blob: 7ff08cacd05be951ea0a0a2e2f8b434b30454a17 [file] [log] [blame]
Test User01ed0642019-07-03 20:17:06 +00001#!/bin/bash
David K. Bainbridgeb7285432019-07-02 22:05:24 -07002# Copyright 2019 Ciena Corporation
3#
4# Licensed under the Apache License, Version 2.0 (the "License");
5# you may not use this file except in compliance with the License.
6# You may obtain a copy of the License at
7#
8# http://www.apache.org/licenses/LICENSE-2.0
9#
10# Unless required by applicable law or agreed to in writing, software
11# distributed under the License is distributed on an "AS IS" BASIS,
12# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
13# See the License for the specific language governing permissions and
14# limitations under the License.
David Bainbridge712afb82019-08-14 19:55:58 +000015TOTAL_START_TIME=$(date +%s)
David K. Bainbridgeb7285432019-07-02 22:05:24 -070016
David Bainbridge38dc1e82019-08-12 15:18:45 +000017FANCY=${FANCY:-1}
18if [ "$TERM X" == " X" ]; then
19 FANCY=0
20fi
21
David K. Bainbridgeb7285432019-07-02 22:05:24 -070022# trap ctrl-c and call ctrl_c()
23trap ctrl_c INT
24
25function ctrl_c() {
David Bainbridge38dc1e82019-08-12 15:18:45 +000026 echo -en $CNORM
David K. Bainbridgeb7285432019-07-02 22:05:24 -070027 echo ""
28 echo "ctrl-c trapped"
David Bainbridgec6a6eb62019-10-18 22:50:07 +000029 echo "Thank you for trying 'voltha up'"
David K. Bainbridgeb7285432019-07-02 22:05:24 -070030 exit
31}
32
David K. Bainbridgeebf38d92020-02-10 10:46:31 -080033VOLTCTL_VERSION=${VOLTCTL_VERSION:-latest}
David K. Bainbridgefe1fa8a2019-11-12 12:03:21 -080034KIND_VERSION=${KIND_VERSION:-v0.5.1}
David K. Bainbridgeb3a99372020-01-08 14:39:06 -080035VK_RELEASE=${VK_RELEASE:-master}
Test User08ebbd92019-07-03 17:15:39 +000036
David Bainbridge38dc1e82019-08-12 15:18:45 +000037BLACK=
38RED=
39GREEN=
40YELLOW=
41BLUE=
42MAGENTA=
43CYAN=
44WHITE=
45BOLD=
46NORMAL=
47ERROR=
48CEOL=
49CNORM=
50CIVIS=
51if [ $FANCY -eq 1 ]; then
52 BLACK=$(tput setaf 0)
53 RED=$(tput setaf 1)
54 GREEN=$(tput setaf 2)
55 YELLOW=$(tput setaf 3)
56 BLUE=$(tput setaf 4)
57 MAGENTA=$(tput setaf 5)
58 CYAN=$(tput setaf 6)
59 WHITE=$(tput setaf 7)
60 BOLD=$(tput bold)
61 NORMAL=$(tput sgr0)
62 ERROR="\xe2\x9c\x97\x20"
63 CEOL=$(tput el)
64 CNORM=$(tput cnorm)
65 CIVIS=$(tput civis)
66fi
Test User7d866122019-07-09 17:52:35 +000067
Test User3d7ad8e2019-07-03 06:15:44 +000068TYPE=${TYPE:-minimal}
David Bainbridge0774b232019-08-02 06:37:19 +000069NAME=${NAME:-$TYPE}
David Bainbridgee87067b2019-08-12 22:00:12 +000070WITH_TIMINGS=${WITH_TIMINGS:-no}
Test User7d866122019-07-09 17:52:35 +000071WITH_BBSIM=${WITH_BBSIM:-no}
David Bainbridge5b7b96b2019-07-25 20:29:13 +000072WITH_RADIUS=${WITH_RADIUS:-no}
Matteo Scandolo78dfee02020-02-13 16:18:03 -080073WITH_EAPOL=${WITH_EAPOL:-yes}
74WITH_DHCP=${WITH_DHCP:-yes}
75WITH_IGMP=${WITH_IGMP:-no}
David Bainbridgeb270c202019-07-26 01:44:42 +000076WITH_ONOS=${WITH_ONOS:-yes}
David Bainbridge99ac7a22019-08-31 02:26:43 +000077WITH_CHAOS=${WITH_CHAOS:-no}
David Bainbridge46505fb2019-10-01 21:13:20 +000078WITH_ADAPTERS=${WITH_ADAPTERS:-yes}
79WITH_SIM_ADAPTERS=${WITH_SIM_ADAPTERS:-yes}
80WITH_OPEN_ADAPTERS=${WITH_OPEN_ADAPTERS:-yes}
David Bainbridge05cd8822019-11-19 17:43:53 +000081ONLY_ONE=${ONLY_ONE:-yes}
David Bainbridge2b19e832019-08-16 02:40:53 +000082CONFIG_SADIS=${CONFIG_SADIS:-no}
David Bainbridge27790d62019-08-13 22:43:19 +000083INSTALL_ONOS_APPS=${INSTALL_ONOS_APPS:-no}
Test Userba1e7e72019-07-10 22:27:54 +000084JUST_K8S=${JUST_K8S:-no}
85DEPLOY_K8S=${DEPLOY_K8S:-yes}
David K. Bainbridge0e89cb92019-07-17 11:30:10 -070086INSTALL_KUBECTL=${INSTALL_KUBECTL:-yes}
87INSTALL_HELM=${INSTALL_HELM:-yes}
David Bainbridge46505fb2019-10-01 21:13:20 +000088UPDATE_HELM_REPOS=${UPDATE_HELM_REPOS:-yes}
Matteo Scandolofab98622020-01-28 15:17:20 -080089WAIT_ON_DOWN=${WAIT_ON_DOWN:-yes}
David Bainbridge5b7b96b2019-07-25 20:29:13 +000090VOLTHA_LOG_LEVEL=${VOLTHA_LOG_LEVEL:-WARN}
David Bainbridge90fd8e32019-08-21 23:32:47 +000091VOLTHA_CHART=${VOLTHA_CHART:-onf/voltha}
92VOLTHA_CHART_VERSION=${VOLTHA_CHART_VERSION:-latest}
93VOLTHA_BBSIM_CHART=${VOLTHA_BBSIM_CHART:-onf/bbsim}
Matteo Scandolodcd29f52019-10-07 15:42:42 -070094VOLTHA_BBSIM_CHART_VERSION=${VOLTHA_BBSIM_CHART_VERSION:-latest}
David Bainbridgee10f6d52019-07-25 00:28:13 +000095VOLTHA_ADAPTER_SIM_CHART=${VOLTHA_ADAPTER_SIM_CHART:-onf/voltha-adapter-simulated}
David Bainbridge90fd8e32019-08-21 23:32:47 +000096VOLTHA_ADAPTER_SIM_CHART_VERSION=${VOLTHA_ADAPTER_SIM_CHART_VERSION:-latest}
David Bainbridgee10f6d52019-07-25 00:28:13 +000097VOLTHA_ADAPTER_OPEN_OLT_CHART=${VOLTHA_ADAPTER_OPEN_OLT_CHART:-onf/voltha-adapter-openolt}
David Bainbridge90fd8e32019-08-21 23:32:47 +000098VOLTHA_ADAPTER_OPEN_OLT_CHART_VERSION=${VOLTHA_ADAPTER_OPEN_OLT_CHART_VERSION:-latest}
David Bainbridgee10f6d52019-07-25 00:28:13 +000099VOLTHA_ADAPTER_OPEN_ONU_CHART=${VOLTHA_ADAPTER_OPEN_ONU_CHART:-onf/voltha-adapter-openonu}
David Bainbridge90fd8e32019-08-21 23:32:47 +0000100VOLTHA_ADAPTER_OPEN_ONU_CHART_VERSION=${VOLTHA_ADAPTER_OPEN_ONU_CHART_VERSION:-latest}
Andrea Campanella21323292019-12-18 11:44:19 -0800101ONOS_CHART_VERSION=${ONOS_CHART_VERSION:-latest}
David Bainbridge70c0ea82019-11-14 23:25:26 +0000102EXTRA_HELM_INSTALL_ARGS=
Test Userba1e7e72019-07-10 22:27:54 +0000103
104HAVE_GO=$(which go >/dev/null 2>&1 && echo "yes" || echo "no")
105HOSTOS=$(uname -s | tr "[:upper:]" "[:lower:"])
106HOSTARCH=$(uname -m | tr "[:upper:]" "[:lower:"])
107if [ $HOSTARCH == "x86_64" ]; then
108 HOSTARCH="amd64"
109fi
Test User7d866122019-07-09 17:52:35 +0000110
111# Verify TYPE setting
112if [ $(echo ":minimal:full:" | grep -ic ":$TYPE:") -eq 0 ]; then
David K. Bainbridge0e89cb92019-07-17 11:30:10 -0700113 >&2 echo -e "${RED}${BOLD}${ERROR}ERROR:${NORMAL}${RED} Invalid \$TYPE value of '$TYPE'. Should be 'minimal' or 'full'${NORMAL}"
Test User7d866122019-07-09 17:52:35 +0000114 exit 1
115fi
116
David Bainbridge2a0b8a42019-08-16 17:39:29 +0000117# Used to verify configuration values are set to "yes" or "no" value or convert
118# equivalents to "yes" or "no"
119function verify_yes_no() {
120 local VAR=$1
121 local VAL=$(eval echo \$$VAR)
122 if [ $(echo ":y:yes:true:n:no:false:1:0:" | grep -ic ":$VAL:") -eq 0 ]; then
123 >&2 echo -e "${RED}${BOLD}${ERROR}ERROR:${NORMAL}${RED} Invalid '$VAR' value of '$VAL'. Should be 'yes' or 'no'${NORMAL}"
124 echo "INVALID"
125 return 1
126 fi
127 if [ $(echo ":y:yes:true:1:" | grep -ic ":$VAL:") -eq 1 ]; then
128 echo "yes"
129 else
130 echo "no"
131 fi
132 return 0
133}
Test User7d866122019-07-09 17:52:35 +0000134
David Bainbridge2a0b8a42019-08-16 17:39:29 +0000135ALL_YES_NO="\
136 WITH_TIMINGS \
137 WITH_BBSIM \
138 WITH_RADIUS \
Matteo Scandolo78dfee02020-02-13 16:18:03 -0800139 WITH_EAPOL \
140 WITH_DHCP \
141 WITH_IGMP \
David Bainbridge2a0b8a42019-08-16 17:39:29 +0000142 WITH_ONOS \
David Bainbridge99ac7a22019-08-31 02:26:43 +0000143 WITH_CHAOS \
David Bainbridge46505fb2019-10-01 21:13:20 +0000144 WITH_ADAPTERS \
145 WITH_SIM_ADAPTERS \
146 WITH_OPEN_ADAPTERS \
David Bainbridge2a0b8a42019-08-16 17:39:29 +0000147 CONFIG_SADIS \
148 JUST_K8S \
149 DEPLOY_K8S \
150 INSTALL_ONOS_APPS \
David Bainbridge2a0b8a42019-08-16 17:39:29 +0000151 INSTALL_KUBECTL \
152 INSTALL_HELM \
David Bainbridge46505fb2019-10-01 21:13:20 +0000153 UPDATE_HELM_REPOS \
David Bainbridge4f1b5562019-08-19 04:46:52 +0000154 WAIT_ON_DOWN \
David Bainbridge70c0ea82019-11-14 23:25:26 +0000155 ONLY_ONE \
David Bainbridge2a0b8a42019-08-16 17:39:29 +0000156 "
David Bainbridge5b7b96b2019-07-25 20:29:13 +0000157
David Bainbridge2a0b8a42019-08-16 17:39:29 +0000158ALL_OPTIONS="\
159 NAME \
160 TYPE \
161 $ALL_YES_NO \
162 VOLTHA_LOG_LEVEL \
163 VOLTHA_CHART \
David Bainbridge90fd8e32019-08-21 23:32:47 +0000164 VOLTHA_CHART_VERSION \
165 VOLTHA_BBSIM_CHART \
166 VOLTHA_BBSIM_CHART_VERSION \
David Bainbridge2a0b8a42019-08-16 17:39:29 +0000167 VOLTHA_ADAPTER_SIM_CHART \
David Bainbridge90fd8e32019-08-21 23:32:47 +0000168 VOLTHA_ADAPTER_SIM_CHART_VERSION \
David Bainbridge2a0b8a42019-08-16 17:39:29 +0000169 VOLTHA_ADAPTER_OPEN_OLT_CHART \
David Bainbridge90fd8e32019-08-21 23:32:47 +0000170 VOLTHA_ADAPTER_OPEN_OLT_CHART_VERSION \
David Bainbridge2a0b8a42019-08-16 17:39:29 +0000171 VOLTHA_ADAPTER_OPEN_ONU_CHART \
David Bainbridge90fd8e32019-08-21 23:32:47 +0000172 VOLTHA_ADAPTER_OPEN_ONU_CHART_VERSION \
Andrea Campanella21323292019-12-18 11:44:19 -0800173 ONOS_CHART_VERSION \
David Bainbridge2a0b8a42019-08-16 17:39:29 +0000174 ONOS_API_PORT \
175 ONOS_SSH_PORT \
176 VOLTHA_API_PORT \
177 VOLTHA_SSH_PORT \
178 VOLTHA_ETCD_PORT \
David K. Bainbridge8f7f30b2020-01-08 13:06:16 -0800179 VK_RELEASE \
180 KIND_VERSION \
181 VOLTCTL_VERSION \
David Bainbridge2a0b8a42019-08-16 17:39:29 +0000182 "
David Bainbridge01294952019-07-30 19:33:45 +0000183
David Bainbridge2a0b8a42019-08-16 17:39:29 +0000184# Iterate over yes/no configuration options and validate
185for VAR in $ALL_YES_NO; do
186 eval $VAR=$(verify_yes_no $VAR)
187 if [ "$(eval echo \$$VAR)" == "INVALID" ]; then
188 exit 1;
189 fi
190done
David Bainbridgeb270c202019-07-26 01:44:42 +0000191
David Bainbridge0774b232019-08-02 06:37:19 +0000192mkdir -p .voltha
193touch .voltha/ports
194HAVE=$(grep $NAME .voltha/ports)
195if [ "$HAVE X" == " X" ]; then
196 # Find free port prefix
197 START=81
198 while true; do
199 if [ $(grep -c $START .voltha/ports) -eq 0 ]; then
200 break
201 fi
202 START=$(expr $START + 1)
203 done
204 DELTA=$(expr $START - 81)
David Bainbridgea2595422019-10-22 03:54:28 +0000205 ONOS_API_PORT=${ONOS_API_PORT:-${START}81}
206 ONOS_SSH_PORT=${ONOS_SSH_PORT:-${START}01}
207 VOLTHA_API_PORT=${VOLTHA_API_PORT:-5$(expr 55 + $DELTA)55}
208 VOLTHA_SSH_PORT=${VOLTHA_SSH_PORT:-$(expr 50 + $DELTA)22}
209 VOLTHA_ETCD_PORT=${VOLTHA_ETCD_PORT:-$(expr 23 + $DELTA)79}
Test User01ed0642019-07-03 20:17:06 +0000210else
David Bainbridge0774b232019-08-02 06:37:19 +0000211 VALUES=$(echo $HAVE | sed -e 's/\s//g' | cut -d= -f2)
David Bainbridgea2595422019-10-22 03:54:28 +0000212 ONOS_API_PORT=${ONOS_API_PORT:-$(echo $VALUES | cut -d, -f1)}
213 ONOS_SSH_PORT=${ONOS_SSH_PORT:-$(echo $VALUES | cut -d, -f2)}
214 VOLTHA_API_PORT=${VOLTHA_API_PORT:-$(echo $VALUES | cut -d, -f3)}
215 VOLTHA_SSH_PORT=${VOLTHA_SSH_PORT:-$(echo $VALUES | cut -d, -f4)}
216 VOLTHA_ETCD_PORT=${VOLTHA_ETCD_PORT:-$(echo $VALUES | cut -d, -f5)}
Test User01ed0642019-07-03 20:17:06 +0000217fi
218
David Bainbridge0774b232019-08-02 06:37:19 +0000219PORTTMP=$(mktemp -u)
220cat .voltha/ports | grep -v $NAME > $PORTTMP
221echo "$NAME=$ONOS_API_PORT,$ONOS_SSH_PORT,$VOLTHA_API_PORT,$VOLTHA_SSH_PORT,$VOLTHA_ETCD_PORT" >> $PORTTMP
222cp $PORTTMP .voltha/ports
223rm -f $PORTTMP
224
David Bainbridge27790d62019-08-13 22:43:19 +0000225export ONOS_API_PORT ONOS_SSH_PORT
David Bainbridge01294952019-07-30 19:33:45 +0000226
Test Userd87942b2019-07-03 07:20:24 +0000227IDX=1
David Bainbridgee87067b2019-08-12 22:00:12 +0000228CLOCK="TIME:"
David Bainbridge38dc1e82019-08-12 15:18:45 +0000229SPIN_PARTS=
230NOT_VERIFIED=
David Bainbridgef858a022019-08-14 21:25:11 +0000231THEX=
232BUILD=
233CROSS=
234ENTER=
David Bainbridge38dc1e82019-08-12 15:18:45 +0000235VERIFIED=
236HELM=
237OLD_KEY=
238BIRD=
239HIGH_VOLTAGE=
240PLUG=
241RESTART=
242FORWARD=
243INSTALL=
244STOP=
245GO=
246DOWNLOAD=
247GEAR=
248NO_ENTRY=
249LOCK=
250
251if [ $FANCY -eq 1 ]; then
252 SPIN_PARTS="\
253 \xe2\xa2\x8e\xe2\xa1\xb0 \
254 \xe2\xa2\x8e\xe2\xa1\xa1 \
255 \xe2\xa2\x8e\xe2\xa1\x91 \
256 \xe2\xa2\x8e\xe2\xa0\xb1 \
257 \xe2\xa0\x8e\xe2\xa1\xb1 \
258 \xe2\xa2\x8a\xe2\xa1\xb1 \
259 \xe2\xa2\x8c\xe2\xa1\xb1 \
260 \xe2\xa2\x86\xe2\xa1\xb1 \
261 "
David Bainbridgee87067b2019-08-12 22:00:12 +0000262 CLOCK="\xe2\x8f\xb1"
David Bainbridgef858a022019-08-14 21:25:11 +0000263 THEX="${RED}${BOLD}\xe2\x9c\x97\x20${NORMAL}"
264 ENTER="${YELLOW}${BOLD}\xe2\x8e\x86${NORMAL}"
265 CROSS="${YELLOW}${BOLD}\xe2\x9c\x9a${NORMAL}"
266 BUILD="${YELLOW}${BOLD}\xf0\x9f\x8f\x97${NORMAL}"
267 NOT_VERIFIED="$BUILD"
268 VERIFIED="${GREEN}${BOLD}\xe2\x9c\x93\x20${NORMAL}"
269 HELM="${BLUE}${BOLD}\xE2\x8E\x88${NORMAL}"
David Bainbridge38dc1e82019-08-12 15:18:45 +0000270 OLD_KEY="\xF0\x9F\x97\x9D"
271 BIRD="\xF0\x9F\x90\xA6"
272 HIGH_VOLTAGE="\xE2\x9A\xA1"
273 PLUG="\xF0\x9F\xa7\xa9"
274 RESTART="\xf0\x9f\x94\x84"
275 FORWARD="\xE2\x87\xA8"
276 INSTALL="\xF0\x9F\x8F\x97"
277 STOP="\xf0\x9f\x9b\x91"
278 GO="\xf0\x9f\x9a\x80"
279 DOWNLOAD="\xf0\x9f\x93\xa5"
280 GEAR="\xe2\x9a\x99"
281 NO_ENTRY="\xe2\x9b\x94"
282 LOCK="\xf0\x9f\x94\x92"
283fi
David K. Bainbridge0e89cb92019-07-17 11:30:10 -0700284
David Bainbridge712afb82019-08-14 19:55:58 +0000285duration() {
David Bainbridgee87067b2019-08-12 22:00:12 +0000286 local h=$(expr $1 / 3600)
287 local m=$(expr $1 % 3600 / 60)
288 local s=$(expr $1 % 60)
289 local t=""
290
291 if [ $h -gt 0 ]; then
292 t="$t${h}h"
293 fi
294 if [ $m -gt 0 ]; then
295 t="$t${m}m"
296 fi
David Bainbridge712afb82019-08-14 19:55:58 +0000297 echo "$t${s}s"
298}
299
300printtime() {
301 local INDENT=
302 if [ "$1" == "-" ]; then
303 INDENT=" "
304 shift
305 fi
306 echo -e "$INDENT $CLOCK $(duration $1)"
David Bainbridgee87067b2019-08-12 22:00:12 +0000307}
308
David K. Bainbridgeb7285432019-07-02 22:05:24 -0700309bspin() {
Test Userd87942b2019-07-03 07:20:24 +0000310 IDX=1
David K. Bainbridgeb7285432019-07-02 22:05:24 -0700311 local INDENT=
312 if [ "$1" == "-" ]; then
313 INDENT=" "
314 shift
315 fi
David Bainbridge38dc1e82019-08-12 15:18:45 +0000316 if [ $FANCY -eq 0 ]; then
317 LINE=$(echo $* | sed -e 's/[\s+-]//g')
318 if [ "$LINE X" == " X" ]; then
319 return
320 fi
321 echo -e "$CIVIS$INDENT$*"
322 else
323 echo -en "$CIVIS$INDENT $*"
324 fi
David K. Bainbridgeb7285432019-07-02 22:05:24 -0700325}
326
327sspin() {
328 local INDENT=
329 if [ "$1" == "-" ]; then
330 INDENT=" "
331 shift
332 fi
David Bainbridge38dc1e82019-08-12 15:18:45 +0000333 if [ $FANCY -eq 0 ]; then
334 LINE=$(echo $* | sed -e 's/[\s+-]//g')
335 if [ "$LINE X" == " X" ]; then
336 return
337 fi
338 echo -e "$INDENT$*"
339 else
340 C=$(echo $SPIN_PARTS | cut '-d ' -f $IDX)
341 echo -en "\r$INDENT$C $*"
342 IDX=$(expr $IDX + 1)
343 if [ $IDX -gt 8 ]; then
344 IDX=1
345 fi
David K. Bainbridgeb7285432019-07-02 22:05:24 -0700346 fi
347}
348
349espin() {
350 local INDENT=
351 if [ "$1" == "-" ]; then
352 INDENT=" "
353 shift
354 fi
David Bainbridge38dc1e82019-08-12 15:18:45 +0000355 if [ $FANCY -eq 0 ]; then
356 LINE=$(echo $* | sed -e 's/[\s+-]//g')
357 if [ "$LINE X" == " X" ]; then
358 return
359 fi
360 echo -e "$INDENT$*"
361 else
362 echo -e "\r$INDENT$*$CNORM"
363 fi
David K. Bainbridgeb7285432019-07-02 22:05:24 -0700364}
365
David Bainbridgeac7f8072019-08-01 22:15:33 +0000366if [ "$1" == "get" -a "$2" == "voltconfig" ]; then
David Bainbridge0774b232019-08-02 06:37:19 +0000367 echo "$HOME/.volt/config-$NAME"
David Bainbridgeac7f8072019-08-01 22:15:33 +0000368 exit
369fi
370
Matteo Scandolo7ef6ba52019-10-04 09:20:37 -0700371if [ $# -ne 1 -o $(echo ":up:down:dump:" | grep -c ":$1:") -ne 1 ]; then
David Bainbridgeac7f8072019-08-01 22:15:33 +0000372 >&2 echo "What wouild you like to do today:"
373 >&2 echo " up - bring up voltha"
374 >&2 echo " down - tear down voltha"
375 >&2 echo " dump - create a debug dump of running system"
376 exit 1
377fi
378
David Bainbridge4f1b5562019-08-19 04:46:52 +0000379push_onos_config() {
Matteo Scandolo78dfee02020-02-13 16:18:03 -0800380 local TYPE=$1
381 local MSG=$2
382 local RESOURCE=$3
383 local DATA=$4
David Bainbridge4f1b5562019-08-19 04:46:52 +0000384
David K. Bainbridgeb4b163b2020-02-19 15:55:06 -0800385 # Thanks to the latest version of ONOS using the return code 207 this gets a
386 # whole lot nastier. Can't thank them enough for doing this. So in order to
387 # capture the command and the output in the log file as well as capture the
388 # status code to verify it is 200 and not 207 mutltiple files and a bit of
389 # hackery must be used. Thanks again ONOS.
390 local CMD_ECHO=$(mktemp -u)
391 local CMD_OUTPUT=$(mktemp -u)
392 local SC_OUTPUT=$(mktemp -u)
393
David Bainbridge4f1b5562019-08-19 04:46:52 +0000394 bspin - "$MSG $GEAR"
395 while true; do
Matteo Scandolo78dfee02020-02-13 16:18:03 -0800396 if [ $TYPE == "file" ]; then
David K. Bainbridgeb4b163b2020-02-19 15:55:06 -0800397 (set -x; curl --fail -sSL --user karaf:karaf -w "%{http_code}" -o $CMD_OUTPUT -X POST -H Content-Type:application/json http://127.0.0.1:$ONOS_API_PORT/onos/v1/$RESOURCE --data @$DATA >$SC_OUTPUT 2>/dev/null) >>$CMD_ECHO 2>&1
Matteo Scandolo78dfee02020-02-13 16:18:03 -0800398 fi
399 if [ $TYPE == "json" ]; then
David K. Bainbridgeb4b163b2020-02-19 15:55:06 -0800400 (set -x; curl --fail -sSL --user karaf:karaf -w "%{http_code}" -o $CMD_OUTPUT -X POST -H Content-Type:application/json http://127.0.0.1:$ONOS_API_PORT/onos/v1/$RESOURCE --data $DATA >$SC_OUTPUT 2>/dev/null) >>$CMD_ECHO 2>&1
Matteo Scandolo78dfee02020-02-13 16:18:03 -0800401 fi
David K. Bainbridgeb4b163b2020-02-19 15:55:06 -0800402 RESULT=$?
403 # Dump everything to the log
404 cat $CMD_ECHO >> $LOG
405 cat $CMD_OUTPUT >> $LOG
406 SC=$(cat $SC_OUTPUT)
407
408 # clean up temp files
409 rm -f $CMD_ECHO $CMD_OUTPUT $SC_OUTPUT
410 if [ $RESULT -eq 0 -a "$SC" == "200" ]; then
David Bainbridge4f1b5562019-08-19 04:46:52 +0000411 break
412 fi
Matteo Scandolo9a77a732020-01-09 14:24:12 -0800413 sleep 1
David Bainbridge4f1b5562019-08-19 04:46:52 +0000414 sspin -
415 done
416 espin - $VERIFIED
417}
418
Matteo Scandolo9a77a732020-01-09 14:24:12 -0800419check_onos_app_active() {
420 local APP_ID=$1
421
422 bspin - "Checking that $APP_ID is active $CLOCK"
423 while true; do
424 (set -x; curl --fail -sSL --user karaf:karaf -X GET http://127.0.0.1:$ONOS_API_PORT/onos/v1/applications/$APP_ID | grep ACTIVE >>$LOG 2>&1) >>$LOG 2>&1
425 if [ $? -eq 0 ]; then
426 break
427 fi
428 sleep 1
429 sspin -
430 done
431 sleep 5 # OSGI components take a little longer that the app to activate
432 espin - $VERIFIED
433}
434
David Bainbridge4f1b5562019-08-19 04:46:52 +0000435override_onos_app() {
436 local APP=$1
437 local NAME=$(basename $APP | sed -e 's/^[0-9][0-9]*-//g' -e 's/-.*$//g')
438 while true; do
439 sspin -
440 # Attempt to delete old version (if it exists)
441 (set -x; curl --fail -sSL --user karaf:karaf -X DELETE http://127.0.0.1:$ONOS_API_PORT/onos/v1/applications/$NAME >>$LOG 2>&1) >>$LOG 2>&1
442 sspin -
443 if [ $? -ne 0 ]; then
444 continue
445 fi
446 (set -x; curl --fail -sSL --user karaf:karaf -X POST -H Content-Type:application/octet-stream http://127.0.0.1:$ONOS_API_PORT/onos/v1/applications?activate=true --data-binary @$APP >>$LOG 2>&1) >>$LOG 2>&1
447 if [ $? -eq 0 ]; then
448 break
449 fi
450 sleep .2
451 done
452}
453
454activate_onos_app() {
455 local MSG="$1"
456 local APP=$2
457
458 bspin - "$MSG $GO"
459 while true; do
460 sspin -
461 (set -x; curl --fail -sSL --user karaf:karaf -X POST http://127.0.0.1:$ONOS_API_PORT/onos/v1/applications/$APP/active >>$LOG 2>&1) >>$LOG 2>&1
462 if [ $? -eq 0 ]; then
463 break
464 fi
465 sleep .2
466 done
467 espin - "$VERIFIED"
468}
469
470count_pods() {
471 local NAMESPACE=$1; shift
472 if [ "$NAMESPACE" == "all-namespaces" ]; then
473 NAMESPACE="--all-namespaces"
474 else
475 NAMESPACE="-n $NAMESPACE"
476 fi
477 echo "$NAMESPACE" > /tmp/t
478 local STATES=$1; shift
479 echo "$STATES" >> /tmp/t
480 local PODS=$(kubectl get $NAMESPACE pod -o go-template="{{range .items}}{{.metadata.name}}/{{.status.phase}}/_{{range .status.containerStatuses}}{{.ready}}_{{end}} {{end}}")
481 local COUNT=0
482 local PATTERNS="$*"
483 for POD in $PODS; do
484 local NAME=$(echo $POD | cut -d/ -f 1)
485 local STATE=$(echo $POD | cut -d/ -f 2)
486 local CONTAINERS=$(echo $POD | cut -d/ -f 3 | sed -e 's/_/ /g')
487 if [ "$STATES" == "*" -o $(echo "$STATES" | grep -c ":$STATE:") -ne 0 ]; then
488 echo "IN WITH $POD" >> /tmp/t
489 local TOTAL=$(echo $CONTAINERS | wc -w)
490 local FOUND=$(echo $CONTAINERS | grep -o true | wc -l)
491 if [ $TOTAL -eq $FOUND ]; then
492 for PATTERN in $PATTERNS; do
493 echo "TEST $PATTERN AGAINST $NAME" >> /tmp/t
494 if [[ $NAME =~ $PATTERN ]]; then
495 echo "COUNT $NAME" >> /tmp/t
496 COUNT=$(expr $COUNT + 1)
497 break
498 fi
499 done
500 fi
501 fi
502 done
503 echo $COUNT >> /tmp/t
504 echo $COUNT
505}
506
507wait_for_pods() {
508 local INDENT=
509 if [ "$1" == "-" ]; then
510 INDENT=$1; shift
511 fi
512 local NAMESPACE=$1; shift
513 local EXPECT=$1; shift
514 local TYPE=$1; shift
515 local RETRY=$1; shift
516 local MESSAGE=$1; shift
517 local PATTERNS=$*
David Bainbridge99ac7a22019-08-31 02:26:43 +0000518 local STATES=":Running:"
519 if [ "$TYPE" == "not" ]; then
520 STATES="*"
521 fi
522 local HAVE=$(count_pods $NAMESPACE "$STATES" $PATTERNS)
David Bainbridge4f1b5562019-08-19 04:46:52 +0000523 local ALL=$HAVE
524 if [ "$TYPE" == "only" ]; then
525 ALL=$(count_pods "all-namespaces" "*" ".*")
526 fi
527 COUNT=$(expr 300 / 15)
528 bspin $INDENT $MESSAGE
529 sspin $INDENT
530 if [ $HAVE -ne $EXPECT -o $ALL -ne $HAVE ]; then
531 while [ $HAVE -ne $EXPECT -o $ALL -ne $HAVE ]; do
532 sspin $INDENT
533 COUNT=$(expr $COUNT - 1)
534 if [ $COUNT -eq 0 ]; then
David Bainbridge99ac7a22019-08-31 02:26:43 +0000535 HAVE=$(count_pods $NAMESPACE "$STATES" $PATTERNS)
David Bainbridge4f1b5562019-08-19 04:46:52 +0000536 ALL=$HAVE
537 if [ "$TYPE" == "only" ]; then
538 ALL=$(count_pods "all-namespaces" "*" ".*")
539 fi
540 COUNT=$(expr 300 / 15)
541 fi
542 sleep .15
543 done
544 fi
545 espin $INDENT $VERIFIED
546 if [ $HAVE -ne $EXPECT ]; then
547 return 1
548 fi
549 return 0
550}
551
David K. Bainbridgefe1fa8a2019-11-12 12:03:21 -0800552port_forward() {
553 local NS=$1
554 local SVC=$2
555 local FROM_PORT=$3
556 local TO_PORT=$4
557 local TAG=$SVC-$NAME
558
559 (set -x; _TAG=$TAG bash -c "while true; do kubectl port-forward -n $NS service/$SVC $FROM_PORT:$TO_PORT; done" >>$LOG 2>&1 &) >>$LOG 2>&1
560}
561
562kill_port_forward() {
563 local TAG=$1-$NAME
David Bainbridgec6871d22019-11-13 17:10:31 +0000564 local P_IDS=$(ps e -ww -A | grep "_TAG=$TAG" | grep -v grep | awk '{print $1}')
David Bainbridgebcf235b2019-11-12 21:33:58 +0000565 local PARENTS=
David K. Bainbridgefe1fa8a2019-11-12 12:03:21 -0800566 local KIDS=
David Bainbridgec6871d22019-11-13 17:10:31 +0000567 local UNKNOWN=
568 if [ ! -z "$P_IDS" ]; then
569 for P_ID in $P_IDS; do
570 local PP_ID=$(ps -o ppid $P_ID | tail -n +2)
571 if [ ! -z "$PP_ID" ]; then
572 if [ $PP_ID -eq 1 ]; then
573 PARENTS="$PARENTS $P_ID"
574 else
575 KIDS="$KIDS $P_ID"
576 fi
David K. Bainbridgefe1fa8a2019-11-12 12:03:21 -0800577 else
David Bainbridgec6871d22019-11-13 17:10:31 +0000578 UNKNOWN="$UNKNOWN $P_ID"
David K. Bainbridgefe1fa8a2019-11-12 12:03:21 -0800579 fi
580 done
David Bainbridgec6871d22019-11-13 17:10:31 +0000581 (set -x; kill -9 $PARENTS $KIDS $UNKNOWN >>$LOG 2>&1) >>$LOG 2>&1
David K. Bainbridgefe1fa8a2019-11-12 12:03:21 -0800582 fi
583}
584
David Bainbridgeac7f8072019-08-01 22:15:33 +0000585if [ "$1" == "down" ]; then
David Bainbridge0774b232019-08-02 06:37:19 +0000586 echo "Tearing down voltha cluster $NAME"
587 LOG="down-$NAME.log"
588 echo $(date -u +"%Y%m%dT%H%M%SZ") >$LOG
David K. Bainbridgefe1fa8a2019-11-12 12:03:21 -0800589 bspin "Remove port-forwards: onos-ui-$NAME"
590 kill_port_forward onos-ui
591 sspin "Remove port-forwards: onos-ssh-$NAME$CEOL"
592 kill_port_forward onos-ssh
593 sspin "Remove port-forwards: voltha-api-$NAME$CEOL"
594 kill_port_forward voltha-api
David K. Bainbridgefe1fa8a2019-11-12 12:03:21 -0800595 sspin "Remove port-forwards: voltha-etcd-$NAME$CEOL"
596 kill_port_forward voltha-etcd-cluster-client
597 espin "$VERIFIED Remove port-forwards$CEOL"
David Bainbridgeac7f8072019-08-01 22:15:33 +0000598 if [ $DEPLOY_K8S == "yes" ]; then
599 if [ -x ./bin/kind ]; then
David Bainbridge0774b232019-08-02 06:37:19 +0000600 bspin "Delete Kubernetes Kind Cluster"
601 (set -x; ./bin/kind delete cluster --name voltha-$NAME >>$LOG 2>&1) >>$LOG 2>&1
602 espin $VERIFIED
David Bainbridgeac7f8072019-08-01 22:15:33 +0000603 else
David Bainbridge0774b232019-08-02 06:37:19 +0000604 espin "$NO_ENTRY Delete Kubernetes Kind Cluster: kind command not found"
David Bainbridgeac7f8072019-08-01 22:15:33 +0000605 fi
606 else
607 EXISTS=$(helm list -q)
608 EXPECT="etcd-operator onos open-olt open-onu sim voltha bbsim radius"
David Bainbridge0774b232019-08-02 06:37:19 +0000609 bspin "Remove Helm Deployments"
David Bainbridgeac7f8072019-08-01 22:15:33 +0000610 for i in $EXISTS; do
611 if [ $(echo $EXPECT | grep -c $i) -eq 1 ]; then
David Bainbridge0774b232019-08-02 06:37:19 +0000612 sspin "Remove Helm Deployments: $i$CEOL"
David K. Bainbridgefe1fa8a2019-11-12 12:03:21 -0800613 (set -x; ./bin/helm delete --no-hooks --purge $i >>$LOG 2>&1) >>$LOG 2>&1
David Bainbridgeac7f8072019-08-01 22:15:33 +0000614 fi
615 done
David Bainbridge0774b232019-08-02 06:37:19 +0000616 espin "$VERIFIED Remove Helm Deployments$CEOL"
David Bainbridge4f1b5562019-08-19 04:46:52 +0000617 if [ "$WAIT_ON_DOWN" == "yes" ]; then
618 # There should only be 13 or 15 PODs in the kube-system name
619 # space and no other PODs
David Bainbridge4f1b5562019-08-19 04:46:52 +0000620 PODS="coredns-.* \
621 etcd-voltha-$NAME-control-plane \
622 kindnet-.* \
623 kube-apiserver-voltha-$NAME-control-plane \
624 kube-controller-manager-voltha-$NAME-control-plane \
625 kube-proxy-.* \
626 kube-scheduler-voltha-$NAME-control-plane \
627 tiller-deploy-.*"
628 EXPECT=$(test "$TYPE" == "minimal" && echo "13" || echo "15")
David Bainbridge99ac7a22019-08-31 02:26:43 +0000629 PODS="adapter-.* \
630 bbsim.* \
631 etcd-operator.* \
632 radius.* \
633 voltha-.*"
Matteo Scandolo73442f92020-01-29 09:53:22 -0800634
David Bainbridge99ac7a22019-08-31 02:26:43 +0000635 EXPECT=0
636
Matteo Scandolo73442f92020-01-29 09:53:22 -0800637 if [ "$WITH_ONOS" == "yes" ]; then
638 ONOS_PODS="onos-.*"
639 wait_for_pods "default" $EXPECT "not" -1 "Waiting for ONOS PODs to terminate" $ONOS_PODS
640 fi
David Bainbridge99ac7a22019-08-31 02:26:43 +0000641 wait_for_pods "voltha" $EXPECT "not" -1 "Waiting for VOLTHA PODs to terminate" $PODS
David Bainbridge4f1b5562019-08-19 04:46:52 +0000642 fi
David Bainbridgeac7f8072019-08-01 22:15:33 +0000643 fi
Matteo Scandolo7ef6ba52019-10-04 09:20:37 -0700644 exit
David Bainbridgeac7f8072019-08-01 22:15:33 +0000645fi
646
647if [ "$1" == "dump" ]; then
David Bainbridge0774b232019-08-02 06:37:19 +0000648 LOG="dump-$NAME.log"
David Bainbridgeac7f8072019-08-01 22:15:33 +0000649 TS=$(date -u +"%Y%m%dT%H%M%SZ")
David Bainbridge76514a02019-10-08 01:50:35 +0000650 if [ ! -z "$DUMP_FROM" ]; then
651 TS=$(echo $DUMP_FROM | sed -e 's/[:-]//g')
652 fi
David Bainbridgeac7f8072019-08-01 22:15:33 +0000653 WORK=$(mktemp -u -d)
David Bainbridge0774b232019-08-02 06:37:19 +0000654 DATA=$WORK/voltha-debug-dump-$NAME-$TS
David Bainbridgeac7f8072019-08-01 22:15:33 +0000655 mkdir -p $DATA
656 echo $TS > $LOG
David Bainbridge0774b232019-08-02 06:37:19 +0000657 echo -e "Capturing debug dump to voltha-debug-dump-$NAME-$TS.tgz"
David Bainbridgeac7f8072019-08-01 22:15:33 +0000658 bspin - "Copy install log"
David Bainbridge0774b232019-08-02 06:37:19 +0000659 if [ -f install-$NAME.log ]; then
660 (set -x; cp install-$NAME.log $DATA/install-$NAME.log) >>$LOG 2>&1
David Bainbridgeac7f8072019-08-01 22:15:33 +0000661 espin - $VERIFIED
662 else
David Bainbridge0774b232019-08-02 06:37:19 +0000663 espin - "$NO_ENTRY Copy install log: install-$NAME.log not found"
David Bainbridgeac7f8072019-08-01 22:15:33 +0000664 fi
665 bspin - "Dumping Kubernetes PODs"
666 (set -x; kubectl get --all-namespaces pods >> $DATA/all-pods.txt 2>&1) >>$LOG 2>&1
667 espin - $VERIFIED
668 bspin - "Dumping Kubernetes SERVICEs"
669 (set -x; kubectl get --all-namespaces svc >> $DATA/all-services.txt 2>&1) >>$LOG 2>&1
670 espin - $VERIFIED
671 bspin - "Dumping Kubernetes EVENTs"
672 (set -x; kubectl get --all-namespaces events >> $DATA/all-events.txt 2>&1) >>$LOG 2>&1
673 espin - $VERIFIED
674 bspin - "Dumping VOLTHA POD details"
Matteo Scandolodcd29f52019-10-07 15:42:42 -0700675 PODS="$(kubectl -n default get pod -o name | grep onos | sed -e 's/^/default:/g') $(kubectl get -n voltha pod -o name | sed -e 's/^/voltha:/g')"
David Bainbridgecfd7ca12019-10-06 03:31:41 +0000676 SINCE=
677 if [ ! -z "$DUMP_FROM" ]; then
678 SINCE="--since-time=$DUMP_FROM"
679 fi
David Bainbridgeac7f8072019-08-01 22:15:33 +0000680 for POD in $PODS; do
David Bainbridge1f0655a2019-10-01 22:08:48 +0000681 NS=$(echo $POD | cut -d: -f1)
682 POD=$(echo $POD | cut -d: -f2)
David Bainbridgeac7f8072019-08-01 22:15:33 +0000683 sspin - "Dumping VOLTHA POD details: $POD$CEOL"
684 mkdir -p $DATA/$POD
David Bainbridge1f0655a2019-10-01 22:08:48 +0000685 (set -x; kubectl describe -n $NS $POD >> $DATA/$POD/describe.txt 2>&1) >>$LOG 2>&1
David Bainbridgeac7f8072019-08-01 22:15:33 +0000686 sspin - "Dumping VOLTHA POD details: $POD"
David Bainbridgecfd7ca12019-10-06 03:31:41 +0000687 (set -x; kubectl logs -n $NS --all-containers $SINCE --previous $LOG_ARGS $POD >> $DATA/$POD/logs-previous.txt 2>&1) >>$LOG 2>&1
David Bainbridgeac7f8072019-08-01 22:15:33 +0000688 sspin - "Dumping VOLTHA POD details: $POD"
David Bainbridgecfd7ca12019-10-06 03:31:41 +0000689 (set -x; kubectl logs -n $NS --all-containers $SINCE $LOG_ARGS $POD >> $DATA/$POD/logs-current.txt 2>&1) >>$LOG 2>&1
David Bainbridgeac7f8072019-08-01 22:15:33 +0000690 sspin - "Dumping VOLTHA POD details: $POD"
691 done
692 espin - "$VERIFIED Dumping VOLTHA POD details$CEOL"
693 bspin - "Dumping ETCD"
694 if [ "$(which etcdctl) X" != " X" ]; then
David Bainbridge0774b232019-08-02 06:37:19 +0000695 (set -x; ETCDCTL_API=3 etcdctl --endpoints localhost:$VOLTHA_ETCD_PORT get --prefix service/voltha | hexdump -C >> $DATA/etcd.hex 2>&1) >>$LOG 2>&1
David Bainbridgeac7f8072019-08-01 22:15:33 +0000696 espin - $VERIFIED
697 else
698 espin - "$NO_ENTRY Dumping ETCD: etcdctl command not available"
699 fi
David Bainbridge0774b232019-08-02 06:37:19 +0000700 bspin - "Creating compressed TAR: voltha-debug-dump-$NAME-$TS.tgz"
701 (set -x; tar -C $WORK -zcf voltha-debug-dump-$NAME-$TS.tgz ./voltha-debug-dump-$NAME-$TS) >>$LOG 2>&1
David Bainbridgeac7f8072019-08-01 22:15:33 +0000702 espin - $VERIFIED
703 bspin - "Cleanup"
704 (set -x; rm -rf $WORK) >>$LOG 2>&1
705 espin - $VERIFIED
David Bainbridge0774b232019-08-02 06:37:19 +0000706 bspin - "$(ls -l voltha-debug-dump-$NAME-$TS.tgz)"
David Bainbridgeac7f8072019-08-01 22:15:33 +0000707 espin - $VERIFIED
708 exit
709fi
710
David Bainbridge0774b232019-08-02 06:37:19 +0000711LOG="install-$NAME.log"
David Bainbridgeac7f8072019-08-01 22:15:33 +0000712date > $LOG
David Bainbridge0774b232019-08-02 06:37:19 +0000713echo "PORTS=$ONOS_API_PORT,$ONOS_SSH_PORT,$VOLTHA_API_PORT,$VOLTHA_SSH_PORT,$VOLTHA_ETCD_PORT" >> $LOG
David Bainbridgeac7f8072019-08-01 22:15:33 +0000714
715# Output install options to log
716echo "OPTIONS" >> $LOG
David Bainbridgeac7f8072019-08-01 22:15:33 +0000717for O in $ALL_OPTIONS; do
718 VAL=$(eval echo \$$O)
David Bainbridgeac7f8072019-08-01 22:15:33 +0000719 if [ ! -z "$VAL" ]; then
720 printf " %-30s = %s\n" $O $VAL >> $LOG
721 fi
722done
723
Matteo Scandolo7ef6ba52019-10-04 09:20:37 -0700724helm_install() {
David K. Bainbridgeb7285432019-07-02 22:05:24 -0700725 local INDENT=
726 if [ "$1" == "-" ]; then
727 INDENT=$1; shift
728 fi
729 local NAMESPACE=$1; shift
David Bainbridge0774b232019-08-02 06:37:19 +0000730 local INAME=$1; shift
David K. Bainbridgeb7285432019-07-02 22:05:24 -0700731 local CHART=$1; shift
David Bainbridge90fd8e32019-08-21 23:32:47 +0000732 local CHART_VERSION=$1; shift
David K. Bainbridgeb7285432019-07-02 22:05:24 -0700733 local MESSAGE=$*
734
David Bainbridge90fd8e32019-08-21 23:32:47 +0000735 if [ "$CHART_VERSION X" != " X" -a "$CHART_VERSION" != "latest" ]; then
736 CHART_VERSION="--version $CHART_VERSION"
737 else
738 CHART_VERSION=
739 fi
740
David Bainbridge99ac7a22019-08-31 02:26:43 +0000741 local CHART_ARGS=
742 if [ -r "${INAME}-values.yaml" ]; then
743 CHART_ARGS="-f ${INAME}-values.yaml"
744 fi
745
David K. Bainbridgeb7285432019-07-02 22:05:24 -0700746 COUNT=$(expr 300 / 15)
747 bspin $INDENT $MESSAGE
David Bainbridge70c0ea82019-11-14 23:25:26 +0000748 (set -x; helm install -f $NAME-values.yaml $CHART_ARGS $EXTRA_HELM_INSTALL_ARGS --set defaults.log_level=$VOLTHA_LOG_LEVEL --namespace $NAMESPACE --name $INAME $CHART_VERSION $EXTRA_HELM_FLAGS $CHART >>$LOG 2>&1) >>$LOG 2>&1
David K. Bainbridgeb7285432019-07-02 22:05:24 -0700749 SUCCESS=$?
750 while [ $SUCCESS -ne 0 ]; do
751 sspin $INDENT
752 COUNT=$(expr $COUNT - 1)
753 if [ $COUNT -eq 0 ]; then
Andy Baviere22ff252019-12-19 11:40:31 -0700754 (set -x; helm delete --purge $INAME >>$LOG 2>&1) >>$LOG 2>&1
David Bainbridge99ac7a22019-08-31 02:26:43 +0000755 (set -x; helm install -f $NAME-values.yaml $CHART_ARGS --set defaults.log_level=$VOLTHA_LOG_LEVEL --namespace $NAMESPACE --name $INAME $CHART_VERSION $EXTRA_HELM_FLAGS $CHART >>$LOG 2>&1) >>$LOG 2>&1
Andy Baviere22ff252019-12-19 11:40:31 -0700756 SUCCESS=$?
David K. Bainbridgeb7285432019-07-02 22:05:24 -0700757 COUNT=$(expr 300 / 15)
758 fi
759 sleep .15
760 done
761 espin $INDENT $VERIFIED
762}
763
David K. Bainbridgeb7285432019-07-02 22:05:24 -0700764echo "INSTALL TYPE: $TYPE" >> $LOG
765
766bspin "Verify GOPATH"
767export GOPATH=$(pwd)
Test User3d7ad8e2019-07-03 06:15:44 +0000768mkdir -p $GOPATH/bin
David K. Bainbridgeb7285432019-07-02 22:05:24 -0700769espin $VERIFIED
770
David Bainbridgee87067b2019-08-12 22:00:12 +0000771STIME=$(date +%s)
David K. Bainbridge0e89cb92019-07-17 11:30:10 -0700772if [ "$INSTALL_KUBECTL" == "no" ]; then
773 bspin "Skip kubectl install"
774 espin $NO_ENTRY
Test Userc13bdc92019-07-03 20:57:49 +0000775else
David K. Bainbridge0e89cb92019-07-17 11:30:10 -0700776 bspin "Verify kubectl $HELM"
777 if [ -x $GOPATH/bin/kubectl ]; then
778 espin $VERIFIED
779 else
780 espin $NOT_VERIFIED
781 bspin - "Download and install Kubernetes/kubectl $DOWNLOAD"
782 (set -x; curl -o $GOPATH/bin/kubectl -sSL https://storage.googleapis.com/kubernetes-release/release/$(curl -s https://storage.googleapis.com/kubernetes-release/release/stable.txt)/bin/$HOSTOS/$HOSTARCH/kubectl >>$LOG 2>&1) >>$LOG 2>&1
783 (set -x; chmod 755 $GOPATH/bin/kubectl >>$LOG 2>&1) >>$LOG 2>&1
784 espin - $VERIFIED
785 fi
Test Userc13bdc92019-07-03 20:57:49 +0000786fi
David Bainbridgee87067b2019-08-12 22:00:12 +0000787if [ "$WITH_TIMINGS" == "yes" ]; then
David Bainbridge712afb82019-08-14 19:55:58 +0000788 printtime $(expr $(date +%s) - $STIME)
David Bainbridgee87067b2019-08-12 22:00:12 +0000789fi
Test Userc13bdc92019-07-03 20:57:49 +0000790
David Bainbridgee87067b2019-08-12 22:00:12 +0000791STIME=$(date +%s)
David K. Bainbridge0e89cb92019-07-17 11:30:10 -0700792if [ "$DEPLOY_K8S" == "no" ]; then
793 bspin "Skip Kubernetes/Kind Deployment"
794 espin $NO_ENTRY
795else
Test Userba1e7e72019-07-10 22:27:54 +0000796 bspin "Verify Kubernetes/Kind $HELM"
David K. Bainbridgefe1fa8a2019-11-12 12:03:21 -0800797 IS_INSTALLED=0
798 OP_TYPE="install"
Test Userba1e7e72019-07-10 22:27:54 +0000799 if [ -x $GOPATH/bin/kind ]; then
David K. Bainbridgefe1fa8a2019-11-12 12:03:21 -0800800 OP_TYPE="upgrade"
801 if [ $($GOPATH/bin/kind --version | grep -c $KIND_VERSION) -eq 1 ]; then
802 IS_INSTALLED=1
803 espin $VERIFIED
804 fi
805 fi
806 if [ $IS_INSTALLED -eq 0 ]; then
Test Userba1e7e72019-07-10 22:27:54 +0000807 espin $NOT_VERIFIED
David K. Bainbridgefe1fa8a2019-11-12 12:03:21 -0800808 bspin - "Download and $OP_TYPE Kubernetes/kind $DOWNLOAD"
David Bainbridge9e2a6662019-07-11 17:07:57 +0000809 (set -x; curl -o $GOPATH/bin/kind -sSL https://github.com/kubernetes-sigs/kind/releases/download/$KIND_VERSION/kind-$HOSTOS-$HOSTARCH >>$LOG 2>&1) >>$LOG 2>&1
Test Userba1e7e72019-07-10 22:27:54 +0000810 (set -x; chmod 755 $GOPATH/bin/kind >>$LOG 2>&1) >>$LOG 2>&1
811 espin - $VERIFIED
812 fi
David K. Bainbridgeb7285432019-07-02 22:05:24 -0700813fi
814
David Bainbridgee87067b2019-08-12 22:00:12 +0000815if [ "$WITH_TIMINGS" == "yes" ]; then
David Bainbridge712afb82019-08-14 19:55:58 +0000816 printtime $(expr $(date +%s) - $STIME)
David Bainbridgee87067b2019-08-12 22:00:12 +0000817fi
818
819STIME=$(date +%s)
David K. Bainbridge0e89cb92019-07-17 11:30:10 -0700820if [ "$INSTALL_HELM" == "no" ]; then
821 bspin "Skip Helm Install"
822 espin $NO_ENTRY
David K. Bainbridgeb7285432019-07-02 22:05:24 -0700823else
David K. Bainbridge0e89cb92019-07-17 11:30:10 -0700824 bspin "Verify Helm $HELM"
825 if [ -x $GOPATH/bin/helm ]; then
826 espin $VERIFIED
827 else
828 espin $NOT_VERIFIED
829 bspin - "Download and install Helm $DOWNLOAD"
David Bainbridgec6a6eb62019-10-18 22:50:07 +0000830 (set -x; curl -sSL https://git.io/get_helm.sh | DESIRED_VERSION=v2.14.3 USE_SUDO=false HELM_INSTALL_DIR=$GOPATH/bin bash >>$LOG 2>&1) >>$LOG 2>&1
David K. Bainbridge0e89cb92019-07-17 11:30:10 -0700831 espin - $VERIFIED
832 fi
David K. Bainbridgeb7285432019-07-02 22:05:24 -0700833fi
David K. Bainbridgefe1fa8a2019-11-12 12:03:21 -0800834
David Bainbridgee87067b2019-08-12 22:00:12 +0000835if [ "$WITH_TIMINGS" == "yes" ]; then
David Bainbridge712afb82019-08-14 19:55:58 +0000836 printtime $(expr $(date +%s) - $STIME)
David Bainbridgee87067b2019-08-12 22:00:12 +0000837fi
David K. Bainbridgeb7285432019-07-02 22:05:24 -0700838
David Bainbridgee87067b2019-08-12 22:00:12 +0000839STIME=$(date +%s)
Test Userb5712372019-07-03 21:52:17 +0000840bspin "Verify voltctl $HIGH_VOLTAGE"
David Bainbridged2811972019-12-14 01:14:09 +0000841VOK=0
842VMESSAGE="install"
David K. Bainbridgeebf38d92020-02-10 10:46:31 -0800843export VC_VERSION="$VOLTCTL_VERSION"
844if [ "$VC_VERSION" == "latest" ]; then
845 export VC_VERSION=$(curl -sSL https://api.github.com/repos/opencord/voltctl/releases/latest | jq -r .tag_name | sed -e 's/^v//g')
846fi
Test User3d7ad8e2019-07-03 06:15:44 +0000847if [ -x $GOPATH/bin/voltctl ]; then
David Bainbridge1ba64f12019-12-18 00:40:13 +0000848 VHAVE=$($GOPATH/bin/voltctl version --clientonly -o json | jq -r .version)
David K. Bainbridgeebf38d92020-02-10 10:46:31 -0800849 if [ $? -eq 0 -a "$VHAVE" == "$VC_VERSION" ]; then
David Bainbridged2811972019-12-14 01:14:09 +0000850 VOK=1
David Bainbridge1ba64f12019-12-18 00:40:13 +0000851 espin $VERIFIED
852 else
David K. Bainbridgeebf38d92020-02-10 10:46:31 -0800853 VCHECK=$(echo -e "$VHAVE\n$VC_VERSION" | sort -V | head -1)
854 if [ "$VCHECK" == "$VHAVE" ]; then
855 VMESSAGE="upgrade"
856 else
857 VMESSAGE="downgrade"
858 fi
David Bainbridged2811972019-12-14 01:14:09 +0000859 fi
860fi
861
David Bainbridge1ba64f12019-12-18 00:40:13 +0000862if [ $VOK -eq 0 ]; then
David K. Bainbridgeb7285432019-07-02 22:05:24 -0700863 espin $NOT_VERIFIED
David Bainbridged2811972019-12-14 01:14:09 +0000864 bspin - "Download and $VMESSAGE voltctl $DOWNLOAD"
David K. Bainbridgeebf38d92020-02-10 10:46:31 -0800865 (set -x; curl -o $GOPATH/bin/voltctl -sSL https://github.com/opencord/voltctl/releases/download/v$VC_VERSION/voltctl-$VC_VERSION-$HOSTOS-$HOSTARCH >>$LOG 2>&1) >>$LOG 2>&1
Test User08ebbd92019-07-03 17:15:39 +0000866 (set -x; chmod 755 $GOPATH/bin/voltctl >>$LOG 2>&1) >>$LOG 2>&1
David K. Bainbridgeb7285432019-07-02 22:05:24 -0700867 espin - $VERIFIED
868fi
David Bainbridgee87067b2019-08-12 22:00:12 +0000869if [ "$WITH_TIMINGS" == "yes" ]; then
David Bainbridge712afb82019-08-14 19:55:58 +0000870 printtime $(expr $(date +%s) - $STIME)
David Bainbridgee87067b2019-08-12 22:00:12 +0000871fi
David K. Bainbridgeb7285432019-07-02 22:05:24 -0700872
873bspin "Verify command PATH"
Test Userba1e7e72019-07-10 22:27:54 +0000874export PATH=$GOPATH/bin:$PATH
David K. Bainbridgeb7285432019-07-02 22:05:24 -0700875espin $VERIFIED
David K. Bainbridgeb7285432019-07-02 22:05:24 -0700876
David Bainbridgee87067b2019-08-12 22:00:12 +0000877STIME=$(date +%s)
Test Userba1e7e72019-07-10 22:27:54 +0000878if [ "$DEPLOY_K8S" == "yes" ]; then
David Bainbridge0774b232019-08-02 06:37:19 +0000879 HAVE=$(kind get clusters | grep -c voltha-$NAME)
Test Userba1e7e72019-07-10 22:27:54 +0000880 bspin "Verify Kubernetes/Kind Cluster"
881 sspin
882 if [ $HAVE -eq 0 ]; then
David Bainbridge491b1bd2019-07-11 17:53:11 +0000883 espin $NOT_VERIFIED
884 bspin - "Verify cluster configuration"
David Bainbridge0774b232019-08-02 06:37:19 +0000885 if [ ! -r ./$NAME-cluster.cfg ]; then
David Bainbridge491b1bd2019-07-11 17:53:11 +0000886 espin - $NOT_VERIFIED
David Bainbridge0774b232019-08-02 06:37:19 +0000887 bspin - "Download cluster configuration: $TYPE-cluster.cfg to $NAME-cluster.cfg $DOWNLOAD"
David K. Bainbridgea00736b2020-01-08 14:33:17 -0800888 ERR_OUT=$(mktemp)
889 (set -x; curl --fail -o ./$NAME-cluster.cfg -sSL https://raw.githubusercontent.com/ciena/kind-voltha/$VK_RELEASE/$TYPE-cluster.cfg >>$LOG 2>>$ERR_OUT) >>$LOG 2>&1
890 if [ $? -ne 0 ]; then
891 espin - $THEX
892 echo -e "${RED}${BOLD}${ERROR}ERROR: $NAME-cluster.cfg${NORMAL}${RED} - $(cat $ERR_OUT)${NORMAL}"
893 echo "ERROR: $(cat $ERR_OUT)" >>$LOG
894 rm -rf $ERR_OUT ./$NAME-cluster.cfg
895 exit 1
896 fi
897 rm -rf $ERR_OUT
898 else
David K. Bainbridge0e89cb92019-07-17 11:30:10 -0700899 espin - $VERIFIED
David K. Bainbridgea00736b2020-01-08 14:33:17 -0800900 fi
David Bainbridge0774b232019-08-02 06:37:19 +0000901 kind create cluster --name voltha-$NAME --config $NAME-cluster.cfg
David Bainbridge491b1bd2019-07-11 17:53:11 +0000902 else
903 espin $VERIFIED
Test Userba1e7e72019-07-10 22:27:54 +0000904 fi
905
David Bainbridge0774b232019-08-02 06:37:19 +0000906 export KUBECONFIG="$(kind get kubeconfig-path --name="voltha-$NAME")"
Test Userba1e7e72019-07-10 22:27:54 +0000907 P="coredns-.* \
David Bainbridge0774b232019-08-02 06:37:19 +0000908 etcd-voltha-$NAME-control-plane \
Test Userba1e7e72019-07-10 22:27:54 +0000909 kindnet-.* \
David Bainbridge0774b232019-08-02 06:37:19 +0000910 kube-apiserver-voltha-$NAME-control-plane \
911 kube-controller-manager-voltha-$NAME-control-plane \
Test Userba1e7e72019-07-10 22:27:54 +0000912 kube-proxy-.* \
David Bainbridge0774b232019-08-02 06:37:19 +0000913 kube-scheduler-voltha-$NAME-control-plane"
Test Userba1e7e72019-07-10 22:27:54 +0000914
915 EXPECT=$(test "$TYPE" == "minimal" && echo "12" || echo "14")
David Bainbridge4f1b5562019-08-19 04:46:52 +0000916 wait_for_pods - "kube-system" $EXPECT "includes" -1 "Waiting for system PODs to start" $P
David K. Bainbridgeb7285432019-07-02 22:05:24 -0700917fi
David Bainbridgee87067b2019-08-12 22:00:12 +0000918if [ "$WITH_TIMINGS" == "yes" ]; then
David Bainbridge712afb82019-08-14 19:55:58 +0000919 printtime $(expr $(date +%s) - $STIME)
David Bainbridgee87067b2019-08-12 22:00:12 +0000920fi
David K. Bainbridgeb7285432019-07-02 22:05:24 -0700921
David Bainbridgee87067b2019-08-12 22:00:12 +0000922STIME=$(date +%s)
David Bainbridge4c6289c2019-09-03 21:11:32 +0000923COUNT=$(count_pods "kube-system" ":Running:" "tiller-deploy-.*")
David K. Bainbridgeb7285432019-07-02 22:05:24 -0700924bspin "Verify Helm"
Test Userba1e7e72019-07-10 22:27:54 +0000925if [ $COUNT -ne 1 ]; then
David K. Bainbridgeb7285432019-07-02 22:05:24 -0700926 espin $NOT_VERIFIED
Test Userb5712372019-07-03 21:52:17 +0000927 echo -e "Configuring Helm $GEAR"
David K. Bainbridge0e89cb92019-07-17 11:30:10 -0700928 if [ "$INSTALL_HELM" == "no" ]; then
929 bspin - "Skip Helm/Tiller Initialization"
930 espin - $NO_ENTRY
931 else
932 bspin - "Initialize Helm"
933 (set -x; helm init --upgrade >>$LOG 2>&1) >>$LOG 2>&1
934 espin - $VERIFIED
David Bainbridge4f1b5562019-08-19 04:46:52 +0000935 wait_for_pods - "kube-system" 1 "includes" -1 "Waiting for Tiller POD to start" "tiller-deploy-.*"
David K. Bainbridge0e89cb92019-07-17 11:30:10 -0700936 fi
Test Userb5712372019-07-03 21:52:17 +0000937 bspin - "Add Google Incubator repository to Helm"
David K. Bainbridgeb7285432019-07-02 22:05:24 -0700938 (set -x; helm repo add incubator https://kubernetes-charts-incubator.storage.googleapis.com >>$LOG 2>&1) >>$LOG 2>&1
939 espin - $VERIFIED
Matteo Scandolo7ef6ba52019-10-04 09:20:37 -0700940
Test Userba1e7e72019-07-10 22:27:54 +0000941 # HACK (sort-of) - the config for tiller is about to be patched, which will
942 # cause the tiller pod to be recreated. This can sometimes cause a timing
943 # issue with the "wait_for_pods" call on tiller as it may incorrectly
Matteo Scandolo7ef6ba52019-10-04 09:20:37 -0700944 # identify the running/ready tiller pod that is soon to be terminated as
Test Userba1e7e72019-07-10 22:27:54 +0000945 # what it is waiting for. To avoid this issue we do a clean scale down and
Matteo Scandolo7ef6ba52019-10-04 09:20:37 -0700946 # scale up of the pod so the script controlls when it should be expecting
Test Userba1e7e72019-07-10 22:27:54 +0000947 # things
948 (set -x; kubectl -n kube-system scale deploy tiller-deploy --replicas=0 >>$LOG 2>&1) >>$LOG 2>&1
David K. Bainbridgeb7285432019-07-02 22:05:24 -0700949
Test Userb5712372019-07-03 21:52:17 +0000950 bspin - "Add Google Stable repository to Helm"
David K. Bainbridgeb7285432019-07-02 22:05:24 -0700951 (set -x; helm repo add stable https://kubernetes-charts.storage.googleapis.com >>$LOG 2>&1) >>$LOG 2>&1
952 espin - $VERIFIED
Test Userb5712372019-07-03 21:52:17 +0000953 bspin - "Add ONF repository to Helm"
David K. Bainbridgeb7285432019-07-02 22:05:24 -0700954 (set -x; helm repo add onf https://charts.opencord.org >>$LOG 2>&1) >>$LOG 2>&1
955 espin - $VERIFIED
Test Userb5712372019-07-03 21:52:17 +0000956 bspin - "Update Helm repository cache"
David K. Bainbridgeb7285432019-07-02 22:05:24 -0700957 (set -x; helm repo update >>$LOG 2>&1) >>$LOG 2>&1
958 espin - $VERIFIED
Matteo Scandolo7ef6ba52019-10-04 09:20:37 -0700959
David K. Bainbridgeb7285432019-07-02 22:05:24 -0700960 # Create and k8s service account so that Helm can create pods
Test Userb5712372019-07-03 21:52:17 +0000961 bspin - "Create Tiller ServiceAccount"
David K. Bainbridgeb7285432019-07-02 22:05:24 -0700962 (set -x; kubectl create serviceaccount --namespace kube-system tiller >>$LOG 2>&1) >>$LOG 2>&1
963 espin - $VERIFIED
Test Userb5712372019-07-03 21:52:17 +0000964 bspin - "Create Tiller ClusterRoleBinding"
David K. Bainbridgeb7285432019-07-02 22:05:24 -0700965 (set -x; kubectl create clusterrolebinding tiller-cluster-rule --clusterrole=cluster-admin --serviceaccount=kube-system:tiller >>$LOG 2>&1) >>$LOG 2>&1
966 espin - $VERIFIED
Test Userb5712372019-07-03 21:52:17 +0000967 bspin - "Update Tiller Manifest"
David K. Bainbridgeb7285432019-07-02 22:05:24 -0700968 (set -x; kubectl patch deploy --namespace kube-system tiller-deploy -p '{"spec":{"template":{"spec":{"serviceAccount":"tiller"}}}}' >>$LOG 2>&1) >>$LOG 2>&1
Test Userba1e7e72019-07-10 22:27:54 +0000969
970 # HACK (sort-of) - part to, spin it back up
971 (set -x; kubectl -n kube-system scale deploy tiller-deploy --replicas=1 >>$LOG 2>&1) >>$LOG 2>&1
David K. Bainbridgeb7285432019-07-02 22:05:24 -0700972 espin - $VERIFIED
973else
974 espin $VERIFIED
David Bainbridge46505fb2019-10-01 21:13:20 +0000975 if [ "$UPDATE_HELM_REPOS" == "yes" ]; then
976 bspin - "Update Helm repository cache"
977 (set -x; helm repo update >>$LOG 2>&1) >>$LOG 2>&1
978 espin - $VERIFIED
979 fi
David K. Bainbridgeb7285432019-07-02 22:05:24 -0700980fi
David Bainbridge4f1b5562019-08-19 04:46:52 +0000981wait_for_pods - "kube-system" 1 "includes" -1 "Waiting for Tiller POD to start" "tiller-deploy-.*"
David Bainbridgee87067b2019-08-12 22:00:12 +0000982if [ "$WITH_TIMINGS" == "yes" ]; then
David Bainbridge712afb82019-08-14 19:55:58 +0000983 printtime $(expr $(date +%s) - $STIME)
David Bainbridgee87067b2019-08-12 22:00:12 +0000984fi
David K. Bainbridgeb7285432019-07-02 22:05:24 -0700985
David Bainbridgee87067b2019-08-12 22:00:12 +0000986STIME=$(date +%s)
David Bainbridge0774b232019-08-02 06:37:19 +0000987bspin "Verify Helm values file: $NAME-values.yaml"
988if [ ! -r "./$NAME-values.yaml" ]; then
Test Userba1e7e72019-07-10 22:27:54 +0000989 espin $NOT_VERIFIED
David Bainbridge0774b232019-08-02 06:37:19 +0000990 bspin - "Download Helm values file: $TYPE-values.yaml to $NAME-values.yaml $DOWNLOAD"
David K. Bainbridgea00736b2020-01-08 14:33:17 -0800991 ERR_OUT=$(mktemp)
992 (set -x; curl --fail -o ./$NAME-values.yaml -sSL https://raw.githubusercontent.com/ciena/kind-voltha/$VK_RELEASE/$TYPE-values.yaml >>$LOG 2>$ERR_OUT) >>$LOG 2>&1
993 if [ $? -ne 0 ]; then
994 espin - $THEX
995 echo -e "${RED}${BOLD}${ERROR}ERROR: $NAME-values.yaml${NORMAL}${RED} - $(cat $ERR_OUT)${NORMAL}"
996 echo "ERROR: $(cat $ERR_OUT)" >>$LOG
997 rm -rf $ERR_OUT ./$NAME-values.yaml
998 exit 1
999 fi
1000 rm -rf $ERR_OUT
Test Userba1e7e72019-07-10 22:27:54 +00001001 espin - $VERIFIED
1002else
1003 espin $VERIFIED
1004fi
David Bainbridgee87067b2019-08-12 22:00:12 +00001005if [ "$WITH_TIMINGS" == "yes" ]; then
David Bainbridge712afb82019-08-14 19:55:58 +00001006 printtime $(expr $(date +%s) - $STIME)
David Bainbridgee87067b2019-08-12 22:00:12 +00001007fi
Test Userba1e7e72019-07-10 22:27:54 +00001008
David Bainbridge99ac7a22019-08-31 02:26:43 +00001009STIME=$(date +%s)
1010bspin "Verify or download chart specific values files $DOWNLOAD"
1011VALUES_FILES="monkey-values.yaml"
David K. Bainbridgea00736b2020-01-08 14:33:17 -08001012ERR_OUT=$(mktemp)
David Bainbridge99ac7a22019-08-31 02:26:43 +00001013for i in $VALUES_FILES; do
1014 if [ ! -r ./$i ]; then
David K. Bainbridgea00736b2020-01-08 14:33:17 -08001015 (set -x; curl --fail -o ./$i -sSL https://raw.githubusercontent.com/ciena/kind-voltha/$VK_RELEASE/$i >>$LOG 2>$ERR_OUT) >>$LOG 2>&1
1016 if [ $? -ne 0 ]; then
1017 espin $THEX
1018 echo -e "${RED}${BOLD}${ERROR}ERROR: $i${NORMAL}${RED} - $(cat $ERR_OUT)${NORMAL}"
1019 echo "ERROR: $i - $(cat $ERR_OUT)" >>$LOG
1020 rm -rf $ERR_OUT ./$i
1021 exit 1
1022 fi
1023 rm -rf $ERR_OUT
David Bainbridge99ac7a22019-08-31 02:26:43 +00001024 fi
1025done
1026espin $VERIFIED
1027if [ "$WITH_TIMINGS" == "yes" ]; then
1028 printtime $(expr $(date +%s) - $STIME)
1029fi
1030
1031if [ "$WITH_CHAOS" == "yes" ]; then
1032 bspin "Verify or clone kube-monkey helm chart $DOWNLOAD"
1033 if [ -r ./kube-monkey ]; then
1034 espin $VERIFIED
1035 else
1036 espin $NOT_VERIFIED
1037 bspin - "GIT clone kube-monkey"
1038 (set -x; git clone https://github.com/asobti/kube-monkey kube-monkey >>$LOG 2>&1) >>$LOG 2>&1
1039 espin - $VERIFIED
1040 fi
1041fi
1042
Test Userba1e7e72019-07-10 22:27:54 +00001043if [ "$JUST_K8S" == "yes" ]; then
1044 echo "Environment deployed, not deploying VOLTHA artifacts as requested. Good bye."
1045 echo ""
1046 echo "Please issue the following commands in your terminal to ensure that you" | tee -a $LOG
1047 echo "are accessing the correct Kubernetes/Kind cluster as well as have the " | tee -a $LOG
1048 echo "tools required by VOLTHA in your command path. " | tee -a $LOG
1049 echo "" | tee -a $LOG
1050 echo -en $BOLD
1051 if [ $DEPLOY_K8S == "yes" ]; then
David Bainbridge0774b232019-08-02 06:37:19 +00001052 echo "export KUBECONFIG=\"\$(./bin/kind get kubeconfig-path --name=\"voltha-$NAME\")\"" | tee -a $LOG
Test Userba1e7e72019-07-10 22:27:54 +00001053 fi
1054 echo "export PATH=$GOPATH/bin:\$PATH" | tee -a $LOG
1055 echo -en $NORMAL
1056 echo "" | tee -a $LOG
1057 echo "Thank you for choosing kind-voltha for you quick cluster needs." | tee -a $LOG
1058 exit 0
1059fi
1060
David Bainbridgee87067b2019-08-12 22:00:12 +00001061STIME=$(date +%s)
Test Userb5712372019-07-03 21:52:17 +00001062bspin "Verify ETCD Operator $OLD_KEY"
Test User7d866122019-07-09 17:52:35 +00001063if [ $(helm list --deployed --short --namespace voltha "^etcd-operator\$" | wc -l) -ne 1 ]; then
Matteo Scandolo7ef6ba52019-10-04 09:20:37 -07001064 espin $NOT_VERIFIED
David Bainbridge90fd8e32019-08-21 23:32:47 +00001065 helm_install - voltha etcd-operator stable/etcd-operator latest "Install ETCD Operator"
David K. Bainbridgeb7285432019-07-02 22:05:24 -07001066else
1067 espin $VERIFIED
1068fi
Test User01ed0642019-07-03 20:17:06 +00001069EXPECT=$(test "$TYPE" == "minimal" && echo "1" || echo "3")
David Bainbridge4f1b5562019-08-19 04:46:52 +00001070wait_for_pods - "voltha" $EXPECT "includes" -1 "Waiting for ETCD Operator to start" "etcd-operator-.*"
David Bainbridgee87067b2019-08-12 22:00:12 +00001071if [ "$WITH_TIMINGS" == "yes" ]; then
David Bainbridge712afb82019-08-14 19:55:58 +00001072 printtime $(expr $(date +%s) - $STIME)
David Bainbridgee87067b2019-08-12 22:00:12 +00001073fi
David K. Bainbridgeb7285432019-07-02 22:05:24 -07001074
David Bainbridgee87067b2019-08-12 22:00:12 +00001075STIME=$(date +%s)
David Bainbridgeb270c202019-07-26 01:44:42 +00001076if [ $WITH_ONOS == "yes" ]; then
1077 bspin "Verify ONOS installed $BIRD"
1078 if [ $(helm list --deployed --short --namespace default "^onos\$" | wc -l) -ne 1 ]; then
1079 espin $NOT_VERIFIED
Andrea Campanella6afcb082019-12-18 16:51:30 -08001080 EXTRA_HELM_FLAGS="$SET_TAG $EXTRA_HELM_FLAGS" helm_install - default onos onf/onos $ONOS_CHART_VERSION "Install ONOS"
David Bainbridgeb270c202019-07-26 01:44:42 +00001081 else
1082 espin $VERIFIED
1083 fi
David Bainbridge4f1b5562019-08-19 04:46:52 +00001084 wait_for_pods - "default" 1 "includes" -1 "Waiting for ONOS to start" "onos-.*"
Matteo Scandolo7ef6ba52019-10-04 09:20:37 -07001085
David Bainbridgeb270c202019-07-26 01:44:42 +00001086 bspin - "Forward ONOS API port $FORWARD"
David K. Bainbridgefe1fa8a2019-11-12 12:03:21 -08001087 kill_port_forward onos-ui
1088 port_forward default onos-ui $ONOS_API_PORT 8181
David Bainbridgeb270c202019-07-26 01:44:42 +00001089 espin - $VERIFIED
1090 bspin - "Forward ONOS SSH port $FORWARD"
David K. Bainbridgefe1fa8a2019-11-12 12:03:21 -08001091 kill_port_forward onos-ssh
1092 port_forward default onos-ssh $ONOS_SSH_PORT 8101
David Bainbridgeb270c202019-07-26 01:44:42 +00001093 espin - $VERIFIED
David Bainbridged31d6122019-08-13 19:37:59 +00001094 bspin - "Verify or download ONOS configuration support files $DOWNLOAD"
Matteo Scandolo78dfee02020-02-13 16:18:03 -08001095 ONOS_FILES="olt-onos-enableExtraneousRules.json onos-aaa.json \
David Bainbridge90fd8e32019-08-21 23:32:47 +00001096 onos-dhcpl2relay.json onos-kafka.json onos-sadis-sample.json"
David Bainbridged31d6122019-08-13 19:37:59 +00001097 (set -x; mkdir -p ./onos-files >>$LOG 2>&1) >>$LOG 2>&1
David K. Bainbridgea00736b2020-01-08 14:33:17 -08001098 ERR_OUT=$(mktemp)
David Bainbridge2b19e832019-08-16 02:40:53 +00001099 for i in $ONOS_FILES; do
David Bainbridged31d6122019-08-13 19:37:59 +00001100 if [ ! -r ./onos-files/$i ]; then
David K. Bainbridgea00736b2020-01-08 14:33:17 -08001101 (set -x; curl --fail -o ./onos-files/$i -sSL https://raw.githubusercontent.com/ciena/kind-voltha/$VK_RELEASE/onos-files/$i >>$LOG 2>$ERR_OUT) >>$LOG 2>&1
1102 if [ $? -ne 0 ]; then
1103 espin - $THEX
1104 echo -e "${RED}${BOLD}${ERROR}ERROR: $i${NORMAL}${RED} - $(cat $ERR_OUT)${NORMAL}"
1105 echo "ERROR: $(cat $ERR_OUT)" >>$LOG
1106 rm -rf $ERR_OUT ./onos-files/$i
1107 exit 1
1108 fi
1109 rm -rf $ERR_OUT
David Bainbridged31d6122019-08-13 19:37:59 +00001110 fi
1111 done
Test Userba1e7e72019-07-10 22:27:54 +00001112 espin - $VERIFIED
David Bainbridge27790d62019-08-13 22:43:19 +00001113
1114 if [ $INSTALL_ONOS_APPS == "yes" ]; then
1115 bspin - "Installing custom ONOS applications"
1116 if [ -x onos-files/onos-apps -a $(ls -1 onos-files/onos-apps/*.oar 2>/dev/null | wc -l) -gt 0 ]; then
1117 for OAR in $(ls -1 onos-files/onos-apps/*.oar); do
1118 sspin - "Installing custom ONOS applications - $OAR$CEOL"
David Bainbridge2b19e832019-08-16 02:40:53 +00001119 override_onos_app $OAR
David Bainbridge27790d62019-08-13 22:43:19 +00001120 done
1121 espin - "$VERIFIED Installing custom ONOS applications$CEOL"
1122 else
1123 espin - "$NOT_VERIFIED Installing custom ONOS applications - None Found"
1124 fi
1125 fi
Matteo Scandolo7ef6ba52019-10-04 09:20:37 -07001126
Matteo Scandolo9a77a732020-01-09 14:24:12 -08001127 check_onos_app_active org.opencord.kafka
Matteo Scandolo78dfee02020-02-13 16:18:03 -08001128 push_onos_config "file" "Push ONOS Kafka Configuration" "network/configuration/apps/org.opencord.kafka" "onos-files/onos-kafka.json"
Matteo Scandolo9a77a732020-01-09 14:24:12 -08001129 check_onos_app_active org.opencord.dhcpl2relay
Matteo Scandolo78dfee02020-02-13 16:18:03 -08001130 push_onos_config "file" "Push ONOS DHCP L2 Relay Configuration" "network/configuration/apps/org.opencord.dhcpl2relay" "onos-files/onos-dhcpl2relay.json"
Matteo Scandolo9a77a732020-01-09 14:24:12 -08001131 check_onos_app_active org.opencord.olt
Matteo Scandolo78dfee02020-02-13 16:18:03 -08001132 # FIXME use WITH_DHCP and WITH_EAPOL flags to configre OLT App
Hardik Windlassa7501fb2020-02-17 14:28:20 +00001133 # Default value for "enableEapol" is true in OLT App
Matteo Scandolo78dfee02020-02-13 16:18:03 -08001134 if [ $WITH_EAPOL == "yes" ]; then
1135 push_onos_config "json" "Enable VOLTHA ONOS EAPOL provisioning" "configuration/org.opencord.olt.impl.OltFlowService" '{"enableEapol":true}'
Hardik Windlassa7501fb2020-02-17 14:28:20 +00001136 elif [ $WITH_EAPOL == "no" ]; then
1137 push_onos_config "json" "Disable VOLTHA ONOS EAPOL provisioning" "configuration/org.opencord.olt.impl.OltFlowService" '{"enableEapol":false}'
Matteo Scandolo78dfee02020-02-13 16:18:03 -08001138 fi
Hardik Windlassa7501fb2020-02-17 14:28:20 +00001139 # Default value for "enableDhcpOnProvisioning" is false and for "enableDhcpV4" is true in OLT App
Matteo Scandolo78dfee02020-02-13 16:18:03 -08001140 if [ $WITH_DHCP == "yes" ]; then
1141 push_onos_config "json" "Enable VOLTHA ONOS DHCP provisioning" "configuration/org.opencord.olt.impl.OltFlowService" '{"enableDhcpOnProvisioning":true,"enableDhcpV4":true}'
Hardik Windlassa7501fb2020-02-17 14:28:20 +00001142 elif [ $WITH_DHCP == "no" ]; then
1143 push_onos_config "json" "Disable VOLTHA ONOS DHCP provisioning" "configuration/org.opencord.olt.impl.OltFlowService" '{"enableDhcpOnProvisioning":false,"enableDhcpV4":false}'
Matteo Scandolo78dfee02020-02-13 16:18:03 -08001144 fi
Hardik Windlassa7501fb2020-02-17 14:28:20 +00001145 # Default value for "enableIgmpOnProvisioning" is false in OLT App
Matteo Scandolo78dfee02020-02-13 16:18:03 -08001146 if [ $WITH_IGMP == "yes" ]; then
1147 push_onos_config "json" "Enable VOLTHA ONOS IGMP provisioning" "configuration/org.opencord.olt.impl.OltFlowService" '{"enableIgmpOnProvisioning":true}'
Hardik Windlassa7501fb2020-02-17 14:28:20 +00001148 elif [ $WITH_IGMP == "no" ]; then
1149 push_onos_config "json" "Disable VOLTHA ONOS IGMP provisioning" "configuration/org.opencord.olt.impl.OltFlowService" '{"enableIgmpOnProvisioning":false}'
Matteo Scandolo78dfee02020-02-13 16:18:03 -08001150 fi
1151 push_onos_config "file" "Enabling extraneous rules for ONOS" "configuration/org.onosproject.net.flow.impl.FlowRuleManager" "onos-files/olt-onos-enableExtraneousRules.json"
David Bainbridge2b19e832019-08-16 02:40:53 +00001152 if [ -f onos-files/onos-sadis.json ]; then
Matteo Scandolo78dfee02020-02-13 16:18:03 -08001153 push_onos_config "file" "[optional] Push ONOS SADIS Configuration" "network/configuration/apps/org.opencord.sadis" "onos-files/onos-sadis.json"
David Bainbridge2b19e832019-08-16 02:40:53 +00001154 elif [ "$CONFIG_SADIS" == "yes" ]; then
David Bainbridge90fd8e32019-08-21 23:32:47 +00001155 SADIS_CFG=onos-files/onos-sadis-sample.json
Matteo Scandolo9a77a732020-01-09 14:24:12 -08001156 check_onos_app_active org.opencord.sadis
Matteo Scandolo78dfee02020-02-13 16:18:03 -08001157 push_onos_config "file" "[optional] Push ONOS SADIS Configuration" "network/configuration/apps/org.opencord.sadis" "$SADIS_CFG"
David Bainbridge2b19e832019-08-16 02:40:53 +00001158 fi
Test Userba1e7e72019-07-10 22:27:54 +00001159fi
David Bainbridgee87067b2019-08-12 22:00:12 +00001160if [ "$WITH_TIMINGS" == "yes" ]; then
David Bainbridge712afb82019-08-14 19:55:58 +00001161 printtime $(expr $(date +%s) - $STIME)
David Bainbridgee87067b2019-08-12 22:00:12 +00001162fi
Test Userba1e7e72019-07-10 22:27:54 +00001163
David Bainbridgee87067b2019-08-12 22:00:12 +00001164STIME=$(date +%s)
Test Userb5712372019-07-03 21:52:17 +00001165bspin "Verify VOLTHA installed $HIGH_VOLTAGE"
Test User7d866122019-07-09 17:52:35 +00001166if [ $(helm list --deployed --short --namespace voltha "^voltha\$" | wc -l) -ne 1 ]; then
David K. Bainbridgeb7285432019-07-02 22:05:24 -07001167 espin $NOT_VERIFIED
David Bainbridge70c0ea82019-11-14 23:25:26 +00001168 if [ "$ONLY_ONE" == "yes" ]; then
1169 EXTRA_HELM_INSTALL_ARGS="--set therecanbeonlyone=true"=
1170 fi
David Bainbridge90fd8e32019-08-21 23:32:47 +00001171 helm_install - voltha voltha $VOLTHA_CHART $VOLTHA_CHART_VERSION "Install VOLTHA Core"
David Bainbridge70c0ea82019-11-14 23:25:26 +00001172 EXTRA_HELM_INSTALL_ARGS=
David K. Bainbridgeb7285432019-07-02 22:05:24 -07001173else
1174 espin $VERIFIED
1175fi
Test Userba1e7e72019-07-10 22:27:54 +00001176
David Bainbridge90fd8e32019-08-21 23:32:47 +00001177VOLTHA="voltha-ofagent-.* \
David K. Bainbridgeb7285432019-07-02 22:05:24 -07001178 ro-core.* \
1179 rw-core.* \
1180 voltha-api-server-.* \
David K. Bainbridgeb7285432019-07-02 22:05:24 -07001181 voltha-etcd-cluster-.* \
1182 voltha-kafka-.* \
1183 voltha-zookeeper-.*"
David Bainbridge70c0ea82019-11-14 23:25:26 +00001184if [ "$ONLY_ONE" == "yes" ]; then
David Bainbridge1ba64f12019-12-18 00:40:13 +00001185 EXPECT=$(test "$TYPE" == "minimal" && echo "5" || echo "7")
David Bainbridge70c0ea82019-11-14 23:25:26 +00001186else
David Bainbridge1ba64f12019-12-18 00:40:13 +00001187 EXPECT=$(test "$TYPE" == "minimal" && echo "8" || echo "10")
David Bainbridge70c0ea82019-11-14 23:25:26 +00001188fi
David Bainbridge4f1b5562019-08-19 04:46:52 +00001189wait_for_pods - "voltha" $EXPECT "includes" -1 "Waiting for VOLTHA Core to start" $VOLTHA
David Bainbridgee87067b2019-08-12 22:00:12 +00001190if [ "$WITH_TIMINGS" == "yes" ]; then
David Bainbridge712afb82019-08-14 19:55:58 +00001191 printtime $(expr $(date +%s) - $STIME)
David Bainbridgee87067b2019-08-12 22:00:12 +00001192fi
David K. Bainbridgeb7285432019-07-02 22:05:24 -07001193
David Bainbridge46505fb2019-10-01 21:13:20 +00001194if [ "$WITH_ADAPTERS" == "yes" ]; then
1195 STIME=$(date +%s)
1196 EXPECT=0
1197 echo -e "Verify Adapters $PLUG"
1198 if [ "$WITH_SIM_ADAPTERS" == "yes" ]; then
1199 bspin - "Verify Simulated Adapters installed"
1200 if [ $(helm list --deployed --short --namespace voltha "^sim\$" | wc -l) -ne 1 ]; then
1201 espin - $NOT_VERIFIED
1202 helm_install - voltha sim $VOLTHA_ADAPTER_SIM_CHART $VOLTHA_ADAPTER_SIM_CHART_VERSION "Install Simulated Adapters"
1203 else
1204 espin - $VERIFIED
1205 fi
1206 EXPECT=$(expr $EXPECT + 2)
1207 fi
Matteo Scandolo7ef6ba52019-10-04 09:20:37 -07001208
David Bainbridge46505fb2019-10-01 21:13:20 +00001209 if [ "$WITH_OPEN_ADAPTERS" == "yes" ]; then
1210 bspin - "Verify OpenOLT Adapter installed"
1211 if [ $(helm list --deployed --short --namespace voltha "^open-olt\$" | wc -l) -ne 1 ]; then
1212 espin - $NOT_VERIFIED
1213 helm_install - voltha open-olt $VOLTHA_ADAPTER_OPEN_OLT_CHART $VOLTHA_ADAPTER_OPEN_OLT_CHART_VERSION "Install OpenOLT Adapter"
1214 else
1215 espin - $VERIFIED
1216 fi
1217 bspin - "Verify OpenONU Adapter installed"
1218 if [ $(helm list --deployed --short --namespace voltha "^open-onu\$" | wc -l) -ne 1 ]; then
1219 espin - $NOT_VERIFIED
1220 helm_install - voltha open-onu $VOLTHA_ADAPTER_OPEN_ONU_CHART $VOLTHA_ADAPTER_OPEN_ONU_CHART_VERSION "Install OpenONU Adapter"
1221 else
1222 espin - $VERIFIED
1223 fi
1224 EXPECT=$(expr $EXPECT + 2)
1225 fi
Matteo Scandolo7ef6ba52019-10-04 09:20:37 -07001226
David Bainbridge46505fb2019-10-01 21:13:20 +00001227 ADAPTERS="adapter-.*"
1228 wait_for_pods - "voltha" $EXPECT "includes" -1 "Waiting for adapters to start" $ADAPTERS
1229 if [ "$WITH_TIMINGS" == "yes" ]; then
1230 printtime $(expr $(date +%s) - $STIME)
1231 fi
David Bainbridgee87067b2019-08-12 22:00:12 +00001232fi
David K. Bainbridgeb7285432019-07-02 22:05:24 -07001233
Test User7d866122019-07-09 17:52:35 +00001234if [ $WITH_BBSIM == "yes" ]; then
David Bainbridgee87067b2019-08-12 22:00:12 +00001235 STIME=$(date +%s)
Test User7d866122019-07-09 17:52:35 +00001236 echo -e "Verify BBSIM $PLUG"
David Bainbridge5b7b96b2019-07-25 20:29:13 +00001237 bspin - "Verify BBSIM Installed"
Test User7d866122019-07-09 17:52:35 +00001238 if [ $(helm list --deployed --short --namespace voltha "^bbsim\$" | wc -l) -ne 1 ]; then
1239 espin - $NOT_VERIFIED
David Bainbridge90fd8e32019-08-21 23:32:47 +00001240 helm_install - voltha bbsim $VOLTHA_BBSIM_CHART $VOLTHA_BBSIM_CHART_VERSION "Install BBSIM"
Test User7d866122019-07-09 17:52:35 +00001241 else
1242 espin - $VERIFIED
1243 fi
David Bainbridge4f1b5562019-08-19 04:46:52 +00001244 wait_for_pods - "voltha" 1 "includes" -1 "Waiting for BBSIM to start" "bbsim-.*"
David Bainbridgee87067b2019-08-12 22:00:12 +00001245 if [ "$WITH_TIMINGS" == "yes" ]; then
David Bainbridge712afb82019-08-14 19:55:58 +00001246 printtime $(expr $(date +%s) - $STIME)
David Bainbridgee87067b2019-08-12 22:00:12 +00001247 fi
Test User7d866122019-07-09 17:52:35 +00001248fi
1249
David Bainbridge5b7b96b2019-07-25 20:29:13 +00001250if [ $WITH_RADIUS == "yes" ]; then
David Bainbridgee87067b2019-08-12 22:00:12 +00001251 STIME=$(date +%s)
David Bainbridge5b7b96b2019-07-25 20:29:13 +00001252 echo -e "Verify RADIUS $LOCK"
1253 bspin - "Verify RADIUS Installed"
1254 if [ $(helm list --deployed --short --namespace voltha "^radius\$" | wc -l) -ne 1 ]; then
1255 espin - $NOT_VERIFIED
David Bainbridge90fd8e32019-08-21 23:32:47 +00001256 helm_install - voltha radius onf/freeradius latest "Install RADIUS"
David Bainbridge5b7b96b2019-07-25 20:29:13 +00001257 else
1258 espin - $VERIFIED
1259 fi
David Bainbridge4f1b5562019-08-19 04:46:52 +00001260 wait_for_pods - "voltha" 1 "includes" -1 "Waiting for RADIUS to start" "radius-.*"
David Bainbridgee87067b2019-08-12 22:00:12 +00001261 if [ "$WITH_TIMINGS" == "yes" ]; then
David Bainbridge712afb82019-08-14 19:55:58 +00001262 printtime $(expr $(date +%s) - $STIME)
David Bainbridgee87067b2019-08-12 22:00:12 +00001263 fi
David Bainbridge5b7b96b2019-07-25 20:29:13 +00001264fi
1265
David Bainbridgee87067b2019-08-12 22:00:12 +00001266STIME=$(date +%s)
Test Userb5712372019-07-03 21:52:17 +00001267bspin - "Forward VOLTHA API port $FORWARD"
David K. Bainbridgefe1fa8a2019-11-12 12:03:21 -08001268kill_port_forward voltha-api
1269port_forward voltha voltha-api $VOLTHA_API_PORT 55555
David K. Bainbridgeb7285432019-07-02 22:05:24 -07001270espin - $VERIFIED
David Bainbridgeac7f8072019-08-01 22:15:33 +00001271bspin - "Forward VOLTHA ETCD port $FORWARD"
David K. Bainbridgefe1fa8a2019-11-12 12:03:21 -08001272kill_port_forward voltha-etcd-cluster-client
1273port_forward voltha voltha-etcd-cluster-client $VOLTHA_ETCD_PORT 2379
David Bainbridgeac7f8072019-08-01 22:15:33 +00001274espin - $VERIFIED
David Bainbridgee87067b2019-08-12 22:00:12 +00001275if [ "$WITH_TIMINGS" == "yes" ]; then
David Bainbridge712afb82019-08-14 19:55:58 +00001276 printtime $(expr $(date +%s) - $STIME)
David Bainbridgee87067b2019-08-12 22:00:12 +00001277fi
Test User3d7ad8e2019-07-03 06:15:44 +00001278
David Bainbridgeb270c202019-07-26 01:44:42 +00001279if [ $WITH_ONOS == "yes" -a $WITH_RADIUS == "yes" ]; then
David Bainbridge5b7b96b2019-07-25 20:29:13 +00001280 bspin "Configure ONOS RADIUS Connection $GEAR"
Andy Bavier658ebef2019-11-05 17:22:56 -07001281 (set -x; cat onos-files/onos-aaa.json | sed -e "s/:RADIUS_IP:/$(kubectl -n voltha get service/radius -o jsonpath={.spec.clusterIP})/g" | curl --fail -sSL --user karaf:karaf -X POST http://127.0.0.1:$ONOS_API_PORT/onos/v1/network/configuration/apps/org.opencord.aaa -H Content-type:application/json -d@- >>$LOG 2>&1) >>$LOG 2>&1
David Bainbridge5b7b96b2019-07-25 20:29:13 +00001282 espin $VERIFIED
1283fi
1284
David Bainbridge99ac7a22019-08-31 02:26:43 +00001285if [ "$WITH_CHAOS" == "yes" ]; then
1286 STIME=$(date +%s)
1287 echo -e "Verify kube-monkey $LOCK"
1288 bspin - "Verify kube-monkey Installed"
1289 if [ $(helm list --deployed --short --namespace kube-monkey "^monkey\$" | wc -l) -ne 1 ]; then
1290 espin - $NOT_VERIFIED
1291 helm_install - kube-monkey monkey ./kube-monkey/helm/kubemonkey latest "Install Chaos Monkey"
1292 else
1293 espin - $VERIFIED
1294 fi
1295 wait_for_pods - "kube-monkey" 1 "includes" -1 "Waiting for Chaos to start" "monkey-.*"
1296 if [ "$WITH_TIMINGS" == "yes" ]; then
1297 printtime $(expr $(date +%s) - $STIME)
1298 fi
1299fi
1300
David Bainbridge5b7b96b2019-07-25 20:29:13 +00001301bspin "Create voltctl configuration file"
Test User3d7ad8e2019-07-03 06:15:44 +00001302(set -x; mkdir -p $HOME/.volt >>$LOG 2>&1) >>$LOG 2>&1
David Bainbridge0774b232019-08-02 06:37:19 +00001303(set -x; voltctl -a v2 -s localhost:$VOLTHA_API_PORT config > $HOME/.volt/config-$NAME 2>>$LOG) >>$LOG 2>&1
David Bainbridge5b7b96b2019-07-25 20:29:13 +00001304espin $VERIFIED
Test User08ebbd92019-07-03 17:15:39 +00001305
David Bainbridge0774b232019-08-02 06:37:19 +00001306if [ ! -f "$NAME-env.sh" ]; then
1307 touch $NAME-env.sh
David Bainbridgeb07fdf72019-07-29 22:51:40 +00001308fi
1309
David Bainbridge596f30d2019-07-30 17:07:59 +00001310for O in $ALL_OPTIONS; do
1311 VAL=$(eval echo \$$O)
David Bainbridge0774b232019-08-02 06:37:19 +00001312 if [ ! -z "$VAL" -a $(grep -c "^export $O=" $NAME-env.sh) -eq 0 ]; then
1313 echo "export $O=\"$(eval echo \$$O)\"" >> $NAME-env.sh
David Bainbridgeb07fdf72019-07-29 22:51:40 +00001314 fi
1315done
1316
David Bainbridge0774b232019-08-02 06:37:19 +00001317if [ $DEPLOY_K8S == "yes" -a $(grep -c "^export KUBECONFIG=" $NAME-env.sh) -eq 0 ]; then
1318 echo "export KUBECONFIG=\"$(./bin/kind get kubeconfig-path --name=voltha-$NAME)\"" >> $NAME-env.sh
David Bainbridgeb07fdf72019-07-29 22:51:40 +00001319fi
1320
David Bainbridge0774b232019-08-02 06:37:19 +00001321if [ $(grep -c "^export VOLTCONFIG=" $NAME-env.sh) -eq 0 ]; then
1322 echo "export VOLTCONFIG=\"$HOME/.volt/config-$NAME\"" >> $NAME-env.sh
David Bainbridgeb07fdf72019-07-29 22:51:40 +00001323fi
1324
David Bainbridge0774b232019-08-02 06:37:19 +00001325if [ $(grep -c "^export PATH=" $NAME-env.sh) -eq 0 ]; then
1326 echo "export PATH=\"$GOPATH/bin:\$PATH\"" >> $NAME-env.sh
David Bainbridgeb07fdf72019-07-29 22:51:40 +00001327fi
1328
Test User7d866122019-07-09 17:52:35 +00001329echo ""
Test User08ebbd92019-07-03 17:15:39 +00001330echo "Please issue the following commands in your terminal to ensure that you" | tee -a $LOG
1331echo "are accessing the correct Kubernetes/Kind cluster as well as have the " | tee -a $LOG
1332echo "tools required by VOLTHA in your command path. " | tee -a $LOG
1333echo "" | tee -a $LOG
Test User7d866122019-07-09 17:52:35 +00001334echo -en $BOLD
Test Userba1e7e72019-07-10 22:27:54 +00001335if [ $DEPLOY_K8S == "yes" ]; then
David Bainbridge0774b232019-08-02 06:37:19 +00001336 echo "export KUBECONFIG=\"\$(./bin/kind get kubeconfig-path --name=\"voltha-$NAME\")\"" | tee -a $LOG
Test Userba1e7e72019-07-10 22:27:54 +00001337fi
David Bainbridge0774b232019-08-02 06:37:19 +00001338echo "export VOLTCONFIG=\"$HOME/.volt/config-$NAME\"" | tee -a $LOG
Test Userba1e7e72019-07-10 22:27:54 +00001339echo "export PATH=$GOPATH/bin:\$PATH" | tee -a $LOG
Test User7d866122019-07-09 17:52:35 +00001340echo -en $NORMAL
Test User08ebbd92019-07-03 17:15:39 +00001341echo "" | tee -a $LOG
1342echo "Thank you for choosing kind-voltha for you quick cluster needs." | tee -a $LOG
1343
David Bainbridge712afb82019-08-14 19:55:58 +00001344if [ "$WITH_TIMINGS" == "yes" ]; then
David Bainbridgef858a022019-08-14 21:25:11 +00001345 echo -e "$CLOCK ${BOLD}TOTAL: $(duration $(expr $(date +%s) - $TOTAL_START_TIME))${NORMAL}"
David Bainbridge712afb82019-08-14 19:55:58 +00001346fi