blob: ff7f136263438ac196828f2a8f0448ef38046325 [file] [log] [blame]
TorstenThiemed4f48962020-12-08 12:17:19 +00001# Copyright 2020 - present Open Networking Foundation
2#
3# Licensed under the Apache License, Version 2.0 (the "License");
4# you may not use this file except in compliance with the License.
5# You may obtain a copy of the License at
6#
7# http://www.apache.org/licenses/LICENSE-2.0
8#
9# Unless required by applicable law or agreed to in writing, software
10# distributed under the License is distributed on an "AS IS" BASIS,
11# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
12# See the License for the specific language governing permissions and
13# limitations under the License.
14
TorstenThieme1619db22020-04-03 12:01:15 +000015*** Settings ***
TorstenThieme109683b2020-09-24 12:35:41 +000016Documentation Test states of ONU Go adapter with ATT workflows only (not for DT/TT workflow!)
TorstenThieme1619db22020-04-03 12:01:15 +000017Suite Setup Setup Suite
18Suite Teardown Teardown Suite
19Test Setup Setup
20Test Teardown Teardown
21Library Collections
22Library String
23Library OperatingSystem
24Library XML
25Library RequestsLibrary
26Library ../../libraries/DependencyLibrary.py
27Resource ../../libraries/onos.robot
28Resource ../../libraries/voltctl.robot
29Resource ../../libraries/voltha.robot
30Resource ../../libraries/utils.robot
31Resource ../../libraries/k8s.robot
TorstenThieme440b7c02020-12-18 15:42:57 +000032Resource ../../libraries/onu_utilities.robot
TorstenThiemefe7099e2021-01-29 08:41:04 +000033Resource ../../libraries/bbsim.robot
TorstenThieme1619db22020-04-03 12:01:15 +000034Resource ../../variables/variables.robot
35
36*** Variables ***
TorstenThieme440b7c02020-12-18 15:42:57 +000037${namespace} voltha
TorstenThiemed4f48962020-12-08 12:17:19 +000038${timeout} 60s
TorstenThieme1619db22020-04-03 12:01:15 +000039${of_id} 0
40${logical_id} 0
41${has_dataplane} True
42${external_libs} True
43${teardown_device} True
44${scripts} ../../scripts
45# Per-test logging on failure is turned off by default; set this variable to enable
46${container_log_dir} ${None}
TorstenThieme3385cdc2021-02-04 13:50:50 +000047# KV Store Prefix
48# example: -v kvstoreprefix:voltha_voltha
49${kvstoreprefix} voltha_voltha
TorstenThiemee0e5bba2020-08-05 11:20:13 +000050# state to test variable, can be passed via the command line too, valid values: 1-6
51# 1 -> activating-onu
52# 2 -> starting-openomci
53# 3 -> discovery-mibsync-complete
54# 4 -> initial-mib-downloaded
55# 5 -> tech-profile-config-download-success
56# 6 -> omci-flows-pushed
TorstenThieme87cd6202020-09-09 10:01:28 +000057# example: -v state2test:5
TorstenThieme66c91a82020-10-19 13:37:53 +000058# example: -v state2test:omci-flows-pushed
TorstenThieme1619db22020-04-03 12:01:15 +000059${state2test} 6
TorstenThiemee0e5bba2020-08-05 11:20:13 +000060# test mode variable, can be passed via the command line too, valid values: SingleState, Up2State, SingleStateTime
TorstenThieme87cd6202020-09-09 10:01:28 +000061# example: -v testmode:SingleStateTime
TorstenThieme1619db22020-04-03 12:01:15 +000062${testmode} SingleState
TorstenThieme87cd6202020-09-09 10:01:28 +000063# used tech profile, can be passed via the command line too, valid values: default (=1T1GEM), 1T4GEM, 1T8GEM
64# example: -v techprofile:1T4GEM
TorstenThiemee0e5bba2020-08-05 11:20:13 +000065${techprofile} default
TorstenThiemee0e5bba2020-08-05 11:20:13 +000066# flag debugmode is used, if true timeout calculation various, can be passed via the command line too
TorstenThieme87cd6202020-09-09 10:01:28 +000067# example: -v debugmode:True
TorstenThieme401af432020-06-11 15:53:53 +000068${debugmode} False
TorstenThiemee0e5bba2020-08-05 11:20:13 +000069# logging flag to enable Collect Logs, can be passed via the command line too
TorstenThieme87cd6202020-09-09 10:01:28 +000070# example: -v logging:True
TorstenThieme5e324e42020-07-27 09:36:16 +000071${logging} False
TorstenThieme66c91a82020-10-19 13:37:53 +000072# if True execution will be paused before clean up, only use in case of manual testing, do not use in ci pipeline!
TorstenThieme87cd6202020-09-09 10:01:28 +000073# example: -v pausebeforecleanup:True
TorstenThiemeb41007d2020-06-22 12:14:12 +000074${pausebeforecleanup} False
TorstenThiemed4f48962020-12-08 12:17:19 +000075# if True some outputs to console are done during running tests e.g. long duration flow test
76# example: -v print2console:True
77${print2console} False
TorstenThiemee0e5bba2020-08-05 11:20:13 +000078${data_dir} ../data
79
TorstenThieme1619db22020-04-03 12:01:15 +000080
81*** Test Cases ***
82ONU State Test
83 [Documentation] Validates the ONU Go adapter states
TorstenThieme66c91a82020-10-19 13:37:53 +000084 [Tags] sanityOnuGo StateTestOnuGo
TorstenThieme1619db22020-04-03 12:01:15 +000085 [Setup] Run Keywords Start Logging ONUStateTest
86 ... AND Setup Test
87 Run Keyword If ${has_dataplane} Clean Up Linux
TorstenThiemefd7e7ba2020-11-06 13:57:57 +000088 FOR ${I} IN RANGE 0 ${num_olts}
89 #get olt serial number
90 ${olt_serial_number}= Set Variable ${list_olts}[${I}][sn]
91 #validate olt states
92 ${olt_device_id}= Get OLTDeviceID From OLT List ${olt_serial_number}
93 Enable Device ${olt_device_id}
94 END
TorstenThieme94e4ae42020-05-18 13:01:42 +000095 ${timeStart} = Get Current Date
96 Set Global Variable ${timeStart}
TorstenThieme1619db22020-04-03 12:01:15 +000097 Run Keyword If "${testmode}"=="SingleState" Do ONU Single State Test
98 ... ELSE IF "${testmode}"=="Up2State" Do ONU Up To State Test
TorstenThieme94e4ae42020-05-18 13:01:42 +000099 ... ELSE IF "${testmode}"=="SingleStateTime" Do ONU Single State Test Time
TorstenThieme1619db22020-04-03 12:01:15 +0000100 ... ELSE Fail The testmode (${testmode}) is not valid!
TorstenThieme5e324e42020-07-27 09:36:16 +0000101 [Teardown] Run Keywords Run Keyword If ${logging} Collect Logs
TorstenThieme1619db22020-04-03 12:01:15 +0000102 ... AND Stop Logging ONUStateTest
103
TorstenThiemee0e5bba2020-08-05 11:20:13 +0000104Check Loaded Tech Profile
105 [Documentation] Validates the loaded Tech Profile
106 ... Assuming that ONU State Test was executed where all the ONUs are reached the expected state!
107 ... Check will be executed only the reached ONU state is 5 (tech-profile-config-download-success) or higher
TorstenThieme66c91a82020-10-19 13:37:53 +0000108 [Tags] functionalOnuGo CheckTechProfileOnuGo
TorstenThiemee0e5bba2020-08-05 11:20:13 +0000109 [Setup] Start Logging ONUCheckTechProfile
TorstenThieme66c91a82020-10-19 13:37:53 +0000110 Run Keyword If '${onu_state}'=='tech-profile-config-download-success' or '${onu_state}'=='omci-flows-pushed'
111 ... Do Check Tech Profile
TorstenThieme5a205ba2020-09-29 08:08:29 +0000112 ... ELSE Pass Execution ${skip_message} skipped
TorstenThiemee0e5bba2020-08-05 11:20:13 +0000113 [Teardown] Run Keywords Run Keyword If ${logging} Collect Logs
114 ... AND Stop Logging ONUCheckTechProfile
115
TorstenThieme401af432020-06-11 15:53:53 +0000116Onu Port Check
TorstenThieme87cd6202020-09-09 10:01:28 +0000117 [Documentation] Validates that all the UNI ports show up in ONOS
TorstenThieme00958682020-06-19 11:29:31 +0000118 ... Assuming that ONU State Test was executed where all the ONUs are reached the expected state!
TorstenThieme66c91a82020-10-19 13:37:53 +0000119 [Tags] functionalOnuGo PortTestOnuGo
TorstenThieme401af432020-06-11 15:53:53 +0000120 [Setup] Start Logging ONUPortTest
TorstenThiemed4f48962020-12-08 12:17:19 +0000121 Run Keyword If '${onu_state}'=='tech-profile-config-download-success' or '${onu_state}'=='omci-flows-pushed'
122 ... Do Onu Port Check
123 ... ELSE Pass Execution ${skip_message} skipped
TorstenThieme5e324e42020-07-27 09:36:16 +0000124 [Teardown] Run Keywords Run Keyword If ${logging} Collect Logs
TorstenThieme401af432020-06-11 15:53:53 +0000125 ... AND Stop Logging ONUPortTest
126
TorstenThieme17756ea2020-11-11 14:09:47 +0000127Onu Etcd Data Check
128 [Documentation] Validates ONU data stored in ETCD
129 ... Assuming that ONU State Test was executed where all the ONUs are reached the expected state!
130 [Tags] functionalOnuGo EtcdDataOnuGo
131 [Setup] Start Logging ONUEtcdDataTest
132 Run Keyword If '${onu_state}'=='tech-profile-config-download-success' or '${onu_state}'=='omci-flows-pushed'
133 ... Do Onu Etcd Data Check
134 ... ELSE Pass Execution ${skip_message} skipped
135 [Teardown] Run Keywords Run Keyword If ${logging} Collect Logs
136 ... AND Stop Logging ONUEtcdDataTest
137
TorstenThieme109683b2020-09-24 12:35:41 +0000138Onu Flow Check
139 [Documentation] Validates the onu flows in ONOS and Voltha
140 ... Assuming that ONU State Test was executed where all the ONUs are reached the expected state!
mpagenkoc2e7ba52020-11-12 13:50:57 +0000141 [Tags] functionalOnuGo FlowTestOnuGo
TorstenThieme109683b2020-09-24 12:35:41 +0000142 [Setup] Start Logging ONUFlowTest
TorstenThieme66c91a82020-10-19 13:37:53 +0000143 Run Keyword If '${onu_state}'=='omci-flows-pushed' Do Onu Flow Check
TorstenThieme5a205ba2020-09-29 08:08:29 +0000144 ... ELSE Pass Execution ${skip_message} skipped
TorstenThieme109683b2020-09-24 12:35:41 +0000145 [Teardown] Run Keywords Run Keyword If ${logging} Collect Logs
146 ... AND Stop Logging ONUFlowTest
147
TorstenThiemee3841a02020-09-23 08:20:43 +0000148Disable Enable Onu Device
149 [Documentation] Disables/enables ONU Device and check states
150 ... Assuming that ONU State Test was executed where all the ONUs are reached the expected state!
TorstenThieme66c91a82020-10-19 13:37:53 +0000151 [Tags] functionalOnuGo DisableEnableOnuGo
TorstenThiemee3841a02020-09-23 08:20:43 +0000152 [Setup] Start Logging DisableEnableONUDevice
TorstenThieme66c91a82020-10-19 13:37:53 +0000153 Run Keyword If '${onu_state}'=='tech-profile-config-download-success' or '${onu_state}'=='omci-flows-pushed'
154 ... Do Disable Enable Onu Test
TorstenThieme5a205ba2020-09-29 08:08:29 +0000155 ... ELSE Pass Execution ${skip_message} skipped
TorstenThiemee3841a02020-09-23 08:20:43 +0000156 [Teardown] Run Keywords Run Keyword If ${logging} Collect Logs
157 ... AND Stop Logging DisableEnableONUDevice
158
TorstenThieme5ca1dd12020-10-16 08:42:16 +0000159Power Off Power On Onu Device
160 [Documentation] Power off and Power on of all ONU Devices and check state
161 ... Assuming that ONU State Test was executed where all the ONUs are reached the expected state!
TorstenThieme66c91a82020-10-19 13:37:53 +0000162 [Tags] functionalOnuGo PowerOffPowerOnOnuGo
TorstenThieme5ca1dd12020-10-16 08:42:16 +0000163 [Setup] Start Logging PowerOffPowerOnONUDevice
TorstenThieme66c91a82020-10-19 13:37:53 +0000164 Run Keyword If '${onu_state}'=='tech-profile-config-download-success' or '${onu_state}'=='omci-flows-pushed'
165 ... Do Power Off Power On Onu Device
TorstenThieme5ca1dd12020-10-16 08:42:16 +0000166 ... ELSE Pass Execution ${skip_message} skipped
167 [Teardown] Run Keywords Run Keyword If ${logging} Collect Logs
168 ... AND Stop Logging PowerOffPowerOnONUDevice
169
TorstenThieme1fbe8082020-10-21 13:27:59 +0000170Soft Reboot Onu Device
171 [Documentation] Reboots softly all ONU Devices and check state
172 ... Assuming that ONU State Test was executed where all the ONUs are reached the expected state!
173 [Tags] functionalOnuGo SoftRebootOnuGo
174 [Setup] Start Logging SoftRebootONUDevice
175 Run Keyword If '${onu_state}'=='tech-profile-config-download-success' or '${onu_state}'=='omci-flows-pushed'
176 ... Do Soft Reboot Onu Device
177 ... ELSE Pass Execution ${skip_message} skipped
178 [Teardown] Run Keywords Run Keyword If ${logging} Collect Logs
179 ... AND Stop Logging SoftRebootONUDevice
180
TorstenThieme1619db22020-04-03 12:01:15 +0000181*** Keywords ***
182Setup Suite
183 [Documentation] Set up the test suite
TorstenThieme87cd6202020-09-09 10:01:28 +0000184 ${LogInfo}= Catenate
185 ... \r\nPassed arguments:
TorstenThieme66c91a82020-10-19 13:37:53 +0000186 ... state2test:${state2test}, testmode:${testmode}, techprofile:${techprofile},
TorstenThieme015d5c02020-09-11 09:53:34 +0000187 ... debugmode:${debugmode}, logging:${logging}, pausebeforecleanup:${pausebeforecleanup},
TorstenThiemed4f48962020-12-08 12:17:19 +0000188 ... print2console:${print2console}
TorstenThieme87cd6202020-09-09 10:01:28 +0000189 Log ${LogInfo} console=yes
TorstenThieme1619db22020-04-03 12:01:15 +0000190 Common Test Suite Setup
TorstenThieme5a205ba2020-09-29 08:08:29 +0000191 # prepare skip message in yellow for console log
192 ${skip}= Evaluate "\\033[33mSKIP\\033[0m"
193 ${skipped}= Evaluate "\\033[33m${SPACE*14} ===> Test case above was skipped! <=== ${SPACE*15}\\033[0m"
194 ${skip_message} Catenate ${skipped} | ${skip} |
195 Set Suite Variable ${skip_message}
TorstenThieme440b7c02020-12-18 15:42:57 +0000196 ${all_onu_timeout}= Run Keyword If ${num_all_onus}>4 Calculate Timeout ${timeout}
197 ... ELSE Set Variable ${timeout}
198 Set Suite Variable ${all_onu_timeout}
TorstenThieme1488d772020-09-28 10:52:43 +0000199 ${techprofile}= Set Variable If "${techprofile}"=="1T1GEM" default ${techprofile}
TorstenThieme73850052020-12-10 12:43:28 +0000200 Set Suite Variable ${techprofile}
TorstenThieme87cd6202020-09-09 10:01:28 +0000201 Run Keyword If "${techprofile}"=="default" Log To Console \nTechProfile:default (1T1GEM)
TorstenThiemee0e5bba2020-08-05 11:20:13 +0000202 ... ELSE IF "${techprofile}"=="1T4GEM" Set Tech Profile 1T4GEM
203 ... ELSE IF "${techprofile}"=="1T8GEM" Set Tech Profile 1T8GEM
204 ... ELSE Fail The TechProfile (${techprofile}) is not valid!
205 ${onos_ssh_connection} Open ONOS SSH Connection ${ONOS_SSH_IP} ${ONOS_SSH_PORT}
206 Set Suite Variable ${onos_ssh_connection}
TorstenThieme66c91a82020-10-19 13:37:53 +0000207 # map the passed onu state to reached and make it visible for test suite
208 ${admin_state} ${oper_status} ${connect_status} ${onu_state_nb} ${onu_state}=
209 ... Map State ${state2test}
210 Set Suite Variable ${admin_state}
211 Set Suite Variable ${oper_status}
212 Set Suite Variable ${connect_status}
213 Set Suite Variable ${onu_state_nb}
214 Set Suite Variable ${onu_state}
TorstenThieme5ca1dd12020-10-16 08:42:16 +0000215 # delete etcd MIB Template Data
216 Delete MIB Template Data
TorstenThieme45071602021-03-16 12:14:37 +0000217 # delete etcd onu data
218 Delete ONU Go Adapter ETCD Data validate=True
TorstenThieme1619db22020-04-03 12:01:15 +0000219
TorstenThiemeb41007d2020-06-22 12:14:12 +0000220Teardown Suite
221 [Documentation] Replaces the Suite Teardown in utils.robot.
222 ... Cleans up and checks all ONU ports disabled in ONOS.
223 ... Furthermore gives the possibility to pause the execution.
224 Run Keyword If ${pausebeforecleanup} Import Library Dialogs
225 Run Keyword If ${pausebeforecleanup} Pause Execution Press OK to continue with clean up!
TorstenThieme87cd6202020-09-09 10:01:28 +0000226 Run Keyword If ${pausebeforecleanup} Log Teardown will be continued... console=yes
TorstenThiemeb41007d2020-06-22 12:14:12 +0000227 Run Keyword If ${teardown_device} Delete All Devices and Verify
TorstenThieme45071602021-03-16 12:14:37 +0000228 Wait Until Keyword Succeeds ${timeout} 1s Validate Onu Data In Etcd 0 ${kvstoreprefix} without_pm_data=False
TorstenThiemed4f48962020-12-08 12:17:19 +0000229 Wait for Ports in ONOS for all OLTs ${onos_ssh_connection} 0 BBSM ${timeout}
TorstenThieme440b7c02020-12-18 15:42:57 +0000230 Close All ONOS SSH Connections
TorstenThieme87cd6202020-09-09 10:01:28 +0000231 Remove Tech Profile
TorstenThiemeb41007d2020-06-22 12:14:12 +0000232
TorstenThieme1619db22020-04-03 12:01:15 +0000233Setup Test
234 [Documentation] Pre-test Setup
235 #test for empty device list
236 Test Empty Device List
237 Run Keyword If ${has_dataplane} Wait Until Keyword Succeeds 120s 10s Openolt is Up
Suchitra Vemurib7253a52020-07-14 22:35:17 -0700238 ... ${olt_ssh_ip} ${olt_user} ${olt_pass}
TorstenThieme1619db22020-04-03 12:01:15 +0000239 Run Keyword If ${has_dataplane} Sleep 60s
TorstenThiemefd7e7ba2020-11-06 13:57:57 +0000240 # Create a list of olt ids (logical and device_id)
241 ${olt_ids} Create List
242 FOR ${I} IN RANGE 0 ${num_olts}
243 #create/preprovision device
Andrea Campanella3dcce272021-01-15 16:04:47 +0100244 ${olt_device_id}= Run Keyword If "${list_olts}[${I}][type]" == "${None}"
TorstenThieme44136642021-02-12 13:41:17 +0000245 ... Create Device ${list_olts}[${I}][ip] ${list_olts}[${I}][oltport]
246 ... ELSE Create Device ${list_olts}[${I}][ip] ${list_olts}[${I}][oltport] ${list_olts}[${I}][type]
TorstenThiemefd7e7ba2020-11-06 13:57:57 +0000247 ${olt_serial_number}= Set Variable ${list_olts}[${I}][sn]
248 #validate olt states
249 Wait Until Keyword Succeeds ${timeout} 5s
250 ... Validate OLT Device PREPROVISIONED UNKNOWN UNKNOWN ${olt_device_id}
251 Sleep 5s
252 ${logical_id}= Get Logical Device ID From SN ${olt_serial_number}
253 ${olt} Create Dictionary device_id ${olt_device_id} logical_id ${logical_id}
254 ... of_id ${of_id} sn ${olt_serial_number}
255 Append To List ${olt_ids} ${olt}
256 END
257 Set Global Variable ${olt_ids}
TorstenThieme1619db22020-04-03 12:01:15 +0000258
TorstenThieme1619db22020-04-03 12:01:15 +0000259Do ONU Up To State Test
260 [Documentation] This keyword performs Up2State Test
261 ... All states up to the passed have to be checked
TorstenThiemefd7e7ba2020-11-06 13:57:57 +0000262 FOR ${I} IN RANGE 0 ${num_all_onus}
TorstenThieme1619db22020-04-03 12:01:15 +0000263 ${src}= Set Variable ${hosts.src[${I}]}
264 ${dst}= Set Variable ${hosts.dst[${I}]}
TorstenThieme66c91a82020-10-19 13:37:53 +0000265 Run Keyword If ${onu_state_nb}>=1
TorstenThiemed4f48962020-12-08 12:17:19 +0000266 ... Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${all_onu_timeout} 50ms
TorstenThieme1619db22020-04-03 12:01:15 +0000267 ... Validate Device ENABLED ACTIVATING REACHABLE
268 ... ${src['onu']} onu=True onu_reason=activating-onu
TorstenThieme66c91a82020-10-19 13:37:53 +0000269 Run Keyword If ${onu_state_nb}>=2
TorstenThiemed4f48962020-12-08 12:17:19 +0000270 ... Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${all_onu_timeout} 50ms
TorstenThieme1619db22020-04-03 12:01:15 +0000271 ... Validate Device ENABLED ACTIVATING REACHABLE
272 ... ${src['onu']} onu=True onu_reason=starting-openomci
TorstenThieme66c91a82020-10-19 13:37:53 +0000273 Run Keyword If ${onu_state_nb}>=3
TorstenThiemed4f48962020-12-08 12:17:19 +0000274 ... Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${all_onu_timeout} 50ms
TorstenThieme1619db22020-04-03 12:01:15 +0000275 ... Validate Device ENABLED ACTIVATING REACHABLE
276 ... ${src['onu']} onu=True onu_reason=discovery-mibsync-complete
TorstenThieme66c91a82020-10-19 13:37:53 +0000277 Run Keyword If ${onu_state_nb}>=4
TorstenThiemed4f48962020-12-08 12:17:19 +0000278 ... Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${all_onu_timeout} 50ms
TorstenThieme1619db22020-04-03 12:01:15 +0000279 ... Validate Device ENABLED ACTIVE REACHABLE
280 ... ${src['onu']} onu=True onu_reason=initial-mib-downloaded
TorstenThieme66c91a82020-10-19 13:37:53 +0000281 Run Keyword If ${onu_state_nb}>=5
TorstenThiemed4f48962020-12-08 12:17:19 +0000282 ... Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${all_onu_timeout} 50ms
TorstenThieme1619db22020-04-03 12:01:15 +0000283 ... Validate Device ENABLED ACTIVE REACHABLE
284 ... ${src['onu']} onu=True onu_reason=tech-profile-config-download-success
TorstenThieme66c91a82020-10-19 13:37:53 +0000285 Run Keyword If ${onu_state_nb}>=6
TorstenThiemed4f48962020-12-08 12:17:19 +0000286 ... Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${all_onu_timeout} 50ms
TorstenThieme1619db22020-04-03 12:01:15 +0000287 ... Validate Device ENABLED ACTIVE REACHABLE
288 ... ${src['onu']} onu=True onu_reason=omci-flows-pushed
289 END
290
291Do ONU Single State Test
292 [Documentation] This keyword performs SingleState Test
293 ... Only the passed state has to be checked
TorstenThiemefd7e7ba2020-11-06 13:57:57 +0000294 FOR ${I} IN RANGE 0 ${num_all_onus}
TorstenThieme1619db22020-04-03 12:01:15 +0000295 ${src}= Set Variable ${hosts.src[${I}]}
296 ${dst}= Set Variable ${hosts.dst[${I}]}
TorstenThiemed4f48962020-12-08 12:17:19 +0000297 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${all_onu_timeout} 50ms
TorstenThieme015d5c02020-09-11 09:53:34 +0000298 ... Validate Device ${admin_state} ${oper_status} ${connect_status}
299 ... ${src['onu']} onu=True onu_reason=${onu_state}
TorstenThieme1619db22020-04-03 12:01:15 +0000300 END
301
TorstenThieme94e4ae42020-05-18 13:01:42 +0000302Do ONU Single State Test Time
303 [Documentation] This keyword performs SingleState Test with calculate running time
304 ... Only the passed state has to be checked and the duration each single onu adapter needed
305 ... will be calculated and printed out
TorstenThieme17becfc2020-10-08 09:46:27 +0000306 #${ListfinishedONUs} Create List
307 #Set Global Variable ${ListfinishedONUs}
TorstenThieme94e4ae42020-05-18 13:01:42 +0000308 Create File ONU_Startup_Time.txt This file contains the startup times of all ONUs.
309 ${list_onus} Create List
TorstenThieme401af432020-06-11 15:53:53 +0000310 Build ONU SN List ${list_onus}
TorstenThiemed4f48962020-12-08 12:17:19 +0000311 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${all_onu_timeout} 50ms
TorstenThieme9949b172020-06-16 10:00:15 +0000312 ... Validate ONU Devices MIB State With Duration
TorstenThiemed4f48962020-12-08 12:17:19 +0000313 ... ${onu_state} ${list_onus} ${timeStart} print2console=${print2console}
TorstenThieme401af432020-06-11 15:53:53 +0000314 ... output_file=ONU_Startup_Time.txt
TorstenThieme94e4ae42020-05-18 13:01:42 +0000315
TorstenThieme1619db22020-04-03 12:01:15 +0000316Do Onu Port Check
TorstenThieme00958682020-06-19 11:29:31 +0000317 [Documentation] Check that all the UNI ports show up in ONOS
TorstenThiemefe7099e2021-01-29 08:41:04 +0000318 Wait for Ports in ONOS for all OLTs ${onos_ssh_connection} ${num_all_onus} BBSM ${timeout}
TorstenThieme9949b172020-06-16 10:00:15 +0000319
TorstenThieme17756ea2020-11-11 14:09:47 +0000320Do Onu Etcd Data Check
321 [Documentation] Check Onu data stored in etcd
TorstenThieme3385cdc2021-02-04 13:50:50 +0000322 Validate Onu Data In Etcd defaultkvstoreprefix=${kvstoreprefix}
TorstenThieme17756ea2020-11-11 14:09:47 +0000323
TorstenThieme109683b2020-09-24 12:35:41 +0000324Do Onu Flow Check
TorstenThieme52ef8392020-11-10 13:42:26 +0000325 [Documentation] This keyword iterate all OLTs and performs Do Onu Flow Checks Per OLT
326 # Check and store vlan rules
327 ${firstvlanrules}= Run Keyword And Continue On Failure Validate Vlan Rules In Etcd
TorstenThieme3385cdc2021-02-04 13:50:50 +0000328 ... defaultkvstoreprefix=${kvstoreprefix}
TorstenThiemefd7e7ba2020-11-06 13:57:57 +0000329 FOR ${J} IN RANGE 0 ${num_olts}
330 ${olt_serial_number}= Set Variable ${list_olts}[${J}][sn]
331 ${onu_count}= Set Variable ${list_olts}[${J}][onucount]
332 ${of_id}= Wait Until Keyword Succeeds ${timeout} 15s Validate OLT Device in ONOS
333 ... ${olt_serial_number}
334 Set Global Variable ${of_id}
TorstenThiemed4f48962020-12-08 12:17:19 +0000335 # Verify Default Meter in ONOS (valid only for ATT)
336 Do Onu Subscriber Add Per OLT ${of_id} ${olt_serial_number} ${onu_count}
337 END
338 FOR ${J} IN RANGE 0 ${num_olts}
339 ${olt_serial_number}= Set Variable ${list_olts}[${J}][sn]
340 ${onu_count}= Set Variable ${list_olts}[${J}][onucount]
341 ${of_id}= Wait Until Keyword Succeeds ${timeout} 15s Validate OLT Device in ONOS
342 ... ${olt_serial_number}
343 Set Global Variable ${of_id}
TorstenThiemefd7e7ba2020-11-06 13:57:57 +0000344 ${nni_port}= Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s
345 ... Get NNI Port in ONOS ${of_id}
346 Set Global Variable ${nni_port}
347 # Verify Default Meter in ONOS (valid only for ATT)
TorstenThiemed4f48962020-12-08 12:17:19 +0000348 Do Onu Flow Check Per OLT ${of_id} ${nni_port} ${olt_serial_number} ${onu_count}
TorstenThiemefd7e7ba2020-11-06 13:57:57 +0000349 END
TorstenThieme52ef8392020-11-10 13:42:26 +0000350 #log flows for verification
351 ${flowsresult}= Execute ONOS CLI Command ${ONOS_SSH_IP} ${ONOS_SSH_PORT} flows -s
352 log ${flowsresult}
353 #check for previous state is kept (normally omci-flows-pushed)
354 Sleep 10s
TorstenThieme440b7c02020-12-18 15:42:57 +0000355 Run Keyword And Continue On Failure Current State Test All Onus ${state2test}
TorstenThieme52ef8392020-11-10 13:42:26 +0000356 ${secondvlanrules}= Run Keyword And Continue On Failure Validate Vlan Rules In Etcd nbofcookieslice=3
TorstenThieme3385cdc2021-02-04 13:50:50 +0000357 ... prevvlanrules=${firstvlanrules} defaultkvstoreprefix=${kvstoreprefix}
TorstenThieme52ef8392020-11-10 13:42:26 +0000358 FOR ${J} IN RANGE 0 ${num_olts}
359 ${olt_serial_number}= Set Variable ${list_olts}[${J}][sn]
360 ${onu_count}= Set Variable ${list_olts}[${J}][onucount]
361 ${of_id}= Wait Until Keyword Succeeds ${timeout} 15s Validate OLT Device in ONOS
362 ... ${olt_serial_number}
363 Set Global Variable ${of_id}
364 ${nni_port}= Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s
365 ... Get NNI Port in ONOS ${of_id}
366 Set Global Variable ${nni_port}
367 # Verify Default Meter in ONOS (valid only for ATT)
368 Do Onu Subscriber Remove Per OLT ${of_id} ${nni_port} ${olt_serial_number} ${onu_count}
369 END
370 #check for previous state is kept (normally omci-flows-pushed)
371 Sleep 10s
TorstenThiemed4f48962020-12-08 12:17:19 +0000372 Run Keyword If ${print2console} Log \r\nStart State Test All Onus. console=yes
TorstenThieme440b7c02020-12-18 15:42:57 +0000373 Run Keyword And Continue On Failure Current State Test All Onus ${state2test}
TorstenThiemed4f48962020-12-08 12:17:19 +0000374 Run Keyword If ${print2console} Log \r\nFinished State Test All Onus. console=yes
TorstenThieme52ef8392020-11-10 13:42:26 +0000375 Run Keyword And Continue On Failure Validate Vlan Rules In Etcd prevvlanrules=${firstvlanrules}
TorstenThieme3385cdc2021-02-04 13:50:50 +0000376 ... setvidequal=True defaultkvstoreprefix=${kvstoreprefix}
TorstenThiemefd7e7ba2020-11-06 13:57:57 +0000377
TorstenThiemed4f48962020-12-08 12:17:19 +0000378Do Onu Subscriber Add Per OLT
379 [Documentation] Add Subscriber per OLT
380 [Arguments] ${of_id} ${olt_serial_number} ${num_onus}
TorstenThiemefd7e7ba2020-11-06 13:57:57 +0000381 FOR ${I} IN RANGE 0 ${num_all_onus}
TorstenThieme109683b2020-09-24 12:35:41 +0000382 ${src}= Set Variable ${hosts.src[${I}]}
TorstenThiemefd7e7ba2020-11-06 13:57:57 +0000383 Continue For Loop If "${olt_serial_number}"!="${src['olt']}"
TorstenThieme109683b2020-09-24 12:35:41 +0000384 ${onu_device_id}= Get Device ID From SN ${src['onu']}
385 ${onu_port}= Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s
386 ... Get ONU Port in ONOS ${src['onu']} ${of_id}
387 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2
388 ... Execute ONOS CLI Command ${ONOS_SSH_IP} ${ONOS_SSH_PORT}
389 ... volt-add-subscriber-access ${of_id} ${onu_port}
TorstenThiemed4f48962020-12-08 12:17:19 +0000390 Run Keyword If ${print2console} Log \r\n[${I}] volt-add-subscriber-access ${of_id} ${onu_port}.
391 ... console=yes
392 END
393
394Do Onu Flow Check Per OLT
395 [Documentation] Checks all ONU flows show up in ONOS and Voltha
396 [Arguments] ${of_id} ${nni_port} ${olt_serial_number} ${num_onus}
397 FOR ${I} IN RANGE 0 ${num_all_onus}
398 ${src}= Set Variable ${hosts.src[${I}]}
399 Continue For Loop If "${olt_serial_number}"!="${src['olt']}"
400 ${onu_device_id}= Get Device ID From SN ${src['onu']}
401 ${onu_port}= Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s
402 ... Get ONU Port in ONOS ${src['onu']} ${of_id}
TorstenThieme109683b2020-09-24 12:35:41 +0000403 # Verify subscriber access flows are added for the ONU port
404 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
405 ... Verify Subscriber Access Flows Added For ONU ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${of_id}
406 ... ${onu_port} ${nni_port} ${src['c_tag']} ${src['s_tag']}
TorstenThiemed4f48962020-12-08 12:17:19 +0000407 ${logoutput} Catenate \r\n[${I}] Verify Subscriber Access Flows Added For
408 ... ONU ${of_id} ${onu_port} ${src['c_tag']} ${src['s_tag']}.
409 Run Keyword If ${print2console} Log ${logoutput} console=yes
TorstenThieme109683b2020-09-24 12:35:41 +0000410 END
TorstenThieme52ef8392020-11-10 13:42:26 +0000411
412Do Onu Subscriber Remove Per OLT
413 [Documentation] Removes per OLT subscribers in ONOS and Voltha
414 [Arguments] ${of_id} ${nni_port} ${olt_serial_number} ${num_onus}
415 FOR ${I} IN RANGE 0 ${num_all_onus}
416 ${src}= Set Variable ${hosts.src[${I}]}
417 ${dst}= Set Variable ${hosts.dst[${I}]}
418 Continue For Loop If "${olt_serial_number}"!="${src['olt']}"
419 ${onu_device_id}= Get Device ID From SN ${src['onu']}
420 ${onu_port}= Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s
421 ... Get ONU Port in ONOS ${src['onu']} ${of_id}
422 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2
423 ... Execute ONOS CLI Command ${ONOS_SSH_IP} ${ONOS_SSH_PORT}
424 ... volt-remove-subscriber-access ${of_id} ${onu_port}
TorstenThiemed4f48962020-12-08 12:17:19 +0000425 Run Keyword If ${print2console} Log \r\n[${I}] volt-remove-subscriber-access ${of_id} ${onu_port}.
426 ... console=yes
TorstenThieme52ef8392020-11-10 13:42:26 +0000427 END
TorstenThieme109683b2020-09-24 12:35:41 +0000428
TorstenThiemee0e5bba2020-08-05 11:20:13 +0000429Do Check Tech Profile
430 [Documentation] This keyword checks the loaded TechProfile
431 ${namespace}= Set Variable default
Andrea Campanella60dde302020-09-09 18:42:56 +0200432 ${podname}= Set Variable etcd
TorstenThieme3385cdc2021-02-04 13:50:50 +0000433 ${kvstoreprefix}= Get Kv Store Prefix
TorstenThiemee0e5bba2020-08-05 11:20:13 +0000434 ${commandget} Catenate
TorstenThieme3385cdc2021-02-04 13:50:50 +0000435 ... /bin/sh -c 'ETCDCTL_API=3 etcdctl get --prefix service/${kvstoreprefix}/technology_profiles/XGS-PON/64'
Holger Hildebrandt23147742020-11-16 10:13:21 +0000436 ${result}= Exec Pod In Kube ${namespace} ${podname} ${commandget}
TorstenThiemee0e5bba2020-08-05 11:20:13 +0000437 ${num_gem_ports}= Set Variable 1
438 ${num_gem_ports}= Set Variable If
439 ... "${techprofile}"=="default" 1
440 ... "${techprofile}"=="1T4GEM" 4
441 ... "${techprofile}"=="1T8GEM" 8
442 @{resultList} Split String ${result} separator=,
443 ${num_of_count_matches}= Get Match Count ${resultList} "num_gem_ports": ${num_gem_ports}
444 ... whitespace_insensitive=True
TorstenThiemea0221942020-12-09 11:35:03 +0000445 ${num_of_expected_matches}= Evaluate ${num_all_onus}
TorstenThiemea0221942020-12-09 11:35:03 +0000446 Should Be Equal As Integers ${num_of_expected_matches} ${num_of_count_matches}
447 ... TechProfile (${TechProfile}) not loaded correctly:${num_of_count_matches} of ${num_of_expected_matches}
TorstenThieme015d5c02020-09-11 09:53:34 +0000448
449Do Disable Enable Onu Test
450 [Documentation] This keyword disables/enables all onus and checks the states.
TorstenThieme1fbe8082020-10-21 13:27:59 +0000451 [Arguments] ${state2check}=${state2test} ${checkstatebeforedisable}=True
TorstenThiemefd7e7ba2020-11-06 13:57:57 +0000452 ... ${state2checkafterdisable}=tech-profile-config-delete-success
TorstenThieme440b7c02020-12-18 15:42:57 +0000453 Run Keyword If ${checkstatebeforedisable} Current State Test All Onus ${state2check}
454 Disable Onu Device
TorstenThiemed4f48962020-12-08 12:17:19 +0000455 ${alternative_onu_reason}= Set Variable If
456 ... '${state2checkafterdisable}'=='tech-profile-config-delete-success' omci-flows-deleted
457 ... '${state2checkafterdisable}'=='omci-admin-lock' tech-profile-config-delete-success ${EMPTY}
TorstenThiemec3c23232021-01-13 13:06:31 +0000458 ${alternativeonustates}= Create List ${alternative_onu_reason}
459 Current State Test All Onus ${state2checkafterdisable} alternativeonustate=${alternativeonustates}
TorstenThieme17becfc2020-10-08 09:46:27 +0000460 Log Ports
461 #check no port is enabled in ONOS
TorstenThiemed4f48962020-12-08 12:17:19 +0000462 Wait for Ports in ONOS for all OLTs ${onos_ssh_connection} 0 BBSM
TorstenThieme440b7c02020-12-18 15:42:57 +0000463 Enable Onu Device
464 Current State Test All Onus ${state2check}
TorstenThieme17becfc2020-10-08 09:46:27 +0000465 Log Ports onlyenabled=True
466 #check that all the UNI ports show up in ONOS again
TorstenThiemed4f48962020-12-08 12:17:19 +0000467 Wait for Ports in ONOS for all OLTs ${onos_ssh_connection} ${num_all_onus} BBSM
TorstenThieme015d5c02020-09-11 09:53:34 +0000468
TorstenThieme5ca1dd12020-10-16 08:42:16 +0000469Do Power Off Power On Onu Device
470 [Documentation] This keyword power off/on all onus and checks the states.
TorstenThieme440b7c02020-12-18 15:42:57 +0000471 Power Off ONU Device ${namespace}
TorstenThieme5ca1dd12020-10-16 08:42:16 +0000472 Sleep 5s
TorstenThiemec3c23232021-01-13 13:06:31 +0000473 ${alternativeonustates}= Create List omci-flows-deleted
TorstenThieme440b7c02020-12-18 15:42:57 +0000474 Current State Test All Onus tech-profile-config-delete-success
TorstenThiemec3c23232021-01-13 13:06:31 +0000475 ... ENABLED DISCOVERED UNREACHABLE alternativeonustate=${alternativeonustates}
TorstenThieme440b7c02020-12-18 15:42:57 +0000476 Power On ONU Device ${namespace}
477 Current State Test All Onus ${state2test}
TorstenThieme5ca1dd12020-10-16 08:42:16 +0000478
TorstenThieme1fbe8082020-10-21 13:27:59 +0000479Do Soft Reboot Onu Device
480 [Documentation] This keyword reboots softly all onus and checks the states.
TorstenThiemef78a9d82021-03-05 13:42:09 +0000481 ${device_list}= Set Variable ${EMPTY}
TorstenThiemefd7e7ba2020-11-06 13:57:57 +0000482 FOR ${I} IN RANGE 0 ${num_all_onus}
TorstenThieme1fbe8082020-10-21 13:27:59 +0000483 ${src}= Set Variable ${hosts.src[${I}]}
484 ${onu_device_id}= Get Device ID From SN ${src['onu']}
TorstenThiemef78a9d82021-03-05 13:42:09 +0000485 ${device_list}= Catenate ${device_list} ${onu_device_id}
TorstenThieme1fbe8082020-10-21 13:27:59 +0000486 END
TorstenThiemef78a9d82021-03-05 13:42:09 +0000487 Reboot ONU ${device_list} False
TorstenThieme6cc43762021-03-03 10:20:16 +0000488 ${alternativeonustates}= Create List stopping-openomci
489 Current State Test All Onus omci-flows-deleted
Matteo Scandoloc14525a2021-02-02 08:34:43 -0800490 ... ENABLED DISCOVERED UNREACHABLE alternativeonustate=${alternativeonustates}
TorstenThieme73850052020-12-10 12:43:28 +0000491 Sleep 5s
TorstenThieme6cc43762021-03-03 10:20:16 +0000492 Current State Test All Onus omci-flows-pushed
TorstenThiemed4f48962020-12-08 12:17:19 +0000493 Do Onu Port Check