blob: 6193a613854e327543cb0d79e78efa3610dd86a0 [file] [log] [blame]
Gayathri.Selvan283a63c2020-01-23 04:09:18 +00001# Copyright 2017 - present Open Networking Foundation
2#
3# Licensed under the Apache License, Version 2.0 (the "License");
4# you may not use this file except in compliance with the License.
5# You may obtain a copy of the License at
6#
7# http://www.apache.org/licenses/LICENSE-2.0
8#
9# Unless required by applicable law or agreed to in writing, software
10# distributed under the License is distributed on an "AS IS" BASIS,
11# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
12# See the License for the specific language governing permissions and
13# limitations under the License.
Gayathri.Selvan283a63c2020-01-23 04:09:18 +000014
15*** Settings ***
HungWei Chiu87edb1f2020-01-28 00:10:58 +000016Documentation Test various failure scenarios
HungWei Chiu1408fb92020-03-03 19:43:30 -050017Suite Setup Setup Suite
Gayathri.Selvan283a63c2020-01-23 04:09:18 +000018Test Setup Setup
19Test Teardown Teardown
20#Suite Teardown Teardown Suite
21Library Collections
22Library String
23Library OperatingSystem
24Library XML
25Library RequestsLibrary
26Library ../../libraries/DependencyLibrary.py
27Resource ../../libraries/onos.robot
28Resource ../../libraries/voltctl.robot
29Resource ../../libraries/voltha.robot
30Resource ../../libraries/utils.robot
31Resource ../../libraries/k8s.robot
32Resource ../../variables/variables.robot
HungWei Chiu87edb1f2020-01-28 00:10:58 +000033Resource ../../libraries/power_switch.robot
Gayathri.Selvan283a63c2020-01-23 04:09:18 +000034
35*** Variables ***
36${POD_NAME} flex-ocp-cord
37${KUBERNETES_CONF} ${KUBERNETES_CONFIGS_DIR}/${POD_NAME}.conf
38${KUBERNETES_CONFIGS_DIR} ~/pod-configs/kubernetes-configs
39#${KUBERNETES_CONFIGS_DIR} ${KUBERNETES_CONFIGS_DIR}/${POD_NAME}.conf
40${KUBERNETES_YAML} ${KUBERNETES_CONFIGS_DIR}/${POD_NAME}.yml
41${HELM_CHARTS_DIR} ~/helm-charts
42${VOLTHA_POD_NUM} 8
43${NAMESPACE} voltha
Suchitra Vemurica1c5d32020-04-09 18:45:29 -070044${DEFAULTSPACE} default
Gayathri.Selvan283a63c2020-01-23 04:09:18 +000045# For below variable value, using deployment name as using grep for
46# parsing radius pod name, we can also use full radius pod name
47${RESTART_POD_NAME} radius
48${timeout} 60s
49${of_id} 0
50${logical_id} 0
Suchitra Vemuri109feb12020-01-23 16:25:02 -080051${has_dataplane} True
Gayathri.Selvan283a63c2020-01-23 04:09:18 +000052${teardown_device} False
53${scripts} ../../scripts
54
Andy Bavierabeba262020-02-07 16:22:16 -070055# Per-test logging on failure is turned off by default; set this variable to enable
56${container_log_dir} ${None}
57
Gayathri.Selvan283a63c2020-01-23 04:09:18 +000058*** Test Cases ***
Suchitra Vemuri60be98b2020-02-19 16:41:21 -080059Verify ONU after rebooting physically
60 [Documentation] Test the ONU functionality by physically turning on/off ONU.
61 ... Prerequisite : Subscriber are authenticated/DHCP/pingable state
62 ... Test case runs only on the PODs that are configured with PowerSwitch that
63 ... controls the power off/on ONUs/OLT remotely (simulating a physical reboot)
64 ... VOL-2634
65 [Tags] functional PowerSwitch
Andy Baviere187eda2020-04-20 15:00:02 -070066 [Setup] Start Logging ONUreboot_PowerSwitch
Suchitra Vemuri60be98b2020-02-19 16:41:21 -080067 [Teardown] Run Keywords Collect Logs
Suchitra Vemuri9a6dd6d2020-02-28 17:46:26 -080068 ... AND Stop Logging ONUreboot_PowerSwitch
Suchitra Vemuri0656bc22020-03-21 19:07:49 -070069 ... AND Delete Device and Verify
Suchitra Vemuri60be98b2020-02-19 16:41:21 -080070 # Add OLT device
71 setup
72 # Performing Sanity Test to make sure subscribers are all AUTH+DHCP and pingable
73 Run Keyword If ${has_dataplane} Clean Up Linux
74 Wait Until Keyword Succeeds ${timeout} 2s Perform Sanity Test
75 Power Switch Connection Suite ${web_power_switch.ip} ${web_power_switch.user} ${web_power_switch.password}
76 FOR ${I} IN RANGE 0 ${num_onus}
77 ${src}= Set Variable ${hosts.src[${I}]}
78 ${dst}= Set Variable ${hosts.dst[${I}]}
Hardik Windlass0560f802020-05-06 23:06:53 +053079 ${onu_device_id}= Get Device ID From SN ${src['onu']}
Suchitra Vemuri60be98b2020-02-19 16:41:21 -080080 ${onu_port}= Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s
81 ... Get ONU Port in ONOS ${src['onu']} ${of_id}
82 Disable Switch Outlet ${src['power_switch_port']}
83 Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure
84 ... Wait Until Keyword Succeeds 60s 2s
85 ... Check Ping False ${dst['dp_iface_ip_qinq']} ${src['dp_iface_name']}
86 ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
Hardik Windlass7c801e62020-05-04 19:33:21 +053087 # Remove Subscriber Access (To replicate ATT workflow)
88 Wait Until Keyword Succeeds ${timeout} 2s Execute ONOS CLI Command ${ONOS_SSH_IP}
89 ... ${ONOS_SSH_PORT} volt-remove-subscriber-access ${of_id} ${onu_port}
Suchitra Vemuri60be98b2020-02-19 16:41:21 -080090
91 Enable Switch Outlet ${src['power_switch_port']}
92 # Check ONU port is Enabled in ONOS
93 Run Keyword And Continue On Failure Wait Until Keyword Succeeds 120s 2s
Suchitra Vemuri760bdd32020-06-17 12:34:48 -070094 ... Verify ONU Port Is Enabled ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${src['onu']}
Suchitra Vemuri60be98b2020-02-19 16:41:21 -080095 # Verify EAPOL flows are added for the ONU port
96 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s
ubuntu6b6e7d42020-03-02 12:35:42 -080097 ... Verify Eapol Flows Added For ONU ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${onu_port}
Suchitra Vemuri60be98b2020-02-19 16:41:21 -080098 # Verify ONU state in voltha
99 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s Validate Device
100 ... ENABLED ACTIVE REACHABLE
101 ... ${src['onu']} onu=True onu_reason=omci-flows-pushed
Hardik Windlass7c801e62020-05-04 19:33:21 +0530102 Run Keyword If ${has_dataplane} Clean Up Linux
103 # Perform Authentication
104 ${wpa_log}= Run Keyword If ${has_dataplane} Catenate SEPARATOR=.
105 ... /tmp/wpa ${src['dp_iface_name']} log
106 Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure Validate Authentication True
107 ... ${src['dp_iface_name']} wpa_supplicant.conf ${src['ip']} ${src['user']} ${src['pass']}
108 ... ${src['container_type']} ${src['container_name']} ${wpa_log}
109 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2
110 ... Verify ONU in AAA-Users ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${onu_port}
111 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2
112 ... Execute ONOS CLI Command ${ONOS_SSH_IP} ${ONOS_SSH_PORT}
113 ... volt-add-subscriber-access ${of_id} ${onu_port}
114 # Verify that no pending flows exist for the ONU port
115 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s
116 ... Verify No Pending Flows For ONU ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${onu_port}
Hardik Windlass21807632020-04-14 16:24:55 +0530117 # Verify subscriber access flows are added for the ONU port
118 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
119 ... Verify Subscriber Access Flows Added For ONU ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${of_id}
120 ... ${onu_port} ${nni_port} ${src['c_tag']} ${src['s_tag']}
Hardik Windlass7c801e62020-05-04 19:33:21 +0530121 Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure Validate DHCP and Ping True
122 ... True ${src['dp_iface_name']} ${src['s_tag']} ${src['c_tag']} ${dst['dp_iface_ip_qinq']}
Suchitra Vemuri60be98b2020-02-19 16:41:21 -0800123 ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
Hardik Windlass7c801e62020-05-04 19:33:21 +0530124 ... ${dst['dp_iface_name']} ${dst['ip']} ${dst['user']} ${dst['pass']} ${dst['container_type']}
125 ... ${dst['container_name']}
126 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s
127 ... Validate Subscriber DHCP Allocation ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${onu_port}
128 Run Keyword and Ignore Error Get Device Output from Voltha ${onu_device_id}
Suchitra Vemuri60be98b2020-02-19 16:41:21 -0800129 Run Keyword And Ignore Error Collect Logs
130 END
Suchitra Vemurid7096132020-02-21 14:50:47 -0800131 # Deleting OLT after tests completes independently (as this test doesn't not run on each POD)
Suchitra Vemuri0656bc22020-03-21 19:07:49 -0700132 #Run Keyword If ${has_dataplane} Delete Device and Verify
Suchitra Vemuria7dae322020-02-19 22:38:18 -0800133
Suchitra Vemuri784e1ae2020-03-16 18:40:25 -0700134Verify OLT after rebooting physically
135 [Documentation] Test the physical reboot of the OLT
136 ... Prerequisite : Subscriber are authenticated/DHCP/pingable state
137 ... Test performs a physical reboot, performs "reboot" from the OLT CLI
138 ... VOL-1956
139 [Tags] functional PhysicalOLTReboot
Andy Baviere187eda2020-04-20 15:00:02 -0700140 [Setup] Start Logging PhysicalOLTReboot
Suchitra Vemuri784e1ae2020-03-16 18:40:25 -0700141 [Teardown] Run Keywords Collect Logs
142 ... AND Stop Logging PhysicalOLTReboot
Suchitra Vemurib3a92e42020-03-21 16:49:57 -0700143 ... AND Delete Device and Verify
Suchitra Vemuri784e1ae2020-03-16 18:40:25 -0700144 # Add OLT device
145 setup
146 # Performing Sanity Test to make sure subscribers are all AUTH+DHCP and pingable
147 Run Keyword If ${has_dataplane} Clean Up Linux
148 Wait Until Keyword Succeeds ${timeout} 2s Perform Sanity Test
149 # Reboot the OLT from the OLT CLI
150 Run Keyword If ${has_dataplane} Login And Run Command On Remote System
151 ... sudo reboot ${olt_ip} ${olt_user} ${olt_pass} prompt=#
152 Run Keyword And Ignore Error Collect Logs
153 FOR ${I} IN RANGE 0 ${num_onus}
154 ${src}= Set Variable ${hosts.src[${I}]}
155 ${dst}= Set Variable ${hosts.dst[${I}]}
156 Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure
157 ... Wait Until Keyword Succeeds 60s 2s
158 ... Check Ping False ${dst['dp_iface_ip_qinq']} ${src['dp_iface_name']}
159 ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
160 END
161 # Wait for the OLT to come back up
Andy Bavier8da0e132020-04-13 10:25:16 -0700162 Run Keyword If ${has_dataplane} Wait Until Keyword Succeeds 120s 10s
163 ... Check Remote System Reachability True ${olt_ip}
Suchitra Vemuri64db9652020-03-22 21:11:13 -0700164 # Waiting extra time for the ONUs to come up
165 Sleep 60s
Suchitra Vemuri784e1ae2020-03-16 18:40:25 -0700166 Run Keyword And Ignore Error Collect Logs
167 Run Keyword If ${has_dataplane} Clean Up Linux
168 Wait Until Keyword Succeeds ${timeout} 2s Perform Sanity Test
169 # Deleting OLT after test completes
Suchitra Vemurib3a92e42020-03-21 16:49:57 -0700170 #Run Keyword If ${has_dataplane} Delete Device and Verify
Suchitra Vemuri784e1ae2020-03-16 18:40:25 -0700171
Suchitra Vemuri05180cb2020-03-26 13:13:27 -0700172Verify restart openolt-adapter container after subscriber provisioning
Suchitra Vemuria7dae322020-02-19 22:38:18 -0800173 [Documentation] Restart openolt-adapter container after VOLTHA is operational.
174 ... Prerequisite : ONUs are authenticated and pingable.
Suchitra Vemurif7a033c2020-02-26 17:22:41 -0800175 [Tags] functional VOL-1958 Restart-OpenOlt released
Andy Baviere187eda2020-04-20 15:00:02 -0700176 [Setup] Start Logging Restart-OpenOlt
Suchitra Vemuria7dae322020-02-19 22:38:18 -0800177 [Teardown] Run Keywords Collect Logs
Suchitra Vemurif7a033c2020-02-26 17:22:41 -0800178 ... AND Stop Logging Restart-OpenOlt
Suchitra Vemuria7dae322020-02-19 22:38:18 -0800179 # Add OLT device
180 setup
181 # Performing Sanity Test to make sure subscribers are all AUTH+DHCP and pingable
182 Run Keyword If ${has_dataplane} Clean Up Linux
183 Wait Until Keyword Succeeds ${timeout} 2s Perform Sanity Test
184 ${waitforRestart} Set Variable 120s
185 ${podStatusOutput}= Run kubectl get pods -n ${NAMESPACE}
186 Log ${podStatusOutput}
187 ${countBforRestart}= Run kubectl get pods -n ${NAMESPACE} | grep Running | wc -l
Hardik Windlass79b40ff2020-06-11 22:55:47 +0530188 ${podName} Set Variable adapter-open-olt
189 Wait Until Keyword Succeeds ${timeout} 15s Delete K8s Pods By Label ${NAMESPACE} app ${podName}
190 Sleep 5s
191 Wait Until Keyword Succeeds ${timeout} 2s Validate Pods Status By Label ${NAMESPACE}
192 ... app ${podName} Running
Suchitra Vemuri312bfe02020-03-16 16:11:34 -0700193 # Wait for 1min after openolt adapter is restarted
194 Sleep 60s
Suchitra Vemuria7dae322020-02-19 22:38:18 -0800195 Repeat Sanity Test
Suchitra Vemurid7096132020-02-21 14:50:47 -0800196 Run Keyword and Ignore Error Collect Logs
Suchitra Vemuria7dae322020-02-19 22:38:18 -0800197 ${podStatusOutput}= Run kubectl get pods -n ${NAMESPACE}
198 Log ${podStatusOutput}
199 ${countAfterRestart}= Run kubectl get pods -n ${NAMESPACE} | grep Running | wc -l
200 Should Be Equal As Strings ${countAfterRestart} ${countBforRestart}
201 Log to console Pod ${podName} restarted and sanity checks passed successfully
Suchitra Vemuri60be98b2020-02-19 16:41:21 -0800202
Suchitra Vemurif7a033c2020-02-26 17:22:41 -0800203Check OLT/ONU Authentication After Radius Pod Restart
204 [Documentation] After radius restart, triggers reassociation, checks status and
205 ... authentication, validates dhcp and ping. Note : wpa reassociate works only when
206 ... wpa supplicant is running in background hence it is recommended to remove
207 ... teardown from previous test or uncomment 'Teardown None'.
208 ... Assuming that test1 was executed where all the ONUs are authenticated/DHCP/pingable
209 [Tags] functional RadiusRestart released
Andy Baviere187eda2020-04-20 15:00:02 -0700210 [Setup] Start Logging RadiusRestart
Suchitra Vemurif7a033c2020-02-26 17:22:41 -0800211 [Teardown] Run Keywords Collect Logs
212 ... AND Stop Logging RadiusRestart
Suchitra Vemurif7a033c2020-02-26 17:22:41 -0800213 ${waitforRestart} Set Variable 120s
Hardik Windlass79b40ff2020-06-11 22:55:47 +0530214 ${podName} Set Variable radius
215 Wait Until Keyword Succeeds ${timeout} 15s Delete K8s Pods By Label ${DEFAULTSPACE} app ${podName}
216 Sleep 5s
217 Wait Until Keyword Succeeds ${waitforRestart} 2s Validate Pods Status By Label ${DEFAULTSPACE}
218 ... app ${podName} Running
Suchitra Vemurif7a033c2020-02-26 17:22:41 -0800219 FOR ${I} IN RANGE 0 ${num_onus}
220 ${src}= Set Variable ${hosts.src[${I}]}
221 ${dst}= Set Variable ${hosts.dst[${I}]}
222 ${onu_device_id}= Get Device ID From SN ${src['onu']}
223 ${onu_port}= Wait Until Keyword Succeeds ${timeout} 2s
224 ... Get ONU Port in ONOS ${src['onu']} ${of_id}
225 Wait Until Keyword Succeeds ${timeout} 2s
ubuntu6b6e7d42020-03-02 12:35:42 -0800226 ... Verify Eapol Flows Added For ONU ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${onu_port}
Suchitra Vemurif7a033c2020-02-26 17:22:41 -0800227 Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure
228 ... Validate Authentication After Reassociate True ${src['dp_iface_name']}
229 ... ${src['ip']} ${src['user']} ${src['pass']}
230 ... ${src['container_type']} ${src['container_name']}
ubuntu6b6e7d42020-03-02 12:35:42 -0800231 Wait Until Keyword Succeeds ${timeout} 2s Verify ONU in AAA-Users ${ONOS_SSH_IP}
Suchitra Vemurif7a033c2020-02-26 17:22:41 -0800232 ... ${ONOS_SSH_PORT} ${onu_port}
233 Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure
234 ... Validate DHCP and Ping True True ${src['dp_iface_name']}
235 ... ${src['s_tag']} ${src['c_tag']} ${dst['dp_iface_ip_qinq']}
236 ... ${src['ip']} ${src['user']} ${src['pass']}
237 ... ${src['container_type']} ${src['container_name']}
238 ... ${dst['dp_iface_name']} ${dst['ip']} ${dst['user']}
239 ... ${dst['pass']} ${dst['container_type']} ${dst['container_name']}
240 Wait Until Keyword Succeeds ${timeout} 2s Run Keyword And Continue On Failure
ubuntu6b6e7d42020-03-02 12:35:42 -0800241 ... Validate Subscriber DHCP Allocation ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${onu_port}
Suchitra Vemurif7a033c2020-02-26 17:22:41 -0800242 Run Keyword and Ignore Error Get Device Output from Voltha ${onu_device_id}
243 Run Keyword and Ignore Error Collect Logs
244 END
245
Suchitra Vemuri05180cb2020-03-26 13:13:27 -0700246Verify openolt adapter restart before subscriber provisioning
Suchitra Vemurif7a033c2020-02-26 17:22:41 -0800247 [Documentation] Deploys an device instance and waits for it to authenticate. After
248 ... authentication is successful the rw-core deployment is scaled to 0 instances to
249 ... simulate a POD crash. The test then scales the rw-core back to a single instance
250 ... and configures ONOS for access. The test succeeds if the device is able to
251 ... complete the DHCP sequence.
Hung-Wei Chiud3576762020-03-25 18:06:26 -0700252 [Tags] functional olt-adapter-restart
Andy Baviere187eda2020-04-20 15:00:02 -0700253 [Setup] Start Logging OltAdapterRestart
Suchitra Vemuria0c086f2020-03-29 19:14:13 -0700254 #... AND Clear All Devices Then Create New Device
Suchitra Vemurif7a033c2020-02-26 17:22:41 -0800255 [Teardown] Run Keywords Collect Logs
256 ... AND Stop Logging OltAdapterRestart
Hung-Wei Chiud3576762020-03-25 18:06:26 -0700257 # Add OLT and perform sanity test
Suchitra Vemuri59ad2772020-03-26 22:27:27 -0700258 #setup
Suchitra Vemuri91537c82020-03-29 15:03:26 -0700259 Run Keyword If ${has_dataplane} Clean Up Linux
Suchitra Vemuri59ad2772020-03-26 22:27:27 -0700260 #Wait Until Keyword Succeeds ${timeout} 2s Perform Sanity Test
Suchitra Vemurif7a033c2020-02-26 17:22:41 -0800261 Set Global Variable ${of_id}
262
263 FOR ${I} IN RANGE 0 ${num_onus}
264 ${src}= Set Variable ${hosts.src[${I}]}
265 ${dst}= Set Variable ${hosts.dst[${I}]}
266 ${onu_device_id}= Get Device ID From SN ${src['onu']}
267 ${onu_port}= Wait Until Keyword Succeeds ${timeout} 2s Get ONU Port in ONOS ${src['onu']}
268 ... ${of_id}
269
270 # Bring up the device and verify it authenticates
271 Wait Until Keyword Succeeds ${timeout} 5s Validate Device ENABLED ACTIVE REACHABLE
272 ... ${onu_device_id} onu=True onu_reason=omci-flows-pushed
ubuntu6b6e7d42020-03-02 12:35:42 -0800273 Wait Until Keyword Succeeds ${timeout} 2s Verify Eapol Flows Added For ONU ${ONOS_SSH_IP}
Suchitra Vemurif7a033c2020-02-26 17:22:41 -0800274 ... ${ONOS_SSH_PORT} ${onu_port}
Andy Bavier84834d42020-02-25 13:49:50 -0700275 ${wpa_log}= Run Keyword If ${has_dataplane} Catenate SEPARATOR=.
276 ... /tmp/wpa ${src['dp_iface_name']} log
Suchitra Vemurif7a033c2020-02-26 17:22:41 -0800277 Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure Validate Authentication True
278 ... ${src['dp_iface_name']} wpa_supplicant.conf ${src['ip']} ${src['user']} ${src['pass']}
Andy Bavier84834d42020-02-25 13:49:50 -0700279 ... ${src['container_type']} ${src['container_name']} ${wpa_log}
ubuntu6b6e7d42020-03-02 12:35:42 -0800280 Wait Until Keyword Succeeds ${timeout} 2s Verify ONU in AAA-Users ${ONOS_SSH_IP}
Suchitra Vemurif7a033c2020-02-26 17:22:41 -0800281 ... ${ONOS_SSH_PORT} ${onu_port}
282 END
283 # Scale down the open OLT adapter deployment to 0 PODs and once confirmed, scale it back to 1
Hardik Windlass79b40ff2020-06-11 22:55:47 +0530284 Scale K8s Deployment voltha open-olt-voltha-adapter-openolt 0
285 Wait Until Keyword Succeeds ${timeout} 2s Pod Does Not Exist voltha open-olt-voltha-adapter-openolt
Suchitra Vemurif7a033c2020-02-26 17:22:41 -0800286 # Scale up the open OLT adapter deployment and make sure both it and the ofagent deployment are back
Hardik Windlass79b40ff2020-06-11 22:55:47 +0530287 Scale K8s Deployment voltha open-olt-voltha-adapter-openolt 1
Suchitra Vemurif7a033c2020-02-26 17:22:41 -0800288 Wait Until Keyword Succeeds ${timeout} 2s
Hardik Windlass79b40ff2020-06-11 22:55:47 +0530289 ... Check Expected Available Deployment Replicas voltha open-olt-voltha-adapter-openolt 1
Suchitra Vemurif7a033c2020-02-26 17:22:41 -0800290
291 # Ensure the device is available in ONOS, this represents system connectivity being restored
292 Wait Until Keyword Succeeds ${timeout} 2s Device Is Available In ONOS
ubuntu6b6e7d42020-03-02 12:35:42 -0800293 ... http://karaf:karaf@${ONOS_REST_IP}:${ONOS_REST_PORT} ${of_id}
Suchitra Vemurif7a033c2020-02-26 17:22:41 -0800294
295 FOR ${I} IN RANGE 0 ${num_onus}
296 # Add subscriber access and verify that DHCP completes to ensure system is still functioning properly
ubuntu6b6e7d42020-03-02 12:35:42 -0800297 Wait Until Keyword Succeeds ${timeout} 2s Execute ONOS CLI Command ${ONOS_SSH_IP}
Suchitra Vemurif7a033c2020-02-26 17:22:41 -0800298 ... ${ONOS_SSH_PORT} volt-add-subscriber-access ${of_id} ${onu_port}
Hardik Windlass21807632020-04-14 16:24:55 +0530299 # Verify subscriber access flows are added for the ONU port
300 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
301 ... Verify Subscriber Access Flows Added For ONU ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${of_id}
302 ... ${onu_port} ${nni_port} ${src['c_tag']} ${src['s_tag']}
Suchitra Vemurif7a033c2020-02-26 17:22:41 -0800303 Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure Validate DHCP and Ping True
304 ... True ${src['dp_iface_name']} ${src['s_tag']} ${src['c_tag']} ${dst['dp_iface_ip_qinq']}
305 ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
306 ... ${dst['dp_iface_name']} ${dst['ip']} ${dst['user']} ${dst['pass']} ${dst['container_type']}
307 ... ${dst['container_name']}
308 Wait Until Keyword Succeeds ${timeout} 2s Run Keyword And Continue On Failure
ubuntu6b6e7d42020-03-02 12:35:42 -0800309 ... Validate Subscriber DHCP Allocation ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${onu_port}
Suchitra Vemurif7a033c2020-02-26 17:22:41 -0800310 END
311
hwchiu14c05102020-03-27 00:44:30 +0000312Verify restart ofagent container after subscriber is provisioned
Gayathri.Selvanb6a2b542020-01-24 07:24:23 +0000313 [Documentation] Restart ofagent container after VOLTHA is operational.
Gayathri.Selvanb6a2b542020-01-24 07:24:23 +0000314 ... Prerequisite : ONUs are authenticated and pingable.
Hardik Windlass7a846662020-03-19 20:42:59 +0530315 [Tags] functional VOL-2409 ofagentRestart
Andy Baviere187eda2020-04-20 15:00:02 -0700316 [Setup] Start Logging ofagentRestart
Andy Bavier4a8450e2020-02-04 08:58:37 -0700317 [Teardown] Run Keywords Collect Logs
Andy Bavierabeba262020-02-07 16:22:16 -0700318 ... AND Stop Logging ofagentRestart
Hardik Windlass79b40ff2020-06-11 22:55:47 +0530319 ... AND Scale K8s Deployment ${NAMESPACE} voltha-voltha-ofagent 1
Suchitra Vemuriceb002a2020-03-25 13:36:21 -0700320 # set timeout value
Gayathri.Selvanb6a2b542020-01-24 07:24:23 +0000321 ${waitforRestart} Set Variable 120s
Andy Bavier4a8450e2020-02-04 08:58:37 -0700322 ${podStatusOutput}= Run kubectl get pods -n ${NAMESPACE}
Gayathri.Selvanb6a2b542020-01-24 07:24:23 +0000323 Log ${podStatusOutput}
Andy Bavier4a8450e2020-02-04 08:58:37 -0700324 ${countBforRestart}= Run kubectl get pods -n ${NAMESPACE} | grep Running | wc -l
Hardik Windlass8f2aadc2020-03-16 20:16:39 +0530325 ${podName} Set Variable ofagent
Hardik Windlass79b40ff2020-06-11 22:55:47 +0530326 Wait Until Keyword Succeeds ${timeout} 15s Delete K8s Pods By Label ${NAMESPACE} app ${podName}
Gayathri.Selvanb6a2b542020-01-24 07:24:23 +0000327 Sleep 60s
Hardik Windlass79b40ff2020-06-11 22:55:47 +0530328 Wait Until Keyword Succeeds ${timeout} 2s Validate Pods Status By Label ${NAMESPACE}
329 ... app ${podName} Running
Hardik Windlass8f2aadc2020-03-16 20:16:39 +0530330 # Performing Sanity Test to make sure subscribers are all AUTH+DHCP and pingable
331 Run Keyword If ${has_dataplane} Clean Up Linux
332 Wait Until Keyword Succeeds ${timeout} 2s Perform Sanity Test
Andy Bavier4a8450e2020-02-04 08:58:37 -0700333 ${podStatusOutput}= Run kubectl get pods -n ${NAMESPACE}
Gayathri.Selvanb6a2b542020-01-24 07:24:23 +0000334 Log ${podStatusOutput}
Andy Bavier4a8450e2020-02-04 08:58:37 -0700335 ${countAfterRestart}= Run kubectl get pods -n ${NAMESPACE} | grep Running | wc -l
Gayathri.Selvanb6a2b542020-01-24 07:24:23 +0000336 Should Be Equal As Strings ${countAfterRestart} ${countBforRestart}
Hardik Windlass8f2aadc2020-03-16 20:16:39 +0530337 # Scale Down the Of-Agent Deployment
Hardik Windlass79b40ff2020-06-11 22:55:47 +0530338 Scale K8s Deployment ${NAMESPACE} voltha-voltha-ofagent 0
Hardik Windlass8f2aadc2020-03-16 20:16:39 +0530339 Sleep 30s
340 FOR ${I} IN RANGE 0 ${num_onus}
341 ${src}= Set Variable ${hosts.src[${I}]}
342 ${dst}= Set Variable ${hosts.dst[${I}]}
343 Run Keyword and Ignore Error Collect Logs
344 ${onu_device_id}= Get Device ID From SN ${src['onu']}
345 ${onu_port}= Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s
346 ... Get ONU Port in ONOS ${src['onu']} ${of_id}
347 # Verify ONU state in voltha
348 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s Validate Device
349 ... ENABLED ACTIVE REACHABLE
350 ... ${src['onu']} onu=True onu_reason=omci-flows-pushed
351 # Check ONU port is Disabled in ONOS
352 Run Keyword And Continue On Failure Wait Until Keyword Succeeds 120s 2s
Suchitra Vemuri760bdd32020-06-17 12:34:48 -0700353 ... Verify ONU Port Is Disabled ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${src['onu']}
Hardik Windlass8f2aadc2020-03-16 20:16:39 +0530354 # Verify EAPOL flows are present for the ONU port
355 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s
356 ... Verify Eapol Flows Added For ONU ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${onu_port}
357 # Verify ONU in AAA-Users
358 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2
359 ... Verify ONU in AAA-Users ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${onu_port}
360 # Verify DHCP-Allocations
361 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s
362 ... Validate Subscriber DHCP Allocation ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${onu_port}
Hardik Windlass21807632020-04-14 16:24:55 +0530363 # Verify subscriber access flows are added for the ONU port
364 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
365 ... Verify Subscriber Access Flows Added For ONU ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${of_id}
366 ... ${onu_port} ${nni_port} ${src['c_tag']} ${src['s_tag']}
Hardik Windlass8f2aadc2020-03-16 20:16:39 +0530367 # Verify Ping
368 Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure Check Ping True
369 ... ${dst['dp_iface_ip_qinq']} ${src['dp_iface_name']} ${src['ip']}
370 ... ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
371 Run Keyword and Ignore Error Get Device Output from Voltha ${onu_device_id}
372 Run Keyword and Ignore Error Collect Logs
373 END
374 # Scale Up the Of-Agent Deployment
Hardik Windlass79b40ff2020-06-11 22:55:47 +0530375 Scale K8s Deployment ${NAMESPACE} voltha-voltha-ofagent 1
Hardik Windlass8f2aadc2020-03-16 20:16:39 +0530376 Wait Until Keyword Succeeds ${waitforRestart} 2s Validate Pod Status ofagent ${NAMESPACE}
377 ... Running
378 # Performing Sanity Test to make sure subscribers are all AUTH+DHCP and pingable
379 Run Keyword If ${has_dataplane} Clean Up Linux
380 Wait Until Keyword Succeeds ${timeout} 2s Perform Sanity Test
381 Log to console Pod ${podName} restarted and sanity checks passed successfully
Gayathri.Selvanb6a2b542020-01-24 07:24:23 +0000382
Gayathri.Selvanc0b37022020-02-06 05:17:00 +0000383Check ONU adapter crash not forcing authentication again
384 [Documentation] After ONU adapter restart, checks wpa log for 'authentication started'
385 ... message count to make sure auth not started again and validates EAP status and ping.
386 ... Assuming that test1 or sanity was executed where all the ONUs are authenticated/DHCP/pingable
hwchiu14c05102020-03-27 00:44:30 +0000387 [Tags] functional ONUAdaptCrash
Andy Baviere187eda2020-04-20 15:00:02 -0700388 [Setup] Start Logging ONUAdaptCrash
Andy Bavierabeba262020-02-07 16:22:16 -0700389 [Teardown] Run Keywords Collect Logs
390 ... AND Stop Logging ONUAdaptCrash
hwchiu14c05102020-03-27 00:44:30 +0000391 # Wait for adapter to resync
392 Sleep 60s
393 # Restart the onu
Hardik Windlass79b40ff2020-06-11 22:55:47 +0530394 ${podName} Set Variable adapter-open-onu
Hung-Wei Chiu2bee4d42020-04-24 11:31:50 -0700395 Wait Until Keyword Succeeds ${timeout} 15s Delete K8s Pods By Label ${NAMESPACE} app ${podName}
hwchiu14c05102020-03-27 00:44:30 +0000396 # Validate ONU Ports
Gayathri.Selvanc0b37022020-02-06 05:17:00 +0000397 FOR ${I} IN RANGE 0 ${num_onus}
398 ${src}= Set Variable ${hosts.src[${I}]}
399 ${dst}= Set Variable ${hosts.dst[${I}]}
400 ${onu_device_id}= Get Device ID From SN ${src['onu']}
401 ${onu_port}= Wait Until Keyword Succeeds ${timeout} 2s Get ONU Port in ONOS ${src['onu']}
402 ... ${of_id}
hwchiu14c05102020-03-27 00:44:30 +0000403 Run Keyword And Continue On Failure Verify ONU Port Is Enabled ${ONOS_SSH_IP} ${ONOS_SSH_PORT}
Suchitra Vemuri760bdd32020-06-17 12:34:48 -0700404 ... ${src['onu']}
Gayathri.Selvanc0b37022020-02-06 05:17:00 +0000405 ${output}= Run Keyword If ${has_dataplane} Login And Run Command On Remote System
406 ... wpa_cli status | grep SUCCESS ${src['ip']} ${src['user']} ${src['pass']}
407 ... ${src['container_type']} ${src['container_name']}
408 Run Keyword If ${has_dataplane} Should Contain ${output} SUCCESS
Gayathri.Selvanc0b37022020-02-06 05:17:00 +0000409 END
Hung-Wei Chiu2bee4d42020-04-24 11:31:50 -0700410 Wait Until Keyword Succeeds ${timeout} 2s Validate Pods Status By Label ${NAMESPACE}
411 ... app ${podName} Running
hwchiu14c05102020-03-27 00:44:30 +0000412 # Wait for adapter to resync
413 Sleep 60s
Andy Bavier8da0e132020-04-13 10:25:16 -0700414 Run Keyword If ${has_dataplane} Clean Up Linux
hwchiu14c05102020-03-27 00:44:30 +0000415 # Perform all steps in Sanity Test except the subscriber addition
416 ${of_id}= Wait Until Keyword Succeeds ${timeout} 15s Validate OLT Device in ONOS ${olt_serial_number}
417 Set Global Variable ${of_id}
418 FOR ${I} IN RANGE 0 ${num_onus}
419 ${src}= Set Variable ${hosts.src[${I}]}
420 ${dst}= Set Variable ${hosts.dst[${I}]}
421 Run Keyword and Ignore Error Collect Logs
422 ${onu_device_id}= Get Device ID From SN ${src['onu']}
423 ${onu_port}= Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s
424 ... Get ONU Port in ONOS ${src['onu']} ${of_id}
425 # Check ONU port is Enabled in ONOS
426 Run Keyword And Continue On Failure Wait Until Keyword Succeeds 120s 2s
Suchitra Vemuri760bdd32020-06-17 12:34:48 -0700427 ... Verify ONU Port Is Enabled ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${src['onu']}
hwchiu14c05102020-03-27 00:44:30 +0000428 # Verify EAPOL flows are added for the ONU port
429 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s
430 ... Verify Eapol Flows Added For ONU ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${onu_port}
431 # Verify ONU state in voltha
432 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s Validate Device
433 ... ENABLED ACTIVE REACHABLE
434 ... ${src['onu']} onu=True onu_reason=omci-flows-pushed
435 # Perform Authentication
436 ${wpa_log}= Run Keyword If ${has_dataplane} Catenate SEPARATOR=.
437 ... /tmp/wpa ${src['dp_iface_name']} log
438 Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure Validate Authentication True
439 ... ${src['dp_iface_name']} wpa_supplicant.conf ${src['ip']} ${src['user']} ${src['pass']}
440 ... ${src['container_type']} ${src['container_name']} ${wpa_log}
441 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2
442 ... Verify ONU in AAA-Users ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${onu_port}
443 # Verify that no pending flows exist for the ONU port
444 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s
445 ... Verify No Pending Flows For ONU ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${onu_port}
Hardik Windlass21807632020-04-14 16:24:55 +0530446 # Verify subscriber access flows are added for the ONU port
447 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
448 ... Verify Subscriber Access Flows Added For ONU ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${of_id}
449 ... ${onu_port} ${nni_port} ${src['c_tag']} ${src['s_tag']}
hwchiu14c05102020-03-27 00:44:30 +0000450 Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure Validate DHCP and Ping True
451 ... True ${src['dp_iface_name']} ${src['s_tag']} ${src['c_tag']} ${dst['dp_iface_ip_qinq']}
452 ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
453 ... ${dst['dp_iface_name']} ${dst['ip']} ${dst['user']} ${dst['pass']} ${dst['container_type']}
454 ... ${dst['container_name']}
455 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s
456 ... Validate Subscriber DHCP Allocation ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${onu_port}
457 Run Keyword and Ignore Error Get Device Output from Voltha ${onu_device_id}
458 Run Keyword and Ignore Error Collect Logs
459 END
460
Gayathri.Selvanc0b37022020-02-06 05:17:00 +0000461 Run Keyword and Ignore Error Collect Logs
462
Suchitra Vemuriebf65322020-04-03 10:09:41 -0700463Sanity E2E Test for OLT/ONU on POD With Core Fail and Restart
464 [Documentation] Deploys an device instance and waits for it to authenticate. After
465 ... authentication is successful the rw-core deployment is scaled to 0 instances to
466 ... simulate a POD crash. The test then scales the rw-core back to a single instance
467 ... and configures ONOS for access. The test succeeds if the device is able to
468 ... complete the DHCP sequence.
469 [Tags] functional rwcore-restart
Andy Baviere187eda2020-04-20 15:00:02 -0700470 [Setup] Run Keywords Start Logging RwCoreFailAndRestart
Suchitra Vemuriebf65322020-04-03 10:09:41 -0700471 ... AND Clear All Devices Then Create New Device
472 [Teardown] Run Keywords Collect Logs
473 ... AND Stop Logging RwCoreFailAndRestart
Suchitra Vemuri5d3383f2020-04-03 11:02:26 -0700474 #... AND Delete Device and Verify
Suchitra Vemuriebf65322020-04-03 10:09:41 -0700475 Run Keyword and Ignore Error Collect Logs
476 Run Keyword If ${has_dataplane} Clean Up Linux
477 ${of_id}= Wait Until Keyword Succeeds ${timeout} 15s Validate OLT Device in ONOS ${olt_serial_number}
478 Set Global Variable ${of_id}
Hardik Windlasse05e4712020-04-29 10:40:42 +0530479 ${nni_port}= Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s
480 ... Get NNI Port in ONOS ${of_id}
481 Set Global Variable ${nni_port}
Suchitra Vemuriebf65322020-04-03 10:09:41 -0700482 FOR ${I} IN RANGE 0 ${num_onus}
483 ${src}= Set Variable ${hosts.src[${I}]}
484 ${dst}= Set Variable ${hosts.dst[${I}]}
485 ${onu_device_id}= Get Device ID From SN ${src['onu']}
486 ${onu_port}= Wait Until Keyword Succeeds ${timeout} 2s Get ONU Port in ONOS ${src['onu']}
487 ... ${of_id}
488 # Bring up the device and verify it authenticates
489 Wait Until Keyword Succeeds ${timeout} 5s Validate Device ENABLED ACTIVE REACHABLE
490 ... ${onu_device_id} onu=True onu_reason=omci-flows-pushed
491 Wait Until Keyword Succeeds ${timeout} 2s Verify Eapol Flows Added For ONU ${ONOS_SSH_IP}
492 ... ${ONOS_SSH_PORT} ${onu_port}
493 ${wpa_log}= Run Keyword If ${has_dataplane} Catenate SEPARATOR=.
494 ... /tmp/wpa ${src['dp_iface_name']} log
495 Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure Validate Authentication True
496 ... ${src['dp_iface_name']} wpa_supplicant.conf ${src['ip']} ${src['user']} ${src['pass']}
497 ... ${src['container_type']} ${src['container_name']} ${wpa_log}
498 Wait Until Keyword Succeeds ${timeout} 2s Verify ONU in AAA-Users ${ONOS_SSH_IP}
499 ... ${ONOS_SSH_PORT} ${onu_port}
500 END
501
502 # Scale down the rw-core deployment to 0 PODs and once confirmed, scale it back to 1
Hardik Windlass79b40ff2020-06-11 22:55:47 +0530503 Scale K8s Deployment voltha voltha-voltha-rw-core 0
504 Wait Until Keyword Succeeds ${timeout} 2s Pod Does Not Exist voltha voltha-voltha-rw-core
Suchitra Vemuriebf65322020-04-03 10:09:41 -0700505 # Ensure the ofagent POD goes "not-ready" as expected
506 Wait Until keyword Succeeds ${timeout} 2s
Hardik Windlass79b40ff2020-06-11 22:55:47 +0530507 ... Check Expected Available Deployment Replicas voltha voltha-voltha-ofagent 0
Suchitra Vemuriebf65322020-04-03 10:09:41 -0700508 # Scale up the core deployment and make sure both it and the ofagent deployment are back
Hardik Windlass79b40ff2020-06-11 22:55:47 +0530509 Scale K8s Deployment voltha voltha-voltha-rw-core 1
Suchitra Vemuriebf65322020-04-03 10:09:41 -0700510 Wait Until Keyword Succeeds ${timeout} 2s
Hardik Windlass79b40ff2020-06-11 22:55:47 +0530511 ... Check Expected Available Deployment Replicas voltha voltha-voltha-rw-core 1
Suchitra Vemuriebf65322020-04-03 10:09:41 -0700512 Wait Until Keyword Succeeds ${timeout} 2s
Hardik Windlass79b40ff2020-06-11 22:55:47 +0530513 ... Check Expected Available Deployment Replicas voltha voltha-voltha-ofagent 1
Suchitra Vemuriebf65322020-04-03 10:09:41 -0700514 # For some reason scaling down and up the POD behind a service causes the port forward to stop working,
515 # so restart the port forwarding for the API service
David Bainbridge07321ff2020-06-12 13:55:42 -0700516 Restart VOLTHA Port Forward voltha-api
Suchitra Vemuriebf65322020-04-03 10:09:41 -0700517 # Ensure that the ofagent pod is up and ready and the device is available in ONOS, this
518 # represents system connectivity being restored
519 Wait Until Keyword Succeeds ${timeout} 2s Device Is Available In ONOS
520 ... http://karaf:karaf@${ONOS_REST_IP}:${ONOS_REST_PORT} ${of_id}
521
522 FOR ${I} IN RANGE 0 ${num_onus}
Andy Bavier52094622020-05-12 15:54:24 -0700523 ${src}= Set Variable ${hosts.src[${I}]}
524 ${dst}= Set Variable ${hosts.dst[${I}]}
525 ${onu_port}= Wait Until Keyword Succeeds ${timeout} 2s Get ONU Port in ONOS ${src['onu']}
526 ... ${of_id}
Suchitra Vemuriebf65322020-04-03 10:09:41 -0700527 # Add subscriber access and verify that DHCP completes to ensure system is still functioning properly
528 Wait Until Keyword Succeeds ${timeout} 2s Execute ONOS CLI Command ${ONOS_SSH_IP}
529 ... ${ONOS_SSH_PORT} volt-add-subscriber-access ${of_id} ${onu_port}
Hardik Windlass21807632020-04-14 16:24:55 +0530530 # Verify subscriber access flows are added for the ONU port
531 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
532 ... Verify Subscriber Access Flows Added For ONU ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${of_id}
533 ... ${onu_port} ${nni_port} ${src['c_tag']} ${src['s_tag']}
Suchitra Vemuriebf65322020-04-03 10:09:41 -0700534 Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure Validate DHCP and Ping True
535 ... True ${src['dp_iface_name']} ${src['s_tag']} ${src['c_tag']} ${dst['dp_iface_ip_qinq']}
536 ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
537 ... ${dst['dp_iface_name']} ${dst['ip']} ${dst['user']} ${dst['pass']} ${dst['container_type']}
538 ... ${dst['container_name']}
539 Wait Until Keyword Succeeds ${timeout} 2s Run Keyword And Continue On Failure
540 ... Validate Subscriber DHCP Allocation ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${onu_port}
541 END
542
Hema123aff52020-05-26 15:41:47 +0530543Verify ONU Soft Reboot
544 [Documentation] Test soft reboot of the ONU using voltctl command
545 [Tags] VOL-1957 ONUSoftReboot notready
546 [Setup] Start Logging ONUSoftReboot
547 #... AND Setup
Andy Bavier4a8450e2020-02-04 08:58:37 -0700548 [Teardown] Run Keywords Collect Logs
Hema123aff52020-05-26 15:41:47 +0530549 ... AND Stop Logging ONUSoftReboot
550 #... AND Delete Device and Verify
551 # Performing Sanity Test to make sure subscribers are all AUTH+DHCP and pingable
552 #Run Keyword If ${has_dataplane} Clean Up Linux
553 #Wait Until Keyword Succeeds ${timeout} 2s Perform Sanity Test
554 #Reboot the ONU and verify that ping fails
Gayathri.Selvanf68ea4b2020-02-03 07:36:39 +0000555 FOR ${I} IN RANGE 0 ${num_onus}
556 ${src}= Set Variable ${hosts.src[${I}]}
557 ${dst}= Set Variable ${hosts.dst[${I}]}
558 ${onu_device_id}= Get Device ID From SN ${src['onu']}
Suchitra Vemuricd2f64f2020-02-18 18:30:27 -0800559 ${onu_port}= Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s
560 ... Get ONU Port in ONOS ${src['onu']} ${of_id}
Hema123aff52020-05-26 15:41:47 +0530561 Reboot Device ${onu_device_id}
562 Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure
563 ... Wait Until Keyword Succeeds 60s 2s
564 ... Check Ping False ${dst['dp_iface_ip_qinq']} ${src['dp_iface_name']}
565 ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
566 # Remove Subscriber Access (To replicate ATT workflow)
567 Wait Until Keyword Succeeds ${timeout} 2s Execute ONOS CLI Command ${ONOS_SSH_IP}
568 ... ${ONOS_SSH_PORT} volt-remove-subscriber-access ${of_id} ${onu_port}
Gayathri.Selvanf68ea4b2020-02-03 07:36:39 +0000569 Verify ping is succesful except for given device ${num_onus} ${onu_device_id}
Hema123aff52020-05-26 15:41:47 +0530570 Sleep 40s
Suchitra Vemuricd2f64f2020-02-18 18:30:27 -0800571 # Check ONU port is Enabled in ONOS
572 Run Keyword And Continue On Failure Wait Until Keyword Succeeds 120s 2s
Suchitra Vemuri760bdd32020-06-17 12:34:48 -0700573 ... Verify ONU Port Is Enabled ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${src['onu']}
Suchitra Vemuricd2f64f2020-02-18 18:30:27 -0800574 # Verify EAPOL flows are added for the ONU port
575 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s
ubuntu6b6e7d42020-03-02 12:35:42 -0800576 ... Verify Eapol Flows Added For ONU ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${onu_port}
Suchitra Vemuricd2f64f2020-02-18 18:30:27 -0800577 # Verify ONU state in voltha
578 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s Validate Device
579 ... ENABLED ACTIVE REACHABLE
580 ... ${src['onu']} onu=True onu_reason=omci-flows-pushed
Hema123aff52020-05-26 15:41:47 +0530581 Run Keyword If ${has_dataplane} Clean Up Linux
582 # Perform Authentication
583 ${wpa_log}= Run Keyword If ${has_dataplane} Catenate SEPARATOR=.
584 ... /tmp/wpa ${src['dp_iface_name']} log
585 Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure Validate Authentication True
586 ... ${src['dp_iface_name']} wpa_supplicant.conf ${src['ip']} ${src['user']} ${src['pass']}
587 ... ${src['container_type']} ${src['container_name']} ${wpa_log}
588 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2
589 ... Verify ONU in AAA-Users ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${onu_port}
590 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2
591 ... Execute ONOS CLI Command ${ONOS_SSH_IP} ${ONOS_SSH_PORT}
592 ... volt-add-subscriber-access ${of_id} ${onu_port}
593 # Verify that no pending flows exist for the ONU port
594 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s
595 ... Verify No Pending Flows For ONU ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${onu_port}
Hardik Windlass21807632020-04-14 16:24:55 +0530596 # Verify subscriber access flows are added for the ONU port
597 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
598 ... Verify Subscriber Access Flows Added For ONU ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${of_id}
599 ... ${onu_port} ${nni_port} ${src['c_tag']} ${src['s_tag']}
Hema123aff52020-05-26 15:41:47 +0530600 Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure Validate DHCP and Ping True
601 ... True ${src['dp_iface_name']} ${src['s_tag']} ${src['c_tag']} ${dst['dp_iface_ip_qinq']}
Suchitra Vemuricd2f64f2020-02-18 18:30:27 -0800602 ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
Hema123aff52020-05-26 15:41:47 +0530603 ... ${dst['dp_iface_name']} ${dst['ip']} ${dst['user']} ${dst['pass']} ${dst['container_type']}
604 ... ${dst['container_name']}
605 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s
606 ... Validate Subscriber DHCP Allocation ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${onu_port}
607 Run Keyword and Ignore Error Get Device Output from Voltha ${onu_device_id}
608 Run Keyword And Ignore Error Collect Logs
Gayathri.Selvanf68ea4b2020-02-03 07:36:39 +0000609 END
Suchitra Vemurif7a033c2020-02-26 17:22:41 -0800610
611*** Keywords ***
612Setup Suite
613 [Documentation] Set up the test suite
614 Common Test Suite Setup
HungWei Chiu1408fb92020-03-03 19:43:30 -0500615 #power_switch.robot needs it to support different vendor's power switch
Hung-Wei Chiufcc6d8e2020-03-10 12:05:11 -0700616 ${switch_type}= Get Variable Value ${web_power_switch.type}
617 Run Keyword If "${switch_type}"!="" Set Global Variable ${powerswitch_type} ${switch_type}
Suchitra Vemurif7a033c2020-02-26 17:22:41 -0800618
619Clear All Devices Then Create New Device
620 [Documentation] Remove any devices from VOLTHA and ONOS
621 # Remove all devices from voltha and nos
622 Delete All Devices and Verify
623 # Execute normal test Setup Keyword
624 Setup