabeba262020-02-07 16:22:16 -07001147 Run sync
1148 Run Keyword If ${kail_process} Terminate Process ${kail_process}
1149 ${test_logfile}= Run Keyword If "${container_log_dir}" != "${None}"
1150 ... Join Path ${container_log_dir} ${label}-combined.log
Matteo Scandoloda1c64b2021-07-20 10:14:49 -07001151 Run Keyword If Test Passed
1152 ... Run Keyword If "${logging}" == "False"
1153 ... Run Keyword If "${test_logfile}" != "${None}"
1154 ... Remove File ${test_logfile}
Andy Bavier1923ecc2020-06-18 14:06:40 -07001155 Run Keyword If ${has_dataplane} Echo Message to OLT Logs END ${label}
Andy Bavierabeba262020-02-07 16:22:16 -07001156
Suchitra Vemuria5fa3dd2020-02-04 14:38:49 -08001157Clean Up Linux
1158 [Documentation] Kill processes and clean up interfaces on src+dst servers
Hardik Windlass16cdf962020-04-29 15:26:50 +05301159 [Arguments] ${onu_id}=${EMPTY}
Suchitra Vemuria6879aa2020-11-03 11:03:11 -08001160 FOR ${I} IN RANGE 0 ${num_all_onus}
Suchitra Vemuria5fa3dd2020-02-04 14:38:49 -08001161 ${src}= Set Variable ${hosts.src[${I}]}
1162 ${dst}= Set Variable ${hosts.dst[${I}]}
Hardik Windlass16cdf962020-04-29 15:26:50 +05301163 ${onu_device_id}= Get Device ID From SN ${src['onu']}
1164 Continue For Loop If '${onu_id}' != '${EMPTY}' and '${onu_id}' != '${onu_device_id}'
Andy Bavier84b83282020-06-30 05:47:49 -07001165 Execute Remote Command sudo pkill wpa_supplicant ${src['ip']}
Suchitra Vemuria5fa3dd2020-02-04 14:38:49 -08001166 ... ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
Andy Bavier84b83282020-06-30 05:47:49 -07001167 Execute Remote Command sudo pkill dhclient ${src['ip']}
Suchitra Vemuria5fa3dd2020-02-04 14:38:49 -08001168 ... ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
Andy Baviereff938d2020-06-29 18:27:49 -07001169 Execute Remote Command sudo pkill mausezahn ${src['ip']}
1170 ... ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
1171 Run Keyword If '${dst['ip']}' != '${None}' Execute Remote Command pkill dhcpd
1172 ... ${dst['ip']} ${dst['user']} ${dst['pass']} ${dst['container_type']} ${dst['container_name']}
Suchitra Vemuria5fa3dd2020-02-04 14:38:49 -08001173 Delete IP Addresses from Interface on Remote Host ${src['dp_iface_name']} ${src['ip']}
1174 ... ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
1175 Run Keyword If '${dst['ip']}' != '${None}' Delete Interface on Remote Host
1176 ... ${dst['dp_iface_name']}.${src['s_tag']} ${dst['ip']} ${dst['user']} ${dst['pass']}
1177 ... ${dst['container_type']} ${dst['container_name']}
Andy Bavier84b83282020-06-30 05:47:49 -07001178 ${bng_ip}= Get Variable Value ${dst['noroot_ip']}
1179 ${bng_user}= Get Variable Value ${dst['noroot_user']}
1180 ${bng_pass}= Get Variable Value ${dst['noroot_pass']}
Andy Bavierf4b7d1d2020-06-30 11:14:04 -07001181 Run Keyword If "${bng_ip}" != "${NONE}" and "${bng_user}" != "${NONE}" and "${bng_pass}" != "${NONE}"
1182 ... Execute Remote Command sudo pkill mausezahn ${bng_ip} ${bng_user} ${bng_pass}
Andy Baviereff938d2020-06-29 18:27:49 -07001183 ... ${dst['container_type']} ${dst['container_name']}
Suchitra Vemuria5fa3dd2020-02-04 14:38:49 -08001184 END
Scott Baker60e570d2020-02-02 22:10:13 -08001185
Suchitra Vemuria6879aa2020-11-03 11:03:11 -08001186Clean Up Linux Per OLT
1187 [Documentation] Kill processes and clean up interfaces on src+dst servers
1188 [Arguments] ${olt_serial_number}
1189 FOR ${I} IN RANGE 0 ${num_all_onus}
1190 ${src}= Set Variable ${hosts.src[${I}]}
1191 ${dst}= Set Variable ${hosts.dst[${I}]}
1192 ${onu_device_id}= Get Device ID From SN ${src['onu']}
1193 ${sn}= Get Device ID From SN ${src['olt']}
1194 #Continue For Loop If '${onu_id}' != '${EMPTY}' and '${onu_id}' != '${onu_device_id}'
1195 Continue For Loop If '${olt_serial_number}' == '${sn}'
1196 Execute Remote Command sudo pkill wpa_supplicant ${src['ip']}
1197 ... ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
1198 Execute Remote Command sudo pkill dhclient ${src['ip']}
1199 ... ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
1200 Execute Remote Command sudo pkill mausezahn ${src['ip']}
1201 ... ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
1202 Run Keyword If '${dst['ip']}' != '${None}' Execute Remote Command pkill dhcpd
1203 ... ${dst['ip']} ${dst['user']} ${dst['pass']} ${dst['container_type']} ${dst['container_name']}
1204 Delete IP Addresses from Interface on Remote Host ${src['dp_iface_name']} ${src['ip']}
1205 ... ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
1206 Run Keyword If '${dst['ip']}' != '${None}' Delete Interface on Remote Host
1207 ... ${dst['dp_iface_name']}.${src['s_tag']} ${dst['ip']} ${dst['user']} ${dst['pass']}
1208 ... ${dst['container_type']} ${dst['container_name']}
1209 ${bng_ip}= Get Variable Value ${dst['noroot_ip']}
1210 ${bng_user}= Get Variable Value ${dst['noroot_user']}
1211 ${bng_pass}= Get Variable Value ${dst['noroot_pass']}
1212 Run Keyword If "${bng_ip}" != "${NONE}" and "${bng_user}" != "${NONE}" and "${bng_pass}" != "${NONE}"
1213 ... Execute Remote Command sudo pkill mausezahn ${bng_ip} ${bng_user} ${bng_pass}
1214 ... ${dst['container_type']} ${dst['container_name']}
1215 END
1216
Suchitra Vemuri8d3b0032020-09-11 17:49:08 -07001217Clean dhclient
1218 [Documentation] Kills dhclient processes only for all RGs
Hardik Windlass41701e82021-01-12 17:44:44 +00001219 FOR ${I} IN RANGE 0 ${num_all_onus}
Suchitra Vemuri8d3b0032020-09-11 17:49:08 -07001220 ${src}= Set Variable ${hosts.src[${I}]}
1221 ${dst}= Set Variable ${hosts.dst[${I}]}
1222 Execute Remote Command sudo pkill dhclient ${src['ip']}
1223 ... ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
1224 END
1225
Suchitra Vemurif7a033c2020-02-26 17:22:41 -08001226Clean WPA Process
1227 [Documentation] Kills wpa_supplicant processes only for all RGs
Suchitra Vemuria6879aa2020-11-03 11:03:11 -08001228 FOR ${I} IN RANGE 0 ${num_all_onus}
Suchitra Vemurif7a033c2020-02-26 17:22:41 -08001229 ${src}= Set Variable ${hosts.src[${I}]}
1230 ${dst}= Set Variable ${hosts.dst[${I}]}
1231 Run Keyword And Ignore Error Kill Linux Process [w]pa_supplicant ${src['ip']}
1232 ... ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
1233 END
1234
Scott Baker60e570d2020-02-02 22:10:13 -08001235Should Be Larger Than
1236 [Documentation] Verify that value_1 is > value_2
1237 [Arguments] ${value_1} ${value_2}
1238 Run Keyword If ${value_1} <= ${value_2}
1239 ... Fail The value ${value_1} is not larger than ${value_2}
1240
Scott Bakeree675552020-02-11 10:43:34 -08001241Should Be Larger Than Or Equal To
1242 [Documentation] Verify that value_1 is >= value_2
1243 [Arguments] ${value_1} ${value_2}
1244 Run Keyword If ${value_1} < ${value_2}
1245 ... Fail The value ${value_1} is not larger than or equal to ${value_2}
1246
Scott Baker60e570d2020-02-02 22:10:13 -08001247Should Be Float
1248 [Documentation] Verify that value is a floating point number type
1249 [Arguments] ${value}
1250 ${type} Evaluate type(${value}).__name__
1251 Should Be Equal ${type} float
1252
Scott Bakeree675552020-02-11 10:43:34 -08001253Should Be Newer Than Or Equal To
1254 [Documentation] Compare two RFC3339 dates
1255 [Arguments] ${value_1} ${value_2}
1256 ${unix_v1} Parse RFC3339 ${value_1}
1257 ${unix_v2} Parse RFC3339 ${value_2}
1258 Run Keyword If ${unix_v1} < ${unix_v2}
1259 ... Fail The value ${value_1} is not newer than or equal to ${value_2}
1260
Scott Baker60e570d2020-02-02 22:10:13 -08001261Get Current Time
1262 [Documentation] Return the current time in RFC3339 format
1263 ${output}= Run date -u +"%FT%T%:z"
1264 [return] ${output}
Scott Bakeree675552020-02-11 10:43:34 -08001265
1266Parse RFC3339
1267 [Documentation] Parse an RFC3339 timestamp
1268 [Arguments] ${dateStr}
1269 ${rc} ${output}= Run and Return Rc and Output date --date="${dateStr}" "+%s"
1270 Should Be Equal As Numbers ${rc} 0
1271 [return] ${output}
Matteo Scandolo142e6272020-04-29 17:36:59 -07001272
Gayathri.Selvan92d16862020-03-19 14:47:58 +00001273Get Bandwidth Profile Name For Given Subscriber
Hardik Windlass35db2aa2021-06-03 12:41:26 +00001274 [Arguments] ${subscriber_id} ${stream_type}=upstreamBandwidthProfile ${service_type}=${EMPTY}
Gayathri.Selvan92d16862020-03-19 14:47:58 +00001275 [Documentation] Keyword to get the bandwidth details of the given subscriber
Hardik Windlass35db2aa2021-06-03 12:41:26 +00001276 ${service_type_upper}= Run Keyword If '${service_type}' != '${EMPTY}'
1277 ... Convert To Upper Case ${service_type}
1278 ${bandwidth_profile_output}= Run Keyword If '${service_type}' != '${EMPTY}'
TorstenThieme4e2168e2021-06-22 14:01:47 +00001279 ... Execute ONOS CLI Command use single connection ${ONOS_SSH_IP} ${ONOS_SSH_PORT}
Hardik Windlass1189a642021-06-04 03:25:23 +00001280 ... volt-programmed-subscribers | grep ${subscriber_id} | grep '${service_type_upper}' --color=never
Hardik Windlass35db2aa2021-06-03 12:41:26 +00001281 ... ELSE
TorstenThieme4e2168e2021-06-22 14:01:47 +00001282 ... Execute ONOS CLI Command use single connection ${ONOS_SSH_IP} ${ONOS_SSH_PORT}
Gayathri.Selvan92d16862020-03-19 14:47:58 +00001283 ... volt-programmed-subscribers | grep ${subscriber_id}
1284 @{bandwidth_profile_array}= Split String ${bandwidth_profile_output} ,
1285 Log ${bandwidth_profile_array}
1286 FOR ${value} IN @{bandwidth_profile_array}
1287 @{row_value}= Split String ${value} =
1288 ${bandwidth_profile_name}= Set Variable If '${row_value[0]}' == ' ${stream_type}'
1289 ... ${row_value[1]}
1290 ${bandwidth_profile_name}= Convert To String ${bandwidth_profile_name}
1291 Run Keyword If "${bandwidth_profile_name}" != "None" Exit For Loop
1292 END
1293 Log ${bandwidth_profile_name}
1294 [Return] ${bandwidth_profile_name}
1295
1296Execute Remote Command
1297 [Documentation] SSH into a remote host and execute a command on the bare host or in a container.
1298 ... This replaces and simplifies the Login And Run Command On Remote System keyword in CORDRobot.
1299 [Arguments] ${cmd} ${ip} ${user} ${pass}=${None}
Andy Baviereff938d2020-06-29 18:27:49 -07001300 ... ${container_type}=${None} ${container_name}=${None} ${timeout}=${None}
Gayathri.Selvan92d16862020-03-19 14:47:58 +00001301 ${conn_id}= SSHLibrary.Open Connection ${ip}
1302 Run Keyword If '${pass}' != '${None}'
1303 ... SSHLibrary.Login ${user} ${pass}
1304 ... ELSE
1305 ... SSHLibrary.Login With Public Key ${user} %{HOME}/.ssh/id_rsa
1306 ${namespace}= Run Keyword If '${container_type}' == 'K8S' SSHLibrary.Execute Command
1307 ... kubectl get pods --all-namespaces | grep ${container_name} | awk '{print $1}'
Andy Bavierf6ab19c2020-05-14 10:34:47 -07001308 ${stdout} ${stderr} ${rc}= Run Keyword If '${container_type}' == 'LXC'
1309 ... SSHLibrary.Execute Command lxc exec ${container_name} -- ${cmd}
Andy Baviereff938d2020-06-29 18:27:49 -07001310 ... return_stderr=True return_rc=True timeout=${timeout}
Gayathri.Selvan92d16862020-03-19 14:47:58 +00001311 ... ELSE IF '${container_type}' == 'K8S'
Andy Bavierf6ab19c2020-05-14 10:34:47 -07001312 ... SSHLibrary.Execute Command kubectl -n ${namespace} exec ${container_name} -- ${cmd}
Andy Baviereff938d2020-06-29 18:27:49 -07001313 ... return_stderr=True return_rc=True timeout=${timeout}
Gayathri.Selvan92d16862020-03-19 14:47:58 +00001314 ... ELSE
Andy Baviereff938d2020-06-29 18:27:49 -07001315 ... SSHLibrary.Execute Command ${cmd} return_stderr=True return_rc=True timeout=${timeout}
Andy Bavierf6ab19c2020-05-14 10:34:47 -07001316
1317 Log ${stdout}
1318 Log ${stderr}
1319 Log ${rc}
Gayathri.Selvan92d16862020-03-19 14:47:58 +00001320 SSHLibrary.Close Connection
Andy Bavierf6ab19c2020-05-14 10:34:47 -07001321 [Return] ${stdout} ${stderr} ${rc}
Gayathri.Selvan92d16862020-03-19 14:47:58 +00001322
Suraj Gour33651272020-05-04 10:10:16 +05301323Start Remote Command
1324 [Documentation] SSH into a remote host and execute a command on the bare host or in a container.
1325 ... This replaces and simplifies the Login And Run Command On Remote System keyword in CORDRobot.
1326 [Arguments] ${cmd} ${ip} ${user} ${pass}=${None}
1327 ... ${container_type}=${None} ${container_name}=${None}
1328 ${conn_id}= SSHLibrary.Open Connection ${ip}
1329 Run Keyword If '${pass}' != '${None}'
1330 ... SSHLibrary.Login ${user} ${pass}
1331 ... ELSE
1332 ... SSHLibrary.Login With Public Key ${user} %{HOME}/.ssh/id_rsa
1333 ${namespace}= Run Keyword If '${container_type}' == 'K8S' SSHLibrary.Execute Command
1334 ... kubectl get pods --all-namespaces | grep ${container_name} | awk '{print $1}'
1335 Run Keyword If '${container_type}' == 'LXC'
1336 ... SSHLibrary.Start Command lxc exec ${container_name} -- ${cmd}
1337 ... ELSE IF '${container_type}' == 'K8S'
1338 ... SSHLibrary.Start Command kubectl -n ${namespace} exec ${container_name} -- ${cmd}
1339 ... ELSE
1340 ... SSHLibrary.Start Command ${cmd}
Andy Bavier9fb23232020-06-30 15:12:20 -07001341 # It seems that closing the connection immediately will sometimes kill the command
1342 Sleep 1s
Suraj Gour33651272020-05-04 10:10:16 +05301343 SSHLibrary.Close Connection
1344
Gayathri.Selvan92d16862020-03-19 14:47:58 +00001345Run Iperf3 Test Client
1346 [Arguments] ${src} ${server} ${args}
1347 [Documentation] Login to ${src} and run the iperf3 client against ${server} using ${args}.
1348 ... Return a Dictionary containing the results of the test.
Girish Gowdrad769b412021-05-16 11:09:46 -07001349 ${output} ${stderr} ${rc}= Execute Remote Command iperf3 -J -c ${server} ${args} -l 1024 -M 1350 | jq -M -c '.'
Gayathri.Selvan92d16862020-03-19 14:47:58 +00001350 ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
Andy Bavierf6ab19c2020-05-14 10:34:47 -07001351 Should Be Equal As Integers ${rc} 0
Gayathri.Selvan92d16862020-03-19 14:47:58 +00001352 ${object}= Evaluate json.loads(r'''${output}''') json
1353 [Return] ${object}
Hung-Wei Chiue0bec7c2020-05-29 22:16:56 +00001354
Suchitra Vemuri85cb7d62020-07-16 23:46:16 -07001355Run Iperf Test Client for MCAST
1356 [Arguments] ${src} ${server} ${args}
1357 [Documentation] Login to ${src} and run the iperf client against ${server} using ${args}.
1358 ... Return a Dictionary containing the results of the test.
1359 ${output} ${stderr} ${rc}= Execute Remote Command sudo iperf -c ${server} ${args} | jq -M -c '.'
1360 ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
1361 Should Be Equal As Integers ${rc} 0
1362 ${object}= Evaluate json.loads(r'''${output}''') json
1363 [Return] ${object}
1364
Hardik Windlassd19af862021-08-12 11:40:20 +00001365Run Ping In Background
1366 [Arguments] ${output_file} ${dst_ip} ${iface} ${ip} ${user} ${pass}=${None}
1367 ... ${container_type}=${None} ${container_name}=${None}
1368 [Documentation] Runs the 'ping' on remote system in background and stores the result in a file
1369 ${result}= Login And Run Command On Remote System
Hardik Windlass4e0e7c12021-08-26 08:07:35 +00001370 ... echo "ping -I ${iface} ${dst_ip} > ${output_file} &" > ping.sh; chmod +x ping.sh; ./ping.sh
Hardik Windlassd19af862021-08-12 11:40:20 +00001371 ... ${ip} ${user} ${pass} ${container_type} ${container_name}
1372 Log ${result}
1373
1374Stop Ping Running In Background
1375 [Arguments] ${ip} ${user} ${pass}=${None}
1376 ... ${container_type}=${None} ${container_name}=${None}
1377 [Documentation] Stops the 'ping' running in background on remote system
Hardik Windlassa04efa52021-08-13 08:17:24 +00001378 ${cmd}= Run Keyword If '${container_type}' == 'LXC' or '${container_type}' == 'K8S'
1379 ... Set Variable kill -SIGINT `pgrep ping`
1380 ... ELSE
1381 ... Set Variable sudo kill -SIGINT `pgrep ping`
Hardik Windlassd19af862021-08-12 11:40:20 +00001382 ${result}= Login And Run Command On Remote System
Hardik Windlassa04efa52021-08-13 08:17:24 +00001383 ... ${cmd} ${ip} ${user} ${pass} ${container_type} ${container_name}
Hardik Windlassd19af862021-08-12 11:40:20 +00001384 Log ${result}
1385
1386Retrieve Remote File Contents
1387 [Documentation] Retrieves the contents of the file on remote system
1388 [Arguments] ${file} ${ip} ${user} ${pass}=${None}
1389 ... ${container_type}=${None} ${container_name}=${None} ${prompt}=~$
1390 ${output}= Login And Run Command On Remote System
1391 ... cat ${file}
1392 ... ${ip} ${user} ${pass} ${container_type} ${container_name} ${prompt}
1393 [Return] ${output}
1394
Hung-Wei Chiue0bec7c2020-05-29 22:16:56 +00001395RestoreONUs
1396 [Documentation] Restore all connected ONUs
Suchitra Vemuria6879aa2020-11-03 11:03:11 -08001397 [Arguments] ${num_all_onus}
1398 FOR ${I} IN RANGE 0 ${num_all_onus}
Hung-Wei Chiue0bec7c2020-05-29 22:16:56 +00001399 ${src}= Set Variable ${hosts.src[${I}]}
Hung-Wei Chiucc6e6552020-06-04 12:57:38 -07001400 ${container_type}= Get Variable Value ${src['container_type']} "null"
1401 ${container_name}= Get Variable Value ${src['container_name']} "null"
Hung-Wei Chiue0bec7c2020-05-29 22:16:56 +00001402 ${onu_type}= Get Variable Value ${src['onu_type']} "null"
Hung-Wei Chiucc6e6552020-06-04 12:57:38 -07001403 #Get ens6f0 from ens6f0.22
1404 ${if_name}= Replace String Using Regexp ${src['dp_iface_name']} \\..* \
Hung-Wei Chiue0bec7c2020-05-29 22:16:56 +00001405 Run Keyword IF '${onu_type}' == 'alpha' AlphaONURestoreDefault ${src['ip']} ${src['user']}
Hung-Wei Chiucc6e6552020-06-04 12:57:38 -07001406 ... ${src['pass']} ${if_name} admin admin ${container_type} ${container_name}
Hung-Wei Chiue0bec7c2020-05-29 22:16:56 +00001407 END
1408
1409AlphaONURestoreDefault
1410 [Documentation] Restore the Alpha ONU to factory setting
1411 [Arguments] ${rg_ip} ${rg_user} ${rg_pass} ${onu_ifname}
Hung-Wei Chiucc6e6552020-06-04 12:57:38 -07001412 ... ${onu_user} ${onu_pass} ${container_type}=${None} ${container_name}=${None}
Hung-Wei Chiue0bec7c2020-05-29 22:16:56 +00001413 ${output}= Login And Run Command On Remote System sudo ifconfig ${onu_ifname} 192.168.1.3/24
Hung-Wei Chiucc6e6552020-06-04 12:57:38 -07001414 ... ${rg_ip} ${rg_user} ${rg_pass} ${container_type} ${container_name}
TorstenThieme70bc5262021-01-19 12:12:55 +00001415 ${cmd} Catenate
Hung-Wei Chiue0bec7c2020-05-29 22:16:56 +00001416 ... (echo open "192.168.1.1"; sleep 1;
1417 ... echo "${onu_user}"; sleep 1;
1418 ... echo "${onu_pass}"; sleep 1;
1419 ... echo "restoredefault"; sleep 1) | telnet
1420 ${output}= Login And Run Command On Remote System ${cmd}
Hung-Wei Chiucc6e6552020-06-04 12:57:38 -07001421 ... ${rg_ip} ${rg_user} ${rg_pass} ${container_type} ${container_name}
Hung-Wei Chiue0bec7c2020-05-29 22:16:56 +00001422 Log To Console ${output}
1423 ${output}= Login And Run Command On Remote System sudo ifconfig ${onu_ifname} 0
Hung-Wei Chiucc6e6552020-06-04 12:57:38 -07001424 ... ${rg_ip} ${rg_user} ${rg_pass} ${container_type} ${container_name}
Suraj Gour33651272020-05-04 10:10:16 +05301425
1426Create traffic with each pbit and capture at other end
1427 [Documentation] Generates upstream traffic using Mausezahn tool
1428 ... with each pbit and validates reception at other end using tcpdump
1429 [Arguments] ${target_ip} ${target_iface} ${src_iface}
Girish Gowdra66cd95d2021-07-08 10:31:54 -07001430 ... ${packet_count} ${packet_type} ${c_vlan} ${s_vlan} ${direction} ${tcpdump_filter}
Suraj Gour33651272020-05-04 10:10:16 +05301431 ... ${dst_ip} ${dst_user} ${dst_pass} ${dst_container_type} ${dst_container_name}
1432 ... ${src_ip} ${src_user} ${src_pass} ${src_container_type} ${src_container_name}
1433 FOR ${pbit} IN RANGE 8
Andy Baviereff938d2020-06-29 18:27:49 -07001434 Execute Remote Command sudo pkill mausezahn
Suraj Gour33651272020-05-04 10:10:16 +05301435 ... ${src_ip} ${src_user} ${src_pass} ${src_container_type} ${src_container_name}
Girish Gowdrabbfbbc32021-05-17 14:36:58 -07001436 ${var1}= Set Variable sudo mausezahn ${src_iface} -B ${target_ip} -c ${packet_count}
Girish Gowdra66cd95d2021-07-08 10:31:54 -07001437 ${var2}= Run Keyword If "${direction}"=="downstream"
1438 ... Set Variable -t ${packet_type} "dp=80, flags=rst, p=aa:aa:aa" -Q ${pbit}:${s_vlan},${pbit}:${c_vlan}
1439 ... ELSE
1440 ... Set Variable -t ${packet_type} "dp=80, flags=rst, p=aa:aa:aa" -Q ${pbit}:${c_vlan}
Suraj Gour33651272020-05-04 10:10:16 +05301441 ${cmd}= Set Variable ${var1} ${var2}
1442 Start Remote Command ${cmd} ${src_ip} ${src_user} ${src_pass}
1443 ... ${src_container_type} ${src_container_name}
1444 ${output} ${stderr} ${rc}= Execute Remote Command
Andy Baviereff938d2020-06-29 18:27:49 -07001445 ... sudo tcpdump -l -U -c 30 -i ${target_iface} -e ${tcpdump_filter}
Suraj Gour33651272020-05-04 10:10:16 +05301446 ... ${dst_ip} ${dst_user} ${dst_pass} ${dst_container_type} ${dst_container_name}
Andy Baviereff938d2020-06-29 18:27:49 -07001447 ... timeout=30 seconds
1448 Execute Remote Command sudo pkill mausezahn
Suraj Gour33651272020-05-04 10:10:16 +05301449 ... ${src_ip} ${src_user} ${src_pass} ${src_container_type} ${src_container_name}
Girish Gowdrabbfbbc32021-05-17 14:36:58 -07001450 Run Keyword If "${tcpdump_filter}"=="tcp"
Girish Gowdraebeca682021-05-18 14:44:41 -07001451 ... Should Match Regexp ${output} , p ${pbit},
Suraj Gour33651272020-05-04 10:10:16 +05301452 END
TorstenThieme70bc5262021-01-19 12:12:55 +00001453
1454Determine Number Of ONU
1455 [Arguments] ${olt_serial_number}=${EMPTY} ${num_onus}=${num_all_onus}
1456 [Documentation] Determine the number of different ONUs for the given OLT taken from host.src
1457 ${onu_list} Create List
1458 FOR ${INDEX} IN RANGE 0 ${num_onus}
1459 Continue For Loop If "${olt_serial_number}"!="${hosts.src[${INDEX}].olt}" and "${olt_serial_number}"!="${EMPTY}"
1460 ${onu_id}= Get Index From List ${onu_list} ${hosts.src[${INDEX}].onu}
1461 Run Keyword If -1 == ${onu_id} Append To List ${onu_list} ${hosts.src[${INDEX}].onu}
1462 END
1463 ${real_num_onus}= Get Length ${onu_list}
1464 [Return] ${real_num_onus}
Hardik Windlass44abec12021-09-27 07:52:33 +00001465
1466Validate Cleanup In ETCD
1467 [Documentation] The keyword verifies that device, ports, flows, meters are all cleared in ETCD
1468 [Arguments] ${namespace}=default ${defaultkvstoreprefix}=voltha_voltha
1469 ${podname}= Set Variable etcd
1470 ${kvstoreprefix}= Get Kv Store Prefix ${defaultkvstoreprefix}
1471 # Log Devices Output and Verify Output Should be Empty
1472 ${commandget}= Catenate
1473 ... /bin/sh -c 'ETCDCTL_API=3 etcdctl get --prefix service/${kvstoreprefix}/devices --keys-only'
1474 ${result}= Exec Pod In Kube ${namespace} ${podname} ${commandget}
1475 Log ${result}
1476 Should Be Empty ${result} Stale Devices Data in Etcd!
1477 # Log Flows Output and Verify Output Should be Empty
1478 ${commandget}= Catenate
1479 ... /bin/sh -c 'ETCDCTL_API=3 etcdctl get --prefix service/${kvstoreprefix}/flows --keys-only'
1480 ${result}= Exec Pod In Kube ${namespace} ${podname} ${commandget}
1481 Log ${result}
1482 Should Be Empty ${result} Stale Flows Data in Etcd!
1483 # Log LogicalDevices Output and Verify Output Should be Empty
1484 ${commandget}= Catenate
1485 ... /bin/sh -c 'ETCDCTL_API=3 etcdctl get --prefix service/${kvstoreprefix}/logical_devices --keys-only'
1486 ${result}= Exec Pod In Kube ${namespace} ${podname} ${commandget}
1487 Log ${result}
1488 Should Be Empty ${result} Stale Logical Devices Data in Etcd!
1489 # Log LogicalFlows Output and Verify Output Should be Empty
1490 ${commandget}= Catenate
1491 ... /bin/sh -c 'ETCDCTL_API=3 etcdctl get --prefix service/${kvstoreprefix}/logical_flows --keys-only'
1492 ${result}= Exec Pod In Kube ${namespace} ${podname} ${commandget}
1493 Log ${result}
1494 Should Be Empty ${result} Stale Logical Flows Data in Etcd!
1495 # Log LogicalMeters Output and Verify Output Should be Empty
1496 ${commandget}= Catenate
1497 ... /bin/sh -c 'ETCDCTL_API=3 etcdctl get --prefix service/${kvstoreprefix}/logical_meters --keys-only'
1498 ${result}= Exec Pod In Kube ${namespace} ${podname} ${commandget}
1499 Log ${result}
1500 Should Be Empty ${result} Stale Logical Meters Data in Etcd!
1501 # Log LogicalPorts Output and Verify Output Should be Empty
1502 ${commandget}= Catenate
1503 ... /bin/sh -c 'ETCDCTL_API=3 etcdctl get --prefix service/${kvstoreprefix}/logical_ports --keys-only'
1504 ${result}= Exec Pod In Kube ${namespace} ${podname} ${commandget}
1505 Log ${result}
1506 Should Be Empty ${result} Stale Logical Ports Data in Etcd!
1507 # Log Openolt Output and Verify Output Should be Empty
1508 ${commandget}= Catenate
1509 ... /bin/sh -c 'ETCDCTL_API=3 etcdctl get --prefix service/${kvstoreprefix}/openolt --keys-only'
1510 ${result}= Exec Pod In Kube ${namespace} ${podname} ${commandget}
1511 Log ${result}
1512 Should Be Empty ${result} Stale Openolt Data in Etcd!
1513 # Log Openonu Output and Verify Output Should be Empty
1514 ${commandget}= Catenate
1515 ... /bin/sh -c 'ETCDCTL_API=3 etcdctl get --prefix service/${kvstoreprefix}/openonu --keys-only'
1516 ${result}= Exec Pod In Kube ${namespace} ${podname} ${commandget}
1517 Log ${result}
1518 Should Be Empty ${result} Stale Openonu Data in Etcd!
1519 # Log Ports Output and Verify Output Should be Empty
1520 ${commandget}= Catenate
1521 ... /bin/sh -c 'ETCDCTL_API=3 etcdctl get --prefix service/${kvstoreprefix}/ports --keys-only'
1522 ${result}= Exec Pod In Kube ${namespace} ${podname} ${commandget}
1523 Log ${result}
1524 Should Be Empty ${result} Stale Ports Data in Etcd!
1525 # Log ResourceInstances Output and Verify Output Should be Empty
1526 ${commandget}= Catenate
1527 ... /bin/sh -c 'ETCDCTL_API=3 etcdctl get --prefix service/${kvstoreprefix}/resource_instances --keys-only'
1528 ${result}= Exec Pod In Kube ${namespace} ${podname} ${commandget}
1529 Log ${result}
1530 Should Be Empty ${result} Stale Resource Instances Data in Etcd!
1531 # Log ResourceManager Output and Verify Output Should be Empty
1532 ${commandget}= Catenate
1533 ... /bin/sh -c 'ETCDCTL_API=3 etcdctl get --prefix service/${kvstoreprefix}/resource_manager --keys-only'
1534 ${result}= Exec Pod In Kube ${namespace} ${podname} ${commandget}
1535 Log ${result}
1536 Should Be Empty ${result} Stale Resource Manager Data in Etcd!