Joey Armstrong | 888f1ee | 2023-01-11 17:14:30 -0500 | [diff] [blame] | 1 | # Copyright 2017-2023 Open Networking Foundation (ONF) and the ONF Contributors |
Kailash | 9276492 | 2019-07-25 08:21:39 -0700 | [diff] [blame] | 2 | # |
| 3 | # Licensed under the Apache License, Version 2.0 (the "License"); |
| 4 | # you may not use this file except in compliance with the License. |
| 5 | # You may obtain a copy of the License at |
| 6 | # |
| 7 | # http://www.apache.org/licenses/LICENSE-2.0 |
| 8 | # |
| 9 | # Unless required by applicable law or agreed to in writing, software |
| 10 | # distributed under the License is distributed on an "AS IS" BASIS, |
| 11 | # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| 12 | # See the License for the specific language governing permissions and |
| 13 | # limitations under the License. |
Kailash | 9276492 | 2019-07-25 08:21:39 -0700 | [diff] [blame] | 14 | # robot test functions |
| 15 | |
| 16 | *** Settings *** |
| 17 | Documentation Library for various utilities |
| 18 | Library SSHLibrary |
Kailash | 9276492 | 2019-07-25 08:21:39 -0700 | [diff] [blame] | 19 | Library String |
| 20 | Library DateTime |
| 21 | Library Process |
| 22 | Library Collections |
| 23 | Library RequestsLibrary |
| 24 | Library OperatingSystem |
Andy Bavier | 63460da | 2020-02-20 14:35:12 -0700 | [diff] [blame] | 25 | Library CORDRobot |
| 26 | Library ImportResource resources=CORDRobot |
TorstenThieme | d4f4896 | 2020-12-08 12:17:19 +0000 | [diff] [blame] | 27 | Resource ./voltctl.robot |
LupoAndreaSperanza | 0f3fbc2 | 2023-05-16 21:02:40 +0200 | [diff] [blame] | 28 | Resource ./bbsim.robot |
Kailash | 9276492 | 2019-07-25 08:21:39 -0700 | [diff] [blame] | 29 | |
| 30 | *** Keywords *** |
Kailash | 528f7c0 | 2019-07-31 10:55:49 -0700 | [diff] [blame] | 31 | Check CLI Tools Configured |
| 32 | [Documentation] Tests that use 'voltctl' and 'kubectl' should execute this keyword in suite setup |
| 33 | # check voltctl and kubectl configured |
Matteo Scandolo | 1eacdd8 | 2021-06-28 10:32:19 +0200 | [diff] [blame] | 34 | ${voltctl_rc} ${voltctl_output}= Run And Return Rc And Output voltctl -c ${VOLTCTL_CONFIG} device list |
Hardik Windlass | 1380317 | 2021-04-26 08:17:07 +0000 | [diff] [blame] | 35 | Log ${voltctl_output} |
| 36 | ${kubectl_rc} ${kubectl_output}= Run And Return Rc And Output kubectl get pods |
| 37 | Log ${kubectl_output} |
Gilles Depatie | 675a206 | 2019-10-22 12:44:42 -0400 | [diff] [blame] | 38 | Run Keyword If ${voltctl_rc} != 0 or ${kubectl_rc} != 0 FATAL ERROR |
| 39 | ... VOLTCTL and KUBECTL not configured. Please configure before executing tests. |
Gilles Depatie | b5682f8 | 2019-10-31 10:39:45 -0400 | [diff] [blame] | 40 | |
| 41 | Send File To Onos |
Zack Williams | a8fe75a | 2020-01-10 14:25:27 -0700 | [diff] [blame] | 42 | [Documentation] Send the content of the file to Onos to selected section of configuration |
| 43 | ... using Post Request |
Huseyin Ahmet AYDIN | 42d3b71 | 2021-06-10 14:46:17 +0000 | [diff] [blame] | 44 | [Arguments] ${CONFIG_FILE} ${section}=${EMPTY} |
Zack Williams | a8fe75a | 2020-01-10 14:25:27 -0700 | [diff] [blame] | 45 | ${Headers}= Create Dictionary Content-Type application/json |
| 46 | ${File_Data}= OperatingSystem.Get File ${CONFIG_FILE} |
| 47 | Log ${Headers} |
| 48 | Log ${File_Data} |
| 49 | ${resp}= Post Request ONOS |
| 50 | ... /onos/v1/network/configuration/${section} headers=${Headers} data=${File_Data} |
Cristina de Francisco | c4cfd7e | 2023-10-09 10:55:08 +0200 | [diff] [blame^] | 51 | Should Be Equal As Strings ${resp.status_code} 200 Error sending file to ONOS (${resp.status_code}) |
Andy Bavier | 88cd9f6 | 2019-11-26 16:22:33 -0700 | [diff] [blame] | 52 | |
| 53 | Common Test Suite Setup |
| 54 | [Documentation] Setup the test suite |
Cristina de Francisco | c4cfd7e | 2023-10-09 10:55:08 +0200 | [diff] [blame^] | 55 | Set Global Variable ${KUBECTL_CONFIG} %{KUBECONFIG} |
Matteo Scandolo | 5899be1 | 2020-11-11 15:38:07 -0800 | [diff] [blame] | 56 | Set Global Variable ${VOLTCTL_CONFIG} %{VOLTCONFIG} |
Andy Bavier | 88cd9f6 | 2019-11-26 16:22:33 -0700 | [diff] [blame] | 57 | ${k8s_node_ip}= Evaluate ${nodes}[0].get("ip") |
ubuntu | 6b6e7d4 | 2020-03-02 12:35:42 -0800 | [diff] [blame] | 58 | ${ONOS_REST_IP}= Get Environment Variable ONOS_REST_IP ${k8s_node_ip} |
| 59 | ${ONOS_SSH_IP}= Get Environment Variable ONOS_SSH_IP ${k8s_node_ip} |
| 60 | Set Global Variable ${ONOS_REST_IP} |
| 61 | Set Global Variable ${ONOS_SSH_IP} |
Andy Bavier | 88cd9f6 | 2019-11-26 16:22:33 -0700 | [diff] [blame] | 62 | ${k8s_node_user}= Evaluate ${nodes}[0].get("user") |
| 63 | ${k8s_node_pass}= Evaluate ${nodes}[0].get("pass") |
| 64 | Check CLI Tools Configured |
| 65 | ${onos_auth}= Create List karaf karaf |
| 66 | ${HEADERS} Create Dictionary Content-Type=application/json |
ubuntu | 6b6e7d4 | 2020-03-02 12:35:42 -0800 | [diff] [blame] | 67 | Create Session ONOS http://${ONOS_REST_IP}:${ONOS_REST_PORT} auth=${ONOS_AUTH} |
Suchitra Vemuri | a6879aa | 2020-11-03 11:03:11 -0800 | [diff] [blame] | 68 | ${num_olts} Get Length ${olts} |
| 69 | ${list_olts} Create List |
Suchitra Vemuri | ac9785e | 2021-01-07 16:50:18 -0800 | [diff] [blame] | 70 | # Create olt list from the configuration file |
Suchitra Vemuri | a6879aa | 2020-11-03 11:03:11 -0800 | [diff] [blame] | 71 | FOR ${I} IN RANGE 0 ${num_olts} |
| 72 | ${ip} Evaluate ${olts}[${I}].get("ip") |
| 73 | ${user} Evaluate ${olts}[${I}].get("user") |
| 74 | ${pass} Evaluate ${olts}[${I}].get("pass") |
| 75 | ${serial_number} Evaluate ${olts}[${I}].get("serial") |
| 76 | ${olt_ssh_ip} Evaluate ${olts}[${I}].get("sship") |
Andrea Campanella | 3dcce27 | 2021-01-15 16:04:47 +0100 | [diff] [blame] | 77 | ${type} Evaluate ${olts}[${I}].get("type") |
Hardik Windlass | c4d1fd6 | 2022-04-12 13:12:28 +0000 | [diff] [blame] | 78 | ${power_switch_port} Evaluate ${olts}[${I}].get("power_switch_port") |
Suchitra Vemuri | 09f878d | 2021-02-10 18:19:04 -0800 | [diff] [blame] | 79 | ${orig_olt_port} Evaluate ${olts}[${I}].get("oltPort") |
| 80 | ${port}= Set Variable If "${orig_olt_port}" == "None" ${OLT_PORT} ${orig_olt_port} |
Suchitra Vemuri | a6879aa | 2020-11-03 11:03:11 -0800 | [diff] [blame] | 81 | ${onu_count}= Get ONU Count For OLT ${hosts.src} ${serial_number} |
Suchitra Vemuri | fe30941 | 2020-12-01 19:19:52 -0800 | [diff] [blame] | 82 | ${onu_list}= Get ONU List For OLT ${hosts.src} ${serial_number} |
Suchitra Vemuri | a6879aa | 2020-11-03 11:03:11 -0800 | [diff] [blame] | 83 | ${olt} Create Dictionary ip ${ip} user ${user} pass |
Andrea Campanella | 3dcce27 | 2021-01-15 16:04:47 +0100 | [diff] [blame] | 84 | ... ${pass} sn ${serial_number} onucount ${onu_count} type ${type} |
Hardik Windlass | c4d1fd6 | 2022-04-12 13:12:28 +0000 | [diff] [blame] | 85 | ... sship ${olt_ssh_ip} oltport ${port} powerswitchport ${power_switch_port} |
| 86 | ... onus ${onu_list} |
Suchitra Vemuri | a6879aa | 2020-11-03 11:03:11 -0800 | [diff] [blame] | 87 | Append To List ${list_olts} ${olt} |
| 88 | END |
| 89 | ${num_all_onus}= Get Length ${hosts.src} |
| 90 | ${num_all_onus}= Convert to String ${num_all_onus} |
Andy Bavier | 88cd9f6 | 2019-11-26 16:22:33 -0700 | [diff] [blame] | 91 | #send sadis file to onos |
Andy Bavier | a269175 | 2019-11-27 12:18:38 -0700 | [diff] [blame] | 92 | ${sadis_file}= Get Variable Value ${sadis.file} |
Zack Williams | a8fe75a | 2020-01-10 14:25:27 -0700 | [diff] [blame] | 93 | Log To Console \nSadis File:${sadis_file} |
Cristina de Francisco | c4cfd7e | 2023-10-09 10:55:08 +0200 | [diff] [blame^] | 94 | Run Keyword Unless '${sadis_file}' == '${None}' Send File To Onos ${sadis_file} apps/ |
Suchitra Vemuri | a6879aa | 2020-11-03 11:03:11 -0800 | [diff] [blame] | 95 | Set Suite Variable ${num_all_onus} |
| 96 | Set Suite Variable ${num_olts} |
| 97 | Set Suite Variable ${list_olts} |
| 98 | ${olt_count}= Get Length ${list_olts} |
| 99 | Set Suite Variable ${olt_count} |
Andrea Campanella | 3dcce27 | 2021-01-15 16:04:47 +0100 | [diff] [blame] | 100 | @{container_list}= Create List ${OLT_ADAPTER_APP_LABEL} adapter-open-onu voltha-api-server |
Andy Bavier | 88cd9f6 | 2019-11-26 16:22:33 -0700 | [diff] [blame] | 101 | ... voltha-ro-core voltha-rw-core-11 voltha-rw-core-12 voltha-ofagent |
| 102 | Set Suite Variable ${container_list} |
| 103 | ${datetime}= Get Current Date |
suraj gour | 7f6d5fe | 2019-11-29 10:56:35 +0000 | [diff] [blame] | 104 | Set Suite Variable ${datetime} |
| 105 | |
Suchitra Vemuri | a6879aa | 2020-11-03 11:03:11 -0800 | [diff] [blame] | 106 | Get ONU Count For OLT |
| 107 | [Arguments] ${src} ${serial_number} |
| 108 | [Documentation] Gets ONU Count for the specified OLT |
| 109 | ${src_length}= Get Length ${src} |
| 110 | ${count}= Set Variable 0 |
| 111 | FOR ${I} IN RANGE 0 ${src_length} |
| 112 | ${sn} Evaluate ${src}[${I}].get("olt") |
TorstenThieme | d4f4896 | 2020-12-08 12:17:19 +0000 | [diff] [blame] | 113 | ${count}= Run Keyword If '${serial_number}' == '${sn}' Evaluate ${count} + 1 |
| 114 | ... ELSE Set Variable ${count} |
Suchitra Vemuri | a6879aa | 2020-11-03 11:03:11 -0800 | [diff] [blame] | 115 | END |
| 116 | [Return] ${count} |
| 117 | |
Suchitra Vemuri | fe30941 | 2020-12-01 19:19:52 -0800 | [diff] [blame] | 118 | Get ONU List For OLT |
| 119 | [Arguments] ${src} ${serial_number} |
| 120 | [Documentation] Gets ONU List for the specified OLT |
| 121 | ${src_length}= Get Length ${src} |
| 122 | ${onu_list}= Create List |
| 123 | FOR ${I} IN RANGE 0 ${src_length} |
| 124 | ${sn} Evaluate ${src}[${I}].get("olt") |
Matteo Scandolo | 243288d | 2021-09-20 14:48:58 -0700 | [diff] [blame] | 125 | Run Keyword If '${serial_number}' == '${sn}' Append To List ${onu_list} ${src}[${I}][onu] |
Suchitra Vemuri | fe30941 | 2020-12-01 19:19:52 -0800 | [diff] [blame] | 126 | ... ELSE Set Variable ${onu_list} |
| 127 | END |
| 128 | [Return] ${onu_list} |
| 129 | |
suraj gour | 7f6d5fe | 2019-11-29 10:56:35 +0000 | [diff] [blame] | 130 | WPA Reassociate |
suraj gour | 7f6d5fe | 2019-11-29 10:56:35 +0000 | [diff] [blame] | 131 | [Documentation] Executes a particular wpa_cli reassociate, which performs force reassociation |
Zack Williams | a8fe75a | 2020-01-10 14:25:27 -0700 | [diff] [blame] | 132 | [Arguments] ${iface} ${ip} ${user} ${pass}=${None} |
| 133 | ... ${container_type}=${None} ${container_name}=${None} |
suraj gour | 7f6d5fe | 2019-11-29 10:56:35 +0000 | [diff] [blame] | 134 | #Below for loops are used instead of sleep time, to execute reassociate command and check status |
Zack Williams | a8fe75a | 2020-01-10 14:25:27 -0700 | [diff] [blame] | 135 | FOR ${i} IN RANGE 70 |
| 136 | ${output}= Login And Run Command On Remote System |
| 137 | ... wpa_cli -i ${iface} reassociate ${ip} ${user} |
| 138 | ... ${pass} ${container_type} ${container_name} |
| 139 | ${passed}= Run Keyword And Return Status Should Contain ${output} OK |
Andy Bavier | b63f6d2 | 2020-03-12 15:34:37 -0700 | [diff] [blame] | 140 | Exit For Loop If ${passed} |
Zack Williams | a8fe75a | 2020-01-10 14:25:27 -0700 | [diff] [blame] | 141 | END |
Andy Bavier | b63f6d2 | 2020-03-12 15:34:37 -0700 | [diff] [blame] | 142 | Should Be True ${passed} Status does not contain 'SUCCESS' |
Zack Williams | a8fe75a | 2020-01-10 14:25:27 -0700 | [diff] [blame] | 143 | FOR ${i} IN RANGE 70 |
| 144 | ${output}= Login And Run Command On Remote System |
Andy Bavier | ae4a17e | 2020-02-25 14:54:36 -0700 | [diff] [blame] | 145 | ... wpa_cli -i ${iface} status | grep SUCCESS ${ip} ${user} |
Zack Williams | a8fe75a | 2020-01-10 14:25:27 -0700 | [diff] [blame] | 146 | ... ${pass} ${container_type} ${container_name} |
| 147 | ${passed}= Run Keyword And Return Status Should Contain ${output} SUCCESS |
Andy Bavier | b63f6d2 | 2020-03-12 15:34:37 -0700 | [diff] [blame] | 148 | Exit For Loop If ${passed} |
Zack Williams | a8fe75a | 2020-01-10 14:25:27 -0700 | [diff] [blame] | 149 | END |
Andy Bavier | b63f6d2 | 2020-03-12 15:34:37 -0700 | [diff] [blame] | 150 | Should Be True ${passed} Status does not contain 'SUCCESS' |
Zack Williams | a8fe75a | 2020-01-10 14:25:27 -0700 | [diff] [blame] | 151 | |
suraj gour | 7f6d5fe | 2019-11-29 10:56:35 +0000 | [diff] [blame] | 152 | Validate Authentication After Reassociate |
Zack Williams | a8fe75a | 2020-01-10 14:25:27 -0700 | [diff] [blame] | 153 | [Arguments] ${auth_pass} ${iface} ${ip} ${user} ${pass}=${None} |
| 154 | ... ${container_type}=${None} ${container_name}=${None} |
| 155 | [Documentation] |
| 156 | ... Executes a particular reassociate request on the RG using wpa_cli. |
| 157 | ... auth_pass determines if authentication should pass |
Andy Bavier | 84834d4 | 2020-02-25 13:49:50 -0700 | [diff] [blame] | 158 | ${wpa_log}= Catenate SEPARATOR=. /tmp/wpa ${iface} log |
| 159 | ${output}= Login And Run Command On Remote System truncate -s 0 ${wpa_log}; cat ${wpa_log} |
| 160 | ... ${ip} ${user} ${pass} ${container_type} ${container_name} |
| 161 | Log ${output} |
| 162 | Should Not Contain ${output} authentication completed successfully |
suraj gour | 7f6d5fe | 2019-11-29 10:56:35 +0000 | [diff] [blame] | 163 | WPA Reassociate ${iface} ${ip} ${user} ${pass} ${container_type} ${container_name} |
Zack Williams | a8fe75a | 2020-01-10 14:25:27 -0700 | [diff] [blame] | 164 | Run Keyword If '${auth_pass}' == 'True' Wait Until Keyword Succeeds ${timeout} 2s |
Andy Bavier | 84834d4 | 2020-02-25 13:49:50 -0700 | [diff] [blame] | 165 | ... Check Remote File Contents True ${wpa_log} ${iface}.*authentication completed successfully |
Zack Williams | a8fe75a | 2020-01-10 14:25:27 -0700 | [diff] [blame] | 166 | ... ${ip} ${user} ${pass} ${container_type} ${container_name} |
suraj gour | 7f6d5fe | 2019-11-29 10:56:35 +0000 | [diff] [blame] | 167 | Run Keyword If '${auth_pass}' == 'False' Sleep 20s |
Suchitra Vemuri | 3cb29f8 | 2020-02-25 13:59:58 -0800 | [diff] [blame] | 168 | Run Keyword If '${auth_pass}' == 'False' Check Remote File Contents False /tmp/wpa.log |
Andy Bavier | 84834d4 | 2020-02-25 13:49:50 -0700 | [diff] [blame] | 169 | ... ${iface}.*authentication completed successfully ${ip} ${user} ${pass} |
Zack Williams | a8fe75a | 2020-01-10 14:25:27 -0700 | [diff] [blame] | 170 | ... ${container_type} ${container_name} |
suraj gour | d5cfdbb | 2019-12-13 12:44:55 +0000 | [diff] [blame] | 171 | |
| 172 | Send Dhclient Request To Release Assigned IP |
Zack Williams | a8fe75a | 2020-01-10 14:25:27 -0700 | [diff] [blame] | 173 | [Arguments] ${iface} ${ip} ${user} ${path_dhcpleasefile} ${pass}=${None} |
| 174 | ... ${container_type}=${None} ${container_name}=${None} |
suraj gour | d5cfdbb | 2019-12-13 12:44:55 +0000 | [diff] [blame] | 175 | [Documentation] Executes a dhclient with option to release ip against a particular interface on the RG (src) |
Zack Williams | a8fe75a | 2020-01-10 14:25:27 -0700 | [diff] [blame] | 176 | ${result}= Login And Run Command On Remote System |
| 177 | ... dhclient -nw -r ${iface} && rm ${path_dhcpleasefile}/dhclient.* ${ip} ${user} |
suraj gour | d5cfdbb | 2019-12-13 12:44:55 +0000 | [diff] [blame] | 178 | ... ${pass} ${container_type} ${container_name} |
| 179 | Log ${result} |
| 180 | #Should Contain ${result} DHCPRELEASE |
| 181 | [Return] ${result} |
suraj gour | 1ecfae9 | 2019-12-20 15:11:40 +0000 | [diff] [blame] | 182 | |
| 183 | Check Remote File Contents For WPA Logs |
Zack Williams | a8fe75a | 2020-01-10 14:25:27 -0700 | [diff] [blame] | 184 | [Arguments] ${file_should_exist} ${file} ${pattern} ${ip} ${user} ${pass}=${None} |
| 185 | ... ${container_type}=${None} ${container_name}=${None} ${prompt}=~$ |
suraj gour | 1ecfae9 | 2019-12-20 15:11:40 +0000 | [diff] [blame] | 186 | [Documentation] Checks for particular pattern count in a file |
Zack Williams | a8fe75a | 2020-01-10 14:25:27 -0700 | [diff] [blame] | 187 | ${result}= Login And Run Command On Remote System |
| 188 | ... cat ${file} | grep '${pattern}' | wc -l ${ip} ${user} ${pass} |
suraj gour | 1ecfae9 | 2019-12-20 15:11:40 +0000 | [diff] [blame] | 189 | ... ${container_type} ${container_name} ${prompt} |
| 190 | [Return] ${result} |
Gayathri.Selvan | ee4a91b | 2020-01-17 06:49:53 +0000 | [diff] [blame] | 191 | |
| 192 | Perform Sanity Test |
Suchitra Vemuri | a6879aa | 2020-11-03 11:03:11 -0800 | [diff] [blame] | 193 | [Documentation] This keyword iterate all OLTs and performs Sanity Test Procedure |
| 194 | ... for all the ONUs connected to each OLT - ATT workflow |
TorstenThieme | c3c2323 | 2021-01-13 13:06:31 +0000 | [diff] [blame] | 195 | ... For repeating sanity test without subscriber changes set flag supress_add_subscriber=True. |
| 196 | ... In all other (common) cases flag has to be set False (default). |
| 197 | [Arguments] ${supress_add_subscriber}=False |
Suchitra Vemuri | a6879aa | 2020-11-03 11:03:11 -0800 | [diff] [blame] | 198 | FOR ${J} IN RANGE 0 ${num_olts} |
| 199 | ${olt_serial_number}= Set Variable ${list_olts}[${J}][sn] |
| 200 | ${onu_count}= Set Variable ${list_olts}[${J}][onucount] |
| 201 | ${of_id}= Wait Until Keyword Succeeds ${timeout} 15s Validate OLT Device in ONOS |
| 202 | ... ${olt_serial_number} |
| 203 | Set Global Variable ${of_id} |
TorstenThieme | dda3765 | 2021-11-11 16:22:05 +0000 | [diff] [blame] | 204 | ${nni_port}= Wait Until Keyword Succeeds ${timeout} 2s Get NNI Port in ONOS ${of_id} |
Suchitra Vemuri | a6879aa | 2020-11-03 11:03:11 -0800 | [diff] [blame] | 205 | Perform Sanity Test Per OLT ${of_id} ${nni_port} ${olt_serial_number} ${onu_count} |
TorstenThieme | c3c2323 | 2021-01-13 13:06:31 +0000 | [diff] [blame] | 206 | ... ${supress_add_subscriber} |
Suchitra Vemuri | a6879aa | 2020-11-03 11:03:11 -0800 | [diff] [blame] | 207 | END |
| 208 | |
| 209 | Perform Sanity Test Per OLT |
TorstenThieme | c3c2323 | 2021-01-13 13:06:31 +0000 | [diff] [blame] | 210 | [Arguments] ${of_id} ${nni_port} ${olt_serial_number} ${num_onus} ${supress_add_subscriber}=False |
Gayathri.Selvan | ee4a91b | 2020-01-17 06:49:53 +0000 | [diff] [blame] | 211 | [Documentation] This keyword performs Sanity Test Procedure |
| 212 | ... Sanity test performs authentication, dhcp and pings for all the ONUs given for the POD |
| 213 | ... This keyword can be used to call in any other tests where sanity check is required |
Suchitra Vemuri | a6879aa | 2020-11-03 11:03:11 -0800 | [diff] [blame] | 214 | ... and avoids duplication of code. - ATT workflow |
TorstenThieme | c3c2323 | 2021-01-13 13:06:31 +0000 | [diff] [blame] | 215 | ... For repeating sanity test without subscriber changes set flag supress_add_subscriber=True. |
| 216 | ... In all other (common) cases flag has to be set False (default). |
Suchitra Vemuri | a6879aa | 2020-11-03 11:03:11 -0800 | [diff] [blame] | 217 | FOR ${I} IN RANGE 0 ${num_all_onus} |
Gayathri.Selvan | ee4a91b | 2020-01-17 06:49:53 +0000 | [diff] [blame] | 218 | ${src}= Set Variable ${hosts.src[${I}]} |
| 219 | ${dst}= Set Variable ${hosts.dst[${I}]} |
Suchitra Vemuri | a6879aa | 2020-11-03 11:03:11 -0800 | [diff] [blame] | 220 | Continue For Loop If "${olt_serial_number}"!="${src['olt']}" |
Andrea Speranza | 8b6f46f | 2022-08-23 14:22:15 +0200 | [diff] [blame] | 221 | ${onu_device_id}= Get Device ID From SN ${src['onu']} |
Matteo Scandolo | c2f48fa | 2021-09-29 13:32:55 -0700 | [diff] [blame] | 222 | ${onu_port}= Wait Until Keyword Succeeds ${timeout} 2s |
Hardik Windlass | 1ed2eee | 2021-06-25 09:51:03 +0000 | [diff] [blame] | 223 | ... Get ONU Port in ONOS ${src['onu']} ${of_id} ${src['uni_id']} |
Suchitra Vemuri | 8078b97 | 2020-02-06 19:07:41 -0800 | [diff] [blame] | 224 | # Check ONU port is Enabled in ONOS |
Matteo Scandolo | c2f48fa | 2021-09-29 13:32:55 -0700 | [diff] [blame] | 225 | Wait Until Keyword Succeeds 120s 2s |
Hardik Windlass | 3901567 | 2021-07-05 05:48:08 +0000 | [diff] [blame] | 226 | ... Verify UNI Port Is Enabled ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${src['onu']} ${src['uni_id']} |
Matteo Scandolo | ebf2be4 | 2021-09-22 09:46:50 -0700 | [diff] [blame] | 227 | # Verify Default Meter in ONOS (valid only for ATT and only if subscriber is not provisioned) |
| 228 | Run Keyword Unless ${supress_add_subscriber} |
| 229 | ... Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s |
Matteo Scandolo | 243288d | 2021-09-20 14:48:58 -0700 | [diff] [blame] | 230 | ... Verify Default Meter Present in ONOS ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${of_id} |
Matteo Scandolo | 7e519fb | 2021-08-13 11:35:16 -0700 | [diff] [blame] | 231 | # Verify default EAPOL flows are added for the ONU port |
TorstenThieme | c3c2323 | 2021-01-13 13:06:31 +0000 | [diff] [blame] | 232 | Run Keyword Unless ${supress_add_subscriber} |
| 233 | ... Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s |
Matteo Scandolo | 7e519fb | 2021-08-13 11:35:16 -0700 | [diff] [blame] | 234 | ... Verify Eapol Flows Added For ONU ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${of_id} ${onu_port} |
Matteo Scandolo | 7bdbe2d | 2021-11-29 15:48:25 -0800 | [diff] [blame] | 235 | # Verify LLDP flow in ONOS |
Matteo Scandolo | 6a90bda | 2021-11-30 11:31:38 -0800 | [diff] [blame] | 236 | Wait Until Keyword Succeeds ${timeout} 5s |
Matteo Scandolo | 7bdbe2d | 2021-11-29 15:48:25 -0800 | [diff] [blame] | 237 | ... Verify LLDP Flow Added ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${of_id} 1 |
Suchitra Vemuri | 8078b97 | 2020-02-06 19:07:41 -0800 | [diff] [blame] | 238 | # Verify ONU state in voltha |
Hardik Windlass | 58b23a3 | 2022-05-10 11:06:48 +0530 | [diff] [blame] | 239 | Wait Until Keyword Succeeds ${timeout} 5s Validate Device |
Suchitra Vemuri | 8078b97 | 2020-02-06 19:07:41 -0800 | [diff] [blame] | 240 | ... ENABLED ACTIVE REACHABLE |
| 241 | ... ${src['onu']} onu=True onu_reason=omci-flows-pushed |
| 242 | # Perform Authentication |
Andy Bavier | 84834d4 | 2020-02-25 13:49:50 -0700 | [diff] [blame] | 243 | ${wpa_log}= Run Keyword If ${has_dataplane} Catenate SEPARATOR=. |
| 244 | ... /tmp/wpa ${src['dp_iface_name']} log |
Matteo Scandolo | c2f48fa | 2021-09-29 13:32:55 -0700 | [diff] [blame] | 245 | Run Keyword If ${has_dataplane} Validate Authentication True |
Gayathri.Selvan | ee4a91b | 2020-01-17 06:49:53 +0000 | [diff] [blame] | 246 | ... ${src['dp_iface_name']} wpa_supplicant.conf ${src['ip']} ${src['user']} ${src['pass']} |
Andy Bavier | 84834d4 | 2020-02-25 13:49:50 -0700 | [diff] [blame] | 247 | ... ${src['container_type']} ${src['container_name']} ${wpa_log} |
Matteo Scandolo | c2f48fa | 2021-09-29 13:32:55 -0700 | [diff] [blame] | 248 | Wait Until Keyword Succeeds ${timeout} 2 |
ubuntu | 6b6e7d4 | 2020-03-02 12:35:42 -0800 | [diff] [blame] | 249 | ... Verify ONU in AAA-Users ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${onu_port} |
TorstenThieme | c3c2323 | 2021-01-13 13:06:31 +0000 | [diff] [blame] | 250 | Run Keyword Unless ${supress_add_subscriber} |
TorstenThieme | 4e2168e | 2021-06-22 14:01:47 +0000 | [diff] [blame] | 251 | ... Execute ONOS CLI Command use single connection ${ONOS_SSH_IP} ${ONOS_SSH_PORT} |
Gayathri.Selvan | ee4a91b | 2020-01-17 06:49:53 +0000 | [diff] [blame] | 252 | ... volt-add-subscriber-access ${of_id} ${onu_port} |
Suchitra Vemuri | 9da4430 | 2020-03-04 14:24:49 -0800 | [diff] [blame] | 253 | # Verify that no pending flows exist for the ONU port |
Matteo Scandolo | c2f48fa | 2021-09-29 13:32:55 -0700 | [diff] [blame] | 254 | Wait Until Keyword Succeeds ${timeout} 2s |
Suchitra Vemuri | 9da4430 | 2020-03-04 14:24:49 -0800 | [diff] [blame] | 255 | ... Verify No Pending Flows For ONU ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${onu_port} |
Hardik Windlass | 2180763 | 2020-04-14 16:24:55 +0530 | [diff] [blame] | 256 | # Verify subscriber access flows are added for the ONU port |
Matteo Scandolo | c2f48fa | 2021-09-29 13:32:55 -0700 | [diff] [blame] | 257 | Wait Until Keyword Succeeds ${timeout} 5s |
Hardik Windlass | 2180763 | 2020-04-14 16:24:55 +0530 | [diff] [blame] | 258 | ... Verify Subscriber Access Flows Added For ONU ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${of_id} |
| 259 | ... ${onu_port} ${nni_port} ${src['c_tag']} ${src['s_tag']} |
Matteo Scandolo | 7e519fb | 2021-08-13 11:35:16 -0700 | [diff] [blame] | 260 | # Verify subscriber EAPOL flow is installed |
Matteo Scandolo | c2f48fa | 2021-09-29 13:32:55 -0700 | [diff] [blame] | 261 | Wait Until Keyword Succeeds ${timeout} 5s |
Matteo Scandolo | 7e519fb | 2021-08-13 11:35:16 -0700 | [diff] [blame] | 262 | ... Verify Eapol Flows Added For ONU ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${of_id} |
| 263 | ... ${onu_port} ${src['c_tag']} |
Hardik Windlass | 2a9b159 | 2020-07-23 18:28:13 +0530 | [diff] [blame] | 264 | # Verify Meters in ONOS |
Hardik Windlass | 58b23a3 | 2022-05-10 11:06:48 +0530 | [diff] [blame] | 265 | Wait Until Keyword Succeeds ${timeout} 5s |
Hardik Windlass | 2a9b159 | 2020-07-23 18:28:13 +0530 | [diff] [blame] | 266 | ... Verify Meters in ONOS ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${of_id} ${onu_port} |
Matteo Scandolo | c2f48fa | 2021-09-29 13:32:55 -0700 | [diff] [blame] | 267 | Run Keyword If ${has_dataplane} Validate DHCP and Ping True |
Gayathri.Selvan | ee4a91b | 2020-01-17 06:49:53 +0000 | [diff] [blame] | 268 | ... True ${src['dp_iface_name']} ${src['s_tag']} ${src['c_tag']} ${dst['dp_iface_ip_qinq']} |
| 269 | ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']} |
| 270 | ... ${dst['dp_iface_name']} ${dst['ip']} ${dst['user']} ${dst['pass']} ${dst['container_type']} |
| 271 | ... ${dst['container_name']} |
Matteo Scandolo | c2f48fa | 2021-09-29 13:32:55 -0700 | [diff] [blame] | 272 | Wait Until Keyword Succeeds ${timeout} 2s |
ubuntu | 6b6e7d4 | 2020-03-02 12:35:42 -0800 | [diff] [blame] | 273 | ... Validate Subscriber DHCP Allocation ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${onu_port} |
Gayathri.Selvan | ee4a91b | 2020-01-17 06:49:53 +0000 | [diff] [blame] | 274 | END |
| 275 | |
Hardik Windlass | a3d04b9 | 2020-02-17 15:06:05 +0000 | [diff] [blame] | 276 | Perform Sanity Test DT |
Suchitra Vemuri | a6879aa | 2020-11-03 11:03:11 -0800 | [diff] [blame] | 277 | [Documentation] This keyword iterate all OLTs and performs Sanity Test Procedure for DT workflow |
TorstenThieme | c3c2323 | 2021-01-13 13:06:31 +0000 | [diff] [blame] | 278 | ... For repeating sanity test without subscriber changes set flag supress_add_subscriber=True. |
| 279 | ... In all other (common) cases flag has to be set False (default). |
| 280 | [Arguments] ${supress_add_subscriber}=False |
Suchitra Vemuri | a6879aa | 2020-11-03 11:03:11 -0800 | [diff] [blame] | 281 | FOR ${J} IN RANGE 0 ${num_olts} |
| 282 | ${olt_serial_number}= Set Variable ${list_olts}[${J}][sn] |
| 283 | ${num_onus}= Set Variable ${list_olts}[${J}][onucount] |
| 284 | ${olt_device_id}= Get OLTDeviceID From OLT List ${olt_serial_number} |
| 285 | ${of_id}= Wait Until Keyword Succeeds ${timeout} 15s Validate OLT Device in ONOS |
| 286 | ... ${olt_serial_number} |
| 287 | Set Global Variable ${of_id} |
TorstenThieme | dda3765 | 2021-11-11 16:22:05 +0000 | [diff] [blame] | 288 | ${nni_port}= Wait Until Keyword Succeeds ${timeout} 2s Get NNI Port in ONOS ${of_id} |
Suchitra Vemuri | a6879aa | 2020-11-03 11:03:11 -0800 | [diff] [blame] | 289 | Perform Sanity Test DT Per OLT ${of_id} ${nni_port} ${olt_serial_number} ${num_onus} |
TorstenThieme | c3c2323 | 2021-01-13 13:06:31 +0000 | [diff] [blame] | 290 | ... ${supress_add_subscriber} |
Suchitra Vemuri | a6879aa | 2020-11-03 11:03:11 -0800 | [diff] [blame] | 291 | # Verify ONOS Flows |
| 292 | # Number of Access Flows on ONOS equals 4 * the Number of Active ONUs (2 for each downstream and upstream) |
| 293 | ${onos_flows_count}= Evaluate 4 * ${num_onus} |
| 294 | Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s |
| 295 | ... Verify Subscriber Access Flows Added Count DT ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${of_id} |
| 296 | ... ${onos_flows_count} |
Matteo Scandolo | 7bdbe2d | 2021-11-29 15:48:25 -0800 | [diff] [blame] | 297 | # Verify LLDP flow in ONOS |
Matteo Scandolo | 6a90bda | 2021-11-30 11:31:38 -0800 | [diff] [blame] | 298 | Wait Until Keyword Succeeds ${timeout} 5s |
Matteo Scandolo | 7bdbe2d | 2021-11-29 15:48:25 -0800 | [diff] [blame] | 299 | ... Verify LLDP Flow Added ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${of_id} 1 |
Suchitra Vemuri | a6879aa | 2020-11-03 11:03:11 -0800 | [diff] [blame] | 300 | # Verify VOLTHA Flows |
| 301 | # Number of per OLT Flows equals Twice the Number of Active ONUs (each for downstream and upstream) + 1 for LLDP |
| 302 | ${olt_flows}= Evaluate 2 * ${num_onus} + 1 |
| 303 | # Number of per ONU Flows equals 2 (one each for downstream and upstream) |
| 304 | ${onu_flows}= Set Variable 2 |
Matteo Scandolo | 6a90bda | 2021-11-30 11:31:38 -0800 | [diff] [blame] | 305 | Run Keyword Wait Until Keyword Succeeds ${timeout} 5s Validate OLT Flows |
Hardik Windlass | 5d537ad | 2021-11-16 06:01:54 +0000 | [diff] [blame] | 306 | ... ${olt_flows} ${olt_device_id} |
Suchitra Vemuri | a6879aa | 2020-11-03 11:03:11 -0800 | [diff] [blame] | 307 | ${List_ONU_Serial} Create List |
| 308 | Set Suite Variable ${List_ONU_Serial} |
Suchitra Vemuri | 21a47fd | 2020-11-16 18:39:09 -0800 | [diff] [blame] | 309 | Build ONU SN List ${List_ONU_Serial} ${olt_serial_number} |
Suchitra Vemuri | a6879aa | 2020-11-03 11:03:11 -0800 | [diff] [blame] | 310 | Log ${List_ONU_Serial} |
Hardik Windlass | 5d537ad | 2021-11-16 06:01:54 +0000 | [diff] [blame] | 311 | Wait Until Keyword Succeeds ${timeout} 5s Validate ONU Flows |
Suchitra Vemuri | a6879aa | 2020-11-03 11:03:11 -0800 | [diff] [blame] | 312 | ... ${List_ONU_Serial} ${onu_flows} |
| 313 | END |
| 314 | |
| 315 | |
| 316 | Perform Sanity Test DT Per OLT |
TorstenThieme | c3c2323 | 2021-01-13 13:06:31 +0000 | [diff] [blame] | 317 | [Arguments] ${of_id} ${nni_port} ${olt_serial_number} ${num_onus} ${supress_add_subscriber}=False |
Hardik Windlass | a3d04b9 | 2020-02-17 15:06:05 +0000 | [diff] [blame] | 318 | [Documentation] This keyword performs Sanity Test Procedure for DT Workflow |
| 319 | ... Sanity test performs dhcp and pings (without EAPOL and DHCP flows) for all the ONUs given for the POD |
| 320 | ... This keyword can be used to call in any other tests where sanity check is required |
| 321 | ... and avoids duplication of code. |
TorstenThieme | c3c2323 | 2021-01-13 13:06:31 +0000 | [diff] [blame] | 322 | ... For repeating sanity test without subscriber changes set flag supress_add_subscriber=True. |
| 323 | ... In all other (common) cases flag has to be set False (default). |
Suchitra Vemuri | a6879aa | 2020-11-03 11:03:11 -0800 | [diff] [blame] | 324 | FOR ${I} IN RANGE 0 ${num_all_onus} |
Hardik Windlass | a3d04b9 | 2020-02-17 15:06:05 +0000 | [diff] [blame] | 325 | ${src}= Set Variable ${hosts.src[${I}]} |
| 326 | ${dst}= Set Variable ${hosts.dst[${I}]} |
Suchitra Vemuri | a6879aa | 2020-11-03 11:03:11 -0800 | [diff] [blame] | 327 | Continue For Loop If "${olt_serial_number}"!="${src['olt']}" |
Andrea Speranza | 8b6f46f | 2022-08-23 14:22:15 +0200 | [diff] [blame] | 328 | ${onu_device_id}= Get Device ID From SN ${src['onu']} |
Matteo Scandolo | c2f48fa | 2021-09-29 13:32:55 -0700 | [diff] [blame] | 329 | ${onu_port}= Wait Until Keyword Succeeds ${timeout} 2s |
Emrehan UZUN | abef518 | 2021-11-26 10:54:24 +0000 | [diff] [blame] | 330 | ... Get ONU Port in ONOS ${src['onu']} ${of_id} ${src['uni_id']} |
Hardik Windlass | a3d04b9 | 2020-02-17 15:06:05 +0000 | [diff] [blame] | 331 | # Check ONU port is Enabled in ONOS |
Matteo Scandolo | c2f48fa | 2021-09-29 13:32:55 -0700 | [diff] [blame] | 332 | Wait Until Keyword Succeeds 120s 2s |
Emrehan UZUN | abef518 | 2021-11-26 10:54:24 +0000 | [diff] [blame] | 333 | ... Verify UNI Port Is Enabled ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${src['onu']} ${src['uni_id']} |
TorstenThieme | c3c2323 | 2021-01-13 13:06:31 +0000 | [diff] [blame] | 334 | Run Keyword Unless ${supress_add_subscriber} |
TorstenThieme | 4e2168e | 2021-06-22 14:01:47 +0000 | [diff] [blame] | 335 | ... Execute ONOS CLI Command use single connection ${ONOS_SSH_IP} ${ONOS_SSH_PORT} |
Hardik Windlass | a3d04b9 | 2020-02-17 15:06:05 +0000 | [diff] [blame] | 336 | ... volt-add-subscriber-access ${of_id} ${onu_port} |
Hardik Windlass | fb5eace | 2020-03-26 14:49:01 +0530 | [diff] [blame] | 337 | # Verify subscriber access flows are added for the ONU port |
Matteo Scandolo | c2f48fa | 2021-09-29 13:32:55 -0700 | [diff] [blame] | 338 | Wait Until Keyword Succeeds ${timeout} 5s |
Hardik Windlass | 25e1170 | 2020-03-30 20:05:19 +0530 | [diff] [blame] | 339 | ... Verify Subscriber Access Flows Added For ONU DT ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${of_id} |
| 340 | ... ${onu_port} ${nni_port} ${src['s_tag']} |
TorstenThieme | a36068c | 2021-02-19 09:57:32 +0000 | [diff] [blame] | 341 | # Verify ONU state in voltha |
| 342 | ${onu_reasons}= Create List omci-flows-pushed |
Andrea Campanella | 753510e | 2022-04-28 23:26:27 +0200 | [diff] [blame] | 343 | Run Keyword If ${supress_add_subscriber} Append To List ${onu_reasons} onu-reenabled |
Matteo Scandolo | c2f48fa | 2021-09-29 13:32:55 -0700 | [diff] [blame] | 344 | Wait Until Keyword Succeeds ${timeout} 5s Validate Device |
Hardik Windlass | a3d04b9 | 2020-02-17 15:06:05 +0000 | [diff] [blame] | 345 | ... ENABLED ACTIVE REACHABLE |
TorstenThieme | c3c2323 | 2021-01-13 13:06:31 +0000 | [diff] [blame] | 346 | ... ${src['onu']} onu=True onu_reason=${onu_reasons} |
Hardik Windlass | 2a9b159 | 2020-07-23 18:28:13 +0530 | [diff] [blame] | 347 | # Verify Meters in ONOS |
Hardik Windlass | 5d537ad | 2021-11-16 06:01:54 +0000 | [diff] [blame] | 348 | Wait Until Keyword Succeeds ${timeout} 5s |
Girish Gowdra | 21ec25d | 2021-05-24 10:07:01 -0700 | [diff] [blame] | 349 | ... Verify Meters in ONOS Ietf ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${of_id} ${onu_port} |
Hardik Windlass | fb5eace | 2020-03-26 14:49:01 +0530 | [diff] [blame] | 350 | # TODO: Yet to Verify on the GPON based Physical POD (VOL-2652) |
Matteo Scandolo | c2f48fa | 2021-09-29 13:32:55 -0700 | [diff] [blame] | 351 | Run Keyword If ${has_dataplane} Validate DHCP and Ping True |
Hardik Windlass | a3d04b9 | 2020-02-17 15:06:05 +0000 | [diff] [blame] | 352 | ... True ${src['dp_iface_name']} ${src['s_tag']} ${src['c_tag']} ${dst['dp_iface_ip_qinq']} |
| 353 | ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']} |
| 354 | ... ${dst['dp_iface_name']} ${dst['ip']} ${dst['user']} ${dst['pass']} ${dst['container_type']} |
| 355 | ... ${dst['container_name']} |
Hardik Windlass | a3d04b9 | 2020-02-17 15:06:05 +0000 | [diff] [blame] | 356 | END |
Suchitra Vemuri | a6879aa | 2020-11-03 11:03:11 -0800 | [diff] [blame] | 357 | |
Hardik Windlass | a7b34be | 2022-03-22 17:28:31 +0000 | [diff] [blame] | 358 | Perform Sanity Test DT FTTB |
| 359 | [Documentation] This keyword iterate all OLTs and performs Sanity Test Procedure for DT-FTTB workflow |
| 360 | ... For repeating sanity test without subscriber changes set flag supress_add_subscriber=True. |
| 361 | ... In all other (common) cases flag has to be set False (default). |
| 362 | [Arguments] ${supress_add_subscriber}=False |
| 363 | FOR ${J} IN RANGE 0 ${num_olts} |
| 364 | ${olt_serial_number}= Set Variable ${list_olts}[${J}][sn] |
| 365 | ${olt_device_id}= Get OLTDeviceID From OLT List ${olt_serial_number} |
| 366 | ${of_id}= Wait Until Keyword Succeeds ${timeout} 15s Validate OLT Device in ONOS |
| 367 | ... ${olt_serial_number} |
| 368 | ${nni_port}= Wait Until Keyword Succeeds ${timeout} 2s Get NNI Port in ONOS ${of_id} |
| 369 | Perform Sanity Test DT FTTB Per OLT ${of_id} ${nni_port} ${olt_serial_number} |
| 370 | ... ${supress_add_subscriber} |
| 371 | END |
| 372 | |
| 373 | Perform Sanity Test DT FTTB Per OLT |
| 374 | [Arguments] ${of_id} ${nni_port} ${olt_serial_number} ${supress_add_subscriber}=False |
| 375 | [Documentation] This keyword performs Sanity Test Procedure for DT-FTTB Workflow |
| 376 | ... Sanity test performs dhcp and pings (without EAPOL and DHCP flows) for all the ONUs given for the POD |
| 377 | ... This keyword can be used to call in any other tests where sanity check is required |
| 378 | ... and avoids duplication of code. |
| 379 | ... For repeating sanity test without subscriber changes set flag supress_add_subscriber=True. |
| 380 | ... In all other (common) cases flag has to be set False (default). |
| 381 | FOR ${I} IN RANGE 0 ${num_all_onus} |
| 382 | ${src}= Set Variable ${hosts.src[${I}]} |
| 383 | ${dst}= Set Variable ${hosts.dst[${I}]} |
| 384 | Continue For Loop If "${olt_serial_number}"!="${src['olt']}" |
Andrea Speranza | 8b6f46f | 2022-08-23 14:22:15 +0200 | [diff] [blame] | 385 | ${onu_device_id}= Get Device ID From SN ${src['onu']} |
Hardik Windlass | a7b34be | 2022-03-22 17:28:31 +0000 | [diff] [blame] | 386 | ${onu_port}= Wait Until Keyword Succeeds ${timeout} 2s |
| 387 | ... Get ONU Port in ONOS ${src['onu']} ${of_id} ${src['uni_id']} |
| 388 | # Check ONU port is Enabled in ONOS |
| 389 | Wait Until Keyword Succeeds 120s 2s |
| 390 | ... Verify UNI Port Is Enabled ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${src['onu']} ${src['uni_id']} |
| 391 | Run Keyword Unless ${supress_add_subscriber} |
| 392 | ... Execute ONOS CLI Command use single connection ${ONOS_SSH_IP} ${ONOS_SSH_PORT} |
| 393 | ... volt-add-subscriber-access ${of_id} ${onu_port} |
| 394 | # Verify ONOS flows are added for the ONU port |
| 395 | Wait Until Keyword Succeeds ${timeout} 5s |
| 396 | ... Verify ONOS Flows Added For DT FTTB ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${of_id} |
| 397 | ... ${onu_port} ${nni_port} ${src['service']} |
| 398 | # Verify that the Subscriber is present at the given location |
| 399 | Wait Until Keyword Succeeds ${timeout} 5s |
| 400 | ... Verify Programmed Subscribers DT FTTB ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${of_id} |
| 401 | ... ${onu_port} ${src['service']} |
| 402 | # Verify ONU state in voltha |
| 403 | ${onu_reasons}= Create List omci-flows-pushed |
Andrea Campanella | 753510e | 2022-04-28 23:26:27 +0200 | [diff] [blame] | 404 | Run Keyword If ${supress_add_subscriber} Append To List ${onu_reasons} onu-reenabled |
Hardik Windlass | a7b34be | 2022-03-22 17:28:31 +0000 | [diff] [blame] | 405 | Wait Until Keyword Succeeds ${timeout} 5s Validate Device |
| 406 | ... ENABLED ACTIVE REACHABLE |
| 407 | ... ${src['onu']} onu=True onu_reason=${onu_reasons} |
| 408 | # Verify Meters in ONOS |
| 409 | Wait Until Keyword Succeeds ${timeout} 5s |
| 410 | ... Verify Meters in ONOS Ietf ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${of_id} ${onu_port} |
Hardik Windlass | 256993e | 2022-05-24 09:55:46 +0530 | [diff] [blame] | 411 | ... FTTB_SUBSCRIBER_TRAFFIC |
Hardik Windlass | a7b34be | 2022-03-22 17:28:31 +0000 | [diff] [blame] | 412 | # Verify Mac Learner Mappings |
| 413 | Wait Until Keyword Succeeds ${timeout} 5s Validate Mac Learner Mapping in ONOS |
Hardik Windlass | 256993e | 2022-05-24 09:55:46 +0530 | [diff] [blame] | 414 | ... ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${of_id} ${onu_port} ${src['service'][0]['s_tag']} |
Hardik Windlass | a7b34be | 2022-03-22 17:28:31 +0000 | [diff] [blame] | 415 | Run Keyword If ${has_dataplane} Validate DHCP and Ping True |
| 416 | ... True ${src['dp_iface_name']} ${src['s_tag']} ${src['c_tag']} ${dst['dp_iface_ip_qinq']} |
| 417 | ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']} |
| 418 | ... ${dst['dp_iface_name']} ${dst['ip']} ${dst['user']} ${dst['pass']} ${dst['container_type']} |
| 419 | ... ${dst['container_name']} |
| 420 | END |
| 421 | |
Suchitra Vemuri | a6879aa | 2020-11-03 11:03:11 -0800 | [diff] [blame] | 422 | Validate All OLT Flows |
| 423 | [Documentation] This keyword iterate all OLTs and performs Sanity Test Procedure for DT workflow |
| 424 | FOR ${J} IN RANGE 0 ${num_olts} |
| 425 | ${olt_serial_number}= Set Variable ${list_olts}[${J}][sn] |
| 426 | ${num_onus}= Set Variable ${list_olts}[${J}][onucount] |
| 427 | ${olt_device_id}= Get OLTDeviceID From OLT List ${olt_serial_number} |
| 428 | ${of_id}= Wait Until Keyword Succeeds ${timeout} 15s Validate OLT Device in ONOS |
| 429 | ... ${olt_serial_number} |
| 430 | Set Global Variable ${of_id} |
| 431 | # Verify ONOS Flows |
| 432 | # Number of Access Flows on ONOS equals 4 * the Number of Active ONUs (2 for each downstream and upstream) |
| 433 | ${onos_flows_count}= Evaluate 4 * ${num_onus} |
| 434 | Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s |
| 435 | ... Verify Subscriber Access Flows Added Count DT ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${of_id} |
| 436 | ... ${onos_flows_count} |
| 437 | # Verify VOLTHA Flows |
| 438 | # Number of per OLT Flows equals Twice the Number of Active ONUs (each for downstream and upstream) + 1 for LLDP |
| 439 | ${olt_flows}= Evaluate 2 * ${num_onus} + 1 |
| 440 | # Number of per ONU Flows equals 2 (one each for downstream and upstream) |
| 441 | ${onu_flows}= Set Variable 2 |
| 442 | Run Keyword Wait Until Keyword Succeeds ${timeout} 5s Validate OLT Flows ${olt_flows} |
| 443 | ... ${olt_device_id} |
| 444 | ${List_ONU_Serial} Create List |
| 445 | Set Suite Variable ${List_ONU_Serial} |
Andrea Campanella | 6391f84 | 2020-11-16 10:01:18 +0100 | [diff] [blame] | 446 | Build ONU SN List ${List_ONU_Serial} ${olt_serial_number} |
Suchitra Vemuri | a6879aa | 2020-11-03 11:03:11 -0800 | [diff] [blame] | 447 | Log ${List_ONU_Serial} |
| 448 | Run Keyword Wait Until Keyword Succeeds ${timeout} 5s Validate ONU Flows |
| 449 | ... ${List_ONU_Serial} ${onu_flows} |
| 450 | END |
Hardik Windlass | a3d04b9 | 2020-02-17 15:06:05 +0000 | [diff] [blame] | 451 | |
TorstenThieme | 70bc526 | 2021-01-19 12:12:55 +0000 | [diff] [blame] | 452 | Perform Sanity Tests TT |
| 453 | [Documentation] This keyword performs both Sanity Test Procedure for TT Workflow |
| 454 | ... Sanity Test TT for HSIA, VoD, VoIP services and Sanity Test TT for MCAST |
| 455 | ... For repeating sanity tests without subscriber changes set flag supress_add_subscriber=True. |
| 456 | ... In all other (common) cases flag has to be set False (default). |
| 457 | [Arguments] ${supress_add_subscriber}=False |
| 458 | Perform Sanity Test TT ${supress_add_subscriber} |
TorstenThieme | 136ebf7 | 2021-02-26 14:27:07 +0000 | [diff] [blame] | 459 | # run of mcast sanity test is currently limited for real HW |
| 460 | Run Keyword If ${has_dataplane} Perform Sanity Test TT MCAST ${supress_add_subscriber} |
TorstenThieme | 70bc526 | 2021-01-19 12:12:55 +0000 | [diff] [blame] | 461 | |
Huseyin Ahmet AYDIN | 7cb5ae6 | 2021-10-28 11:07:27 +0000 | [diff] [blame] | 462 | Provision Subscription TT |
| 463 | [Documentation] Provision Subscription TT |
| 464 | [Arguments] ${supress_add_subscriber}=False |
| 465 | FOR ${I} IN RANGE 0 ${num_all_onus} |
| 466 | ${src}= Set Variable ${hosts.src[${I}]} |
| 467 | ${dst}= Set Variable ${hosts.dst[${I}]} |
| 468 | ${service_type}= Get Variable Value ${src['service_type']} "null" |
| 469 | Run Keyword IF '${service_type}' != 'mcast' Provision Subscription for ONU TT ${src} ${dst} |
| 470 | ... ${supress_add_subscriber} |
| 471 | END |
| 472 | |
Suchitra Vemuri | 2f1e07d | 2020-06-26 19:18:01 -0700 | [diff] [blame] | 473 | Perform Sanity Test TT |
| 474 | [Documentation] This keyword performs Sanity Test Procedure for TT Workflow |
| 475 | ... Sanity test performs dhcp and pings (without EAPOL and DHCP flows) for all the ONUs given for the POD |
| 476 | ... This keyword can be used to call in any other tests where sanity check is required |
| 477 | ... and avoids duplication of code. |
TorstenThieme | 70bc526 | 2021-01-19 12:12:55 +0000 | [diff] [blame] | 478 | ... For repeating sanity test without subscriber changes set flag supress_add_subscriber=True. |
| 479 | ... In all other (common) cases flag has to be set False (default). |
Hardik Windlass | c609eb0 | 2022-02-22 11:28:37 +0000 | [diff] [blame] | 480 | [Arguments] ${supress_add_subscriber}=False ${maclearning_enabled}=False |
TorstenThieme | 1e207df | 2022-05-17 10:31:34 +0000 | [diff] [blame] | 481 | @{onu_list}= Create List |
Suchitra Vemuri | a6879aa | 2020-11-03 11:03:11 -0800 | [diff] [blame] | 482 | FOR ${I} IN RANGE 0 ${num_all_onus} |
Suchitra Vemuri | 85cb7d6 | 2020-07-16 23:46:16 -0700 | [diff] [blame] | 483 | ${src}= Set Variable ${hosts.src[${I}]} |
| 484 | ${dst}= Set Variable ${hosts.dst[${I}]} |
| 485 | ${service_type}= Get Variable Value ${src['service_type']} "null" |
TorstenThieme | 1e207df | 2022-05-17 10:31:34 +0000 | [diff] [blame] | 486 | ${sn}= Set Variable ${src['onu']} |
| 487 | # make sure add subscriber will be done only once per onu in case of single tag (not ${unitag_sub}) |
| 488 | ${onu_id}= Get Index From List ${onu_list} ${sn} |
| 489 | ${supression_flag} Set Variable If not ${unitag_sub} and -1 != ${onu_id} True ${supress_add_subscriber} |
| 490 | Append To List ${onu_list} ${sn} |
Hardik Windlass | c609eb0 | 2022-02-22 11:28:37 +0000 | [diff] [blame] | 491 | Run Keyword IF '${service_type}' != 'mcast' Sanity Test TT one ONU ${src} ${dst} |
TorstenThieme | 1e207df | 2022-05-17 10:31:34 +0000 | [diff] [blame] | 492 | ... ${supression_flag} ${maclearning_enabled} |
Suchitra Vemuri | 85cb7d6 | 2020-07-16 23:46:16 -0700 | [diff] [blame] | 493 | END |
Hardik Windlass | 3ec9d4f | 2021-06-08 05:48:15 +0000 | [diff] [blame] | 494 | # Verify Subscriber Access Flow Count |
| 495 | @{particular_onu_device_port}= Create List |
| 496 | FOR ${I} IN RANGE 0 ${num_all_onus} |
| 497 | ${src}= Set Variable ${hosts.src[${I}]} |
| 498 | ${of_id}= Wait Until Keyword Succeeds ${timeout} 15s Validate OLT Device in ONOS ${src['olt']} |
Hardik Windlass | 1ed2eee | 2021-06-25 09:51:03 +0000 | [diff] [blame] | 499 | ${onu_port}= Wait Until Keyword Succeeds ${timeout} 2s Get ONU Port in ONOS |
| 500 | ... ${src['onu']} ${of_id} ${src['uni_id']} |
Hardik Windlass | 3ec9d4f | 2021-06-08 05:48:15 +0000 | [diff] [blame] | 501 | Append To List ${particular_onu_device_port} ${onu_port} |
| 502 | END |
| 503 | ${list_onu_port}= Remove Duplicates ${particular_onu_device_port} |
| 504 | ${num_of_provisioned_onus}= Get Length ${list_onu_port} |
| 505 | FOR ${I} IN RANGE 0 ${olt_count} |
| 506 | ${olt_serial_number}= Get From Dictionary ${olt_ids}[${I}] sn |
| 507 | ${olt_device_id}= Get OLTDeviceID From OLT List ${olt_serial_number} |
Hardik Windlass | 315d615 | 2021-06-09 08:22:44 +0000 | [diff] [blame] | 508 | ${of_id}= Wait Until Keyword Succeeds ${timeout} 15s Validate OLT Device in ONOS ${olt_serial_number} |
Hardik Windlass | 3ec9d4f | 2021-06-08 05:48:15 +0000 | [diff] [blame] | 509 | ${num_onus}= Set Variable ${list_olts}[${I}][onucount] |
| 510 | # Verify ONOS Flows |
| 511 | # Number of Access Flows on ONOS equals 16 * the Number of Active ONUs + 3 for default LLDP, IGMP and DHCP |
| 512 | ${onos_flows_count}= Run Keyword If ${has_dataplane} Evaluate 16 * ${num_of_provisioned_onus} + 3 |
| 513 | ... ELSE Evaluate 15 * ${num_of_provisioned_onus} + 3 |
Matteo Scandolo | c2f48fa | 2021-09-29 13:32:55 -0700 | [diff] [blame] | 514 | Wait Until Keyword Succeeds ${timeout} 5s |
Hardik Windlass | 3ec9d4f | 2021-06-08 05:48:15 +0000 | [diff] [blame] | 515 | ... Verify Added Flow Count for OLT TT ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${of_id} |
| 516 | ... ${onos_flows_count} |
Matteo Scandolo | 7bdbe2d | 2021-11-29 15:48:25 -0800 | [diff] [blame] | 517 | # Verify LLDP flow in ONOS |
Matteo Scandolo | 6a90bda | 2021-11-30 11:31:38 -0800 | [diff] [blame] | 518 | Wait Until Keyword Succeeds ${timeout} 5s |
Matteo Scandolo | 7bdbe2d | 2021-11-29 15:48:25 -0800 | [diff] [blame] | 519 | ... Verify LLDP Flow Added ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${of_id} 1 |
Hardik Windlass | 3ec9d4f | 2021-06-08 05:48:15 +0000 | [diff] [blame] | 520 | # Verify VOLTHA Flows |
| 521 | # Number of per OLT Flows equals 10 * Number of Active ONUs + 3 for default LLDP, IGMP and DHCP |
| 522 | ${olt_flows}= Run Keyword If ${has_dataplane} Evaluate 10 * ${num_of_provisioned_onus} + 3 |
| 523 | ... ELSE Evaluate 9 * ${num_of_provisioned_onus} + 3 |
| 524 | # Number of per ONU Flows equals 6 for 3play service data plane + 4 for Trap to Host Flows |
| 525 | ${onu_flows}= Run Keyword If ${has_dataplane} Set Variable 10 |
| 526 | ... ELSE Set Variable 9 |
| 527 | Run Keyword Wait Until Keyword Succeeds ${timeout} 5s Validate OLT Flows ${olt_flows} |
| 528 | ... ${olt_device_id} |
| 529 | ${List_ONU_Serial} Create List |
| 530 | Set Suite Variable ${List_ONU_Serial} |
| 531 | Build ONU SN List ${List_ONU_Serial} ${olt_serial_number} ${num_onus} |
| 532 | Log ${List_ONU_Serial} |
Hardik Windlass | 1ed2eee | 2021-06-25 09:51:03 +0000 | [diff] [blame] | 533 | # TODO: Fix ${onu_flows} calculations based on UNIs provisioned |
| 534 | # Run Keyword Wait Until Keyword Succeeds ${timeout} 5s Validate ONU Flows |
| 535 | # ... ${List_ONU_Serial} ${onu_flows} |
Hardik Windlass | 3ec9d4f | 2021-06-08 05:48:15 +0000 | [diff] [blame] | 536 | END |
Suchitra Vemuri | 85cb7d6 | 2020-07-16 23:46:16 -0700 | [diff] [blame] | 537 | |
Huseyin Ahmet AYDIN | 7cb5ae6 | 2021-10-28 11:07:27 +0000 | [diff] [blame] | 538 | Provision Subscription for ONU TT |
| 539 | [Documentation] This keyword performs provision services a single ONU for TT workflow |
Suchitra Vemuri | 85cb7d6 | 2020-07-16 23:46:16 -0700 | [diff] [blame] | 540 | ... Tests for one ONU |
TorstenThieme | 70bc526 | 2021-01-19 12:12:55 +0000 | [diff] [blame] | 541 | ... For repeating sanity test without subscriber changes set flag supress_add_subscriber=True. |
| 542 | ... In all other (common) cases flag has to be set False (default). |
| 543 | [Arguments] ${src} ${dst} ${supress_add_subscriber}=False |
Suchitra Vemuri | a6879aa | 2020-11-03 11:03:11 -0800 | [diff] [blame] | 544 | ${of_id}= Wait Until Keyword Succeeds ${timeout} 15s Validate OLT Device in ONOS ${src['olt']} |
Suchitra Vemuri | 2f1e07d | 2020-06-26 19:18:01 -0700 | [diff] [blame] | 545 | Set Global Variable ${of_id} |
TorstenThieme | dda3765 | 2021-11-11 16:22:05 +0000 | [diff] [blame] | 546 | ${nni_port}= Wait Until Keyword Succeeds ${timeout} 2s Get NNI Port in ONOS ${of_id} |
Andrea Speranza | 8b6f46f | 2022-08-23 14:22:15 +0200 | [diff] [blame] | 547 | ${onu_device_id}= Get Device ID From SN ${src['onu']} |
Hardik Windlass | 5a2d1f4 | 2021-11-12 12:52:04 +0000 | [diff] [blame] | 548 | ${onu_port}= Wait Until Keyword Succeeds ${timeout} 2s |
Hardik Windlass | 1ed2eee | 2021-06-25 09:51:03 +0000 | [diff] [blame] | 549 | ... Get ONU Port in ONOS ${src['onu']} ${of_id} ${src['uni_id']} |
Suchitra Vemuri | 85cb7d6 | 2020-07-16 23:46:16 -0700 | [diff] [blame] | 550 | # Check ONU port is Enabled in ONOS |
Hardik Windlass | 5a2d1f4 | 2021-11-12 12:52:04 +0000 | [diff] [blame] | 551 | Wait Until Keyword Succeeds ${timeout} 2s |
Hardik Windlass | 3901567 | 2021-07-05 05:48:08 +0000 | [diff] [blame] | 552 | ... Verify UNI Port Is Enabled ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${src['onu']} ${src['uni_id']} |
Hardik Windlass | b1bda36 | 2021-11-24 11:54:36 +0000 | [diff] [blame] | 553 | # Add subscriber |
| 554 | ${add_sub_cmd}= Run Keyword If ${unitag_sub} |
| 555 | ... Catenate volt-add-subscriber-unitag --tpId ${src['tp_id']} --sTag ${src['s_tag']} |
| 556 | ... --cTag ${src['c_tag']} ${src['onu']}-${src['uni_id']} |
| 557 | ... ELSE |
| 558 | ... Set Variable volt-add-subscriber-access ${of_id} ${onu_port} |
TorstenThieme | a36068c | 2021-02-19 09:57:32 +0000 | [diff] [blame] | 559 | Run Keyword Unless ${supress_add_subscriber} |
Hardik Windlass | b1bda36 | 2021-11-24 11:54:36 +0000 | [diff] [blame] | 560 | ... Execute ONOS CLI Command use single connection ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${add_sub_cmd} |
TorstenThieme | 1e207df | 2022-05-17 10:31:34 +0000 | [diff] [blame] | 561 | # Verify no Pending Flows in ONOS in case of subscriber added, it is needed to check the correct ONU state in voltha |
| 562 | # First wait for pending flows exist, but sometimes ONOS is so fast, that we don't catch it...so wait max 10s and ignore err |
| 563 | Run Keyword Unless ${supress_add_subscriber} Run Keyword And Ignore Error |
| 564 | ... Wait Until Keyword Succeeds 10s 1s |
| 565 | ... Verify Pending Flows For ONU ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${onu_port} |
| 566 | # Then wait for pending flows are disappeared again |
| 567 | Run Keyword Unless ${supress_add_subscriber} Wait Until Keyword Succeeds ${timeout} 2s |
| 568 | ... Verify No Pending Flows For ONU ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${onu_port} |
TorstenThieme | a36068c | 2021-02-19 09:57:32 +0000 | [diff] [blame] | 569 | # Verify ONU state in voltha |
Emrehan UZUN | ec59bea | 2021-05-27 13:45:57 +0000 | [diff] [blame] | 570 | ${onu_reasons}= Create List omci-flows-pushed onu-reenabled |
Hardik Windlass | 5a2d1f4 | 2021-11-12 12:52:04 +0000 | [diff] [blame] | 571 | Wait Until Keyword Succeeds ${timeout} 5s Validate Device |
TorstenThieme | 1e207df | 2022-05-17 10:31:34 +0000 | [diff] [blame] | 572 | ... ENABLED ACTIVE REACHABLE ${src['onu']} onu=True onu_reason=${onu_reasons} |
Huseyin Ahmet AYDIN | 7cb5ae6 | 2021-10-28 11:07:27 +0000 | [diff] [blame] | 573 | |
| 574 | Sanity Test TT one ONU |
| 575 | [Documentation] This keyword performs sanity test for a single ONU for TT workflow |
| 576 | ... Tests for one ONU |
| 577 | ... Assertions apply to HSIA, VoD, VoIP services |
| 578 | ... For repeating sanity test without subscriber changes set flag supress_add_subscriber=True. |
| 579 | ... In all other (common) cases flag has to be set False (default). |
Hardik Windlass | c609eb0 | 2022-02-22 11:28:37 +0000 | [diff] [blame] | 580 | [Arguments] ${src} ${dst} ${supress_add_subscriber}=False ${maclearning_enabled}=False |
Huseyin Ahmet AYDIN | 7cb5ae6 | 2021-10-28 11:07:27 +0000 | [diff] [blame] | 581 | Provision Subscription for ONU TT ${src} ${dst} ${supress_add_subscriber} |
| 582 | ${of_id}= Wait Until Keyword Succeeds ${timeout} 15s Validate OLT Device in ONOS ${src['olt']} |
| 583 | Set Global Variable ${of_id} |
| 584 | ${onu_port}= Wait Until Keyword Succeeds ${timeout} 2s Get ONU Port in ONOS ${src['onu']} |
| 585 | ... ${of_id} ${src['uni_id']} |
Suchitra Vemuri | 85cb7d6 | 2020-07-16 23:46:16 -0700 | [diff] [blame] | 586 | # TODO: Yet to Verify on the GPON based Physical POD (VOL-2652) |
| 587 | Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure Validate DHCP and Ping True |
| 588 | ... True ${src['dp_iface_name']} ${src['s_tag']} ${src['c_tag']} ${dst['dp_iface_ip_qinq']} |
| 589 | ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']} |
| 590 | ... ${dst['dp_iface_name']} ${dst['ip']} ${dst['user']} ${dst['pass']} ${dst['container_type']} |
| 591 | ... ${dst['container_name']} |
Hardik Windlass | c609eb0 | 2022-02-22 11:28:37 +0000 | [diff] [blame] | 592 | Run Keyword If '${src['service_type']}'!='hsia' |
| 593 | ... Run Keywords |
Hardik Windlass | 5a2d1f4 | 2021-11-12 12:52:04 +0000 | [diff] [blame] | 594 | ... Wait Until Keyword Succeeds ${timeout} 2s |
Suchitra Vemuri | 8d3b003 | 2020-09-11 17:49:08 -0700 | [diff] [blame] | 595 | ... Validate Subscriber DHCP Allocation ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${onu_port} |
Suchitra Vemuri | 4281941 | 2020-10-01 17:45:43 -0700 | [diff] [blame] | 596 | ... ${src['c_tag']} |
Hardik Windlass | c609eb0 | 2022-02-22 11:28:37 +0000 | [diff] [blame] | 597 | ... AND Run Keyword If ${maclearning_enabled} |
| 598 | ... Wait Until Keyword Succeeds ${timeout} 5s Validate Mac Learner Mapping in ONOS |
| 599 | ... ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${of_id} ${onu_port} ${src['c_tag']} |
Suchitra Vemuri | 85cb7d6 | 2020-07-16 23:46:16 -0700 | [diff] [blame] | 600 | |
| 601 | Perform Sanity Test TT MCAST |
| 602 | [Documentation] This keyword performs Sanity Test Procedure for TT Workflow |
| 603 | ... Adds subscribers |
| 604 | ... Validates for MCAST |
TorstenThieme | 70bc526 | 2021-01-19 12:12:55 +0000 | [diff] [blame] | 605 | ... For repeating sanity test without subscriber changes set flag supress_add_subscriber=True. |
| 606 | ... In all other (common) cases flag has to be set False (default). |
| 607 | [Arguments] ${supress_add_subscriber}=False |
Suchitra Vemuri | a6879aa | 2020-11-03 11:03:11 -0800 | [diff] [blame] | 608 | FOR ${I} IN RANGE 0 ${num_all_onus} |
Suchitra Vemuri | 2f1e07d | 2020-06-26 19:18:01 -0700 | [diff] [blame] | 609 | ${src}= Set Variable ${hosts.src[${I}]} |
| 610 | ${dst}= Set Variable ${hosts.dst[${I}]} |
Suchitra Vemuri | 85cb7d6 | 2020-07-16 23:46:16 -0700 | [diff] [blame] | 611 | ${service_type}= Get Variable Value ${src['service_type']} "null" |
| 612 | Run Keyword IF '${service_type}' == 'mcast' Sanity Test TT MCAST one ONU ${src} |
TorstenThieme | a36068c | 2021-02-19 09:57:32 +0000 | [diff] [blame] | 613 | ... ${dst} ${supress_add_subscriber} |
Suchitra Vemuri | 2f1e07d | 2020-06-26 19:18:01 -0700 | [diff] [blame] | 614 | END |
Suchitra Vemuri | 85cb7d6 | 2020-07-16 23:46:16 -0700 | [diff] [blame] | 615 | |
| 616 | Sanity Test TT MCAST one ONU |
| 617 | [Documentation] This keyword performs sanity test for a single ONU for TT workflow |
| 618 | ... Tests for one ONU |
| 619 | ... Assertions apply to MCAST services |
TorstenThieme | 70bc526 | 2021-01-19 12:12:55 +0000 | [diff] [blame] | 620 | ... For repeating sanity test without subscriber changes set flag supress_add_subscriber=True. |
| 621 | ... In all other (common) cases flag has to be set False (default). |
| 622 | [Arguments] ${src} ${dst} ${supress_add_subscriber}=False |
Suchitra Vemuri | 85cb7d6 | 2020-07-16 23:46:16 -0700 | [diff] [blame] | 623 | # Check for iperf and jq tools |
| 624 | ${stdout} ${stderr} ${rc}= Execute Remote Command which iperf jq |
| 625 | ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} |
| 626 | ... ${src['container_name']} |
| 627 | Pass Execution If ${rc} != 0 Skipping test: iperf / jq not found on the RG |
| 628 | |
| 629 | #Reset the IP on the interface |
| 630 | ${output}= Login And Run Command On Remote System sudo ifconfig ${src['dp_iface_name']} 0 |
| 631 | ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']} |
| 632 | # Kill iperf on BNG |
| 633 | ${rg_output}= Run Keyword and Continue On Failure Login And Run Command On Remote System |
| 634 | ... sudo kill -9 `pidof iperf` |
| 635 | ... ${dst['bng_ip']} ${dst['bng_user']} ${dst['bng_pass']} ${dst['container_type']} |
| 636 | ... ${dst['container_name']} |
| 637 | |
| 638 | # Setup RG for Multi-cast test |
| 639 | ${output}= Login And Run Command On Remote System |
| 640 | ... sudo ifconfig ${src['dp_iface_name']} ${src['mcast_rg']} up ; sudo kill -9 `pidof iperf` |
| 641 | ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']} |
| 642 | ${output}= Login And Run Command On Remote System |
| 643 | ... sudo ip route add ${src['mcast_grp_subnet_mask']} dev ${src['dp_iface_name']} scope link |
| 644 | ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']} |
| 645 | |
| 646 | # Perform operations for adding subscriber |
Suchitra Vemuri | a6879aa | 2020-11-03 11:03:11 -0800 | [diff] [blame] | 647 | ${of_id}= Wait Until Keyword Succeeds ${timeout} 15s Validate OLT Device in ONOS ${src['olt']} |
Suchitra Vemuri | 85cb7d6 | 2020-07-16 23:46:16 -0700 | [diff] [blame] | 648 | Set Global Variable ${of_id} |
TorstenThieme | dda3765 | 2021-11-11 16:22:05 +0000 | [diff] [blame] | 649 | ${nni_port}= Wait Until Keyword Succeeds ${timeout} 2s Get NNI Port in ONOS ${of_id} |
Andrea Speranza | 8b6f46f | 2022-08-23 14:22:15 +0200 | [diff] [blame] | 650 | ${onu_device_id}= Get Device ID From SN ${src['onu']} |
Hardik Windlass | 5a2d1f4 | 2021-11-12 12:52:04 +0000 | [diff] [blame] | 651 | ${onu_port}= Wait Until Keyword Succeeds ${timeout} 2s |
Hardik Windlass | 1ed2eee | 2021-06-25 09:51:03 +0000 | [diff] [blame] | 652 | ... Get ONU Port in ONOS ${src['onu']} ${of_id} ${src['uni_id']} |
Suchitra Vemuri | 85cb7d6 | 2020-07-16 23:46:16 -0700 | [diff] [blame] | 653 | # Check ONU port is Enabled in ONOS |
Hardik Windlass | 5a2d1f4 | 2021-11-12 12:52:04 +0000 | [diff] [blame] | 654 | Wait Until Keyword Succeeds ${timeout} 2s |
Hardik Windlass | 3901567 | 2021-07-05 05:48:08 +0000 | [diff] [blame] | 655 | ... Verify UNI Port Is Enabled ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${src['onu']} ${src['uni_id']} |
TorstenThieme | a36068c | 2021-02-19 09:57:32 +0000 | [diff] [blame] | 656 | Run Keyword Unless ${supress_add_subscriber} |
TorstenThieme | 4e2168e | 2021-06-22 14:01:47 +0000 | [diff] [blame] | 657 | ... Execute ONOS CLI Command use single connection ${ONOS_SSH_IP} ${ONOS_SSH_PORT} |
Suchitra Vemuri | 85cb7d6 | 2020-07-16 23:46:16 -0700 | [diff] [blame] | 658 | ... volt-add-subscriber-access ${of_id} ${onu_port} |
TorstenThieme | a36068c | 2021-02-19 09:57:32 +0000 | [diff] [blame] | 659 | # Verify ONU state in voltha |
Emrehan UZUN | ec59bea | 2021-05-27 13:45:57 +0000 | [diff] [blame] | 660 | ${onu_reasons}= Create List omci-flows-pushed onu-reenabled |
Hardik Windlass | 5a2d1f4 | 2021-11-12 12:52:04 +0000 | [diff] [blame] | 661 | Wait Until Keyword Succeeds ${timeout} 5s Validate Device |
Suchitra Vemuri | 85cb7d6 | 2020-07-16 23:46:16 -0700 | [diff] [blame] | 662 | ... ENABLED ACTIVE REACHABLE |
Matteo Scandolo | 74bd5c3 | 2020-12-08 09:52:19 -0800 | [diff] [blame] | 663 | ... ${src['onu']} onu=True onu_reason=${onu_reasons} |
Suchitra Vemuri | 85cb7d6 | 2020-07-16 23:46:16 -0700 | [diff] [blame] | 664 | |
| 665 | # Setup iperf on the BNG |
| 666 | ${server_output}= Login And Run Command On Remote System |
| 667 | ... sudo iperf -c ${dst['dp_iface_ip_qinq']} -u -T 32 -t 60 -i 1 & |
| 668 | ... ${dst['bng_ip']} ${dst['bng_user']} ${dst['bng_pass']} ${dst['container_type']} |
| 669 | ... ${dst['container_name']} |
| 670 | |
| 671 | # Setup iperf on the RG |
| 672 | ${rg_output}= Run Keyword and Continue On Failure Wait Until Keyword Succeeds 90s 5s |
| 673 | ... Login And Run Command On Remote System |
| 674 | ... rm -rf /tmp/rg_output ; sudo iperf -s -u -B ${dst['dp_iface_ip_qinq']} -i 1 -D >> /tmp/rg_output |
| 675 | ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']} |
| 676 | Log ${rg_output} |
| 677 | Sleep 60s |
| 678 | ${output}= Run Keyword and Continue On Failure Wait Until Keyword Succeeds 90s 5s |
| 679 | ... Login And Run Command On Remote System |
| 680 | ... cat /tmp/rg_output | grep KBytes |
| 681 | ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']} |
| 682 | Log ${output} |
Cristina de Francisco | c4cfd7e | 2023-10-09 10:55:08 +0200 | [diff] [blame^] | 683 | Should Contain ${output} KBytes Could not find 'KBytes' in iperf output |
Suchitra Vemuri | 85cb7d6 | 2020-07-16 23:46:16 -0700 | [diff] [blame] | 684 | |
| 685 | # Kill iperf on BNG |
| 686 | ${rg_output}= Run Keyword and Continue On Failure Login And Run Command On Remote System |
| 687 | ... sudo kill -9 `pidof iperf` |
| 688 | ... ${dst['bng_ip']} ${dst['bng_user']} ${dst['bng_pass']} ${dst['container_type']} |
| 689 | ... ${dst['container_name']} |
| 690 | |
| 691 | # Kill iperf on the RG |
| 692 | ${output}= Run Keyword and Continue On Failure Login And Run Command On Remote System |
| 693 | ... sudo kill -9 `pidof iperf` |
| 694 | ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']} |
| 695 | |
Hardik Windlass | 62db9d9 | 2021-05-17 09:32:40 +0000 | [diff] [blame] | 696 | Setup Soak |
| 697 | [Documentation] Pre-test Setup for Soak Job |
| 698 | ${olt_ids} Create List |
| 699 | FOR ${I} IN RANGE 0 ${num_olts} |
| 700 | ${olt_serial_number}= Set Variable ${list_olts}[${I}][sn] |
| 701 | ${olt_device_id}= Get Device ID From SN ${olt_serial_number} |
| 702 | ${logical_id}= Get Logical Device ID From SN ${olt_serial_number} |
| 703 | ${of_id}= Wait Until Keyword Succeeds ${timeout} 15s Validate OLT Device in ONOS |
| 704 | ... ${olt_serial_number} |
TorstenThieme | dda3765 | 2021-11-11 16:22:05 +0000 | [diff] [blame] | 705 | ${nni_port}= Wait Until Keyword Succeeds ${timeout} 2s Get NNI Port in ONOS ${of_id} |
Hardik Windlass | 62db9d9 | 2021-05-17 09:32:40 +0000 | [diff] [blame] | 706 | ${olt} Create Dictionary device_id ${olt_device_id} logical_id ${logical_id} |
| 707 | ... of_id ${of_id} sn ${olt_serial_number} |
| 708 | Append To List ${olt_ids} ${olt} |
| 709 | END |
| 710 | Set Global Variable ${olt_ids} |
Suchitra Vemuri | 2f1e07d | 2020-06-26 19:18:01 -0700 | [diff] [blame] | 711 | |
Gayathri.Selvan | ee4a91b | 2020-01-17 06:49:53 +0000 | [diff] [blame] | 712 | Setup |
| 713 | [Documentation] Pre-test Setup |
Hardik Windlass | 4ed5450 | 2021-05-14 07:34:15 +0000 | [diff] [blame] | 714 | [Arguments] ${skip_empty_device_list_test}=False |
Gayathri.Selvan | ee4a91b | 2020-01-17 06:49:53 +0000 | [diff] [blame] | 715 | #test for empty device list |
Hardik Windlass | 4ed5450 | 2021-05-14 07:34:15 +0000 | [diff] [blame] | 716 | Run Keyword If '${skip_empty_device_list_test}'=='False' Test Empty Device List |
Hardik Windlass | 5e214b2 | 2021-02-26 10:37:14 +0000 | [diff] [blame] | 717 | # TBD: Need for this Sleep |
| 718 | Run Keyword If ${has_dataplane} Sleep 180s |
Suchitra Vemuri | a6879aa | 2020-11-03 11:03:11 -0800 | [diff] [blame] | 719 | # Create a list of olt ids (logical and device_id) |
| 720 | ${olt_ids} Create List |
| 721 | FOR ${I} IN RANGE 0 ${num_olts} |
| 722 | #create/preprovision device |
Andrea Campanella | 3dcce27 | 2021-01-15 16:04:47 +0100 | [diff] [blame] | 723 | ${olt_device_id}= Run Keyword If "${list_olts}[${I}][type]" == "${None}" |
Suchitra Vemuri | 09f878d | 2021-02-10 18:19:04 -0800 | [diff] [blame] | 724 | ... Create Device ${list_olts}[${I}][ip] ${list_olts}[${I}][oltport] |
| 725 | ... ELSE Create Device ${list_olts}[${I}][ip] ${list_olts}[${I}][oltport] ${list_olts}[${I}][type] |
Suchitra Vemuri | a6879aa | 2020-11-03 11:03:11 -0800 | [diff] [blame] | 726 | ${olt_serial_number}= Set Variable ${list_olts}[${I}][sn] |
| 727 | #Set Suite Variable ${olt_device_id} |
| 728 | #validate olt states |
| 729 | Wait Until Keyword Succeeds ${timeout} 5s |
Hardik Windlass | 8b44649 | 2021-06-10 06:25:23 +0000 | [diff] [blame] | 730 | ... Validate OLT Device PREPROVISIONED UNKNOWN UNKNOWN ${olt_device_id} by_dev_id=True |
Suchitra Vemuri | a6879aa | 2020-11-03 11:03:11 -0800 | [diff] [blame] | 731 | Sleep 5s |
| 732 | Enable Device ${olt_device_id} |
Suchitra Vemuri | cf6e89c | 2021-03-24 19:14:15 -0700 | [diff] [blame] | 733 | # Increasing the timer to incorporate wait time for in-band |
| 734 | Wait Until Keyword Succeeds 540s 5s |
Suchitra Vemuri | a6879aa | 2020-11-03 11:03:11 -0800 | [diff] [blame] | 735 | ... Validate OLT Device ENABLED ACTIVE REACHABLE ${olt_serial_number} |
| 736 | ${logical_id}= Get Logical Device ID From SN ${olt_serial_number} |
| 737 | # Set Suite Variable ${logical_id} |
| 738 | ${of_id}= Wait Until Keyword Succeeds ${timeout} 15s Validate OLT Device in ONOS |
| 739 | ... ${olt_serial_number} |
| 740 | ${olt} Create Dictionary device_id ${olt_device_id} logical_id ${logical_id} |
| 741 | ... of_id ${of_id} sn ${olt_serial_number} |
| 742 | Append To List ${olt_ids} ${olt} |
| 743 | END |
| 744 | Set Global Variable ${olt_ids} |
| 745 | |
| 746 | Get ofID From OLT List |
| 747 | [Documentation] Retrieves the corresponding of_id for the OLT serial number specified |
| 748 | [Arguments] ${serial_number} |
| 749 | FOR ${I} IN RANGE 0 ${olt_count} |
| 750 | ${sn}= Get From Dictionary ${olt_ids}[${I}] sn |
Andrea Campanella | 317a94c | 2020-11-13 10:38:19 +0100 | [diff] [blame] | 751 | ${of_id}= Run Keyword IF "${serial_number}"=="${sn}" |
| 752 | ... Get From Dictionary ${olt_ids}[${I}] of_id ELSE Set Variable ${of_id} |
Suchitra Vemuri | a6879aa | 2020-11-03 11:03:11 -0800 | [diff] [blame] | 753 | END |
| 754 | [Return] ${of_id} |
| 755 | |
| 756 | Get OLTDeviceID From OLT List |
| 757 | [Documentation] Retrieves the corresponding olt_device_id for the OLT serial number specified |
| 758 | [Arguments] ${serial_number} |
Suchitra Vemuri | 4b8f4f5 | 2020-11-17 19:12:50 -0800 | [diff] [blame] | 759 | ${olt_device_id}= Set Variable 0 |
Suchitra Vemuri | a6879aa | 2020-11-03 11:03:11 -0800 | [diff] [blame] | 760 | FOR ${I} IN RANGE 0 ${olt_count} |
| 761 | ${sn}= Get From Dictionary ${olt_ids}[${I}] sn |
Andrea Campanella | 317a94c | 2020-11-13 10:38:19 +0100 | [diff] [blame] | 762 | ${olt_device_id}= Run Keyword IF "${serial_number}"=="${sn}" |
| 763 | ... Get From Dictionary ${olt_ids}[${I}] device_id ELSE Set Variable ${olt_device_id} |
Suchitra Vemuri | a6879aa | 2020-11-03 11:03:11 -0800 | [diff] [blame] | 764 | END |
| 765 | [Return] ${olt_device_id} |
Gayathri.Selvan | ee4a91b | 2020-01-17 06:49:53 +0000 | [diff] [blame] | 766 | |
Andrea Campanella | d848de0 | 2020-11-24 10:23:41 +0100 | [diff] [blame] | 767 | Get Num of Onus From OLT SN |
| 768 | [Documentation] Retrieves the corresponding number of ONUs for a given OLT based on serial number specified |
| 769 | [Arguments] ${serial_number} |
| 770 | ${num_of_olt_onus}= Set Variable 0 |
| 771 | FOR ${I} IN RANGE 0 ${olt_count} |
| 772 | ${sn}= Get From Dictionary ${olt_ids}[${I}] sn |
| 773 | ${num_of_olt_onus}= Run Keyword IF "${serial_number}"=="${sn}" |
| 774 | ... Get From Dictionary ${list_olts}[${I}] onucount ELSE Set Variable ${num_of_olt_onus} |
| 775 | END |
| 776 | [Return] ${num_of_olt_onus} |
| 777 | |
Hardik Windlass | aaea340 | 2020-03-10 19:45:45 +0530 | [diff] [blame] | 778 | Validate ONUs After OLT Disable |
| 779 | [Documentation] Validates the ONUs state in Voltha, ONUs port state in ONOS |
| 780 | ... and that pings do not succeed After corresponding OLT is Disabled |
Andrea Campanella | 4e50788 | 2020-11-26 11:33:11 +0100 | [diff] [blame] | 781 | [Arguments] ${num_onus} ${olt_serial_number} |
Hardik Windlass | aaea340 | 2020-03-10 19:45:45 +0530 | [diff] [blame] | 782 | FOR ${I} IN RANGE 0 ${num_onus} |
| 783 | ${src}= Set Variable ${hosts.src[${I}]} |
| 784 | ${dst}= Set Variable ${hosts.dst[${I}]} |
Andrea Campanella | 4e50788 | 2020-11-26 11:33:11 +0100 | [diff] [blame] | 785 | Continue For Loop If "${olt_serial_number}"!="${src['olt']}" |
Suchitra Vemuri | a6879aa | 2020-11-03 11:03:11 -0800 | [diff] [blame] | 786 | ${of_id}= Get ofID From OLT List ${src['olt']} |
Andrea Speranza | 8b6f46f | 2022-08-23 14:22:15 +0200 | [diff] [blame] | 787 | ${onu_device_id}= Get Device ID From SN ${src['onu']} |
Hardik Windlass | aaea340 | 2020-03-10 19:45:45 +0530 | [diff] [blame] | 788 | ${onu_port}= Wait Until Keyword Succeeds ${timeout} 2s Get ONU Port in ONOS ${src['onu']} |
| 789 | ... ${of_id} |
Girish Gowdra | 3f0fadb | 2021-11-08 16:49:28 -0800 | [diff] [blame] | 790 | ${valid_onu_states}= Create List stopping-openomci omci-flows-deleted |
Hardik Windlass | aaea340 | 2020-03-10 19:45:45 +0530 | [diff] [blame] | 791 | Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s |
| 792 | ... Validate Device ENABLED DISCOVERED |
Girish Gowdra | 3f0fadb | 2021-11-08 16:49:28 -0800 | [diff] [blame] | 793 | ... UNREACHABLE ${src['onu']} onu=True onu_reason=${valid_onu_states} |
Hardik Windlass | 58b23a3 | 2022-05-10 11:06:48 +0530 | [diff] [blame] | 794 | Wait Until Keyword Succeeds ${timeout} 2s |
Emrehan UZUN | abef518 | 2021-11-26 10:54:24 +0000 | [diff] [blame] | 795 | ... Verify UNI Port Is Disabled ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${src['onu']} ${src['uni_id']} |
Hardik Windlass | aaea340 | 2020-03-10 19:45:45 +0530 | [diff] [blame] | 796 | Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure |
Hardik Windlass | 58b23a3 | 2022-05-10 11:06:48 +0530 | [diff] [blame] | 797 | ... Wait Until Keyword Succeeds ${timeout} 2s |
Hardik Windlass | aaea340 | 2020-03-10 19:45:45 +0530 | [diff] [blame] | 798 | ... Check Ping False ${dst['dp_iface_ip_qinq']} ${src['dp_iface_name']} |
| 799 | ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']} |
Hardik Windlass | aaea340 | 2020-03-10 19:45:45 +0530 | [diff] [blame] | 800 | END |
| 801 | |
Gayathri.Selvan | ee4a91b | 2020-01-17 06:49:53 +0000 | [diff] [blame] | 802 | Delete All Devices and Verify |
| 803 | [Documentation] Remove any devices from VOLTHA and ONOS |
Hardik Windlass | c609eb0 | 2022-02-22 11:28:37 +0000 | [diff] [blame] | 804 | [Arguments] ${maclearning_enabled}=False |
Gayathri.Selvan | ee4a91b | 2020-01-17 06:49:53 +0000 | [diff] [blame] | 805 | # Clear devices from VOLTHA |
| 806 | Disable Devices In Voltha Root=true |
| 807 | Wait Until Keyword Succeeds ${timeout} 2s Test Devices Disabled In Voltha Root=true |
| 808 | Delete Devices In Voltha Root=true |
| 809 | Wait Until Keyword Succeeds ${timeout} 2s Test Empty Device List |
Hardik Windlass | e8b9922 | 2021-01-25 10:03:14 +0000 | [diff] [blame] | 810 | FOR ${I} IN RANGE 0 ${num_olts} |
| 811 | ${olt_serial_number}= Set Variable ${list_olts}[${I}][sn] |
Matteo Scandolo | 71ff08a | 2021-10-21 17:47:27 -0700 | [diff] [blame] | 812 | Wait Until Keyword Succeeds ${timeout} 5s |
Hardik Windlass | e8b9922 | 2021-01-25 10:03:14 +0000 | [diff] [blame] | 813 | ... Validate Deleted Device Cleanup In ONOS ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${olt_serial_number} |
Hardik Windlass | c609eb0 | 2022-02-22 11:28:37 +0000 | [diff] [blame] | 814 | ... ${maclearning_enabled} |
Hardik Windlass | e8b9922 | 2021-01-25 10:03:14 +0000 | [diff] [blame] | 815 | END |
Hardik Windlass | 44abec1 | 2021-09-27 07:52:33 +0000 | [diff] [blame] | 816 | Wait Until Keyword Succeeds ${timeout} 5s Validate Cleanup In ETCD ${INFRA_NAMESPACE} |
Gayathri.Selvan | ee4a91b | 2020-01-17 06:49:53 +0000 | [diff] [blame] | 817 | |
| 818 | Teardown |
| 819 | [Documentation] kills processes and cleans up interfaces on src+dst servers |
| 820 | Run Keyword If ${has_dataplane} Clean Up Linux |
Gayathri.Selvan | ee4a91b | 2020-01-17 06:49:53 +0000 | [diff] [blame] | 821 | |
| 822 | Teardown Suite |
| 823 | [Documentation] Clean up device if desired |
Andrea Campanella | 82add37 | 2021-11-05 12:01:15 +0100 | [diff] [blame] | 824 | Start Logging Setup or Teardown Teardown-${SUITE NAME} |
Hardik Windlass | 8137522 | 2021-12-02 10:48:01 +0000 | [diff] [blame] | 825 | Run Keyword If ${has_dataplane} Clean Up Linux |
Gayathri.Selvan | ee4a91b | 2020-01-17 06:49:53 +0000 | [diff] [blame] | 826 | Run Keyword If ${teardown_device} Delete All Devices and Verify |
Andrea Campanella | 1ff0322 | 2021-09-10 10:14:21 +0200 | [diff] [blame] | 827 | Run Keyword And Continue On Failure Collect Logs |
TorstenThieme | 4e2168e | 2021-06-22 14:01:47 +0000 | [diff] [blame] | 828 | Close All ONOS SSH Connections |
Hardik Windlass | 8137522 | 2021-12-02 10:48:01 +0000 | [diff] [blame] | 829 | Run Keyword If ${has_dataplane} Clean Up All Nodes |
Andrea Campanella | 82add37 | 2021-11-05 12:01:15 +0100 | [diff] [blame] | 830 | Stop Logging Setup or Teardown Teardown-${SUITE NAME} |
Gayathri.Selvan | ee4a91b | 2020-01-17 06:49:53 +0000 | [diff] [blame] | 831 | |
| 832 | Delete Device and Verify |
Suchitra Vemuri | a6879aa | 2020-11-03 11:03:11 -0800 | [diff] [blame] | 833 | [Arguments] ${olt_serial_number} |
Gayathri.Selvan | ee4a91b | 2020-01-17 06:49:53 +0000 | [diff] [blame] | 834 | [Documentation] Disable -> Delete devices via voltctl and verify its removed |
Suchitra Vemuri | 2fa9bba | 2020-01-22 17:38:48 -0800 | [diff] [blame] | 835 | ${olt_device_id}= Get Device ID From SN ${olt_serial_number} |
Gayathri.Selvan | ee4a91b | 2020-01-17 06:49:53 +0000 | [diff] [blame] | 836 | ${rc} ${output}= Run and Return Rc and Output |
Matteo Scandolo | 5899be1 | 2020-11-11 15:38:07 -0800 | [diff] [blame] | 837 | ... voltctl -c ${VOLTCTL_CONFIG} device disable ${olt_device_id} |
Cristina de Francisco | c4cfd7e | 2023-10-09 10:55:08 +0200 | [diff] [blame^] | 838 | Should Be Equal As Integers ${rc} 0 Could not disable device ${olt_device_id} |
Gayathri.Selvan | ee4a91b | 2020-01-17 06:49:53 +0000 | [diff] [blame] | 839 | Sleep 5s |
| 840 | Wait Until Keyword Succeeds ${timeout} 5s |
| 841 | ... Validate OLT Device DISABLED UNKNOWN REACHABLE ${olt_serial_number} |
| 842 | ${rc} ${output}= Run and Return Rc and Output |
Matteo Scandolo | 5899be1 | 2020-11-11 15:38:07 -0800 | [diff] [blame] | 843 | ... voltctl -c ${VOLTCTL_CONFIG} device delete ${olt_device_id} |
Hardik Windlass | df5035e | 2021-01-27 08:34:59 +0000 | [diff] [blame] | 844 | Sleep 50s |
Cristina de Francisco | c4cfd7e | 2023-10-09 10:55:08 +0200 | [diff] [blame^] | 845 | Should Be Equal As Integers ${rc} 0 Could not delete device ${olt_device_id} |
Gayathri.Selvan | ee4a91b | 2020-01-17 06:49:53 +0000 | [diff] [blame] | 846 | Wait Until Keyword Succeeds ${timeout} 5s Validate Device Removed ${olt_device_id} |
Hardik Windlass | e8b9922 | 2021-01-25 10:03:14 +0000 | [diff] [blame] | 847 | Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 15s |
| 848 | ... Validate Deleted Device Cleanup In ONOS ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${olt_serial_number} |
Gayathri.Selvan | ee4a91b | 2020-01-17 06:49:53 +0000 | [diff] [blame] | 849 | |
Gayathri.Selvan | 283a63c | 2020-01-23 04:09:18 +0000 | [diff] [blame] | 850 | Repeat Sanity Test |
| 851 | [Documentation] This keyword performs Sanity Test Procedure |
| 852 | ... Sanity test performs authentication, dhcp and pings for all the ONUs given for the POD |
| 853 | ... This keyword can be used to call in any other tests where sanity check is required |
| 854 | ... with wpa reassociation |
| 855 | ${of_id}= Wait Until Keyword Succeeds ${timeout} 15s Validate OLT Device in ONOS ${olt_serial_number} |
| 856 | Set Global Variable ${of_id} |
Suchitra Vemuri | a6879aa | 2020-11-03 11:03:11 -0800 | [diff] [blame] | 857 | FOR ${I} IN RANGE 0 ${num_all_onus} |
Gayathri.Selvan | 283a63c | 2020-01-23 04:09:18 +0000 | [diff] [blame] | 858 | ${src}= Set Variable ${hosts.src[${I}]} |
| 859 | ${dst}= Set Variable ${hosts.dst[${I}]} |
Suchitra Vemuri | 8078b97 | 2020-02-06 19:07:41 -0800 | [diff] [blame] | 860 | ${onu_port}= Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s |
Emrehan UZUN | abef518 | 2021-11-26 10:54:24 +0000 | [diff] [blame] | 861 | ... Get ONU Port in ONOS ${src['onu']} ${of_id} ${src['uni_id']} |
Suchitra Vemuri | 8078b97 | 2020-02-06 19:07:41 -0800 | [diff] [blame] | 862 | # Check ONU port is Enabled in ONOD |
| 863 | Run Keyword And Continue On Failure Wait Until Keyword Succeeds 120s 2s |
Emrehan UZUN | abef518 | 2021-11-26 10:54:24 +0000 | [diff] [blame] | 864 | ... Verify UNI Port Is Enabled ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${src['onu']} ${src['uni_id']} |
Suchitra Vemuri | 8078b97 | 2020-02-06 19:07:41 -0800 | [diff] [blame] | 865 | # Verify EAPOL flows are added for the ONU port |
| 866 | Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s |
Matteo Scandolo | 7e519fb | 2021-08-13 11:35:16 -0700 | [diff] [blame] | 867 | ... Verify Eapol Flows Added For ONU ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${of_id} ${onu_port} |
Suchitra Vemuri | 8078b97 | 2020-02-06 19:07:41 -0800 | [diff] [blame] | 868 | # Verify ONU state in voltha |
Suchitra Vemuri | d1e27fb | 2020-02-01 16:34:37 -0800 | [diff] [blame] | 869 | Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s Validate Device |
Suchitra Vemuri | 81e4f02 | 2020-02-01 13:16:02 -0800 | [diff] [blame] | 870 | ... ENABLED ACTIVE REACHABLE |
| 871 | ... ${src['onu']} onu=True onu_reason=omci-flows-pushed |
Suchitra Vemuri | 8078b97 | 2020-02-06 19:07:41 -0800 | [diff] [blame] | 872 | # Perform Authentication |
Gayathri.Selvan | 283a63c | 2020-01-23 04:09:18 +0000 | [diff] [blame] | 873 | Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure |
| 874 | ... Validate Authentication After Reassociate |
| 875 | ... True ${src['dp_iface_name']} ${src['ip']} ${src['user']} ${src['pass']} |
| 876 | ... ${src['container_type']} ${src['container_name']} |
| 877 | Wait Until Keyword Succeeds ${timeout} 2s |
David K. Bainbridge | c0617c9 | 2020-03-05 21:17:19 -0800 | [diff] [blame] | 878 | ... Verify ONU in AAA-Users ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${onu_port} |
Gayathri.Selvan | 283a63c | 2020-01-23 04:09:18 +0000 | [diff] [blame] | 879 | Wait Until Keyword Succeeds ${timeout} 2s |
TorstenThieme | 4e2168e | 2021-06-22 14:01:47 +0000 | [diff] [blame] | 880 | ... Execute ONOS CLI Command use single connection ${ONOS_SSH_IP} ${ONOS_SSH_PORT} |
Gayathri.Selvan | 283a63c | 2020-01-23 04:09:18 +0000 | [diff] [blame] | 881 | ... volt-add-subscriber-access ${of_id} ${onu_port} |
| 882 | Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure |
| 883 | ... Validate DHCP and Ping True True |
| 884 | ... ${src['dp_iface_name']} ${src['s_tag']} ${src['c_tag']} ${dst['dp_iface_ip_qinq']} |
| 885 | ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']} |
| 886 | ... ${dst['dp_iface_name']} ${dst['ip']} ${dst['user']} ${dst['pass']} ${dst['container_type']} |
| 887 | ... ${dst['container_name']} |
| 888 | Wait Until Keyword Succeeds ${timeout} 2s Run Keyword And Continue On Failure |
David K. Bainbridge | c0617c9 | 2020-03-05 21:17:19 -0800 | [diff] [blame] | 889 | ... Validate Subscriber DHCP Allocation ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${onu_port} |
Gayathri.Selvan | 283a63c | 2020-01-23 04:09:18 +0000 | [diff] [blame] | 890 | END |
Gayathri.Selvan | b6a2b54 | 2020-01-24 07:24:23 +0000 | [diff] [blame] | 891 | |
Hardik Windlass | 41701e8 | 2021-01-12 17:44:44 +0000 | [diff] [blame] | 892 | Disable Enable PON Port Per OLT |
| 893 | [Arguments] ${olt_serial_number} |
| 894 | [Documentation] This keyword disables and then enables OLT PON port and |
| 895 | ... also validate ONUs for each corresponding case |
| 896 | ${olt_device_id}= Get OLTDeviceID From OLT List ${olt_serial_number} |
| 897 | ${olt_pon_port_list}= Retrieve OLT PON Ports ${olt_device_id} |
| 898 | ${olt_pon_port_list_len}= Get Length ${olt_pon_port_list} |
| 899 | FOR ${INDEX0} IN RANGE 0 ${olt_pon_port_list_len} |
| 900 | ${olt_pon_port}= Get From List ${olt_pon_port_list} ${INDEX0} |
| 901 | ${olt_peer_list}= Retrieve Peer List From OLT PON Port ${olt_device_id} ${olt_pon_port} |
| 902 | # Disable the OLT PON Port and Validate OLT Device |
| 903 | DisableOrEnable OLT PON Port disable ${olt_device_id} ${olt_pon_port} |
| 904 | Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s |
| 905 | ... Validate OLT PON Port Status ${olt_device_id} ${olt_pon_port} |
| 906 | ... DISABLED DISCOVERED |
| 907 | Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s |
| 908 | ... Validate OLT Device ENABLED ACTIVE REACHABLE |
| 909 | ... ${olt_serial_number} |
Hardik Windlass | 58b23a3 | 2022-05-10 11:06:48 +0530 | [diff] [blame] | 910 | Wait Until Keyword Succeeds ${timeout} 5s |
Hardik Windlass | 41701e8 | 2021-01-12 17:44:44 +0000 | [diff] [blame] | 911 | ... Validate ONUs for PON OLT Disable ${olt_serial_number} ${olt_peer_list} |
| 912 | # Enable the OLT PON Port back, and check ONU status are back to "ACTIVE" |
| 913 | DisableOrEnable OLT PON Port enable ${olt_device_id} ${olt_pon_port} |
Hardik Windlass | 58b23a3 | 2022-05-10 11:06:48 +0530 | [diff] [blame] | 914 | Wait Until Keyword Succeeds ${timeout} 5s |
Hardik Windlass | 41701e8 | 2021-01-12 17:44:44 +0000 | [diff] [blame] | 915 | ... Validate OLT PON Port Status ${olt_device_id} ${olt_pon_port} |
| 916 | ... ENABLED ACTIVE |
Hardik Windlass | 58b23a3 | 2022-05-10 11:06:48 +0530 | [diff] [blame] | 917 | Wait Until Keyword Succeeds ${timeout} 5s |
Hardik Windlass | 41701e8 | 2021-01-12 17:44:44 +0000 | [diff] [blame] | 918 | ... Validate ONUs for PON OLT Enable ${olt_serial_number} ${olt_peer_list} |
| 919 | END |
| 920 | |
Hardik Windlass | 16cdf96 | 2020-04-29 15:26:50 +0530 | [diff] [blame] | 921 | Validate ONUs for PON OLT Disable |
Hardik Windlass | 41701e8 | 2021-01-12 17:44:44 +0000 | [diff] [blame] | 922 | [Arguments] ${olt_sn} ${olt_peer_list} |
Hardik Windlass | 16cdf96 | 2020-04-29 15:26:50 +0530 | [diff] [blame] | 923 | [Documentation] This keyword validates that Ping fails for ONUs connected to Disabled OLT PON port |
| 924 | ... And Pings succeed for other Active OLT PON port ONUs |
| 925 | ... Also it removes subscriber for Disabled OLT PON port ONUs to replicate ATT workflow |
Hardik Windlass | 41701e8 | 2021-01-12 17:44:44 +0000 | [diff] [blame] | 926 | FOR ${I} IN RANGE 0 ${num_all_onus} |
Hardik Windlass | 16cdf96 | 2020-04-29 15:26:50 +0530 | [diff] [blame] | 927 | ${src}= Set Variable ${hosts.src[${I}]} |
| 928 | ${dst}= Set Variable ${hosts.dst[${I}]} |
Hardik Windlass | 41701e8 | 2021-01-12 17:44:44 +0000 | [diff] [blame] | 929 | Continue For Loop If "${olt_sn}"!="${src['olt']}" |
Andrea Speranza | 8b6f46f | 2022-08-23 14:22:15 +0200 | [diff] [blame] | 930 | ${onu_device_id}= Get Device ID From SN ${src['onu']} |
Hardik Windlass | 41701e8 | 2021-01-12 17:44:44 +0000 | [diff] [blame] | 931 | ${of_id}= Wait Until Keyword Succeeds ${timeout} 15s Validate OLT Device in ONOS ${src['olt']} |
Hardik Windlass | 16cdf96 | 2020-04-29 15:26:50 +0530 | [diff] [blame] | 932 | ${onu_port}= Wait Until Keyword Succeeds ${timeout} 2s Get ONU Port in ONOS ${src['onu']} |
Hardik Windlass | 1ed2eee | 2021-06-25 09:51:03 +0000 | [diff] [blame] | 933 | ... ${of_id} ${src['uni_id']} |
Hardik Windlass | 16cdf96 | 2020-04-29 15:26:50 +0530 | [diff] [blame] | 934 | ${matched}= Match ONU in PON OLT Peer List ${olt_peer_list} ${onu_device_id} |
| 935 | Run Keyword If ${matched} |
| 936 | ... Run Keywords |
| 937 | ... Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s |
| 938 | ... Validate Device ENABLED DISCOVERED |
Andrea Campanella | a9b59b4 | 2021-09-21 16:13:17 +0000 | [diff] [blame] | 939 | ... UNREACHABLE ${src['onu']} onu=True onu_reason=omci-flows-deleted |
Hardik Windlass | 58b23a3 | 2022-05-10 11:06:48 +0530 | [diff] [blame] | 940 | ... AND Wait Until Keyword Succeeds ${timeout} 2s |
Hardik Windlass | 3901567 | 2021-07-05 05:48:08 +0000 | [diff] [blame] | 941 | ... Verify UNI Port Is Disabled ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${src['onu']} ${src['uni_id']} |
Hardik Windlass | 16cdf96 | 2020-04-29 15:26:50 +0530 | [diff] [blame] | 942 | ... AND Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure |
Hardik Windlass | 58b23a3 | 2022-05-10 11:06:48 +0530 | [diff] [blame] | 943 | ... Wait Until Keyword Succeeds ${timeout} 2s |
Hardik Windlass | 16cdf96 | 2020-04-29 15:26:50 +0530 | [diff] [blame] | 944 | ... Check Ping False ${dst['dp_iface_ip_qinq']} ${src['dp_iface_name']} |
| 945 | ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} |
| 946 | ... ${src['container_name']} |
| 947 | # Remove Subscriber Access (To replicate ATT workflow) |
TorstenThieme | 4e2168e | 2021-06-22 14:01:47 +0000 | [diff] [blame] | 948 | ... AND Wait Until Keyword Succeeds ${timeout} 2s Execute ONOS CLI Command use single connection |
| 949 | ... ${ONOS_SSH_IP} ${ONOS_SSH_PORT} volt-remove-subscriber-access ${of_id} ${onu_port} |
Hardik Windlass | 223a173 | 2021-07-09 05:21:40 +0000 | [diff] [blame] | 950 | # Additional Sleep to let subscriber delete process |
| 951 | ... AND Sleep 5s |
Hardik Windlass | 16cdf96 | 2020-04-29 15:26:50 +0530 | [diff] [blame] | 952 | ... ELSE |
| 953 | ... Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure |
Hardik Windlass | 58b23a3 | 2022-05-10 11:06:48 +0530 | [diff] [blame] | 954 | ... Wait Until Keyword Succeeds ${timeout} 2s |
Hardik Windlass | 16cdf96 | 2020-04-29 15:26:50 +0530 | [diff] [blame] | 955 | ... Check Ping True ${dst['dp_iface_ip_qinq']} ${src['dp_iface_name']} |
| 956 | ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} |
| 957 | ... ${src['container_name']} |
Hardik Windlass | 16cdf96 | 2020-04-29 15:26:50 +0530 | [diff] [blame] | 958 | END |
| 959 | |
| 960 | Validate ONUs for PON OLT Enable |
Hardik Windlass | 41701e8 | 2021-01-12 17:44:44 +0000 | [diff] [blame] | 961 | [Arguments] ${olt_sn} ${olt_peer_list} |
Hardik Windlass | 16cdf96 | 2020-04-29 15:26:50 +0530 | [diff] [blame] | 962 | [Documentation] This keyword validates Ping succeeds for all Enabled/Acitve OLT PON ports |
| 963 | ... Also performs Auth/subscriberAdd/DHCP/Ping for the ONUs on Re-Enabled OLT PON port |
Suchitra Vemuri | a6879aa | 2020-11-03 11:03:11 -0800 | [diff] [blame] | 964 | FOR ${I} IN RANGE 0 ${num_all_onus} |
Hardik Windlass | 16cdf96 | 2020-04-29 15:26:50 +0530 | [diff] [blame] | 965 | ${src}= Set Variable ${hosts.src[${I}]} |
| 966 | ${dst}= Set Variable ${hosts.dst[${I}]} |
Hardik Windlass | 41701e8 | 2021-01-12 17:44:44 +0000 | [diff] [blame] | 967 | Continue For Loop If "${olt_sn}"!="${src['olt']}" |
Andrea Speranza | 8b6f46f | 2022-08-23 14:22:15 +0200 | [diff] [blame] | 968 | ${onu_device_id}= Get Device ID From SN ${src['onu']} |
Hardik Windlass | 41701e8 | 2021-01-12 17:44:44 +0000 | [diff] [blame] | 969 | ${of_id}= Wait Until Keyword Succeeds ${timeout} 15s Validate OLT Device in ONOS ${src['olt']} |
TorstenThieme | dda3765 | 2021-11-11 16:22:05 +0000 | [diff] [blame] | 970 | ${nni_port}= Wait Until Keyword Succeeds ${timeout} 2s Get NNI Port in ONOS ${of_id} |
Hardik Windlass | 16cdf96 | 2020-04-29 15:26:50 +0530 | [diff] [blame] | 971 | ${onu_port}= Wait Until Keyword Succeeds ${timeout} 2s Get ONU Port in ONOS ${src['onu']} |
Hardik Windlass | 1ed2eee | 2021-06-25 09:51:03 +0000 | [diff] [blame] | 972 | ... ${of_id} ${src['uni_id']} |
Hardik Windlass | 16cdf96 | 2020-04-29 15:26:50 +0530 | [diff] [blame] | 973 | ${matched}= Match ONU in PON OLT Peer List ${olt_peer_list} ${onu_device_id} |
| 974 | ${wpa_log}= Run Keyword If ${has_dataplane} and ${matched} Catenate SEPARATOR=. |
| 975 | ... /tmp/wpa ${src['dp_iface_name']} log |
| 976 | Run Keyword If ${matched} |
| 977 | ... Run Keywords |
| 978 | # Perform Cleanup |
| 979 | ... Run Keyword If ${has_dataplane} Clean Up Linux ${onu_device_id} |
| 980 | # Verify ONU port status |
Hardik Windlass | 58b23a3 | 2022-05-10 11:06:48 +0530 | [diff] [blame] | 981 | ... AND Wait Until Keyword Succeeds 120s 2s |
Hardik Windlass | 3901567 | 2021-07-05 05:48:08 +0000 | [diff] [blame] | 982 | ... Verify UNI Port Is Enabled ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${src['onu']} ${src['uni_id']} |
Hardik Windlass | 16cdf96 | 2020-04-29 15:26:50 +0530 | [diff] [blame] | 983 | # Verify EAPOL flows are added for the ONU port |
| 984 | ... AND Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s |
Matteo Scandolo | 7e519fb | 2021-08-13 11:35:16 -0700 | [diff] [blame] | 985 | ... Verify Eapol Flows Added For ONU ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${of_id} ${onu_port} |
Hardik Windlass | 16cdf96 | 2020-04-29 15:26:50 +0530 | [diff] [blame] | 986 | # Verify ONU state in voltha |
Hardik Windlass | 58b23a3 | 2022-05-10 11:06:48 +0530 | [diff] [blame] | 987 | ... AND Wait Until Keyword Succeeds ${timeout} 5s |
Hardik Windlass | 16cdf96 | 2020-04-29 15:26:50 +0530 | [diff] [blame] | 988 | ... Validate Device ENABLED ACTIVE REACHABLE |
| 989 | ... ${src['onu']} onu=True onu_reason=omci-flows-pushed |
| 990 | # Perform Authentication |
| 991 | ... AND Run Keyword If ${has_dataplane} |
| 992 | ... Run Keyword And Continue On Failure Validate Authentication True |
| 993 | ... ${src['dp_iface_name']} wpa_supplicant.conf ${src['ip']} ${src['user']} ${src['pass']} |
| 994 | ... ${src['container_type']} ${src['container_name']} ${wpa_log} |
Hardik Windlass | 58b23a3 | 2022-05-10 11:06:48 +0530 | [diff] [blame] | 995 | ... AND Wait Until Keyword Succeeds ${timeout} 2 |
Hardik Windlass | 16cdf96 | 2020-04-29 15:26:50 +0530 | [diff] [blame] | 996 | ... Verify ONU in AAA-Users ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${onu_port} |
Hardik Windlass | 58b23a3 | 2022-05-10 11:06:48 +0530 | [diff] [blame] | 997 | ... AND Wait Until Keyword Succeeds ${timeout} 2 |
TorstenThieme | 4e2168e | 2021-06-22 14:01:47 +0000 | [diff] [blame] | 998 | ... Execute ONOS CLI Command use single connection ${ONOS_SSH_IP} ${ONOS_SSH_PORT} |
Hardik Windlass | 16cdf96 | 2020-04-29 15:26:50 +0530 | [diff] [blame] | 999 | ... volt-add-subscriber-access ${of_id} ${onu_port} |
| 1000 | # Verify that no pending flows exist for the ONU port |
| 1001 | ... AND Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s |
| 1002 | ... Verify No Pending Flows For ONU ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${onu_port} |
| 1003 | # Verify subscriber access flows are added for the ONU port |
Hardik Windlass | 58b23a3 | 2022-05-10 11:06:48 +0530 | [diff] [blame] | 1004 | ... AND Wait Until Keyword Succeeds ${timeout} 5s |
Hardik Windlass | 16cdf96 | 2020-04-29 15:26:50 +0530 | [diff] [blame] | 1005 | ... Verify Subscriber Access Flows Added For ONU ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${of_id} |
| 1006 | ... ${onu_port} ${nni_port} ${src['c_tag']} ${src['s_tag']} |
| 1007 | ... AND Run Keyword If ${has_dataplane} |
| 1008 | ... Run Keyword And Continue On Failure Validate DHCP and Ping True |
| 1009 | ... True ${src['dp_iface_name']} ${src['s_tag']} ${src['c_tag']} ${dst['dp_iface_ip_qinq']} |
| 1010 | ... ${src['ip']} ${src['user']} ${src['pass']} |
| 1011 | ... ${src['container_type']} ${src['container_name']} |
| 1012 | ... ${dst['dp_iface_name']} ${dst['ip']} ${dst['user']} ${dst['pass']} |
| 1013 | ... ${dst['container_type']} ${dst['container_name']} |
Hardik Windlass | 58b23a3 | 2022-05-10 11:06:48 +0530 | [diff] [blame] | 1014 | ... AND Wait Until Keyword Succeeds ${timeout} 2s |
Hardik Windlass | 16cdf96 | 2020-04-29 15:26:50 +0530 | [diff] [blame] | 1015 | ... Validate Subscriber DHCP Allocation ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${onu_port} |
| 1016 | ... AND Run Keyword and Ignore Error Get Device Output from Voltha ${onu_device_id} |
| 1017 | ... ELSE |
| 1018 | ... Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure |
Hardik Windlass | 58b23a3 | 2022-05-10 11:06:48 +0530 | [diff] [blame] | 1019 | ... Wait Until Keyword Succeeds ${timeout} 2s |
Hardik Windlass | 16cdf96 | 2020-04-29 15:26:50 +0530 | [diff] [blame] | 1020 | ... Check Ping True ${dst['dp_iface_ip_qinq']} ${src['dp_iface_name']} |
| 1021 | ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} |
| 1022 | ... ${src['container_name']} |
Hardik Windlass | 16cdf96 | 2020-04-29 15:26:50 +0530 | [diff] [blame] | 1023 | END |
| 1024 | |
Hardik Windlass | 41701e8 | 2021-01-12 17:44:44 +0000 | [diff] [blame] | 1025 | Disable Enable PON Port Per OLT DT |
| 1026 | [Arguments] ${olt_serial_number} |
| 1027 | [Documentation] This keyword disables and then enables OLT PON port and |
| 1028 | ... also validate ONUs for each corresponding case |
| 1029 | ${olt_device_id}= Get OLTDeviceID From OLT List ${olt_serial_number} |
| 1030 | ${olt_pon_port_list}= Retrieve OLT PON Ports ${olt_device_id} |
| 1031 | ${olt_pon_port_list_len}= Get Length ${olt_pon_port_list} |
| 1032 | FOR ${INDEX0} IN RANGE 0 ${olt_pon_port_list_len} |
| 1033 | ${olt_pon_port}= Get From List ${olt_pon_port_list} ${INDEX0} |
| 1034 | ${olt_peer_list}= Retrieve Peer List From OLT PON Port ${olt_device_id} ${olt_pon_port} |
TorstenThieme | 17d6fd2 | 2021-09-23 10:00:08 +0000 | [diff] [blame] | 1035 | ${olt_peer_list_len}= Get Length ${olt_peer_list} |
Hardik Windlass | 41701e8 | 2021-01-12 17:44:44 +0000 | [diff] [blame] | 1036 | # Disable the OLT PON Port and Validate OLT Device |
| 1037 | DisableOrEnable OLT PON Port disable ${olt_device_id} ${olt_pon_port} |
| 1038 | Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s |
| 1039 | ... Validate OLT PON Port Status ${olt_device_id} ${olt_pon_port} |
| 1040 | ... DISABLED DISCOVERED |
| 1041 | Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s |
| 1042 | ... Validate OLT Device ENABLED ACTIVE REACHABLE |
| 1043 | ... ${olt_serial_number} |
Hardik Windlass | 5d537ad | 2021-11-16 06:01:54 +0000 | [diff] [blame] | 1044 | Wait Until Keyword Succeeds ${timeout} 5s |
Hardik Windlass | 41701e8 | 2021-01-12 17:44:44 +0000 | [diff] [blame] | 1045 | ... Validate ONUs for PON OLT Disable DT ${olt_serial_number} ${olt_peer_list} |
Hardik Windlass | 41701e8 | 2021-01-12 17:44:44 +0000 | [diff] [blame] | 1046 | # Enable the OLT PON Port back, and check ONU status are back to "ACTIVE" |
| 1047 | DisableOrEnable OLT PON Port enable ${olt_device_id} ${olt_pon_port} |
Hardik Windlass | 5d537ad | 2021-11-16 06:01:54 +0000 | [diff] [blame] | 1048 | Wait Until Keyword Succeeds ${timeout} 5s |
Hardik Windlass | 41701e8 | 2021-01-12 17:44:44 +0000 | [diff] [blame] | 1049 | ... Validate OLT PON Port Status ${olt_device_id} ${olt_pon_port} |
| 1050 | ... ENABLED ACTIVE |
TorstenThieme | 17d6fd2 | 2021-09-23 10:00:08 +0000 | [diff] [blame] | 1051 | ${olt_peer_list_new}= Wait Until Keyword Succeeds ${timeout} 5s |
| 1052 | ... Retrieve Peer List From OLT PON Port ${olt_device_id} ${olt_pon_port} ${olt_peer_list_len} |
Hardik Windlass | 5d537ad | 2021-11-16 06:01:54 +0000 | [diff] [blame] | 1053 | Wait Until Keyword Succeeds ${timeout} 5s |
Hardik Windlass | 41701e8 | 2021-01-12 17:44:44 +0000 | [diff] [blame] | 1054 | ... Validate ONUs for PON OLT Enable DT ${olt_serial_number} ${olt_peer_list_new} |
| 1055 | END |
| 1056 | |
Hardik Windlass | 16cdf96 | 2020-04-29 15:26:50 +0530 | [diff] [blame] | 1057 | Validate ONUs for PON OLT Disable DT |
Hardik Windlass | 41701e8 | 2021-01-12 17:44:44 +0000 | [diff] [blame] | 1058 | [Arguments] ${olt_sn} ${olt_peer_list} |
Hardik Windlass | 16cdf96 | 2020-04-29 15:26:50 +0530 | [diff] [blame] | 1059 | [Documentation] This keyword validates that Ping fails for ONUs connected to Disabled OLT PON port |
| 1060 | ... And Pings succeed for other Active OLT PON port ONUs |
| 1061 | ... Also it removes subscriber and deletes ONUs for Disabled OLT PON port to replicate DT workflow |
Suchitra Vemuri | a6879aa | 2020-11-03 11:03:11 -0800 | [diff] [blame] | 1062 | FOR ${I} IN RANGE 0 ${num_all_onus} |
Hardik Windlass | 16cdf96 | 2020-04-29 15:26:50 +0530 | [diff] [blame] | 1063 | ${src}= Set Variable ${hosts.src[${I}]} |
| 1064 | ${dst}= Set Variable ${hosts.dst[${I}]} |
Hardik Windlass | 41701e8 | 2021-01-12 17:44:44 +0000 | [diff] [blame] | 1065 | Continue For Loop If "${olt_sn}"!="${src['olt']}" |
Andrea Speranza | 8b6f46f | 2022-08-23 14:22:15 +0200 | [diff] [blame] | 1066 | ${onu_device_id}= Get Device ID From SN ${src['onu']} |
Hardik Windlass | 41701e8 | 2021-01-12 17:44:44 +0000 | [diff] [blame] | 1067 | ${of_id}= Wait Until Keyword Succeeds ${timeout} 15s Validate OLT Device in ONOS ${src['olt']} |
Hardik Windlass | 16cdf96 | 2020-04-29 15:26:50 +0530 | [diff] [blame] | 1068 | ${onu_port}= Wait Until Keyword Succeeds ${timeout} 2s Get ONU Port in ONOS ${src['onu']} |
Emrehan UZUN | abef518 | 2021-11-26 10:54:24 +0000 | [diff] [blame] | 1069 | ... ${of_id} ${src['uni_id']} |
Hardik Windlass | 16cdf96 | 2020-04-29 15:26:50 +0530 | [diff] [blame] | 1070 | ${matched}= Match ONU in PON OLT Peer List ${olt_peer_list} ${onu_device_id} |
Girish Gowdra | 3f0fadb | 2021-11-08 16:49:28 -0800 | [diff] [blame] | 1071 | ${valid_onu_states}= Create List stopping-openomci omci-flows-deleted |
Hardik Windlass | 16cdf96 | 2020-04-29 15:26:50 +0530 | [diff] [blame] | 1072 | Run Keyword If ${matched} |
| 1073 | ... Run Keywords |
| 1074 | ... Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s |
| 1075 | ... Validate Device ENABLED DISCOVERED |
Girish Gowdra | 3f0fadb | 2021-11-08 16:49:28 -0800 | [diff] [blame] | 1076 | ... UNREACHABLE ${src['onu']} onu=True onu_reason=${valid_onu_states} |
Hardik Windlass | 5d537ad | 2021-11-16 06:01:54 +0000 | [diff] [blame] | 1077 | ... AND Wait Until Keyword Succeeds ${timeout} 2s |
Emrehan UZUN | abef518 | 2021-11-26 10:54:24 +0000 | [diff] [blame] | 1078 | ... Verify UNI Port Is Disabled ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${src['onu']} ${src['uni_id']} |
Hardik Windlass | 16cdf96 | 2020-04-29 15:26:50 +0530 | [diff] [blame] | 1079 | ... AND Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure |
Hardik Windlass | 5d537ad | 2021-11-16 06:01:54 +0000 | [diff] [blame] | 1080 | ... Wait Until Keyword Succeeds ${timeout} 2s |
Hardik Windlass | 16cdf96 | 2020-04-29 15:26:50 +0530 | [diff] [blame] | 1081 | ... Check Ping False ${dst['dp_iface_ip_qinq']} ${src['dp_iface_name']} |
| 1082 | ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} |
| 1083 | ... ${src['container_name']} |
| 1084 | # Remove Subscriber Access (To replicate DT workflow) |
TorstenThieme | 4e2168e | 2021-06-22 14:01:47 +0000 | [diff] [blame] | 1085 | ... AND Wait Until Keyword Succeeds ${timeout} 2s Execute ONOS CLI Command use single connection |
| 1086 | ... ${ONOS_SSH_IP} ${ONOS_SSH_PORT} volt-remove-subscriber-access ${of_id} ${onu_port} |
Hardik Windlass | 16cdf96 | 2020-04-29 15:26:50 +0530 | [diff] [blame] | 1087 | # Delete ONU Device (To replicate DT workflow) |
| 1088 | ... AND Delete Device ${onu_device_id} |
Hardik Windlass | 223a173 | 2021-07-09 05:21:40 +0000 | [diff] [blame] | 1089 | # Additional Sleep to let subscriber and ONU delete process |
| 1090 | ... AND Sleep 10s |
Hardik Windlass | 16cdf96 | 2020-04-29 15:26:50 +0530 | [diff] [blame] | 1091 | ... ELSE |
| 1092 | ... Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure |
Hardik Windlass | 5d537ad | 2021-11-16 06:01:54 +0000 | [diff] [blame] | 1093 | ... Wait Until Keyword Succeeds ${timeout} 2s |
Hardik Windlass | 16cdf96 | 2020-04-29 15:26:50 +0530 | [diff] [blame] | 1094 | ... Check Ping True ${dst['dp_iface_ip_qinq']} ${src['dp_iface_name']} |
| 1095 | ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} |
| 1096 | ... ${src['container_name']} |
Hardik Windlass | 16cdf96 | 2020-04-29 15:26:50 +0530 | [diff] [blame] | 1097 | END |
| 1098 | |
| 1099 | Validate ONUs for PON OLT Enable DT |
Hardik Windlass | 41701e8 | 2021-01-12 17:44:44 +0000 | [diff] [blame] | 1100 | [Arguments] ${olt_sn} ${olt_peer_list} |
Hardik Windlass | 16cdf96 | 2020-04-29 15:26:50 +0530 | [diff] [blame] | 1101 | [Documentation] This keyword validates Ping succeeds for all Enabled/Acitve OLT PON ports |
| 1102 | ... Also performs subscriberAdd/DHCP/Ping for the ONUs on Re-Enabled OLT PON port |
Suchitra Vemuri | a6879aa | 2020-11-03 11:03:11 -0800 | [diff] [blame] | 1103 | FOR ${I} IN RANGE 0 ${num_all_onus} |
Hardik Windlass | 16cdf96 | 2020-04-29 15:26:50 +0530 | [diff] [blame] | 1104 | ${src}= Set Variable ${hosts.src[${I}]} |
| 1105 | ${dst}= Set Variable ${hosts.dst[${I}]} |
Hardik Windlass | 41701e8 | 2021-01-12 17:44:44 +0000 | [diff] [blame] | 1106 | Continue For Loop If "${olt_sn}"!="${src['olt']}" |
Andrea Speranza | 8b6f46f | 2022-08-23 14:22:15 +0200 | [diff] [blame] | 1107 | ${onu_device_id}= Get Device ID From SN ${src['onu']} |
Hardik Windlass | 41701e8 | 2021-01-12 17:44:44 +0000 | [diff] [blame] | 1108 | ${of_id}= Wait Until Keyword Succeeds ${timeout} 15s Validate OLT Device in ONOS ${src['olt']} |
TorstenThieme | dda3765 | 2021-11-11 16:22:05 +0000 | [diff] [blame] | 1109 | ${nni_port}= Wait Until Keyword Succeeds ${timeout} 2s Get NNI Port in ONOS ${of_id} |
Hardik Windlass | 16cdf96 | 2020-04-29 15:26:50 +0530 | [diff] [blame] | 1110 | ${onu_port}= Wait Until Keyword Succeeds ${timeout} 2s Get ONU Port in ONOS ${src['onu']} |
Emrehan UZUN | abef518 | 2021-11-26 10:54:24 +0000 | [diff] [blame] | 1111 | ... ${of_id} ${src['uni_id']} |
Hardik Windlass | 16cdf96 | 2020-04-29 15:26:50 +0530 | [diff] [blame] | 1112 | ${matched}= Match ONU in PON OLT Peer List ${olt_peer_list} ${onu_device_id} |
| 1113 | Run Keyword If ${matched} |
| 1114 | ... Run Keywords |
| 1115 | # Perform Cleanup |
| 1116 | ... Run Keyword If ${has_dataplane} Clean Up Linux ${onu_device_id} |
| 1117 | # Verify ONU port status |
Hardik Windlass | 5d537ad | 2021-11-16 06:01:54 +0000 | [diff] [blame] | 1118 | ... AND Wait Until Keyword Succeeds 120s 2s |
Emrehan UZUN | abef518 | 2021-11-26 10:54:24 +0000 | [diff] [blame] | 1119 | ... Verify UNI Port Is Enabled ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${src['onu']} ${src['uni_id']} |
Hardik Windlass | 5d537ad | 2021-11-16 06:01:54 +0000 | [diff] [blame] | 1120 | ... AND Wait Until Keyword Succeeds ${timeout} 2 |
TorstenThieme | 4e2168e | 2021-06-22 14:01:47 +0000 | [diff] [blame] | 1121 | ... Execute ONOS CLI Command use single connection ${ONOS_SSH_IP} ${ONOS_SSH_PORT} |
Hardik Windlass | 16cdf96 | 2020-04-29 15:26:50 +0530 | [diff] [blame] | 1122 | ... volt-add-subscriber-access ${of_id} ${onu_port} |
| 1123 | # Verify ONU state in voltha |
| 1124 | ... AND Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s |
| 1125 | ... Validate Device ENABLED ACTIVE REACHABLE |
| 1126 | ... ${src['onu']} onu=True onu_reason=omci-flows-pushed |
| 1127 | # Verify subscriber access flows are added for the ONU port |
Hardik Windlass | 5d537ad | 2021-11-16 06:01:54 +0000 | [diff] [blame] | 1128 | ... AND Wait Until Keyword Succeeds ${timeout} 5s |
Hardik Windlass | 16cdf96 | 2020-04-29 15:26:50 +0530 | [diff] [blame] | 1129 | ... Verify Subscriber Access Flows Added For ONU DT ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${of_id} |
| 1130 | ... ${onu_port} ${nni_port} ${src['s_tag']} |
| 1131 | ... AND Run Keyword If ${has_dataplane} |
| 1132 | ... Run Keyword And Continue On Failure Validate DHCP and Ping True |
| 1133 | ... True ${src['dp_iface_name']} ${src['s_tag']} ${src['c_tag']} ${dst['dp_iface_ip_qinq']} |
| 1134 | ... ${src['ip']} ${src['user']} ${src['pass']} |
| 1135 | ... ${src['container_type']} ${src['container_name']} |
| 1136 | ... ${dst['dp_iface_name']} ${dst['ip']} ${dst['user']} ${dst['pass']} |
| 1137 | ... ${dst['container_type']} ${dst['container_name']} |
| 1138 | ... ELSE |
| 1139 | ... Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure |
Hardik Windlass | 5d537ad | 2021-11-16 06:01:54 +0000 | [diff] [blame] | 1140 | ... Wait Until Keyword Succeeds ${timeout} 2s |
Hardik Windlass | 16cdf96 | 2020-04-29 15:26:50 +0530 | [diff] [blame] | 1141 | ... Check Ping True ${dst['dp_iface_ip_qinq']} ${src['dp_iface_name']} |
| 1142 | ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} |
| 1143 | ... ${src['container_name']} |
Hardik Windlass | 16cdf96 | 2020-04-29 15:26:50 +0530 | [diff] [blame] | 1144 | END |
| 1145 | |
| 1146 | Match ONU in PON OLT Peer List |
| 1147 | [Arguments] ${olt_peer_list} ${onu_device_id} |
| 1148 | [Documentation] This keyword matches if ONU device is present in OLT PON port peer list |
| 1149 | ${matched}= Set Variable False |
| 1150 | FOR ${olt_peer} IN @{olt_peer_list} |
| 1151 | ${matched}= Set Variable If '${onu_device_id}' == '${olt_peer}' True False |
| 1152 | Exit For Loop If ${matched} |
| 1153 | END |
| 1154 | [Return] ${matched} |
| 1155 | |
Gayathri.Selvan | b6a2b54 | 2020-01-24 07:24:23 +0000 | [diff] [blame] | 1156 | Collect Logs |
| 1157 | [Documentation] Collect Logs from voltha and onos cli for various commands |
| 1158 | Run Keyword and Ignore Error Get Device List from Voltha |
Suchitra Vemuri | a6879aa | 2020-11-03 11:03:11 -0800 | [diff] [blame] | 1159 | FOR ${I} IN RANGE 0 ${num_olts} |
Suchitra Vemuri | a6879aa | 2020-11-03 11:03:11 -0800 | [diff] [blame] | 1160 | Run Keyword and Ignore Error Get Device Output from Voltha ${olt_ids}[${I}][device_id] |
| 1161 | Run Keyword and Ignore Error Get Logical Device Output from Voltha ${olt_ids}[${I}][logical_id] |
| 1162 | END |
| 1163 | #Run Keyword and Ignore Error Get Device Output from Voltha ${olt_device_id} |
| 1164 | #Run Keyword and Ignore Error Get Logical Device Output from Voltha ${logical_id} |
ubuntu | 6b6e7d4 | 2020-03-02 12:35:42 -0800 | [diff] [blame] | 1165 | Get ONOS Status ${ONOS_SSH_IP} ${ONOS_SSH_PORT} |
Gayathri.Selvan | f68ea4b | 2020-02-03 07:36:39 +0000 | [diff] [blame] | 1166 | |
Hardik Windlass | b75cf1b | 2021-01-18 06:59:09 +0000 | [diff] [blame] | 1167 | Verify ping is successful except for given device |
| 1168 | [Arguments] ${num_onus} ${exceptional_onu} |
Gayathri.Selvan | f68ea4b | 2020-02-03 07:36:39 +0000 | [diff] [blame] | 1169 | [Documentation] Checks that ping for all the devices are successful except the given ONU. |
| 1170 | ${pingStatus} Set Variable True |
Suchitra Vemuri | a6879aa | 2020-11-03 11:03:11 -0800 | [diff] [blame] | 1171 | FOR ${I} IN RANGE 0 ${num_all_onus} |
Gayathri.Selvan | f68ea4b | 2020-02-03 07:36:39 +0000 | [diff] [blame] | 1172 | ${src}= Set Variable ${hosts.src[${I}]} |
| 1173 | ${dst}= Set Variable ${hosts.dst[${I}]} |
Hardik Windlass | b75cf1b | 2021-01-18 06:59:09 +0000 | [diff] [blame] | 1174 | ${pingStatus} Run Keyword If '${src['onu']}' == '${exceptional_onu}' Set Variable False |
Suchitra Vemuri | 69bcad2 | 2020-12-09 11:11:14 -0800 | [diff] [blame] | 1175 | Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure |
| 1176 | ... Wait Until Keyword Succeeds 60s 2s |
Gayathri.Selvan | f68ea4b | 2020-02-03 07:36:39 +0000 | [diff] [blame] | 1177 | ... Check Ping ${pingStatus} ${dst['dp_iface_ip_qinq']} ${src['dp_iface_name']} |
| 1178 | ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']} |
| 1179 | END |
Andy Bavier | 4a8450e | 2020-02-04 08:58:37 -0700 | [diff] [blame] | 1180 | |
Suchitra Vemuri | fe30941 | 2020-12-01 19:19:52 -0800 | [diff] [blame] | 1181 | Verify ping is successful for ONUs not on this OLT |
| 1182 | [Arguments] ${num_all_onus} ${exceptional_olt_id} |
| 1183 | [Documentation] Checks that pings work for all the ONUs except for the ONUs on the given OLT. |
| 1184 | #${pingStatus} Set Variable True |
| 1185 | FOR ${I} IN RANGE 0 ${num_all_onus} |
| 1186 | ${src}= Set Variable ${hosts.src[${I}]} |
| 1187 | ${dst}= Set Variable ${hosts.dst[${I}]} |
| 1188 | ${olt_device_id}= Get Device ID From SN ${src['olt']} |
| 1189 | Continue For Loop If "${olt_device_id}"=="${exceptional_olt_id}" |
| 1190 | #${pingStatus} Run Keyword If '${olt_device_id}' == '${exceptional_olt_id}' Set Variable False |
Suchitra Vemuri | 69bcad2 | 2020-12-09 11:11:14 -0800 | [diff] [blame] | 1191 | Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure |
| 1192 | ... Wait Until Keyword Succeeds 60s 2s |
Suchitra Vemuri | fe30941 | 2020-12-01 19:19:52 -0800 | [diff] [blame] | 1193 | ... Check Ping True ${dst['dp_iface_ip_qinq']} ${src['dp_iface_name']} |
| 1194 | ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']} |
| 1195 | END |
| 1196 | |
Andy Bavier | 1923ecc | 2020-06-18 14:06:40 -0700 | [diff] [blame] | 1197 | Echo Message to OLT Logs |
| 1198 | [Arguments] ${message} |
| 1199 | [Documentation] Echoes ${message} into the OLT logs |
Suchitra Vemuri | a6879aa | 2020-11-03 11:03:11 -0800 | [diff] [blame] | 1200 | FOR ${I} IN RANGE 0 ${num_olts} |
| 1201 | ${olt_user} Evaluate ${olts}[${I}].get("user") |
| 1202 | ${olt_pass} Evaluate ${olts}[${I}].get("pass") |
| 1203 | ${olt_ssh_ip} Evaluate ${olts}[${I}].get("sship") |
TorstenThieme | 10bddb4 | 2022-05-02 12:28:00 +0000 | [diff] [blame] | 1204 | ${olt_type} Evaluate ${olts}[${I}].get("type") |
Andrea Campanella | ebf6f0d | 2021-01-12 13:10:29 +0100 | [diff] [blame] | 1205 | Continue For Loop If "${olt_user}" == "${None}" |
| 1206 | Continue For Loop If "${olt_pass}" == "${None}" |
TorstenThieme | 10bddb4 | 2022-05-02 12:28:00 +0000 | [diff] [blame] | 1207 | ${command_timeout}= Set Variable If "${olt_type}"=="adtranolt" 300s 180s |
| 1208 | Wait Until Keyword Succeeds ${command_timeout} 10s Execute Remote Command |
Suchitra Vemuri | a6879aa | 2020-11-03 11:03:11 -0800 | [diff] [blame] | 1209 | ... printf '%s\n' '' '' '${message}' '' >> /var/log/openolt.log |
| 1210 | ... ${olt_ssh_ip} ${olt_user} ${olt_pass} |
TorstenThieme | 10bddb4 | 2022-05-02 12:28:00 +0000 | [diff] [blame] | 1211 | Wait Until Keyword Succeeds ${command_timeout} 10s Execute Remote Command |
Suchitra Vemuri | a6879aa | 2020-11-03 11:03:11 -0800 | [diff] [blame] | 1212 | ... printf '%s\n' '' '' '${message}' '' >> /var/log/dev_mgmt_daemon.log |
| 1213 | ... ${olt_ssh_ip} ${olt_user} ${olt_pass} |
TorstenThieme | 10bddb4 | 2022-05-02 12:28:00 +0000 | [diff] [blame] | 1214 | Wait Until Keyword Succeeds ${command_timeout} 10s Execute Remote Command |
Suchitra Vemuri | a6879aa | 2020-11-03 11:03:11 -0800 | [diff] [blame] | 1215 | ... printf '%s\n' '' '' '${message}' '' >> /var/log/openolt_process_watchdog.log |
| 1216 | ... ${olt_ssh_ip} ${olt_user} ${olt_pass} |
| 1217 | END |
Andy Bavier | 1923ecc | 2020-06-18 14:06:40 -0700 | [diff] [blame] | 1218 | |
Andy Bavier | abeba26 | 2020-02-07 16:22:16 -0700 | [diff] [blame] | 1219 | Start Logging |
| 1220 | [Arguments] ${label} |
| 1221 | [Documentation] Start logging for test ${label} |
Hardik Windlass | 9e3db23 | 2021-10-14 07:10:47 +0000 | [diff] [blame] | 1222 | ${kail_process}= Run Keyword If "${container_log_dir}" != "${None}" Start Process kail -n ${NAMESPACE} |
Hardik Windlass | a9a896a | 2021-11-23 04:31:51 +0000 | [diff] [blame] | 1223 | ... -n ${INFRA_NAMESPACE} cwd=${container_log_dir} stdout=${label}-combined.log |
Andy Bavier | abeba26 | 2020-02-07 16:22:16 -0700 | [diff] [blame] | 1224 | Set Test Variable ${kail_process} |
Andy Bavier | 1923ecc | 2020-06-18 14:06:40 -0700 | [diff] [blame] | 1225 | Run Keyword If ${has_dataplane} Echo Message to OLT Logs START ${label} |
Andy Bavier | abeba26 | 2020-02-07 16:22:16 -0700 | [diff] [blame] | 1226 | |
Andrea Campanella | 82add37 | 2021-11-05 12:01:15 +0100 | [diff] [blame] | 1227 | Start Logging Setup or Teardown |
| 1228 | [Arguments] ${label} |
| 1229 | [Documentation] Start logging for suite ${label} |
Matteo Scandolo | 6a90bda | 2021-11-30 11:31:38 -0800 | [diff] [blame] | 1230 | ${file}= Replace String ${label} ${SPACE} - |
Andrea Campanella | 82add37 | 2021-11-05 12:01:15 +0100 | [diff] [blame] | 1231 | ${kail_process}= Run Keyword If "${container_log_dir}" != "${None}" Start Process kail -n ${NAMESPACE} |
Matteo Scandolo | 6a90bda | 2021-11-30 11:31:38 -0800 | [diff] [blame] | 1232 | ... -n ${INFRA_NAMESPACE} cwd=${container_log_dir} stdout=${file}-combined.log |
Andrea Campanella | 82add37 | 2021-11-05 12:01:15 +0100 | [diff] [blame] | 1233 | Set Suite Variable ${kail_process} |
| 1234 | Run Keyword If ${has_dataplane} Echo Message to OLT Logs START ${label} |
| 1235 | |
| 1236 | Stop Logging Setup or Teardown |
| 1237 | [Arguments] ${label} |
| 1238 | [Documentation] End logging for suite; |
| 1239 | Run sync |
| 1240 | Run Keyword If ${kail_process} Terminate Process ${kail_process} |
| 1241 | ${test_logfile}= Run Keyword If "${container_log_dir}" != "${None}" |
| 1242 | ... Join Path ${container_log_dir} ${label}-combined.log |
| 1243 | Run Keyword If ${has_dataplane} Echo Message to OLT Logs END ${label} |
| 1244 | |
Andy Bavier | abeba26 | 2020-02-07 16:22:16 -0700 | [diff] [blame] | 1245 | Stop Logging |
| 1246 | [Arguments] ${label} |
Matteo Scandolo | da1c64b | 2021-07-20 10:14:49 -0700 | [diff] [blame] | 1247 | [Documentation] End logging for test; remove logfile if test passed and ${logging} is set to False |
Andy Bavier | abeba26 | 2020-02-07 16:22:16 -0700 | [diff] [blame] | 1248 | Run sync |
| 1249 | Run Keyword If ${kail_process} Terminate Process ${kail_process} |
| 1250 | ${test_logfile}= Run Keyword If "${container_log_dir}" != "${None}" |
| 1251 | ... Join Path ${container_log_dir} ${label}-combined.log |
Matteo Scandolo | da1c64b | 2021-07-20 10:14:49 -0700 | [diff] [blame] | 1252 | Run Keyword If Test Passed |
| 1253 | ... Run Keyword If "${logging}" == "False" |
| 1254 | ... Run Keyword If "${test_logfile}" != "${None}" |
| 1255 | ... Remove File ${test_logfile} |
Andy Bavier | 1923ecc | 2020-06-18 14:06:40 -0700 | [diff] [blame] | 1256 | Run Keyword If ${has_dataplane} Echo Message to OLT Logs END ${label} |
Andy Bavier | abeba26 | 2020-02-07 16:22:16 -0700 | [diff] [blame] | 1257 | |
Suchitra Vemuri | a5fa3dd | 2020-02-04 14:38:49 -0800 | [diff] [blame] | 1258 | Clean Up Linux |
| 1259 | [Documentation] Kill processes and clean up interfaces on src+dst servers |
Hardik Windlass | 16cdf96 | 2020-04-29 15:26:50 +0530 | [diff] [blame] | 1260 | [Arguments] ${onu_id}=${EMPTY} |
Suchitra Vemuri | a6879aa | 2020-11-03 11:03:11 -0800 | [diff] [blame] | 1261 | FOR ${I} IN RANGE 0 ${num_all_onus} |
Suchitra Vemuri | a5fa3dd | 2020-02-04 14:38:49 -0800 | [diff] [blame] | 1262 | ${src}= Set Variable ${hosts.src[${I}]} |
| 1263 | ${dst}= Set Variable ${hosts.dst[${I}]} |
Hardik Windlass | 16cdf96 | 2020-04-29 15:26:50 +0530 | [diff] [blame] | 1264 | ${onu_device_id}= Get Device ID From SN ${src['onu']} |
| 1265 | Continue For Loop If '${onu_id}' != '${EMPTY}' and '${onu_id}' != '${onu_device_id}' |
Andy Bavier | 84b8328 | 2020-06-30 05:47:49 -0700 | [diff] [blame] | 1266 | Execute Remote Command sudo pkill wpa_supplicant ${src['ip']} |
Suchitra Vemuri | a5fa3dd | 2020-02-04 14:38:49 -0800 | [diff] [blame] | 1267 | ... ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']} |
Andy Bavier | 84b8328 | 2020-06-30 05:47:49 -0700 | [diff] [blame] | 1268 | Execute Remote Command sudo pkill dhclient ${src['ip']} |
Suchitra Vemuri | a5fa3dd | 2020-02-04 14:38:49 -0800 | [diff] [blame] | 1269 | ... ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']} |
Andy Bavier | eff938d | 2020-06-29 18:27:49 -0700 | [diff] [blame] | 1270 | Execute Remote Command sudo pkill mausezahn ${src['ip']} |
| 1271 | ... ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']} |
| 1272 | Run Keyword If '${dst['ip']}' != '${None}' Execute Remote Command pkill dhcpd |
| 1273 | ... ${dst['ip']} ${dst['user']} ${dst['pass']} ${dst['container_type']} ${dst['container_name']} |
Suchitra Vemuri | a5fa3dd | 2020-02-04 14:38:49 -0800 | [diff] [blame] | 1274 | Delete IP Addresses from Interface on Remote Host ${src['dp_iface_name']} ${src['ip']} |
| 1275 | ... ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']} |
| 1276 | Run Keyword If '${dst['ip']}' != '${None}' Delete Interface on Remote Host |
| 1277 | ... ${dst['dp_iface_name']}.${src['s_tag']} ${dst['ip']} ${dst['user']} ${dst['pass']} |
| 1278 | ... ${dst['container_type']} ${dst['container_name']} |
Andy Bavier | 84b8328 | 2020-06-30 05:47:49 -0700 | [diff] [blame] | 1279 | ${bng_ip}= Get Variable Value ${dst['noroot_ip']} |
| 1280 | ${bng_user}= Get Variable Value ${dst['noroot_user']} |
| 1281 | ${bng_pass}= Get Variable Value ${dst['noroot_pass']} |
Andy Bavier | f4b7d1d | 2020-06-30 11:14:04 -0700 | [diff] [blame] | 1282 | Run Keyword If "${bng_ip}" != "${NONE}" and "${bng_user}" != "${NONE}" and "${bng_pass}" != "${NONE}" |
| 1283 | ... Execute Remote Command sudo pkill mausezahn ${bng_ip} ${bng_user} ${bng_pass} |
Andy Bavier | eff938d | 2020-06-29 18:27:49 -0700 | [diff] [blame] | 1284 | ... ${dst['container_type']} ${dst['container_name']} |
Suchitra Vemuri | a5fa3dd | 2020-02-04 14:38:49 -0800 | [diff] [blame] | 1285 | END |
Scott Baker | 60e570d | 2020-02-02 22:10:13 -0800 | [diff] [blame] | 1286 | |
Suchitra Vemuri | a6879aa | 2020-11-03 11:03:11 -0800 | [diff] [blame] | 1287 | Clean Up Linux Per OLT |
| 1288 | [Documentation] Kill processes and clean up interfaces on src+dst servers |
| 1289 | [Arguments] ${olt_serial_number} |
| 1290 | FOR ${I} IN RANGE 0 ${num_all_onus} |
| 1291 | ${src}= Set Variable ${hosts.src[${I}]} |
| 1292 | ${dst}= Set Variable ${hosts.dst[${I}]} |
| 1293 | ${onu_device_id}= Get Device ID From SN ${src['onu']} |
| 1294 | ${sn}= Get Device ID From SN ${src['olt']} |
| 1295 | #Continue For Loop If '${onu_id}' != '${EMPTY}' and '${onu_id}' != '${onu_device_id}' |
| 1296 | Continue For Loop If '${olt_serial_number}' == '${sn}' |
| 1297 | Execute Remote Command sudo pkill wpa_supplicant ${src['ip']} |
| 1298 | ... ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']} |
| 1299 | Execute Remote Command sudo pkill dhclient ${src['ip']} |
| 1300 | ... ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']} |
| 1301 | Execute Remote Command sudo pkill mausezahn ${src['ip']} |
| 1302 | ... ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']} |
| 1303 | Run Keyword If '${dst['ip']}' != '${None}' Execute Remote Command pkill dhcpd |
| 1304 | ... ${dst['ip']} ${dst['user']} ${dst['pass']} ${dst['container_type']} ${dst['container_name']} |
| 1305 | Delete IP Addresses from Interface on Remote Host ${src['dp_iface_name']} ${src['ip']} |
| 1306 | ... ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']} |
| 1307 | Run Keyword If '${dst['ip']}' != '${None}' Delete Interface on Remote Host |
| 1308 | ... ${dst['dp_iface_name']}.${src['s_tag']} ${dst['ip']} ${dst['user']} ${dst['pass']} |
| 1309 | ... ${dst['container_type']} ${dst['container_name']} |
| 1310 | ${bng_ip}= Get Variable Value ${dst['noroot_ip']} |
| 1311 | ${bng_user}= Get Variable Value ${dst['noroot_user']} |
| 1312 | ${bng_pass}= Get Variable Value ${dst['noroot_pass']} |
| 1313 | Run Keyword If "${bng_ip}" != "${NONE}" and "${bng_user}" != "${NONE}" and "${bng_pass}" != "${NONE}" |
| 1314 | ... Execute Remote Command sudo pkill mausezahn ${bng_ip} ${bng_user} ${bng_pass} |
| 1315 | ... ${dst['container_type']} ${dst['container_name']} |
| 1316 | END |
| 1317 | |
Suchitra Vemuri | 8d3b003 | 2020-09-11 17:49:08 -0700 | [diff] [blame] | 1318 | Clean dhclient |
| 1319 | [Documentation] Kills dhclient processes only for all RGs |
Hardik Windlass | 41701e8 | 2021-01-12 17:44:44 +0000 | [diff] [blame] | 1320 | FOR ${I} IN RANGE 0 ${num_all_onus} |
Suchitra Vemuri | 8d3b003 | 2020-09-11 17:49:08 -0700 | [diff] [blame] | 1321 | ${src}= Set Variable ${hosts.src[${I}]} |
| 1322 | ${dst}= Set Variable ${hosts.dst[${I}]} |
| 1323 | Execute Remote Command sudo pkill dhclient ${src['ip']} |
| 1324 | ... ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']} |
| 1325 | END |
| 1326 | |
Suchitra Vemuri | f7a033c | 2020-02-26 17:22:41 -0800 | [diff] [blame] | 1327 | Clean WPA Process |
| 1328 | [Documentation] Kills wpa_supplicant processes only for all RGs |
Suchitra Vemuri | a6879aa | 2020-11-03 11:03:11 -0800 | [diff] [blame] | 1329 | FOR ${I} IN RANGE 0 ${num_all_onus} |
Suchitra Vemuri | f7a033c | 2020-02-26 17:22:41 -0800 | [diff] [blame] | 1330 | ${src}= Set Variable ${hosts.src[${I}]} |
| 1331 | ${dst}= Set Variable ${hosts.dst[${I}]} |
| 1332 | Run Keyword And Ignore Error Kill Linux Process [w]pa_supplicant ${src['ip']} |
| 1333 | ... ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']} |
| 1334 | END |
| 1335 | |
Scott Baker | 60e570d | 2020-02-02 22:10:13 -0800 | [diff] [blame] | 1336 | Should Be Larger Than |
| 1337 | [Documentation] Verify that value_1 is > value_2 |
| 1338 | [Arguments] ${value_1} ${value_2} |
| 1339 | Run Keyword If ${value_1} <= ${value_2} |
| 1340 | ... Fail The value ${value_1} is not larger than ${value_2} |
| 1341 | |
Scott Baker | ee67555 | 2020-02-11 10:43:34 -0800 | [diff] [blame] | 1342 | Should Be Larger Than Or Equal To |
| 1343 | [Documentation] Verify that value_1 is >= value_2 |
| 1344 | [Arguments] ${value_1} ${value_2} |
| 1345 | Run Keyword If ${value_1} < ${value_2} |
| 1346 | ... Fail The value ${value_1} is not larger than or equal to ${value_2} |
| 1347 | |
Huseyin Ahmet AYDIN | 175d158 | 2021-11-23 14:51:41 +0000 | [diff] [blame] | 1348 | Should Be Lower Than |
| 1349 | [Documentation] Verify that value_1 is < value_2 |
| 1350 | [Arguments] ${value_1} ${value_2} |
| 1351 | Run Keyword If ${value_1} >= ${value_2} |
| 1352 | ... Fail The value ${value_1} is not lower than ${value_2} |
| 1353 | |
Scott Baker | 60e570d | 2020-02-02 22:10:13 -0800 | [diff] [blame] | 1354 | Should Be Float |
| 1355 | [Documentation] Verify that value is a floating point number type |
| 1356 | [Arguments] ${value} |
| 1357 | ${type} Evaluate type(${value}).__name__ |
| 1358 | Should Be Equal ${type} float |
| 1359 | |
Scott Baker | ee67555 | 2020-02-11 10:43:34 -0800 | [diff] [blame] | 1360 | Should Be Newer Than Or Equal To |
| 1361 | [Documentation] Compare two RFC3339 dates |
| 1362 | [Arguments] ${value_1} ${value_2} |
| 1363 | ${unix_v1} Parse RFC3339 ${value_1} |
| 1364 | ${unix_v2} Parse RFC3339 ${value_2} |
| 1365 | Run Keyword If ${unix_v1} < ${unix_v2} |
| 1366 | ... Fail The value ${value_1} is not newer than or equal to ${value_2} |
| 1367 | |
Scott Baker | 60e570d | 2020-02-02 22:10:13 -0800 | [diff] [blame] | 1368 | Get Current Time |
| 1369 | [Documentation] Return the current time in RFC3339 format |
| 1370 | ${output}= Run date -u +"%FT%T%:z" |
| 1371 | [return] ${output} |
Scott Baker | ee67555 | 2020-02-11 10:43:34 -0800 | [diff] [blame] | 1372 | |
| 1373 | Parse RFC3339 |
| 1374 | [Documentation] Parse an RFC3339 timestamp |
| 1375 | [Arguments] ${dateStr} |
| 1376 | ${rc} ${output}= Run and Return Rc and Output date --date="${dateStr}" "+%s" |
| 1377 | Should Be Equal As Numbers ${rc} 0 |
| 1378 | [return] ${output} |
Matteo Scandolo | 142e627 | 2020-04-29 17:36:59 -0700 | [diff] [blame] | 1379 | |
Gayathri.Selvan | 92d1686 | 2020-03-19 14:47:58 +0000 | [diff] [blame] | 1380 | Get Bandwidth Profile Name For Given Subscriber |
Hardik Windlass | 35db2aa | 2021-06-03 12:41:26 +0000 | [diff] [blame] | 1381 | [Arguments] ${subscriber_id} ${stream_type}=upstreamBandwidthProfile ${service_type}=${EMPTY} |
Gayathri.Selvan | 92d1686 | 2020-03-19 14:47:58 +0000 | [diff] [blame] | 1382 | [Documentation] Keyword to get the bandwidth details of the given subscriber |
Hardik Windlass | 35db2aa | 2021-06-03 12:41:26 +0000 | [diff] [blame] | 1383 | ${service_type_upper}= Run Keyword If '${service_type}' != '${EMPTY}' |
| 1384 | ... Convert To Upper Case ${service_type} |
| 1385 | ${bandwidth_profile_output}= Run Keyword If '${service_type}' != '${EMPTY}' |
TorstenThieme | 4e2168e | 2021-06-22 14:01:47 +0000 | [diff] [blame] | 1386 | ... Execute ONOS CLI Command use single connection ${ONOS_SSH_IP} ${ONOS_SSH_PORT} |
Hardik Windlass | 1189a64 | 2021-06-04 03:25:23 +0000 | [diff] [blame] | 1387 | ... volt-programmed-subscribers | grep ${subscriber_id} | grep '${service_type_upper}' --color=never |
Hardik Windlass | 35db2aa | 2021-06-03 12:41:26 +0000 | [diff] [blame] | 1388 | ... ELSE |
TorstenThieme | 4e2168e | 2021-06-22 14:01:47 +0000 | [diff] [blame] | 1389 | ... Execute ONOS CLI Command use single connection ${ONOS_SSH_IP} ${ONOS_SSH_PORT} |
Gayathri.Selvan | 92d1686 | 2020-03-19 14:47:58 +0000 | [diff] [blame] | 1390 | ... volt-programmed-subscribers | grep ${subscriber_id} |
| 1391 | @{bandwidth_profile_array}= Split String ${bandwidth_profile_output} , |
| 1392 | Log ${bandwidth_profile_array} |
| 1393 | FOR ${value} IN @{bandwidth_profile_array} |
| 1394 | @{row_value}= Split String ${value} = |
| 1395 | ${bandwidth_profile_name}= Set Variable If '${row_value[0]}' == ' ${stream_type}' |
| 1396 | ... ${row_value[1]} |
| 1397 | ${bandwidth_profile_name}= Convert To String ${bandwidth_profile_name} |
| 1398 | Run Keyword If "${bandwidth_profile_name}" != "None" Exit For Loop |
| 1399 | END |
| 1400 | Log ${bandwidth_profile_name} |
| 1401 | [Return] ${bandwidth_profile_name} |
| 1402 | |
| 1403 | Execute Remote Command |
| 1404 | [Documentation] SSH into a remote host and execute a command on the bare host or in a container. |
| 1405 | ... This replaces and simplifies the Login And Run Command On Remote System keyword in CORDRobot. |
| 1406 | [Arguments] ${cmd} ${ip} ${user} ${pass}=${None} |
Andy Bavier | eff938d | 2020-06-29 18:27:49 -0700 | [diff] [blame] | 1407 | ... ${container_type}=${None} ${container_name}=${None} ${timeout}=${None} |
Gayathri.Selvan | 92d1686 | 2020-03-19 14:47:58 +0000 | [diff] [blame] | 1408 | ${conn_id}= SSHLibrary.Open Connection ${ip} |
| 1409 | Run Keyword If '${pass}' != '${None}' |
| 1410 | ... SSHLibrary.Login ${user} ${pass} |
| 1411 | ... ELSE |
| 1412 | ... SSHLibrary.Login With Public Key ${user} %{HOME}/.ssh/id_rsa |
| 1413 | ${namespace}= Run Keyword If '${container_type}' == 'K8S' SSHLibrary.Execute Command |
| 1414 | ... kubectl get pods --all-namespaces | grep ${container_name} | awk '{print $1}' |
Andy Bavier | f6ab19c | 2020-05-14 10:34:47 -0700 | [diff] [blame] | 1415 | ${stdout} ${stderr} ${rc}= Run Keyword If '${container_type}' == 'LXC' |
| 1416 | ... SSHLibrary.Execute Command lxc exec ${container_name} -- ${cmd} |
Andy Bavier | eff938d | 2020-06-29 18:27:49 -0700 | [diff] [blame] | 1417 | ... return_stderr=True return_rc=True timeout=${timeout} |
Gayathri.Selvan | 92d1686 | 2020-03-19 14:47:58 +0000 | [diff] [blame] | 1418 | ... ELSE IF '${container_type}' == 'K8S' |
Andy Bavier | f6ab19c | 2020-05-14 10:34:47 -0700 | [diff] [blame] | 1419 | ... SSHLibrary.Execute Command kubectl -n ${namespace} exec ${container_name} -- ${cmd} |
Andy Bavier | eff938d | 2020-06-29 18:27:49 -0700 | [diff] [blame] | 1420 | ... return_stderr=True return_rc=True timeout=${timeout} |
Gayathri.Selvan | 92d1686 | 2020-03-19 14:47:58 +0000 | [diff] [blame] | 1421 | ... ELSE |
Andy Bavier | eff938d | 2020-06-29 18:27:49 -0700 | [diff] [blame] | 1422 | ... SSHLibrary.Execute Command ${cmd} return_stderr=True return_rc=True timeout=${timeout} |
Andy Bavier | f6ab19c | 2020-05-14 10:34:47 -0700 | [diff] [blame] | 1423 | |
| 1424 | Log ${stdout} |
| 1425 | Log ${stderr} |
| 1426 | Log ${rc} |
Gayathri.Selvan | 92d1686 | 2020-03-19 14:47:58 +0000 | [diff] [blame] | 1427 | SSHLibrary.Close Connection |
Andy Bavier | f6ab19c | 2020-05-14 10:34:47 -0700 | [diff] [blame] | 1428 | [Return] ${stdout} ${stderr} ${rc} |
Gayathri.Selvan | 92d1686 | 2020-03-19 14:47:58 +0000 | [diff] [blame] | 1429 | |
Suraj Gour | 3365127 | 2020-05-04 10:10:16 +0530 | [diff] [blame] | 1430 | Start Remote Command |
| 1431 | [Documentation] SSH into a remote host and execute a command on the bare host or in a container. |
| 1432 | ... This replaces and simplifies the Login And Run Command On Remote System keyword in CORDRobot. |
| 1433 | [Arguments] ${cmd} ${ip} ${user} ${pass}=${None} |
| 1434 | ... ${container_type}=${None} ${container_name}=${None} |
| 1435 | ${conn_id}= SSHLibrary.Open Connection ${ip} |
| 1436 | Run Keyword If '${pass}' != '${None}' |
| 1437 | ... SSHLibrary.Login ${user} ${pass} |
| 1438 | ... ELSE |
| 1439 | ... SSHLibrary.Login With Public Key ${user} %{HOME}/.ssh/id_rsa |
| 1440 | ${namespace}= Run Keyword If '${container_type}' == 'K8S' SSHLibrary.Execute Command |
| 1441 | ... kubectl get pods --all-namespaces | grep ${container_name} | awk '{print $1}' |
| 1442 | Run Keyword If '${container_type}' == 'LXC' |
| 1443 | ... SSHLibrary.Start Command lxc exec ${container_name} -- ${cmd} |
| 1444 | ... ELSE IF '${container_type}' == 'K8S' |
| 1445 | ... SSHLibrary.Start Command kubectl -n ${namespace} exec ${container_name} -- ${cmd} |
| 1446 | ... ELSE |
| 1447 | ... SSHLibrary.Start Command ${cmd} |
Andy Bavier | 9fb2323 | 2020-06-30 15:12:20 -0700 | [diff] [blame] | 1448 | # It seems that closing the connection immediately will sometimes kill the command |
| 1449 | Sleep 1s |
Suraj Gour | 3365127 | 2020-05-04 10:10:16 +0530 | [diff] [blame] | 1450 | SSHLibrary.Close Connection |
| 1451 | |
Gayathri.Selvan | 92d1686 | 2020-03-19 14:47:58 +0000 | [diff] [blame] | 1452 | Run Iperf3 Test Client |
| 1453 | [Arguments] ${src} ${server} ${args} |
| 1454 | [Documentation] Login to ${src} and run the iperf3 client against ${server} using ${args}. |
| 1455 | ... Return a Dictionary containing the results of the test. |
Girish Gowdra | d769b41 | 2021-05-16 11:09:46 -0700 | [diff] [blame] | 1456 | ${output} ${stderr} ${rc}= Execute Remote Command iperf3 -J -c ${server} ${args} -l 1024 -M 1350 | jq -M -c '.' |
Gayathri.Selvan | 92d1686 | 2020-03-19 14:47:58 +0000 | [diff] [blame] | 1457 | ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']} |
Andy Bavier | f6ab19c | 2020-05-14 10:34:47 -0700 | [diff] [blame] | 1458 | Should Be Equal As Integers ${rc} 0 |
Gayathri.Selvan | 92d1686 | 2020-03-19 14:47:58 +0000 | [diff] [blame] | 1459 | ${object}= Evaluate json.loads(r'''${output}''') json |
| 1460 | [Return] ${object} |
Hung-Wei Chiu | e0bec7c | 2020-05-29 22:16:56 +0000 | [diff] [blame] | 1461 | |
Suchitra Vemuri | 85cb7d6 | 2020-07-16 23:46:16 -0700 | [diff] [blame] | 1462 | Run Iperf Test Client for MCAST |
| 1463 | [Arguments] ${src} ${server} ${args} |
| 1464 | [Documentation] Login to ${src} and run the iperf client against ${server} using ${args}. |
| 1465 | ... Return a Dictionary containing the results of the test. |
| 1466 | ${output} ${stderr} ${rc}= Execute Remote Command sudo iperf -c ${server} ${args} | jq -M -c '.' |
| 1467 | ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']} |
| 1468 | Should Be Equal As Integers ${rc} 0 |
| 1469 | ${object}= Evaluate json.loads(r'''${output}''') json |
| 1470 | [Return] ${object} |
| 1471 | |
Hardik Windlass | d19af86 | 2021-08-12 11:40:20 +0000 | [diff] [blame] | 1472 | Run Ping In Background |
| 1473 | [Arguments] ${output_file} ${dst_ip} ${iface} ${ip} ${user} ${pass}=${None} |
| 1474 | ... ${container_type}=${None} ${container_name}=${None} |
| 1475 | [Documentation] Runs the 'ping' on remote system in background and stores the result in a file |
| 1476 | ${result}= Login And Run Command On Remote System |
Hardik Windlass | 4e0e7c1 | 2021-08-26 08:07:35 +0000 | [diff] [blame] | 1477 | ... echo "ping -I ${iface} ${dst_ip} > ${output_file} &" > ping.sh; chmod +x ping.sh; ./ping.sh |
Hardik Windlass | d19af86 | 2021-08-12 11:40:20 +0000 | [diff] [blame] | 1478 | ... ${ip} ${user} ${pass} ${container_type} ${container_name} |
| 1479 | Log ${result} |
| 1480 | |
| 1481 | Stop Ping Running In Background |
| 1482 | [Arguments] ${ip} ${user} ${pass}=${None} |
| 1483 | ... ${container_type}=${None} ${container_name}=${None} |
| 1484 | [Documentation] Stops the 'ping' running in background on remote system |
Hardik Windlass | a04efa5 | 2021-08-13 08:17:24 +0000 | [diff] [blame] | 1485 | ${cmd}= Run Keyword If '${container_type}' == 'LXC' or '${container_type}' == 'K8S' |
| 1486 | ... Set Variable kill -SIGINT `pgrep ping` |
| 1487 | ... ELSE |
| 1488 | ... Set Variable sudo kill -SIGINT `pgrep ping` |
Hardik Windlass | d19af86 | 2021-08-12 11:40:20 +0000 | [diff] [blame] | 1489 | ${result}= Login And Run Command On Remote System |
Hardik Windlass | a04efa5 | 2021-08-13 08:17:24 +0000 | [diff] [blame] | 1490 | ... ${cmd} ${ip} ${user} ${pass} ${container_type} ${container_name} |
Hardik Windlass | d19af86 | 2021-08-12 11:40:20 +0000 | [diff] [blame] | 1491 | Log ${result} |
| 1492 | |
| 1493 | Retrieve Remote File Contents |
| 1494 | [Documentation] Retrieves the contents of the file on remote system |
| 1495 | [Arguments] ${file} ${ip} ${user} ${pass}=${None} |
| 1496 | ... ${container_type}=${None} ${container_name}=${None} ${prompt}=~$ |
| 1497 | ${output}= Login And Run Command On Remote System |
| 1498 | ... cat ${file} |
| 1499 | ... ${ip} ${user} ${pass} ${container_type} ${container_name} ${prompt} |
| 1500 | [Return] ${output} |
| 1501 | |
Hung-Wei Chiu | e0bec7c | 2020-05-29 22:16:56 +0000 | [diff] [blame] | 1502 | RestoreONUs |
| 1503 | [Documentation] Restore all connected ONUs |
Suchitra Vemuri | a6879aa | 2020-11-03 11:03:11 -0800 | [diff] [blame] | 1504 | [Arguments] ${num_all_onus} |
| 1505 | FOR ${I} IN RANGE 0 ${num_all_onus} |
Hung-Wei Chiu | e0bec7c | 2020-05-29 22:16:56 +0000 | [diff] [blame] | 1506 | ${src}= Set Variable ${hosts.src[${I}]} |
Hung-Wei Chiu | cc6e655 | 2020-06-04 12:57:38 -0700 | [diff] [blame] | 1507 | ${container_type}= Get Variable Value ${src['container_type']} "null" |
| 1508 | ${container_name}= Get Variable Value ${src['container_name']} "null" |
Hung-Wei Chiu | e0bec7c | 2020-05-29 22:16:56 +0000 | [diff] [blame] | 1509 | ${onu_type}= Get Variable Value ${src['onu_type']} "null" |
Hung-Wei Chiu | cc6e655 | 2020-06-04 12:57:38 -0700 | [diff] [blame] | 1510 | #Get ens6f0 from ens6f0.22 |
| 1511 | ${if_name}= Replace String Using Regexp ${src['dp_iface_name']} \\..* \ |
Hung-Wei Chiu | e0bec7c | 2020-05-29 22:16:56 +0000 | [diff] [blame] | 1512 | Run Keyword IF '${onu_type}' == 'alpha' AlphaONURestoreDefault ${src['ip']} ${src['user']} |
Hung-Wei Chiu | cc6e655 | 2020-06-04 12:57:38 -0700 | [diff] [blame] | 1513 | ... ${src['pass']} ${if_name} admin admin ${container_type} ${container_name} |
Hung-Wei Chiu | e0bec7c | 2020-05-29 22:16:56 +0000 | [diff] [blame] | 1514 | END |
| 1515 | |
| 1516 | AlphaONURestoreDefault |
| 1517 | [Documentation] Restore the Alpha ONU to factory setting |
| 1518 | [Arguments] ${rg_ip} ${rg_user} ${rg_pass} ${onu_ifname} |
Hung-Wei Chiu | cc6e655 | 2020-06-04 12:57:38 -0700 | [diff] [blame] | 1519 | ... ${onu_user} ${onu_pass} ${container_type}=${None} ${container_name}=${None} |
Hung-Wei Chiu | e0bec7c | 2020-05-29 22:16:56 +0000 | [diff] [blame] | 1520 | ${output}= Login And Run Command On Remote System sudo ifconfig ${onu_ifname} 192.168.1.3/24 |
Hung-Wei Chiu | cc6e655 | 2020-06-04 12:57:38 -0700 | [diff] [blame] | 1521 | ... ${rg_ip} ${rg_user} ${rg_pass} ${container_type} ${container_name} |
TorstenThieme | 70bc526 | 2021-01-19 12:12:55 +0000 | [diff] [blame] | 1522 | ${cmd} Catenate |
Hung-Wei Chiu | e0bec7c | 2020-05-29 22:16:56 +0000 | [diff] [blame] | 1523 | ... (echo open "192.168.1.1"; sleep 1; |
| 1524 | ... echo "${onu_user}"; sleep 1; |
| 1525 | ... echo "${onu_pass}"; sleep 1; |
| 1526 | ... echo "restoredefault"; sleep 1) | telnet |
| 1527 | ${output}= Login And Run Command On Remote System ${cmd} |
Hung-Wei Chiu | cc6e655 | 2020-06-04 12:57:38 -0700 | [diff] [blame] | 1528 | ... ${rg_ip} ${rg_user} ${rg_pass} ${container_type} ${container_name} |
Hung-Wei Chiu | e0bec7c | 2020-05-29 22:16:56 +0000 | [diff] [blame] | 1529 | Log To Console ${output} |
| 1530 | ${output}= Login And Run Command On Remote System sudo ifconfig ${onu_ifname} 0 |
Hung-Wei Chiu | cc6e655 | 2020-06-04 12:57:38 -0700 | [diff] [blame] | 1531 | ... ${rg_ip} ${rg_user} ${rg_pass} ${container_type} ${container_name} |
Suraj Gour | 3365127 | 2020-05-04 10:10:16 +0530 | [diff] [blame] | 1532 | |
| 1533 | Create traffic with each pbit and capture at other end |
| 1534 | [Documentation] Generates upstream traffic using Mausezahn tool |
| 1535 | ... with each pbit and validates reception at other end using tcpdump |
| 1536 | [Arguments] ${target_ip} ${target_iface} ${src_iface} |
Girish Gowdra | 66cd95d | 2021-07-08 10:31:54 -0700 | [diff] [blame] | 1537 | ... ${packet_count} ${packet_type} ${c_vlan} ${s_vlan} ${direction} ${tcpdump_filter} |
Suraj Gour | 3365127 | 2020-05-04 10:10:16 +0530 | [diff] [blame] | 1538 | ... ${dst_ip} ${dst_user} ${dst_pass} ${dst_container_type} ${dst_container_name} |
| 1539 | ... ${src_ip} ${src_user} ${src_pass} ${src_container_type} ${src_container_name} |
| 1540 | FOR ${pbit} IN RANGE 8 |
Andy Bavier | eff938d | 2020-06-29 18:27:49 -0700 | [diff] [blame] | 1541 | Execute Remote Command sudo pkill mausezahn |
Suraj Gour | 3365127 | 2020-05-04 10:10:16 +0530 | [diff] [blame] | 1542 | ... ${src_ip} ${src_user} ${src_pass} ${src_container_type} ${src_container_name} |
Girish Gowdra | bbfbbc3 | 2021-05-17 14:36:58 -0700 | [diff] [blame] | 1543 | ${var1}= Set Variable sudo mausezahn ${src_iface} -B ${target_ip} -c ${packet_count} |
Girish Gowdra | 66cd95d | 2021-07-08 10:31:54 -0700 | [diff] [blame] | 1544 | ${var2}= Run Keyword If "${direction}"=="downstream" |
| 1545 | ... Set Variable -t ${packet_type} "dp=80, flags=rst, p=aa:aa:aa" -Q ${pbit}:${s_vlan},${pbit}:${c_vlan} |
| 1546 | ... ELSE |
| 1547 | ... Set Variable -t ${packet_type} "dp=80, flags=rst, p=aa:aa:aa" -Q ${pbit}:${c_vlan} |
Suraj Gour | 3365127 | 2020-05-04 10:10:16 +0530 | [diff] [blame] | 1548 | ${cmd}= Set Variable ${var1} ${var2} |
| 1549 | Start Remote Command ${cmd} ${src_ip} ${src_user} ${src_pass} |
| 1550 | ... ${src_container_type} ${src_container_name} |
| 1551 | ${output} ${stderr} ${rc}= Execute Remote Command |
Andy Bavier | eff938d | 2020-06-29 18:27:49 -0700 | [diff] [blame] | 1552 | ... sudo tcpdump -l -U -c 30 -i ${target_iface} -e ${tcpdump_filter} |
Suraj Gour | 3365127 | 2020-05-04 10:10:16 +0530 | [diff] [blame] | 1553 | ... ${dst_ip} ${dst_user} ${dst_pass} ${dst_container_type} ${dst_container_name} |
Andy Bavier | eff938d | 2020-06-29 18:27:49 -0700 | [diff] [blame] | 1554 | ... timeout=30 seconds |
| 1555 | Execute Remote Command sudo pkill mausezahn |
Suraj Gour | 3365127 | 2020-05-04 10:10:16 +0530 | [diff] [blame] | 1556 | ... ${src_ip} ${src_user} ${src_pass} ${src_container_type} ${src_container_name} |
Girish Gowdra | bbfbbc3 | 2021-05-17 14:36:58 -0700 | [diff] [blame] | 1557 | Run Keyword If "${tcpdump_filter}"=="tcp" |
Girish Gowdra | ebeca68 | 2021-05-18 14:44:41 -0700 | [diff] [blame] | 1558 | ... Should Match Regexp ${output} , p ${pbit}, |
Suraj Gour | 3365127 | 2020-05-04 10:10:16 +0530 | [diff] [blame] | 1559 | END |
TorstenThieme | 70bc526 | 2021-01-19 12:12:55 +0000 | [diff] [blame] | 1560 | |
| 1561 | Determine Number Of ONU |
| 1562 | [Arguments] ${olt_serial_number}=${EMPTY} ${num_onus}=${num_all_onus} |
| 1563 | [Documentation] Determine the number of different ONUs for the given OLT taken from host.src |
| 1564 | ${onu_list} Create List |
| 1565 | FOR ${INDEX} IN RANGE 0 ${num_onus} |
| 1566 | Continue For Loop If "${olt_serial_number}"!="${hosts.src[${INDEX}].olt}" and "${olt_serial_number}"!="${EMPTY}" |
| 1567 | ${onu_id}= Get Index From List ${onu_list} ${hosts.src[${INDEX}].onu} |
| 1568 | Run Keyword If -1 == ${onu_id} Append To List ${onu_list} ${hosts.src[${INDEX}].onu} |
| 1569 | END |
| 1570 | ${real_num_onus}= Get Length ${onu_list} |
| 1571 | [Return] ${real_num_onus} |
Hardik Windlass | 44abec1 | 2021-09-27 07:52:33 +0000 | [diff] [blame] | 1572 | |
| 1573 | Validate Cleanup In ETCD |
| 1574 | [Documentation] The keyword verifies that device, ports, flows, meters are all cleared in ETCD |
Andrea Campanella | 388cd87 | 2022-02-10 09:11:39 +0100 | [diff] [blame] | 1575 | [Arguments] ${namespace}=default ${defaultkvstoreprefix}=voltha/voltha_voltha |
Hardik Windlass | 44abec1 | 2021-09-27 07:52:33 +0000 | [diff] [blame] | 1576 | ${podname}= Set Variable etcd |
| 1577 | ${kvstoreprefix}= Get Kv Store Prefix ${defaultkvstoreprefix} |
| 1578 | # Log Devices Output and Verify Output Should be Empty |
| 1579 | ${commandget}= Catenate |
| 1580 | ... /bin/sh -c 'ETCDCTL_API=3 etcdctl get --prefix service/${kvstoreprefix}/devices --keys-only' |
| 1581 | ${result}= Exec Pod In Kube ${namespace} ${podname} ${commandget} |
| 1582 | Log ${result} |
| 1583 | Should Be Empty ${result} Stale Devices Data in Etcd! |
| 1584 | # Log Flows Output and Verify Output Should be Empty |
| 1585 | ${commandget}= Catenate |
| 1586 | ... /bin/sh -c 'ETCDCTL_API=3 etcdctl get --prefix service/${kvstoreprefix}/flows --keys-only' |
| 1587 | ${result}= Exec Pod In Kube ${namespace} ${podname} ${commandget} |
| 1588 | Log ${result} |
| 1589 | Should Be Empty ${result} Stale Flows Data in Etcd! |
| 1590 | # Log LogicalDevices Output and Verify Output Should be Empty |
| 1591 | ${commandget}= Catenate |
| 1592 | ... /bin/sh -c 'ETCDCTL_API=3 etcdctl get --prefix service/${kvstoreprefix}/logical_devices --keys-only' |
| 1593 | ${result}= Exec Pod In Kube ${namespace} ${podname} ${commandget} |
| 1594 | Log ${result} |
| 1595 | Should Be Empty ${result} Stale Logical Devices Data in Etcd! |
| 1596 | # Log LogicalFlows Output and Verify Output Should be Empty |
| 1597 | ${commandget}= Catenate |
| 1598 | ... /bin/sh -c 'ETCDCTL_API=3 etcdctl get --prefix service/${kvstoreprefix}/logical_flows --keys-only' |
| 1599 | ${result}= Exec Pod In Kube ${namespace} ${podname} ${commandget} |
| 1600 | Log ${result} |
| 1601 | Should Be Empty ${result} Stale Logical Flows Data in Etcd! |
| 1602 | # Log LogicalMeters Output and Verify Output Should be Empty |
| 1603 | ${commandget}= Catenate |
| 1604 | ... /bin/sh -c 'ETCDCTL_API=3 etcdctl get --prefix service/${kvstoreprefix}/logical_meters --keys-only' |
| 1605 | ${result}= Exec Pod In Kube ${namespace} ${podname} ${commandget} |
| 1606 | Log ${result} |
| 1607 | Should Be Empty ${result} Stale Logical Meters Data in Etcd! |
| 1608 | # Log LogicalPorts Output and Verify Output Should be Empty |
| 1609 | ${commandget}= Catenate |
| 1610 | ... /bin/sh -c 'ETCDCTL_API=3 etcdctl get --prefix service/${kvstoreprefix}/logical_ports --keys-only' |
| 1611 | ${result}= Exec Pod In Kube ${namespace} ${podname} ${commandget} |
| 1612 | Log ${result} |
| 1613 | Should Be Empty ${result} Stale Logical Ports Data in Etcd! |
| 1614 | # Log Openolt Output and Verify Output Should be Empty |
| 1615 | ${commandget}= Catenate |
| 1616 | ... /bin/sh -c 'ETCDCTL_API=3 etcdctl get --prefix service/${kvstoreprefix}/openolt --keys-only' |
| 1617 | ${result}= Exec Pod In Kube ${namespace} ${podname} ${commandget} |
| 1618 | Log ${result} |
| 1619 | Should Be Empty ${result} Stale Openolt Data in Etcd! |
| 1620 | # Log Openonu Output and Verify Output Should be Empty |
| 1621 | ${commandget}= Catenate |
| 1622 | ... /bin/sh -c 'ETCDCTL_API=3 etcdctl get --prefix service/${kvstoreprefix}/openonu --keys-only' |
| 1623 | ${result}= Exec Pod In Kube ${namespace} ${podname} ${commandget} |
| 1624 | Log ${result} |
| 1625 | Should Be Empty ${result} Stale Openonu Data in Etcd! |
| 1626 | # Log Ports Output and Verify Output Should be Empty |
| 1627 | ${commandget}= Catenate |
| 1628 | ... /bin/sh -c 'ETCDCTL_API=3 etcdctl get --prefix service/${kvstoreprefix}/ports --keys-only' |
| 1629 | ${result}= Exec Pod In Kube ${namespace} ${podname} ${commandget} |
| 1630 | Log ${result} |
| 1631 | Should Be Empty ${result} Stale Ports Data in Etcd! |
| 1632 | # Log ResourceInstances Output and Verify Output Should be Empty |
| 1633 | ${commandget}= Catenate |
| 1634 | ... /bin/sh -c 'ETCDCTL_API=3 etcdctl get --prefix service/${kvstoreprefix}/resource_instances --keys-only' |
| 1635 | ${result}= Exec Pod In Kube ${namespace} ${podname} ${commandget} |
| 1636 | Log ${result} |
| 1637 | Should Be Empty ${result} Stale Resource Instances Data in Etcd! |
| 1638 | # Log ResourceManager Output and Verify Output Should be Empty |
| 1639 | ${commandget}= Catenate |
| 1640 | ... /bin/sh -c 'ETCDCTL_API=3 etcdctl get --prefix service/${kvstoreprefix}/resource_manager --keys-only' |
| 1641 | ${result}= Exec Pod In Kube ${namespace} ${podname} ${commandget} |
| 1642 | Log ${result} |
| 1643 | Should Be Empty ${result} Stale Resource Manager Data in Etcd! |
Hardik Windlass | 8137522 | 2021-12-02 10:48:01 +0000 | [diff] [blame] | 1644 | |
Hardik Windlass | 8137522 | 2021-12-02 10:48:01 +0000 | [diff] [blame] | 1645 | Clean Up All Nodes |
| 1646 | [Documentation] Login to each node and kill all stale lxc prcoesses |
| 1647 | ${num_nodes}= Get Length ${nodes} |
| 1648 | FOR ${I} IN RANGE 0 ${num_nodes} |
| 1649 | ${node_ip}= Evaluate ${nodes}[${I}].get("ip") |
| 1650 | ${node_user}= Evaluate ${nodes}[${I}].get("user") |
| 1651 | ${node_pass}= Evaluate ${nodes}[${I}].get("pass") |
| 1652 | Run Keyword And Continue On Failure Start Remote Command kill -9 `pidof lxc` |
| 1653 | ... ${node_ip} ${node_user} ${node_pass} |
| 1654 | END |
Girish Gowdra | fc0bdf2 | 2021-12-06 16:57:50 +0530 | [diff] [blame] | 1655 | |
| 1656 | Reboot XGSPON ONU |
| 1657 | [Documentation] Reboots the XGSPON ONU and verifies the ONU state after the reboot |
| 1658 | [Arguments] ${olt_sn} ${onu_sn} ${reason} |
| 1659 | FOR ${I} IN RANGE 0 ${num_olts} |
| 1660 | ${serial_number} Evaluate ${olts}[${I}].get("serial") |
| 1661 | Continue For Loop If "${serial_number}"!="${olt_sn}" |
| 1662 | ${board_tech} Evaluate ${olts}[${I}].get("board_technology") |
| 1663 | ${onu_device_id}= Get Device ID From SN ${onu_sn} |
| 1664 | Run Keyword If "${board_tech}"=="XGS-PON" Run Keywords |
| 1665 | ... Reboot Device ${onu_device_id} |
| 1666 | ... AND Wait Until Keyword Succeeds 120s 5s |
| 1667 | ... Validate Device ENABLED ACTIVE |
| 1668 | ... REACHABLE ${onu_sn} onu=True onu_reason=${reason} |
| 1669 | END |
Girish Gowdra | 8fd9696 | 2021-12-14 16:20:04 +0530 | [diff] [blame] | 1670 | |
| 1671 | Set Non-Critical Tag for XGSPON Tech |
| 1672 | [Documentation] Dynamically sets the test tag for xgs-pon based to non-critical |
| 1673 | FOR ${I} IN RANGE 0 ${num_olts} |
| 1674 | ${board_tech} Evaluate ${olts}[${I}].get("board_technology") |
| 1675 | Run Keyword If "${board_tech}"=="XGS-PON" Run Keywords |
| 1676 | ... Set Tags non-critical |
| 1677 | ... AND Exit For Loop |
| 1678 | END |
Hardik Windlass | c4d1fd6 | 2022-04-12 13:12:28 +0000 | [diff] [blame] | 1679 | |
| 1680 | Perform Reboot ONUs and OLTs Physically |
| 1681 | [Documentation] This keyword reboots ONUs and OLTs physically |
| 1682 | ... It runs only on the PODs that are configured with PowerSwitch that |
| 1683 | ... controls the power off/on ONUs/OLT remotely (simulating a physical reboot) |
| 1684 | [Arguments] ${power_cycle_olt}=False |
| 1685 | Power Switch Connection Suite ${web_power_switch.ip} ${web_power_switch.user} ${web_power_switch.password} |
| 1686 | @{onu_list}= Create List |
| 1687 | FOR ${I} IN RANGE 0 ${num_all_onus} |
| 1688 | ${src}= Set Variable ${hosts.src[${I}]} |
| 1689 | ${dst}= Set Variable ${hosts.dst[${I}]} |
| 1690 | # If the power switch port is not specified, continue |
| 1691 | Continue For Loop If '${src["power_switch_port"]}' == '${None}' |
| 1692 | # Skip if we have already handled this ONU |
| 1693 | ${sn}= Set Variable ${src['onu']} |
| 1694 | ${onu_id}= Get Index From List ${onu_list} ${sn} |
| 1695 | Continue For Loop If -1 != ${onu_id} |
| 1696 | Append To List ${onu_list} ${sn} |
| 1697 | Disable Switch Outlet ${src['power_switch_port']} |
| 1698 | Sleep 10s |
| 1699 | Enable Switch Outlet ${src['power_switch_port']} |
| 1700 | END |
| 1701 | Pass Execution If '${power_cycle_olt}'=='False' Skipping OLT(s) Power Switch Reboot |
| 1702 | # Waiting extra time for the ONUs to come up |
| 1703 | Sleep 30s |
| 1704 | FOR ${I} IN RANGE 0 ${olt_count} |
Hardik Windlass | 2cd4365 | 2022-04-21 16:44:06 +0530 | [diff] [blame] | 1705 | ${olt_serial_number}= Get From Dictionary ${list_olts}[${I}] sn |
Hardik Windlass | c4d1fd6 | 2022-04-12 13:12:28 +0000 | [diff] [blame] | 1706 | ${power_switch_port}= Get From Dictionary ${list_olts}[${I}] powerswitchport |
| 1707 | ${olt_ssh_ip}= Get From Dictionary ${list_olts}[${I}] sship |
| 1708 | # If the power switch port is not specified, continue |
| 1709 | Continue For Loop If '${power_switch_port}' == '${None}' |
| 1710 | Disable Switch Outlet ${power_switch_port} |
| 1711 | Sleep 10s |
| 1712 | Enable Switch Outlet ${power_switch_port} |
| 1713 | Run Keyword If ${has_dataplane} Wait Until Keyword Succeeds 120s 10s |
| 1714 | ... Check Remote System Reachability True ${olt_ssh_ip} |
| 1715 | END |
| 1716 | # Waiting extra time for the ONUs to come up |
| 1717 | Sleep 60s |
Andrea Speranza | a8cf80b | 2022-05-26 10:09:59 +0200 | [diff] [blame] | 1718 | |
| 1719 | Perform Sanity Test TIM |
| 1720 | [Documentation] This keyword iterate all OLTs and performs Sanity Test Procedure for TIM workflow |
| 1721 | ... For repeating sanity test without subscriber changes set flag supress_add_subscriber=True. |
| 1722 | ... In all other (common) cases flag has to be set False (default). |
| 1723 | [Arguments] ${supress_add_subscriber}=False ${maclearning_enabled}=False |
| 1724 | FOR ${J} IN RANGE 0 ${num_olts} |
| 1725 | ${olt_serial_number}= Set Variable ${list_olts}[${J}][sn] |
| 1726 | ${num_onus}= Set Variable ${list_olts}[${J}][onucount] |
| 1727 | ${olt_device_id}= Get OLTDeviceID From OLT List ${olt_serial_number} |
| 1728 | ${of_id}= Wait Until Keyword Succeeds ${timeout} 15s Validate OLT Device in ONOS |
| 1729 | ... ${olt_serial_number} |
| 1730 | Set Global Variable ${of_id} |
Andrea Speranza | a8cf80b | 2022-05-26 10:09:59 +0200 | [diff] [blame] | 1731 | #Permorm test on flow rules that are writen inside ONOS, OLT and ONUs |
| 1732 | ${nni_port}= Wait Until Keyword Succeeds ${timeout} 2s Get NNI Port in ONOS ${of_id} |
| 1733 | Perform Sanity Test TIM Per OLT ${of_id} ${nni_port} ${olt_serial_number} ${num_onus} |
| 1734 | ... ${supress_add_subscriber} |
Andrea Speranza | a8cf80b | 2022-05-26 10:09:59 +0200 | [diff] [blame] | 1735 | #Scalability Test |
| 1736 | #Extract the total iphotetical number of UNIs that an OLT controll having multiple ONUs connected |
LupoAndreaSperanza | 0f3fbc2 | 2023-05-16 21:02:40 +0200 | [diff] [blame] | 1737 | ${num_of_provisioned_onus_ports}= Run Keyword If '${supress_add_subscriber}' == 'False' |
| 1738 | ... Count Number of UNI ports for OLT ${olt_serial_number} hsia |
| 1739 | ... ELSE Set Variable 0 |
Andrea Speranza | a8cf80b | 2022-05-26 10:09:59 +0200 | [diff] [blame] | 1740 | # Verify ONOS Flows |
Andrea Speranza | a8cf80b | 2022-05-26 10:09:59 +0200 | [diff] [blame] | 1741 | ${onos_flows_count}= Run Keyword Calculate Tim flows |
| 1742 | ... ${num_of_provisioned_onus_ports} 1 true true true true |
LupoAndreaSperanza | 0f3fbc2 | 2023-05-16 21:02:40 +0200 | [diff] [blame] | 1743 | Run Keyword If '${supress_add_subscriber}' == 'False' |
| 1744 | ... Wait Until Keyword Succeeds ${timeout} 5s |
| 1745 | ... Verify Subscriber Access Flows Added Count TIM ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${of_id} |
| 1746 | ... ${onos_flows_count} |
Andrea Speranza | a8cf80b | 2022-05-26 10:09:59 +0200 | [diff] [blame] | 1747 | # Verify VOLTHA Flows |
LupoAndreaSperanza | 0f3fbc2 | 2023-05-16 21:02:40 +0200 | [diff] [blame] | 1748 | ${olt_flows}= Run Keyword If '${supress_add_subscriber}' == 'False' |
| 1749 | ... Evaluate 6 * ${num_of_provisioned_onus_ports} + 3 |
| 1750 | ... ELSE Set Variable 3 |
Andrea Speranza | a8cf80b | 2022-05-26 10:09:59 +0200 | [diff] [blame] | 1751 | Run Keyword Wait Until Keyword Succeeds ${timeout} 5s Validate OLT Flows |
| 1752 | ... ${olt_flows} ${olt_device_id} |
| 1753 | ${List_ONU_Serial} Create List |
| 1754 | Set Suite Variable ${List_ONU_Serial} |
| 1755 | Build ONU SN List ${List_ONU_Serial} ${olt_serial_number} |
| 1756 | Log ${List_ONU_Serial} |
LupoAndreaSperanza | 0f3fbc2 | 2023-05-16 21:02:40 +0200 | [diff] [blame] | 1757 | # Number of per ONU Flows equals 6 |
| 1758 | ${onu_flows}= Run Keyword If '${supress_add_subscriber}' == 'False' |
| 1759 | ... Set Variable 6 |
| 1760 | ... ELSE Set Variable 0 |
Andrea Speranza | a8cf80b | 2022-05-26 10:09:59 +0200 | [diff] [blame] | 1761 | Wait Until Keyword Succeeds ${timeout} 5s Validate ONU Flows |
| 1762 | ... ${List_ONU_Serial} ${onu_flows} |
| 1763 | END |
| 1764 | |
| 1765 | Count Number of UNI ports for OLT |
| 1766 | [Documentation] Count Provisioned UNI ports, for ONUs connected with specified OLT |
| 1767 | [Arguments] ${olt_serial_number} ${type_of_service} |
| 1768 | ${num_of_provisioned_onus_ports}= Evaluate 0 |
| 1769 | FOR ${I} IN RANGE 0 ${num_all_onus} |
| 1770 | ${src}= Set Variable ${hosts.src[${I}]} |
| 1771 | Continue For Loop If "${olt_serial_number}"!="${src['olt']}" |
| 1772 | Continue For Loop If "${type_of_service}"!="${src['service_type']}" |
| 1773 | ${num_of_provisioned_onus_ports}= Evaluate ${num_of_provisioned_onus_ports} + 1 |
| 1774 | END |
| 1775 | [Return] ${num_of_provisioned_onus_ports} |
| 1776 | |
| 1777 | |
| 1778 | Perform Sanity Test TIM Per OLT |
| 1779 | [Arguments] ${of_id} ${nni_port} ${olt_serial_number} ${num_onus} ${supress_add_subscriber}=False |
| 1780 | [Documentation] This keyword performs Sanity Test Procedure for TIM Workflow |
| 1781 | ... Sanity test performs pppoe and flows for all the ONUs (and for each UNIs of a consider ONU) |
Andrea Speranza | a8cf80b | 2022-05-26 10:09:59 +0200 | [diff] [blame] | 1782 | Wait Until Keyword Succeeds ${timeout} 5s |
| 1783 | ... Verify Downstream Flows for Single OLT NNI Port TIM ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${of_id} |
| 1784 | ... ${nni_port} |
Andrea Speranza | a8cf80b | 2022-05-26 10:09:59 +0200 | [diff] [blame] | 1785 | FOR ${I} IN RANGE 0 ${num_all_onus} |
| 1786 | ${src}= Set Variable ${hosts.src[${I}]} |
| 1787 | ${dst}= Set Variable ${hosts.dst[${I}]} |
| 1788 | Continue For Loop If "${olt_serial_number}"!="${src['olt']}" |
Andrea Speranza | a8cf80b | 2022-05-26 10:09:59 +0200 | [diff] [blame] | 1789 | ${onu_port}= Wait Until Keyword Succeeds ${timeout} 2s |
| 1790 | ... Get ONU Port in ONOS ${src['onu']} ${of_id} ${src['uni_id']} |
Hardik Windlass | 78bb0fd | 2022-06-21 15:11:54 +0530 | [diff] [blame] | 1791 | ${onu_device_id}= Get Device ID From SN ${src['onu']} |
Andrea Speranza | a8cf80b | 2022-05-26 10:09:59 +0200 | [diff] [blame] | 1792 | # Check ONU port is Enabled in ONOS |
| 1793 | Wait Until Keyword Succeeds 120s 2s |
| 1794 | ... Verify UNI Port Is Enabled ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${src['onu']} ${src['uni_id']} |
Andrea Speranza | a8cf80b | 2022-05-26 10:09:59 +0200 | [diff] [blame] | 1795 | # Subscribe a RG on a defualt UNI_id=1 |
| 1796 | ${add_subscriber_access} = Set Variable volt-add-subscriber-access ${of_id} ${onu_port} |
| 1797 | Run Keyword If '${supress_add_subscriber}' == 'False' |
| 1798 | ... Execute ONOS CLI Command use single connection ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${add_subscriber_access} |
Andrea Speranza | a8cf80b | 2022-05-26 10:09:59 +0200 | [diff] [blame] | 1799 | # Verify ONU state in voltha |
| 1800 | ${onu_reasons}= Create List omci-flows-pushed |
LupoAndreaSperanza | 0f3fbc2 | 2023-05-16 21:02:40 +0200 | [diff] [blame] | 1801 | Run Keyword Append To List ${onu_reasons} initial-mib-downloaded |
Andrea Speranza | a8cf80b | 2022-05-26 10:09:59 +0200 | [diff] [blame] | 1802 | Wait Until Keyword Succeeds ${timeout} 5s Validate Device |
| 1803 | ... ENABLED ACTIVE REACHABLE |
| 1804 | ... ${src['onu']} onu=True onu_reason=${onu_reasons} |
LupoAndreaSperanza | 0f3fbc2 | 2023-05-16 21:02:40 +0200 | [diff] [blame] | 1805 | # Verify subscriber access flows are added for a single ONU onuport for the HSIA service |
| 1806 | Run Keyword If '${supress_add_subscriber}' == 'False' and '${src['service_type']}' == 'hsia' |
| 1807 | ... Wait Until Keyword Succeeds ${timeout} 5s |
| 1808 | ... Verify Subscriber Access Flows Added For HSIA Service Single ONU Port TIM |
| 1809 | ... ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${of_id} |
Andrea Speranza | a8cf80b | 2022-05-26 10:09:59 +0200 | [diff] [blame] | 1810 | ... ${onu_port} ${nni_port} ${src['c_tag']} ${src['uni_tag']} |
LupoAndreaSperanza | 0f3fbc2 | 2023-05-16 21:02:40 +0200 | [diff] [blame] | 1811 | # Verify subscriber access flows are added for a single ONU onuport for the VOD service |
| 1812 | Run Keyword If '${supress_add_subscriber}' == 'False' and '${src['service_type']}' == 'vod' |
| 1813 | ... Wait Until Keyword Succeeds ${timeout} 5s |
| 1814 | ... Verify Subscriber Access Flows Added For VoD Service On Single ONU Port TIM |
| 1815 | ... ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${of_id} |
| 1816 | ... ${onu_port} ${nni_port} ${src['c_tag']} ${src['uni_tag']} |
Andrea Speranza | a8cf80b | 2022-05-26 10:09:59 +0200 | [diff] [blame] | 1817 | # TO DO: Verify Meters in ONOS |
LupoAndreaSperanza | 0f3fbc2 | 2023-05-16 21:02:40 +0200 | [diff] [blame] | 1818 | END |
| 1819 | |
| 1820 | Perform Sanity Test TIM MCAST |
| 1821 | [Documentation] This keyword iterate all OLTs and performs Sanity Test Procedure for MCAST TIM workflow |
| 1822 | ... Use BBSIM to subscribe on a MCast Group and verify flows and groups rules |
| 1823 | [Arguments] ${supress_add_subscriber}=False ${maclearning_enabled}=False |
| 1824 | Perform Sanity Test TIM ${supress_add_subscriber} |
| 1825 | ... ${maclearning_enabled} |
| 1826 | FOR ${J} IN RANGE 0 ${num_olts} |
| 1827 | ${olt_serial_number}= Set Variable ${list_olts}[${J}][sn] |
| 1828 | ${num_onus}= Set Variable ${list_olts}[${J}][onucount] |
| 1829 | ${olt_device_id}= Get OLTDeviceID From OLT List ${olt_serial_number} |
| 1830 | ${of_id}= Wait Until Keyword Succeeds ${timeout} 15s Validate OLT Device in ONOS |
| 1831 | ... ${olt_serial_number} |
| 1832 | Set Global Variable ${of_id} |
| 1833 | #Permorm test on flow rules that are writen inside ONOS, OLT and ONUs |
| 1834 | ${nni_port}= Wait Until Keyword Succeeds ${timeout} 2s Get NNI Port in ONOS ${of_id} |
| 1835 | ${mCastSubIps}= Wait Until Keyword Succeeds ${timeout} 2s |
| 1836 | ... Perform Sanity Test TIM MCAST Per OLT ${of_id} ${nni_port} ${olt_serial_number} ${num_onus} |
| 1837 | ... ${supress_add_subscriber} |
| 1838 | ${number_of_mCastSubIps} Get Length ${mCastSubIps} |
| 1839 | #Scalability Test |
| 1840 | ${num_of_provisioned_onus_ports}= Run Keyword If '${supress_add_subscriber}' == 'False' |
| 1841 | ... Count Number of UNI ports for OLT ${olt_serial_number} vod |
| 1842 | ... ELSE Set Variable 0 |
| 1843 | # Verify ONOS Flows |
| 1844 | ${onos_flows_count}= Run Keyword Calculate Tim flows |
| 1845 | ... ${num_of_provisioned_onus_ports} 1 true true true true |
| 1846 | #Tot Number of Onos FLows with Mcast Downstream Flows |
| 1847 | ${onos_flows_count}= Evaluate ${number_of_mCastSubIps} + ${onos_flows_count} |
| 1848 | Run Keyword If '${supress_add_subscriber}' == 'False' |
| 1849 | ... Wait Until Keyword Succeeds ${timeout} 5s |
| 1850 | ... Verify Subscriber Access Flows Added Count TIM ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${of_id} |
| 1851 | ... ${onos_flows_count} |
| 1852 | # Verify VOLTHA Flows |
| 1853 | ${olt_flows}= Run Keyword If '${supress_add_subscriber}' == 'False' |
| 1854 | ... Evaluate 6 * ${num_of_provisioned_onus_ports} + 3 + ${number_of_mCastSubIps} |
| 1855 | ... ELSE Set Variable 4 |
| 1856 | Run Keyword Wait Until Keyword Succeeds ${timeout} 5s Validate OLT Flows |
| 1857 | ... ${olt_flows} ${olt_device_id} |
| 1858 | ${List_ONU_Serial} Create List |
| 1859 | Set Suite Variable ${List_ONU_Serial} |
| 1860 | Build ONU SN List ${List_ONU_Serial} ${olt_serial_number} |
| 1861 | Log ${List_ONU_Serial} |
| 1862 | # Number of per ONU Flows equals 6 |
| 1863 | ${onu_flows}= Run Keyword If '${supress_add_subscriber}' == 'False' |
| 1864 | ... Set Variable 6 |
| 1865 | ... ELSE Set Variable 0 |
| 1866 | Wait Until Keyword Succeeds ${timeout} 5s Validate ONU Flows |
| 1867 | ... ${List_ONU_Serial} ${onu_flows} |
| 1868 | END |
| 1869 | |
| 1870 | Perform Sanity Test TIM MCAST Per OLT |
| 1871 | [Arguments] ${of_id} ${nni_port} ${olt_serial_number} ${num_onus} ${supress_add_subscriber}=False |
| 1872 | [Documentation] This keyword performs Sanity Test Procedure for TIM Workflow |
| 1873 | ... Sanity test performs pppoe and flows for all the ONUs (and for each UNIs of a consider ONU) |
| 1874 | @{subTotalMcast}= Create List |
| 1875 | FOR ${I} IN RANGE 0 ${num_all_onus} |
| 1876 | ${src}= Set Variable ${hosts.src[${I}]} |
| 1877 | ${dst}= Set Variable ${hosts.dst[${I}]} |
| 1878 | Continue For Loop If "${olt_serial_number}"!="${src['olt']}" |
| 1879 | Continue For Loop If "${src['service_type']}"!="vod" |
| 1880 | ${subMcast}= Set Variable ${src['subMcast']} |
| 1881 | #Maintain all the MCast Group subscribed by all ONU/ONT |
| 1882 | ${subTotalMcast}= Combine Lists ${subTotalMcast} ${subMcast} |
| 1883 | ${onu_device_id}= Get Device ID From SN ${src['onu']} |
| 1884 | ${onu_port}= Wait Until Keyword Succeeds ${timeout} 2s |
| 1885 | ... Get ONU Port in ONOS ${src['onu']} ${of_id} ${src['uni_id']} |
| 1886 | Wait Until Keyword Succeeds ${timeout} 2s |
| 1887 | ... Perform Sanity Test TIM MCAST Per ONU ${NAMESPACE} |
| 1888 | ... ${olt_serial_number} ${src['onu']} ${src['uni_id']} join ${subMcast} |
| 1889 | ... ${onu_port} ${of_id} ${src['c_tag']} |
| 1890 | END |
| 1891 | ${subTotalMcast}= Remove Duplicates ${subTotalMcast} |
| 1892 | [Return] ${subTotalMcast} |
| 1893 | |
| 1894 | Perform Sanity Test TIM MCAST Per ONU |
| 1895 | [Documentation] Joins or Leaves Igmp on a BBSim ONU |
| 1896 | [Arguments] ${namespace} ${olt_serial_number} ${onu} ${uni} ${task} ${group_address_list} |
| 1897 | ... ${onu_port} ${olt_of_id} ${vlan} |
| 1898 | #Get the BBSIM, where there are the subscriber |
| 1899 | ${bbsim_pod_name}= Set Variable bbsim |
| 1900 | FOR ${J} IN RANGE 0 ${num_olts} |
| 1901 | ${bbsim_pod_name}= Set Variable If "${olt_serial_number}" == "${list_olts}[${J}][sn]" |
| 1902 | ... ${list_olts}[${J}][ip] ${bbsim_pod_name} |
| 1903 | END |
| 1904 | ${num_group_address_list} Get Length ${group_address_list} |
| 1905 | FOR ${I} IN RANGE 0 ${num_group_address_list} |
| 1906 | ${group_address}= Set Variable ${group_address_list[${I}]} |
| 1907 | JoinOrLeave Igmp ${NAMESPACE} ${bbsim_pod_name} ${onu} 0 ${task} ${group_address} ${vlan} |
| 1908 | ${downstram_flow_mcast_added}= Wait Until Keyword Succeeds ${timeout} 2s |
| 1909 | ... Verify Mcast Flow Rule Subscription ${ONOS_SSH_IP} ${ONOS_SSH_PORT} |
| 1910 | ... ${olt_of_id} ${group_address} |
| 1911 | ${groupID}= Set Variable ${EMPTY} |
| 1912 | #Get the GroupID of the Downstream Flow from the Downstream Flow Rule |
| 1913 | ${groupID}= Get Substring ${downstram_flow_mcast_added} 147 -2 |
| 1914 | #Verify if in Groups is add the correct groups rules with correct GroupID and UNI Port |
| 1915 | Verify Mcast Groups Rules generation ${ONOS_SSH_IP} ${ONOS_SSH_PORT} |
| 1916 | ... ${onu_port} ${groupID} |
Andrea Speranza | a8cf80b | 2022-05-26 10:09:59 +0200 | [diff] [blame] | 1917 | END |
Andrea Speranza | 8b6f46f | 2022-08-23 14:22:15 +0200 | [diff] [blame] | 1918 | |
| 1919 | Perform Sanity Test of BBFadapter Aggregation |
| 1920 | [Documentation] This test verfy if each OLT and ONU viewed by the BBF-Adapter |
| 1921 | ... represent the device in Voltha |
| 1922 | ... (with the correct translation to and from ietf standard) |
| 1923 | [Arguments] ${XML} ${supress_add_subscriber}=False |
| 1924 | Log ${supress_add_subscriber} |
| 1925 | #Extract from the XML of the Device Aggregation different tipe of data structure |
| 1926 | #One for only OLTs, one for only ONUs and one for Both |
| 1927 | Set Global Variable ${XML} |
Andrea Speranza | 8b6f46f | 2022-08-23 14:22:15 +0200 | [diff] [blame] | 1928 | ALL DEVICES XML update From BBF ${XML} ${scripts} |
Andrea Speranza | 8b6f46f | 2022-08-23 14:22:15 +0200 | [diff] [blame] | 1929 | OLT XML update From BBF ${XML} ${scripts} |
Andrea Speranza | 8b6f46f | 2022-08-23 14:22:15 +0200 | [diff] [blame] | 1930 | #Do the verification for each OLT and its ONUs |
| 1931 | FOR ${J} IN RANGE 0 ${num_olts} |
| 1932 | ${olt_serial_number}= Set Variable ${list_olts}[${J}][sn] |
| 1933 | ${olt_device_id}= Get OLTDeviceID From OLT List ${olt_serial_number} |
| 1934 | ${num_onus}= Set Variable ${list_olts}[${J}][onucount] |
| 1935 | ${of_id}= Wait Until Keyword Succeeds ${timeout} 15s Validate OLT Device in ONOS |
| 1936 | ... ${olt_serial_number} |
| 1937 | Set Global Variable ${of_id} ${olt_device_id} |
| 1938 | #Validate in VOLTHA if the OLT exist have the correct states |
| 1939 | Wait Until Keyword Succeeds ${timeout} 5s Validate Device |
| 1940 | ... ENABLED ACTIVE REACHABLE |
| 1941 | ... ${olt_serial_number} |
| 1942 | #Validate in BBF if the OLT exist and have the correct states |
| 1943 | #State are defined in VOLTHA but internal translate in IETF standard |
| 1944 | Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s |
| 1945 | ... Validate Olt in BBF ENABLED ACTIVE REACHABLE |
| 1946 | ... ${olt_serial_number} ${olt_device_id} |
| 1947 | #Verify if the OLT in BBF have all the features present in VOLTHA |
| 1948 | #Is like a Viceversa Check |
| 1949 | Correct representation check VOLTHA-IETF ${olt_serial_number} False |
Andrea Speranza | 8b6f46f | 2022-08-23 14:22:15 +0200 | [diff] [blame] | 1950 | #NNI_port is a place_holder for future tests on services |
| 1951 | #Do a Test for the OLT configuration and its ONUS |
| 1952 | ${nni_port}= Set Variable 0 |
| 1953 | Perform Sanity BBF Per OLT ${of_id} ${nni_port} ${olt_serial_number} ${num_onus} |
| 1954 | ... ${supress_add_subscriber} |
Andrea Speranza | 8b6f46f | 2022-08-23 14:22:15 +0200 | [diff] [blame] | 1955 | END |
| 1956 | |
| 1957 | Perform Sanity BBF Per OLT |
| 1958 | [Arguments] ${of_id} ${nni_port} ${olt_serial_number} ${num_onus} ${supress_add_subscriber} |
| 1959 | [Documentation] This keyword performs Sanity Test Procedure for BBF on Multiple Workflow |
| 1960 | ... This keyword can be used to call in any other tests where sanity check is required |
| 1961 | ... and avoids duplication of code. |
| 1962 | ... For repeating sanity test without subscriber changes set flag supress_add_subscriber=True. |
| 1963 | ... In all other (common) cases flag has to be set False (default). |
| 1964 | # Test all the ONUs of the consider OLT |
| 1965 | FOR ${I} IN RANGE 0 ${num_all_onus} |
| 1966 | ${src}= Set Variable ${hosts.src[${I}]} |
| 1967 | ${dst}= Set Variable ${hosts.dst[${I}]} |
| 1968 | Continue For Loop If "${olt_serial_number}"!="${src['olt']}" |
| 1969 | ${onu_device_id}= Get Device ID From SN in BBF ${src['onu']} |
| 1970 | ${of_id}= Get ofID From OLT List ${src['olt']} |
| 1971 | ${onu_port}= Wait Until Keyword Succeeds ${timeout} 2s Get ONU Port in ONOS ${src['onu']} |
| 1972 | ... ${of_id} ${src['uni_id']} |
| 1973 | # Subscribe the ONU if not on repete sanity check |
| 1974 | Run Keyword If '${supress_add_subscriber}' == 'False' Wait Until Keyword Succeeds ${timeout} 2s |
| 1975 | ... Execute ONOS CLI Command use single connection ${ONOS_SSH_IP} |
| 1976 | ... ${ONOS_SSH_PORT} volt-add-subscriber-access ${of_id} ${onu_port} |
| 1977 | # Verify ONU state in BBF |
| 1978 | ${onu_reasons}= Create List omci-flows-pushed |
| 1979 | #Run Keyword If ${supress_add_subscriber} Append To List ${onu_reasons} initial-mib-downloaded |
| 1980 | Log ${onu_reasons} |
| 1981 | Log ${supress_add_subscriber} |
Andrea Speranza | 8b6f46f | 2022-08-23 14:22:15 +0200 | [diff] [blame] | 1982 | ONU XML update From BBF ${XML} ${scripts} |
Andrea Speranza | 8b6f46f | 2022-08-23 14:22:15 +0200 | [diff] [blame] | 1983 | #Validate in VOLTHA if the ONU exist and have the correct states |
| 1984 | Wait Until Keyword Succeeds ${timeout} 5s Validate Device |
| 1985 | ... ENABLED ACTIVE REACHABLE |
| 1986 | ... ${src['onu']} onu=True onu_reason=${onu_reasons} |
| 1987 | #Validate in BBF if the ONU exist have the correct states |
| 1988 | #State are defined in VOLTHA but internal translate in IETF standard |
| 1989 | Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s |
| 1990 | ... Validate Onu in BBF ENABLED ACTIVE REACHABLE |
| 1991 | ... ${src['onu']} ${onu_reasons} |
| 1992 | #Verify if the ONU in BBF have all the features present in VOLTHA |
| 1993 | #Is like a Viceversa Check |
| 1994 | Correct representation check VOLTHA-IETF ${src['onu']} True |
| 1995 | END |
| 1996 | |