blob: 5af96109ff7124b44c60d30b56f3976b4f9689d5 [file] [log] [blame]
Test User01ed0642019-07-03 20:17:06 +00001#!/bin/bash
David K. Bainbridgeb7285432019-07-02 22:05:24 -07002# Copyright 2019 Ciena Corporation
3#
4# Licensed under the Apache License, Version 2.0 (the "License");
5# you may not use this file except in compliance with the License.
6# You may obtain a copy of the License at
7#
8# http://www.apache.org/licenses/LICENSE-2.0
9#
10# Unless required by applicable law or agreed to in writing, software
11# distributed under the License is distributed on an "AS IS" BASIS,
12# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
13# See the License for the specific language governing permissions and
14# limitations under the License.
David Bainbridged049a612020-03-16 17:22:54 -070015set -f
David Bainbridge712afb82019-08-14 19:55:58 +000016TOTAL_START_TIME=$(date +%s)
David K. Bainbridgeb7285432019-07-02 22:05:24 -070017
David Bainbridge38dc1e82019-08-12 15:18:45 +000018FANCY=${FANCY:-1}
19if [ "$TERM X" == " X" ]; then
20 FANCY=0
21fi
22
David K. Bainbridgeb7285432019-07-02 22:05:24 -070023# trap ctrl-c and call ctrl_c()
24trap ctrl_c INT
25
26function ctrl_c() {
David Bainbridge38dc1e82019-08-12 15:18:45 +000027 echo -en $CNORM
David K. Bainbridgeb7285432019-07-02 22:05:24 -070028 echo ""
29 echo "ctrl-c trapped"
David Bainbridgec6a6eb62019-10-18 22:50:07 +000030 echo "Thank you for trying 'voltha up'"
David K. Bainbridgeb7285432019-07-02 22:05:24 -070031 exit
32}
33
David Bainbridgea34993d2020-04-01 09:15:42 -070034HELM_VERSION=${HELM_VERSION:-v2.14.3}
David K. Bainbridgeebf38d92020-02-10 10:46:31 -080035VOLTCTL_VERSION=${VOLTCTL_VERSION:-latest}
David K. Bainbridgefe1fa8a2019-11-12 12:03:21 -080036KIND_VERSION=${KIND_VERSION:-v0.5.1}
David K. Bainbridgeb3a99372020-01-08 14:39:06 -080037VK_RELEASE=${VK_RELEASE:-master}
Test User08ebbd92019-07-03 17:15:39 +000038
David Bainbridge38dc1e82019-08-12 15:18:45 +000039BLACK=
40RED=
41GREEN=
42YELLOW=
43BLUE=
44MAGENTA=
45CYAN=
46WHITE=
47BOLD=
48NORMAL=
49ERROR=
50CEOL=
51CNORM=
52CIVIS=
53if [ $FANCY -eq 1 ]; then
54 BLACK=$(tput setaf 0)
55 RED=$(tput setaf 1)
56 GREEN=$(tput setaf 2)
57 YELLOW=$(tput setaf 3)
58 BLUE=$(tput setaf 4)
59 MAGENTA=$(tput setaf 5)
60 CYAN=$(tput setaf 6)
61 WHITE=$(tput setaf 7)
62 BOLD=$(tput bold)
63 NORMAL=$(tput sgr0)
64 ERROR="\xe2\x9c\x97\x20"
65 CEOL=$(tput el)
66 CNORM=$(tput cnorm)
67 CIVIS=$(tput civis)
68fi
Test User7d866122019-07-09 17:52:35 +000069
Test User3d7ad8e2019-07-03 06:15:44 +000070TYPE=${TYPE:-minimal}
David Bainbridge0774b232019-08-02 06:37:19 +000071NAME=${NAME:-$TYPE}
David K. Bainbridge484d80c2020-03-05 21:44:34 -080072
73ENABLE_ONOS_EXTRANEOUS_RULES=${ENABLE_ONOS_EXTRANEOUS_RULES:-no}
David Bainbridgee87067b2019-08-12 22:00:12 +000074WITH_TIMINGS=${WITH_TIMINGS:-no}
Test User7d866122019-07-09 17:52:35 +000075WITH_BBSIM=${WITH_BBSIM:-no}
David Bainbridge5b7b96b2019-07-25 20:29:13 +000076WITH_RADIUS=${WITH_RADIUS:-no}
Matteo Scandolo78dfee02020-02-13 16:18:03 -080077WITH_EAPOL=${WITH_EAPOL:-yes}
78WITH_DHCP=${WITH_DHCP:-yes}
79WITH_IGMP=${WITH_IGMP:-no}
David Bainbridgeb270c202019-07-26 01:44:42 +000080WITH_ONOS=${WITH_ONOS:-yes}
David Bainbridge99ac7a22019-08-31 02:26:43 +000081WITH_CHAOS=${WITH_CHAOS:-no}
David Bainbridge46505fb2019-10-01 21:13:20 +000082WITH_ADAPTERS=${WITH_ADAPTERS:-yes}
David K. Bainbridgeda33d652020-03-06 10:31:23 -080083WITH_SIM_ADAPTERS=${WITH_SIM_ADAPTERS:-no}
David Bainbridge46505fb2019-10-01 21:13:20 +000084WITH_OPEN_ADAPTERS=${WITH_OPEN_ADAPTERS:-yes}
David K. Bainbridge4a06a4a2020-03-02 14:15:23 -080085WITH_PORT_FORWARDS=${WITH_PORT_FORWARDS:-yes}
David Bainbridge696bc632020-04-05 21:49:37 -070086WITH_KAFKA=${WITH_KAFKA:-yes}
87WITH_ETCD=${WITH_ETCD:-yes}
David Bainbridge05cd8822019-11-19 17:43:53 +000088ONLY_ONE=${ONLY_ONE:-yes}
David K. Bainbridgeb859e912020-03-13 14:07:52 -070089CONFIG_SADIS=${CONFIG_SADIS:-no} # yes | no | file | bbsim | URL
90SADIS_SUBSCRIBERS=${SADIS_SUBSCRIBERS:-http://bbsim.voltha.svc:50074/v2/subscribers/%s}
91SADIS_BANDWIDTH_PROFILES=${SADIS_BANDWIDTH_PROFILES:-http://bbsim.voltha.svc:50074/v2/bandwidthprofiles/%s}
Hardik Windlassb3147602020-03-09 16:59:15 +053092SADIS_CFG=${SADIS_CFG:-onos-files/onos-sadis-sample.json}
David Bainbridge27790d62019-08-13 22:43:19 +000093INSTALL_ONOS_APPS=${INSTALL_ONOS_APPS:-no}
Test Userba1e7e72019-07-10 22:27:54 +000094JUST_K8S=${JUST_K8S:-no}
95DEPLOY_K8S=${DEPLOY_K8S:-yes}
David K. Bainbridge0e89cb92019-07-17 11:30:10 -070096INSTALL_KUBECTL=${INSTALL_KUBECTL:-yes}
97INSTALL_HELM=${INSTALL_HELM:-yes}
David Bainbridge46505fb2019-10-01 21:13:20 +000098UPDATE_HELM_REPOS=${UPDATE_HELM_REPOS:-yes}
Matteo Scandolofab98622020-01-28 15:17:20 -080099WAIT_ON_DOWN=${WAIT_ON_DOWN:-yes}
David Bainbridge52e6e9d2020-03-23 13:48:27 -0700100WAIT_TIMEOUT=${WAIT_TIMEOUT:-30m}
101VOLTHA_DOWN_ON_TIMEOUT=${VOLTHA_DOWN_ON_TIMEOUT:-no}
David Bainbridge5b7b96b2019-07-25 20:29:13 +0000102VOLTHA_LOG_LEVEL=${VOLTHA_LOG_LEVEL:-WARN}
David Bainbridge90fd8e32019-08-21 23:32:47 +0000103VOLTHA_CHART=${VOLTHA_CHART:-onf/voltha}
104VOLTHA_CHART_VERSION=${VOLTHA_CHART_VERSION:-latest}
105VOLTHA_BBSIM_CHART=${VOLTHA_BBSIM_CHART:-onf/bbsim}
Matteo Scandolodcd29f52019-10-07 15:42:42 -0700106VOLTHA_BBSIM_CHART_VERSION=${VOLTHA_BBSIM_CHART_VERSION:-latest}
David Bainbridgee10f6d52019-07-25 00:28:13 +0000107VOLTHA_ADAPTER_SIM_CHART=${VOLTHA_ADAPTER_SIM_CHART:-onf/voltha-adapter-simulated}
David Bainbridge90fd8e32019-08-21 23:32:47 +0000108VOLTHA_ADAPTER_SIM_CHART_VERSION=${VOLTHA_ADAPTER_SIM_CHART_VERSION:-latest}
David Bainbridgee10f6d52019-07-25 00:28:13 +0000109VOLTHA_ADAPTER_OPEN_OLT_CHART=${VOLTHA_ADAPTER_OPEN_OLT_CHART:-onf/voltha-adapter-openolt}
David Bainbridge90fd8e32019-08-21 23:32:47 +0000110VOLTHA_ADAPTER_OPEN_OLT_CHART_VERSION=${VOLTHA_ADAPTER_OPEN_OLT_CHART_VERSION:-latest}
David Bainbridgee10f6d52019-07-25 00:28:13 +0000111VOLTHA_ADAPTER_OPEN_ONU_CHART=${VOLTHA_ADAPTER_OPEN_ONU_CHART:-onf/voltha-adapter-openonu}
David Bainbridge90fd8e32019-08-21 23:32:47 +0000112VOLTHA_ADAPTER_OPEN_ONU_CHART_VERSION=${VOLTHA_ADAPTER_OPEN_ONU_CHART_VERSION:-latest}
David K. Bainbridgeda33d652020-03-06 10:31:23 -0800113ONOS_CHART=${ONOS_CHART:-onf/onos}
Andrea Campanella21323292019-12-18 11:44:19 -0800114ONOS_CHART_VERSION=${ONOS_CHART_VERSION:-latest}
David Bainbridge2eaf2cf2020-03-18 12:54:08 -0700115EXTRA_HELM_INSTALL_ARGS=${EXTRA_HELM_INSTALL_ARGS:-}
116INTERNAL_EXTRA_HELM_INSTALL_ARGS=
uottrembb16d3982020-02-28 08:34:36 +0100117NUM_OF_BBSIM=${NUM_OF_BBSIM:-1}
118MAX_NUM_OF_BBSIM=10
Test Userba1e7e72019-07-10 22:27:54 +0000119
120HAVE_GO=$(which go >/dev/null 2>&1 && echo "yes" || echo "no")
121HOSTOS=$(uname -s | tr "[:upper:]" "[:lower:"])
122HOSTARCH=$(uname -m | tr "[:upper:]" "[:lower:"])
123if [ $HOSTARCH == "x86_64" ]; then
124 HOSTARCH="amd64"
125fi
Test User7d866122019-07-09 17:52:35 +0000126
uottrembb16d3982020-02-28 08:34:36 +0100127# check number (range) of bbsim, max bbsim must not exceed 10 instances!
128# note: instances will be numbered from 0 to 9
129if [ "$1" == "up" ]; then
David K. Bainbridge43422402020-03-06 07:41:22 -0800130 if [ "$NUM_OF_BBSIM" -lt 1 ]; then
131 >&2 echo -e "${RED}${BOLD}${ERROR}ERROR:${NORMAL}${RED} Invalid setting of BBSIM instances. NUM_OF_BBSIM is less than 1${NORMAL}"
132 exit 1
133 fi
134 if [ "$NUM_OF_BBSIM" -gt $MAX_NUM_OF_BBSIM ]; then
135 >&2 echo -e "${RED}${BOLD}${ERROR}ERROR:${NORMAL}${RED} Invalid setting of BBSIM instances. NUM_OF_BBSIM is greater than $MAX_NUM_OF_BBSIM${NORMAL}"
136 exit 1
137 fi
uottrembb16d3982020-02-28 08:34:36 +0100138fi
Test User7d866122019-07-09 17:52:35 +0000139# Verify TYPE setting
140if [ $(echo ":minimal:full:" | grep -ic ":$TYPE:") -eq 0 ]; then
David K. Bainbridge0e89cb92019-07-17 11:30:10 -0700141 >&2 echo -e "${RED}${BOLD}${ERROR}ERROR:${NORMAL}${RED} Invalid \$TYPE value of '$TYPE'. Should be 'minimal' or 'full'${NORMAL}"
Test User7d866122019-07-09 17:52:35 +0000142 exit 1
143fi
144
David Bainbridge52e6e9d2020-03-23 13:48:27 -0700145function parseDuration() {
146 local DUR=$1
147 local RESULT=0
David Bainbridge6cdb6462020-03-25 10:24:38 -0700148 local TERMS=$(echo $DUR | sed -Ee 's/([sSmMhHdD])/\1 /g' -e 's/,$//g')
David Bainbridge52e6e9d2020-03-23 13:48:27 -0700149 for TERM in $TERMS; do
David Bainbridge6cdb6462020-03-25 10:24:38 -0700150 local VALUE=$(echo $TERM | sed -Ee 's/([0-9]+)[sSmMhHdD]/\1/')
151 local UNIT=$(echo $TERM | sed -Ee 's/[0-9]+([sSmMhHdD])/\1/')
David Bainbridge52e6e9d2020-03-23 13:48:27 -0700152 case $UNIT in
153 s|S)
154 RESULT=$(($RESULT + $VALUE)) ;;
155 m|M)
156 RESULT=$(($RESULT + ($VALUE * 60))) ;;
157 h|H)
158 RESULT=$(($RESULT + ($VALUE * 3600))) ;;
159 d|D)
160 RESULT=$(($RESULT + ($VALUE * 86400))) ;;
161 *) ;;
162 esac
163 done
164 echo $RESULT
165}
166
167function doTimeout() {
168 local MSG=$1
169 2>&1 echo -e "\n${RED}${BOLD}${ERROR}TIMEOUT:${NORMAL}${RED} Operation timed out after '$WAIT_TIMEOUT': $MSG"
170 exit 125
171}
172
David K. Bainbridge4a06a4a2020-03-02 14:15:23 -0800173function get_service_ep() {
174 local NS=$1
175 local NAME=$2
176 kubectl -n $NS get service $NAME -o json | jq -r '.spec.clusterIP + ":" + (.spec.ports[0].port|tostring)'
177}
178
David Bainbridge2a0b8a42019-08-16 17:39:29 +0000179# Used to verify configuration values are set to "yes" or "no" value or convert
180# equivalents to "yes" or "no"
181function verify_yes_no() {
182 local VAR=$1
183 local VAL=$(eval echo \$$VAR)
184 if [ $(echo ":y:yes:true:n:no:false:1:0:" | grep -ic ":$VAL:") -eq 0 ]; then
185 >&2 echo -e "${RED}${BOLD}${ERROR}ERROR:${NORMAL}${RED} Invalid '$VAR' value of '$VAL'. Should be 'yes' or 'no'${NORMAL}"
186 echo "INVALID"
187 return 1
188 fi
189 if [ $(echo ":y:yes:true:1:" | grep -ic ":$VAL:") -eq 1 ]; then
190 echo "yes"
191 else
192 echo "no"
193 fi
194 return 0
195}
Test User7d866122019-07-09 17:52:35 +0000196
David Bainbridge2a0b8a42019-08-16 17:39:29 +0000197ALL_YES_NO="\
David K. Bainbridge484d80c2020-03-05 21:44:34 -0800198 ENABLE_ONOS_EXTRANEOUS_RULES \
David Bainbridge2a0b8a42019-08-16 17:39:29 +0000199 WITH_TIMINGS \
200 WITH_BBSIM \
Matteo Scandolo78dfee02020-02-13 16:18:03 -0800201 WITH_EAPOL \
202 WITH_DHCP \
203 WITH_IGMP \
David Bainbridge2a0b8a42019-08-16 17:39:29 +0000204 WITH_ONOS \
David Bainbridge99ac7a22019-08-31 02:26:43 +0000205 WITH_CHAOS \
David Bainbridge46505fb2019-10-01 21:13:20 +0000206 WITH_ADAPTERS \
207 WITH_SIM_ADAPTERS \
208 WITH_OPEN_ADAPTERS \
David K. Bainbridge4a06a4a2020-03-02 14:15:23 -0800209 WITH_PORT_FORWARDS \
David Bainbridge2a0b8a42019-08-16 17:39:29 +0000210 JUST_K8S \
211 DEPLOY_K8S \
212 INSTALL_ONOS_APPS \
David Bainbridge2a0b8a42019-08-16 17:39:29 +0000213 INSTALL_KUBECTL \
214 INSTALL_HELM \
David Bainbridge46505fb2019-10-01 21:13:20 +0000215 UPDATE_HELM_REPOS \
David Bainbridge4f1b5562019-08-19 04:46:52 +0000216 WAIT_ON_DOWN \
David Bainbridge70c0ea82019-11-14 23:25:26 +0000217 ONLY_ONE \
David Bainbridge52e6e9d2020-03-23 13:48:27 -0700218 VOLTHA_DOWN_ON_TIMEOUT \
David Bainbridge2a0b8a42019-08-16 17:39:29 +0000219 "
David Bainbridge5b7b96b2019-07-25 20:29:13 +0000220
David Bainbridge2a0b8a42019-08-16 17:39:29 +0000221ALL_OPTIONS="\
222 NAME \
223 TYPE \
224 $ALL_YES_NO \
David Bainbridge52e6e9d2020-03-23 13:48:27 -0700225 WAIT_TIMEOUT \
David Bainbridge2a0b8a42019-08-16 17:39:29 +0000226 VOLTHA_LOG_LEVEL \
227 VOLTHA_CHART \
David Bainbridge90fd8e32019-08-21 23:32:47 +0000228 VOLTHA_CHART_VERSION \
229 VOLTHA_BBSIM_CHART \
230 VOLTHA_BBSIM_CHART_VERSION \
uottrembd5a20572020-03-06 09:15:01 +0100231 NUM_OF_BBSIM \
David Bainbridge2a0b8a42019-08-16 17:39:29 +0000232 VOLTHA_ADAPTER_SIM_CHART \
David Bainbridge90fd8e32019-08-21 23:32:47 +0000233 VOLTHA_ADAPTER_SIM_CHART_VERSION \
David Bainbridge2a0b8a42019-08-16 17:39:29 +0000234 VOLTHA_ADAPTER_OPEN_OLT_CHART \
David Bainbridge90fd8e32019-08-21 23:32:47 +0000235 VOLTHA_ADAPTER_OPEN_OLT_CHART_VERSION \
David Bainbridge2a0b8a42019-08-16 17:39:29 +0000236 VOLTHA_ADAPTER_OPEN_ONU_CHART \
David Bainbridge90fd8e32019-08-21 23:32:47 +0000237 VOLTHA_ADAPTER_OPEN_ONU_CHART_VERSION \
David K. Bainbridgeda33d652020-03-06 10:31:23 -0800238 ONOS_CHART \
Andrea Campanella21323292019-12-18 11:44:19 -0800239 ONOS_CHART_VERSION \
David Bainbridge2a0b8a42019-08-16 17:39:29 +0000240 ONOS_API_PORT \
241 ONOS_SSH_PORT \
David K. Bainbridgeb859e912020-03-13 14:07:52 -0700242 CONFIG_SADIS \
Hardik Windlassb3147602020-03-09 16:59:15 +0530243 SADIS_CFG \
David Bainbridge2a0b8a42019-08-16 17:39:29 +0000244 VOLTHA_API_PORT \
245 VOLTHA_SSH_PORT \
246 VOLTHA_ETCD_PORT \
David K. Bainbridge00ecd382020-02-28 12:31:58 -0800247 VOLTHA_KAFKA_PORT \
David K. Bainbridge8f7f30b2020-01-08 13:06:16 -0800248 VK_RELEASE \
249 KIND_VERSION \
250 VOLTCTL_VERSION \
David Bainbridgea34993d2020-04-01 09:15:42 -0700251 HELM_VERSION \
David Bainbridge696bc632020-04-05 21:49:37 -0700252 WITH_RADIUS \
253 WITH_KAFKA \
254 WITH_ETCD \
David Bainbridge2a0b8a42019-08-16 17:39:29 +0000255 "
David Bainbridge01294952019-07-30 19:33:45 +0000256
David Bainbridge2a0b8a42019-08-16 17:39:29 +0000257# Iterate over yes/no configuration options and validate
258for VAR in $ALL_YES_NO; do
259 eval $VAR=$(verify_yes_no $VAR)
260 if [ "$(eval echo \$$VAR)" == "INVALID" ]; then
261 exit 1;
262 fi
263done
David Bainbridgeb270c202019-07-26 01:44:42 +0000264
David Bainbridge15f6f232020-03-30 09:15:43 -0700265# Special case for CONFIG_SADIS
266if [ $(echo ":y:yes:true:1:" | grep -ic ":$CONFIG_SADIS:") -eq 1 ]; then
267 CONFIG_SADIS="yes"
268fi
269if [ $(echo ":n:no:false:0:" | grep -ic ":$CONFIG_SADIS:") -eq 1 ]; then
270 CONFIG_SADIS="no"
271fi
272
David Bainbridge696bc632020-04-05 21:49:37 -0700273# Special case for WITH_KAFKA and WITH_ETCD
274if [ $(echo ":y:yes:true:1:" | grep -ic ":$WITH_KAFKA:") -eq 1 ]; then
275 WITH_KAFKA="yes"
276fi
277if [ $(echo ":n:no:false:0:" | grep -ic ":$WITH_KAFKA:") -eq 1 ]; then
278 WITH_KAFKA="no"
279fi
280if [ $(echo ":y:yes:true:1:" | grep -ic ":$WITH_ETCD:") -eq 1 ]; then
281 WITH_ETCD="yes"
282fi
283if [ $(echo ":n:no:false:0:" | grep -ic ":$WITH_ETCD:") -eq 1 ]; then
284 WITH_ETCD="no"
285fi
David Bainbridge29c31cb2020-04-06 09:45:50 -0700286if [ $(echo ":y:yes:true:1:" | grep -ic ":$WITH_RADIUS:") -eq 1 ]; then
287 WITH_RADIUS="yes"
288fi
289if [ $(echo ":n:no:false:0:" | grep -ic ":$WITH_RADIUS:") -eq 1 ]; then
290 WITH_RADIUS="no"
291fi
David Bainbridge696bc632020-04-05 21:49:37 -0700292
David K. Bainbridgeda33d652020-03-06 10:31:23 -0800293# Check for prerequiste tools
David K. Bainbridge726ff6a2020-03-06 11:09:50 -0800294TOOLS="curl sed jq"
David K. Bainbridgeda33d652020-03-06 10:31:23 -0800295if [ $DEPLOY_K8S == "yes" ]; then
296 TOOLS+=" docker"
297fi
298NOT_FOUND=""
299for T in $TOOLS; do
300 if [ -z "$(which $T)" ]; then
301 NOT_FOUND+=" $T"
302 fi
303done
304
305if [ ! -z "$NOT_FOUND" ]; then
306 >&2 echo -e "${RED}${BOLD}${ERROR}ERROR:${NORMAL}${RED} The following required tools where not found, please install them:$NOT_FOUND"
307 exit 1
308fi
309
David Bainbridge52e6e9d2020-03-23 13:48:27 -0700310TIMEOUT_SECONDS=$(parseDuration $WAIT_TIMEOUT)
311
David Bainbridge0774b232019-08-02 06:37:19 +0000312mkdir -p .voltha
313touch .voltha/ports
314HAVE=$(grep $NAME .voltha/ports)
315if [ "$HAVE X" == " X" ]; then
316 # Find free port prefix
317 START=81
318 while true; do
319 if [ $(grep -c $START .voltha/ports) -eq 0 ]; then
320 break
321 fi
322 START=$(expr $START + 1)
323 done
324 DELTA=$(expr $START - 81)
David Bainbridgea2595422019-10-22 03:54:28 +0000325 ONOS_API_PORT=${ONOS_API_PORT:-${START}81}
326 ONOS_SSH_PORT=${ONOS_SSH_PORT:-${START}01}
327 VOLTHA_API_PORT=${VOLTHA_API_PORT:-5$(expr 55 + $DELTA)55}
328 VOLTHA_SSH_PORT=${VOLTHA_SSH_PORT:-$(expr 50 + $DELTA)22}
329 VOLTHA_ETCD_PORT=${VOLTHA_ETCD_PORT:-$(expr 23 + $DELTA)79}
David K. Bainbridge00ecd382020-02-28 12:31:58 -0800330 VOLTHA_KAFKA_PORT=${VOLTHA_KAFKA_PORT:-$(expr 90 + $DELTA)92}
Test User01ed0642019-07-03 20:17:06 +0000331else
David Bainbridge0774b232019-08-02 06:37:19 +0000332 VALUES=$(echo $HAVE | sed -e 's/\s//g' | cut -d= -f2)
David Bainbridgea2595422019-10-22 03:54:28 +0000333 ONOS_API_PORT=${ONOS_API_PORT:-$(echo $VALUES | cut -d, -f1)}
334 ONOS_SSH_PORT=${ONOS_SSH_PORT:-$(echo $VALUES | cut -d, -f2)}
335 VOLTHA_API_PORT=${VOLTHA_API_PORT:-$(echo $VALUES | cut -d, -f3)}
336 VOLTHA_SSH_PORT=${VOLTHA_SSH_PORT:-$(echo $VALUES | cut -d, -f4)}
337 VOLTHA_ETCD_PORT=${VOLTHA_ETCD_PORT:-$(echo $VALUES | cut -d, -f5)}
David K. Bainbridge00ecd382020-02-28 12:31:58 -0800338 VOLTHA_KAFKA_PORT=${VOLTHA_KAFKA_PORT:-$(echo $VALUES | cut -d, -f6)}
339
David K. Bainbridge00ecd382020-02-28 12:31:58 -0800340 # A bit of a hueristic required here as the KAFKA port forward was
341 # added after the .voltha/ports files was created. Basically, if
342 # the VOLTHA_KAFKA_PORT isn't in the file then calculate the original
343 # DELTA from the VOLTHA_SSH_PORT and apply it to the VOLTHA_KAFKA_PORT
344 if [ -z "$VOLTHA_KAFKA_PORT" ]; then
345 DELTA=$((VOLTHA_SSH_PORT/100-50))
346 VOLTHA_KAFKA_PORT=${VOLTHA_KAFKA_PORT:-$(expr 90 + $DELTA)92}
347 fi
Test User01ed0642019-07-03 20:17:06 +0000348fi
349
David Bainbridge0774b232019-08-02 06:37:19 +0000350PORTTMP=$(mktemp -u)
351cat .voltha/ports | grep -v $NAME > $PORTTMP
David K. Bainbridge00ecd382020-02-28 12:31:58 -0800352echo "$NAME=$ONOS_API_PORT,$ONOS_SSH_PORT,$VOLTHA_API_PORT,$VOLTHA_SSH_PORT,$VOLTHA_ETCD_PORT,$VOLTHA_KAFKA_PORT" >> $PORTTMP
David Bainbridge0774b232019-08-02 06:37:19 +0000353cp $PORTTMP .voltha/ports
354rm -f $PORTTMP
355
David Bainbridge27790d62019-08-13 22:43:19 +0000356export ONOS_API_PORT ONOS_SSH_PORT
David Bainbridge01294952019-07-30 19:33:45 +0000357
Test Userd87942b2019-07-03 07:20:24 +0000358IDX=1
David Bainbridgee87067b2019-08-12 22:00:12 +0000359CLOCK="TIME:"
David Bainbridge38dc1e82019-08-12 15:18:45 +0000360SPIN_PARTS=
361NOT_VERIFIED=
David Bainbridgef858a022019-08-14 21:25:11 +0000362THEX=
363BUILD=
364CROSS=
365ENTER=
David Bainbridge38dc1e82019-08-12 15:18:45 +0000366VERIFIED=
367HELM=
368OLD_KEY=
369BIRD=
370HIGH_VOLTAGE=
371PLUG=
372RESTART=
373FORWARD=
374INSTALL=
375STOP=
376GO=
377DOWNLOAD=
378GEAR=
379NO_ENTRY=
380LOCK=
381
382if [ $FANCY -eq 1 ]; then
383 SPIN_PARTS="\
384 \xe2\xa2\x8e\xe2\xa1\xb0 \
385 \xe2\xa2\x8e\xe2\xa1\xa1 \
386 \xe2\xa2\x8e\xe2\xa1\x91 \
387 \xe2\xa2\x8e\xe2\xa0\xb1 \
388 \xe2\xa0\x8e\xe2\xa1\xb1 \
389 \xe2\xa2\x8a\xe2\xa1\xb1 \
390 \xe2\xa2\x8c\xe2\xa1\xb1 \
391 \xe2\xa2\x86\xe2\xa1\xb1 \
392 "
David Bainbridgee87067b2019-08-12 22:00:12 +0000393 CLOCK="\xe2\x8f\xb1"
David Bainbridgef858a022019-08-14 21:25:11 +0000394 THEX="${RED}${BOLD}\xe2\x9c\x97\x20${NORMAL}"
395 ENTER="${YELLOW}${BOLD}\xe2\x8e\x86${NORMAL}"
396 CROSS="${YELLOW}${BOLD}\xe2\x9c\x9a${NORMAL}"
397 BUILD="${YELLOW}${BOLD}\xf0\x9f\x8f\x97${NORMAL}"
398 NOT_VERIFIED="$BUILD"
399 VERIFIED="${GREEN}${BOLD}\xe2\x9c\x93\x20${NORMAL}"
400 HELM="${BLUE}${BOLD}\xE2\x8E\x88${NORMAL}"
David Bainbridge38dc1e82019-08-12 15:18:45 +0000401 OLD_KEY="\xF0\x9F\x97\x9D"
402 BIRD="\xF0\x9F\x90\xA6"
403 HIGH_VOLTAGE="\xE2\x9A\xA1"
404 PLUG="\xF0\x9F\xa7\xa9"
405 RESTART="\xf0\x9f\x94\x84"
406 FORWARD="\xE2\x87\xA8"
407 INSTALL="\xF0\x9F\x8F\x97"
408 STOP="\xf0\x9f\x9b\x91"
409 GO="\xf0\x9f\x9a\x80"
410 DOWNLOAD="\xf0\x9f\x93\xa5"
411 GEAR="\xe2\x9a\x99"
412 NO_ENTRY="\xe2\x9b\x94"
413 LOCK="\xf0\x9f\x94\x92"
414fi
David K. Bainbridge0e89cb92019-07-17 11:30:10 -0700415
David Bainbridge712afb82019-08-14 19:55:58 +0000416duration() {
David Bainbridgee87067b2019-08-12 22:00:12 +0000417 local h=$(expr $1 / 3600)
418 local m=$(expr $1 % 3600 / 60)
419 local s=$(expr $1 % 60)
420 local t=""
421
422 if [ $h -gt 0 ]; then
423 t="$t${h}h"
424 fi
425 if [ $m -gt 0 ]; then
426 t="$t${m}m"
427 fi
David Bainbridge712afb82019-08-14 19:55:58 +0000428 echo "$t${s}s"
429}
430
431printtime() {
432 local INDENT=
433 if [ "$1" == "-" ]; then
434 INDENT=" "
435 shift
436 fi
437 echo -e "$INDENT $CLOCK $(duration $1)"
David Bainbridgee87067b2019-08-12 22:00:12 +0000438}
439
David K. Bainbridgeb7285432019-07-02 22:05:24 -0700440bspin() {
Test Userd87942b2019-07-03 07:20:24 +0000441 IDX=1
David K. Bainbridgeb7285432019-07-02 22:05:24 -0700442 local INDENT=
443 if [ "$1" == "-" ]; then
444 INDENT=" "
445 shift
446 fi
David Bainbridge38dc1e82019-08-12 15:18:45 +0000447 if [ $FANCY -eq 0 ]; then
448 LINE=$(echo $* | sed -e 's/[\s+-]//g')
449 if [ "$LINE X" == " X" ]; then
450 return
451 fi
452 echo -e "$CIVIS$INDENT$*"
453 else
454 echo -en "$CIVIS$INDENT $*"
455 fi
David K. Bainbridgeb7285432019-07-02 22:05:24 -0700456}
457
458sspin() {
459 local INDENT=
460 if [ "$1" == "-" ]; then
461 INDENT=" "
462 shift
463 fi
David Bainbridge38dc1e82019-08-12 15:18:45 +0000464 if [ $FANCY -eq 0 ]; then
465 LINE=$(echo $* | sed -e 's/[\s+-]//g')
466 if [ "$LINE X" == " X" ]; then
467 return
468 fi
469 echo -e "$INDENT$*"
470 else
471 C=$(echo $SPIN_PARTS | cut '-d ' -f $IDX)
472 echo -en "\r$INDENT$C $*"
473 IDX=$(expr $IDX + 1)
474 if [ $IDX -gt 8 ]; then
475 IDX=1
476 fi
David K. Bainbridgeb7285432019-07-02 22:05:24 -0700477 fi
478}
479
480espin() {
481 local INDENT=
482 if [ "$1" == "-" ]; then
483 INDENT=" "
484 shift
485 fi
David Bainbridge38dc1e82019-08-12 15:18:45 +0000486 if [ $FANCY -eq 0 ]; then
487 LINE=$(echo $* | sed -e 's/[\s+-]//g')
488 if [ "$LINE X" == " X" ]; then
489 return
490 fi
491 echo -e "$INDENT$*"
492 else
493 echo -e "\r$INDENT$*$CNORM"
494 fi
David K. Bainbridgeb7285432019-07-02 22:05:24 -0700495}
496
David Bainbridgeac7f8072019-08-01 22:15:33 +0000497if [ "$1" == "get" -a "$2" == "voltconfig" ]; then
David Bainbridge0774b232019-08-02 06:37:19 +0000498 echo "$HOME/.volt/config-$NAME"
David Bainbridgeac7f8072019-08-01 22:15:33 +0000499 exit
500fi
501
Matteo Scandolo7ef6ba52019-10-04 09:20:37 -0700502if [ $# -ne 1 -o $(echo ":up:down:dump:" | grep -c ":$1:") -ne 1 ]; then
David Bainbridgeac7f8072019-08-01 22:15:33 +0000503 >&2 echo "What wouild you like to do today:"
504 >&2 echo " up - bring up voltha"
505 >&2 echo " down - tear down voltha"
506 >&2 echo " dump - create a debug dump of running system"
507 exit 1
508fi
509
David Bainbridge4f1b5562019-08-19 04:46:52 +0000510push_onos_config() {
Matteo Scandolo78dfee02020-02-13 16:18:03 -0800511 local TYPE=$1
512 local MSG=$2
513 local RESOURCE=$3
514 local DATA=$4
David Bainbridge4f1b5562019-08-19 04:46:52 +0000515
David K. Bainbridgeb4b163b2020-02-19 15:55:06 -0800516 # Thanks to the latest version of ONOS using the return code 207 this gets a
517 # whole lot nastier. Can't thank them enough for doing this. So in order to
518 # capture the command and the output in the log file as well as capture the
519 # status code to verify it is 200 and not 207 mutltiple files and a bit of
520 # hackery must be used. Thanks again ONOS.
521 local CMD_ECHO=$(mktemp -u)
522 local CMD_OUTPUT=$(mktemp -u)
523 local SC_OUTPUT=$(mktemp -u)
David Bainbridge52e6e9d2020-03-23 13:48:27 -0700524 local WAIT_START=$(date +%s)
David K. Bainbridgeb4b163b2020-02-19 15:55:06 -0800525
David Bainbridge4f1b5562019-08-19 04:46:52 +0000526 bspin - "$MSG $GEAR"
527 while true; do
David Bainbridge52e6e9d2020-03-23 13:48:27 -0700528 if [ $(($(date +%s) - $WAIT_START)) -gt $TIMEOUT_SECONDS ]; then
529 espin - "$THEX"
David Bainbridge1cecba52020-03-30 09:43:10 -0700530 rm -f $CMD_ECHO $CMD_OUTPUT $SC_OUTPUT
David Bainbridge52e6e9d2020-03-23 13:48:27 -0700531 doTimeout "waiting for ONOS config push on $RESOURCE"
532 fi
Matteo Scandolo78dfee02020-02-13 16:18:03 -0800533 if [ $TYPE == "file" ]; then
David K. Bainbridgeb859e912020-03-13 14:07:52 -0700534 (set -x; curl --fail -sSL --user karaf:karaf -w "%{http_code}" -o $CMD_OUTPUT -X POST -H Content-Type:application/json http://$_ONOS_API_EP/onos/v1/$RESOURCE --data @$DATA >$SC_OUTPUT 2>/dev/null) >>$CMD_ECHO 2>&1
535 RESULT=$?
Matteo Scandolo78dfee02020-02-13 16:18:03 -0800536 fi
537 if [ $TYPE == "json" ]; then
David K. Bainbridgeb859e912020-03-13 14:07:52 -0700538 (set -x; curl --fail -sSL --user karaf:karaf -w "%{http_code}" -o $CMD_OUTPUT -X POST -H Content-Type:application/json http://$_ONOS_API_EP/onos/v1/$RESOURCE --data $DATA >$SC_OUTPUT 2>/dev/null) >>$CMD_ECHO 2>&1
539 RESULT=$?
Matteo Scandolo78dfee02020-02-13 16:18:03 -0800540 fi
David K. Bainbridgeb4b163b2020-02-19 15:55:06 -0800541 # Dump everything to the log
542 cat $CMD_ECHO >> $LOG
David K. Bainbridgeb859e912020-03-13 14:07:52 -0700543 test -r $CMD_OUTPUT && cat $CMD_OUTPUT >> $LOG
David K. Bainbridgeb4b163b2020-02-19 15:55:06 -0800544 SC=$(cat $SC_OUTPUT)
David K. Bainbridgeb859e912020-03-13 14:07:52 -0700545 echo "RESPONSE CODE: $SC" >> $LOG
546 echo "ERROR CODE: $RESULT" >> $LOG
David K. Bainbridgeb4b163b2020-02-19 15:55:06 -0800547
548 # clean up temp files
549 rm -f $CMD_ECHO $CMD_OUTPUT $SC_OUTPUT
550 if [ $RESULT -eq 0 -a "$SC" == "200" ]; then
David Bainbridge4f1b5562019-08-19 04:46:52 +0000551 break
552 fi
Matteo Scandolo9a77a732020-01-09 14:24:12 -0800553 sleep 1
David Bainbridge4f1b5562019-08-19 04:46:52 +0000554 sspin -
555 done
556 espin - $VERIFIED
557}
558
Matteo Scandolo9a77a732020-01-09 14:24:12 -0800559check_onos_app_active() {
David Bainbridge52e6e9d2020-03-23 13:48:27 -0700560 local APP_ID=$1
561 local WAIT_START=$(date +%s)
Matteo Scandolo9a77a732020-01-09 14:24:12 -0800562
David Bainbridge52e6e9d2020-03-23 13:48:27 -0700563 bspin - "Checking that $APP_ID is active $CLOCK"
564 while true; do
565 if [ $(($(date +%s) - $WAIT_START)) -gt $TIMEOUT_SECONDS ]; then
566 espin - "$THEX"
567 doTimeout "waiting for ONOS application activation '$APP_ID'"
568 fi
569 (set -x; curl --fail -sSL --user karaf:karaf -X GET http://$_ONOS_API_EP/onos/v1/applications/$APP_ID | grep ACTIVE >>$LOG 2>&1) >>$LOG 2>&1
570 if [ $? -eq 0 ]; then
571 break
572 fi
573 sleep 1
574 sspin -
575 done
576 sleep 5 # OSGI components take a little longer that the app to activate
577 espin - $VERIFIED
Matteo Scandolo9a77a732020-01-09 14:24:12 -0800578}
579
David Bainbridge4f1b5562019-08-19 04:46:52 +0000580override_onos_app() {
581 local APP=$1
582 local NAME=$(basename $APP | sed -e 's/^[0-9][0-9]*-//g' -e 's/-.*$//g')
David Bainbridge52e6e9d2020-03-23 13:48:27 -0700583 local WAIT_START=$(date +%s)
584
David Bainbridge4f1b5562019-08-19 04:46:52 +0000585 while true; do
David Bainbridge52e6e9d2020-03-23 13:48:27 -0700586 if [ $(($(date +%s) - $WAIT_START)) -gt $TIMEOUT_SECONDS ]; then
587 espin - "$THEX"
588 doTimeout "waiting to overwrite ONOS application '$APP'"
589 fi
David Bainbridge4f1b5562019-08-19 04:46:52 +0000590 sspin -
591 # Attempt to delete old version (if it exists)
David K. Bainbridge4a06a4a2020-03-02 14:15:23 -0800592 (set -x; curl --fail -sSL --user karaf:karaf -X DELETE http://$_ONOS_API_EP/onos/v1/applications/$NAME >>$LOG 2>&1) >>$LOG 2>&1
David Bainbridge4f1b5562019-08-19 04:46:52 +0000593 sspin -
594 if [ $? -ne 0 ]; then
595 continue
596 fi
David K. Bainbridge4a06a4a2020-03-02 14:15:23 -0800597 (set -x; curl --fail -sSL --user karaf:karaf -X POST -H Content-Type:application/octet-stream http://$_ONOS_API_EP/onos/v1/applications?activate=true --data-binary @$APP >>$LOG 2>&1) >>$LOG 2>&1
David Bainbridge4f1b5562019-08-19 04:46:52 +0000598 if [ $? -eq 0 ]; then
599 break
600 fi
601 sleep .2
602 done
603}
604
605activate_onos_app() {
606 local MSG="$1"
607 local APP=$2
David Bainbridge52e6e9d2020-03-23 13:48:27 -0700608 local WAIT_START=$(date +%s)
David Bainbridge4f1b5562019-08-19 04:46:52 +0000609
610 bspin - "$MSG $GO"
611 while true; do
David Bainbridge52e6e9d2020-03-23 13:48:27 -0700612 if [ $(($(date +%s) - $WAIT_START)) -gt $TIMEOUT_SECONDS ]; then
613 espin - "$THEX"
614 doTimeout "waiting to activate ONOS application '$APP'"
615 fi
David Bainbridge4f1b5562019-08-19 04:46:52 +0000616 sspin -
David K. Bainbridge4a06a4a2020-03-02 14:15:23 -0800617 (set -x; curl --fail -sSL --user karaf:karaf -X POST http://$_ONOS_API_EP/onos/v1/applications/$APP/active >>$LOG 2>&1) >>$LOG 2>&1
David Bainbridge4f1b5562019-08-19 04:46:52 +0000618 if [ $? -eq 0 ]; then
619 break
620 fi
621 sleep .2
622 done
623 espin - "$VERIFIED"
624}
625
626count_pods() {
627 local NAMESPACE=$1; shift
628 if [ "$NAMESPACE" == "all-namespaces" ]; then
629 NAMESPACE="--all-namespaces"
630 else
631 NAMESPACE="-n $NAMESPACE"
632 fi
David Bainbridge4f1b5562019-08-19 04:46:52 +0000633 local STATES=$1; shift
David Bainbridge4f1b5562019-08-19 04:46:52 +0000634 local PODS=$(kubectl get $NAMESPACE pod -o go-template="{{range .items}}{{.metadata.name}}/{{.status.phase}}/_{{range .status.containerStatuses}}{{.ready}}_{{end}} {{end}}")
635 local COUNT=0
636 local PATTERNS="$*"
637 for POD in $PODS; do
638 local NAME=$(echo $POD | cut -d/ -f 1)
639 local STATE=$(echo $POD | cut -d/ -f 2)
640 local CONTAINERS=$(echo $POD | cut -d/ -f 3 | sed -e 's/_/ /g')
641 if [ "$STATES" == "*" -o $(echo "$STATES" | grep -c ":$STATE:") -ne 0 ]; then
David Bainbridge4f1b5562019-08-19 04:46:52 +0000642 local TOTAL=$(echo $CONTAINERS | wc -w)
643 local FOUND=$(echo $CONTAINERS | grep -o true | wc -l)
644 if [ $TOTAL -eq $FOUND ]; then
645 for PATTERN in $PATTERNS; do
David Bainbridge4f1b5562019-08-19 04:46:52 +0000646 if [[ $NAME =~ $PATTERN ]]; then
David Bainbridge4f1b5562019-08-19 04:46:52 +0000647 COUNT=$(expr $COUNT + 1)
648 break
649 fi
650 done
651 fi
652 fi
653 done
David Bainbridge4f1b5562019-08-19 04:46:52 +0000654 echo $COUNT
655}
656
657wait_for_pods() {
658 local INDENT=
659 if [ "$1" == "-" ]; then
660 INDENT=$1; shift
661 fi
662 local NAMESPACE=$1; shift
663 local EXPECT=$1; shift
664 local TYPE=$1; shift
665 local RETRY=$1; shift
666 local MESSAGE=$1; shift
667 local PATTERNS=$*
David Bainbridge99ac7a22019-08-31 02:26:43 +0000668 local STATES=":Running:"
669 if [ "$TYPE" == "not" ]; then
670 STATES="*"
671 fi
672 local HAVE=$(count_pods $NAMESPACE "$STATES" $PATTERNS)
David Bainbridge4f1b5562019-08-19 04:46:52 +0000673 local ALL=$HAVE
674 if [ "$TYPE" == "only" ]; then
675 ALL=$(count_pods "all-namespaces" "*" ".*")
676 fi
677 COUNT=$(expr 300 / 15)
David Bainbridge52e6e9d2020-03-23 13:48:27 -0700678 local WAIT_START=$(date +%s)
David Bainbridge4f1b5562019-08-19 04:46:52 +0000679 bspin $INDENT $MESSAGE
680 sspin $INDENT
681 if [ $HAVE -ne $EXPECT -o $ALL -ne $HAVE ]; then
682 while [ $HAVE -ne $EXPECT -o $ALL -ne $HAVE ]; do
David Bainbridge52e6e9d2020-03-23 13:48:27 -0700683 if [ $(($(date +%s) - $WAIT_START)) -gt $TIMEOUT_SECONDS ]; then
684 espin $INDENT "$THEX"
685 doTimeout "waiting for PODs to start"
686 fi
David Bainbridge4f1b5562019-08-19 04:46:52 +0000687 sspin $INDENT
688 COUNT=$(expr $COUNT - 1)
689 if [ $COUNT -eq 0 ]; then
David Bainbridge99ac7a22019-08-31 02:26:43 +0000690 HAVE=$(count_pods $NAMESPACE "$STATES" $PATTERNS)
David Bainbridge4f1b5562019-08-19 04:46:52 +0000691 ALL=$HAVE
692 if [ "$TYPE" == "only" ]; then
693 ALL=$(count_pods "all-namespaces" "*" ".*")
694 fi
695 COUNT=$(expr 300 / 15)
696 fi
697 sleep .15
698 done
699 fi
700 espin $INDENT $VERIFIED
701 if [ $HAVE -ne $EXPECT ]; then
702 return 1
703 fi
704 return 0
705}
706
David K. Bainbridgefe1fa8a2019-11-12 12:03:21 -0800707port_forward() {
708 local NS=$1
709 local SVC=$2
710 local FROM_PORT=$3
711 local TO_PORT=$4
712 local TAG=$SVC-$NAME
713
714 (set -x; _TAG=$TAG bash -c "while true; do kubectl port-forward -n $NS service/$SVC $FROM_PORT:$TO_PORT; done" >>$LOG 2>&1 &) >>$LOG 2>&1
715}
716
717kill_port_forward() {
718 local TAG=$1-$NAME
David Bainbridgec6871d22019-11-13 17:10:31 +0000719 local P_IDS=$(ps e -ww -A | grep "_TAG=$TAG" | grep -v grep | awk '{print $1}')
David Bainbridgebcf235b2019-11-12 21:33:58 +0000720 local PARENTS=
David K. Bainbridgefe1fa8a2019-11-12 12:03:21 -0800721 local KIDS=
David Bainbridgec6871d22019-11-13 17:10:31 +0000722 local UNKNOWN=
723 if [ ! -z "$P_IDS" ]; then
724 for P_ID in $P_IDS; do
725 local PP_ID=$(ps -o ppid $P_ID | tail -n +2)
726 if [ ! -z "$PP_ID" ]; then
727 if [ $PP_ID -eq 1 ]; then
728 PARENTS="$PARENTS $P_ID"
729 else
730 KIDS="$KIDS $P_ID"
731 fi
David K. Bainbridgefe1fa8a2019-11-12 12:03:21 -0800732 else
David Bainbridgec6871d22019-11-13 17:10:31 +0000733 UNKNOWN="$UNKNOWN $P_ID"
David K. Bainbridgefe1fa8a2019-11-12 12:03:21 -0800734 fi
735 done
David Bainbridgec6871d22019-11-13 17:10:31 +0000736 (set -x; kill -9 $PARENTS $KIDS $UNKNOWN >>$LOG 2>&1) >>$LOG 2>&1
David K. Bainbridgefe1fa8a2019-11-12 12:03:21 -0800737 fi
738}
739
David Bainbridgeac7f8072019-08-01 22:15:33 +0000740if [ "$1" == "down" ]; then
David Bainbridge0774b232019-08-02 06:37:19 +0000741 echo "Tearing down voltha cluster $NAME"
742 LOG="down-$NAME.log"
743 echo $(date -u +"%Y%m%dT%H%M%SZ") >$LOG
David Bainbridge696bc632020-04-05 21:49:37 -0700744 if [ $WITH_ONOS == "yes" ]; then
745 bspin "Remove port-forwards: onos-ui-$NAME"
746 kill_port_forward onos-ui
747 sspin "Remove port-forwards: onos-ssh-$NAME$CEOL"
748 kill_port_forward onos-ssh
749 fi
David K. Bainbridgefe1fa8a2019-11-12 12:03:21 -0800750 sspin "Remove port-forwards: voltha-api-$NAME$CEOL"
751 kill_port_forward voltha-api
David Bainbridge696bc632020-04-05 21:49:37 -0700752 if [ $WITH_ETCD == "yes" ]; then
753 sspin "Remove port-forwards: voltha-etcd-$NAME$CEOL"
754 kill_port_forward voltha-etcd-cluster-client
755 fi
756 if [ $WITH_KAFKA == "yes" ]; then
757 sspin "Remove port-forwards: voltha-kafka-$NAME$CEOL"
758 kill_port_forward voltha-kafka
759 fi
760
David K. Bainbridgefe1fa8a2019-11-12 12:03:21 -0800761 espin "$VERIFIED Remove port-forwards$CEOL"
David Bainbridgeac7f8072019-08-01 22:15:33 +0000762 if [ $DEPLOY_K8S == "yes" ]; then
763 if [ -x ./bin/kind ]; then
David Bainbridge0774b232019-08-02 06:37:19 +0000764 bspin "Delete Kubernetes Kind Cluster"
765 (set -x; ./bin/kind delete cluster --name voltha-$NAME >>$LOG 2>&1) >>$LOG 2>&1
766 espin $VERIFIED
David Bainbridgeac7f8072019-08-01 22:15:33 +0000767 else
David Bainbridge0774b232019-08-02 06:37:19 +0000768 espin "$NO_ENTRY Delete Kubernetes Kind Cluster: kind command not found"
David Bainbridgeac7f8072019-08-01 22:15:33 +0000769 fi
770 else
771 EXISTS=$(helm list -q)
David Bainbridge696bc632020-04-05 21:49:37 -0700772 EXPECT="voltha etcd-operator"
773 if [ $WITH_ONOS == yes ]; then
774 EXPECT+=" onos"
775 fi
776 if [ $WITH_RADIUS == "yes" ]; then
777 EXPECT+=" radius"
778 fi
779 if [ $WITH_BBSIM == "yes" ]; then
780 EXPECT+=" bbsim"
781 fi
782 if [ $WITH_OPEN_ADAPTERS == "yes" ]; then
783 EXPECT+=" open-olt open-onu"
784 fi
785 if [ $WITH_SIM_ADAPTERS == "yes" ]; then
786 EXPECT+=" sim"
787 fi
David Bainbridge0774b232019-08-02 06:37:19 +0000788 bspin "Remove Helm Deployments"
David Bainbridgeac7f8072019-08-01 22:15:33 +0000789 for i in $EXISTS; do
David K. Bainbridge43422402020-03-06 07:41:22 -0800790 for j in $EXPECT; do
791 if [[ $i =~ $j ]]; then
792 sspin "Remove Helm Deployments: $i$CEOL"
793 (set -x; ./bin/helm delete --no-hooks --purge $i >>$LOG 2>&1) >>$LOG 2>&1
794 fi
795 done
uottrembb16d3982020-02-28 08:34:36 +0100796 done
David Bainbridge0774b232019-08-02 06:37:19 +0000797 espin "$VERIFIED Remove Helm Deployments$CEOL"
David Bainbridge4f1b5562019-08-19 04:46:52 +0000798 if [ "$WAIT_ON_DOWN" == "yes" ]; then
David Bainbridge696bc632020-04-05 21:49:37 -0700799 PODS="voltha-kafka.* voltha-ofagent.* voltha-rw-core.* voltha-etcd.* etcd-operator.*"
800 if [ $WITH_RADIUS == "yes" ]; then
801 PODS+=" radius.*"
802 fi
803 if [ $WITH_BBSIM == "yes" ]; then
804 PODS+=" bbsim.*"
805 fi
806 if [ $WITH_OPEN_ADAPTERS -o $WITH_SIM_ADAPTERS ]; then
807 PODS+=" adapter-*"
808 fi
Matteo Scandolo73442f92020-01-29 09:53:22 -0800809 if [ "$WITH_ONOS" == "yes" ]; then
810 ONOS_PODS="onos-.*"
David Bainbridge696bc632020-04-05 21:49:37 -0700811 wait_for_pods "default" 0 "not" -1 "Waiting for ONOS PODs to terminate" $ONOS_PODS
812 fi
813 wait_for_pods "voltha" 0 "not" -1 "Waiting for VOLTHA PODs to terminate" $PODS
David Bainbridge4f1b5562019-08-19 04:46:52 +0000814 fi
David Bainbridgeac7f8072019-08-01 22:15:33 +0000815 fi
Matteo Scandolo7ef6ba52019-10-04 09:20:37 -0700816 exit
David Bainbridgeac7f8072019-08-01 22:15:33 +0000817fi
818
819if [ "$1" == "dump" ]; then
David Bainbridge0774b232019-08-02 06:37:19 +0000820 LOG="dump-$NAME.log"
David Bainbridgeac7f8072019-08-01 22:15:33 +0000821 TS=$(date -u +"%Y%m%dT%H%M%SZ")
David Bainbridge76514a02019-10-08 01:50:35 +0000822 if [ ! -z "$DUMP_FROM" ]; then
823 TS=$(echo $DUMP_FROM | sed -e 's/[:-]//g')
824 fi
David Bainbridgeac7f8072019-08-01 22:15:33 +0000825 WORK=$(mktemp -u -d)
David Bainbridge0774b232019-08-02 06:37:19 +0000826 DATA=$WORK/voltha-debug-dump-$NAME-$TS
David Bainbridgeac7f8072019-08-01 22:15:33 +0000827 mkdir -p $DATA
828 echo $TS > $LOG
David Bainbridge0774b232019-08-02 06:37:19 +0000829 echo -e "Capturing debug dump to voltha-debug-dump-$NAME-$TS.tgz"
David Bainbridgeac7f8072019-08-01 22:15:33 +0000830 bspin - "Copy install log"
David Bainbridge0774b232019-08-02 06:37:19 +0000831 if [ -f install-$NAME.log ]; then
832 (set -x; cp install-$NAME.log $DATA/install-$NAME.log) >>$LOG 2>&1
David Bainbridgeac7f8072019-08-01 22:15:33 +0000833 espin - $VERIFIED
834 else
David Bainbridge0774b232019-08-02 06:37:19 +0000835 espin - "$NO_ENTRY Copy install log: install-$NAME.log not found"
David Bainbridgeac7f8072019-08-01 22:15:33 +0000836 fi
837 bspin - "Dumping Kubernetes PODs"
838 (set -x; kubectl get --all-namespaces pods >> $DATA/all-pods.txt 2>&1) >>$LOG 2>&1
839 espin - $VERIFIED
840 bspin - "Dumping Kubernetes SERVICEs"
841 (set -x; kubectl get --all-namespaces svc >> $DATA/all-services.txt 2>&1) >>$LOG 2>&1
842 espin - $VERIFIED
843 bspin - "Dumping Kubernetes EVENTs"
844 (set -x; kubectl get --all-namespaces events >> $DATA/all-events.txt 2>&1) >>$LOG 2>&1
845 espin - $VERIFIED
846 bspin - "Dumping VOLTHA POD details"
Matteo Scandolodcd29f52019-10-07 15:42:42 -0700847 PODS="$(kubectl -n default get pod -o name | grep onos | sed -e 's/^/default:/g') $(kubectl get -n voltha pod -o name | sed -e 's/^/voltha:/g')"
David Bainbridgecfd7ca12019-10-06 03:31:41 +0000848 SINCE=
849 if [ ! -z "$DUMP_FROM" ]; then
850 SINCE="--since-time=$DUMP_FROM"
851 fi
David Bainbridgeac7f8072019-08-01 22:15:33 +0000852 for POD in $PODS; do
David Bainbridge1f0655a2019-10-01 22:08:48 +0000853 NS=$(echo $POD | cut -d: -f1)
854 POD=$(echo $POD | cut -d: -f2)
David Bainbridgeac7f8072019-08-01 22:15:33 +0000855 sspin - "Dumping VOLTHA POD details: $POD$CEOL"
856 mkdir -p $DATA/$POD
David Bainbridge1f0655a2019-10-01 22:08:48 +0000857 (set -x; kubectl describe -n $NS $POD >> $DATA/$POD/describe.txt 2>&1) >>$LOG 2>&1
David Bainbridgeac7f8072019-08-01 22:15:33 +0000858 sspin - "Dumping VOLTHA POD details: $POD"
David Bainbridgecfd7ca12019-10-06 03:31:41 +0000859 (set -x; kubectl logs -n $NS --all-containers $SINCE --previous $LOG_ARGS $POD >> $DATA/$POD/logs-previous.txt 2>&1) >>$LOG 2>&1
David Bainbridgeac7f8072019-08-01 22:15:33 +0000860 sspin - "Dumping VOLTHA POD details: $POD"
David Bainbridgecfd7ca12019-10-06 03:31:41 +0000861 (set -x; kubectl logs -n $NS --all-containers $SINCE $LOG_ARGS $POD >> $DATA/$POD/logs-current.txt 2>&1) >>$LOG 2>&1
David Bainbridgeac7f8072019-08-01 22:15:33 +0000862 sspin - "Dumping VOLTHA POD details: $POD"
863 done
864 espin - "$VERIFIED Dumping VOLTHA POD details$CEOL"
865 bspin - "Dumping ETCD"
866 if [ "$(which etcdctl) X" != " X" ]; then
David Bainbridge0774b232019-08-02 06:37:19 +0000867 (set -x; ETCDCTL_API=3 etcdctl --endpoints localhost:$VOLTHA_ETCD_PORT get --prefix service/voltha | hexdump -C >> $DATA/etcd.hex 2>&1) >>$LOG 2>&1
David Bainbridgeac7f8072019-08-01 22:15:33 +0000868 espin - $VERIFIED
869 else
870 espin - "$NO_ENTRY Dumping ETCD: etcdctl command not available"
871 fi
David Bainbridge0774b232019-08-02 06:37:19 +0000872 bspin - "Creating compressed TAR: voltha-debug-dump-$NAME-$TS.tgz"
873 (set -x; tar -C $WORK -zcf voltha-debug-dump-$NAME-$TS.tgz ./voltha-debug-dump-$NAME-$TS) >>$LOG 2>&1
David Bainbridgeac7f8072019-08-01 22:15:33 +0000874 espin - $VERIFIED
875 bspin - "Cleanup"
876 (set -x; rm -rf $WORK) >>$LOG 2>&1
877 espin - $VERIFIED
David Bainbridge0774b232019-08-02 06:37:19 +0000878 bspin - "$(ls -l voltha-debug-dump-$NAME-$TS.tgz)"
David Bainbridgeac7f8072019-08-01 22:15:33 +0000879 espin - $VERIFIED
880 exit
881fi
882
David Bainbridge0774b232019-08-02 06:37:19 +0000883LOG="install-$NAME.log"
David Bainbridgeac7f8072019-08-01 22:15:33 +0000884date > $LOG
David Bainbridge0774b232019-08-02 06:37:19 +0000885echo "PORTS=$ONOS_API_PORT,$ONOS_SSH_PORT,$VOLTHA_API_PORT,$VOLTHA_SSH_PORT,$VOLTHA_ETCD_PORT" >> $LOG
David Bainbridgeac7f8072019-08-01 22:15:33 +0000886
887# Output install options to log
888echo "OPTIONS" >> $LOG
David Bainbridgeac7f8072019-08-01 22:15:33 +0000889for O in $ALL_OPTIONS; do
890 VAL=$(eval echo \$$O)
David Bainbridgeac7f8072019-08-01 22:15:33 +0000891 if [ ! -z "$VAL" ]; then
892 printf " %-30s = %s\n" $O $VAL >> $LOG
893 fi
894done
895
Matteo Scandolo7ef6ba52019-10-04 09:20:37 -0700896helm_install() {
David K. Bainbridgeb7285432019-07-02 22:05:24 -0700897 local INDENT=
898 if [ "$1" == "-" ]; then
899 INDENT=$1; shift
900 fi
901 local NAMESPACE=$1; shift
David Bainbridge0774b232019-08-02 06:37:19 +0000902 local INAME=$1; shift
David K. Bainbridgeb7285432019-07-02 22:05:24 -0700903 local CHART=$1; shift
David Bainbridge90fd8e32019-08-21 23:32:47 +0000904 local CHART_VERSION=$1; shift
David K. Bainbridgeb7285432019-07-02 22:05:24 -0700905 local MESSAGE=$*
906
David Bainbridge90fd8e32019-08-21 23:32:47 +0000907 if [ "$CHART_VERSION X" != " X" -a "$CHART_VERSION" != "latest" ]; then
908 CHART_VERSION="--version $CHART_VERSION"
909 else
910 CHART_VERSION=
911 fi
912
David Bainbridge99ac7a22019-08-31 02:26:43 +0000913 local CHART_ARGS=
914 if [ -r "${INAME}-values.yaml" ]; then
915 CHART_ARGS="-f ${INAME}-values.yaml"
916 fi
917
David Bainbridge52e6e9d2020-03-23 13:48:27 -0700918 local WAIT_START=$(date +%s)
David K. Bainbridgeb7285432019-07-02 22:05:24 -0700919 COUNT=$(expr 300 / 15)
920 bspin $INDENT $MESSAGE
David Bainbridge2eaf2cf2020-03-18 12:54:08 -0700921 (set -x; helm install -f $NAME-values.yaml $CHART_ARGS $INTERNAL_EXTRA_HELM_INSTALL_ARGS $EXTRA_HELM_INSTALL_ARGS --set defaults.log_level=$VOLTHA_LOG_LEVEL --namespace $NAMESPACE --name $INAME $CHART_VERSION $EXTRA_HELM_FLAGS $CHART >>$LOG 2>&1) >>$LOG 2>&1
David K. Bainbridgeb7285432019-07-02 22:05:24 -0700922 SUCCESS=$?
923 while [ $SUCCESS -ne 0 ]; do
David Bainbridge52e6e9d2020-03-23 13:48:27 -0700924 if [ $(($(date +%s) - $WAIT_START)) -gt $TIMEOUT_SECONDS ]; then
925 espin "$THEX"
926 doTimeout "waiting for helm install $CHART"
927 fi
David K. Bainbridgeb7285432019-07-02 22:05:24 -0700928 sspin $INDENT
929 COUNT=$(expr $COUNT - 1)
930 if [ $COUNT -eq 0 ]; then
Andy Baviere22ff252019-12-19 11:40:31 -0700931 (set -x; helm delete --purge $INAME >>$LOG 2>&1) >>$LOG 2>&1
David Bainbridge2eaf2cf2020-03-18 12:54:08 -0700932 (set -x; helm install -f $NAME-values.yaml $CHART_ARGS $INTERNAL_EXTRA_HELM_INSTALL_ARGS $EXTRA_HELM_INSTALL_ARGS --set defaults.log_level=$VOLTHA_LOG_LEVEL --namespace $NAMESPACE --name $INAME $CHART_VERSION $EXTRA_HELM_FLAGS $CHART >>$LOG 2>&1) >>$LOG 2>&1
Andy Baviere22ff252019-12-19 11:40:31 -0700933 SUCCESS=$?
David K. Bainbridgeb7285432019-07-02 22:05:24 -0700934 COUNT=$(expr 300 / 15)
935 fi
936 sleep .15
937 done
938 espin $INDENT $VERIFIED
939}
940
David K. Bainbridgeb7285432019-07-02 22:05:24 -0700941echo "INSTALL TYPE: $TYPE" >> $LOG
942
943bspin "Verify GOPATH"
944export GOPATH=$(pwd)
Test User3d7ad8e2019-07-03 06:15:44 +0000945mkdir -p $GOPATH/bin
David K. Bainbridgeb7285432019-07-02 22:05:24 -0700946espin $VERIFIED
947
David Bainbridgee87067b2019-08-12 22:00:12 +0000948STIME=$(date +%s)
David K. Bainbridge0e89cb92019-07-17 11:30:10 -0700949if [ "$INSTALL_KUBECTL" == "no" ]; then
950 bspin "Skip kubectl install"
951 espin $NO_ENTRY
Test Userc13bdc92019-07-03 20:57:49 +0000952else
David K. Bainbridge0e89cb92019-07-17 11:30:10 -0700953 bspin "Verify kubectl $HELM"
954 if [ -x $GOPATH/bin/kubectl ]; then
955 espin $VERIFIED
956 else
957 espin $NOT_VERIFIED
958 bspin - "Download and install Kubernetes/kubectl $DOWNLOAD"
959 (set -x; curl -o $GOPATH/bin/kubectl -sSL https://storage.googleapis.com/kubernetes-release/release/$(curl -s https://storage.googleapis.com/kubernetes-release/release/stable.txt)/bin/$HOSTOS/$HOSTARCH/kubectl >>$LOG 2>&1) >>$LOG 2>&1
960 (set -x; chmod 755 $GOPATH/bin/kubectl >>$LOG 2>&1) >>$LOG 2>&1
961 espin - $VERIFIED
962 fi
Test Userc13bdc92019-07-03 20:57:49 +0000963fi
David Bainbridgee87067b2019-08-12 22:00:12 +0000964if [ "$WITH_TIMINGS" == "yes" ]; then
David Bainbridge712afb82019-08-14 19:55:58 +0000965 printtime $(expr $(date +%s) - $STIME)
David Bainbridgee87067b2019-08-12 22:00:12 +0000966fi
Test Userc13bdc92019-07-03 20:57:49 +0000967
David Bainbridgee87067b2019-08-12 22:00:12 +0000968STIME=$(date +%s)
David K. Bainbridge0e89cb92019-07-17 11:30:10 -0700969if [ "$DEPLOY_K8S" == "no" ]; then
970 bspin "Skip Kubernetes/Kind Deployment"
971 espin $NO_ENTRY
972else
Test Userba1e7e72019-07-10 22:27:54 +0000973 bspin "Verify Kubernetes/Kind $HELM"
David K. Bainbridgefe1fa8a2019-11-12 12:03:21 -0800974 IS_INSTALLED=0
975 OP_TYPE="install"
Test Userba1e7e72019-07-10 22:27:54 +0000976 if [ -x $GOPATH/bin/kind ]; then
David K. Bainbridgefe1fa8a2019-11-12 12:03:21 -0800977 OP_TYPE="upgrade"
978 if [ $($GOPATH/bin/kind --version | grep -c $KIND_VERSION) -eq 1 ]; then
979 IS_INSTALLED=1
980 espin $VERIFIED
981 fi
982 fi
983 if [ $IS_INSTALLED -eq 0 ]; then
Test Userba1e7e72019-07-10 22:27:54 +0000984 espin $NOT_VERIFIED
David K. Bainbridgefe1fa8a2019-11-12 12:03:21 -0800985 bspin - "Download and $OP_TYPE Kubernetes/kind $DOWNLOAD"
David Bainbridge9e2a6662019-07-11 17:07:57 +0000986 (set -x; curl -o $GOPATH/bin/kind -sSL https://github.com/kubernetes-sigs/kind/releases/download/$KIND_VERSION/kind-$HOSTOS-$HOSTARCH >>$LOG 2>&1) >>$LOG 2>&1
Test Userba1e7e72019-07-10 22:27:54 +0000987 (set -x; chmod 755 $GOPATH/bin/kind >>$LOG 2>&1) >>$LOG 2>&1
988 espin - $VERIFIED
989 fi
David K. Bainbridgeb7285432019-07-02 22:05:24 -0700990fi
991
David Bainbridgee87067b2019-08-12 22:00:12 +0000992if [ "$WITH_TIMINGS" == "yes" ]; then
David Bainbridge712afb82019-08-14 19:55:58 +0000993 printtime $(expr $(date +%s) - $STIME)
David Bainbridgee87067b2019-08-12 22:00:12 +0000994fi
995
996STIME=$(date +%s)
David K. Bainbridge0e89cb92019-07-17 11:30:10 -0700997if [ "$INSTALL_HELM" == "no" ]; then
998 bspin "Skip Helm Install"
999 espin $NO_ENTRY
David K. Bainbridgeb7285432019-07-02 22:05:24 -07001000else
David K. Bainbridge0e89cb92019-07-17 11:30:10 -07001001 bspin "Verify Helm $HELM"
David Bainbridgea34993d2020-04-01 09:15:42 -07001002 HELM_UPGRADE=0
1003 HELM_UPGRADE_DESC="install"
David K. Bainbridge0e89cb92019-07-17 11:30:10 -07001004 if [ -x $GOPATH/bin/helm ]; then
David Bainbridgea34993d2020-04-01 09:15:42 -07001005 HAVE_VER=$($GOPATH/bin/helm version -c --template '{{.Client.SemVer}}')
1006 HELM_UP_DOWN=$(echo -e "$HAVE_VER\n$HELM_VERSION" | sort -V | head -1)
1007 if [ $HAVE_VER != $HELM_VERSION ]; then
1008 if [ $HELM_UP_DOWN == $HELM_VERSION ]; then
1009 HELM_UPGRADE_DESC="downgrade"
1010 else
1011 HELM_UPGRADE_DESC="upgrade"
1012 fi
1013 HELM_UPGRADE=1
1014 else
1015 espin $VERIFIED
1016 fi
David K. Bainbridge0e89cb92019-07-17 11:30:10 -07001017 else
David Bainbridgea34993d2020-04-01 09:15:42 -07001018 HELM_UPGRADE=1
1019 fi
1020
1021 if [ $HELM_UPGRADE -ne 0 ]; then
David K. Bainbridge0e89cb92019-07-17 11:30:10 -07001022 espin $NOT_VERIFIED
David Bainbridgea34993d2020-04-01 09:15:42 -07001023 bspin - "Download and $HELM_UPGRADE_DESC Helm $DOWNLOAD"
1024 (set -x; curl -sSL https://git.io/get_helm.sh | DESIRED_VERSION=$HELM_VERSION USE_SUDO=false HELM_INSTALL_DIR=$GOPATH/bin bash >>$LOG 2>&1) >>$LOG 2>&1
David K. Bainbridge0e89cb92019-07-17 11:30:10 -07001025 espin - $VERIFIED
1026 fi
David K. Bainbridgeb7285432019-07-02 22:05:24 -07001027fi
David K. Bainbridgefe1fa8a2019-11-12 12:03:21 -08001028
David Bainbridgee87067b2019-08-12 22:00:12 +00001029if [ "$WITH_TIMINGS" == "yes" ]; then
David Bainbridge712afb82019-08-14 19:55:58 +00001030 printtime $(expr $(date +%s) - $STIME)
David Bainbridgee87067b2019-08-12 22:00:12 +00001031fi
David K. Bainbridgeb7285432019-07-02 22:05:24 -07001032
David Bainbridgee87067b2019-08-12 22:00:12 +00001033STIME=$(date +%s)
Test Userb5712372019-07-03 21:52:17 +00001034bspin "Verify voltctl $HIGH_VOLTAGE"
David Bainbridged2811972019-12-14 01:14:09 +00001035VOK=0
1036VMESSAGE="install"
David K. Bainbridgeebf38d92020-02-10 10:46:31 -08001037export VC_VERSION="$VOLTCTL_VERSION"
1038if [ "$VC_VERSION" == "latest" ]; then
1039 export VC_VERSION=$(curl -sSL https://api.github.com/repos/opencord/voltctl/releases/latest | jq -r .tag_name | sed -e 's/^v//g')
1040fi
Test User3d7ad8e2019-07-03 06:15:44 +00001041if [ -x $GOPATH/bin/voltctl ]; then
David Bainbridge1ba64f12019-12-18 00:40:13 +00001042 VHAVE=$($GOPATH/bin/voltctl version --clientonly -o json | jq -r .version)
David K. Bainbridgeebf38d92020-02-10 10:46:31 -08001043 if [ $? -eq 0 -a "$VHAVE" == "$VC_VERSION" ]; then
David Bainbridged2811972019-12-14 01:14:09 +00001044 VOK=1
David Bainbridge1ba64f12019-12-18 00:40:13 +00001045 espin $VERIFIED
1046 else
David K. Bainbridgeebf38d92020-02-10 10:46:31 -08001047 VCHECK=$(echo -e "$VHAVE\n$VC_VERSION" | sort -V | head -1)
1048 if [ "$VCHECK" == "$VHAVE" ]; then
1049 VMESSAGE="upgrade"
1050 else
1051 VMESSAGE="downgrade"
1052 fi
David Bainbridged2811972019-12-14 01:14:09 +00001053 fi
1054fi
1055
David Bainbridge1ba64f12019-12-18 00:40:13 +00001056if [ $VOK -eq 0 ]; then
David K. Bainbridgeb7285432019-07-02 22:05:24 -07001057 espin $NOT_VERIFIED
David Bainbridged2811972019-12-14 01:14:09 +00001058 bspin - "Download and $VMESSAGE voltctl $DOWNLOAD"
David K. Bainbridgeebf38d92020-02-10 10:46:31 -08001059 (set -x; curl -o $GOPATH/bin/voltctl -sSL https://github.com/opencord/voltctl/releases/download/v$VC_VERSION/voltctl-$VC_VERSION-$HOSTOS-$HOSTARCH >>$LOG 2>&1) >>$LOG 2>&1
Test User08ebbd92019-07-03 17:15:39 +00001060 (set -x; chmod 755 $GOPATH/bin/voltctl >>$LOG 2>&1) >>$LOG 2>&1
David K. Bainbridgeb7285432019-07-02 22:05:24 -07001061 espin - $VERIFIED
1062fi
David Bainbridgee87067b2019-08-12 22:00:12 +00001063if [ "$WITH_TIMINGS" == "yes" ]; then
David Bainbridge712afb82019-08-14 19:55:58 +00001064 printtime $(expr $(date +%s) - $STIME)
David Bainbridgee87067b2019-08-12 22:00:12 +00001065fi
David K. Bainbridgeb7285432019-07-02 22:05:24 -07001066
1067bspin "Verify command PATH"
Test Userba1e7e72019-07-10 22:27:54 +00001068export PATH=$GOPATH/bin:$PATH
David K. Bainbridgeb7285432019-07-02 22:05:24 -07001069espin $VERIFIED
David K. Bainbridgeb7285432019-07-02 22:05:24 -07001070
David Bainbridgee87067b2019-08-12 22:00:12 +00001071STIME=$(date +%s)
Test Userba1e7e72019-07-10 22:27:54 +00001072if [ "$DEPLOY_K8S" == "yes" ]; then
David Bainbridge0774b232019-08-02 06:37:19 +00001073 HAVE=$(kind get clusters | grep -c voltha-$NAME)
Test Userba1e7e72019-07-10 22:27:54 +00001074 bspin "Verify Kubernetes/Kind Cluster"
1075 sspin
1076 if [ $HAVE -eq 0 ]; then
David Bainbridge491b1bd2019-07-11 17:53:11 +00001077 espin $NOT_VERIFIED
1078 bspin - "Verify cluster configuration"
David Bainbridge0774b232019-08-02 06:37:19 +00001079 if [ ! -r ./$NAME-cluster.cfg ]; then
David Bainbridge491b1bd2019-07-11 17:53:11 +00001080 espin - $NOT_VERIFIED
David K. Bainbridge43422402020-03-06 07:41:22 -08001081 bspin - "Download cluster configuration: $TYPE-cluster.cfg to $NAME-cluster.cfg $DOWNLOAD"
David K. Bainbridgea00736b2020-01-08 14:33:17 -08001082 ERR_OUT=$(mktemp)
1083 (set -x; curl --fail -o ./$NAME-cluster.cfg -sSL https://raw.githubusercontent.com/ciena/kind-voltha/$VK_RELEASE/$TYPE-cluster.cfg >>$LOG 2>>$ERR_OUT) >>$LOG 2>&1
1084 if [ $? -ne 0 ]; then
1085 espin - $THEX
1086 echo -e "${RED}${BOLD}${ERROR}ERROR: $NAME-cluster.cfg${NORMAL}${RED} - $(cat $ERR_OUT)${NORMAL}"
1087 echo "ERROR: $(cat $ERR_OUT)" >>$LOG
1088 rm -rf $ERR_OUT ./$NAME-cluster.cfg
1089 exit 1
1090 fi
1091 rm -rf $ERR_OUT
1092 else
David K. Bainbridge43422402020-03-06 07:41:22 -08001093 espin - $VERIFIED
David K. Bainbridgea00736b2020-01-08 14:33:17 -08001094 fi
David Bainbridge0774b232019-08-02 06:37:19 +00001095 kind create cluster --name voltha-$NAME --config $NAME-cluster.cfg
David Bainbridge491b1bd2019-07-11 17:53:11 +00001096 else
1097 espin $VERIFIED
Test Userba1e7e72019-07-10 22:27:54 +00001098 fi
1099
David Bainbridge0774b232019-08-02 06:37:19 +00001100 export KUBECONFIG="$(kind get kubeconfig-path --name="voltha-$NAME")"
Test Userba1e7e72019-07-10 22:27:54 +00001101 P="coredns-.* \
David Bainbridge0774b232019-08-02 06:37:19 +00001102 etcd-voltha-$NAME-control-plane \
Test Userba1e7e72019-07-10 22:27:54 +00001103 kindnet-.* \
David Bainbridge0774b232019-08-02 06:37:19 +00001104 kube-apiserver-voltha-$NAME-control-plane \
1105 kube-controller-manager-voltha-$NAME-control-plane \
Test Userba1e7e72019-07-10 22:27:54 +00001106 kube-proxy-.* \
David Bainbridge0774b232019-08-02 06:37:19 +00001107 kube-scheduler-voltha-$NAME-control-plane"
Test Userba1e7e72019-07-10 22:27:54 +00001108
1109 EXPECT=$(test "$TYPE" == "minimal" && echo "12" || echo "14")
David Bainbridge4f1b5562019-08-19 04:46:52 +00001110 wait_for_pods - "kube-system" $EXPECT "includes" -1 "Waiting for system PODs to start" $P
David K. Bainbridgeb7285432019-07-02 22:05:24 -07001111fi
David Bainbridgee87067b2019-08-12 22:00:12 +00001112if [ "$WITH_TIMINGS" == "yes" ]; then
David Bainbridge712afb82019-08-14 19:55:58 +00001113 printtime $(expr $(date +%s) - $STIME)
David Bainbridgee87067b2019-08-12 22:00:12 +00001114fi
David K. Bainbridgeb7285432019-07-02 22:05:24 -07001115
David Bainbridgee87067b2019-08-12 22:00:12 +00001116STIME=$(date +%s)
David Bainbridge4c6289c2019-09-03 21:11:32 +00001117COUNT=$(count_pods "kube-system" ":Running:" "tiller-deploy-.*")
David K. Bainbridgeb7285432019-07-02 22:05:24 -07001118bspin "Verify Helm"
Test Userba1e7e72019-07-10 22:27:54 +00001119if [ $COUNT -ne 1 ]; then
David K. Bainbridgeb7285432019-07-02 22:05:24 -07001120 espin $NOT_VERIFIED
Test Userb5712372019-07-03 21:52:17 +00001121 echo -e "Configuring Helm $GEAR"
David K. Bainbridge0e89cb92019-07-17 11:30:10 -07001122 if [ "$INSTALL_HELM" == "no" ]; then
1123 bspin - "Skip Helm/Tiller Initialization"
1124 espin - $NO_ENTRY
1125 else
1126 bspin - "Initialize Helm"
1127 (set -x; helm init --upgrade >>$LOG 2>&1) >>$LOG 2>&1
1128 espin - $VERIFIED
David Bainbridge4f1b5562019-08-19 04:46:52 +00001129 wait_for_pods - "kube-system" 1 "includes" -1 "Waiting for Tiller POD to start" "tiller-deploy-.*"
David K. Bainbridge0e89cb92019-07-17 11:30:10 -07001130 fi
Test Userb5712372019-07-03 21:52:17 +00001131 bspin - "Add Google Incubator repository to Helm"
David K. Bainbridgeb7285432019-07-02 22:05:24 -07001132 (set -x; helm repo add incubator https://kubernetes-charts-incubator.storage.googleapis.com >>$LOG 2>&1) >>$LOG 2>&1
1133 espin - $VERIFIED
Matteo Scandolo7ef6ba52019-10-04 09:20:37 -07001134
Test Userba1e7e72019-07-10 22:27:54 +00001135 # HACK (sort-of) - the config for tiller is about to be patched, which will
1136 # cause the tiller pod to be recreated. This can sometimes cause a timing
1137 # issue with the "wait_for_pods" call on tiller as it may incorrectly
Matteo Scandolo7ef6ba52019-10-04 09:20:37 -07001138 # identify the running/ready tiller pod that is soon to be terminated as
Test Userba1e7e72019-07-10 22:27:54 +00001139 # what it is waiting for. To avoid this issue we do a clean scale down and
Matteo Scandolo7ef6ba52019-10-04 09:20:37 -07001140 # scale up of the pod so the script controlls when it should be expecting
Test Userba1e7e72019-07-10 22:27:54 +00001141 # things
1142 (set -x; kubectl -n kube-system scale deploy tiller-deploy --replicas=0 >>$LOG 2>&1) >>$LOG 2>&1
David K. Bainbridgeb7285432019-07-02 22:05:24 -07001143
Test Userb5712372019-07-03 21:52:17 +00001144 bspin - "Add Google Stable repository to Helm"
David K. Bainbridgeb7285432019-07-02 22:05:24 -07001145 (set -x; helm repo add stable https://kubernetes-charts.storage.googleapis.com >>$LOG 2>&1) >>$LOG 2>&1
1146 espin - $VERIFIED
Test Userb5712372019-07-03 21:52:17 +00001147 bspin - "Add ONF repository to Helm"
David K. Bainbridgeb7285432019-07-02 22:05:24 -07001148 (set -x; helm repo add onf https://charts.opencord.org >>$LOG 2>&1) >>$LOG 2>&1
1149 espin - $VERIFIED
Test Userb5712372019-07-03 21:52:17 +00001150 bspin - "Update Helm repository cache"
David K. Bainbridgeb7285432019-07-02 22:05:24 -07001151 (set -x; helm repo update >>$LOG 2>&1) >>$LOG 2>&1
1152 espin - $VERIFIED
Matteo Scandolo7ef6ba52019-10-04 09:20:37 -07001153
David K. Bainbridgeb7285432019-07-02 22:05:24 -07001154 # Create and k8s service account so that Helm can create pods
Test Userb5712372019-07-03 21:52:17 +00001155 bspin - "Create Tiller ServiceAccount"
David K. Bainbridgeb7285432019-07-02 22:05:24 -07001156 (set -x; kubectl create serviceaccount --namespace kube-system tiller >>$LOG 2>&1) >>$LOG 2>&1
1157 espin - $VERIFIED
Test Userb5712372019-07-03 21:52:17 +00001158 bspin - "Create Tiller ClusterRoleBinding"
David K. Bainbridgeb7285432019-07-02 22:05:24 -07001159 (set -x; kubectl create clusterrolebinding tiller-cluster-rule --clusterrole=cluster-admin --serviceaccount=kube-system:tiller >>$LOG 2>&1) >>$LOG 2>&1
1160 espin - $VERIFIED
Test Userb5712372019-07-03 21:52:17 +00001161 bspin - "Update Tiller Manifest"
David K. Bainbridgeb7285432019-07-02 22:05:24 -07001162 (set -x; kubectl patch deploy --namespace kube-system tiller-deploy -p '{"spec":{"template":{"spec":{"serviceAccount":"tiller"}}}}' >>$LOG 2>&1) >>$LOG 2>&1
Test Userba1e7e72019-07-10 22:27:54 +00001163
1164 # HACK (sort-of) - part to, spin it back up
1165 (set -x; kubectl -n kube-system scale deploy tiller-deploy --replicas=1 >>$LOG 2>&1) >>$LOG 2>&1
David K. Bainbridgeb7285432019-07-02 22:05:24 -07001166 espin - $VERIFIED
1167else
David Bainbridgea34993d2020-04-01 09:15:42 -07001168 if [ $(helm version -s --template '{{.Server.SemVer}}') != $HELM_VERSION ]; then
1169 espin $NOT_VERIFIED
1170 bspin - "Sync Tiller server version with helm client"
1171 (set -x; helm init --upgrade --force-upgrade --wait >>$LOG 2>&1) >>$LOG 2>&1
1172 espin - $VERIFIED
1173 else
1174 espin $VERIFIED
1175 fi
1176
David Bainbridge46505fb2019-10-01 21:13:20 +00001177 if [ "$UPDATE_HELM_REPOS" == "yes" ]; then
1178 bspin - "Update Helm repository cache"
1179 (set -x; helm repo update >>$LOG 2>&1) >>$LOG 2>&1
1180 espin - $VERIFIED
1181 fi
David K. Bainbridgeb7285432019-07-02 22:05:24 -07001182fi
David Bainbridge4f1b5562019-08-19 04:46:52 +00001183wait_for_pods - "kube-system" 1 "includes" -1 "Waiting for Tiller POD to start" "tiller-deploy-.*"
David Bainbridgee87067b2019-08-12 22:00:12 +00001184if [ "$WITH_TIMINGS" == "yes" ]; then
David Bainbridge712afb82019-08-14 19:55:58 +00001185 printtime $(expr $(date +%s) - $STIME)
David Bainbridgee87067b2019-08-12 22:00:12 +00001186fi
David K. Bainbridgeb7285432019-07-02 22:05:24 -07001187
David Bainbridgee87067b2019-08-12 22:00:12 +00001188STIME=$(date +%s)
David Bainbridge0774b232019-08-02 06:37:19 +00001189bspin "Verify Helm values file: $NAME-values.yaml"
1190if [ ! -r "./$NAME-values.yaml" ]; then
Test Userba1e7e72019-07-10 22:27:54 +00001191 espin $NOT_VERIFIED
David Bainbridge0774b232019-08-02 06:37:19 +00001192 bspin - "Download Helm values file: $TYPE-values.yaml to $NAME-values.yaml $DOWNLOAD"
David K. Bainbridgea00736b2020-01-08 14:33:17 -08001193 ERR_OUT=$(mktemp)
1194 (set -x; curl --fail -o ./$NAME-values.yaml -sSL https://raw.githubusercontent.com/ciena/kind-voltha/$VK_RELEASE/$TYPE-values.yaml >>$LOG 2>$ERR_OUT) >>$LOG 2>&1
1195 if [ $? -ne 0 ]; then
1196 espin - $THEX
1197 echo -e "${RED}${BOLD}${ERROR}ERROR: $NAME-values.yaml${NORMAL}${RED} - $(cat $ERR_OUT)${NORMAL}"
1198 echo "ERROR: $(cat $ERR_OUT)" >>$LOG
1199 rm -rf $ERR_OUT ./$NAME-values.yaml
1200 exit 1
1201 fi
1202 rm -rf $ERR_OUT
Test Userba1e7e72019-07-10 22:27:54 +00001203 espin - $VERIFIED
1204else
1205 espin $VERIFIED
1206fi
David Bainbridgee87067b2019-08-12 22:00:12 +00001207if [ "$WITH_TIMINGS" == "yes" ]; then
David Bainbridge712afb82019-08-14 19:55:58 +00001208 printtime $(expr $(date +%s) - $STIME)
David Bainbridgee87067b2019-08-12 22:00:12 +00001209fi
Test Userba1e7e72019-07-10 22:27:54 +00001210
David Bainbridge99ac7a22019-08-31 02:26:43 +00001211STIME=$(date +%s)
1212bspin "Verify or download chart specific values files $DOWNLOAD"
1213VALUES_FILES="monkey-values.yaml"
David K. Bainbridgea00736b2020-01-08 14:33:17 -08001214ERR_OUT=$(mktemp)
David Bainbridge99ac7a22019-08-31 02:26:43 +00001215for i in $VALUES_FILES; do
1216 if [ ! -r ./$i ]; then
David K. Bainbridgea00736b2020-01-08 14:33:17 -08001217 (set -x; curl --fail -o ./$i -sSL https://raw.githubusercontent.com/ciena/kind-voltha/$VK_RELEASE/$i >>$LOG 2>$ERR_OUT) >>$LOG 2>&1
1218 if [ $? -ne 0 ]; then
1219 espin $THEX
1220 echo -e "${RED}${BOLD}${ERROR}ERROR: $i${NORMAL}${RED} - $(cat $ERR_OUT)${NORMAL}"
1221 echo "ERROR: $i - $(cat $ERR_OUT)" >>$LOG
1222 rm -rf $ERR_OUT ./$i
1223 exit 1
1224 fi
1225 rm -rf $ERR_OUT
David Bainbridge99ac7a22019-08-31 02:26:43 +00001226 fi
1227done
David Bainbridge1cecba52020-03-30 09:43:10 -07001228rm -rf $ERR_OUT
David Bainbridge99ac7a22019-08-31 02:26:43 +00001229espin $VERIFIED
1230if [ "$WITH_TIMINGS" == "yes" ]; then
1231 printtime $(expr $(date +%s) - $STIME)
1232fi
1233
1234if [ "$WITH_CHAOS" == "yes" ]; then
1235 bspin "Verify or clone kube-monkey helm chart $DOWNLOAD"
1236 if [ -r ./kube-monkey ]; then
1237 espin $VERIFIED
1238 else
1239 espin $NOT_VERIFIED
1240 bspin - "GIT clone kube-monkey"
1241 (set -x; git clone https://github.com/asobti/kube-monkey kube-monkey >>$LOG 2>&1) >>$LOG 2>&1
1242 espin - $VERIFIED
1243 fi
1244fi
1245
Test Userba1e7e72019-07-10 22:27:54 +00001246if [ "$JUST_K8S" == "yes" ]; then
1247 echo "Environment deployed, not deploying VOLTHA artifacts as requested. Good bye."
1248 echo ""
1249 echo "Please issue the following commands in your terminal to ensure that you" | tee -a $LOG
1250 echo "are accessing the correct Kubernetes/Kind cluster as well as have the " | tee -a $LOG
1251 echo "tools required by VOLTHA in your command path. " | tee -a $LOG
1252 echo "" | tee -a $LOG
1253 echo -en $BOLD
1254 if [ $DEPLOY_K8S == "yes" ]; then
David Bainbridge0774b232019-08-02 06:37:19 +00001255 echo "export KUBECONFIG=\"\$(./bin/kind get kubeconfig-path --name=\"voltha-$NAME\")\"" | tee -a $LOG
Test Userba1e7e72019-07-10 22:27:54 +00001256 fi
1257 echo "export PATH=$GOPATH/bin:\$PATH" | tee -a $LOG
1258 echo -en $NORMAL
1259 echo "" | tee -a $LOG
1260 echo "Thank you for choosing kind-voltha for you quick cluster needs." | tee -a $LOG
1261 exit 0
1262fi
1263
David Bainbridge696bc632020-04-05 21:49:37 -07001264if [ $WITH_ETCD != "yes" ]; then
1265 bspin "Skip ETCD Operator Deployment"
1266 espin $NO_ENTRY
David K. Bainbridgeb7285432019-07-02 22:05:24 -07001267else
David Bainbridge696bc632020-04-05 21:49:37 -07001268 STIME=$(date +%s)
1269 bspin "Verify ETCD Operator $OLD_KEY"
1270 if [ $(helm list --deployed --short --namespace voltha "^etcd-operator\$" | wc -l) -ne 1 ]; then
1271 espin $NOT_VERIFIED
1272 helm_install - voltha etcd-operator stable/etcd-operator latest "Install ETCD Operator"
1273 else
1274 espin $VERIFIED
1275 fi
1276 EXPECT=$(test "$TYPE" == "minimal" && echo "1" || echo "3")
1277 wait_for_pods - "voltha" $EXPECT "includes" -1 "Waiting for ETCD Operator to start" "etcd-operator-.*"
1278 if [ "$WITH_TIMINGS" == "yes" ]; then
1279 printtime $(expr $(date +%s) - $STIME)
1280 fi
David Bainbridgee87067b2019-08-12 22:00:12 +00001281fi
David K. Bainbridgeb7285432019-07-02 22:05:24 -07001282
David Bainbridgee87067b2019-08-12 22:00:12 +00001283STIME=$(date +%s)
David Bainbridgeb270c202019-07-26 01:44:42 +00001284if [ $WITH_ONOS == "yes" ]; then
1285 bspin "Verify ONOS installed $BIRD"
1286 if [ $(helm list --deployed --short --namespace default "^onos\$" | wc -l) -ne 1 ]; then
1287 espin $NOT_VERIFIED
David K. Bainbridgeda33d652020-03-06 10:31:23 -08001288 EXTRA_HELM_FLAGS="$SET_TAG $EXTRA_HELM_FLAGS" helm_install - default onos $ONOS_CHART $ONOS_CHART_VERSION "Install ONOS"
David Bainbridgeb270c202019-07-26 01:44:42 +00001289 else
1290 espin $VERIFIED
1291 fi
David Bainbridge4f1b5562019-08-19 04:46:52 +00001292 wait_for_pods - "default" 1 "includes" -1 "Waiting for ONOS to start" "onos-.*"
Matteo Scandolo7ef6ba52019-10-04 09:20:37 -07001293
David K. Bainbridge4a06a4a2020-03-02 14:15:23 -08001294 if [ $WITH_PORT_FORWARDS == "yes" ]; then
1295 bspin - "Forward ONOS API port $FORWARD"
1296 kill_port_forward onos-ui
1297 port_forward default onos-ui $ONOS_API_PORT 8181
1298 espin - $VERIFIED
1299 bspin - "Forward ONOS SSH port $FORWARD"
1300 kill_port_forward onos-ssh
1301 port_forward default onos-ssh $ONOS_SSH_PORT 8101
1302 espin - $VERIFIED
1303 _ONOS_API_EP="127.0.0.1:$ONOS_API_PORT"
1304 else
1305 _ONOS_API_EP=$(get_service_ep default onos-ui)
1306 fi
David Bainbridged31d6122019-08-13 19:37:59 +00001307 bspin - "Verify or download ONOS configuration support files $DOWNLOAD"
Matteo Scandolo78dfee02020-02-13 16:18:03 -08001308 ONOS_FILES="olt-onos-enableExtraneousRules.json onos-aaa.json \
David Bainbridge696bc632020-04-05 21:49:37 -07001309 onos-dhcpl2relay.json onos-sadis-sample.json"
David Bainbridged31d6122019-08-13 19:37:59 +00001310 (set -x; mkdir -p ./onos-files >>$LOG 2>&1) >>$LOG 2>&1
David K. Bainbridgea00736b2020-01-08 14:33:17 -08001311 ERR_OUT=$(mktemp)
David Bainbridge2b19e832019-08-16 02:40:53 +00001312 for i in $ONOS_FILES; do
David Bainbridged31d6122019-08-13 19:37:59 +00001313 if [ ! -r ./onos-files/$i ]; then
David K. Bainbridgea00736b2020-01-08 14:33:17 -08001314 (set -x; curl --fail -o ./onos-files/$i -sSL https://raw.githubusercontent.com/ciena/kind-voltha/$VK_RELEASE/onos-files/$i >>$LOG 2>$ERR_OUT) >>$LOG 2>&1
1315 if [ $? -ne 0 ]; then
1316 espin - $THEX
1317 echo -e "${RED}${BOLD}${ERROR}ERROR: $i${NORMAL}${RED} - $(cat $ERR_OUT)${NORMAL}"
1318 echo "ERROR: $(cat $ERR_OUT)" >>$LOG
1319 rm -rf $ERR_OUT ./onos-files/$i
1320 exit 1
1321 fi
1322 rm -rf $ERR_OUT
David Bainbridged31d6122019-08-13 19:37:59 +00001323 fi
1324 done
David Bainbridge1cecba52020-03-30 09:43:10 -07001325 rm -rf $ERR_OUT
Test Userba1e7e72019-07-10 22:27:54 +00001326 espin - $VERIFIED
David Bainbridge27790d62019-08-13 22:43:19 +00001327
1328 if [ $INSTALL_ONOS_APPS == "yes" ]; then
1329 bspin - "Installing custom ONOS applications"
1330 if [ -x onos-files/onos-apps -a $(ls -1 onos-files/onos-apps/*.oar 2>/dev/null | wc -l) -gt 0 ]; then
1331 for OAR in $(ls -1 onos-files/onos-apps/*.oar); do
1332 sspin - "Installing custom ONOS applications - $OAR$CEOL"
David Bainbridge2b19e832019-08-16 02:40:53 +00001333 override_onos_app $OAR
David Bainbridge27790d62019-08-13 22:43:19 +00001334 done
1335 espin - "$VERIFIED Installing custom ONOS applications$CEOL"
1336 else
1337 espin - "$NOT_VERIFIED Installing custom ONOS applications - None Found"
1338 fi
1339 fi
Matteo Scandolo7ef6ba52019-10-04 09:20:37 -07001340
David Bainbridge696bc632020-04-05 21:49:37 -07001341 if [ $WITH_KAFKA != "no" ]; then
David Bainbridge837e8bd2020-04-06 13:17:14 -07001342 check_onos_app_active org.opencord.kafka
1343 _HOST=voltha-kafka.voltha.svc.cluster.local
1344 _PORT=9092
1345 if [ $WITH_KAFKA != "yes" ]; then
1346 _HOST=$(echo $WITH_KAFKA | cut -d: -f1)
1347 _PORT=$(echo $WITH_KAFKA | cut -s -d: -f2)
1348 _PORT=${_PORT:-9092}
1349 fi
1350 push_onos_config "json" "Push ONOS Kafka Configuration" "network/configuration/apps/org.opencord.kafka" \
1351 "$(echo $(cat <<EOJ
David Bainbridge696bc632020-04-05 21:49:37 -07001352{
1353 "kafka": {
1354 "bootstrapServers": "$_HOST:$_PORT"
1355 }
1356}
1357EOJ
1358) | tr -d '[:space:]')"
David Bainbridge837e8bd2020-04-06 13:17:14 -07001359 fi
Matteo Scandolo9a77a732020-01-09 14:24:12 -08001360 check_onos_app_active org.opencord.dhcpl2relay
Matteo Scandolo78dfee02020-02-13 16:18:03 -08001361 push_onos_config "file" "Push ONOS DHCP L2 Relay Configuration" "network/configuration/apps/org.opencord.dhcpl2relay" "onos-files/onos-dhcpl2relay.json"
Matteo Scandolo9a77a732020-01-09 14:24:12 -08001362 check_onos_app_active org.opencord.olt
Matteo Scandolo78dfee02020-02-13 16:18:03 -08001363 # FIXME use WITH_DHCP and WITH_EAPOL flags to configre OLT App
Hardik Windlassa7501fb2020-02-17 14:28:20 +00001364 # Default value for "enableEapol" is true in OLT App
Matteo Scandolo78dfee02020-02-13 16:18:03 -08001365 if [ $WITH_EAPOL == "yes" ]; then
1366 push_onos_config "json" "Enable VOLTHA ONOS EAPOL provisioning" "configuration/org.opencord.olt.impl.OltFlowService" '{"enableEapol":true}'
Hardik Windlassa7501fb2020-02-17 14:28:20 +00001367 elif [ $WITH_EAPOL == "no" ]; then
1368 push_onos_config "json" "Disable VOLTHA ONOS EAPOL provisioning" "configuration/org.opencord.olt.impl.OltFlowService" '{"enableEapol":false}'
Matteo Scandolo78dfee02020-02-13 16:18:03 -08001369 fi
Hardik Windlassa7501fb2020-02-17 14:28:20 +00001370 # Default value for "enableDhcpOnProvisioning" is false and for "enableDhcpV4" is true in OLT App
Matteo Scandolo78dfee02020-02-13 16:18:03 -08001371 if [ $WITH_DHCP == "yes" ]; then
1372 push_onos_config "json" "Enable VOLTHA ONOS DHCP provisioning" "configuration/org.opencord.olt.impl.OltFlowService" '{"enableDhcpOnProvisioning":true,"enableDhcpV4":true}'
Hardik Windlassa7501fb2020-02-17 14:28:20 +00001373 elif [ $WITH_DHCP == "no" ]; then
1374 push_onos_config "json" "Disable VOLTHA ONOS DHCP provisioning" "configuration/org.opencord.olt.impl.OltFlowService" '{"enableDhcpOnProvisioning":false,"enableDhcpV4":false}'
Matteo Scandolo78dfee02020-02-13 16:18:03 -08001375 fi
Hardik Windlassa7501fb2020-02-17 14:28:20 +00001376 # Default value for "enableIgmpOnProvisioning" is false in OLT App
Matteo Scandolo78dfee02020-02-13 16:18:03 -08001377 if [ $WITH_IGMP == "yes" ]; then
1378 push_onos_config "json" "Enable VOLTHA ONOS IGMP provisioning" "configuration/org.opencord.olt.impl.OltFlowService" '{"enableIgmpOnProvisioning":true}'
Hardik Windlassa7501fb2020-02-17 14:28:20 +00001379 elif [ $WITH_IGMP == "no" ]; then
1380 push_onos_config "json" "Disable VOLTHA ONOS IGMP provisioning" "configuration/org.opencord.olt.impl.OltFlowService" '{"enableIgmpOnProvisioning":false}'
Matteo Scandolo78dfee02020-02-13 16:18:03 -08001381 fi
David K. Bainbridge484d80c2020-03-05 21:44:34 -08001382 if [ $ENABLE_ONOS_EXTRANEOUS_RULES == "yes" ]; then
1383 push_onos_config "file" "Enabling extraneous rules for ONOS" "configuration/org.onosproject.net.flow.impl.FlowRuleManager" "onos-files/olt-onos-enableExtraneousRules.json"
1384 fi
David K. Bainbridgeb859e912020-03-13 14:07:52 -07001385 if [ $(echo ":yes:file:" | grep -c ":$CONFIG_SADIS:") -eq 1 ]; then
Matteo Scandolo9a77a732020-01-09 14:24:12 -08001386 check_onos_app_active org.opencord.sadis
Hardik Windlassb3147602020-03-09 16:59:15 +05301387 push_onos_config "file" "[optional] Push ONOS SADIS Configuration: $SADIS_CFG" "network/configuration/apps/org.opencord.sadis" "$SADIS_CFG"
David K. Bainbridgeb859e912020-03-13 14:07:52 -07001388 elif [ "$CONFIG_SADIS" == "bbsim" ]; then
1389 push_onos_config "json" \
1390 "[optional] Push ONOS configuration for BBSIM SADIS servers" \
1391 "network/configuration/apps/org.opencord.sadis" \
1392 "$(echo $(cat <<EOJ
1393{
1394 "sadis": {
1395 "integration": {
1396 "url": "http://bbsim.voltha.svc.cluster.local:50074/v2/subscribers/%s",
1397 "cache": {
1398 "enabled": true,
1399 "maxsize": 50,
1400 "ttl": "PT1m"
1401 }
1402 }
1403 },
1404 "bandwidthprofile": {
1405 "integration": {
1406 "url": "http://bbsim.voltha.svc.cluster.local:50074/v2/bandwidthprofiles/%s",
1407 "cache": {
1408 "enabled": true,
1409 "maxsize": 50,
1410 "ttl": "PT1m"
1411 }
1412 }
1413 }
1414}
1415EOJ
1416) | tr -d '[:space:]')"
1417 elif [ "$CONFIG_SADIS" == "url" ]; then
1418 push_onos_config "json" \
1419 "[optional] Push ONOS configuration for custom SADIS and Bandwidth Profile servers" \
1420 "network/configuration/apps/org.opencord.sadis" \
1421 "$(echo $(cat <<EOJ
1422{
1423 "sadis": {
1424 "integration": {
1425 "url": "$SADIS_SUBSCRIBERS",
1426 "cache": {
1427 "enabled": true,
1428 "maxsize": 50,
1429 "ttl": "PT1m"
1430 }
1431 }
1432 },
1433 "bandwidthprofile": {
1434 "integration": {
1435 "url": "$SADIS_BANDWIDTH_PROFILES",
1436 "cache": {
1437 "enabled": true,
1438 "maxsize": 50,
1439 "ttl": "PT1m"
1440 }
1441 }
1442 }
1443}
1444EOJ
1445) | tr -d '[:space:]')"
David Bainbridge2b19e832019-08-16 02:40:53 +00001446 fi
Test Userba1e7e72019-07-10 22:27:54 +00001447fi
David Bainbridgee87067b2019-08-12 22:00:12 +00001448if [ "$WITH_TIMINGS" == "yes" ]; then
David Bainbridge712afb82019-08-14 19:55:58 +00001449 printtime $(expr $(date +%s) - $STIME)
David Bainbridgee87067b2019-08-12 22:00:12 +00001450fi
Test Userba1e7e72019-07-10 22:27:54 +00001451
David Bainbridgee87067b2019-08-12 22:00:12 +00001452STIME=$(date +%s)
David Bainbridge696bc632020-04-05 21:49:37 -07001453EXPECT=1
1454if [ "$ONLY_ONE" == "yes" ]; then
1455 EXPECT=$((EXPECT+1))
1456 INTERNAL_EXTRA_HELM_INSTALL_ARGS="--set therecanbeonlyone=true"
1457else
1458 EXPECT=$((EXPECT+2))
1459fi
1460if [ $WITH_ETCD != "yes" ]; then
1461 INTERNAL_EXTRA_HELM_INSTALL_ARGS+=" --set private_etcd_cluster=false"
1462 if [ $WITH_ETCD != "no" ]; then
1463 _HOST=$(echo $WITH_ETCD | cut -d: -f1)
1464 _PORT=$(echo $WITH_ETCD | cut -s -d: -f2)
1465 _PORT=${_PORT:-2379}
1466 INTERNAL_EXTRA_HELM_INSTALL_ARGS+=" --set services.etcd.service=$_HOST --set services.etcd.port=$_PORT"
1467 fi
1468else
1469 if [ $TYPE == "minimal" ]; then
1470 EXPECT=$((EXPECT+1))
1471 else
1472 EXPECT=$((EXPECT+3))
1473 fi
1474fi
1475if [ $WITH_KAFKA != "yes" ]; then
1476 INTERNAL_EXTRA_HELM_INSTALL_ARGS+=" --set private_kafka_cluster=false"
1477 if [ $WITH_KAFKA != "no" ]; then
1478 _HOST=$(echo $WITH_KAFKA | cut -d: -f1)
1479 _PORT=$(echo $WITH_KAFKA | cut -s -d: -f2)
1480 _PORT=${_PORT:-9092}
1481 INTERNAL_EXTRA_HELM_INSTALL_ARGS+=" --set kafka_broker=$_HOST:$_PORT --set services.kafka.adapter.service=$_HOST --set services.kafka.adapter.port=$_PORT --set services.kafka.cluster.service=$_HOST --set services.kafka.cluster.port=$_PORT"
1482 fi
1483else
1484 if [ $TYPE == "minimal" ]; then
1485 EXPECT=$((EXPECT+2))
1486 else
1487 EXPECT=$((EXPECT+6))
1488 fi
1489fi
Test Userb5712372019-07-03 21:52:17 +00001490bspin "Verify VOLTHA installed $HIGH_VOLTAGE"
Test User7d866122019-07-09 17:52:35 +00001491if [ $(helm list --deployed --short --namespace voltha "^voltha\$" | wc -l) -ne 1 ]; then
David K. Bainbridgeb7285432019-07-02 22:05:24 -07001492 espin $NOT_VERIFIED
David Bainbridge90fd8e32019-08-21 23:32:47 +00001493 helm_install - voltha voltha $VOLTHA_CHART $VOLTHA_CHART_VERSION "Install VOLTHA Core"
David K. Bainbridgeb7285432019-07-02 22:05:24 -07001494else
1495 espin $VERIFIED
1496fi
David Bainbridge696bc632020-04-05 21:49:37 -07001497INTERNAL_EXTRA_HELM_INSTALL_ARGS=
Test Userba1e7e72019-07-10 22:27:54 +00001498
David Bainbridge90fd8e32019-08-21 23:32:47 +00001499VOLTHA="voltha-ofagent-.* \
David K. Bainbridgeb7285432019-07-02 22:05:24 -07001500 ro-core.* \
1501 rw-core.* \
1502 voltha-api-server-.* \
David K. Bainbridgeb7285432019-07-02 22:05:24 -07001503 voltha-etcd-cluster-.* \
1504 voltha-kafka-.* \
1505 voltha-zookeeper-.*"
David Bainbridge4f1b5562019-08-19 04:46:52 +00001506wait_for_pods - "voltha" $EXPECT "includes" -1 "Waiting for VOLTHA Core to start" $VOLTHA
David Bainbridgee87067b2019-08-12 22:00:12 +00001507if [ "$WITH_TIMINGS" == "yes" ]; then
David Bainbridge712afb82019-08-14 19:55:58 +00001508 printtime $(expr $(date +%s) - $STIME)
David Bainbridgee87067b2019-08-12 22:00:12 +00001509fi
David K. Bainbridgeb7285432019-07-02 22:05:24 -07001510
David Bainbridge46505fb2019-10-01 21:13:20 +00001511if [ "$WITH_ADAPTERS" == "yes" ]; then
1512 STIME=$(date +%s)
1513 EXPECT=0
David Bainbridge696bc632020-04-05 21:49:37 -07001514 if [ $WITH_ETCD != "yes" ]; then
1515 if [ $WITH_ETCD != "no" ]; then
1516 _HOST=$(echo $WITH_ETCD | cut -d: -f1)
1517 _PORT=$(echo $WITH_ETCD | cut -s -d: -f2)
1518 _PORT=${_PORT:-2379}
1519 INTERNAL_EXTRA_HELM_INSTALL_ARGS+=" --set services.etcd.service=$_HOST --set services.etcd.port=$_PORT"
1520 fi
1521 fi
1522 if [ $WITH_KAFKA != "yes" ]; then
1523 if [ $WITH_KAFKA != "no" ]; then
1524 _HOST=$(echo $WITH_KAFKA | cut -d: -f1)
1525 _PORT=$(echo $WITH_KAFKA | cut -s -d: -f2)
1526 _PORT=${_PORT:-9092}
1527 INTERNAL_EXTRA_HELM_INSTALL_ARGS+=" --set kafka_broker=$_HOST:$_PORT --set services.kafka.adapter.service=$_HOST --set services.kafka.adapter.port=$_PORT --set services.kafka.cluster.service=$_HOST --set services.kafka.cluster.port=$_PORT"
1528 fi
1529 fi
David Bainbridge46505fb2019-10-01 21:13:20 +00001530 echo -e "Verify Adapters $PLUG"
1531 if [ "$WITH_SIM_ADAPTERS" == "yes" ]; then
1532 bspin - "Verify Simulated Adapters installed"
1533 if [ $(helm list --deployed --short --namespace voltha "^sim\$" | wc -l) -ne 1 ]; then
1534 espin - $NOT_VERIFIED
1535 helm_install - voltha sim $VOLTHA_ADAPTER_SIM_CHART $VOLTHA_ADAPTER_SIM_CHART_VERSION "Install Simulated Adapters"
1536 else
1537 espin - $VERIFIED
1538 fi
1539 EXPECT=$(expr $EXPECT + 2)
1540 fi
Matteo Scandolo7ef6ba52019-10-04 09:20:37 -07001541
David Bainbridge46505fb2019-10-01 21:13:20 +00001542 if [ "$WITH_OPEN_ADAPTERS" == "yes" ]; then
1543 bspin - "Verify OpenOLT Adapter installed"
1544 if [ $(helm list --deployed --short --namespace voltha "^open-olt\$" | wc -l) -ne 1 ]; then
1545 espin - $NOT_VERIFIED
1546 helm_install - voltha open-olt $VOLTHA_ADAPTER_OPEN_OLT_CHART $VOLTHA_ADAPTER_OPEN_OLT_CHART_VERSION "Install OpenOLT Adapter"
1547 else
1548 espin - $VERIFIED
1549 fi
1550 bspin - "Verify OpenONU Adapter installed"
1551 if [ $(helm list --deployed --short --namespace voltha "^open-onu\$" | wc -l) -ne 1 ]; then
1552 espin - $NOT_VERIFIED
1553 helm_install - voltha open-onu $VOLTHA_ADAPTER_OPEN_ONU_CHART $VOLTHA_ADAPTER_OPEN_ONU_CHART_VERSION "Install OpenONU Adapter"
1554 else
1555 espin - $VERIFIED
1556 fi
1557 EXPECT=$(expr $EXPECT + 2)
1558 fi
David Bainbridge696bc632020-04-05 21:49:37 -07001559 INTERNAL_EXTRA_HELM_INSTALL_ARGS=
Matteo Scandolo7ef6ba52019-10-04 09:20:37 -07001560
David Bainbridge46505fb2019-10-01 21:13:20 +00001561 ADAPTERS="adapter-.*"
1562 wait_for_pods - "voltha" $EXPECT "includes" -1 "Waiting for adapters to start" $ADAPTERS
1563 if [ "$WITH_TIMINGS" == "yes" ]; then
1564 printtime $(expr $(date +%s) - $STIME)
1565 fi
David Bainbridgee87067b2019-08-12 22:00:12 +00001566fi
David K. Bainbridgeb7285432019-07-02 22:05:24 -07001567
Test User7d866122019-07-09 17:52:35 +00001568if [ $WITH_BBSIM == "yes" ]; then
David Bainbridgee87067b2019-08-12 22:00:12 +00001569 STIME=$(date +%s)
Test User7d866122019-07-09 17:52:35 +00001570 echo -e "Verify BBSIM $PLUG"
David Bainbridge5b7b96b2019-07-25 20:29:13 +00001571 bspin - "Verify BBSIM Installed"
David K. Bainbridge43422402020-03-06 07:41:22 -08001572 for instance in $(seq 0 $(($NUM_OF_BBSIM-1))); do
1573 if [ $instance -eq 0 ]; then
1574 instance_num=""
1575 else
1576 instance_num=$instance
1577 fi
1578 if [ $(helm list --deployed --short --namespace voltha "^bbsim${instance_num}\$" | wc -l) -ne 1 ]; then
1579 espin - $NOT_VERIFIED
Matteo Scandolo5a149572020-04-01 10:14:57 -07001580 S_TAG=$((900+$instance))
1581 INTERNAL_EXTRA_HELM_INSTALL_ARGS="--set olt_id=$instance,s_tag=$S_TAG"
David K. Bainbridge43422402020-03-06 07:41:22 -08001582 helm_install - voltha bbsim${instance_num} $VOLTHA_BBSIM_CHART $VOLTHA_BBSIM_CHART_VERSION "Install BBSIM${instance_num}"
David Bainbridge2eaf2cf2020-03-18 12:54:08 -07001583 INTERNAL_EXTRA_HELM_INSTALL_ARGS=
David K. Bainbridge43422402020-03-06 07:41:22 -08001584 else
1585 espin - $VERIFIED
1586 fi
1587 done
uottrembb16d3982020-02-28 08:34:36 +01001588 wait_for_pods - "voltha" $NUM_OF_BBSIM "includes" -1 "Waiting for BBSIM to start" "bbsim*"
David Bainbridgee87067b2019-08-12 22:00:12 +00001589 if [ "$WITH_TIMINGS" == "yes" ]; then
David Bainbridge712afb82019-08-14 19:55:58 +00001590 printtime $(expr $(date +%s) - $STIME)
David Bainbridgee87067b2019-08-12 22:00:12 +00001591 fi
Test User7d866122019-07-09 17:52:35 +00001592fi
1593
David Bainbridge5b7b96b2019-07-25 20:29:13 +00001594if [ $WITH_RADIUS == "yes" ]; then
David Bainbridgee87067b2019-08-12 22:00:12 +00001595 STIME=$(date +%s)
David Bainbridge5b7b96b2019-07-25 20:29:13 +00001596 echo -e "Verify RADIUS $LOCK"
1597 bspin - "Verify RADIUS Installed"
1598 if [ $(helm list --deployed --short --namespace voltha "^radius\$" | wc -l) -ne 1 ]; then
1599 espin - $NOT_VERIFIED
David Bainbridge90fd8e32019-08-21 23:32:47 +00001600 helm_install - voltha radius onf/freeradius latest "Install RADIUS"
David Bainbridge5b7b96b2019-07-25 20:29:13 +00001601 else
1602 espin - $VERIFIED
1603 fi
David Bainbridge4f1b5562019-08-19 04:46:52 +00001604 wait_for_pods - "voltha" 1 "includes" -1 "Waiting for RADIUS to start" "radius-.*"
David Bainbridgee87067b2019-08-12 22:00:12 +00001605 if [ "$WITH_TIMINGS" == "yes" ]; then
David Bainbridge712afb82019-08-14 19:55:58 +00001606 printtime $(expr $(date +%s) - $STIME)
David Bainbridgee87067b2019-08-12 22:00:12 +00001607 fi
David Bainbridge5b7b96b2019-07-25 20:29:13 +00001608fi
1609
David K. Bainbridge4a06a4a2020-03-02 14:15:23 -08001610if [ $WITH_PORT_FORWARDS == "yes" ]; then
1611 STIME=$(date +%s)
1612 bspin - "Forward VOLTHA API port $FORWARD"
1613 kill_port_forward voltha-api
1614 port_forward voltha voltha-api $VOLTHA_API_PORT 55555
1615 espin - $VERIFIED
David Bainbridge696bc632020-04-05 21:49:37 -07001616 if [ $WITH_ETCD == "yes" ]; then
1617 bspin - "Forward VOLTHA ETCD port $FORWARD"
1618 kill_port_forward voltha-etcd-cluster-client
1619 port_forward voltha voltha-etcd-cluster-client $VOLTHA_ETCD_PORT 2379
1620 espin - $VERIFIED
1621 fi
1622 if [ $WITH_KAFKA == "yes" ]; then
1623 bspin - "Forward VOLTHA Kafka port $FORWARD"
1624 kill_port_forward voltha-kafka
1625 port_forward voltha voltha-kafka $VOLTHA_KAFKA_PORT 9092
1626 espin - $VERIFIED
1627 fi
David K. Bainbridge4a06a4a2020-03-02 14:15:23 -08001628 if [ "$WITH_TIMINGS" == "yes" ]; then
1629 printtime $(expr $(date +%s) - $STIME)
1630 fi
David Bainbridgee87067b2019-08-12 22:00:12 +00001631fi
Test User3d7ad8e2019-07-03 06:15:44 +00001632
David Bainbridge696bc632020-04-05 21:49:37 -07001633if [ $WITH_ONOS == "yes" -a $WITH_RADIUS != "no" ]; then
1634 _HOST=radius.voltha.svc.cluster.local
1635 _PORT=1812
1636 if [ $WITH_RADIUS != "yes" ]; then
1637 _HOST=$(echo $WITH_RADIUS | cut -d: -f1)
1638 _PORT=$(echo $WITH_RADIUS | cut -s -d: -f2)
1639 _PORT=${_PORT:-1812}
1640 fi
David Bainbridge5b7b96b2019-07-25 20:29:13 +00001641 bspin "Configure ONOS RADIUS Connection $GEAR"
David Bainbridge696bc632020-04-05 21:49:37 -07001642 (set -x; cat onos-files/onos-aaa.json | sed -e "s/:RADIUS_SVC:/$_HOST/g" -e "s/:RADIUS_PORT:/$_PORT/" | curl --fail -sSL --user karaf:karaf -X POST http://$_ONOS_API_EP/onos/v1/network/configuration/apps/org.opencord.aaa -H Content-type:application/json -d@- >>$LOG 2>&1) >>$LOG 2>&1
David Bainbridge5b7b96b2019-07-25 20:29:13 +00001643 espin $VERIFIED
1644fi
1645
David Bainbridge99ac7a22019-08-31 02:26:43 +00001646if [ "$WITH_CHAOS" == "yes" ]; then
1647 STIME=$(date +%s)
1648 echo -e "Verify kube-monkey $LOCK"
1649 bspin - "Verify kube-monkey Installed"
1650 if [ $(helm list --deployed --short --namespace kube-monkey "^monkey\$" | wc -l) -ne 1 ]; then
1651 espin - $NOT_VERIFIED
1652 helm_install - kube-monkey monkey ./kube-monkey/helm/kubemonkey latest "Install Chaos Monkey"
1653 else
1654 espin - $VERIFIED
1655 fi
1656 wait_for_pods - "kube-monkey" 1 "includes" -1 "Waiting for Chaos to start" "monkey-.*"
1657 if [ "$WITH_TIMINGS" == "yes" ]; then
1658 printtime $(expr $(date +%s) - $STIME)
1659 fi
1660fi
1661
David Bainbridge5b7b96b2019-07-25 20:29:13 +00001662bspin "Create voltctl configuration file"
Test User3d7ad8e2019-07-03 06:15:44 +00001663(set -x; mkdir -p $HOME/.volt >>$LOG 2>&1) >>$LOG 2>&1
David K. Bainbridgeb859e912020-03-13 14:07:52 -07001664MIN_VC_VERSION=$(echo -e "1.0.15\n$VC_VERSION" | sort -V | head -1)
David K. Bainbridge4a06a4a2020-03-02 14:15:23 -08001665if [ $WITH_PORT_FORWARDS == "yes" ]; then
David K. Bainbridgeb859e912020-03-13 14:07:52 -07001666 KAFKA_FLAG="-k localhost:$VOLTHA_KAFKA_PORT"
1667 SERVER_FLAG="-s localhost:$VOLTHA_API_PORT"
1668 ETCD_FLAG=
1669 if [ "$MIN_VC_VERSION" == "1.0.15" ]; then
1670 ETCD_FLAG="-e localhost:$VOLTHA_ETCD_PORT"
1671 fi
David K. Bainbridge4a06a4a2020-03-02 14:15:23 -08001672else
David K. Bainbridgeb859e912020-03-13 14:07:52 -07001673 KAFKA_FLAG="-k $(get_service_ep voltha voltha-kafka)"
1674 SERVER_FLAG="-s $(get_service_ep voltha voltha-api)"
1675 ETCD_FLAG=
1676 if [ "$MIN_VC_VERSION" == "1.0.15" ]; then
1677 ETCD_FLAG="-e $(get_service_ep voltha voltha-etcd-client)"
1678 fi
David K. Bainbridge4a06a4a2020-03-02 14:15:23 -08001679fi
David K. Bainbridgeb859e912020-03-13 14:07:52 -07001680(set -x; voltctl -a v3 $KAFKA_FLAG $SERVER_FLAG $ETCD_FLAG config > $HOME/.volt/config-$NAME 2>>$LOG) >>$LOG 2>&1
David Bainbridge5b7b96b2019-07-25 20:29:13 +00001681espin $VERIFIED
Test User08ebbd92019-07-03 17:15:39 +00001682
David Bainbridge0774b232019-08-02 06:37:19 +00001683if [ ! -f "$NAME-env.sh" ]; then
1684 touch $NAME-env.sh
David Bainbridgeb07fdf72019-07-29 22:51:40 +00001685fi
1686
David Bainbridge596f30d2019-07-30 17:07:59 +00001687for O in $ALL_OPTIONS; do
1688 VAL=$(eval echo \$$O)
David Bainbridge0774b232019-08-02 06:37:19 +00001689 if [ ! -z "$VAL" -a $(grep -c "^export $O=" $NAME-env.sh) -eq 0 ]; then
1690 echo "export $O=\"$(eval echo \$$O)\"" >> $NAME-env.sh
David Bainbridgeb07fdf72019-07-29 22:51:40 +00001691 fi
1692done
1693
David Bainbridge0774b232019-08-02 06:37:19 +00001694if [ $DEPLOY_K8S == "yes" -a $(grep -c "^export KUBECONFIG=" $NAME-env.sh) -eq 0 ]; then
1695 echo "export KUBECONFIG=\"$(./bin/kind get kubeconfig-path --name=voltha-$NAME)\"" >> $NAME-env.sh
David Bainbridgeb07fdf72019-07-29 22:51:40 +00001696fi
1697
David Bainbridge0774b232019-08-02 06:37:19 +00001698if [ $(grep -c "^export VOLTCONFIG=" $NAME-env.sh) -eq 0 ]; then
1699 echo "export VOLTCONFIG=\"$HOME/.volt/config-$NAME\"" >> $NAME-env.sh
David Bainbridgeb07fdf72019-07-29 22:51:40 +00001700fi
1701
David Bainbridge0774b232019-08-02 06:37:19 +00001702if [ $(grep -c "^export PATH=" $NAME-env.sh) -eq 0 ]; then
1703 echo "export PATH=\"$GOPATH/bin:\$PATH\"" >> $NAME-env.sh
David Bainbridgeb07fdf72019-07-29 22:51:40 +00001704fi
1705
Test User7d866122019-07-09 17:52:35 +00001706echo ""
Test User08ebbd92019-07-03 17:15:39 +00001707echo "Please issue the following commands in your terminal to ensure that you" | tee -a $LOG
1708echo "are accessing the correct Kubernetes/Kind cluster as well as have the " | tee -a $LOG
1709echo "tools required by VOLTHA in your command path. " | tee -a $LOG
1710echo "" | tee -a $LOG
Test User7d866122019-07-09 17:52:35 +00001711echo -en $BOLD
Test Userba1e7e72019-07-10 22:27:54 +00001712if [ $DEPLOY_K8S == "yes" ]; then
David Bainbridge0774b232019-08-02 06:37:19 +00001713 echo "export KUBECONFIG=\"\$(./bin/kind get kubeconfig-path --name=\"voltha-$NAME\")\"" | tee -a $LOG
Test Userba1e7e72019-07-10 22:27:54 +00001714fi
David Bainbridge0774b232019-08-02 06:37:19 +00001715echo "export VOLTCONFIG=\"$HOME/.volt/config-$NAME\"" | tee -a $LOG
Test Userba1e7e72019-07-10 22:27:54 +00001716echo "export PATH=$GOPATH/bin:\$PATH" | tee -a $LOG
Test User7d866122019-07-09 17:52:35 +00001717echo -en $NORMAL
Test User08ebbd92019-07-03 17:15:39 +00001718echo "" | tee -a $LOG
1719echo "Thank you for choosing kind-voltha for you quick cluster needs." | tee -a $LOG
1720
David Bainbridge712afb82019-08-14 19:55:58 +00001721if [ "$WITH_TIMINGS" == "yes" ]; then
David Bainbridgef858a022019-08-14 21:25:11 +00001722 echo -e "$CLOCK ${BOLD}TOTAL: $(duration $(expr $(date +%s) - $TOTAL_START_TIME))${NORMAL}"
David Bainbridge712afb82019-08-14 19:55:58 +00001723fi