blob: 77c25a55abb6b13ad5be22909be195650c407a11 [file] [log] [blame]
Sergio Slobodrianee4b2bc2017-06-05 10:08:59 -04001#!/bin/bash
2
Sergio Slobodrianee4b2bc2017-06-05 10:08:59 -04003lBlue='\033[1;34m'
4green='\033[0;32m'
5orange='\033[0;33m'
6NC='\033[0m'
7red='\033[0;31m'
8yellow='\033[1;33m'
9dGrey='\033[1;30m'
10lGrey='\033[1;37m'
11lCyan='\033[1;36m'
12wd=`pwd`
13
14
15# Clean up any prior executions
16rm -fr .keys
17rm -f ansible/hosts/cluster
18rm -f ansible/host_vars/*
19
20# Source the configuration information
21. install.cfg
22
Sergio Slobodrian37f4a0e2017-06-14 07:50:01 -040023if [ -z "$hosts" ]; then
24 echo -e "${red}No hosts specifed!!${NC}"
25 echo -e "${red}Did you forget to update the config file ${yellow}installer.cfg${red}?${NC}"
26 exit
27fi
28
Sergio Slobodrianee4b2bc2017-06-05 10:08:59 -040029# Create the key directory
30mkdir .keys
31
32# Create the host list
33echo "[cluster]" > ansible/hosts/cluster
34
35# Silence SSH and avoid prompts
36rm -f ~/.ssh/config
37echo "Host *" > ~/.ssh/config
38echo " StrictHostKeyChecking no" >> ~/.ssh/config
39echo " UserKnownHostsFile /dev/null" >> ~/.ssh/config
40
41sudo cp ~/.ssh/config /root/.ssh/config
42
Sergio Slobodrianee4b2bc2017-06-05 10:08:59 -040043for i in $hosts
44do
45 # Generate the key for the host
46 echo -e "${lBlue}Generating the key-pair for communication with host ${yellow}$i${NC}"
47 ssh-keygen -f ./$i -t rsa -N ''
48 mv $i .keys
49
50 # Generate the pre-configuration script
51 echo -e "${lBlue}Creating the pre-configuration script${NC}"
52 cat <<HERE > bash_login.sh
53#!/bin/bash
54 echo "voltha ALL=(ALL) NOPASSWD:ALL" > tmp
55 sudo chown root.root tmp
56 sudo mv tmp /etc/sudoers.d/voltha
57 sudo mkdir /home/voltha
58 mkdir voltha_ssh
59 ssh-keygen -f ~/voltha_ssh/id_rsa -t rsa -N ''
60 sudo mv voltha_ssh /home/voltha/.ssh
61HERE
62 echo "sudo cat <<HERE > /home/voltha/.ssh/authorized_keys" >> bash_login.sh
63 cat $i.pub >> bash_login.sh
64 echo "HERE" >> bash_login.sh
65 echo "chmod 400 /home/voltha/.ssh/authorized_keys" >> bash_login.sh
66 echo "sudo useradd -b /home -d /home/voltha voltha -s /bin/bash" >> bash_login.sh
67 echo "sudo chown -R voltha.voltha /home/voltha" >> bash_login.sh
68 echo "echo 'voltha:voltha' | sudo chpasswd" >> bash_login.sh
69 echo "rm .bash_login" >> bash_login.sh
70 echo "logout" >> bash_login.sh
71 rm $i.pub
72 # Copy the pre-config file to the VM
73 echo -e "${lBlue}Transfering pre-configuration script to ${yellow}$i${NC}"
74 if [ -d ".test" ]; then
75 echo -e "${red}Test mode set!!${lBlue} Using pre-populated ssh key for ${yellow}$i${NC}"
Sergio Slobodrianc5477712017-06-07 11:56:56 -040076 scp -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -i .test/$i bash_login.sh $iUser@$i:.bash_login
Sergio Slobodrianee4b2bc2017-06-05 10:08:59 -040077 else
Sergio Slobodrianc5477712017-06-07 11:56:56 -040078 scp -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no bash_login.sh $iUser@$i:.bash_login
Sergio Slobodrianee4b2bc2017-06-05 10:08:59 -040079 fi
80 rm bash_login.sh
81
82 # Run the pre-config file on the VM
83 echo -e "${lBlue}Running the pre-configuration script on ${yellow}$i${NC}"
84 if [ -d ".test" ]; then
85 echo -e "${red}Test mode set!!${lBlue} Using pre-populated ssh key for ${yellow}$i${NC}"
Sergio Slobodrianc5477712017-06-07 11:56:56 -040086 ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -i .test/$i $iUser@$i
Sergio Slobodrianee4b2bc2017-06-05 10:08:59 -040087 else
Sergio Slobodrianc5477712017-06-07 11:56:56 -040088 ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no $iUser@$i
Sergio Slobodrianee4b2bc2017-06-05 10:08:59 -040089 fi
90
91 # Configure ansible and ssh for silent operation
92 echo -e "${lBlue}Configuring ansible${NC}"
93 echo $i >> ansible/hosts/cluster
94 echo "ansible_ssh_private_key_file: $wd/.keys/$i" > ansible/host_vars/$i
95
96 # Create the tunnel to the registry to allow pulls from localhost
97 echo -e "${lBlue}Creating a secure shell tunnel to the registry for ${yellow}$i${NC}"
98 ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -i .keys/$i -f voltha@$i -R 5000:localhost:5000 -N
99
100done
101# Add the dependent software list to the cluster variables
102echo -e "${lBlue}Setting up dependent software${NC}"
Sergio Slobodrian263900e2017-06-16 21:39:04 -0400103# Delete any grub updates since the boot disk is almost
104# guaranteed not to be the same device as the installer.
105mkdir grub_updates
106sudo mv deb_files/*grub* grub_updates
Sergio Slobodrianba9cbd82017-06-22 11:45:49 -0400107# Sort the packages in dependency order to get rid of scary non-errors
108# that are issued by ansible.
109#echo -e "${lBlue}Dependency sorting dependent software${NC}"
110#./sort_packages.sh
111#echo "deb_files:" >> ansible/group_vars/all
112#for i in `cat sortedDebs.txt`
113#do
114#echo " - $i" >> ansible/group_vars/all
115#done
Sergio Slobodrianee4b2bc2017-06-05 10:08:59 -0400116
Sergio Slobodriand24189e2017-06-10 23:27:15 -0400117# Make sure the ssh keys propagate to all hosts allowing passwordless logins between them
118echo -e "${lBlue}Propagating ssh keys${NC}"
Sergio Slobodrian37f4a0e2017-06-14 07:50:01 -0400119cp -r .keys ansible/roles/cluster-host/files
Sergio Slobodriand24189e2017-06-10 23:27:15 -0400120
Sergio Slobodrian9d9c8442017-07-25 07:55:42 -0400121# Install python on all the 3 servers since python is required for
122for i in $hosts
123do
Sergio Slobodriancd43feb2017-07-25 16:26:38 -0400124 echo -e "${lBlue}Installing ${lCyan}Python${lBlue}${NC}"
Sergio Slobodrian9d9c8442017-07-25 07:55:42 -0400125 scp -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -i .keys/$i -r python-deb voltha@$i:.
Sergio Slobodriancd43feb2017-07-25 16:26:38 -0400126 ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -i .keys/$i voltha@$i "sudo dpkg -i /home/voltha/python-deb/*minimal*"
Sergio Slobodrian9d9c8442017-07-25 07:55:42 -0400127 ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -i .keys/$i voltha@$i sudo dpkg -i -R /home/voltha/python-deb
128 ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -i .keys/$i voltha@$i rm -fr python-deb
129
130done
131
Sergio Slobodrian7c5e8852017-07-31 20:17:14 -0400132# Create the daemon.json file for the swarm
133echo "{" > daemon.json
134echo -n ' "insecure-registries" : [' >> daemon.json
135first=""
136for i in .keys/*
137do
138 if [ -z "$first" ]; then
139 echo -n '"'`basename $i`':5001"' >> daemon.json
140 first="not"
141 else
142 echo -n ' , "'`basename $i`':5001"' >> daemon.json
143 fi
144done
145echo "]" >> daemon.json
146echo "}" >> daemon.json
147unset first
Sergio Slobodrian9d9c8442017-07-25 07:55:42 -0400148
Sergio Slobodrianee4b2bc2017-06-05 10:08:59 -0400149# Running ansible
150echo -e "${lBlue}Running ansible${NC}"
151cp ansible/ansible.cfg .ansible.cfg
Sergio Slobodrian5727e982017-06-28 21:02:27 -0400152ansible-playbook ansible/voltha.yml -i ansible/hosts/cluster
Sergio Slobodrianee4b2bc2017-06-05 10:08:59 -0400153
Sergio Slobodrian37f4a0e2017-06-14 07:50:01 -0400154# Now all 3 servers need to be rebooted because of software installs.
155# Reboot them and wait patiently until they all come back.
156# Note this destroys the registry tunnel wich is no longer needed.
157hList=""
158for i in $hosts
159do
160 echo -e "${lBlue}Rebooting cluster hosts${NC}"
161 ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -i .keys/$i voltha@$i sudo telinit 6
162 hList="$i $hList"
163done
164
165# Give the hosts time to shut down so that pings stop working or the
166# script just falls through the next loop and the rest fails.
167echo -e "${lBlue}Waiting for shutdown${NC}"
168sleep 5
169
170
171while [ ! -z "$hList" ];
172do
173 # Attempt to ping the VMs on the list one by one.
174 echo -e "${lBlue}Waiting for hosts to reboot ${yellow}$hList${NC}"
175 for i in $hList
176 do
177 ping -q -c 1 $i > /dev/null 2>&1
178 ret=$?
179 if [ $ret -eq 0 ]; then
180 ipExpr=`echo $i | sed -e "s/\./[.]/g"`
181 hList=`echo $hList | sed -e "s/$ipExpr//" | sed -e "s/^ //" | sed -e "s/ $//"`
182 fi
183 done
184
185done
186
Sergio Slobodriand24189e2017-06-10 23:27:15 -0400187# Now initialize the the docker swarm cluster with managers.
188# The first server needs to be the primary swarm manager
189# the other nodes are backup mangers that join the swarm.
190# In the future, worker nodes will likely be added.
191
192echo "[swarm-master]" > ansible/hosts/swarm-master
193echo "[swarm-master-backup]" > ansible/hosts/swarm-master-backup
194
195ctr=1
196for i in $hosts
197do
198 if [ $ctr -eq 1 ]; then
199 echo $i >> ansible/hosts/swarm-master
200 echo "swarm_master_addr: \"$i\"" >> ansible/group_vars/all
201 ctr=0
202 else
203 echo $i >> ansible/hosts/swarm-master-backup
204 fi
205done
Sergio Slobodrian5727e982017-06-28 21:02:27 -0400206ansible-playbook ansible/swarm.yml -i ansible/hosts/swarm-master
207ansible-playbook ansible/swarm.yml -i ansible/hosts/swarm-master-backup
208ansible-playbook ansible/voltha.yml -i ansible/hosts/swarm-master
Sergio Slobodriand24189e2017-06-10 23:27:15 -0400209