blob: cdbcd967098ee90f6f9c60066b023697de2bd9c4 [file] [log] [blame]
David Bainbridgef81cd642019-11-20 00:14:47 +00001# Copyright 2017 - present Open Networking Foundation
Suchitra Vemuri65cd65f2019-08-30 14:39:22 -07002#
3# Licensed under the Apache License, Version 2.0 (the "License");
4# you may not use this file except in compliance with the License.
5# You may obtain a copy of the License at
6#
7# http://www.apache.org/licenses/LICENSE-2.0
8#
9# Unless required by applicable law or agreed to in writing, software
10# distributed under the License is distributed on an "AS IS" BASIS,
11# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
12# See the License for the specific language governing permissions and
13# limitations under the License.
Matteo Scandolo1294aeb2019-09-24 16:20:32 -070014# FIXME Can we use the same test against BBSim and Hardware?
15
Suchitra Vemuri65cd65f2019-08-30 14:39:22 -070016*** Settings ***
Zack Williamsec53a1b2019-09-16 15:50:52 -070017Documentation Test various end-to-end scenarios
Suchitra Vemuri65cd65f2019-08-30 14:39:22 -070018Suite Setup Setup Suite
Suchitra Vemuri65cd65f2019-08-30 14:39:22 -070019Test Setup Setup
20Test Teardown Teardown
Andy Bavierba9866b2019-10-11 07:11:53 -070021Suite Teardown Teardown Suite
Suchitra Vemuri65cd65f2019-08-30 14:39:22 -070022Library Collections
23Library String
24Library OperatingSystem
25Library XML
26Library RequestsLibrary
Andy Bavierba9866b2019-10-11 07:11:53 -070027Library ../../libraries/DependencyLibrary.py
Suchitra Vemurib8ed2d52019-09-30 13:22:51 -070028Resource ../../libraries/onos.robot
29Resource ../../libraries/voltctl.robot
David Bainbridgef81cd642019-11-20 00:14:47 +000030Resource ../../libraries/voltha.robot
Suchitra Vemurib8ed2d52019-09-30 13:22:51 -070031Resource ../../libraries/utils.robot
Andy Bavierba9866b2019-10-11 07:11:53 -070032Resource ../../libraries/k8s.robot
Suchitra Vemurib8ed2d52019-09-30 13:22:51 -070033Resource ../../variables/variables.robot
Suchitra Vemuri65cd65f2019-08-30 14:39:22 -070034
35*** Variables ***
Zack Williamsec53a1b2019-09-16 15:50:52 -070036${POD_NAME} flex-ocp-cord
37${KUBERNETES_CONF} ${KUBERNETES_CONFIGS_DIR}/${POD_NAME}.conf
38${KUBERNETES_CONFIGS_DIR} ~/pod-configs/kubernetes-configs
39#${KUBERNETES_CONFIGS_DIR} ${KUBERNETES_CONFIGS_DIR}/${POD_NAME}.conf
40${KUBERNETES_YAML} ${KUBERNETES_CONFIGS_DIR}/${POD_NAME}.yml
41${HELM_CHARTS_DIR} ~/helm-charts
42${VOLTHA_POD_NUM} 8
Zack Williamsa8fe75a2020-01-10 14:25:27 -070043${NAMESPACE} voltha
suraj gourd64356b2019-11-07 13:26:20 +000044# For below variable value, using deployment name as using grep for
45# parsing radius pod name, we can also use full radius pod name
Zack Williamsa8fe75a2020-01-10 14:25:27 -070046${RESTART_POD_NAME} radius
Andy Bavierba9866b2019-10-11 07:11:53 -070047${timeout} 60s
Zack Williamsec53a1b2019-09-16 15:50:52 -070048${of_id} 0
49${logical_id} 0
Andy Bavierba9866b2019-10-11 07:11:53 -070050${has_dataplane} True
Andy Bavierba9866b2019-10-11 07:11:53 -070051${teardown_device} False
Zack Williamsa8fe75a2020-01-10 14:25:27 -070052${scripts} ../../scripts
Suchitra Vemuri65cd65f2019-08-30 14:39:22 -070053
Gayathri.Selvan92d16862020-03-19 14:47:58 +000054# For dataplane bandwidth testing
55${upper_margin_pct} 105 # Allow 5% over the limit
Andy Bavierf6ab19c2020-05-14 10:34:47 -070056${lower_margin_pct} 92 # Allow 8% under the limit
Gayathri.Selvan92d16862020-03-19 14:47:58 +000057${udp_rate_multiplier} 1.10 # Send UDP at bw profile limit * rate_multiplier
58${udp_packet_bytes} 1400 # UDP payload in bytes
59
Andy Bavierabeba262020-02-07 16:22:16 -070060# Per-test logging on failure is turned off by default; set this variable to enable
61${container_log_dir} ${None}
62
Suchitra Vemuri65cd65f2019-08-30 14:39:22 -070063*** Test Cases ***
64Sanity E2E Test for OLT/ONU on POD
65 [Documentation] Validates E2E Ping Connectivity and object states for the given scenario:
66 ... Validate successful authentication/DHCP/E2E ping for the tech profile that is used
Andy Bavierba9866b2019-10-11 07:11:53 -070067 [Tags] sanity test1
Andy Baviere187eda2020-04-20 15:00:02 -070068 [Setup] Run Keywords Start Logging SanityTest
Andy Bavier4a8450e2020-02-04 08:58:37 -070069 ... AND Setup
70 [Teardown] Run Keywords Collect Logs
Andy Bavierabeba262020-02-07 16:22:16 -070071 ... AND Stop Logging SanityTest
Suchitra Vemuric5295a32019-12-15 20:32:04 -080072 Run Keyword If ${has_dataplane} Clean Up Linux
Zack Williamsa8fe75a2020-01-10 14:25:27 -070073 Wait Until Keyword Succeeds ${timeout} 2s Perform Sanity Test
Suchitra Vemuri65cd65f2019-08-30 14:39:22 -070074
Hema93762cf2020-01-29 19:59:28 +053075Test Disable and Enable OLT
76 [Documentation] Validates E2E Ping Connectivity and object states for the given scenario:
77 ... Assuming that test1 was executed where all the ONUs are authenticated/DHCP/pingable
78 ... Perform disable on the OLT and validate that the pings do not succeed
79 ... Perform enable on the OLT and validate that the pings are successful
Suchitra Vemuri14c9a032020-05-27 14:01:08 -070080 [Tags] functional VOL-2410 DisableEnableOLT notready
Andy Baviere187eda2020-04-20 15:00:02 -070081 [Setup] Start Logging DisableEnableOLT
Andy Bavier4a8450e2020-02-04 08:58:37 -070082 [Teardown] Run Keywords Collect Logs
Andy Bavierabeba262020-02-07 16:22:16 -070083 ... AND Stop Logging DisableEnableOLT
Hema93762cf2020-01-29 19:59:28 +053084 #Disable the OLT and verify the OLT/ONUs are disabled properly
85 ${rc} ${output}= Run and Return Rc and Output ${VOLTCTL_CONFIG}; voltctl device disable ${olt_device_id}
86 Should Be Equal As Integers ${rc} 0
87 Wait Until Keyword Succeeds ${timeout} 5s Validate OLT Device DISABLED UNKNOWN REACHABLE
88 ... ${olt_serial_number}
89 FOR ${I} IN RANGE 0 ${num_onus}
90 ${src}= Set Variable ${hosts.src[${I}]}
91 ${dst}= Set Variable ${hosts.dst[${I}]}
92 ${onu_device_id}= Get Device ID From SN ${src['onu']}
Hardik Windlass7c801e62020-05-04 19:33:21 +053093 ${onu_port}= Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s
94 ... Get ONU Port in ONOS ${src['onu']} ${of_id}
Hema93762cf2020-01-29 19:59:28 +053095 Wait Until Keyword Succeeds ${timeout} 5s Validate Device ENABLED DISCOVERED
96 ... UNREACHABLE ${src['onu']} onu=false
97 #Verify that ping fails
TorstenThieme754fec72020-02-18 07:24:46 +000098 Run Keyword If ${has_dataplane}
99 ... Run Keyword And Continue On Failure Wait Until Keyword Succeeds 60s 2s
Hema93762cf2020-01-29 19:59:28 +0530100 ... Check Ping False ${dst['dp_iface_ip_qinq']} ${src['dp_iface_name']}
Andrea Campanellaa6e17322020-05-04 14:31:44 +0200101 ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
Hardik Windlass7c801e62020-05-04 19:33:21 +0530102 # Remove Subscriber Access (To replicate ATT workflow)
103 Wait Until Keyword Succeeds ${timeout} 2s Execute ONOS CLI Command ${ONOS_SSH_IP}
104 ... ${ONOS_SSH_PORT} volt-remove-subscriber-access ${of_id} ${onu_port}
Hema93762cf2020-01-29 19:59:28 +0530105 END
106 #Enable the OLT back and check ONU, OLT status are back to "ACTIVE"
107 Enable Device ${olt_device_id}
108 Wait Until Keyword Succeeds ${timeout} 5s Validate OLT Device ENABLED ACTIVE REACHABLE
109 ... ${olt_serial_number}
Hemaf64d34c2020-03-25 00:40:17 +0530110 Wait Until Keyword Succeeds ${timeout} 5s Validate OLT Port Types
111 ... PON_OLT ETHERNET_NNI
Hardik Windlass7c801e62020-05-04 19:33:21 +0530112 Run Keyword If ${has_dataplane} Clean Up Linux
113 Wait Until Keyword Succeeds ${timeout} 2s Perform Sanity Test
Hema93762cf2020-01-29 19:59:28 +0530114
Suchitra Vemuri6db89412019-11-14 14:52:54 -0800115Test Disable and Enable ONU
116 [Documentation] Validates E2E Ping Connectivity and object states for the given scenario:
117 ... Assuming that test1 was executed where all the ONUs are authenticated/DHCP/pingable
118 ... Perform disable on the ONUs and validate that the pings do not succeed
119 ... Perform enable on the ONUs and validate that the pings are successful
Suchitra Vemuri04245f72020-01-08 16:43:24 -0800120 [Tags] functional DisableEnableONU released
Andy Baviere187eda2020-04-20 15:00:02 -0700121 [Setup] Start Logging DisableEnableONU
Andy Bavier4a8450e2020-02-04 08:58:37 -0700122 [Teardown] Run Keywords Collect Logs
Andy Bavierabeba262020-02-07 16:22:16 -0700123 ... AND Stop Logging DisableEnableONU
Suchitra Vemuri6db89412019-11-14 14:52:54 -0800124 FOR ${I} IN RANGE 0 ${num_onus}
125 ${src}= Set Variable ${hosts.src[${I}]}
126 ${dst}= Set Variable ${hosts.dst[${I}]}
Suchitra Vemuri6db89412019-11-14 14:52:54 -0800127 ${onu_device_id}= Get Device ID From SN ${src['onu']}
128 ${onu_port}= Wait Until Keyword Succeeds ${timeout} 2s Get ONU Port in ONOS ${src['onu']}
129 ... ${of_id}
130 Disable Device ${onu_device_id}
Andy Bavier46c8be32020-01-21 10:06:27 -0700131 Wait Until Keyword Succeeds 20s 2s Test Devices Disabled in VOLTHA Id=${onu_device_id}
Andy Bavier33e6dd32020-01-16 13:35:20 -0700132 Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure
133 ... Wait Until Keyword Succeeds 60s 2s
Zack Williamsa8fe75a2020-01-10 14:25:27 -0700134 ... Check Ping False ${dst['dp_iface_ip_qinq']} ${src['dp_iface_name']}
135 ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
Suchitra Vemuri6db89412019-11-14 14:52:54 -0800136 Enable Device ${onu_device_id}
137 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s
ubuntu6b6e7d42020-03-02 12:35:42 -0800138 ... Validate Subscriber DHCP Allocation ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${onu_port}
Hardik Windlass21807632020-04-14 16:24:55 +0530139 # Verify subscriber access flows are added for the ONU port
140 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
141 ... Verify Subscriber Access Flows Added For ONU ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${of_id}
142 ... ${onu_port} ${nni_port} ${src['c_tag']} ${src['s_tag']}
Andy Bavier33e6dd32020-01-16 13:35:20 -0700143 Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure
144 ... Wait Until Keyword Succeeds 60s 2s
Zack Williamsa8fe75a2020-01-10 14:25:27 -0700145 ... Check Ping True ${dst['dp_iface_ip_qinq']} ${src['dp_iface_name']}
146 ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
147 Run Keyword and Ignore Error Get Device Output from Voltha ${onu_device_id}
148 Run Keyword and Ignore Error Collect Logs
Suchitra Vemuri6db89412019-11-14 14:52:54 -0800149 END
150
Suchitra Vemuri5994cd12019-12-17 22:20:55 -0800151Test Subscriber Delete and Add
152 [Documentation] Validates E2E Ping Connectivity and object states for the given scenario:
153 ... Assuming that all the ONUs are authenticated/DHCP/pingable
Zack Williamsa8fe75a2020-01-10 14:25:27 -0700154 ... Delete a subscriber and validate that the pings do not succeed
Suchitra Vemuri5994cd12019-12-17 22:20:55 -0800155 ... Re-add the subscriber and validate that the pings are successful
Suchitra Vemuri04245f72020-01-08 16:43:24 -0800156 [Tags] functional SubAddDelete released
Andy Baviere187eda2020-04-20 15:00:02 -0700157 [Setup] Start Logging SubAddDelete
Andy Bavier4a8450e2020-02-04 08:58:37 -0700158 [Teardown] Run Keywords Collect Logs
Andy Bavierabeba262020-02-07 16:22:16 -0700159 ... AND Stop Logging SubAddDelete
Suchitra Vemuri5994cd12019-12-17 22:20:55 -0800160 FOR ${I} IN RANGE 0 ${num_onus}
161 ${src}= Set Variable ${hosts.src[${I}]}
162 ${dst}= Set Variable ${hosts.dst[${I}]}
Suchitra Vemuri5994cd12019-12-17 22:20:55 -0800163 ${onu_device_id}= Get Device ID From SN ${src['onu']}
164 ${onu_port}= Wait Until Keyword Succeeds ${timeout} 2s Get ONU Port in ONOS ${src['onu']}
165 ... ${of_id}
ubuntu6b6e7d42020-03-02 12:35:42 -0800166 Wait Until Keyword Succeeds ${timeout} 2s Execute ONOS CLI Command ${ONOS_SSH_IP}
Suchitra Vemuri5994cd12019-12-17 22:20:55 -0800167 ... ${ONOS_SSH_PORT} volt-remove-subscriber-access ${of_id} ${onu_port}
168 Sleep 10s
Suchitra Vemuri9da44302020-03-04 14:24:49 -0800169 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s
170 ... Verify No Pending Flows For ONU ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${onu_port}
Andy Bavier33e6dd32020-01-16 13:35:20 -0700171 Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure
172 ... Wait Until Keyword Succeeds 60s 2s
Zack Williamsa8fe75a2020-01-10 14:25:27 -0700173 ... Check Ping False ${dst['dp_iface_ip_qinq']} ${src['dp_iface_name']}
174 ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
ubuntu6b6e7d42020-03-02 12:35:42 -0800175 Wait Until Keyword Succeeds ${timeout} 2s Execute ONOS CLI Command ${ONOS_SSH_IP}
Suchitra Vemuri5994cd12019-12-17 22:20:55 -0800176 ... ${ONOS_SSH_PORT} volt-add-subscriber-access ${of_id} ${onu_port}
177 Sleep 10s
178 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s
Suchitra Vemuri9da44302020-03-04 14:24:49 -0800179 ... Verify No Pending Flows For ONU ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${onu_port}
180 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s
ubuntu6b6e7d42020-03-02 12:35:42 -0800181 ... Validate Subscriber DHCP Allocation ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${onu_port}
Hardik Windlass21807632020-04-14 16:24:55 +0530182 # Verify subscriber access flows are added for the ONU port
183 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
184 ... Verify Subscriber Access Flows Added For ONU ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${of_id}
185 ... ${onu_port} ${nni_port} ${src['c_tag']} ${src['s_tag']}
Andy Bavier33e6dd32020-01-16 13:35:20 -0700186 Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure
187 ... Wait Until Keyword Succeeds 60s 2s
Zack Williamsa8fe75a2020-01-10 14:25:27 -0700188 ... Check Ping True ${dst['dp_iface_ip_qinq']} ${src['dp_iface_name']}
189 ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
190 Run Keyword and Ignore Error Get Device Output from Voltha ${onu_device_id}
191 Run Keyword and Ignore Error Collect Logs
Suchitra Vemuri5994cd12019-12-17 22:20:55 -0800192 END
Suchitra Vemuri5994cd12019-12-17 22:20:55 -0800193
suraj gourd5cfdbb2019-12-13 12:44:55 +0000194Check DHCP attempt fails when subscriber is not added
195 [Documentation] Validates when removed subscriber access, DHCP attempt, ping fails and
196 ... when again added subscriber access, DHCP attempt, ping succeeds
Zack Williamsa8fe75a2020-01-10 14:25:27 -0700197 ... Assuming that test1 or sanity test was executed where all the ONUs are authenticated/DHCP/pingable
Suchitra Vemuri04245f72020-01-08 16:43:24 -0800198 [Tags] functional SubsRemoveDHCP released
Andy Baviere187eda2020-04-20 15:00:02 -0700199 [Setup] Start Logging SubsRemoveDHCP
Andy Bavier4a8450e2020-02-04 08:58:37 -0700200 [Teardown] Run Keywords Collect Logs
Andy Bavierabeba262020-02-07 16:22:16 -0700201 ... AND Stop Logging SubsRemoveDHCP
suraj gourd5cfdbb2019-12-13 12:44:55 +0000202 FOR ${I} IN RANGE 0 ${num_onus}
203 ${src}= Set Variable ${hosts.src[${I}]}
204 ${dst}= Set Variable ${hosts.dst[${I}]}
Zack Williamsa8fe75a2020-01-10 14:25:27 -0700205 ${onu_device_id}= Get Device ID From SN ${src['onu']}
suraj gourd5cfdbb2019-12-13 12:44:55 +0000206 ${onu_port}= Wait Until Keyword Succeeds ${timeout} 2s Get ONU Port in ONOS ${src['onu']}
207 ... ${of_id}
Suchitra Vemuri5994cd12019-12-17 22:20:55 -0800208 Run Keyword And Ignore Error Login And Run Command On Remote System killall dhclient ${src['ip']}
209 ... ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
210 Run Keyword And Ignore Error Login And Run Command On Remote System ps -ef | grep dhclient ${src['ip']}
211 ... ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
ubuntu6b6e7d42020-03-02 12:35:42 -0800212 Wait Until Keyword Succeeds ${timeout} 2s Execute ONOS CLI Command ${ONOS_SSH_IP}
suraj gourd5cfdbb2019-12-13 12:44:55 +0000213 ... ${ONOS_SSH_PORT} volt-remove-subscriber-access ${of_id} ${onu_port}
Suchitra Vemuri8f1d3062020-02-28 11:57:37 -0800214 Sleep 15s
Suchitra Vemuri5994cd12019-12-17 22:20:55 -0800215 Run Keyword And Ignore Error Login And Run Command On Remote System ps -ef | grep dhclient ${src['ip']}
216 ... ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
Zack Williamsa8fe75a2020-01-10 14:25:27 -0700217 Run Keyword If ${has_dataplane} Wait Until Keyword Succeeds ${timeout} 2s
218 ... Delete IP Addresses from Interface on Remote Host ${src['dp_iface_name']} ${src['ip']}
219 ... ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
220 Run Keyword And Ignore Error Login And Run Command On Remote System
221 ... ifconfig | grep -A 10 ens ${src['ip']}
Suchitra Vemuri5994cd12019-12-17 22:20:55 -0800222 ... ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
suraj gourd5cfdbb2019-12-13 12:44:55 +0000223 Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure Validate DHCP and Ping False
224 ... False ${src['dp_iface_name']} ${src['s_tag']} ${src['c_tag']} ${dst['dp_iface_ip_qinq']}
225 ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
226 ... ${dst['dp_iface_name']} ${dst['ip']} ${dst['user']} ${dst['pass']} ${dst['container_type']}
227 ... ${dst['container_name']}
ubuntu6b6e7d42020-03-02 12:35:42 -0800228 Wait Until Keyword Succeeds ${timeout} 2s Execute ONOS CLI Command ${ONOS_SSH_IP}
suraj gourd5cfdbb2019-12-13 12:44:55 +0000229 ... ${ONOS_SSH_PORT} volt-add-subscriber-access ${of_id} ${onu_port}
Suchitra Vemuri40fdf3c2020-05-28 23:41:03 -0700230 Sleep 10s
Suchitra Vemuri9da44302020-03-04 14:24:49 -0800231 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s
232 ... Verify No Pending Flows For ONU ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${onu_port}
Hardik Windlass21807632020-04-14 16:24:55 +0530233 # Verify subscriber access flows are added for the ONU port
234 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
235 ... Verify Subscriber Access Flows Added For ONU ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${of_id}
236 ... ${onu_port} ${nni_port} ${src['c_tag']} ${src['s_tag']}
suraj gourd5cfdbb2019-12-13 12:44:55 +0000237 Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure Validate DHCP and Ping True
238 ... True ${src['dp_iface_name']} ${src['s_tag']} ${src['c_tag']} ${dst['dp_iface_ip_qinq']}
239 ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
240 ... ${dst['dp_iface_name']} ${dst['ip']} ${dst['user']} ${dst['pass']} ${dst['container_type']}
241 ... ${dst['container_name']}
Suchitra Vemuri5994cd12019-12-17 22:20:55 -0800242 Run Keyword and Ignore Error Collect Logs
243 END
Suchitra Vemuri5994cd12019-12-17 22:20:55 -0800244
Suchitra Vemuri5994cd12019-12-17 22:20:55 -0800245Test Disable and Enable ONU scenario for ATT workflow
246 [Documentation] Validates E2E Ping Connectivity and object states for the given scenario:
247 ... Assuming that test1 was executed where all the ONUs are authenticated/DHCP/pingable
248 ... Perform disable on the ONUs, call volt-remove-subscriber and validate that the pings do not succeed
Zack Williamsa8fe75a2020-01-10 14:25:27 -0700249 ... Perform enable on the ONUs, authentication check, volt-add-subscriber-access and
250 ... validate that the pings are successful
Suchitra Vemuri5994cd12019-12-17 22:20:55 -0800251 ... VOL-2284
Suchitra Vemuria7dae322020-02-19 22:38:18 -0800252 [Tags] functional ATT_DisableEnableONU released
Andy Baviere187eda2020-04-20 15:00:02 -0700253 [Setup] Start Logging ATT_DisableEnableONU
Andy Bavier4a8450e2020-02-04 08:58:37 -0700254 [Teardown] Run Keywords Collect Logs
Andy Bavierabeba262020-02-07 16:22:16 -0700255 ... AND Stop Logging ATT_DisableEnableONU
Suchitra Vemuri5994cd12019-12-17 22:20:55 -0800256 FOR ${I} IN RANGE 0 ${num_onus}
257 ${src}= Set Variable ${hosts.src[${I}]}
258 ${dst}= Set Variable ${hosts.dst[${I}]}
Suchitra Vemuri5994cd12019-12-17 22:20:55 -0800259 ${onu_device_id}= Get Device ID From SN ${src['onu']}
260 ${onu_port}= Wait Until Keyword Succeeds ${timeout} 2s Get ONU Port in ONOS ${src['onu']}
261 ... ${of_id}
Suchitra Vemuri014b6032020-02-14 18:13:13 -0800262 Run Keyword And Continue On Failure Wait Until Keyword Succeeds 120s 2s
ubuntu6b6e7d42020-03-02 12:35:42 -0800263 ... Verify ONU Port Is Enabled ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${onu_port}
Suchitra Vemuri5994cd12019-12-17 22:20:55 -0800264 Disable Device ${onu_device_id}
Suchitra Vemuri3158f3c2020-05-28 17:58:26 -0700265 Sleep 10s
ubuntu6b6e7d42020-03-02 12:35:42 -0800266 Wait Until Keyword Succeeds ${timeout} 2s Execute ONOS CLI Command ${ONOS_SSH_IP}
Suchitra Vemuri5994cd12019-12-17 22:20:55 -0800267 ... ${ONOS_SSH_PORT} volt-remove-subscriber-access ${of_id} ${onu_port}
Zack Williamsa8fe75a2020-01-10 14:25:27 -0700268 Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure
269 ... Wait Until Keyword Succeeds 60s 2s Check Ping
270 ... False ${dst['dp_iface_ip_qinq']} ${src['dp_iface_name']}
271 ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
Suchitra Vemuri5994cd12019-12-17 22:20:55 -0800272 ... ELSE sleep 60s
273 Enable Device ${onu_device_id}
ubuntu6b6e7d42020-03-02 12:35:42 -0800274 Wait Until Keyword Succeeds ${timeout} 2s Verify Eapol Flows Added For ONU ${ONOS_SSH_IP}
Suchitra Vemuri5994cd12019-12-17 22:20:55 -0800275 ... ${ONOS_SSH_PORT} ${onu_port}
Zack Williamsa8fe75a2020-01-10 14:25:27 -0700276 Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure
277 ... Validate Authentication After Reassociate True
278 ... ${src['dp_iface_name']} ${src['ip']} ${src['user']} ${src['pass']}
Suchitra Vemuri5994cd12019-12-17 22:20:55 -0800279 ... ${src['container_type']} ${src['container_name']}
ubuntu6b6e7d42020-03-02 12:35:42 -0800280 Wait Until Keyword Succeeds ${timeout} 2s Verify ONU in AAA-Users ${ONOS_SSH_IP}
Zack Williamsa8fe75a2020-01-10 14:25:27 -0700281 ... ${ONOS_SSH_PORT} ${onu_port}
ubuntu6b6e7d42020-03-02 12:35:42 -0800282 Wait Until Keyword Succeeds ${timeout} 2s Execute ONOS CLI Command ${ONOS_SSH_IP}
Suchitra Vemuri5994cd12019-12-17 22:20:55 -0800283 ... ${ONOS_SSH_PORT} volt-add-subscriber-access ${of_id} ${onu_port}
Suchitra Vemuri3158f3c2020-05-28 17:58:26 -0700284 Sleep 10s
Hardik Windlass21807632020-04-14 16:24:55 +0530285 # Verify subscriber access flows are added for the ONU port
286 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
287 ... Verify Subscriber Access Flows Added For ONU ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${of_id}
288 ... ${onu_port} ${nni_port} ${src['c_tag']} ${src['s_tag']}
Suchitra Vemuri5994cd12019-12-17 22:20:55 -0800289 Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure Validate DHCP and Ping True
Andy Bavier08ae5852019-12-19 09:12:42 -0700290 ... True ${src['dp_iface_name']} ${src['s_tag']} ${src['c_tag']} ${dst['dp_iface_ip_qinq']}
Suchitra Vemuri5994cd12019-12-17 22:20:55 -0800291 ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
292 ... ${dst['dp_iface_name']} ${dst['ip']} ${dst['user']} ${dst['pass']} ${dst['container_type']}
293 ... ${dst['container_name']}
294 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s
ubuntu6b6e7d42020-03-02 12:35:42 -0800295 ... Validate Subscriber DHCP Allocation ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${onu_port}
Suchitra Vemuri5994cd12019-12-17 22:20:55 -0800296 Run Keyword and Ignore Error Collect Logs
suraj gourd5cfdbb2019-12-13 12:44:55 +0000297 END
suraj gourd5cfdbb2019-12-13 12:44:55 +0000298
Suchitra Vemuri937cd392020-01-12 17:10:42 -0800299Delete OLT, ReAdd OLT and Perform Sanity Test
300 [Documentation] Validates E2E Ping Connectivity and object states for the given scenario:
301 ... Disable and Delete the OLT
302 ... Create/Enable the same OLT again
303 ... Validate authentication/DHCP/E2E pings succeed for all the ONUs connected to the OLT
Suchitra Vemuria7dae322020-02-19 22:38:18 -0800304 [Tags] functional DeleteOLT released
Andy Baviere187eda2020-04-20 15:00:02 -0700305 [Setup] Start Logging DeleteOLT
Andy Bavier4a8450e2020-02-04 08:58:37 -0700306 [Teardown] Run Keywords Collect Logs
Andy Bavierabeba262020-02-07 16:22:16 -0700307 ... AND Stop Logging DeleteOLT
Suchitra Vemuri937cd392020-01-12 17:10:42 -0800308 Run Keyword If ${has_dataplane} Clean Up Linux
Hardik Windlass480f3e22020-04-02 20:14:14 +0530309 Delete Device and Verify
310 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
311 ... Verify Device Flows Removed ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${of_id}
Suchitra Vemuri937cd392020-01-12 17:10:42 -0800312 Run Keyword and Ignore Error Collect Logs
313 # Recreate the OLT
Hardik Windlass480f3e22020-04-02 20:14:14 +0530314 Setup
Suchitra Vemuri937cd392020-01-12 17:10:42 -0800315 Wait Until Keyword Succeeds ${timeout} 2s Perform Sanity Test
Suchitra Vemuri937cd392020-01-12 17:10:42 -0800316
Hema567f3012020-03-25 00:51:53 +0530317Check Mib State on OLT recreation after ONU, OLT deletion
318 [Documentation] Assuming that test1 was executed where all the ONUs are authenticated/DHCP/pingable,
319 ... Disable and Delete the ONU, Disable and Delete the OLT
320 ... Create/Enable the OLT again and Check for the Mib State of the ONUs
321 [Tags] functional CheckMibState notready
Andy Baviere187eda2020-04-20 15:00:02 -0700322 [Setup] Start Logging CheckMibState
Hema567f3012020-03-25 00:51:53 +0530323 [Teardown] Run Keywords Collect Logs
324 ... AND Stop Logging CheckMibState
Hema567f3012020-03-25 00:51:53 +0530325 #Disable and Delete the ONU
326 FOR ${I} IN RANGE 0 ${num_onus}
327 ${src}= Set Variable ${hosts.src[${I}]}
328 ${dst}= Set Variable ${hosts.dst[${I}]}
329 ${onu_device_id}= Get Device ID From SN ${src['onu']}
330 ${onu_port}= Wait Until Keyword Succeeds ${timeout} 2s Get ONU Port in ONOS ${src['onu']}
331 ... ${of_id}
332 Disable Device ${onu_device_id}
333 Wait Until Keyword Succeeds 20s 2s Test Devices Disabled in VOLTHA Id=${onu_device_id}
334 Delete Device ${onu_device_id}
335 END
336 #Disable and Delete the OLT
Hardik Windlass480f3e22020-04-02 20:14:14 +0530337 Delete Device and Verify
338 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
339 ... Verify Device Flows Removed ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${of_id}
340 # Recreate the OLT
Hema567f3012020-03-25 00:51:53 +0530341 Run Keyword If ${has_dataplane} Sleep 180s
342 ${olt_device_id}= Create Device ${olt_ip} ${OLT_PORT}
343 Set Suite Variable ${olt_device_id}
344 Wait Until Keyword Succeeds ${timeout} 5s Validate OLT Device PREPROVISIONED
345 ... UNKNOWN UNKNOWN ${olt_device_id}
346 Enable Device ${olt_device_id}
347 Wait Until Keyword Succeeds ${timeout} 5s Validate OLT Device ENABLED ACTIVE REACHABLE
348 ... ${olt_serial_number}
349 #Check for the ONU status and ONU Mib State should be "omci-flows-pushed"
350 FOR ${I} IN RANGE 0 ${num_onus}
351 ${src}= Set Variable ${hosts.src[${I}]}
352 ${dst}= Set Variable ${hosts.dst[${I}]}
353 ${onu_device_id}= Get Device ID From SN ${src['onu']}
354 ${onu_port}= Wait Until Keyword Succeeds ${timeout} 2s Get ONU Port in ONOS ${src['onu']}
355 ... ${of_id}
356 Wait Until Keyword Succeeds ${timeout} 5s Validate Device ENABLED ACTIVE
357 ... REACHABLE ${src['onu']} onu=True onu_reason=omci-flows-pushed
358 END
359
Hema783279b2020-01-22 15:37:37 +0530360Test disable ONUs and OLT then delete ONUs and OLT
361 [Documentation] On deployed POD, disable the ONU, disable the OLT and then delete ONU and OLT.
362 ... This TC is to confirm that ONU removal is not impacting OLT
363 ... Devices will be removed during the execution of this TC
364 ... so calling setup at the end to add the devices back to avoid the confusion.
Suchitra Vemuria7dae322020-02-19 22:38:18 -0800365 [Tags] functional VOL-2354 DisableDeleteONUandOLT released
Andy Baviere187eda2020-04-20 15:00:02 -0700366 [Setup] Start Logging DisableDeleteONUandOLT
Andy Bavier4a8450e2020-02-04 08:58:37 -0700367 [Teardown] Run Keywords Collect Logs
Andy Bavierabeba262020-02-07 16:22:16 -0700368 ... AND Stop Logging DisableDeleteONUandOLT
Suchitra Vemuriba4f3712020-01-24 16:18:26 -0800369 ${olt_device_id}= Get Device ID From SN ${olt_serial_number}
Hema783279b2020-01-22 15:37:37 +0530370 FOR ${I} IN RANGE 0 ${num_onus}
371 ${src}= Set Variable ${hosts.src[${I}]}
372 ${dst}= Set Variable ${hosts.dst[${I}]}
373 ${onu_device_id}= Get Device ID From SN ${src['onu']}
Suchitra Vemuri014b6032020-02-14 18:13:13 -0800374 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
375 ... Validate Device ENABLED ACTIVE
Hema783279b2020-01-22 15:37:37 +0530376 ... REACHABLE ${src['onu']} onu=True onu_reason=omci-flows-pushed
Suchitra Vemuri014b6032020-02-14 18:13:13 -0800377 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
378 ... Validate OLT Device ENABLED ACTIVE
Hema783279b2020-01-22 15:37:37 +0530379 ... REACHABLE ${olt_serial_number}
380 ${rc} ${output}= Run and Return Rc and Output
381 ... ${VOLTCTL_CONFIG}; voltctl device disable ${onu_device_id}
382 Should Be Equal As Integers ${rc} 0
Suchitra Vemuri014b6032020-02-14 18:13:13 -0800383 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
384 ... Validate Device DISABLED UNKNOWN
Hema783279b2020-01-22 15:37:37 +0530385 ... REACHABLE ${src['onu']} onu=false
Suchitra Vemuri014b6032020-02-14 18:13:13 -0800386 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
387 ... Validate OLT Device ENABLED ACTIVE
Hema783279b2020-01-22 15:37:37 +0530388 ... REACHABLE ${olt_serial_number}
389 END
390 ${rc} ${output}= Run and Return Rc and Output ${VOLTCTL_CONFIG}; voltctl device disable ${olt_device_id}
391 Should Be Equal As Integers ${rc} 0
Suchitra Vemuri014b6032020-02-14 18:13:13 -0800392 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
393 ... Validate OLT Device DISABLED UNKNOWN REACHABLE
Hema783279b2020-01-22 15:37:37 +0530394 ... ${olt_serial_number}
395 FOR ${I} IN RANGE 0 ${num_onus}
396 ${src}= Set Variable ${hosts.src[${I}]}
397 ${dst}= Set Variable ${hosts.dst[${I}]}
398 ${onu_device_id}= Get Device ID From SN ${src['onu']}
Suchitra Vemuri014b6032020-02-14 18:13:13 -0800399 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
400 ... Validate Device DISABLED DISCOVERED
401 ... UNREACHABLE ${src['onu']} onu=false
Hardik Windlass7da42ca2020-03-13 14:25:44 +0530402 Delete Device ${onu_device_id}
Suchitra Vemuri014b6032020-02-14 18:13:13 -0800403 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
404 ... Validate OLT Device DISABLED UNKNOWN
Hema783279b2020-01-22 15:37:37 +0530405 ... REACHABLE ${olt_serial_number}
406 END
Hardik Windlass7da42ca2020-03-13 14:25:44 +0530407 Delete Device ${olt_device_id}
Suchitra Vemuri014b6032020-02-14 18:13:13 -0800408 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s Test Empty Device List
Hardik Windlass480f3e22020-04-02 20:14:14 +0530409 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
410 ... Verify Device Flows Removed ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${of_id}
David Bainbridgef81cd642019-11-20 00:14:47 +0000411
Suchitra Vemuri9a6dd6d2020-02-28 17:46:26 -0800412Validate authentication on a disabled ONU
suraj gour472da1c2020-02-25 05:44:51 +0000413 [Documentation] Assuming that test1 was executed where all the ONUs are authenticated/DHCP/pingable
414 ... Perform disable on the ONUs and validate that the authentication do not succeed
415 ... Perform enable on the ONUs and validate that authentication successful
Suchitra Vemurif7a033c2020-02-26 17:22:41 -0800416 [Tags] functional DisableONU_AuthCheck
417 # Creates Devices in the Setup
Andy Baviere187eda2020-04-20 15:00:02 -0700418 [Setup] Run Keywords Start Logging DisableONU_AuthCheck
Suchitra Vemurif7a033c2020-02-26 17:22:41 -0800419 ... AND Setup
420 [Teardown] Run Keywords Collect Logs
421 ... AND Stop Logging DisableONU_AuthCheck
Suchitra Vemurif7a033c2020-02-26 17:22:41 -0800422 ... AND Delete Device and Verify
423 Run Keyword and Ignore Error Collect Logs
424 Run Keyword If ${has_dataplane} Clean Up Linux
425 Wait Until Keyword Succeeds ${timeout} 2s Perform Sanity Test
426 Clean WPA Process
suraj gour472da1c2020-02-25 05:44:51 +0000427 FOR ${I} IN RANGE 0 ${num_onus}
428 ${src}= Set Variable ${hosts.src[${I}]}
429 ${dst}= Set Variable ${hosts.dst[${I}]}
Suchitra Vemurif7a033c2020-02-26 17:22:41 -0800430 Run Keyword and Ignore Error Collect Logs
suraj gour472da1c2020-02-25 05:44:51 +0000431 ${onu_device_id}= Get Device ID From SN ${src['onu']}
432 ${onu_port}= Wait Until Keyword Succeeds ${timeout} 2s Get ONU Port in ONOS ${src['onu']}
433 ... ${of_id}
434 Disable Device ${onu_device_id}
435 Wait Until Keyword Succeeds ${timeout} 5s Validate Device DISABLED UNKNOWN
436 ... REACHABLE ${src['onu']} onu=false
Andy Bavier84834d42020-02-25 13:49:50 -0700437 ${wpa_log}= Run Keyword If ${has_dataplane} Catenate SEPARATOR=.
438 ... /tmp/wpa ${src['dp_iface_name']} log
Suchitra Vemurif7a033c2020-02-26 17:22:41 -0800439 Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure Validate Authentication False
440 ... ${src['dp_iface_name']} wpa_supplicant.conf ${src['ip']} ${src['user']} ${src['pass']}
Andy Bavier84834d42020-02-25 13:49:50 -0700441 ... ${src['container_type']} ${src['container_name']} ${wpa_log}
Suchitra Vemurif7a033c2020-02-26 17:22:41 -0800442 Enable Device ${onu_device_id}
443 Run Keyword And Ignore Error Kill Linux Process [w]pa_supplicant ${src['ip']}
444 ... ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
445 Run Keyword and Ignore Error Collect Logs
446 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s Validate Device
447 ... ENABLED ACTIVE REACHABLE ${src['onu']} onu=True onu_reason=omci-flows-pushed
448 Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure Validate Authentication True
449 ... ${src['dp_iface_name']} wpa_supplicant.conf ${src['ip']} ${src['user']} ${src['pass']}
Andy Bavier84834d42020-02-25 13:49:50 -0700450 ... ${src['container_type']} ${src['container_name']} ${wpa_log}
suraj gour472da1c2020-02-25 05:44:51 +0000451 Run Keyword and Ignore Error Get Device Output from Voltha ${onu_device_id}
452 END
453 Run Keyword and Ignore Error Collect Logs
454
Gayathri.Selvan92d16862020-03-19 14:47:58 +0000455Data plane verification using TCP
456 [Documentation] Test bandwidth profile is met and not exceeded for each subscriber.
457 ... Assumes iperf3 and jq installed on client and iperf -s running on DHCP server
Andy Bavier1b144eb2020-05-28 11:22:11 -0700458 [Tags] dataplane BandwidthProfileTCP VOL-2052 notready
Andy Bavierdfbcaef2020-05-27 15:34:18 -0700459 [Setup] Start Logging BandwidthProfileTCP
460 [Teardown] Run Keywords Collect Logs
461 ... AND Stop Logging BandwidthProfileTCP
Gayathri.Selvan92d16862020-03-19 14:47:58 +0000462 Pass Execution If '${has_dataplane}'=='False' Bandwidth profile validation can be done only in
463 ... physical pod. Skipping this test in BBSIM.
Andy Bavierd74f33c2020-05-12 12:45:36 -0700464 ${of_id}= Wait Until Keyword Succeeds ${timeout} 15s Validate OLT Device in ONOS ${olt_serial_number}
Gayathri.Selvan92d16862020-03-19 14:47:58 +0000465 FOR ${I} IN RANGE 0 ${num_onus}
466 ${src}= Set Variable ${hosts.src[${I}]}
467 ${dst}= Set Variable ${hosts.dst[${I}]}
Andy Bavierf6ab19c2020-05-14 10:34:47 -0700468
469 # Check for iperf3 and jq tools
470 ${stdout} ${stderr} ${rc}= Execute Remote Command which iperf3 jq
471 ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
472 Pass Execution If ${rc} != 0 Skipping test: iperf3 / jq not found on the RG
473
Gayathri.Selvan92d16862020-03-19 14:47:58 +0000474 ${onu_port}= Wait Until Keyword Succeeds ${timeout} 2s Get ONU Port in ONOS ${src['onu']}
475 ... ${of_id}
476 ${subscriber_id}= Set Variable ${of_id}/${onu_port}
477 ${bandwidth_profile_name} Get Bandwidth Profile Name For Given Subscriber ${subscriber_id}
478 ... upstreamBandwidthProfile
479 ${limiting_bw_value_upstream} Get Bandwidth Details ${bandwidth_profile_name}
480 ${bandwidth_profile_name} Get Bandwidth Profile Name For Given Subscriber ${subscriber_id}
481 ... downstreamBandwidthProfile
482 ${limiting_bw_value_dnstream} Get Bandwidth Details ${bandwidth_profile_name}
483
484 # Stream TCP packets from RG to server
485 ${updict}= Run Iperf3 Test Client ${src} server=${dst['dp_iface_ip_qinq']}
486 ... args=-t 30
487 ${actual_upstream_bw_used}= Evaluate ${updict['end']['sum_received']['bits_per_second']}/1000
488
489 # Stream TCP packets from server to RG
490 ${dndict}= Run Iperf3 Test Client ${src} server=${dst['dp_iface_ip_qinq']}
491 ... args=-R -t 30
492 ${actual_dnstream_bw_used}= Evaluate ${dndict['end']['sum_received']['bits_per_second']}/1000
493
494 ${pct_limit_up}= Evaluate 100*${actual_upstream_bw_used}/${limiting_bw_value_upstream}
495 ${pct_limit_dn}= Evaluate 100*${actual_dnstream_bw_used}/${limiting_bw_value_dnstream}
496 Log Up: bwprof ${limiting_bw_value_upstream}Kbps, got ${actual_upstream_bw_used}Kbps (${pct_limit_up}%)
497 Log Down: bwprof ${limiting_bw_value_dnstream}Kbps, got ${actual_dnstream_bw_used}Kbps (${pct_limit_dn}%)
498
499 Should Be True ${pct_limit_up} <= ${upper_margin_pct}
500 ... The upstream bandwidth exceeded the limit (${pct_limit_up}% of limit)
501 Should Be True ${pct_limit_dn} <= ${upper_margin_pct}
502 ... The downstream bandwidth exceeded the limit (${pct_limit_dn}% of limit)
503 Should Be True ${pct_limit_up} >= ${lower_margin_pct}
504 ... The upstream bandwidth guarantee was not met (${pct_limit_up}% of resv)
505 Should Be True ${pct_limit_dn} >= ${lower_margin_pct}
506 ... The downstream bandwidth guarantee was not met (${pct_limit_dn}% of resv)
507 END
508
509Data plane verification using UDP
510 [Documentation] Test bandwidth profile is met and not exceeded for each subscriber.
511 ... Assumes iperf3 and jq installed on client and iperf -s running on DHCP server
Andy Bavierdfbcaef2020-05-27 15:34:18 -0700512 [Tags] dataplane BandwidthProfileUDP VOL-2052 notready
513 [Setup] Start Logging BandwidthProfileUDP
514 [Teardown] Run Keywords Collect Logs
515 ... AND Stop Logging BandwidthProfileUDP
Gayathri.Selvan92d16862020-03-19 14:47:58 +0000516 Pass Execution If '${has_dataplane}'=='False' Bandwidth profile validation can be done only in
517 ... physical pod. Skipping this test in BBSIM.
Andy Bavierd74f33c2020-05-12 12:45:36 -0700518 ${of_id}= Wait Until Keyword Succeeds ${timeout} 15s Validate OLT Device in ONOS ${olt_serial_number}
Gayathri.Selvan92d16862020-03-19 14:47:58 +0000519 FOR ${I} IN RANGE 0 ${num_onus}
520 ${src}= Set Variable ${hosts.src[${I}]}
521 ${dst}= Set Variable ${hosts.dst[${I}]}
522 ${onu_port}= Wait Until Keyword Succeeds ${timeout} 2s Get ONU Port in ONOS ${src['onu']}
523 ... ${of_id}
524 ${subscriber_id}= Set Variable ${of_id}/${onu_port}
525 ${bandwidth_profile_name} Get Bandwidth Profile Name For Given Subscriber ${subscriber_id}
526 ... upstreamBandwidthProfile
527 ${limiting_bw_value_upstream} Get Bandwidth Details ${bandwidth_profile_name}
528 ${bandwidth_profile_name} Get Bandwidth Profile Name For Given Subscriber ${subscriber_id}
529 ... downstreamBandwidthProfile
530 ${limiting_bw_value_dnstream} Get Bandwidth Details ${bandwidth_profile_name}
531
532 # Stream UDP packets from RG to server
533 ${uprate}= Evaluate ${limiting_bw_value_upstream}*${udp_rate_multiplier}
534 ${updict}= Run Iperf3 Test Client ${src} server=${dst['dp_iface_ip_qinq']}
535 ... args=-u -b ${uprate}K -t 30 -l ${udp_packet_bytes}
536 # With UDP test, bits per second is the sending rate. Multiply by the loss rate to get the throughput.
537 ${actual_upstream_bw_used}= Evaluate
538 ... (100 - ${updict['end']['sum']['lost_percent']})*${updict['end']['sum']['bits_per_second']}/100000
539
540 # Stream UDP packets from server to RG
541 ${dnrate}= Evaluate ${limiting_bw_value_dnstream}*${udp_rate_multiplier}
542 ${dndict}= Run Iperf3 Test Client ${src} server=${dst['dp_iface_ip_qinq']}
543 ... args=-u -b ${dnrate}K -R -t 30 -l ${udp_packet_bytes}
544 # With UDP test, bits per second is the sending rate. Multiply by the loss rate to get the throughput.
545 ${actual_dnstream_bw_used}= Evaluate
546 ... (100 - ${dndict['end']['sum']['lost_percent']})*${dndict['end']['sum']['bits_per_second']}/100000
547
548 ${pct_limit_up}= Evaluate 100*${actual_upstream_bw_used}/${limiting_bw_value_upstream}
549 ${pct_limit_dn}= Evaluate 100*${actual_dnstream_bw_used}/${limiting_bw_value_dnstream}
550 Log Up: bwprof ${limiting_bw_value_upstream}Kbps, got ${actual_upstream_bw_used}Kbps (${pct_limit_up}%)
551 Log Down: bwprof ${limiting_bw_value_dnstream}Kbps, got ${actual_dnstream_bw_used}Kbps (${pct_limit_dn}%)
552
553 Should Be True ${pct_limit_up} <= ${upper_margin_pct}
554 ... The upstream bandwidth exceeded the limit (${pct_limit_up}% of limit)
555 Should Be True ${pct_limit_dn} <= ${upper_margin_pct}
556 ... The downstream bandwidth exceeded the limit (${pct_limit_dn}% of limit)
557 Should Be True ${pct_limit_up} >= ${lower_margin_pct}
558 ... The upstream bandwidth guarantee was not met (${pct_limit_up}% of resv)
559 Should Be True ${pct_limit_dn} >= ${lower_margin_pct}
560 ... The downstream bandwidth guarantee was not met (${pct_limit_dn}% of resv)
561 END
Suchitra Vemurif7a033c2020-02-26 17:22:41 -0800562
Suchitra Vemuri65cd65f2019-08-30 14:39:22 -0700563*** Keywords ***
564Setup Suite
Andy Bavier88cd9f62019-11-26 16:22:33 -0700565 [Documentation] Set up the test suite
566 Common Test Suite Setup
Suchitra Vemuri65cd65f2019-08-30 14:39:22 -0700567
David Bainbridgef81cd642019-11-20 00:14:47 +0000568Clear All Devices Then Create New Device
569 [Documentation] Remove any devices from VOLTHA and ONOS
David Bainbridgef81cd642019-11-20 00:14:47 +0000570 # Remove all devices from voltha and nos
571 Delete All Devices and Verify
David Bainbridgef81cd642019-11-20 00:14:47 +0000572 # Execute normal test Setup Keyword
573 Setup
574